-
Ordering and association of patchy particles in narrow channels
Authors:
Péter Gurin,
Szabolcs Varga
Abstract:
We show that the formalism of Wertheim's first order thermodynamic perturbation theory can be generalised for the fluid of anisotropic sticky particles confined to a quasi-one-dimensional channel. Using the transfer matrix method, we prove that the theory is exact if the hard body interaction is additive, only the first neighbors interact and the particles can stick together only along the channel…
▽ More
We show that the formalism of Wertheim's first order thermodynamic perturbation theory can be generalised for the fluid of anisotropic sticky particles confined to a quasi-one-dimensional channel. Using the transfer matrix method, we prove that the theory is exact if the hard body interaction is additive, only the first neighbors interact and the particles can stick together only along the channel. We show that the most convenient treatment of association in narrow channels is to work in NPT ensemble, where all structural and thermodynamic quantities can be expressed as a function of pressure and fraction of sites unbonded.
△ Less
Submitted 21 April, 2025;
originally announced April 2025.
-
Influence of Aspect Ratio and Deformation on the Isotropic-Nematic Crossover in Quasi-One-Dimensional Hard Superellipses
Authors:
Sakineh Mizani,
Martin Oettel,
Péter Gurin,
Szabolcs Varga
Abstract:
We study the orientational ordering and close packing behavior of a quasi-one-dimensional (q1D)
hard superellipse system in which centers of particles are restricted to a line while they can rotate
freely in a two-dimensional plane. Through the aspect ratio (k), the elongation of the particles and
through the deformation parameter (n), the shape can be tuned between ellipses and rectangles.…
▽ More
We study the orientational ordering and close packing behavior of a quasi-one-dimensional (q1D)
hard superellipse system in which centers of particles are restricted to a line while they can rotate
freely in a two-dimensional plane. Through the aspect ratio (k), the elongation of the particles and
through the deformation parameter (n), the shape can be tuned between ellipses and rectangles.
Maxima in the pressure ratio (P/Phd) (where P and Phd are the pressure of hard superellipses and
that of q1D hard disks) are a good indicator for the continuous structural change from isotropic
to nematic order. This change occurs at higher densities than the sharp nematic transitions of
corresponding two-dimensional and three-dimensional hard body systems. Additionally, suitable
close packing exponents describing the close-packing limit show universality in that they depending
only on n and certain combinations are independent of both k and n.
△ Less
Submitted 24 March, 2025;
originally announced March 2025.
-
Universality of the close packing properties and markers of isotropic-to-tetratic crossover in quasi-one-dimensional superdisk fluid
Authors:
Sakineh Mizani,
Martin Oettel,
Péter Gurin,
Szabolcs Varga
Abstract:
We study equilibrium states and ordering regimes of a quasi-one-dimensional system of hard superdisks (anisotropic particles interpolating between disks and squares) where the centers of the particles are constrained to move on a line. A continuous change from a quasi-isotropic to a tetratic regime is found upon increasing the density. Somewhat unexpected, for isobaric states, systems with larger…
▽ More
We study equilibrium states and ordering regimes of a quasi-one-dimensional system of hard superdisks (anisotropic particles interpolating between disks and squares) where the centers of the particles are constrained to move on a line. A continuous change from a quasi-isotropic to a tetratic regime is found upon increasing the density. Somewhat unexpected, for isobaric states, systems with larger and more anisotropic particles in the tetratic regime are denser than systems with smaller and less anisotropic particles in a quasi-isotropic regime. Close packing behaviour is characterised by exponents describing the behaviour of the pressure, the angular fluctuations and the angular correlation length. We obtain two universal, shape-independent relations between them.
△ Less
Submitted 5 December, 2024; v1 submitted 16 September, 2024;
originally announced September 2024.
-
Ordering properties of anisotropic hard bodies in one-dimensional channels
Authors:
Ana M. Montero,
Andrés Santos,
Péter Gurin,
Szabolcs Varga
Abstract:
The phase behavior and structural properties of hard anisotropic particles (prisms and dumbbells) are examined in one-dimensional channels using the Parsons--Lee (PL) theory, and the transfer-matrix and neighbor-distribution methods. The particles are allowed to move freely along the channel, while their orientations are constrained such that one particle can occupy only two or three different len…
▽ More
The phase behavior and structural properties of hard anisotropic particles (prisms and dumbbells) are examined in one-dimensional channels using the Parsons--Lee (PL) theory, and the transfer-matrix and neighbor-distribution methods. The particles are allowed to move freely along the channel, while their orientations are constrained such that one particle can occupy only two or three different lengths along the channel. In this confinement setting, hard prisms behave as an additive mixture, while hard dumbbells behave as a non-additive one. We prove that all methods provide exact results for the phase properties of hard prisms, while only the neighbor-distribution and transfer-matrix methods are exact for hard dumbbells. This shows that non-additive effects are incorrectly included into the PL theory, which is a successful theory of the isotropic-nematic phase transition of rod-like particles in higher dimensions. In the one-dimensional channel, the orientational ordering develops continuously with increasing density, i.e., the system is isotropic only at zero density, while it becomes perfectly ordered at the close-packing density. We show that there is no orientational correlation in the hard prism system, while the hard dumbbells are orientationally correlated with diverging correlation length at close packing. On the other hand, positional correlations are present for all the systems, the associated correlation length diverging at close packing.
