-
Ultra-High-Temperature Vacuum Prober for Electrical and Thermal Measurements
Authors:
Laurent Jalabert,
Jose Ordonez-Miranda,
Yunhui Wu,
Byunggi Kim,
Roman Anufriev,
Masahiro Nomura,
Sebastian Volz
Abstract:
We develop an ultra-high-temperature vacuum probe station (UHT-VPS) featuring a sample holder heated by thermal radiation from a silicon carbide heater. This contactless configuration electrically isolates the sample from the high-power heating source through a vacuum gap, ensuring reliable measurements under extreme conditions. The capability of this UHT-VPS to measure electrical signals from 30…
▽ More
We develop an ultra-high-temperature vacuum probe station (UHT-VPS) featuring a sample holder heated by thermal radiation from a silicon carbide heater. This contactless configuration electrically isolates the sample from the high-power heating source through a vacuum gap, ensuring reliable measurements under extreme conditions. The capability of this UHT-VPS to measure electrical signals from 30 nV upward on bulk sapphire is demonstrated using the 3w/2w method. Measurements are continuously operated from 300 to 1150 K, under high vacuum, for a total of about 66 hours without readjusting the contact. They yield the linear and quadratic temperature coefficients of resistance of chromium/platinum micro-resistances, as well as the sapphire's thermal conductivity and thermal diffusivity. By recording the heater and sensor temperature signals up to 30 kHz and fitting them with theoretical models that account for the quadratic TCR of Cr/Pt microwires, we obtain values in agreement with literature data obtained by optical methods. In this temperature range, we also measure thermal conductivity, which cannot be directly accessed by optical techniques. Our system thus provides an effective solution for simultaneously retrieving the electrical and thermal properties of materials using a single set of 3w/2w data up to unprecedented temperature levels.
△ Less
Submitted 27 June, 2025;
originally announced June 2025.
-
Piezoelectrically driven diamond phononic nanocavity by phonon-matching scheme for quantum applications
Authors:
Michele Diego,
Byunggi Kim,
Matteo Pirro,
Sebastian Volz,
Masahiro Nomura
Abstract:
Efficiently exciting and controlling phonons in diamond nanoresonators represents a fundamental challenge for quantum applications. Here, we theoretically demonstrate the possibility to excite mechanical modes within a double-hybrid-cavity (DHC), formed by adjoining to a diamond cavity a second cavity, made of aluminum nitride. The latter is piezoelectric and serves as a microwave-to-phonon transd…
▽ More
Efficiently exciting and controlling phonons in diamond nanoresonators represents a fundamental challenge for quantum applications. Here, we theoretically demonstrate the possibility to excite mechanical modes within a double-hybrid-cavity (DHC), formed by adjoining to a diamond cavity a second cavity, made of aluminum nitride. The latter is piezoelectric and serves as a microwave-to-phonon transducer, activating mechanical modes in the entire DHC. We show the process to match the cavities phononic properties, making them work coordinately in the DHC and obtaining a well confined mode. In the diamond part of the cavity, this mode replicates the fundamental mode of the individual diamond cavity, showing that the piezoelectric transducer doesn't alter the diamond individual fundamental mode. In the piezoelectric part, the strong confinement of stress and electric field results in a high piezoelectric coupling rate, demonstrating the effectiveness of a phononic cavity as a transducer. The study is contextualized in the framework of a quantum networking application, where the DHC serves as a spin qubit, exploiting the spin-mechanical coupling within diamond color centers.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Polaritonic Waveguide Emits Super-Planckian Thermal Radiation
Authors:
Saeko Tachikawa,
Jose Ordonez-Miranda,
Laurent Jalabert,
Yunhui Wu,
Yangyu Guo,
Roman Anufriev,
Byunggi Kim,
Hiroyuki Fujita,
Sebastian Volz,
Masahiro Nomura
Abstract:
Classical Planck's theory of thermal radiation predicts an upper limit of the heat transfer between two bodies separated by a distance longer than the dominant radiation wavelength (far-field regime). This limit can be overcome when the dimensions of the absorbent bodies are smaller than the dominant wavelength due to hybrid electromagnetic waves, known as surface phonon-polaritons (SPhPs). Here,…
▽ More
Classical Planck's theory of thermal radiation predicts an upper limit of the heat transfer between two bodies separated by a distance longer than the dominant radiation wavelength (far-field regime). This limit can be overcome when the dimensions of the absorbent bodies are smaller than the dominant wavelength due to hybrid electromagnetic waves, known as surface phonon-polaritons (SPhPs). Here, we experimentally demonstrate that the far-field radiative heat transfer between two non-absorbent bodies can also overcome Planck's limit, by coating them with an absorbent material to form a polaritonic waveguide. This super-Planckian far-field thermal radiation is confirmed by measuring the radiative thermal conductance between two silicon plates coated with silicon dioxide nanolayers. The observed conductance is twice higher than Planck's limit and agrees with the predictions of our model for the SPhP waveguide modes. Our findings could be applied to thermal management in microelectronics and silicon photonics.
△ Less
Submitted 5 January, 2023;
originally announced January 2023.
-
Magic angle in thermal conductivity of twisted bilayer graphene
Authors:
Yajuan Cheng,
Zheyong Fan,
Tao Zhang,
Masahiro Nomura,
Sebastian Volz,
Guimei Zhu,
Baowen Li,
Shiyun Xiong
Abstract:
We report a local minimum in thermal conductivity in twisted bilayer graphene (TBG) at the angle of 1.08$^\circ$, which corresponds to the 'magic angle' in the transition of several other reported properties. Within the supercell of a moiré lattice, different stacking modes generate phonon scattering sites which reduce the thermal conductivity of TBG. The thermal magic angle arises from the compet…
▽ More
We report a local minimum in thermal conductivity in twisted bilayer graphene (TBG) at the angle of 1.08$^\circ$, which corresponds to the 'magic angle' in the transition of several other reported properties. Within the supercell of a moiré lattice, different stacking modes generate phonon scattering sites which reduce the thermal conductivity of TBG. The thermal magic angle arises from the competition between the delocalization of atomic vibrational amplitudes and stresses on one hand, and the increased AA stacking density on the other hand. The former effect weakens the scattering strength of a single scatterer while the latter one increases the density of scatterers. The combination of these two effects eventually leads to the apparition of the highlighted irregularity in heat conduction. The manifestation of a magic angle, disclosing new thermal mechanisms at nanoscale, further uncovers the unique physics of two-dimensional materials.
△ Less
Submitted 13 February, 2023; v1 submitted 31 December, 2022;
originally announced January 2023.
-
Lattice thermal conductivity and elastic modulus of XN4 (X=Be, Mg and Pt) 2D materials using machine learning interatomic potentials
Authors:
K. Ghorbani,
P. Mirchi,
S. Arabha,
Ali Rajabpour,
Sebastian Volz
Abstract:
The newly synthesized BeN4 monolayer has introduced a novel group of 2D materials called nitrogen-rich 2D materials. In the present study, the anisotropic mechanical and thermal properties of three members of this group, BeN4, MgN4, and PtN4, are investigated. To this end, a machine learning-based interatomic potential (MLIP) is developed on the basis of the moment tensor potential (MTP) method an…
▽ More
The newly synthesized BeN4 monolayer has introduced a novel group of 2D materials called nitrogen-rich 2D materials. In the present study, the anisotropic mechanical and thermal properties of three members of this group, BeN4, MgN4, and PtN4, are investigated. To this end, a machine learning-based interatomic potential (MLIP) is developed on the basis of the moment tensor potential (MTP) method and utilized in classical molecular dynamics (MD) simulation. Mechanical properties are calculated by extracting the stress-strain curve and thermal properties by non-equilibrium molecular dynamics (NEMD) method. Acquired results show the anisotropic elastic modulus and lattice thermal conductivity of these materials. Generally, elastic modulus and thermal conductivity in the armchair direction are higher than in the zigzag direction. Also, the elastic anisotropy is almost constant at every temperature for BeN4 and MgN4, while for PtN4, this parameter is decreased by increasing the temperature. The findings of this research are not only evidence of the application of machine learning in MD simulations, but also provide information on the basic anisotropic mechanical and thermal properties of these newly discovered 2D nanomaterials.
△ Less
Submitted 30 November, 2022;
originally announced December 2022.
-
Modulating Thermal Conductivity via Targeted Phonon Excitation
Authors:
Xiao Wan,
Dongkai Pan,
Jing-Tao Lü,
Sebastian Volz,
Lifa Zhang,
Qing Hao,
Yangjun Qin,
Zhicheng Zong,
Nuo Yang
Abstract:
Thermal conductivity is a critical material property in numerous applications, such as those related to thermoelectric devices and heat dissipation. Effectively modulating thermal conductivity has become a great concern in the field of heat conduction. In this study, a quantum strategy is proposed to modulate thermal conductivity by exciting targeted phonons. The results show that the thermal cond…
▽ More
Thermal conductivity is a critical material property in numerous applications, such as those related to thermoelectric devices and heat dissipation. Effectively modulating thermal conductivity has become a great concern in the field of heat conduction. In this study, a quantum strategy is proposed to modulate thermal conductivity by exciting targeted phonons. The results show that the thermal conductivity of graphene can be tailored in the range of 1559 W/m-K (49%) to 4093 W/m-K (128%), compared with the intrinsic value of 3189 W/m-K. A similar trend is also observed for graphene nanoribbons. The results are obtained through both ab initio calculations and molecular dynamics simulations. This brand-new quantum strategy to modulate thermal conductivity paves a way for quantum heat conduction.
