-
Reversing quantum trajectories with analog feedback
Authors:
G. de Lange,
D. Ristè,
M. J. Tiggelman,
C. Eichler,
L. Tornberg,
G. Johansson,
A. Wallraff,
R. N. Schouten,
L. DiCarlo
Abstract:
We demonstrate the active suppression of transmon qubit dephasing induced by dispersive measurement, using parametric amplification and analog feedback. By real-time processing of the homodyne record, the feedback controller reverts the stochastic quantum phase kick imparted by the measurement on the qubit. The feedback operation matches a model of quantum trajectories with measurement efficiency…
▽ More
We demonstrate the active suppression of transmon qubit dephasing induced by dispersive measurement, using parametric amplification and analog feedback. By real-time processing of the homodyne record, the feedback controller reverts the stochastic quantum phase kick imparted by the measurement on the qubit. The feedback operation matches a model of quantum trajectories with measurement efficiency $\tildeη \approx 0.5$, consistent with the result obtained by postselection. We overcome the bandwidth limitations of the amplification chain by numerically optimizing the signal processing in the feedback loop and provide a theoretical model explaining the optimization result.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
Quantum nondemolition detection of a propagating microwave photon
Authors:
Sankar R. Sathyamoorthy,
L. Tornberg,
Anton F. Kockum,
Ben Q. Baragiola,
Joshua Combes,
C. M. Wilson,
Thomas M. Stace,
G. Johansson
Abstract:
The ability to nondestructively detect the presence of a single, traveling photon has been a long-standing goal in optics, with applications in quantum information and measurement. Realising such a detector is complicated by the fact that photon-photon interactions are typically very weak. At microwave frequencies, very strong effective photon-photon interactions in a waveguide have recently been…
▽ More
The ability to nondestructively detect the presence of a single, traveling photon has been a long-standing goal in optics, with applications in quantum information and measurement. Realising such a detector is complicated by the fact that photon-photon interactions are typically very weak. At microwave frequencies, very strong effective photon-photon interactions in a waveguide have recently been demonstrated. Here we show how this type of interaction can be used to realize a quantum nondemolition measurement of a single propagating microwave photon. The scheme we propose uses a chain of solid-state 3-level systems (transmons), cascaded through circulators which suppress photon backscattering. Our theoretical analysis shows that microwave-photon detection with fidelity around 90% can be realized with existing technologies.
△ Less
Submitted 19 December, 2013; v1 submitted 9 August, 2013;
originally announced August 2013.
-
Partial-measurement back-action and non-classical weak values in a superconducting circuit
Authors:
J. P. Groen,
D. Ristè,
L. Tornberg,
J. Cramer,
P. C. de Groot,
T. Picot,
G. Johansson,
L. DiCarlo
Abstract:
We realize indirect partial measurement of a transmon qubit in circuit quantum electrodynamics by interaction with an ancilla qubit and projective ancilla measurement with a dedicated readout resonator. Accurate control of the interaction and ancilla measurement basis allows tailoring the measurement strength and operator. The tradeoff between measurement strength and qubit back-action is characte…
▽ More
We realize indirect partial measurement of a transmon qubit in circuit quantum electrodynamics by interaction with an ancilla qubit and projective ancilla measurement with a dedicated readout resonator. Accurate control of the interaction and ancilla measurement basis allows tailoring the measurement strength and operator. The tradeoff between measurement strength and qubit back-action is characterized through the distortion of a qubit Rabi oscillation imposed by ancilla measurement in different bases. Combining partial and projective qubit measurements, we provide the solid-state demonstration of the correspondence between a non-classical weak value and the violation of a Leggett-Garg inequality.
△ Less
Submitted 20 February, 2013;
originally announced February 2013.
-
Undoing measurement-induced dephasing in circuit QED
Authors:
A. Frisk Kockum,
L. Tornberg,
G. Johansson
Abstract:
We analyze the backaction of homodyne detection and photodetection on superconducting qubits in circuit quantum electrodynamics. Although both measurement schemes give rise to backaction in the form of stochastic phase rotations, which leads to dephasing, we show that this can be perfectly undone provided that the measurement signal is fully accounted for. This result improves upon that of Phys. R…
▽ More
We analyze the backaction of homodyne detection and photodetection on superconducting qubits in circuit quantum electrodynamics. Although both measurement schemes give rise to backaction in the form of stochastic phase rotations, which leads to dephasing, we show that this can be perfectly undone provided that the measurement signal is fully accounted for. This result improves upon that of Phys. Rev. A, 82, 012329 (2010), showing that the method suggested can be made to realize a perfect two-qubit parity measurement. We propose a benchmarking experiment on a single qubit to demonstrate the method using homodyne detection. By analyzing the limited measurement efficiency of the detector and bandwidth of the amplifier, we show that the parameter values necessary to see the effect are within the limits of existing technology.
