The rise and sink dependence on the shape of a horizontally wiggling intruder
Authors:
Bitang Kwrung Tripura,
Sonu Kumar,
Vamsi Krishna Reddy Anyam,
K. Anki Reddy
Abstract:
We investigate the effect of shape and orientation for a horizontally oscillating intruder on its vertical dynamics in a granular medium via Discrete Element Method (DEM) simulations. Five distinct intruder shapes were considered in this study: a disk (OS1), a square (OS2), two rectangles with aspect ratio > 1 (OS3) and < 1 (OS4) respectively, and an equilateral triangle (OS5). The vertical veloci…
▽ More
We investigate the effect of shape and orientation for a horizontally oscillating intruder on its vertical dynamics in a granular medium via Discrete Element Method (DEM) simulations. Five distinct intruder shapes were considered in this study: a disk (OS1), a square (OS2), two rectangles with aspect ratio > 1 (OS3) and < 1 (OS4) respectively, and an equilateral triangle (OS5). The vertical velocity of the oscillating object was observed to be a function of amplitude and frequency (f) (inverse of time period (T)) of oscillation, and the shape of the object. The dynamics of the motion are modelled with the help of a cavity based model which can empirically produce the regimes observed by incorporating the free fall of the particles filling the cavity.The cavity based model assumes that there is a point on the surface of each oscillating object unique to its shape that any grain crossing it will irreversibly reach the bottom of the cavity. This leads to the creation of bed of particles at the bottom of the cavity which increases intruder's elevation as it oscillates, leading to its vertical rise in the granular medium. When an intruder oscillates much faster than the falling rate of the grains, the intruder cannot rise up and thus sinks due to energy provided by the oscillation to the bottom layer. On the contrary, if the intruder oscillates too slow, the cavity gets completely filled much before it returns. The maximum rise rate is thus observed at the oscillation time period where the cavity filling time is equal to the half time period of oscillation. In addition, we observed a minimum amplitude (Amin) below which the vertical position of the IO remains unaltered for various T. We have also presented the time-averaged pressure P, velocity V, and area fraction φ fields around the intruder shapes.
△ Less
Submitted 22 July, 2022; v1 submitted 3 July, 2022;
originally announced July 2022.
Role of shape on the forces on an intruder moving through a dense granular medium
Authors:
Bitang Kwrung Tripura,
Sonu Kumar,
K. Anki Reddy,
Julian Talbot
Abstract:
We use numerical simulation to investigate the effect an intruder's shape has on the drag and lift forces that it experiences while moving through a granular medium composed of polydisperse disks of mean diameter d. The intruder velocity,v, was varied from 0.1 \sqrt(dg) to 20 \sqrt(dg). For frictionless particles (μ= 0.0)there is a gradual increase in drag force with increasing v, whereas for fric…
▽ More
We use numerical simulation to investigate the effect an intruder's shape has on the drag and lift forces that it experiences while moving through a granular medium composed of polydisperse disks of mean diameter d. The intruder velocity,v, was varied from 0.1 \sqrt(dg) to 20 \sqrt(dg). For frictionless particles (μ= 0.0)there is a gradual increase in drag force with increasing v, whereas for frictional systems (μ= 0.1,0.5) a constant drag regime appears at low velocities. The drag force depends weakly on the shape of the object provided that the cross-section is same. The drag force depends linearly on the immersion depth, while there is very little variation in lift force with depth for certain shapes. The lift experienced by the object is a strong function of its shape at a given velocity. Shape has an effect on the distribution of contacts around the surface of the intruder which may result in a strong lift for certain shapes. We also show the force profiles around the intruder surface.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