△ Less
Submitted 5 April, 2023; v1 submitted 20 September, 2022;
originally announced September 2022.
-
Observation of phonon Poiseuille flow in isotopically-purified graphite ribbons
Authors:
Xin Huang,
Yangyu Guo,
Yunhui Wu,
Satoru Masubuchi,
Kenji Watanabe,
Takashi Taniguchi,
Zhongwei Zhang,
Sebastian Volz,
Tomoki Machida,
Masahiro Nomura
Abstract:
In recent times, the unique collective transport physics of phonon hydrodynamics motivates theoreticians and experimentalists to explore it in micro- and nanoscale and at elevated temperatures. Graphitic materials have been predicted to facilitate hydrodynamic heat transport with their intrinsically strong normal scattering. However, owing to the experimental difficulties and vague theoretical und…
▽ More
In recent times, the unique collective transport physics of phonon hydrodynamics motivates theoreticians and experimentalists to explore it in micro- and nanoscale and at elevated temperatures. Graphitic materials have been predicted to facilitate hydrodynamic heat transport with their intrinsically strong normal scattering. However, owing to the experimental difficulties and vague theoretical understanding, the observation of phonon Poiseuille flow in graphitic systems remains challenging. In this study, based on a microscale experimental platform and the pertinent occurrence criterion in anisotropic solids, we demonstrate the phonon Poiseuille flow in a 5 μm-wide suspended graphite ribbon with purified 13C isotope concentration. Our observation is well supported by our theoretical model based on a kinetic theory with fully first-principles inputs. Thus, this study paves the way for deeper insight into phonon hydrodynamics and cutting-edge heat manipulating applications.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Quasilocalized Vibrational Modes as Efficient Heat Carriers in Glasses
Authors:
Xing Xiang,
Sylvain Patinet,
Sebastian Volz,
Yanguang Zhou
Abstract:
While soft quasilocalized vibrational modes are known to populate the low-frequency spectrum of glassy solids, their contribution to thermal properties is still not fully elucidated. We numerically show that, despite their spatially localized nature, these modes are as effective heat carriers as the delocalized ones and can contribute non-negligible to the total thermal conductivity in the low-tem…
▽ More
While soft quasilocalized vibrational modes are known to populate the low-frequency spectrum of glassy solids, their contribution to thermal properties is still not fully elucidated. We numerically show that, despite their spatially localized nature, these modes are as effective heat carriers as the delocalized ones and can contribute non-negligible to the total thermal conductivity in the low-temperature regime, especially for T < 0.05 Tg where Tg is the glass transition temperature. We further prove that the mutual coherence between the low-frequency quasilocalized modes and other modes explains this high thermal exchange performance. Our finding finally provides a perspective on the thermal transport behaviour of the low-frequency quasilocalized modes in glassy solids.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
Observation of quasi-ballistic thermal transport of surface phonon-polaritons over hundreds of micrometres
Authors:
Yunhui Wu,
Jose Ordonez-Miranda,
Laurent Jalabert,
Saeko Tachikawa,
Roman Anufriev,
Hiroyuki Fujita,
Sebastian Volz,
Masahiro Nomura
Abstract:
Long-distance propagation of heat carriers is essential for efficient heat dissipation in microelectronics. However, in dielectric nanomaterials, the primary heat carriers - phonons - can propagate ballistically only for hundreds of nanometres, which limits their heat conduction efficiency. Theory predicts that surface phonon-polaritons (SPhPs) can overcome this limitation and conduct heat without…
▽ More
Long-distance propagation of heat carriers is essential for efficient heat dissipation in microelectronics. However, in dielectric nanomaterials, the primary heat carriers - phonons - can propagate ballistically only for hundreds of nanometres, which limits their heat conduction efficiency. Theory predicts that surface phonon-polaritons (SPhPs) can overcome this limitation and conduct heat without dissipation for hundreds of micrometres. In this work, we experimentally demonstrate such long-distance heat transport by SPhPs. Using the 3$ω$ technique, we measure the in-plane thermal conductivity of SiN nanomembranes for different heater-sensor distances (100 and 200 $μ$m), membrane thicknesses (30 - 200 nm), and temperatures (300 - 400 K). We find that in contrast with thick membranes, thin nanomembranes support heat conduction by SPhPs, as evidenced by an increase in the thermal conductivity with temperature. Remarkably, the thermal conductivity measured 200 $μ$m away from the heater are consistently higher than that measured 100 $μ$m closer. This result suggests that heat conduction by SPhPs is quasi-ballistic over at least hundreds of micrometres. Thus, our findings show that SPhPs can enhance heat dissipation in polar nanomembranes and find applications in thermal management, near-field radiation, and polaritonics.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Thermal conductivity minimum of graded superlattices due to phonon localization
Authors:
Yangyu Guo,
Marc Bescond,
Zhongwei Zhang,
Shiyun Xiong,
Kazuhiko Hirakawa,
Masahiro Nomura,
Sebastian Volz
Abstract:
The Anderson localization of thermal phonons has been shown only in few nano-structures with strong random disorder by the exponential decay of transmission to zero and a thermal conductivity maximum when increasing system length. In this work, we present a path to demonstrate the phonon localization with distinctive features in graded superlattices with short-range order and long-range disorder.…
▽ More
The Anderson localization of thermal phonons has been shown only in few nano-structures with strong random disorder by the exponential decay of transmission to zero and a thermal conductivity maximum when increasing system length. In this work, we present a path to demonstrate the phonon localization with distinctive features in graded superlattices with short-range order and long-range disorder. A thermal conductivity minimum with system length appears due to the exponential decay of transmission to a non-zero constant, which is a feature of partial phonon localization caused by the moderate disorder. We provide clear evidence of localization through the combined analysis of the participation ratio, transmission, and real-space phonon number density distribution based on our quantum transport simulation. The present work would promote heat conduction engineering by localization via the wave nature of phonons.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
Anharmonic phonon-phonon scattering at interface by non-equilibrium Green's function formalism
Authors:
Yangyu Guo,
Zhongwei Zhang,
Marc Bescond,
Shiyun Xiong,
Masahiro Nomura,
Sebastian Volz
Abstract:
The understanding and modeling of inelastic scattering of thermal phonons at a solid/solid interface remain an open question. We present a fully quantum theoretical scheme to quantify the effect of anharmonic phonon-phonon scattering at an interface via non-equilibrium Green's function (NEGF) formalism. Based on the real-space scattering rate matrix, a decomposition of the interfacial spectral ene…
▽ More
The understanding and modeling of inelastic scattering of thermal phonons at a solid/solid interface remain an open question. We present a fully quantum theoretical scheme to quantify the effect of anharmonic phonon-phonon scattering at an interface via non-equilibrium Green's function (NEGF) formalism. Based on the real-space scattering rate matrix, a decomposition of the interfacial spectral energy exchange is made into contributions from local and non-local anharmonic interactions, of which the former is shown to be predominant for high-frequency phonons whereas both are important for low-frequency phonons. The anharmonic decay of interfacial phonon modes is revealed to play a crucial role in bridging the bulk modes across the interface. The overall quantitative contribution of anharmonicity to thermal boundary conductance is found to be moderate. The present work promotes a deeper understanding of heat transport at the interface and an intuitive interpretation of anharmonic phonon NEGF formalism.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
The Origin of the Glass-like Thermal Conductivity in Crystalline Metal-Organic Frameworks
Authors:
Yanguang Zhou,
Yufei Gao,
Sebastian Volz
Abstract:
It is textbookly regarded that phonons, i.e., an energy quantum of propagating lattice waves, are the main heat carriers in perfect crystals. As a result, in many crystals, e.g., bulk silicon, the temperature-dependent thermal conductivity shows the classical 1/T relationship because of the dominant Umklapp phonon-phonon scattering in the systems. However, the thermal conductivity of many crystall…
▽ More
It is textbookly regarded that phonons, i.e., an energy quantum of propagating lattice waves, are the main heat carriers in perfect crystals. As a result, in many crystals, e.g., bulk silicon, the temperature-dependent thermal conductivity shows the classical 1/T relationship because of the dominant Umklapp phonon-phonon scattering in the systems. However, the thermal conductivity of many crystalline metal-organic frameworks is very low and shows no, a weakly negative and even a weakly positive temperature dependence (glass-like thermal conductivity). It has been in debate whether the thermal transport can be still described by phonons in metal-organic frameworks. Here, by studying two typical systems, i.e., crystal zeolitic imidazolate framework-4 (cZIF-4) and crystal zeolitic imidazolate framework-62 (c-ZIF62), we prove that the ultralow thermal conductivity in metal-organic frameworks is resulting from the strong phonon intrinsic structure scattering due to the large mass difference and the large cavity between Zn and N atoms. Our mean free path spectrum analysis shows that both propagating and non-propagating anharmonic vibrational modes exist in the systems, and contribute largely to the thermal conductivity. The corresponding weakly negative or positive temperature dependence of the thermal conductivity is stemming from the competition between the propagating and non-propagating anharmonic vibrational modes. Our study here provides a fundamental understanding of thermal transport in metal-organic frameworks and will guide the design of the thermal-related applications using metal-organic frameworks, e.g., inflammable gas storage, chemical catalysis, solar thermal conversion and so on.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Quantum mechanical modeling of anharmonic phonon-phonon scattering in nanostructures
Authors:
Yangyu Guo,
Marc Bescond,
Zhongwei Zhang,
Mathieu Luisier,
Masahiro Nomura,
Sebastian Volz
Abstract:
The coherent quantum effect becomes increasingly important in the heat dissipation bottleneck of semiconductor nanoelectronics with the characteristic size shrinking down to few nano-meters scale nowadays. However, the quantum mechanical model remains elusive for anharmonic phonon-phonon scattering in extremely small nanostructures with broken translational symmetry. It is a long-term challenging…
▽ More
The coherent quantum effect becomes increasingly important in the heat dissipation bottleneck of semiconductor nanoelectronics with the characteristic size shrinking down to few nano-meters scale nowadays. However, the quantum mechanical model remains elusive for anharmonic phonon-phonon scattering in extremely small nanostructures with broken translational symmetry. It is a long-term challenging task to correctly simulate quantum heat transport including anharmonic scattering at a scale relevant to practical applications. In this article, we present a clarified theoretical formulation of anharmonic phonon non-equilibrium Green function (NEGF) formalism for both 1D and 3D nanostructures, through a diagrammatic perturbation expansion and an introduction of Fourier representation to both harmonic and anharmonic terms. A parallelized computational framework with first-principle force constants input is developed for large-scale quantum heat transport simulation. Some crucial approximations in numerical implementation are investigated to ensure the balance between numerical accuracy and efficiency. A quantitative validation is demonstrated for the anharmonic phonon NEGF formalism and computational framework by modeling cross-plane heat transport through silicon thin film. The phonon-phonon scattering is shown to be appreciable and to introduce about 20% reduction of thermal conductivity at room temperature even for a film thickness around 10 nm. The present methodology provides a robust platform for the device quantum thermal modeling, as well as the study on the transition from coherent to incoherent heat transport in nano-phononic crystals. This work thus paves the way to understand and to manipulate heat conduction via the wave nature of phonons.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Revisiting thermal conductivity and interface conductance at the nanoscale
Authors:
B. Davier,
P. Dollfus,
S. Volz,
J. Shiomi,
J. Saint-Martin
Abstract:
A semi-analytical model for studying thermal transport at the nanoscale, able to accurately describe both the effect of out of equilibrium transport and the thermal transfer at interfaces, is presented. Our approach is based on the definition of pseudo local temperatures distinguishing the phonon populations according to the direction of their velocity. This formalism leads to a complete set of eq…
▽ More
A semi-analytical model for studying thermal transport at the nanoscale, able to accurately describe both the effect of out of equilibrium transport and the thermal transfer at interfaces, is presented. Our approach is based on the definition of pseudo local temperatures distinguishing the phonon populations according to the direction of their velocity. This formalism leads to a complete set of equations capturing the heat transfer in nanostructures even in the case of hetero-structures. This model only requires introducing a new intrinsic thermal parameter called ballistic thermal conductance and a geometric one called the effective thermal conductivity. Finally, this model is able to reproduce accurately advanced numerical results of Monte Carlo simulation for phonons in all phonon transport regime: diffusive (as the Fourier heat transport regime is included), ballistic, and intermediate ones even if thermal interface are involved. This formalism should provide new insights in the interpretation of experimental measurements.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Thermal Transfer in Amorphous Superionic Systems
Authors:
Yanguang Zhou,
Sebastian Volz
Abstract:
Using direct atomic simulations, the vibration scattering time scales are characterized, and then the nature and the quantitative weight of thermal excitations are investigated in an example system Li2S from its amorphous solid state to its partial-solid partial-liquid and, liquid states. For the amorphous solid state at 300 K, the vibration scattering time ranges a few femtoseconds to several pic…
▽ More
Using direct atomic simulations, the vibration scattering time scales are characterized, and then the nature and the quantitative weight of thermal excitations are investigated in an example system Li2S from its amorphous solid state to its partial-solid partial-liquid and, liquid states. For the amorphous solid state at 300 K, the vibration scattering time ranges a few femtoseconds to several picoseconds. As a result, both the progagons and diffusons are the main heat carriers and contribute largely to the total thermal conductivity. The enhancement of scattering among vibrations and between vibrations and free ions flow due to the increase of temperature, will lead to a large reduction of the scattering time scale and the acoustic vibrational thermal conductivity, i.e., 0.8 W/mK at 300 K to 0.56 W/mK in the partial solid partial liquid Li2S at 700 K. In this latter state, the thermal conductivity contributed by convection increases to the half of the total, as a result of the usually neglected cross-correlation between the virial term and the free ions' flow. The vibrational scattering time can be as large as ~ 1.5 picoseconds yet, and the vibrational conductivity is reduced to a still significant 0.42 W/mK highlighting the unexpected role of acoustic transverse and longitudinal vibrations in liquid Li2S at 1100 K. At this same temperature, the convection heat transfer takes overreaching 0.63 W/mK. Our study provides a fundamental understanding of the thermal excitations at play in amorphous materials from solid to liquid.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Self-synchronization of thermal phonons at equilibrium
Authors:
Zhongwei Zhang,
Yangyu Guo,
Marc Bescond,
Jie Chen,
Masahiro Nomura,
Sebastian Volz
Abstract:
Self-synchronization is a ubiquitous phenomenon in nature, in which oscillators are collectively locked in frequency and phase through mutual interactions. While self-synchronization requires the forced excitation of at least one of the oscillators, we demonstrate that this mechanism spontaneously appears due to the activation from thermal fluctuations. By performing molecular dynamic simulations,…
▽ More
Self-synchronization is a ubiquitous phenomenon in nature, in which oscillators are collectively locked in frequency and phase through mutual interactions. While self-synchronization requires the forced excitation of at least one of the oscillators, we demonstrate that this mechanism spontaneously appears due to the activation from thermal fluctuations. By performing molecular dynamic simulations, we demonstrate the self-synchronization of thermal phonons in a platform supporting doped silicon resonators. We find that thermal phonons are spontaneously converging to the same frequency and phase. In addition, the dependencies to intrinsic frequency difference and coupling strength agree well with the Kuramoto model predictions. More interestingly, we find that a balance between energy dissipation resulting from phonon-phonon scattering and potential energy between oscillators is required to maintain synchronization. Finally, a wavelet transform approach corroborates the generation of coherent thermal phonons in the collective state of oscillators. Our study provides a new perspective on self-synchronization and on the relationship between fluctuations and coherence.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
A generalized decay law for particle- and wave-like thermal phonons
Authors:
Zhongwei Zhang,
Yangyu Guo,
Marc Bescond,
Jie Chen,
Masahiro Nomura,
Sebastian Volz
Abstract:
Our direct atomic simulations reveal that a thermally activated phonon mode involves a large population of elastic wavepackets. These excitations are characterized by a wide distribution of lifetimes and coherence times expressing particle- and wave-like natures. In agreement with direct simulations, our theoretical derivation yields a generalized law for the decay of the phonon number taking into…
▽ More
Our direct atomic simulations reveal that a thermally activated phonon mode involves a large population of elastic wavepackets. These excitations are characterized by a wide distribution of lifetimes and coherence times expressing particle- and wave-like natures. In agreement with direct simulations, our theoretical derivation yields a generalized law for the decay of the phonon number taking into account coherent effects. Before the conventional exponential decay due to phonon-phonon scattering, this law introduces a delay proportional to the square of the coherence time. This additional regime leads to a moderate increase in relaxation times and thermal conductivity. This work opens new horizons in the understanding of the origin and the treatment of thermal phonons.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
Thermal conductivity of graphene polymorphs and compounds: from C3N to graphdiyne lattices
Authors:
S. Milad Hatam-Lee,
Ali Rajabpour,
Sebastian Volz
Abstract:
Tremendous experimental and theoretical attempts to find carbon based two-dimensional semiconductors have yielded a wide variety of graphene polymorphs, such as carbon-nitride, carbonboride, graphyne and graphdiyne 2D materials with highly attractive physical and chemical properties. In this study, by conducting extensive non-equilibrium molecular dynamics simulations, we have calculated and compa…
▽ More
Tremendous experimental and theoretical attempts to find carbon based two-dimensional semiconductors have yielded a wide variety of graphene polymorphs, such as carbon-nitride, carbonboride, graphyne and graphdiyne 2D materials with highly attractive physical and chemical properties. In this study, by conducting extensive non-equilibrium molecular dynamics simulations, we have calculated and compared the thermal conductivity of thirteen prominent carbon-based structures at different lengths and two main chirality directions. Acquired results show that the structures of C3N, C3B and C2N exhibit the highest thermal conductivity, respectively, which suggest them as suitable candidates for thermal management systems in order to enhance the heat dissipation rates. In contrast, generally graphdiyne lattices and in particular 18-6-Gdy graphdiyne yields the lowest thermal conductivity, which can be a promising feature for thermoelectric applications. As a remarkable finding, we could establish connections between the thermal conductivity and density or Young's modulus of carbon based 2D systems, which can be employed to estimate the thermal conductivity of other polymorphs. Those results can provide a comprehensive viewpoint on the thermal transport properties of the nonporous and exceedingly porous carbon based 2D materials and may be used as useful guides for future designs in thermal management.
