-
Stable and unstable capillary fingering in porous media with a gradient in grains size
Authors:
Tom Vincent-Dospital,
Marcel Moura,
Renaud Toussaint,
Knut Jørgen Måløy
Abstract:
We present a theoretical and experimental investigation of slow drainage in porous media with a gradient in the grains size (and hence in the typical pores' throats), in an external gravitational field. We mathematically show that such structural gradient and external force have a similar effect on the obtained drainage patterns, when they stabilise the invasion front. With the help of a newly int…
▽ More
We present a theoretical and experimental investigation of slow drainage in porous media with a gradient in the grains size (and hence in the typical pores' throats), in an external gravitational field. We mathematically show that such structural gradient and external force have a similar effect on the obtained drainage patterns, when they stabilise the invasion front. With the help of a newly introduced experimental set-up, based on the 3D-print of transparent porous matrices, we illustrate this equivalence, and extend it to the case where the front is unstable. We also present some invasion-percolation simulations of the same phenomena, which are inline with our theoretical and experimental results. In particular, we show that the width of stable drainage fronts mainly scales with the spatial gradient of the average pore invasion threshold and with the local distribution of this (disordered) threshold. The scaling exponent results from percolation theory and is -0.57 for 2D systems. Overall, we propose a unifying theory for the up-scaling of dual fluid flows in most classical scenarii.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Thermally activated intermittent dynamics of creeping crack fronts along disordered interfaces
Authors:
Tom Vincent-Dospital,
Alain Cochard,
Stéphane Santucci,
Knut Jørgen Måløy,
Renaud Toussaint
Abstract:
We present a subcritical fracture growth model, coupled with the elastic redistribution of the acting mechanical stress along rugous rupture fronts. We show the ability of this model to quantitatively reproduce the intermittent dynamics of cracks propagating along weak disordered interfaces. To this end, we assume that the fracture energy of such interfaces (in the sense of a critical energy relea…
▽ More
We present a subcritical fracture growth model, coupled with the elastic redistribution of the acting mechanical stress along rugous rupture fronts. We show the ability of this model to quantitatively reproduce the intermittent dynamics of cracks propagating along weak disordered interfaces. To this end, we assume that the fracture energy of such interfaces (in the sense of a critical energy release rate) follows a spatially correlated normal distribution. We compare various statistical features from the hence obtained fracture dynamics to that from cracks propagating in sintered polymethylmethacrylate (PMMA) interfaces. In previous works, it has been demonstrated that such approach could reproduce the mean advance of fractures and their local front velocity distribution. Here, we go further by showing that the proposed model also quantitatively accounts for the complex self-affine scaling morphology of crack fronts and their temporal evolution, for the spatial and temporal correlations of the local velocity fields and for the avalanches size distribution of the intermittent growth dynamics. We thus provide new evidence that Arrhenius-like subcritical growth laws are particularly suitable for the description of creeping cracks.
△ Less
Submitted 11 October, 2021; v1 submitted 14 October, 2020;
originally announced October 2020.
-
Thermal dissipation as both the strength and weakness of matter. A material failure prediction by monitoring creep
Authors:
Tom Vincent-Dospital,
Renaud Toussaint,
Alain Cochard,
Eirik G. Flekkøy,
Knut Jørgen Måløy
Abstract:
In any domain involving some stressed solids, that is, from seismology to general engineering, the strength of matter is a paramount feature to understand. We here discuss the ability of a simple thermally activated sub-critical model, that includes the auto-induced thermal evolution of cracks tips, to predict the catastrophic failure of a vast range of materials. It is in particular shown that th…
▽ More
In any domain involving some stressed solids, that is, from seismology to general engineering, the strength of matter is a paramount feature to understand. We here discuss the ability of a simple thermally activated sub-critical model, that includes the auto-induced thermal evolution of cracks tips, to predict the catastrophic failure of a vast range of materials. It is in particular shown that the intrinsic surface energy barrier, for breaking the atomic bonds of many solids, can be easily deduced from the slow creeping dynamics of a crack. This intrinsic barrier is however higher than the macroscopic load threshold at which brittle matter brutally fails, possibly as a result of thermal activation and of a thermal weakening mechanism. We propose a novel method to compute the macroscopic critical energy release rate of rupture, G_a, solely from monitoring slow creep, and show that this reproduces the experimental values within 50% accuracy over twenty different materials, and over more than four decades of fracture energy.