△ Less
Submitted 23 February, 2012; v1 submitted 10 February, 2012;
originally announced February 2012.
-
High fidelity feed-back assisted parity measurement in circuit QED
Authors:
L. Tornberg,
Göran Johansson
Abstract:
We analyze a two qubit parity measurement based on dispersive read-out in circuit quantum electrodynamics. The back-action on the qubits has two qualitatively different contributions. One is an unavoidable dephasing in one of the parity subspaces, arising during the transient time of switching on the measurement. The other part is a stochastic rotation of the phase in the same subspace, which pers…
▽ More
We analyze a two qubit parity measurement based on dispersive read-out in circuit quantum electrodynamics. The back-action on the qubits has two qualitatively different contributions. One is an unavoidable dephasing in one of the parity subspaces, arising during the transient time of switching on the measurement. The other part is a stochastic rotation of the phase in the same subspace, which persists during the whole measurement. The latter can be determined from the full measurement record, using the method of state estimation. Our main result is that the outcome of this phase determination process is {\em independent} of the initial state in the state estimation procedure. The procedure can thus be used in a measurement situation, where the initial state is unknown. We discuss how this feed-back method can be used to achieve a high fidelity parity measurement for realistic values of the cavity-qubit coupling strength. Finally, we discuss the robustness of the feed-back procedure towards errors in the measurement record.
△ Less
Submitted 29 March, 2010;
originally announced March 2010.
-
Proposal for generating and detecting multi-qubit GHZ states in circuit QED
Authors:
Lev S. Bishop,
L. Tornberg,
D. Price,
E. Ginossar,
A. Nunnenkamp,
A. A. Houck,
J. M. Gambetta,
Jens Koch,
G. Johansson,
S. M. Girvin,
R. J. Schoelkopf
Abstract:
We propose methods for the preparation and entanglement detection of multi-qubit GHZ states in circuit quantum electrodynamics. Using quantum trajectory simulations appropriate for the situation of a weak continuous measurement, we show that the joint dispersive readout of several qubits can be utilized for the probabilistic production of high-fidelity GHZ states. When employing a nonlinear filt…
▽ More
We propose methods for the preparation and entanglement detection of multi-qubit GHZ states in circuit quantum electrodynamics. Using quantum trajectory simulations appropriate for the situation of a weak continuous measurement, we show that the joint dispersive readout of several qubits can be utilized for the probabilistic production of high-fidelity GHZ states. When employing a nonlinear filter on the recorded homodyne signal, the selected states are found to exhibit values of the Bell-Mermin operator exceeding 2 under realistic conditions. We discuss the potential of the dispersive readout to demonstrate a violation of the Mermin bound, and present a measurement scheme avoiding the necessity for full detector tomography.
△ Less
Submitted 2 February, 2009;
originally announced February 2009.
-
Randomized benchmarking and process tomography for gate errors in a solid-state qubit
Authors:
J. M. Chow,
J. M. Gambetta,
L. Tornberg,
Jens Koch,
Lev S. Bishop,
A. A. Houck,
B. R. Johnson,
L. Frunzio,
S. M. Girvin,
R. J. Schoelkopf
Abstract:
We present measurements of single-qubit gate errors for a superconducting qubit. Results from quantum process tomography and randomized benchmarking are compared with gate errors obtained from a double pi pulse experiment. Randomized benchmarking reveals a minimum average gate error of 1.1+/-0.3% and a simple exponential dependence of fidelity on the number of gates. It shows that the limits on…
▽ More
We present measurements of single-qubit gate errors for a superconducting qubit. Results from quantum process tomography and randomized benchmarking are compared with gate errors obtained from a double pi pulse experiment. Randomized benchmarking reveals a minimum average gate error of 1.1+/-0.3% and a simple exponential dependence of fidelity on the number of gates. It shows that the limits on gate fidelity are primarily imposed by qubit decoherence, in agreement with theory.
△ Less
Submitted 26 November, 2008;
originally announced November 2008.
