-
Boundary shape engineering for the spatial control of confined active particles
Authors:
Roberto Di Leonardo,
András Búzás,
Lóránd Kelemen,
Dávid Tóth,
Szilvia Tóth,
Pál Ormos,
Gaszton Vizsnyiczai
Abstract:
Unlike an equilibrium gas, the distribution of active particles can be very sensitive to what happens at the boundaries of their container. Experiments and simulations have previously highlighted the possibility of exploiting this behavior for the geometric control of active particles, although a general theoretical framework is lacking. Here we propose a boundary method based on the flux transfer…
▽ More
Unlike an equilibrium gas, the distribution of active particles can be very sensitive to what happens at the boundaries of their container. Experiments and simulations have previously highlighted the possibility of exploiting this behavior for the geometric control of active particles, although a general theoretical framework is lacking. Here we propose a boundary method based on the flux transfer formalism typical of radiometry problems, where surface elements transmit and receive "rays" of active particles with infinite persistence length. As in the case of blackbody radiation, a Lambert scattering law results in a uniform distribution of active particles within the cavity, while other scattering laws result in specific patterns of particle accumulation in the bulk or over the boundary walls. We validate our method's predictions with numerical simulations and demonstrate its practical utility by spatially controlling swimming microalgae confined in light-defined arenas. The presented boundary method offers a simple and efficient way to predict particle distributions when both the geometry of the boundaries and the scattering law are known. In addition, it provides a general design principle for engineering container shapes optimized for transport, accumulation, and sorting of self-propelled colloids and microorganisms.
△ Less
Submitted 2 October, 2024;
originally announced October 2024.
-
Nanoscale charge accumulation and its effect on carrier dynamics in tri-cation perovskite structures
Authors:
David Toth,
Bekele Hailegnaw,
Filipe Richheimer,
Sebastian Wood,
Fernando A. Castro,
Ferry Kienberger,
Markus C. Scharber,
Georg Gramse
Abstract:
Nanoscale investigations by scanning probe microscopy have provided major contributions to the rapid development of organic-inorganic halide perovskites (OIHP) as optoelectronic devices. Further improvement of device level properties requires a deeper understanding of the performance-limiting mechanisms such as ion migration, phase segregation and their effects on charge extraction both at the nan…
▽ More
Nanoscale investigations by scanning probe microscopy have provided major contributions to the rapid development of organic-inorganic halide perovskites (OIHP) as optoelectronic devices. Further improvement of device level properties requires a deeper understanding of the performance-limiting mechanisms such as ion migration, phase segregation and their effects on charge extraction both at the nano- and macroscale. Here, we have studied the dynamic electrical response of Cs0.05(FA0.83-MA0.17)0.95PbI3-xBrx perovskite structures by employing conventional and microsecond time-resolved Kelvin probe force microscopy (KPFM). Our results indicate strong negative charge carrier trapping upon illumination and very slow (>1s) relaxation of charges at the grain boundaries. The fast electronic recombination and transport dynamics on the microsecond scale probed by time-resolved KPFM show diffusion of charge carriers towards grain boundaries and indicate locally higher recombination rates due to intrinsic spatial heterogeneity. The nanoscale electrostatic effects revealed are summarized in a collective model for mixed-halide CsFAMA. Results on multilayer solar cell structures draw direct relations between nanoscale ionic transport, electron accumulation, recombination properties and the final device performance. Our findings extend the current understanding of complex charge carrier dynamics in stable multi-cation OIHP structures.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Nonreciprocity in microwave optomechanical circuits
Authors:
N. R. Bernier,
L. D. Tóth,
A. K. Feofanov,
T. J. Kippenberg
Abstract:
Nonreciprocal devices such as isolators and circulators are necessary to protect sensitive apparatus from unwanted noise. Recently, a variety of alternatives were proposed to replace ferrite-based commercial technologies, with the motivation to be integrated with microwave superconducting quantum circuits. Here, we review isolators realized with microwave optomechanical circuits and present a gyra…
▽ More
Nonreciprocal devices such as isolators and circulators are necessary to protect sensitive apparatus from unwanted noise. Recently, a variety of alternatives were proposed to replace ferrite-based commercial technologies, with the motivation to be integrated with microwave superconducting quantum circuits. Here, we review isolators realized with microwave optomechanical circuits and present a gyrator-based picture to develop an intuition on the origin of nonreciprocity in these systems. Such nonreciprocal optomechanical schemes show promise as they can be extended to circulators and directional amplifiers, with perspectives to reach the quantum limit in terms of added noise.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Level attraction in a microwave optomechanical circuit
