-
Effect of varying preheating temperatures in electron beam powder bed fusion: Part I Assessment of the effective powder cake thermal conductivity
Authors:
Gitanjali Shanbhag,
Mihaela Vlasea
Abstract:
One of the major barriers in adapting the existing EB-PBF process parameters to a new powder material system is controlling the preheating conditions such that every layer of powder results in enough partial sintering to create a coherent powder cake. To be able to understand the powder sintering process and adapt it to other materials, we must look at the degree of sintering and the effective the…
▽ More
One of the major barriers in adapting the existing EB-PBF process parameters to a new powder material system is controlling the preheating conditions such that every layer of powder results in enough partial sintering to create a coherent powder cake. To be able to understand the powder sintering process and adapt it to other materials, we must look at the degree of sintering and the effective thermal conductivity of the powder bed. An in-depth understanding of these characteristics will help tailor the preheating conditions and furthermore, make it easier to remove/de-powder intricate parts after build completion without compromising the advantages of the preheating phenomenon. This study evaluates the impact of preheating temperature on the in-situ powder cake properties. Three different preheat temperatures, 650 °C, 690 °C and 730 °C, are employed to a Ti-6Al-4V powder cake and in each standalone build, unique powder-capture artefacts are fabricated to be able to analyze the in-situ powder cake properties using X-ray computed tomography. An empirically-derived model for thermal conductivity of the powder cake as a result of changing the preheating temperatures, was obtained. The results demonstrated that the effective thermal conductivity of the powder cake at a given preheating temperature strongly depends on the packing density, contact size ratio and coordination number. An increase in preheating temperature, lead to a linear increase in the packing density (from 58.42% to 61.87%), contact size ratio (from 0.45 to 0.48), coordination number (from 3.36 to 3.58) and the effective thermal conductivity (from 1.75 W/m/K to 2.11 W/m/K) of the powder cake.
△ Less
Submitted 30 July, 2021;
originally announced July 2021.
-
Powder reuse cycles in electron beam powder bed fusion : Variation of powder characteristics
Authors:
Gitanjali Shanbhag,
Mihaela Vlasea
Abstract:
A path to lowering the economic barrier associated with the high cost of metal additively manufactured components is to reduce the waste via powder reuse (powder cycled back into the process) and recycling (powder chemically, physically, or thermally processed to recover the original properties) strategies. In electron beam powder bed fusion, there is a possibility of reusing 95 - 98% of the powde…
▽ More
A path to lowering the economic barrier associated with the high cost of metal additively manufactured components is to reduce the waste via powder reuse (powder cycled back into the process) and recycling (powder chemically, physically, or thermally processed to recover the original properties) strategies. In electron beam powder bed fusion, there is a possibility of reusing 95 - 98% of the powder that is not melted. However, there is a lack of systematic studies focusing on quantifying the variation of powder properties induced by number of reuse cycles. This work compares the influence of multiple reuse cycles, as well as powder blends created from reused powder, on various powder characteristics such as the morphology, size distribution, flow properties, packing properties and chemical composition (oxygen and nitrogen content). It was found that there is an increase in measured response in powder size distribution, tapped density, Hausner ratio, Carr index, basic flow energy and specific energy, dynamic angle of repose, oxygen, and nitrogen content, while the bulk density remained largely unchanged.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Architectural bone parameters and the relationship to titanium lattice design for powder bed fusion additive manufacturing
Authors:
Martine McGregor,
Sagar Patel,
Stewart McLachlin,
Mihaela Vlasea
Abstract:
Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical…
▽ More
Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical bone are not well understood. A comprehensive review was completed to compare the natural lattice architecture properties in human bone to Ti and Ti-6Al-4V lattice structures for bone replacement and repair. Ti and Ti-6Al-4V lattice porosity has varied from 15% to 97% with most studies reporting a porosity between 50-70%. Cortical bone is roughly 5-15% porous and lattices with 50-70% porosity are able to achieve comparable stiffness, compressive strength, and yield strength. Trabecular bone has a reported porosity range from 70-90%, with trabecular thickness varying from 120-200 μm. Existing powder bed fusion technologies have produced strut and wall thicknesses ranging from 200-1669 μm. This suggests limited overlap between current AM of Ti and Ti-6Al-4V lattice structures and trabecular bone architecture, indicating that replicating natural trabecular bone parameters with latticing is prohibitively challenging. This review contributes to the body of knowledge by identifying the correspondence of Ti and Ti-6Al-4V lattices to the natural parameters of bone microarchitectures, and provides further guidance on the design and AM recommendations towards addressing recognized performance gaps with powder bed fusion technologies.
△ Less
Submitted 2 July, 2021; v1 submitted 17 May, 2021;
originally announced May 2021.
-
The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy -- AlSi$_{10}$Mg
Authors:
Sagar Patel,
Haoxiu Chen,
Mihaela Vlasea,
Yu Zou
Abstract:
LPBF of Al alloys is associated with numerous challenges when compared to other commonly used alloys due to their higher reflectivity and thermal conductivity. In this work, processing diagrams, temperature prediction models, XCT, and metallography are used for establishing criteria in process parameter optimization of high reflectivity Al alloys based on AlSi$_{10}$Mg response in using 57 differe…
▽ More
LPBF of Al alloys is associated with numerous challenges when compared to other commonly used alloys due to their higher reflectivity and thermal conductivity. In this work, processing diagrams, temperature prediction models, XCT, and metallography are used for establishing criteria in process parameter optimization of high reflectivity Al alloys based on AlSi$_{10}$Mg response in using 57 different process parameter combinations - 21 using a focused Gaussian laser beam and 36 using divergent beams. For LPBF systems with focused beam diameters <100 μm, divergent beams obtained by defocusing to a position above the LPBF build plate primarily lead to conduction mode melt pools, while a focused beam leads to transition and keyhole mode melt pools. Conduction mode melting helps in avoiding keyhole mode defects, resulting in parts with densities >99.98%. Additionally, an analytical model-guided selection of laser power and velocity settings for a focused beam help in stabilizing melt pool and spatter dynamics in the transition melting mode thereby enabling a potential to obtain density values close to conduction mode densities (~99.98%). A dimensionless keyhole number (Ke) was derived in this work to identify distinct regions of conduction (Ke of 0-12), transition (Ke of 12-20), and keyhole (Ke > 20) mode melting during LPBF of AlSi$_{10}$. A melt pool aspect ratio (ratio of melt pool depth to width) of ~0.4 is observed to be the threshold between conduction and transition/keyhole mode melt pools for AlSi$_{10}$, different from the conventionally assumed 0.5. Lastly, inferred laser absorptivity values (from experimental melt pools) of transition/keyhole mode melt pools are observed to be >40% higher when compared to conduction mode melt pools. This work demonstrates a dimensionless-process map method to obtain near fully dense parts that can be generalized for LPBF of high reflectivity alloys.
△ Less
Submitted 24 August, 2022; v1 submitted 17 May, 2021;
originally announced May 2021.