△ Less
Submitted 24 November, 2019; v1 submitted 7 October, 2019;
originally announced October 2019.
-
Surface phonon-polaritons enhance thermal conduction in SiN nanomembranes
Authors:
Yunhui Wu,
Jose Ordonez-Miranda,
Sergei Gluchko,
Roman Anufriev,
Sebastian Volz,
Masahiro Nomura
Abstract:
Surface phonon-polaritons can carry energy on the surface of dielectric films and thus are expected to contribute to heat conduction. However, the contribution of surface phonon-polaritons (SPhPs) to thermal transport has not been experimentally demonstrated yet. In this work, we experimentally measure the effective in-plane thermal conductivity of amorphous silicon nitride membrane and show that…
▽ More
Surface phonon-polaritons can carry energy on the surface of dielectric films and thus are expected to contribute to heat conduction. However, the contribution of surface phonon-polaritons (SPhPs) to thermal transport has not been experimentally demonstrated yet. In this work, we experimentally measure the effective in-plane thermal conductivity of amorphous silicon nitride membrane and show that it can indeed be increased by SPhPs significantly when the membrane thickness scales down. In particular, by heating up a thin membrane (<100 nm) from 300 to 800 K, the thermal conductivity increases twice due to SPhPs contribution.
△ Less
Submitted 3 August, 2019;
originally announced August 2019.
-
Quasi-ballistic heat conduction due to Lévy phonon flights in silicon nanowires
Authors:
Roman Anufriev,
Sergei Gluchko,
Sebastian Volz,
Masahiro Nomura
Abstract:
Future of silicon-based microelectronics relies on solving the heat dissipation problem. A solution may lie in a nanoscale phenomenon known as ballistic heat conduction, which implies heat conduction without heating the conductor. But, attempts to demonstrate this phenomenon experimentally are controversial and scarce whereas its mechanism in confined nanostructures is yet to be fully understood.…
▽ More
Future of silicon-based microelectronics relies on solving the heat dissipation problem. A solution may lie in a nanoscale phenomenon known as ballistic heat conduction, which implies heat conduction without heating the conductor. But, attempts to demonstrate this phenomenon experimentally are controversial and scarce whereas its mechanism in confined nanostructures is yet to be fully understood. Here, we experimentally demonstrate quasi-ballistic heat conduction in silicon nanowires (NWs). We show that the ballisticity is strongest in short NWs at low temperatures but weakens as the NW length or temperature is increased. Yet, even at room temperature, quasi-ballistic heat conduction remains visible in short NWs. To better understand this phenomenon, we probe directionality and lengths of phonon flights. Our experiments and simulations show that the quasi-ballistic phonon transport in NWs is the Lévy walk with short flights between the NW boundaries and long ballistic leaps along the NW.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Heat transfer in rough nanofilms and nanowires using Full Band Ab Initio Monte Carlo simulation
Authors:
B. Davier,
J. Larroque,
P. Dollfus,
L. Chaput,
S. Volz,
D. Lacroix,
J. Saint-Martin
Abstract:
The Boltzmann transport equation is one of the most relevant framework to study the heat transport at the nanoscale, beyond the diffusive regime and up to the micrometer-scale. In the general case of three-dimensional devices, the particle Monte Carlo approach of phonon transport is particularly powerful and convenient, and requires reasonable computational resources. In this work, we propose an o…
▽ More
The Boltzmann transport equation is one of the most relevant framework to study the heat transport at the nanoscale, beyond the diffusive regime and up to the micrometer-scale. In the general case of three-dimensional devices, the particle Monte Carlo approach of phonon transport is particularly powerful and convenient, and requires reasonable computational resources. In this work, we propose an original and versatile particle Monte Carlo approach parametrized by using ab-initio data. Both the phonon dispersion and the phonon-phonon scattering rates have been computed by DFT calculation in the entire 3D Brillouin zone. To treat the phonon transport at rough interfaces, a combination of specular and diffuse reflections has been implemented in phase space. Thermal transport has been investigated in nanowires and thin films made of cubic and hexagonal Silicon, including edge roughness, in terms of effective thermal conductivity, phonon band contributions and heat flux orientation. It is shown that the effective thermal conductivity in quasi-ballistic regime obtained from our Monte Carlo simulation cannot be accurately fitted by simple semi-analytical Matthiessen-like models and that spectral approaches are mandatory to get good results. Our Full Band approach shows that some phonon branches exhibiting a negative group velocity in some parts of the Brillouin zone may contribute negatively to the total thermal flux. Besides, the thermal flux clearly appears to be oriented along directions of high density of states. The resulting anisotropy of the heat flux is discussed together with the influence of rough interfaces.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
High thermoelectric performance of graphite nanofibers
Authors:
Van-Truong Tran,
Jérôme Saint-Martin,
Philippe Dollfus,
Sebastian Volz
Abstract:
Graphite nanofibers (GNFs) have been demonstrated to be a promising material for hydrogen storage and heat management in electronic devices. Here, by means of first-principles and transport simulations, we show that GNFs can also be an excellent material for thermoelectric applications thanks to the interlayer weak van der Waals interaction that induces low thermal conductance and a step-like shap…
▽ More
Graphite nanofibers (GNFs) have been demonstrated to be a promising material for hydrogen storage and heat management in electronic devices. Here, by means of first-principles and transport simulations, we show that GNFs can also be an excellent material for thermoelectric applications thanks to the interlayer weak van der Waals interaction that induces low thermal conductance and a step-like shape in the electronic transmission with mini-gaps, which are necessary ingredients to achieve high thermoelectric performance. This study unveils that the platelet form of GNFs in which graphite layers are perpendicular to the fiber axis can exhibit outstanding thermoelectric properties with a figure of merit ZT reaching 3.55 in a 0.5 nm diameter fiber and 1.1 for a 1.1 nm diameter one. Interestingly, by introducing 14C isotope doping, ZT can even be enhanced up to more than 5, and more than 8 if we include the effect of finite phonon mean-free path, which demonstrates the amazing thermoelectric potential of GNFs.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Third nearest neighbor parameterized tight biding model for graphene nano-ribbons
Authors:
Van-Truong Tran,
Jérôme Saint-Martin,
Philippe Dollfus,
Sebastian Volz
Abstract:
The ab initio band structure of 2D graphene sheet is well reproduced by the third nearest neighbor tight binding model proposed by Reich et al [Phys. Rev. B 66, 035412]. For ribbon structures, the existing sets of tight binding parameters can successfully explain semi-conducting behavior of all armchair ribbon structures. However, they are still failing in describing accurately the slope of the ba…
▽ More
The ab initio band structure of 2D graphene sheet is well reproduced by the third nearest neighbor tight binding model proposed by Reich et al [Phys. Rev. B 66, 035412]. For ribbon structures, the existing sets of tight binding parameters can successfully explain semi-conducting behavior of all armchair ribbon structures. However, they are still failing in describing accurately the slope of the bands while this feature is directly associated to the group velocity and the effective mass of electrons. In this work, both density functional theory and tight binding calculations were performed and a new set of tight binding parameters up to the third nearest neighbors including overlap terms is introduced. The results obtained with this model offer excellent agreement with the predictions of the density functional theory in most cases of ribbon structures, even in the high-energy region. Moreover, this set can induce electron-hole asymmetry as manifested in density functional theory. Relevant outcomes are also demonstrated for armchair ribbons of various widths as well as for zigzag structures, thus opening a route for multi-scale simulations.
△ Less
Submitted 8 February, 2017;
originally announced February 2017.
