-
Role of surfactants on droplet formation in piezoacoustic inkjet printing across microsecond-to-second timescales
Authors:
Maaike Rump,
Christian Diddens,
Uddalok Sen,
Michel Versluis,
Detlef Lohse,
Tim Segers
Abstract:
In piezo acoustic drop-on-demand inkjet printing a single droplet is produced for each piezo driving pulse. This droplet is typically multicomponent, including surfactants to control the spreading and drying of the droplet on the substrate. However, the role of these surfactants on the droplet formation process remains rather elusive. Surfactant concentration gradients may manifest across microsec…
▽ More
In piezo acoustic drop-on-demand inkjet printing a single droplet is produced for each piezo driving pulse. This droplet is typically multicomponent, including surfactants to control the spreading and drying of the droplet on the substrate. However, the role of these surfactants on the droplet formation process remains rather elusive. Surfactant concentration gradients may manifest across microsecond-to-second timescales, spanning both the rapid ejection of ink from the nozzle exit and the comparatively slower idling timescale governing the firing of successive droplets. In the present work, we study the influence of surfactants on droplet formation across 6 orders of magnitude in time. To this end, we visualize the microsecond droplet formation process using stroboscopic laser-induced fluorescence microscopy while we vary the nozzle idle time. Our results show that increasing the idle time up to O(1) s affects only the break-up dynamics of the inkjet but not its velocity. By contrast, for idle times $>$ O(1) s, both the break-up dynamics are altered and the velocity of the inkjet increases. We show that the increased velocity results from a decreased surface tension of the ejected droplet, which we extracted from the observed shape oscillations of the jetted droplets in flight. The measured decrease in surface tension is surprising as the $μ$s timescale of droplet formation is much faster than the typical ms-to-s timescale of surfactant adsorption. By varying the bulk surfactant concentration, we show that the fast decrease in surface tension results from a local surfactant concentration increase to more than 200 times the CMC. Our results suggest that a local high concentration of surfactant allows for surfactant adsorption to the interface of an inkjet at the $μ$s-to-ms timescale, which is much faster than the typical ms-to-s timescale of surfactant adsorption.
△ Less
Submitted 31 October, 2024; v1 submitted 4 June, 2024;
originally announced June 2024.
-
A unifying Rayleigh-Plesset-type equation for bubbles in viscoelastic media
Authors:
Alexandros T. Oratis,
Kay Dijs,
Guillaume Lajoinie,
Michel Versluis,
Jacco H. Snoeijer
Abstract:
Understanding the ultrasound pressure-driven dynamics of microbubbles confined in viscoelastic materials is relevant for multiple biomedical applications, ranging from contrast-enhanced ultrasound imaging to ultrasound-assisted drug delivery. The volumetric oscillations of spherical bubbles is analyzed using the Rayleigh-Plesset equation, which describes the conservation of mass and momentum in th…
▽ More
Understanding the ultrasound pressure-driven dynamics of microbubbles confined in viscoelastic materials is relevant for multiple biomedical applications, ranging from contrast-enhanced ultrasound imaging to ultrasound-assisted drug delivery. The volumetric oscillations of spherical bubbles is analyzed using the Rayleigh-Plesset equation, which describes the conservation of mass and momentum in the surrounding medium. Several studies have considered an extension of the Rayleigh-Plesset equation for bubbles embedded into viscoelastic media, but these are restricted to a particular choice of constitutive model and/or to small deformations. Here, we derive a unifying equation applicable to bubbles in viscoelastic media with arbitrary complex moduli and that can account for large bubble deformations. To derive this equation, we borrow concepts from finite-strain theory. We validate our approach by comparing the result of our model to previously published results and extend it to show how microbubbles behave in arbitrary viscoelastic materials. In particular, we use our viscoelastic Rayleigh-Plesset model to compute the bubble dynamics in benchmarked viscoelastic liquids and solids.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Buckling of lipidic ultrasound contrast agents under quasi-static load
Authors:
Georges Chabouh,
Benjamin van Elburg,
Michel Versluis,
Tim Segers,
Catherine Quilliet,
Gwennou Coupier
Abstract:
Collapse of lipidic ultrasound contrast agents under high-frequency compressive load has been historically interpreted by the vanishing of surface tension. By contrast, buckling of elastic shells is known to occur when costly compressible stress is released through bending. Through quasi-static compression experiments on lipidic shells, we analyze the buckling events in the framework of classical…
