-
Comparison of the Resistivities of Nanostructured Films Made from Silver, Copper-Silver and Copper Nanoparticle and Nanowire Suspensions
Authors:
Boris Polyakov,
Aleksandrs Novikovs,
Madara Leimane,
Kevon Kadiwala,
Martins Zubkins,
Edgars Butanovs,
Sven Oras,
Elyad Damerchi,
Veronika Zadin,
Sergei Vlassov
Abstract:
Spray deposition and inkjet printing of various nanostructures are emerging complementary methods for creating conductive coatings on different substrates. In comparison to established deposition techniques like vacuum metal coating and lithography-based metallization processes, spray deposition and inkjet printing benefit from significantly simplified equipment. However, there are number of chall…
▽ More
Spray deposition and inkjet printing of various nanostructures are emerging complementary methods for creating conductive coatings on different substrates. In comparison to established deposition techniques like vacuum metal coating and lithography-based metallization processes, spray deposition and inkjet printing benefit from significantly simplified equipment. However, there are number of challenges related to peculiar properties and behaviour of nanostructures that require additional studies. In present work, we investigate electroconductive properties and sintering behaviour of thin films produced from nanostructures of different metals (Ag, Cu and Cu-Ag) and different shapes (nanowires and spherical nanoparticles), and compare them to the reference Ag and Cu magnetron deposited films. Synthesized nanostructures were studied with transmission electron microscopy. Morphology and crystallinity of produced metal films were studied with scanning electron microscopy and X-ray diffraction. The electrical parameters were measured by the van der Pauw method. All nanowires-based films provided high conductivity and required only modest thermal treatment (200 C). To achieve sufficient sintering and conductivity of nanoparticles-based films, higher temperatures are required (300 C for Ag nanoparticles and 350 C for Cu and Cu-Ag nanoparticles). Additionally, stability of nanowires was studied by annealing the samples in vacuum conditions inside a scanning electron microscope at 500 C.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
Nano1D: An accurate Computer Vision software for analysis and segmentation of low-dimensional nanostructures
Authors:
Ehsan Moradpur-Tari,
Sergei Vlassov,
Sven Oras,
Mart Ernits,
Elyad Damerchi,
Boris Polyakovc,
Andreas Kyritsakis,
Veronika Zadin
Abstract:
Nanoparticles in microscopy images are usually analyzed qualitatively or manually and there is a need for autonomous quantitative analysis of these objects. In this paper, we present a physics-based computational model for accurate segmentation and geometrical analysis of one-dimensional deformable overlapping objects from microscopy images. This model, named Nano1D, has four steps of preprocessin…
▽ More
Nanoparticles in microscopy images are usually analyzed qualitatively or manually and there is a need for autonomous quantitative analysis of these objects. In this paper, we present a physics-based computational model for accurate segmentation and geometrical analysis of one-dimensional deformable overlapping objects from microscopy images. This model, named Nano1D, has four steps of preprocessing, segmentation, separating overlapped objects and geometrical measurements. The model is tested on SEM images of Ag and Au nanowire taken from different microscopes, and thermally fragmented Ag nanowires transformed into nanoparticles with different lengths, diameters, and population densities. It successfully segments and analyzes their geometrical characteristics including lengths and average diameter. The function of the algorithm is not undermined by the size, number, density, orientation and overlapping of objects in images. The main strength of the model is shown to be its ability to segment and analyze overlapping objects successfully with more than 99% accuracy, while current machine learning and computational models suffer from inaccuracy and inability to segment overlapping objects. Benefiting from a graphical user interface, Nano1D can analyze 1D nanoparticles including nanowires, nanotubes, nanorods in addition to other 1D features of microstructures like microcracks, dislocations etc.
△ Less
Submitted 10 December, 2023; v1 submitted 27 June, 2023;
originally announced June 2023.
-
The role of Al2O3 interlayer in the synthesis of ZnS/Al2O3/MoS2 core-shell nanowires
Authors:
Edgars Butanovs,
Alexei Kuzmin,
Aleksejs Zolotarjovs,
Sergei Vlassov,
Boris Polyakov
Abstract:
During the synthesis of heterostructured nanomaterials, unwanted structural and morphological changes in nanostructures may occur, especially when multiple sequential growth steps are involved. In this study, we describe a synthesis strategy of heterostructured ZnS/Al2O3/MoS2 core-shell nanowires (NWs), and explore the role of the Al2O3 interlayer during synthesis. Core-shell NWs were produced via…
▽ More
During the synthesis of heterostructured nanomaterials, unwanted structural and morphological changes in nanostructures may occur, especially when multiple sequential growth steps are involved. In this study, we describe a synthesis strategy of heterostructured ZnS/Al2O3/MoS2 core-shell nanowires (NWs), and explore the role of the Al2O3 interlayer during synthesis. Core-shell NWs were produced via a four-step route: 1) synthesis of ZnO NWs on a silicon wafer, 2) deposition of thin Al2O3 layer by ALD, 3) magnetron deposition of MoO3 layer, and 4) annealing of the sample in the sulphur atmosphere. During sulphurization, ZnO is converted into ZnS, and MoO3 into MoS2, while the Al2O3 interlayer preserves the smooth surface of an NW required for the growth of a continuous MoS2 shell. The resulting ZnS/Al2O3/MoS2 core-shell NWs were characterized by transmission electron microscopy, X-ray diffraction and photoelectron spectroscopy, Raman spectroscopy, and optical photoluminescence spectroscopy. A reported strategy can be used for the synthesis of other core-shell NWs with a transition metal dichalcogenides (TMDs) shell to protect the NW core material that may otherwise be altered or damaged by the reactive chalcogenides at high temperatures.
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
-
Au nanowire junction breakup through surface atom diffusion
Authors:
Simon Vigonski,
Ville Jansson,
Sergei Vlassov,
Boris Polyakov,
Ekaterina Baibuz,
Sven Oras,
Alvo Aabloo,
Flyura Djurabekova,
Vahur Zadin
Abstract:
Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper…
▽ More
Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200, 400, 600 and 700 °C) during a time period of 10 minutes. We show that nanowires are especially prone to fragmentation around junctions and crossing points even at comparatively low temperatures. The fragmentation process is highly temperature dependent and the junction region breaks up at a lower temperature than a single nanowire. We develop a gold parametrization for Kinetic Monte Carlo simulations and demonstrate the surface diffusion origin of the nanowire junction fragmentation. We show that nanowire fragmentation starts at the junctions with high reliability and propose that aligning nanowires in a regular grid could be used as a technique for fabricating arrays of nanodots.
△ Less
Submitted 15 March, 2018; v1 submitted 26 September, 2017;
originally announced September 2017.