△ Less
Submitted 21 October, 2023; v1 submitted 27 July, 2023;
originally announced July 2023.
-
Three-step melting of hard superdisks in two dimensions
Authors:
Péter Gurin,
Szabolcs Varga,
Gerardo Odriozola
Abstract:
We explore the link between the melting scenarios of two-dimensional systems of hard disks and squares through replica-exchange Monte Carlo simulations of hard superdisks. The well-known melting scenarios are observed in the disk and square limits, while we observe an unusual three-step scenario for dual-shapes. We find that two mesophases mediate the melting: a hexatic phase and another fluid pha…
▽ More
We explore the link between the melting scenarios of two-dimensional systems of hard disks and squares through replica-exchange Monte Carlo simulations of hard superdisks. The well-known melting scenarios are observed in the disk and square limits, while we observe an unusual three-step scenario for dual-shapes. We find that two mesophases mediate the melting: a hexatic phase and another fluid phase with a $D_2$ local symmetry, we call it rhombatic, where both bond and particle orientational orders are quasi-long-range. Our results show that not only can the melting process of liquid-crystal forming molecules be complicated, where elongated shapes stabilize several mesophases, but also that of anisotropic quasispherical molecules.
△ Less
Submitted 3 December, 2020; v1 submitted 17 November, 2020;
originally announced November 2020.
-
Demixing and tetratic ordering in some binary mixtures of hard superellipses
Authors:
Sakine Mizani,
Peter Gurin,
Roohollah Aliabadi,
Hamdollah Salehi,
Szabolcs Varga
Abstract:
We examine the fluid phase behaviour of the binary mixture of hard superellipses using the scaled particle theory The superellipse is a general two dimensional convex object which can be tuned between circular and rectangular shapes continuously at a given aspect ratio. We find that the shape of the particle affects strongly the stability of isotropic nematic and tetratic phases even if the aspect…
▽ More
We examine the fluid phase behaviour of the binary mixture of hard superellipses using the scaled particle theory The superellipse is a general two dimensional convex object which can be tuned between circular and rectangular shapes continuously at a given aspect ratio. We find that the shape of the particle affects strongly the stability of isotropic nematic and tetratic phases even if the aspect ratios of both species are fixed. While the isotropic isotropic demixing transition can be ruled out using the scaled particle theory the first order isotropic nematic and the nematic nematic demixing transition can be stabilized with strong fractionation between the components. It is observed that the demixing tendency is strongest in small rectangle large ellipse mixtures. Interestingly, it is possible to stabilize the tetratic order at lower densities in the mixture of hard squares and rectangles where the long rectangles form nematic phase, while the squares stay in tetratic order.
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
-
Orientational ordering and layering of hard plates in narrow slit-like pores
Authors:
Sakine Mizani,
Roohollah Aliabadi,
Hamdollah Salehi,
Szabolcs Varga
Abstract:
We examine the ordering behavior of hard plate-like particle in a very narrow slit-like pore using the Parsons-Lee density functional theory and the restricted orientation approximation. We observe that the plates are orientationally ordered and align perpendicularly (face-on) to the walls at low densities, a first order layering transition occurs between uniaxial nematic structures having n and n…
▽ More
We examine the ordering behavior of hard plate-like particle in a very narrow slit-like pore using the Parsons-Lee density functional theory and the restricted orientation approximation. We observe that the plates are orientationally ordered and align perpendicularly (face-on) to the walls at low densities, a first order layering transition occurs between uniaxial nematic structures having n and n+1 layers at intermediate densities and even a phase transition between a monolayer with parallel (edge-on) orientational order and n layers with perpendicular one can be detected at high densities. In addition to this, the edge-on monolayer is usually biaxial nematic and a uniaxial-biaxial nematic phase transition can be also seen at very high densities.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Biaxial layering transition of hard rod-like particles in narrow slit-like pores
Authors:
Hamdollah Salehi,
Sakine Mizani,
Roohollah Aliabadi,
Szabolcs Varga
Abstract:
The phase behavior of hard rectangular rods with length L and diameter D is studied in a narrow slit-like pore using the Parsons-Lee density functional theory. Using the restricted orientation approximation, we find strong adsorption at the walls with planar ordering, second order uniaxial-biaxial ordering transitions and first order layering transitions. The layering transition takes place betwee…
▽ More
The phase behavior of hard rectangular rods with length L and diameter D is studied in a narrow slit-like pore using the Parsons-Lee density functional theory. Using the restricted orientation approximation, we find strong adsorption at the walls with planar ordering, second order uniaxial-biaxial ordering transitions and first order layering transitions. The layering transition takes place between two fluids having n and n+1 layers, where the layer spacing is in the order of D. In the case of weak shape anisotropy (L/D=3), the coexisting fluids can be either uniaxial or biaxial, while both phases are found to be biaxial for L/D=6 and L/D=9. Interestingly, even two or more layering transitions can be observed with increasing density at a given shape anisotropy and pore width.
△ Less
Submitted 11 August, 2018;
originally announced August 2018.