Authors:
N. R. Bernier,
L. D. Tóth,
A. K. Feofanov,
T. J. Kippenberg
Abstract:
Level repulsion - the opening of a gap between two degenerate modes due to coupling - is ubiquitous anywhere from solid state theory to quantum chemistry. In contrast, if one mode has negative energy, the mode frequencies attract instead. They converge and develop imaginary components, leading to an instability; an exceptional point marks the transition. This, however, only occurs if the dissipati…
▽ More
Level repulsion - the opening of a gap between two degenerate modes due to coupling - is ubiquitous anywhere from solid state theory to quantum chemistry. In contrast, if one mode has negative energy, the mode frequencies attract instead. They converge and develop imaginary components, leading to an instability; an exceptional point marks the transition. This, however, only occurs if the dissipation rates of the two modes are comparable. Here we expose a theoretical framework for the general phenomenon and realize it experimentally through engineered dissipation in a multimode superconducting microwave optomechanical circuit. Level attraction is observed for a mechanical oscillator and a superconducting microwave cavity, while an auxiliary cavity is used for sideband cooling. Two exceptional points are demonstrated that could be exploited for their topological properties.
△ Less
Submitted 28 May, 2018; v1 submitted 7 September, 2017;
originally announced September 2017.
-
Quantum-limited directional amplifiers with optomechanics
Authors:
Daniel Malz,
László D. Tóth,
Nathan R. Bernier,
Alexey K. Feofanov,
Tobias J. Kippenberg,
Andreas Nunnenkamp
Abstract:
Directional amplifiers are an important resource in quantum information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave signals in an electromechanical setup comprising two microwave cavities and two mechanical resonators. We show that both can reach their respec…
▽ More
Directional amplifiers are an important resource in quantum information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave signals in an electromechanical setup comprising two microwave cavities and two mechanical resonators. We show that both can reach their respective quantum limits on added noise. In the reverse direction, they emit thermal noise stemming from the mechanical resonators and we discuss how this noise can be suppressed, a crucial aspect for technological applications. The isolation bandwidth in both is of the order of the mechanical linewidth divided by the amplitude gain. We derive the bandwidth and gain-bandwidth product for both and find that the phase-sensitive amplifier has an unlimited gain-bandwidth product. Our study represents an important step toward flexible, on-chip integrated nonreciprocal amplifiers of microwave signals.
△ Less
Submitted 6 December, 2017; v1 submitted 1 May, 2017;
originally announced May 2017.
-
Nonreciprocal reconfigurable microwave optomechanical circuit
Authors:
N. R. Bernier,
L. D. Tóth,
A. Koottandavida,
M. Ioannou,
D. Malz,
A. Nunnenkamp,
A. K. Feofanov,
T. J. Kippenberg
Abstract:
Devices that achieve nonreciprocal microwave transmission are ubiquitous in radar and radio-frequency communication systems, and commonly rely on magnetically biased ferrite materials. Such devices are also indispensable in the readout chains of superconducting quantum circuits as they protect sensitive quantum systems from the noise emitted by readout electronics. Since ferrite-based nonreciproca…
▽ More
Devices that achieve nonreciprocal microwave transmission are ubiquitous in radar and radio-frequency communication systems, and commonly rely on magnetically biased ferrite materials. Such devices are also indispensable in the readout chains of superconducting quantum circuits as they protect sensitive quantum systems from the noise emitted by readout electronics. Since ferrite-based nonreciprocal devices are bulky, lossy, and require large magnetic fields, there has been significant interest in magnetic-field-free on-chip alternatives, such as those recently implemented using Josephson junctions. Here we realise reconfigurable nonreciprocal transmission between two microwave modes using purely optomechanical interactions in a superconducting electromechanical circuit. We analyse the transmission as well as the noise properties of this nonreciprocal circuit. The scheme relies on the interference in two mechanical modes that mediate coupling between microwave cavities. Finally, we show how quantum-limited circulators can be realized with the same principle. The technology can be built on-chip without any external magnetic field, and is hence fully compatible with superconducting quantum circuits. All-optomechanically-mediated nonreciprocity demonstrated here can also be extended to implement directional amplifiers, and it forms the basis towards realising topological states of light and sound.