▽ More
Collapse of lipidic ultrasound contrast agents under high-frequency compressive load has been historically interpreted by the vanishing of surface tension. By contrast, buckling of elastic shells is known to occur when costly compressible stress is released through bending. Through quasi-static compression experiments on lipidic shells, we analyze the buckling events in the framework of classical elastic buckling theory and deduce the mechanical characteristics of these shells. They are then compared to that obtained through acoustic characterization.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Feedback-controlled microbubble generator producing one million monodisperse bubbles per second
Authors:
Benjamin van Elburg,
Gonzalo Collado Lara,
Gert-Wim Bruggert,
Tim Segers,
Michel Versluis,
Guillaume Lajoinie
Abstract:
Monodisperse lipid-coated microbubbles are a promising route to unlock the full potential of ultrasound contrast agents for medical diagnosis and therapy. Here, we present a stand-alone lab-on-a-chip instrument that allows microbubbles to be formed with high monodispersity at high production rates. Key to maintaining a long-term stable, controlled, and safe operation of the microfluidic device wit…
▽ More
Monodisperse lipid-coated microbubbles are a promising route to unlock the full potential of ultrasound contrast agents for medical diagnosis and therapy. Here, we present a stand-alone lab-on-a-chip instrument that allows microbubbles to be formed with high monodispersity at high production rates. Key to maintaining a long-term stable, controlled, and safe operation of the microfluidic device with full control over the output size distribution is an optical transmission based measurement technique that provides real-time information on production rate and bubble size. We feed the data into a feedback loop and demonstrate that this system can control the on-chip bubble radius (2.5 to 20 $μ$m) and the production rate up to $10^6$ bubbles/s. The freshly formed phospholipid-coated bubbles stabilize after their formation to a size approximately two times smaller than their initial on-chip bubble size without loss of monodispersity. The feedback control technique allows for full control over the size distribution of the agent and can aid the development of microfluidic platforms operated by non-specialist end users.
△ Less
Submitted 23 February, 2021;
originally announced April 2021.
-
The retraction of jetted slender viscoelastic liquid filaments
Authors:
Uddalok Sen,
Charu Datt,
Tim Segers,
Herman Wijshoff,
Jacco H. Snoeijer,
Michel Versluis,
Detlef Lohse
Abstract:
Long and slender liquid filaments are produced during inkjet printing, which can subsequently either retract to form a single droplet, or break up to form a primary droplet and one or more satellite droplets. These satellite droplets are undesirable since they degrade the quality and reproducibility of the print. Existing strategies for the suppression of satellite droplet formation include, among…
▽ More
Long and slender liquid filaments are produced during inkjet printing, which can subsequently either retract to form a single droplet, or break up to form a primary droplet and one or more satellite droplets. These satellite droplets are undesirable since they degrade the quality and reproducibility of the print. Existing strategies for the suppression of satellite droplet formation include, among others, adding viscoelasticity to the ink. In the present work, we aim to improve the understanding of the role of viscoelasticity in suppressing satellite droplets in inkjet printing. We demonstrate that very dilute viscoelastic aqueous solutions (concentrations $\sim$ 0.003\% wt. polyethylene oxide (PEO), corresponding to nozzle Deborah number $De_{n}$ $\sim$ 3) can suppress satellite droplet formation. Furthermore, we show that, for a given driving condition, upper and lower bounds of polymer concentration exist, within which satellite droplets are suppressed. Satellite droplets are formed at concentrations below the lower bound, while jetting ceases for concentrations above the upper bound (for fixed driving conditions). Moreover, we observe that, with concentrations in between the two bounds, the filaments retract at velocities larger than the corresponding Taylor-Culick velocity for the Newtonian case. We show that this enhanced retraction velocity can be attributed to the elastic tension due to polymer stretching, which builds up during the initial jetting phase. These results shed some light on the complex interplay between inertia, capillarity, and viscoelasticity for retracting liquid filaments, which is important for the stability and quality of inkjet printing of polymer solutions.