-
Positional ordering of hard adsorbate particles in tubular nanopores
Authors:
Péter Gurin,
Szabolcs Varga,
Yuri Martínez-Ratón,
Enrique Velasco
Abstract:
The phase behaviour and structural properties of a monolayer of hard particles is examined in such a confinement, where the adsorbed particles are constrained to the surface of a narrow hard cylindrical pore. The diameter of the pore is chosen such that only first and second neighbour interactions occur between the hard particles. The transfer operator method of Percus and Zhang [Mol. Phys., 69, 3…
▽ More
The phase behaviour and structural properties of a monolayer of hard particles is examined in such a confinement, where the adsorbed particles are constrained to the surface of a narrow hard cylindrical pore. The diameter of the pore is chosen such that only first and second neighbour interactions occur between the hard particles. The transfer operator method of Percus and Zhang [Mol. Phys., 69, 347 (1990)] is reformulated to obtain information about the structure of the monolayer. We have found that a true phase transition is not possible in the examined range of pore diameters. The monolayer of hard spheres undergoes a structural change from fluid-like order to a zigzag-like solid one with increasing surface density. The case of hard cylinders is different in the sense that a layering takes place continuously between a low density one-row and a high density two-row monolayer. Our results reveal a clear discrepancy with classical density functional theories, which do not distinguish smectic-like ordering in bulk from that in narrow periodic pores.
△ Less
Submitted 9 May, 2018; v1 submitted 15 March, 2018;
originally announced March 2018.
-
Ordering transitions of weakly anisotropic hard rods in narrow slit-like pores
Authors:
Roohollah Aliabadi,
Peter Gurin,
Enrique Velasco,
Szabolcs Varga
Abstract:
The effect of strong confinement on the positional and orientational ordering is examined in a system of hard rectangular rods with length L and diameter D (L>D) using the Parsons-Lee modification of the second virial density functional theory. The rods are nonmesogenic (L/D<3)and confined between two parallel hard walls, where the width of the pore (H) is chosen in such a way that both planar (pa…
▽ More
The effect of strong confinement on the positional and orientational ordering is examined in a system of hard rectangular rods with length L and diameter D (L>D) using the Parsons-Lee modification of the second virial density functional theory. The rods are nonmesogenic (L/D<3)and confined between two parallel hard walls, where the width of the pore (H) is chosen in such a way that both planar (particle's long axis parallel to the walls) and homeotropic (particle's long axis perpendicular to the walls) orderings are possible and a maximum of two layers are allowed to form in the pore. In the extreme confinement limit of ,where only one layer structures appear, we observe a structural transition from a planar to a homeotropic fluid layer with increasing density, which becomes sharper as L->H. In wider pores (2D<H<3D) planar order with two layers, homeotropic order, and even combined bilayer structures (one layer is homeotropic, while the other is planar) can be stabilized at high densities. Moreover, first order phase transitions can be seen between different structures. One of them emerges between a monolayer and a bilayer with planar orders at relatively low packing fractions.
△ Less
Submitted 4 October, 2017;
originally announced October 2017.
-
Critical behavior of hard squares in strong confinement
Authors:
Peter Gurin,
Gerardo Odriozola,
Szabolcs Varga
Abstract:
We examine the phase behavior of a quasi-one-dimensional system of hard squares with side-length $σ$, where the particles are confined between two parallel walls and only nearest neighbor interactions occur. As in our previous work (PRE, 94, 050603 (2016)), the transfer operator method is used, but here we impose a restricted orientation and position approximation to yield an analytic description…
▽ More
We examine the phase behavior of a quasi-one-dimensional system of hard squares with side-length $σ$, where the particles are confined between two parallel walls and only nearest neighbor interactions occur. As in our previous work (PRE, 94, 050603 (2016)), the transfer operator method is used, but here we impose a restricted orientation and position approximation to yield an analytic description of the physical properties. This allows us to study the parallel fluid-like to zigzag solid-like structural transition, where the compressibility and heat capacity peaks sharpen and get higher as $H \rightarrow H_c=2\sqrt{2}-1\approx 1.8284$ and $p \rightarrow p_c= \infty$. Here $H$ is the width of the channel measured in $σ$ units and $p$ is the pressure. We have found that this structural change becomes critical at the $(p_c,H_c)$ point. The obtained critical exponents belong to the universality class of the one-dimensional Ising model. We believe this behavior holds for the unrestricted orientational and positional case.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Ordering of hard rectangles in strong confinement
Authors:
Peter Gurin,
Szabolcs Varga,
Miguel Gonzalez-Pinto,
Yuri Martinez-Raton,
Enrique Velasco
Abstract:
Using transfer operator and fundamental measure theories, we examine the structural and thermodynamic properties of hard rectangles confined between two parallel hard walls. The side lengths of the rectangle ($L$ and $D$, $L>D$) and the pore width ($H$) are chosen such that maximum two layers are allowed to form in planar order ($L$ is parallel to the wall), while only one in homeotropic order (…
▽ More
Using transfer operator and fundamental measure theories, we examine the structural and thermodynamic properties of hard rectangles confined between two parallel hard walls. The side lengths of the rectangle ($L$ and $D$, $L>D$) and the pore width ($H$) are chosen such that maximum two layers are allowed to form in planar order ($L$ is parallel to the wall), while only one in homeotropic order ($D$ is parallel to the wall). We observe three different structures: (i) a low density fluid phase with parallel alignment to the wall, (ii) an intermediate and high density fluid phase with two layers and planar ordering and (iii) a dense single fluid layer with homeotropic ordering. The appearance of these phases and the change in the ordering direction with density is a consequence of the varying close packing structures with $L$ and $H$. Interestingly, even three different structures can be observed with increasing density if $L$ is close to $H$.