-
Implementation of the three-qubit phase-flip error correction code with superconducting qubits
Authors:
L. Tornberg,
M. Wallquist,
G. Johansson,
V. S. Shumeiko,
G. Wendin
Abstract:
We investigate the performance of a three qubit error correcting code in the framework of superconducting qubit implementations. Such a code can recover a quantum state perfectly in the case of dephasing errors but only in situations where the dephasing rate is low. Numerical studies in previous work have however shown that the code does increase the fidelity of the encoded state even in the pre…
▽ More
We investigate the performance of a three qubit error correcting code in the framework of superconducting qubit implementations. Such a code can recover a quantum state perfectly in the case of dephasing errors but only in situations where the dephasing rate is low. Numerical studies in previous work have however shown that the code does increase the fidelity of the encoded state even in the presence of high error probability, during both storage and processing. In this work we give analytical expressions for the fidelity of such a code. We consider two specific schemes for qubit-qubit interaction realizable in superconducting systems; one $σ_zσ_z$-coupling and one cavity mediated coupling. With these realizations in mind, and considering errors during storing as well as processing, we calculate the maximum operation time allowed in order to still benefit from the code. We show that this limit can be reached with current technology.
△ Less
Submitted 12 March, 2008;
originally announced March 2008.
-
Dispersive Charge and Flux Qubit Readout as a Quantum Measurement Process
Authors:
L. Tornberg,
G. Johansson
Abstract:
We analyze the dispersive readout of superconducting charge and flux qubits as a quantum measurement process. The measurement oscillator frequency is considered much lower than the qubit frequency. This regime is interesting because large detuning allows for strong coupling between the measurement oscillator and the signal transmission line, thus allowing for fast readout. Due to the large detun…
▽ More
We analyze the dispersive readout of superconducting charge and flux qubits as a quantum measurement process. The measurement oscillator frequency is considered much lower than the qubit frequency. This regime is interesting because large detuning allows for strong coupling between the measurement oscillator and the signal transmission line, thus allowing for fast readout. Due to the large detuning we may not use the rotating wave approximation in the oscillator-qubit coupling. Instead we start from an approximation where the qubit follows the oscillator adiabatically, and show that non-adiabatic corrections are small. We find analytic expressions for the measurement time, as well as for the back-action, both while measuring and in the off-state. The quantum efficiency is found to be unity within our approximation, both for charge and flux qubit readout.
△ Less
Submitted 26 October, 2006;
originally announced October 2006.
-
Readout methods and devices for Josephson-junction-based solid-state qubits
Authors:
G. Johansson,
L. Tornberg,
V. S. Shumeiko,
G. Wendin
Abstract:
We discuss the current situation concerning measurement and readout of Josephson-junction based qubits. In particular we focus attention of dispersive low-dissipation techniques involving reflection of radiation from an oscillator circuit coupled to a qubit, allowing single-shot determination of the state of the qubit. In particular we develop a formalism describing a charge qubit read out by me…
▽ More
We discuss the current situation concerning measurement and readout of Josephson-junction based qubits. In particular we focus attention of dispersive low-dissipation techniques involving reflection of radiation from an oscillator circuit coupled to a qubit, allowing single-shot determination of the state of the qubit. In particular we develop a formalism describing a charge qubit read out by measuring its effective (quantum) capacitance. To exemplify, we also give explicit formulas for the readout time.
△ Less
Submitted 24 February, 2006;
originally announced February 2006.
-
Fast quantum limited read-out of a superconducting qubit using a slow oscillator
Authors:
G. Johansson,
L. Tornberg,
C. M. Wilson
Abstract:
We describe how to perform fast quantum limited read-out of a solid state qubit biased at its degeneracy point. The method is based on homodyne detection of the phase of a microwave signal reflected by a slow oscillator coupled to the qubit. Analyzing the whole quantum read-out process, we find that the detection is indeed quantum limited and that this limit may be reached even using a resonance…
▽ More
We describe how to perform fast quantum limited read-out of a solid state qubit biased at its degeneracy point. The method is based on homodyne detection of the phase of a microwave signal reflected by a slow oscillator coupled to the qubit. Analyzing the whole quantum read-out process, we find that the detection is indeed quantum limited and that this limit may be reached even using a resonance circuit with a low quality factor, thus enabling the use of short measurement pulses. As an example, we discuss in detail the read-out of a Cooper-pair box capacitively coupled to a lumped element LC-oscillator. Furthermore, we give formulas for the backaction while not measuring, and discuss optimal parameters for a realistic design capable of fast (~50 ns) single-shot read-out.
△ Less
Submitted 26 October, 2006; v1 submitted 24 February, 2006;
originally announced February 2006.