△ Less
Submitted 9 October, 2021; v1 submitted 17 February, 2021;
originally announced February 2021.
-
Rayleigh-Taylor instability by segregation in an evaporating multi-component microdroplet
Authors:
Yaxing Li,
Christian Diddens,
Tim Segers,
Herman Wijshoff,
Michel Versluis,
Detlef Lohse
Abstract:
The evaporation of multi-component droplets is relevant to various applications but challenging to study due to the complex physicochemical dynamics. Recently, Li (2018) reported evaporation-triggered segregation in 1,2-hexanediol-water binary droplets. In this present work, we added 0.5 wt% silicone oil into the 1,2-hexanediol-water binary solution. This minute silicone oil concentration dramatic…
▽ More
The evaporation of multi-component droplets is relevant to various applications but challenging to study due to the complex physicochemical dynamics. Recently, Li (2018) reported evaporation-triggered segregation in 1,2-hexanediol-water binary droplets. In this present work, we added 0.5 wt% silicone oil into the 1,2-hexanediol-water binary solution. This minute silicone oil concentration dramatically modifies the evaporation process as it triggers an early extraction of the 1,2-hexanediol from the mixture. Surprisingly, we observe that the segregation of 1,2-hexanediol forms plumes, rising up from the rim of the sessile droplet towards the apex during the droplet evaporation. By orientating the droplet upside down, i.e., by studying a pendant droplet, the absence of the plumes indicates that the flow structure is induced by buoyancy, which drives a Rayleigh-Taylor instability (i.e., driven by density differences & gravitational acceleration). From micro-PIV measurement, we further prove that the segregation of the non-volatile component (1,2-hexanediol) hinders the evaporation near the contact line, which leads to a suppression of the Marangoni flow in this region. Hence, on long time scales, gravitational effects play the dominant role in the flow structure, rather than Marangoni flows. We compare the measurement of the evaporation rate with the diffusion model of Popov (2005), coupled with Raoult's law and the activity coefficient. This comparison indeed confirms that the silicone-oil-triggered segregation of the non-volatile 1,2-hexanediol significantly delays the evaporation. With an extended diffusion model, in which the influence of the segregation has been implemented, the evaporation can be well described.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Impact
Authors:
Detlef Lohse,
Raymond Bergmann,
Rene' Mikkelsen,
Christiaan Zeilstra,
Devaraj van der Meer,
Michel Versluis,
Ko van der Weele,
Martin van der Hoef,
Hans Kuipers
Abstract:
According to Shoemaker, the "impact of solid bodies is the most fundamental process that has taken place on the terrestrial planets", as they shape the surfaces of all solar system bodies. A lot of information on this process has been extracted from remote observations of impact craters on planetary surfaces. However, the nature of the geophysical impact events is that they are non-reproducible.…
▽ More
According to Shoemaker, the "impact of solid bodies is the most fundamental process that has taken place on the terrestrial planets", as they shape the surfaces of all solar system bodies. A lot of information on this process has been extracted from remote observations of impact craters on planetary surfaces. However, the nature of the geophysical impact events is that they are non-reproducible. Moreover, their scale is enormous and direct observations are not possible. Therefore, we choose an alternate and of course downscaled experimental approach in order to guarantee reproducible results: We prepare very fine sand in a well defined and fully decompactified state by letting gas bubble through it. After turning off the gas stream, we let a steel ball fall on the sand. The series of events in the experiments and corresponding discrete particle simulations is as follows: On impact of the ball, sand is blown away in all directions ("splash") and an impact crater forms. When this cavity collapses, a granular jet emerges and is driven straight into the air. A second jet goes downwards into the air bubble entrained during the process, thus pushing surface material deep into the ground. The air bubble rises slowly towards the surface, causing a granular eruption. In addition to the experiments and the discrete particle simulations we present a simple continuum theory to account for the void collapse leading to the formation of the upward and downward jets. We show that the phenomenon is robust and even works for oblique impacts: the upward jet is then shooting backwards, in the direction where the projectile came from.
△ Less
Submitted 16 June, 2004;
originally announced June 2004.