△ Less
Submitted 23 February, 2017;
originally announced February 2017.
-
Tracking three-phase coexistences in binary mixtures of hard plates and spheres
Authors:
Roohollah Aliabadi,
Mahmood Moradi,
Szabolcs Varga
Abstract:
The stability of demixing phase transition in binary mixtures of hard plates (with thickness L and diameter D) and hard spheres (with diameter $σ$) is studied by means of Parsons-Lee theory. The isotropic-isotropic demixing, which is found in mixtures of large spheres and small plates, is very likely to be preempted by crystallization. In contrast, the nematic-nematic demixing, which is obtained i…
▽ More
The stability of demixing phase transition in binary mixtures of hard plates (with thickness L and diameter D) and hard spheres (with diameter $σ$) is studied by means of Parsons-Lee theory. The isotropic-isotropic demixing, which is found in mixtures of large spheres and small plates, is very likely to be preempted by crystallization. In contrast, the nematic-nematic demixing, which is obtained in mixtures of large plates and small spheres, can be stabilized at low diameter ratios ($σ$/D) and aspect ratios (L/D). At intermediate values of $σ$/D, where the sizes of the components are similar, neither the isotropic-isotropic nor the nematic-nematic demixing can be stabilized, but a very strong fractionation takes place between a plate rich nematic and a sphere rich isotropic phases. Our results show that the excluded volume interactions are capable alone to explain the experimental observation of the nematic-nematic demixing, but they fail for the description of isotropic-isotropic one (Chen et. al., Soft Matter, 11, 5775 (2015)).
△ Less
Submitted 17 February, 2016;
originally announced April 2016.
-
Orientational ordering of confined hard rods: the effect of shape anisotropy on surface ordering and capillary nematization
Authors:
R. Aliabadi,
M. Moradi,
S. Varga
Abstract:
We examine the ordering properties of rectangular hard rods with length L and diameter D at a single planar wall and between two parallel hard walls using the second-virial density functional theory. The theory is implemented in the three-state Zwanzig approximation, where only three mutually perpendicular directions are allowed for the orientations of hard rods. The effect of varying shape anisot…
▽ More
We examine the ordering properties of rectangular hard rods with length L and diameter D at a single planar wall and between two parallel hard walls using the second-virial density functional theory. The theory is implemented in the three-state Zwanzig approximation, where only three mutually perpendicular directions are allowed for the orientations of hard rods. The effect of varying shape anisotropy is examined at L/D=10, 15 and 20. In contact with a single hard wall, the density profiles show planar ordering, damped oscillatory behavior, and wall induced surface ordering transition below the coexisting isotropic density of bulk isotropic-nematic (I-N) phase transition. Upon approaching the coexisting isotropic density, the thickness of nematic film diverges logarithmically, i.e. the nematic wetting is complete for any shape anisotropy. In the case of confinement between two parallel hard walls, it is found that the continuous surface ordering transition depends strongly on the distance between confining walls (H) for H<L, while it depends weakly on H for H>L. The minimal density at which a surface ordering transition can be realized is located at around H~2D for all studied shape anisotropies due to the strong interference effect between the two hard walls. The first order I-N phase transition of the bulk system becomes surface ordered isotropic (IB)-capillary nematic (NB) phase transition in the slit pore. This first order IB-NB transition weakens with decreasing pore width and terminates in a critical point for all studied shape anisotropies.
△ Less
Submitted 10 February, 2016;
originally announced February 2016.
-
Phase behaviour and correlations of parallel hard squares: From highly confined to bulk systems
Authors:
Miguel Gonzalez-Pinto,
Yuri Martinez-Raton,
Szabolcs Varga,
Peter Gurin,
Enrique Velasco
Abstract:
We study a fluid of two-dimensional parallel hard squares in bulk and under confinement in channels, with the aim of evaluating the performance of Fundamental-Measure Theory (FMT). To this purpose, we first analyse the phase behaviour of the bulk system using FMT and Percus-Yevick theory, and compare the results with MD and MC simulations. In a second step, we study the confined system and check t…
▽ More
We study a fluid of two-dimensional parallel hard squares in bulk and under confinement in channels, with the aim of evaluating the performance of Fundamental-Measure Theory (FMT). To this purpose, we first analyse the phase behaviour of the bulk system using FMT and Percus-Yevick theory, and compare the results with MD and MC simulations. In a second step, we study the confined system and check the results against those obtained from Transfer Matrix Method and from our own Monte Carlo simulations. Squares are confined to channels with parallel walls at angles of 0$^{\circ}$ or 45$^{\circ}$ relative to the diagonals of the parallel hard squares, respectively, which allows for an assessment of the effect of the external-potential symmetry on the fluid structural properties. In general FMT overestimates bulk correlations, predicting the existence of a columnar phase (absent in simulations) prior to crystallisation. The equation of state predicted by FMT compares well with simulations, although the PY approach with the virial route is better in some range of packing fractions. The FMT is highly accurate for the structure and correlations of the confined fluid due to the dimensional crossover property fulfilled by the theory. Both density profiles and equations of state of the confined system are accurately predicted by the theory. The highly non-uniform pair correlations inside the channel are also very well described by FMT.