-
Optimizing isotope and vacancy engineering in graphene ribbons to enhance the thermoelectric performance without degrading the electronic properties
Authors:
Van-Truong Tran,
Jérôme Saint-Martin,
Philippe Dollfus,
Sebastian Volz
Abstract:
The enhancement of thermoelectric figure of merit ZT requires to either increase the power factor or reduce the phonon conductance, or even both. In graphene, the high phonon thermal conductivity is the main factor limiting the thermoelectric conversion. The common strategy to enhance ZT is therefore to introduce phonon scatterers to suppress the phonon conductance while retaining high electrical…
▽ More
The enhancement of thermoelectric figure of merit ZT requires to either increase the power factor or reduce the phonon conductance, or even both. In graphene, the high phonon thermal conductivity is the main factor limiting the thermoelectric conversion. The common strategy to enhance ZT is therefore to introduce phonon scatterers to suppress the phonon conductance while retaining high electrical conductance and Seebeck coefficient. Although thermoelectric performance is eventually enhanced, all studies based on this strategy show a significant reduction of the electrical conductance, most often leading to a lower electronic performance. In this study we show that appropriate sources of disorder, including isotopes and vacancies at lowest electron density positions, can be used as phonon scatterers to reduce the phonon conductance in graphene ribbons without degrading the electrical conductance, particularly in the low-energy region which is the most important range for device operation. By means of atomistic calculations using semi-empirical Tight-Binding and Force Constant models in combination with Non-Equilibrium Green function formalism, we show that the natural electronic properties of graphene ribbons can be fully preserved while their thermoelectric efficiency is strongly enhanced. For ribbons of width M = 5 dimer lines, room-temperature ZT is enhanced from less than 0.26 for defect-free ribbons to more than 2.5. This study is likely to set the milestones of a new generation of nano-devices with dual electronic, thermoelectric functionalities.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Vibrational mean free paths and thermal conductivity of amorphous silicon from non-equilibrium molecular dynamics simulations
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
A. J. H. McGaughey,
S. Volz
Abstract:
The frequency-dependent mean free paths (MFPs) of vibrational heat carriers in amorphous silicon are predicted from the length dependence of the spectrally decomposed heat current (SDHC) obtained from non-equilibrium molecular dynamics simulations. The results suggest a (frequency)$^{-2}$ scaling of the room-temperature MFPs below 5 THz. The MFPs exhibit a local maximum at a frequency of 8 THz and…
▽ More
The frequency-dependent mean free paths (MFPs) of vibrational heat carriers in amorphous silicon are predicted from the length dependence of the spectrally decomposed heat current (SDHC) obtained from non-equilibrium molecular dynamics simulations. The results suggest a (frequency)$^{-2}$ scaling of the room-temperature MFPs below 5 THz. The MFPs exhibit a local maximum at a frequency of 8 THz and fall below 1 nm at frequencies greater than 10 THz, indicating localized vibrations. The MFPs extracted from sub-10 nm system-size simulations are used to predict the length-dependence of thermal conductivity up to system sizes of 100 nm and good agreement is found with separate molecular dynamics simulations. Weighting the SDHC by the frequency-dependent quantum occupation function provides a simple and convenient method to account for quantum statistics and provides reasonable agreement with the experimentally-measured trend and magnitude.
△ Less
Submitted 28 May, 2016;
originally announced May 2016.
-
Spectral mapping of heat transfer mechanisms at liquid-solid interfaces
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
S. Volz
Abstract:
Thermal transport through liquid-solid interfaces plays an important role in many chemical and biological processes, and better understanding of liquid-solid energy transfer is expected to enable improving the efficiency of thermally driven applications. We determine the spectral distribution of thermal current at liquid-solid interfaces from nonequilibrium molecular dynamics, delivering a detaile…
▽ More
Thermal transport through liquid-solid interfaces plays an important role in many chemical and biological processes, and better understanding of liquid-solid energy transfer is expected to enable improving the efficiency of thermally driven applications. We determine the spectral distribution of thermal current at liquid-solid interfaces from nonequilibrium molecular dynamics, delivering a detailed picture of the contributions of different vibrational modes to liquid-solid energy transfer. Our results show that surface modes located at the Brillouin zone edge and polarized along the liquid-solid surface normal play a crucial role in liquid-solid energy transfer. Strong liquid-solid adhesion allows also for the coupling of in-plane polarized modes in the solid with the liquid, enhancing the heat transfer rate and enabling efficient energy transfer up to the cut-off frequency of the solid. Our results provide fundamental understanding of the energy transfer mechanisms in liquid-solid systems and enable detailed investigations of energy transfer between, e.g., water and organic molecules.
△ Less
Submitted 28 May, 2016; v1 submitted 18 December, 2015;
originally announced December 2015.
-
Nonequilibrium phonon mean free paths in anharmonic chains
Authors:
K. Sääskilahti,
J. Oksanen,
S. Volz,
J. Tulkki
Abstract:
Harnessing the power of low-dimensional materials in thermal applications calls for a solid understanding of the anomalous thermal properties of such systems. We analyze thermal conduction in one-dimensional systems by determining the frequency-dependent phonon mean free paths (MFPs) for an anharmonic chain, delivering insight into the diverging thermal conductivity observed in computer simulation…
▽ More
Harnessing the power of low-dimensional materials in thermal applications calls for a solid understanding of the anomalous thermal properties of such systems. We analyze thermal conduction in one-dimensional systems by determining the frequency-dependent phonon mean free paths (MFPs) for an anharmonic chain, delivering insight into the diverging thermal conductivity observed in computer simulations. In our approach, the MFPs are extracted from the length-dependence of the spectral heat current obtained from nonequilibrium molecular dynamics simulations. At low frequencies, the results reveal a power-law dependence of the MFPs on frequency, in agreement with the diverging conductivity and the recently determined equilibrium MFPs. At higher frequencies, however, the nonequilibrium MFPs consistently exceed the equilibrium MFPs, highlighting the differences between the two quantities. Exerting pressure on the chain is shown to suppress the mean free paths and to generate a weaker divergence of MFPs at low frequencies. The results deliver important insight into anomalous thermal conduction in low-dimensional systems and also reveal differences between the MFPs obtained from equilibrium and nonequilibrium simulations.
△ Less
Submitted 18 December, 2015; v1 submitted 1 October, 2015;
originally announced October 2015.
-
Heat conduction tuning using the wave nature of phonons
Authors:
Jeremie Maire,
Roman Anufriev,
Ryoto Yanagisawa,
Aymeric Ramiere,
Sebastian Volz,
Masahiro Nomura
Abstract:
The world communicates to our senses of vision, hearing and touch in the language of waves, as the light, sound, and even heat essentially consist of microscopic vibrations of different media. The wave nature of light and sound has been extensively investigated over the past century and is now widely used in modern technology. But the wave nature of heat has been the subject of mostly theoretical…
▽ More
The world communicates to our senses of vision, hearing and touch in the language of waves, as the light, sound, and even heat essentially consist of microscopic vibrations of different media. The wave nature of light and sound has been extensively investigated over the past century and is now widely used in modern technology. But the wave nature of heat has been the subject of mostly theoretical studies, as its experimental demonstration, let alone practical use, remains challenging due to the extremely short wavelengths of these waves. Here we show a possibility to use the wave nature of heat for thermal conductivity tuning via spatial short-range order in phononic crystal nanostructures. Our experimental and theoretical results suggest that interference of thermal phonons occurs in strictly periodic nanostructures and slows the propagation of heat. This finding broadens the methodology of heat transfer engineering by expanding its territory to the wave nature of heat.
△ Less
Submitted 9 September, 2016; v1 submitted 19 August, 2015;
originally announced August 2015.
-
Functionalization mediates heat transport in graphene nanoflakes
Authors:
Haoxue Han,
Yong Zhang,
Zainelabideen Y. Mijbil,
Hatef Sadeghi,
Yuxiang Ni,
Shiyun Xiong,
Kimmo Saaskilahti,
Steven Bailey,
Yuriy A. Kosevich,
Johan Liu,
Colin J. Lambert,
Sebastian Volz
Abstract:
Self-heating is a severe problem for high-power microelectronic devices. Graphene and few-layer graphene have attracted tremendous attention for heat removal thanks to their extraordinarily high in-plane thermal conductivity. However, this high thermal conductivity undergoes severe degradations caused by the contact with the substrate and the functionalization-induced point defects. Here we show t…
▽ More
Self-heating is a severe problem for high-power microelectronic devices. Graphene and few-layer graphene have attracted tremendous attention for heat removal thanks to their extraordinarily high in-plane thermal conductivity. However, this high thermal conductivity undergoes severe degradations caused by the contact with the substrate and the functionalization-induced point defects. Here we show that thermal management of a micro heater can be substantially improved via introduction of alternative heat-escaping channels implemented with graphene-based film covalently bonded to functionalized graphene oxide through silane molecules. Theoretical and experimental results demonstrate a counter-intuitive enhancement of the thermal conductivity of such a graphene-based film. This increase in the in-plane thermal conductivity of supported graphene is accompanied by an improvement on the graphene-substrates thermal contact. Using infrared thermal imaging, we demonstrate that the temperature of the hotspots can be lowered by 12 $^o$C in transistors operating at 130 W mm$^{-2}$ , which corresponds to half of an order-of-magnitude increase in the device lifetime. Ab initio and molecular dynamics simulations reveal that the functionalization constrains the cross-plane scattering of low frequency phonons, which in turn enhances in-plane heat conduction of the bonded graphene film by recovering the long flexural phonon lifetime.