△ Less
Submitted 1 June, 2017; v1 submitted 24 December, 2016;
originally announced December 2016.
-
A dissipative quantum reservoir for microwave light using a mechanical oscillator
Authors:
L. D. Tóth,
N. R. Bernier,
A. Nunnenkamp,
A. K. Feofanov,
T. J. Kippenberg
Abstract:
Isolation of a system from its environment is often desirable, from precision measurements to control of individual quantum systems; however, dissipation can also be a useful resource. Remarkably, engineered dissipation enables the preparation of quantum states of atoms, ions or superconducting qubits as well as their stabilization. This is achieved by a suitably engineered coupling to a dissipati…
▽ More
Isolation of a system from its environment is often desirable, from precision measurements to control of individual quantum systems; however, dissipation can also be a useful resource. Remarkably, engineered dissipation enables the preparation of quantum states of atoms, ions or superconducting qubits as well as their stabilization. This is achieved by a suitably engineered coupling to a dissipative cold reservoir formed by electromagnetic modes. Similarly, in the field of cavity electro- and optomechanics, the control over mechanical oscillators utilizes the inherently cold, dissipative nature of the electromagnetic degree of freedom. Breaking from this paradigm, recent theoretical work has considered the opposite regime in which the dissipation of the mechanical oscillator dominates and provides a cold, dissipative reservoir to an electromagnetic mode. Here we realize this reversed dissipation regime in a microwave cavity optomechanical system and realize a quasi-instantaneous, cold reservoir for microwave light. Coupling to this reservoir enables to manipulate the susceptibility of the microwave cavity, corresponding to dynamical backaction control of the microwave field. Additionally, we observe the onset of parametric instability, i.e. the stimulated emission of microwaves (masing). Equally important, the reservoir can function as a useful quantum resource. We evidence this by employing the engineered cold reservoir to implement a large gain (above 40 dB) phase preserving microwave amplifier that operates 0.87 quanta above the limit of added noise imposed by quantum mechanics. Such a dissipative cold reservoir forms the basis of microwave entanglement schemes, the study of dissipative quantum phase transitions, amplifiers with unlimited gain-bandwidth product and non-reciprocal devices, thereby extending the available toolbox of quantum-limited microwave manipulation techniques.
△ Less
Submitted 20 September, 2016; v1 submitted 16 February, 2016;
originally announced February 2016.
-
A Test of a New Interacting N-Body Wave Function
Authors:
Martin Dunn,
W. Blake Laing,
Derrick Toth,
Deborah K. Watson
Abstract:
The resources required to solve the general interacting quantum N-body problem scale exponentially with N, making the solution of this problem very difficult when N is large. In a previous series of papers we develop an approach for a fully-interacting wave function with a general two-body interaction which tames the N-scaling by developing a perturbation series that is order-by-order invariant…
▽ More
The resources required to solve the general interacting quantum N-body problem scale exponentially with N, making the solution of this problem very difficult when N is large. In a previous series of papers we develop an approach for a fully-interacting wave function with a general two-body interaction which tames the N-scaling by developing a perturbation series that is order-by-order invariant under a point group isomorphic with S_N . Group theory and graphical techniques are then used to solve for the wave function exactly and analytically at each order. Recently this formalism has been used to obtain the first-order, fully-interacting wave function for a system of harmonically-confined bosons interacting harmonically. In this paper, we report the first application of this N-body wave function to a system of N fully-interacting bosons in three dimensions. We determine the density profile for a confined system of harmonically-interacting bosons. Choosing this simple interaction is not necessary or even advantageous for our method, however this choice allows a direct comparison of our exact results through first order with exact results obtained in an independent solution. Our density profile through first-order in three dimensions is indistinguishable from the first-order exact result obtained independently and shows strong convergence to the exact result to all orders.
△ Less
Submitted 4 March, 2009;
originally announced March 2009.