△ Less
Submitted 26 December, 2015;
originally announced December 2015.
-
Effect of orientational restriction on monolayers of hard ellipsoids
Authors:
Szabolcs Varga,
Yuri Martinez-Raton,
Enrique Velasco,
Gustavo Bautista-Carbajal,
Gerardo Odriozola
Abstract:
The effect of out-of-plane orientational freedom on the orientational ordering properties of a monolayer of hard ellipsoids is studied using Parsons-Lee scaling approach and replica exchange Monte Carlo computer simulation. Prolate and oblate ellipsoids exhibit very different ordering properties, namely, the axes of revolution of prolate particles tend to lean out, while those of oblate ones prefe…
▽ More
The effect of out-of-plane orientational freedom on the orientational ordering properties of a monolayer of hard ellipsoids is studied using Parsons-Lee scaling approach and replica exchange Monte Carlo computer simulation. Prolate and oblate ellipsoids exhibit very different ordering properties, namely, the axes of revolution of prolate particles tend to lean out, while those of oblate ones prefer to lean into the confining plane. The driving mechanism of this is that the particles try to maximize the available free area on the confining surface, which can be achieved by minimizing the cross section areas of the particles with the plane. In the lack out-of-plane orientational freedom the monolayer of prolate particles is identical to a two-dimensional hard ellipse system, which undergoes an isotropic-nematic ordering transition with increasing density. With gradually switching on the out-of-plane orientational freedom the prolate particles lean out from the confining plane and a destabilisation of the in-plane isotropic-nematic phase transition is observed. The system of oblate particles behaves oppositely to that of prolates. It corresponds to a two-dimensional system of hard disks in the lack of out-of-plane freedom, while it behaves similar to that of hard ellipses in the freely rotating case.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
A heuristic rule for classification of classical fluids: Master curves for Mie, Yukawa and square-well potentials
Authors:
Pedro Orea,
Szabolcs Varga,
Gerardo Odriozola
Abstract:
A shift of the vapor-liquid coexistence curves by the critical value of the reduced second virial coefficient yields striking data collapses to define master curves. This is observed for the Mie, Yukawa and square-well fluids of different attractive ranges. This modification of the extended corresponding-states law of Noro and Frenkel strongly improves the outcomes from the van der Waals principle…
▽ More
A shift of the vapor-liquid coexistence curves by the critical value of the reduced second virial coefficient yields striking data collapses to define master curves. This is observed for the Mie, Yukawa and square-well fluids of different attractive ranges. This modification of the extended corresponding-states law of Noro and Frenkel strongly improves the outcomes from the van der Waals principle. Moreover, this shifted extended principle makes the master curves from Mie and Yukawa potentials to be one on top of the other. The square-well potential forms two well defined master curves, each one corresponding to different effective critical exponents.
△ Less
Submitted 11 May, 2015; v1 submitted 14 April, 2015;
originally announced April 2015.
-
Beyond the single-file fluid limit using transfer matrix method: Exact results for confined parallel hard squares
Authors:
Peter Gurin,
Szabolcs Varga
Abstract:
We extend the transfer matrix method of one-dimensional hard core fluids placed between confining walls for that case where the particles can pass each other and at most two layers can form. We derive an eigenvalue equation for a quasi-one-dimensional system of hard squares confined between two parallel walls, where the pore width is between $σ$ and $3σ$ ( $σ$ is the side length of the square). Th…
▽ More
We extend the transfer matrix method of one-dimensional hard core fluids placed between confining walls for that case where the particles can pass each other and at most two layers can form. We derive an eigenvalue equation for a quasi-one-dimensional system of hard squares confined between two parallel walls, where the pore width is between $σ$ and $3σ$ ( $σ$ is the side length of the square). The exact equation of state and the nearest neighbour distribution functions show three different structures: a fluid phase with one layer, a fluid phase with two layers and a solid-like structure where the fluid layers are strongly correlated. The structural transition between differently ordered fluids develops continuously with increasing density, i.e. no thermodynamic phase transition occurs. The high density structure of the system consists of clusters with two layers which are broken with particles staying in the middle of the pore.
△ Less
Submitted 26 June, 2015; v1 submitted 23 February, 2015;
originally announced February 2015.
-
Effect of shape biaxiality on the phase behavior of colloidal liquid-crystal monolayers
Authors:
Miguel Gonzalez-Pinto,
Yuri Martinez-Raton,
Enrique Velasco,
Szabolcs Varga
Abstract:
We extend our previous work on monolayers of uniaxial particles [J. Chem. Phys. 140, 204906 (2014)] to study the effect of particle biaxiality on the phase behavior of liquid-crystal monolayers. Particles are modelled as board-like hard bodies with three different edge lengths $σ_1\geqσ_2\geqσ_3$, and use is made of the restricted-orientation approximation (Zwanzig model). A density-functional for…
▽ More
We extend our previous work on monolayers of uniaxial particles [J. Chem. Phys. 140, 204906 (2014)] to study the effect of particle biaxiality on the phase behavior of liquid-crystal monolayers. Particles are modelled as board-like hard bodies with three different edge lengths $σ_1\geqσ_2\geqσ_3$, and use is made of the restricted-orientation approximation (Zwanzig model). A density-functional formalism based on the fundamental-measure theory is used to calculate phase diagrams for a wide range of values of the largest aspect ratio ($κ_1=σ_1/σ_3\in[1,100]$). We find that particle biaxiality in general destabilizes the biaxial nematic phase already present in monolayers of uniaxial particles. While plate-like particles exhibit strong biaxial ordering, rod-like ones with $κ_1>21.34$ exhibit reentrant uniaxial and biaxial phases. As particle geometry is changed from uniaxial- to increasingly biaxial-rod-like, the region of biaxiality is reduced, eventually ending in a critical-end point. For $κ_1>60$, a density gap opens up in which the biaxial nematic phase is stable for any particle biaxiality. Regions of the phase diagram where packing-fraction inversion occurs (i.e. packing fraction is a decreasing function of density) are found. Our results are compared with the recent experimental studies on nematic phases of magnetic nanorods.