△ Less
Submitted 7 August, 2015;
originally announced August 2015.
-
Steady State and Modulated Heat Conduction in Layered Systems Predicted by the Phonon Boltzmann Transport Equation
Authors:
Jose Ordonez-Miranda,
Ronggui Yang,
Sebastian Volz,
J. J. Alvarado-Gil
Abstract:
Based on the phonon Boltzmann transport equation under the relaxation time approximation, analytical expressions for the temperature profiles of both steady state and modulated heat conduction inside a thin film deposited on a substrate are derived and analyzed. It is shown that both steady state and modulated components of the temperature depend strongly on the ratio between the film thickness an…
▽ More
Based on the phonon Boltzmann transport equation under the relaxation time approximation, analytical expressions for the temperature profiles of both steady state and modulated heat conduction inside a thin film deposited on a substrate are derived and analyzed. It is shown that both steady state and modulated components of the temperature depend strongly on the ratio between the film thickness and the average phonon mean free path, and they exhibit the diffusive behavior as predicted by the Fourier law of heat conduction when this ratio is much larger than the unity. In contrast, in the ballistic regime when this ratio is comparable to or smaller than the unity, the steady-state temperature tends to be independent of position, while the amplitude and the phase of the modulated temperature appear to be lower than those determined by the Fourier law. Furthermore, we derived an invariant of heat conduction and a simple formula for the cross-plane thermal conductivity of dielectric thin films, which could be a useful guide for understanding and optimizing the thermal performance of the layered systems. This work represents the Boltzmann transport equation-based extension of the Rosencwaig and Gerko work [J. Appl. Phys. 47, 64 (1976)], which is based on the Fourier law and has widely been used as the theoretical framework for the development of photoacoustic and photothermal techniques. This work might shed some light on developing a theoretical basis for the determination of the phonon MFP and relaxation time using ultrafast laser-based transient heating techniques.
△ Less
Submitted 13 January, 2015;
originally announced January 2015.
-
Phonon nanocapacitor for storage and lasing of terahertz lattice waves
Authors:
Haoxue Han,
Baowen Li,
Sebastian Volz,
Yuriy A. Kosevich
Abstract:
We introduce a novel ultra-compact nanocapacitor of coherent phonons formed by high-finesse interference mirrors based on atomic-scale semiconductor metamaterials. Our molecular dynamics simulations show that the nanocapacitor stores THz monochromatic lattice waves, which can be used for phonon lasing - the emission of coherent phonons. Either one- or two-color phonon lasing can be realized depend…
▽ More
We introduce a novel ultra-compact nanocapacitor of coherent phonons formed by high-finesse interference mirrors based on atomic-scale semiconductor metamaterials. Our molecular dynamics simulations show that the nanocapacitor stores THz monochromatic lattice waves, which can be used for phonon lasing - the emission of coherent phonons. Either one- or two-color phonon lasing can be realized depending on the geometry of the nanodevice. The two color regimes of the capacitor originates from the distinct transmittance dependance on the phonon wave packet incident angle for the two phonon polarizations at their respective resonances. Phonon nanocapacitor can be charged by cooling the sample equilibrated at room temperature or by the pump-probe technique. The nanocapacitor can be discharged by applying tunable reversible strain, resulting in the emission of coherent THz acoustic beams.
△ Less
Submitted 20 November, 2014;
originally announced November 2014.
-
Frequency-dependent phonon mean free path in carbon nanotubes from non-equilibrium molecular dynamics
Authors:
K. Sääskilahti,
J. Oksanen,
S. Volz,
J. Tulkki
Abstract:
Owing to their long phonon mean free paths (MFPs) and high thermal conductivity, carbon nanotubes (CNTs) are ideal candidates for, e.g., removing heat from electronic devices. It is unknown, however, how the intrinsic phonon MFPs depend on vibrational frequency in non-equilibrium. We determine the spectrally resolved phonon MFPs in isotopically pure CNTs from the spectral phonon transmission funct…
▽ More
Owing to their long phonon mean free paths (MFPs) and high thermal conductivity, carbon nanotubes (CNTs) are ideal candidates for, e.g., removing heat from electronic devices. It is unknown, however, how the intrinsic phonon MFPs depend on vibrational frequency in non-equilibrium. We determine the spectrally resolved phonon MFPs in isotopically pure CNTs from the spectral phonon transmission function calculated using non-equilibrium molecular dynamics, fully accounting for the resistive phonon-phonon scattering processes through the anharmonic terms of the interatomic potential energy function. Our results show that the effective room temperature MFPs of low-frequency phonons ($f<0.5$ THz) exceed $10$ $μ$m, while the MFP of high-frequency phonons ($f\gtrsim 20$ THz) is in the range 10--100 nm. Because the determined MFPs directly reflect the resistance to energy flow, they can be used to accurately predict the thermal conductivity for arbitrary tube lengths by calculating a single frequency integral. The presented results and methods are expected to significantly improve the understanding of non-equilibrium thermal transport in low-dimensional nanostructures.
△ Less
Submitted 20 March, 2015; v1 submitted 11 November, 2014;
originally announced November 2014.
-
Role of anharmonic phonon scattering in the spectrally decomposed thermal conductance at planar interfaces
Authors:
K. Sääskilahti,
J. Oksanen,
J. Tulkki,
S. Volz
Abstract:
Detailed understanding of vibrational heat transfer mechanisms between solids is essential for the efficient thermal engineering and control of nanomaterials. We investigate the frequency dependence of anharmonic scattering and interfacial thermal conduction between two acoustically mismatched solids in planar contact by calculating the spectral decomposition of the heat current flowing through an…
▽ More
Detailed understanding of vibrational heat transfer mechanisms between solids is essential for the efficient thermal engineering and control of nanomaterials. We investigate the frequency dependence of anharmonic scattering and interfacial thermal conduction between two acoustically mismatched solids in planar contact by calculating the spectral decomposition of the heat current flowing through an interface between two materials. The calculations are based on analyzing the correlations of atomic vibrations using the data extracted from non-equilibrium molecular dynamics simulations. Inelastic effects arising from anharmonic interactions are shown to significantly facilitate heat transfer between two mass-mismatched face-centered cubic lattices even at frequencies exceeding the cut-off frequency of the heavier material due to (i) enhanced dissipation of evanescent vibrational modes and (ii) frequency-doubling and frequency-halving three-phonon energy transfer processes at the interface. The results provide substantial insight into interfacial energy transfer mechanisms especially at high temperatures, where inelastic effects become important and other computational methods are ineffective.
△ Less
Submitted 30 October, 2014; v1 submitted 15 May, 2014;
originally announced May 2014.
-
Phonon Interference and Thermal Conductance Reduction in Atomic-Scale Metamaterials
Authors:
Haoxue Han,
Lyudmila G. Potyomina,
Alexandre A. Darinskii,
Sebastian Volz,
Yuriy A. Kosevich
Abstract:
We introduce and model a three-dimensional (3D) atomic-scale phononic metamaterial producing two-path phonon interference antiresonances to control the heat flux spectrum. We show that a crystal plane partially embedded with defect-atom arrays can completely reflect phonons at the frequency prescribed by masses and interaction forces. We emphasize the predominant role of the second phonon path and…
▽ More
We introduce and model a three-dimensional (3D) atomic-scale phononic metamaterial producing two-path phonon interference antiresonances to control the heat flux spectrum. We show that a crystal plane partially embedded with defect-atom arrays can completely reflect phonons at the frequency prescribed by masses and interaction forces. We emphasize the predominant role of the second phonon path and destructive interference in the origin of the total phonon reflection and thermal conductance reduction in comparison with the Fano-resonance concept. The random defect distribution in the plane and the anharmonicity of atom bonds do not deteriorate the antiresonance. The width of the antiresonance dip can provide a measure of the coherence length of the phonon wave packet. All our conclusions are confirmed both by analytical studies of the equivalent quasi-1D lattice models and by numerical molecular dynamics simulations of realistic 3D lattices.
△ Less
Submitted 21 May, 2014; v1 submitted 18 February, 2014;
originally announced February 2014.
-
Quantized Thermal Conductance of Nanowires at Room Temperature due to Surface Phonon-Polaritons
Authors:
Jose Ordonez-Miranda,
Laurent Tranchant,
Beomjoon Kim,
Yann Chalopin,
Thomas Antoni,
Sebastian Volz
Abstract:
Based on the Landauer formalism, we demonstrate that the thermal conductance due to the propagation of surface phonon-polaritons along a polar nanowire is independent of the material characteristics and is given by Pi^2kB^2T/3h. The giant propagation length of these energy carriers establishes that this quantization holds not only for a temperature much smaller than 1 K, as is the case of electron…
▽ More
Based on the Landauer formalism, we demonstrate that the thermal conductance due to the propagation of surface phonon-polaritons along a polar nanowire is independent of the material characteristics and is given by Pi^2kB^2T/3h. The giant propagation length of these energy carriers establishes that this quantization holds not only for a temperature much smaller than 1 K, as is the case of electrons and phonons, but also for temperatures comparable to room temperature, which can significantly facilitate its observation and application in the thermal management of nanoscale electronics and photonics.