△ Less
Submitted 1 March, 2021; v1 submitted 9 July, 2020;
originally announced July 2020.
-
How heat controls fracture: the thermodynamics of creeping and avalanching cracks
Authors:
Tom Vincent-Dospital,
Renaud Toussaint,
Stéphane Santucci,
Loïc Vanel,
Daniel Bonamy,
Lamine Hattali,
Alain Cochard,
Eirik Flekkøy,
Knut Jørgen Måløy
Abstract:
While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material failure if the size of a fast avalanche reaches that of the system. We here show that a simple thermodynamics approach can actually account for such complex cr…
▽ More
While of paramount importance in material science, the dynamics of cracks still lacks a complete physical explanation. The transition from their slow creep behavior to a fast propagation regime is a notable key, as it leads to full material failure if the size of a fast avalanche reaches that of the system. We here show that a simple thermodynamics approach can actually account for such complex crack dynamics, and in particular for the non-monotonic force-velocity curves commonly observed in mechanical tests on various materials. We consider a thermally activated failure process that is coupled with the production and the diffusion of heat at the fracture tip. In this framework, the rise in temperature only affects the sub-critical crack dynamics and not the mechanical properties of the material. We show that this description can quantitatively reproduce the rupture of two different polymeric materials (namely, the mode I opening of polymethylmethacrylate (PMMA) plates, and the peeling of pressure sensitive adhesive (PSA) tapes), from the very slow to the very fast fracturing regimes, over seven to nine decades of crack propagation velocities. In particular, the fastest regime is obtained with an increase of temperature of thousands of kelvins, on the molecular scale around the crack tip. Although surprising, such an extreme temperature is actually consistent with different experimental observations that accompany the fast propagation of cracks, namely, fractoluminescence (i.e., the emission of visible light during rupture) and a complex morphology of post-mortem fracture surfaces, which could be due to the sublimation of bubbles.
△ Less
Submitted 18 September, 2020; v1 submitted 17 May, 2019;
originally announced May 2019.
-
Thermal weakening of cracks and brittle-ductile transition: a phase model
Authors:
Tom Vincent-Dospital,
Renaud Toussaint,
Alain Cochard,
Knut Jørgen Måløy,
Eirik G. Flekkøy
Abstract:
We present a model for the thermally activated propagation of cracks in elastic matrices. The propagation is considered as a subcritical phenomenon, the kinetics of which being described by an Arrhenius law. In this law, we take the thermal evolution of the crack front into account, assuming that a portion of the released mechanical energy is transformed into heat in a plastic process zone. We sho…
▽ More
We present a model for the thermally activated propagation of cracks in elastic matrices. The propagation is considered as a subcritical phenomenon, the kinetics of which being described by an Arrhenius law. In this law, we take the thermal evolution of the crack front into account, assuming that a portion of the released mechanical energy is transformed into heat in a plastic process zone. We show that such a model leads to a two-phase crack propagation: a first phase at low velocity in which the temperature elevation is of little effect and the propagation is mainly governed by the mechanical load and by the toughness of the medium, and a second phase in which the crack is thermally weakened and propagates at greater velocity. Such a dual behavior can potentially explain the usual stick-slip in brittle fracturing, and we illustrate how with numerical simulations of mode I cracks propagating in thin disordered media. In addition, we predict the existence of a limiting ambient temperature above which the weakened phase ceases to exist and we propose this critical phenomenon as a novel explanation for the brittle-ductile transition of solids.
△ Less
Submitted 25 February, 2020; v1 submitted 14 January, 2019;
originally announced January 2019.