△ Less
Submitted 24 October, 2014;
originally announced October 2014.
-
Hard rods in a cylindrical pore: the nematic-to-smectic phase transition
Authors:
Szabolcs Varga,
Yuri Martinez-Raton,
Enrique Velasco
Abstract:
The effect of cylindrical confinement on the phase behaviour of a system of parallel hard rods is studied using Onsager's second virial theory. The hard rods are represented as hard cylinders of diameter $D$ and length $L$, while the cylindrical pore is infinite with diameter $W$. The interaction between the wall and the rods is hard repulsive, and it is assumed that molecules are parallel to the…
▽ More
The effect of cylindrical confinement on the phase behaviour of a system of parallel hard rods is studied using Onsager's second virial theory. The hard rods are represented as hard cylinders of diameter $D$ and length $L$, while the cylindrical pore is infinite with diameter $W$. The interaction between the wall and the rods is hard repulsive, and it is assumed that molecules are parallel to the surface of the pore (planar anchoring). In very narrow pores ($D<W<2 D$), the structure is homogeneous and the system behaves as a one-dimensional Tonks gas. For wider pores, inhomogeneous fluid structures emerge because of the lowering of the average excluded volume due to the wall-particle interaction. The bulk nematic-smectic A phase transition is replaced by a transition between inhomogeneous nematic and smectic A phases. The smectic is destabilized with respect to the nematic for decreasing pore width; this effect becomes substantial for $W<10 D$. For $W>100 D$, results for bulk and confined fluids agree well due to the short range effect of the wall ($\sim 3-4D$).
△ Less
Submitted 8 August, 2013;
originally announced August 2013.
-
Structural properties of hard disks in a narrow tube
Authors:
S. Varga,
G. Balló,
P. Gurin
Abstract:
Positional ordering of a two-dimensional fluid of hard disks is examined in such narrow tubes where only the nearest-neighbor interactions take place. Using the exact transfer-matrix method the transverse and longitudinal pressure components and the correlation function are determined numerically. Fluid-solid phase transition does not occur even in the widest tube, where the method just loses its…
▽ More
Positional ordering of a two-dimensional fluid of hard disks is examined in such narrow tubes where only the nearest-neighbor interactions take place. Using the exact transfer-matrix method the transverse and longitudinal pressure components and the correlation function are determined numerically. Fluid-solid phase transition does not occur even in the widest tube, where the method just loses its exactness, but the appearance of the dramatic change in the equation of state and the longitudinal correlation function shows that the system undergoes a structural change from a fluid to a solid-like order. The pressure components show that the collisions are dominantly longitudinal at low densities, while they are transverse in the vicinity of close packing density. The transverse correlation function shows that the size of solid-like domains grows exponentially with increasing pressure and the correlation length diverges at close packing. It is managed to find an analytically solvable model by expanding the contact distance up to first order. The approximate model, which corresponds to the system of hard parallel rhombuses, behaves very similarly to the system of hard disks.
△ Less
Submitted 24 October, 2011; v1 submitted 20 August, 2011;
originally announced August 2011.
-
Mesophase formation in a system of top-shaped hard molecules: Density functional theory and Monte Carlo simulation
Authors:
D. de las Heras,
S. Varga,
F. J. Vesely
Abstract:
We present the phase diagram of a system of mesogenic top-shaped molecules based on the Parsons- Lee density functional theory and Monte Carlo simulation. The molecules are modeled as a hard spherocylinder with a hard sphere embedded in its center. The stability of five different phases is studied, namely, isotropic, nematic, smectic A, smectic C, and columnar phases. The positionally ordered phas…
▽ More
We present the phase diagram of a system of mesogenic top-shaped molecules based on the Parsons- Lee density functional theory and Monte Carlo simulation. The molecules are modeled as a hard spherocylinder with a hard sphere embedded in its center. The stability of five different phases is studied, namely, isotropic, nematic, smectic A, smectic C, and columnar phases. The positionally ordered phases are investigated only for the case of parallel alignment. It is found that the central spherical unit destabilizes the nematic with respect to the isotropic phase, while increasing the length of the cylinder has the opposite effect. Also, the central hard sphere has a strong destabilizing effect on the smectic A phase, due the inefficient packing of the molecules into layers. For large hard sphere units the smectic A phase is completely replaced by a smectic C structure. The columnar phase is first stabilized with increasing diameter of the central unit, but for very large hard sphere units it becomes less stable again. The density functional results are in good agreement with the simulations.
