-
Microstructural and material property changes in severely deformed Eurofer-97
Authors:
Kay Song,
Guanze He,
Abdallah Reza,
Tamas Ungár,
Phani Karamched,
David Yang,
Ivan Tolkachev,
Kenichiro Mizohata,
David E J Armstrong,
Felix Hofmann
Abstract:
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following H…
▽ More
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain structure of Eurofer-97, a ferritic/ martensitic steel. Electron microscopy and X-ray diffraction were used to characterise the microstructural changes. Following HPT, the average grain size reduced by a factor of $\sim$ 30, with a marked increase in high-angle grain boundaries. Dislocation density also increased by more than one order of magnitude. The thermal stability of the deformed material was investigated via in-situ annealing during synchrotron X-ray diffraction. This revealed substantial recovery between 450 K - 800 K. Irradiation with 20 MeV Fe-ions to $\sim$ 0.1 dpa caused a 20% reduction in dislocation density compared to the as-deformed material. However, HPT deformation prior to irradiation did not have a significant effect in mitigating the irradiation-induced reductions in thermal diffusivity and surface acoustic wave velocity of the material. These results provide a multi-faceted understanding of the changes in ferritic/martensitic steels due to severe plastic deformation, and how these changes can be used to alter material properties.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Dislocation density transients and saturation in irradiated zirconium
Authors:
Andrew R. Warwick,
Rhys Thomas,
Max Boleininger,
Ömer Koç,
Gyula Zilahi,
Gabor Ribárik,
Zoltan Hegedues,
Ulrich Lienert,
Tamas Ungar,
Chris Race,
Michael Preuss,
Philipp Frankel,
Sergei L. Dudarev
Abstract:
Zirconium alloys are widely used as the fuel cladding material in pressurised water reactors, accumulating a significant population of defects and dislocations from exposure to neutrons. We present and interpret synchrotron microbeam X-ray diffraction measurements of proton-irradiated Zircaloy-4, where we identify a transient peak and the subsequent saturation of dislocation density as a function…
▽ More
Zirconium alloys are widely used as the fuel cladding material in pressurised water reactors, accumulating a significant population of defects and dislocations from exposure to neutrons. We present and interpret synchrotron microbeam X-ray diffraction measurements of proton-irradiated Zircaloy-4, where we identify a transient peak and the subsequent saturation of dislocation density as a function of exposure. This is explained by direct atomistic simulations showing that the observed variation of dislocation density as a function of dose is a natural result of the evolution of the dense defect and dislocation microstructure driven by the concurrent generation of defects and their subsequent stress-driven relaxation. In the dynamic equilibrium state of the material developing in the high dose limit, the defect content distribution of the population of dislocation loops, coexisting with the dislocation network, follows a power law with exponent $α\approx 2.2$. This corresponds to the power law exponent of $β\approx 3.4$ for the distribution of loops as a function of their diameter that compares favourably with the experimentally measured values of $β$ in the range $ 3 \leq β\leq 4$.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Validating x-ray line-profile defect analysis using atomistic models of deformed material
Authors:
C P Race,
T Ungar,
G Ribarik
Abstract:
The population of dislocation defects in a crystalline material strongly influences its properties, so the ability to analyse this population in experimental samples is of great utility. As a complement to direct counting in the transmission electron microscope, quantitative analysis of x-ray diffraction line profiles is an important tool. This is an indirect approach to quantification and so requ…
▽ More
The population of dislocation defects in a crystalline material strongly influences its properties, so the ability to analyse this population in experimental samples is of great utility. As a complement to direct counting in the transmission electron microscope, quantitative analysis of x-ray diffraction line profiles is an important tool. This is an indirect approach to quantification and so requires careful validation of the physical models that underly the inferential process. Here we undertake to directly evaluate the ability of line profile analysis to quantify aspects of the dislocation and stacking fault populations by exploiting atomistic models of deformed copper single crystals. We directly analyse these models to determine exact details of the defect content (our "ground truth"). We then generate theoretical line profiles for the models and analyse them using the same procedures used in experimental analysis. This leads to inferred measures of the defect content which we are able to compare with the exact data. We show that line profile analysis is able to provide sound predictions of both dislocation density and stacking fault fraction across two orders of magnitude. We further show how the outer cut-off radius in the mean-square strain of a dislocation distribution invoked by Warren and Averbach corresponds to the cell size in an artificially constructed restrictedly-random distribution of dislocations according to the model of Wilkens. Overall, our results lend important new support to the use of line profile analysis for the quantification of line and planar defects in crystalline materials.
△ Less
Submitted 29 April, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Validation of x-ray line-profile analysis of extended defects in deformed crystals
Authors:
C P Race,
T Ungar,
G Ribarik
Abstract:
Quantitative measurements of extended defects in crystalline materials are important in understanding material behaviour. X-ray line profile analysis provides a complement to direct counting in the electron microscope, but is an indirect method and requires validation. Previous studies have focused on comparing x-ray analysis to electron microscopy results. Instead, we use simulated defective mate…
▽ More
Quantitative measurements of extended defects in crystalline materials are important in understanding material behaviour. X-ray line profile analysis provides a complement to direct counting in the electron microscope, but is an indirect method and requires validation. Previous studies have focused on comparing x-ray analysis to electron microscopy results. Instead, we use simulated defective material with known defect content and apply line profile analysis to calculated diffraction profiles to directly show that line profile analysis can reliably quantify dislocations and stacking faults.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Edge Dislocations Can Control Yield Strength in Refractory Body-Centered-Cubic High Entropy Alloys
Authors:
Francesco Maresca,
Chanho Lee,
Rui Feng,
Yi Chou,
Tamas Ungar,
Michael Widom,
Ke An,
John Poplawsky,
Yi-Chia Chou,
Peter Liaw,
William Curtin
Abstract:
Energy efficiency is motivating the search for new high-temperature metals. Some new body-centered-cubic random multicomponent "high entropy alloys (HEAs)" based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional strengths at high temperatures but the physical origins of this outstanding behavior are not known. Here we show, using integrated neutron-diffraction (ND), high-resolu…
▽ More
Energy efficiency is motivating the search for new high-temperature metals. Some new body-centered-cubic random multicomponent "high entropy alloys (HEAs)" based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional strengths at high temperatures but the physical origins of this outstanding behavior are not known. Here we show, using integrated neutron-diffraction (ND), high-resolution transmission electron microscopy (HRTEM), and theory, that the high strength and strength retention of a NbTaVTi alloy and a new high-strength/low-density CrMoNbV alloy are attributable to edge dislocations. This is surprising because plastic-flow in BCC elemental metals and dilute alloys is universally accepted to be controlled by screw dislocations. We use the insight and theory to perform a computationally-guided search over $10^7$ BCC HEAs and identify over $10^6$ possible ultra-strong high-temperature alloy compositions for future exploration.
△ Less
Submitted 26 August, 2020;
originally announced August 2020.