△ Less
Submitted 6 December, 2013;
originally announced December 2013.
-
Microscopic Description of Coherent Transport by Thermal Phonons
Authors:
Benoit Latour,
Sebastian Volz,
Yann Chalopin
Abstract:
We demonstrate the coherent transport of thermal energy in superlattices by introducing a microscopic definition of the phonon coherence length. We demonstrate how to distinguish a coherent transport regime from diffuse interface scattering and discuss how these can be specifically controlled by several physical parameters. Our approach provides a convenient framework for the interpretation of pre…
▽ More
We demonstrate the coherent transport of thermal energy in superlattices by introducing a microscopic definition of the phonon coherence length. We demonstrate how to distinguish a coherent transport regime from diffuse interface scattering and discuss how these can be specifically controlled by several physical parameters. Our approach provides a convenient framework for the interpretation of previous experiments and thermal conductivity calculations and paves the way for the design of a new class of thermal interface materials.
△ Less
Submitted 8 September, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Classical to quantum transition of near-field heat transfer between two nanoparticles
Authors:
Shiyun Xiong,
Kaike Yang,
Yuriy A. Kosevich,
Yann Chalopin,
Roberto D'Agosta,
Pietro Cortona,
Sebastian Volz
Abstract:
Heat transfer between two silica clusters is investigated by using the non-equilibrium Green's function method. In the gap range between 4 Å and three times the cluster size, the thermal conductance decreases as predicted by the surface charge-charge interaction. Above five times the cluster size, the volume dipole-dipole interaction predominates. Finally, when the distance becomes smaller than 4…
▽ More
Heat transfer between two silica clusters is investigated by using the non-equilibrium Green's function method. In the gap range between 4 Å and three times the cluster size, the thermal conductance decreases as predicted by the surface charge-charge interaction. Above five times the cluster size, the volume dipole-dipole interaction predominates. Finally, when the distance becomes smaller than 4 Å, a quantum interaction where the electrons of both clusters are shared takes place. This quantum interaction leads to the dramatic increase of the thermal coupling between neighbor clusters due to strong interactions. This study finally provides a description of the transition between radiation and heat conduction in gaps smaller than a few nanometers.
△ Less
Submitted 25 February, 2014; v1 submitted 8 August, 2013;
originally announced August 2013.
-
Phonon Heat Conduction in Corrugated Silicon Nanowires Below the Casimir Limit
Authors:
Christophe Blanc,
Ali Rajabpour,
Sebastian Volz,
Thierry Fournier,
Olivier Bourgeois
Abstract:
The thermal conductance of straight and corrugated monocrystalline silicon nanowires has been measured between 0.3 K and 5 K. The difference in the thermal transport between corrugated nanowires and straight ones demonstrates a strong reduction in the mean free path of the phonons. This averaged mean free path is remarkably smaller than the smaller diameter of the nanowire, evidencing a phonon the…
▽ More
The thermal conductance of straight and corrugated monocrystalline silicon nanowires has been measured between 0.3 K and 5 K. The difference in the thermal transport between corrugated nanowires and straight ones demonstrates a strong reduction in the mean free path of the phonons. This averaged mean free path is remarkably smaller than the smaller diameter of the nanowire, evidencing a phonon thermal transport reduced below the Casimir limit. Monte Carlo simulations highlight that this effect can be attributed to significant multiple scattering of ballistic phonons occuring on the corrugated surfaces. This result suggests an original approach to transforming a monocrystalline material into a phonon glass.
△ Less
Submitted 17 April, 2013; v1 submitted 18 February, 2013;
originally announced February 2013.
-
Interface heat transfer between crossing carbon nanotubes, and the thermal conductivity of nanotube pellets
Authors:
Y. Chalopin,
S. Volz,
N. Mingo
Abstract:
We theoretically compute the interface thermal resistance between crossing single walled carbon nanotubes of various chiralities, using an atomistic Green's function approach with semi-empirical potentials. The results are then used to model the thermal conductivity of three dimensional nanotube pellets in vacuum. For an average nanotube length of 1 $μ$m, the model yields an upper bound for the…
▽ More
We theoretically compute the interface thermal resistance between crossing single walled carbon nanotubes of various chiralities, using an atomistic Green's function approach with semi-empirical potentials. The results are then used to model the thermal conductivity of three dimensional nanotube pellets in vacuum. For an average nanotube length of 1 $μ$m, the model yields an upper bound for the thermal conductivity of densely compacted pellets, of the order of a few W/m-K. This is in striking contrast with the ultra-high thermal conductivity reported on individually suspended nanotubes. The results suggest that nanotube pellets might have an application as thermal insulators.
△ Less
Submitted 16 September, 2008;
originally announced September 2008.
-
Non-Fourier heat transport in metal-dielectric core-shell nanoparticles under ultrafast laser pulse excitation
Authors:
Majid Rashidi-Huyeh,
Sebastian Volz,
Bruno Palpant
Abstract:
Relaxation dynamics of embedded metal nanoparticles after ultrafast laser pulse excitation is driven by thermal phenomena of different origins the accurate description of which is crucial for interpreting experimental results: hot electron gas generation, electron-phonon coupling, heat transfer to the particle environment and heat propagation in the latter. Regardingthis last mechanism, it is we…
▽ More
Relaxation dynamics of embedded metal nanoparticles after ultrafast laser pulse excitation is driven by thermal phenomena of different origins the accurate description of which is crucial for interpreting experimental results: hot electron gas generation, electron-phonon coupling, heat transfer to the particle environment and heat propagation in the latter. Regardingthis last mechanism, it is well known that heat transport in nanoscale structures and/or at ultrashort timescales may deviate from the predictions of the Fourier law. In these cases heat transport may rather be described by the Boltzmann transport equation. We present a numerical model allowing us to determine the electron and lattice temperature dynamics in a spherical gold nanoparticle core under subpicosecond pulsed excitation, as well as that of the surrounding shell dielectric medium. For this, we have used the electron-phonon coupling equation in the particle with a source term linked with the laser pulse absorption, and the ballistic-diffusive equations for heat conduction in the host medium. Either thermalizing or adiabatic boundary conditions have been considered at the shell external surface. Our results show that the heat transfer rate from the particle to the matrix can be significantly smaller than the prediction of Fourier's law. Consequently, the particle temperature rise is larger and its cooling dynamics might be slower than that obtained by using Fourier's law. This difference is attributed to the nonlocal and nonequilibrium heat conduction in the vicinity of the core nanoparticle. These results are expected to be of great importance for analyzing pump-probe experiments performed on single nanoparticles or nanocomposite media.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Near-Field Heat Transfer Percolation in Nanoparticles based Composite Media
Authors:
Sebastian Volz,
Gilberto Domingues
Abstract:
Near-field radiative heat transfer is investigated in composite media including nanoparticles. By modeling pair interactions only, the effective thermal conductivity due to near field radiation is calculated based on a thermal nodes model. We highlight the onset of a Near-Field percolation occurring much earlier than the mechanical percolation at critical volume fraction f=0.033. This 15 mechani…
▽ More
Near-field radiative heat transfer is investigated in composite media including nanoparticles. By modeling pair interactions only, the effective thermal conductivity due to near field radiation is calculated based on a thermal nodes model. We highlight the onset of a Near-Field percolation occurring much earlier than the mechanical percolation at critical volume fraction f=0.033. This 15 mechanism drastically increases the thermal conductivity even at low volume fractions. It also indicates a simple experimental protocol to prove Near-Field contact.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Cooling Dynamics of a Gold Nanoparticle in a Host Medium Under Ultrafast Laser Pulse Excitation: A Ballistic-Diffusive Approach
Authors:
Majid Rashidi-Huyeh,
Sebastian Volz,
Bruno Palpant
Abstract:
We present a numerical model allowing to determine the electron and lattice temperature dynamics in a gold nanoparticle under subpicosecond pulsed excitation, as well as that of the surrounding medium. For this, we have used the electron-phonon coupling equation in the particle with a source term linked with the laser pulse, and the ballistic-diffusive equations for heat conduction in the host m…
▽ More
We present a numerical model allowing to determine the electron and lattice temperature dynamics in a gold nanoparticle under subpicosecond pulsed excitation, as well as that of the surrounding medium. For this, we have used the electron-phonon coupling equation in the particle with a source term linked with the laser pulse, and the ballistic-diffusive equations for heat conduction in the host medium. Our results show that the heat transfer rate from the particle to the matrix is significantly smaller than the prediction of Fourier's law. Consequently, the particle temperature rise is much larger and its cooling dynamics is much slower than that obtained using Fourier's law, which is attributed to the nonlocal and nonequilibrium heat conduction in the vicinity of the nanoparticle. These results are expected to be of great importance for interpreting pump-probe experiments performed on single nanoparticles or nanocomposite media.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Thermal contact resistance between two nanoparticles
Authors:
Gilberto Domingues,
D. Rochais,
Sebastian Volz
Abstract:
We compute the thermal conductance between two nanoparticles in contact based on the Molecular Dynamics technique. The contact is generated by letting both particles stick together under van der Waals attractions. The thermal conductance is derived from the fluctuation-dissipation theorem and the time fluctuations of the exchanged power. We show that the conductance is proportional to the atoms…
▽ More
We compute the thermal conductance between two nanoparticles in contact based on the Molecular Dynamics technique. The contact is generated by letting both particles stick together under van der Waals attractions. The thermal conductance is derived from the fluctuation-dissipation theorem and the time fluctuations of the exchanged power. We show that the conductance is proportional to the atoms involved in the thermal interaction. In the case of silica, the atomic contribution to the thermal conductance is in the range of 0.5 to 3 nW.K-1. This result fits to theoretical predictions based on characteristic times of the temperature fluctuation. The order of magnitude of the contact conductance is 1 μW.K-1 when the cross section ranges from 1 to 10nm2.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
-
Nanoscale heat transfer at contact between a hot tip and a substrate
Authors:
Stéphane Lefèvre,
Sebastian Volz,
Pierre-Olivier Chapuis
Abstract:
Hot tips are used either for characterizing nanostructures by using scanning thermal microscopes or for local heating to assist data writing. The tip-sample thermal interaction involves conduction at solid-solid contact as well as conduction through the ambient gas and through the water meniscus. We analyze those three heat transfer modes with experimental data and modeling. We conclude that the…
▽ More
Hot tips are used either for characterizing nanostructures by using scanning thermal microscopes or for local heating to assist data writing. The tip-sample thermal interaction involves conduction at solid-solid contact as well as conduction through the ambient gas and through the water meniscus. We analyze those three heat transfer modes with experimental data and modeling. We conclude that the three modes contribute in a similar manner to the thermal contact conductance but they have distinct contact radii ranging from 30 nm to 1 micron. We also show that any scanning thermal microscope has a 1-3 microns resolution when used in ambient air.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Heat transfer between a nano-tip and a surface
Authors:
Pierre-Olivier Chapuis,
Jean-Jacques Greffet,
Karl Joulain,
Sebastian Volz
Abstract:
We study quasi-ballistic heat transfer through air between a hot nanometer-scale tip and a sample. The hot tip/surface configuration is widely used to perform nonintrusive confined heating. Using a Monte-Carlo simulation, we find that the thermal conductance reaches 0.8 MW.m-2K-1 on the surface under the tip and show the shape of the heat flux density distribution (nanometer-scale thermal spot).…
▽ More
We study quasi-ballistic heat transfer through air between a hot nanometer-scale tip and a sample. The hot tip/surface configuration is widely used to perform nonintrusive confined heating. Using a Monte-Carlo simulation, we find that the thermal conductance reaches 0.8 MW.m-2K-1 on the surface under the tip and show the shape of the heat flux density distribution (nanometer-scale thermal spot). These results show that a surface can be efficiently heated locally without contact. The temporal resolution of the heat transfer is a few tens of picoseconds.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Near-field induction heating of metallic nanoparticles due to infrared magnetic dipole contribution
Authors:
Pierre-Olivier Chapuis,
Marine Laroche,
Sebastian Volz,
Jean-Jacques Greffet
Abstract:
We revisit the electromagnetic heat transfer between a metallic nanoparticle and a metallic semi-infinite substrate, commonly studied using the electric dipole approximation. For infrared and microwave frequencies, we find that the magnetic polarizability of the particle is larger than the electric one. We also find that the local density of states in the near field is dominated by the magnetic…
▽ More
We revisit the electromagnetic heat transfer between a metallic nanoparticle and a metallic semi-infinite substrate, commonly studied using the electric dipole approximation. For infrared and microwave frequencies, we find that the magnetic polarizability of the particle is larger than the electric one. We also find that the local density of states in the near field is dominated by the magnetic contribution. As a consequence, the power absorbed by the particle in the near field is due to dissipation by fluctuating eddy currents. These results show that a number of near-field effects involving metallic particles should be affected by the fluctuating magnetic fields.
△ Less
Submitted 13 February, 2008;
originally announced February 2008.
-
Effects of spatial dispersion in near-field radiative heat transfer between two parallel metallic surfaces
Authors:
Pierre-Olivier Chapuis,
Sebastian Volz,
Carsten Henkel,
Karl Joulain,
Jean-Jacques Greffet
Abstract:
We study the heat transfer between two parallel metallic semi-infinite media with a gap in the nanometer-scale range. We show that the near-field radiative heat flux saturates at distances smaller than the metal skin depth when using a local dielectric constant and investigate the origin of this effect. The effect of non-local corrections is analysed using the Lindhard-Mermin and Boltzmann-Mermi…
▽ More
We study the heat transfer between two parallel metallic semi-infinite media with a gap in the nanometer-scale range. We show that the near-field radiative heat flux saturates at distances smaller than the metal skin depth when using a local dielectric constant and investigate the origin of this effect. The effect of non-local corrections is analysed using the Lindhard-Mermin and Boltzmann-Mermin models. We find that local and non-local models yield the same heat fluxes for gaps larger than 2 nm. Finally, we explain the saturation observed in a recent experiment as a manifestation of the skin depth and show that heat is mainly dissipated by eddy currents in metallic bodies.
△ Less
Submitted 13 February, 2008;
originally announced February 2008.
-
Increase of Thermal Resistance Between a Nanostructure and a Surface due to Phonon Multireflections
Authors:
S. Volz,
P. -O. Chapuis
Abstract:
The thermal resistance between a nanostructure and a half-body is calculated in the framework of particle-phonons physics. The current models approximate the nanostructure as a thermal bath. We prove that the multireflections of heat carriers in the nanostructure significantly increase resistance in contradiction with former predictions. This increase depends on the shape of the nanostructure an…
▽ More
The thermal resistance between a nanostructure and a half-body is calculated in the framework of particle-phonons physics. The current models approximate the nanostructure as a thermal bath. We prove that the multireflections of heat carriers in the nanostructure significantly increase resistance in contradiction with former predictions. This increase depends on the shape of the nanostructure and the heat carriers mean free path only. We provide a general and simple expression for the contact resistance and examine the specific cases of nanowires and nanoparticles.
△ Less
Submitted 29 November, 2007;
originally announced November 2007.
-
Polymer nanoparticles to decrease thermal conductivity of phase change materials
Authors:
Po Chapuis,
Sourabh Kumar Saha,
S. Volz
Abstract:
Microparticles including paraffin are currently used for textiles coating in order to deaden thermal shocks. We will show that polymer nanoparticles embedded in those microsized capsules allow for decreasing the thermal conductivity of the coating and enhance the protection in the stationary regime. A reasonable volume fraction of polymer nanoparticles reduces the conductivity more than predicte…
▽ More
Microparticles including paraffin are currently used for textiles coating in order to deaden thermal shocks. We will show that polymer nanoparticles embedded in those microsized capsules allow for decreasing the thermal conductivity of the coating and enhance the protection in the stationary regime. A reasonable volume fraction of polymer nanoparticles reduces the conductivity more than predicted by Maxwell mixing rules. Besides, measurements prove that the polymer nanoparticles do not affect the latent heat and even improve the phase change behaviour as well as the mechanical properties.
△ Less
Submitted 29 November, 2007;
originally announced November 2007.
-
Thermodiffusion in model nanofluids by molecular dynamics simulations
Authors:
Guillaume Galliéro,
S. Volz
Abstract:
In this work, a new algorithm is proposed to compute single particle (infinite dilution) thermodiffusion using Non-Equilibrium Molecular Dynamics simulations through the estimation of the thermophoretic force that applies on a solute particle. This scheme is shown to provide consistent results for simple Lennard-Jones fluids and for model nanofluids (spherical non-metallic nanoparticles + Lennar…
▽ More
In this work, a new algorithm is proposed to compute single particle (infinite dilution) thermodiffusion using Non-Equilibrium Molecular Dynamics simulations through the estimation of the thermophoretic force that applies on a solute particle. This scheme is shown to provide consistent results for simple Lennard-Jones fluids and for model nanofluids (spherical non-metallic nanoparticles + Lennard-Jones fluid) where it appears that thermodiffusion amplitude, as well as thermal conductivity, decrease with nanoparticles concentration. Then, in nanofluids in the liquid state, by changing the nature of the nanoparticle (size, mass and internal stiffness) and of the solvent (quality and viscosity) various trends are exhibited. In all cases the single particle thermodiffusion is positive, i.e. the nanoparticle tends to migrate toward the cold area. The single particle thermal diffusion 2 coefficient is shown to be independent of the size of the nanoparticle (diameter of 0.8 to 4 nm), whereas it increases with the quality of the solvent and is inversely proportional to the viscosity of the fluid. In addition, this coefficient is shown to be independent of the mass of the nanoparticle and to increase with the stiffness of the nanoparticle internal bonds. Besides, for these configurations, the mass diffusion coefficient behavior appears to be consistent with a Stokes-Einstein like law.
△ Less
Submitted 28 November, 2007;
originally announced November 2007.