△ Less
Submitted 10 June, 2011;
originally announced June 2011.
-
Biaxial nematic phases in fluids of hard board-like particles
Authors:
Yuri Martinez-Raton,
Szabolcs Varga,
Enrique Velasco
Abstract:
We use density-functional theory, of the fundamental-measure type, to study the relative stability of the biaxial nematic phase, with respect to non-uniform phases such as smectic and columnar, in fluids made of hard board-like particles with sizes $σ_1>σ_2>σ_3$. A restricted-orientation (Zwanzig) approximation is adopted. Varying the ratio $κ_1=σ_1/σ_2$ while keeping $κ_2=σ_2/σ_3$, we predict pha…
▽ More
We use density-functional theory, of the fundamental-measure type, to study the relative stability of the biaxial nematic phase, with respect to non-uniform phases such as smectic and columnar, in fluids made of hard board-like particles with sizes $σ_1>σ_2>σ_3$. A restricted-orientation (Zwanzig) approximation is adopted. Varying the ratio $κ_1=σ_1/σ_2$ while keeping $κ_2=σ_2/σ_3$, we predict phase diagrams for various values of $κ_2$ which include all the uniform phases: isotropic, uniaxial rod- and plate-like nematics, and biaxial nematic. In addition, spinodal instabilities of the uniform phases with respect to fluctuations of the smectic, columnar and plastic-solid type, are obtained. In agreement with recent experiments, we find that the biaxial nematic phase begins to be stable for $κ_2\simeq 2.5$. Also, as predicted by previous theories and simulations on biaxial hard particles, we obtain a region of biaxility centred on $κ_1\approxκ_2$ which widens as $κ_2$ increases. For $κ_2\agt 5$ the region $κ_2\approxκ_1$ of the packing-fraction vs. $κ_1$ phase diagrams exhibits interesting topologies which change qualitatively with $κ_2$. We have found that an increasing biaxial shape anisotropy favours the formation of the biaxial nematic phase. Our study is the first to apply FMT theory to biaxial particles and, therefore, it goes beyond the second-order virial approximation. Our prediction that the phase diagram must be asymmetric is a genuine result of the present approach, which is not accounted for by previous studies based on second-order theories.
△ Less
Submitted 2 March, 2011;
originally announced March 2011.
-
Towards understanding the ordering behavior of hard needles: New analytical solutions in one dimension
Authors:
Péter Gurin,
Szabolcs Varga
Abstract:
We re-examine the ordering behavior of a one-dimensional fluid of freely rotating hard needles, where the centers of mass of the particles are restricted to a line. Analytical equations are obtained for the equation of state, order parameter and orientational correlation functions using the transfer-matrix method if some simplifying assumptions are applied for either the orientational freedom or t…
▽ More
We re-examine the ordering behavior of a one-dimensional fluid of freely rotating hard needles, where the centers of mass of the particles are restricted to a line. Analytical equations are obtained for the equation of state, order parameter and orientational correlation functions using the transfer-matrix method if some simplifying assumptions are applied for either the orientational freedom or the contact distance between two needles. The two-state Zwanzig model accounts for the orientational ordering, but it produces unphysical pressure at high densities and there is no orientational correlation. The four-state Zwanzig model gives reasonable results for orientational correlation function, but the pressure is still poorly represented at high densities. In the continuum limit, apart from the orientational correlation length it is managed to reproduce all relevant bulk properties of the hard needles using an approximate formula for the contact distance. The results show that the orientational correlation length diverges at zero and infinite pressures. The high density behavior of needles is not resolved.
△ Less
Submitted 25 February, 2011; v1 submitted 18 February, 2011;
originally announced February 2011.
-
Competition between capillarity, layering and biaxiality in a confined liquid crystal
Authors:
Szabolcs Varga,
Yuri Martinez-Raton,
Enrique Velasco
Abstract:
The effect of confinement on the phase behaviour and structure of fluids made of biaxial hard particles (cuboids) is examined theoretically by means of Onsager second-order virial theory in the limit where the long particle axes are frozen in a mutually parallel configuration. Confinement is induced by two parallel planar hard walls (slit-pore geometry), with particle long axes perpendicular to th…
▽ More
The effect of confinement on the phase behaviour and structure of fluids made of biaxial hard particles (cuboids) is examined theoretically by means of Onsager second-order virial theory in the limit where the long particle axes are frozen in a mutually parallel configuration. Confinement is induced by two parallel planar hard walls (slit-pore geometry), with particle long axes perpendicular to the walls (perfect homeotropic anchoring). In bulk, a continuous nematic-to-smectic transition takes place, while shape anisotropy in the (rectangular) particle cross section induces biaxial ordering. As a consequence, four bulk phases, uniaxial and biaxial nematic and smectic phases, can be stabilised as the cross-sectional aspect ratio is varied. On confining the fluid, the nematic-to-smectic transition is suppressed, and either uniaxial or biaxial phases, separated by a continuous trasition, can be present. Smectic ordering develops continuously from the walls for increasing particle concentration (in agreement with the supression of nematic-smectic second order transition at confinement), but first-order layering transitions, involving structures with n and n+1 layers, arise in the confined fluid at high concentration. Competition between layering and uniaxial-biaxial ordering leads to three different types of layering transitions, at which the two coexisting structures can be both uniaxial, one uniaxial and another biaxial, or both biaxial. Also, the interplay between molecular biaxiality and wall interactions is very subtle: while the hard wall disfavours the formation of the biaxial phase, biaxiality is against the layering transitions, as we have shown by comparing the confined phase behaviour of cylinders and cuboids. The predictive power of Onsager theory is checked and confirmed by performing some calculations based on fundamental-measure theory.
△ Less
Submitted 28 April, 2010;
originally announced April 2010.
-
Biaxial nematic and smectic phases of parallel particles with different cross sections
Authors:
Yuri Martinez-Raton,
Szabolcs Varga,
Enrique Velasco
Abstract:
We have calculated the phase diagrams of one--component fluids made of five types of biaxial particles differing in their cross sections. The orientation of the principal particle axis is fixed in space, while the second axis is allowed to freely rotate. We have constructed a free-energy density functional based on fundamental--measure theory to study the relative stability of nematic and smecti…
▽ More
We have calculated the phase diagrams of one--component fluids made of five types of biaxial particles differing in their cross sections. The orientation of the principal particle axis is fixed in space, while the second axis is allowed to freely rotate. We have constructed a free-energy density functional based on fundamental--measure theory to study the relative stability of nematic and smectic phases with uniaxial, biaxial and tetratic symmetries. Minimization of the density functional allows us to study the phase behavior of the biaxial particles as a function of the cross-section geometry. For low values of the aspect ratio of the particle cross section, we obtain smectic phases with tetratic symmetry, although metastable with respect to the crystal, as our MC simulation study indicates. For large particle aspect ratios and in analogy with previous work [Phys. Chem. Chem. Phys. 5, 3700 (2003)], we have found a four--phase point where four spinodals, corresponding to phase transitions between phases with different symmetries, meet together. The location of this point is quite sensitive to particle cross section, which suggests that optimizing the particle geometry could be a useful criterion in the design of colloidal particles that can exhibit an increased stability of the biaxial nematic phase with respect to other competing phases with spatial order.
△ Less
Submitted 17 June, 2008;
originally announced June 2008.
-
Smectic ordering in athermal systems of rod-like triblock copolymers
Authors:
Szabolcs Varga,
Seth Fraden
Abstract:
The phase behavior of the system of parallel rigid triblock copolymers is examined using the second-virial density functional theory. The triblock particle consists of two identical infinitely thin hard rods of finite lengths on the opposite ends of one central hard cylinder with nonzero length and diameter. Stability analyses and free energy calculations show that the system of parallel particl…
▽ More
The phase behavior of the system of parallel rigid triblock copolymers is examined using the second-virial density functional theory. The triblock particle consists of two identical infinitely thin hard rods of finite lengths on the opposite ends of one central hard cylinder with nonzero length and diameter. Stability analyses and free energy calculations show that the system of parallel particles can form not only uniform nematic and smectic A phases, but a smectic-C phase too. The stability and structure of the tilted structure is controlled by only the diameter and the length of the central cylinder segment. Interestingly, the diameter effects only the layer tilting and the periodicity, but not the packing fraction of the nematic to smectic-C transition. For all values of cylinder length the usual smectic-A and smectic-C transitions compete with each other and no nematic-columnar transition is observed. At low and high cylinder length the smectic-A phase is stabilized first, while the smectic C is the most stable for intermediate length values.
△ Less
Submitted 12 October, 2007;
originally announced October 2007.
-
Nematic phase transitions in mixtures of thin and thick colloidal rods
Authors:
Kirstin Purdy,
Szabolcs Varga,
Amparo Galindo,
George Jackson,
Seth Fraden
Abstract:
We present the first experimental measurements of the isotropic and nematic phases of mixtures of thin, charged semiflexible fd virus, and thick, fd-PEG created by covalently grafting poly-(ethylene glycol) to the the surface of fd, rods. The fd-PEG is sterically stabilized and its phase behavior is independent of ionic strength. The fd is charged. Therefore, by varying the ionic strength of a m…
▽ More
We present the first experimental measurements of the isotropic and nematic phases of mixtures of thin, charged semiflexible fd virus, and thick, fd-PEG created by covalently grafting poly-(ethylene glycol) to the the surface of fd, rods. The fd-PEG is sterically stabilized and its phase behavior is independent of ionic strength. The fd is charged. Therefore, by varying the ionic strength of a mixture of fd and fd-PEG, only the effective diameter of the bare fd rods changes, subsequently varying the effective diameter ratio (d=D_fd-PEG/D_fd) from 3.7 to 1. In solution, binary mixtures of fd and fd-PEG are shown to exhibit isotropic-nematic, isotropic-nematic-nematic and nematic-nematic coexisting phases with increasing concentration. We measure the binary phase diagrams as a function of composition, total concentration, and ionic strength. We find a lower critical point in the nematic-nematic coexistence region which has not been observed previously. These experimental results resolve a controversy in the literature concerning the evolution of the nematic-nematic phase separation with concentration. The experimental results are qualitatively described by a rescaled Onsager-type theory for the phase behavior of binary rod mixtures.
△ Less
Submitted 15 September, 2004; v1 submitted 7 June, 2004;
originally announced June 2004.
