-
Infrared thermochromic antenna composite for self-adaptive thermoregulation
Authors:
Francisco V. Ramirez-Cuevas,
Kargal L. Gurunatha,
Lingxi Li,
Usama Zulfiqar,
Sanjayan Sathasivam,
Manish K. Tiwari,
Ivan P. Parkin,
Ioannis Papakonstantinou
Abstract:
Self-adaptive thermoregulation, the mechanism living organisms use to balance their temperature, holds great promise for decarbonizing cooling and heating processes. The functionality can be effectively emulated by engineering the thermal emissivity of materials to adapt to background temperature variations. Yet, solutions that marry large emissivity switching ($Δε$) with scalability, cost-effecti…
▽ More
Self-adaptive thermoregulation, the mechanism living organisms use to balance their temperature, holds great promise for decarbonizing cooling and heating processes. The functionality can be effectively emulated by engineering the thermal emissivity of materials to adapt to background temperature variations. Yet, solutions that marry large emissivity switching ($Δε$) with scalability, cost-effectiveness and design freedom are still lacking. Here, we fill this gap by introducing infrared dipole antennas made of tunable thermochromic materials. We demonstrate that non-spherical antennas (rods, stars and flakes) made of vanadium-dioxide can exhibit a massive (~200-fold) increase in their absorption cross-section as temperature rises. Embedding these antennas in polymer films, or simply spraying them directly, creates free-form thermoregulation composites, featuring an outstanding $Δε\sim0.6$ in spectral ranges that can be tuned at will. Our research paves the way for versatile self-adaptive heat management solutions (coatings, fibers, membranes and films) that could find application in radiative-cooling, heat-sensing, thermal-camouflage, and other.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Atmospheric water vapor condensation on engineered interfaces: Busting the myths
Authors:
Tibin M. Thomas,
Pallab Sinha Mahapatra,
Ranjan Ganguly,
Manish K. Tiwari
Abstract:
Condensing atmospheric water vapor on surfaces is a sustainable approach to potentially address the potable water crisis. However, despite extensive research, a key question remains: what is the physical mechanism governing the condensation from humid air and how significantly does it differ from pure steam condensation? The answer may help define an optimal combination of the mode and mechanism o…
▽ More
Condensing atmospheric water vapor on surfaces is a sustainable approach to potentially address the potable water crisis. However, despite extensive research, a key question remains: what is the physical mechanism governing the condensation from humid air and how significantly does it differ from pure steam condensation? The answer may help define an optimal combination of the mode and mechanism of condensation as well as the surface wettability for best possible water harvesting efficacy. Here we show that this lack of clarity is due to the differences in heat transfer characteristics during condensation from pure vapor and humid air environments. Specifically, during condensation from humid air, the thermal resistance across the condensate is non-dominant and the energy transfer is controlled by vapor diffusion and condensate drainage. This leads to filmwise condensation on superhydrophilic surfaces, offering the highest water collection efficiency. To demonstrate this, we measured condensation rate on different sets of superhydrophilic and superhydrophobic surfaces in a wide degree of subcooling (10 - 26 C) and humidity-ratio differences (5 - 45 g/kg of dry air). The resulting condensation rate is enhanced by 57 - 333 % on the superhydrophilic surfaces as compared to the superhydrophobic ones. The findings of this study challenges the nearly century-old scientific ambiguity about the mechanism of vapor condensation from humid air. Our findings will lead to the design of efficient atmospheric water harvesting systems.
△ Less
Submitted 21 March, 2023; v1 submitted 15 October, 2022;
originally announced October 2022.
-
Structural investigation of Ayurveda Lauha (Iron) Bhasma
Authors:
M. K. Tiwari,
Arjun Singh,
Ajay Khooha,
U K Goutam
Abstract:
In Ayurveda, Lauha (Iron) bhasma is primarily used to cure diseases related with iron deficiency in humans. It is produced from purified raw metallic iron using a combination of multi-step traditional preparation processes described in the Ayurveda literature. Here, we present results of structural investigation performed on the medicinal grade Lauha bhasma using various X-ray based techniques. Ou…
▽ More
In Ayurveda, Lauha (Iron) bhasma is primarily used to cure diseases related with iron deficiency in humans. It is produced from purified raw metallic iron using a combination of multi-step traditional preparation processes described in the Ayurveda literature. Here, we present results of structural investigation performed on the medicinal grade Lauha bhasma using various X-ray based techniques. Our results indicate that after several rounds of heating and cooling in specific conditions following the Ayurvedic preparation procedure, metallic iron eventually converts to a natural iron-oxide mineral belonging to the Magnetite group. Scanning electron microscopy (SEM) and X-ray standing wave assisted fluorescence measurements carried out on powdered bhasma specimen reveal that the Magnetite micro-particles in the bhasma specimen are usually present in the form of agglomerates of nano-particles. We anticipate that the Ayurvedic Lauha Bhasma has great potential for noninvasive localized target killing of cancer cells, particularly in sensitive parts of the human body such as brain, spinal cord, and lungs, via necrosis by application of an alternating external magnetic field or photo electron generation through X-rays.
△ Less
Submitted 25 January, 2023; v1 submitted 29 July, 2022;
originally announced July 2022.
-
Labeling elemental detection sensitivities in part per billion range using conventional geometry synchrotron assisted EDXRF measurements
Authors:
Md. Akhlak Alam,
M. K. Tiwari,
Ayushi Trivedi,
Ajay Khooha,
A. K. Singh
Abstract:
Energy dispersive X-ray fluorescence (EDXRF) is a widely used non-destructive technique for micro and trace multi-element analysis of materials. Conventional trials show that using laboratory assisted EDXRF measurements, one can obtain elemental detection limits in the range of μg/g to sub-μg/g level. In the present work a quantitative approach has been followed in attempting to explore how is it…
▽ More
Energy dispersive X-ray fluorescence (EDXRF) is a widely used non-destructive technique for micro and trace multi-element analysis of materials. Conventional trials show that using laboratory assisted EDXRF measurements, one can obtain elemental detection limits in the range of μg/g to sub-μg/g level. In the present work a quantitative approach has been followed in attempting to explore how is it possible to obtain elemental detection limit in the range of ng/g by using simple EDXRF excitation (45°- 45° geometry) instead of using total reflection X-ray fluorescence (TXRF) technique, which renders relatively superior detection limits for different elements. In order to accomplish this, we recorded fluorescence spectrum from a standard reference sample (ICP-IV) in similar experimental conditions. The results show that using a very small quantity of sample on top of a thin kapton foil with a thickness ranging between 25-50 μm, as a sample carrier, the EDXRF technique may offer comparable elemental detection limits in contrast to TXRF technique.
△ Less
Submitted 5 November, 2021;
originally announced November 2021.
-
Interface Sharpening in Miscible and Isotopic Multilayers: Role of Short-Circuit Diffusion
Authors:
Atul Tiwari,
M. K. Tiwari,
Mukul Gupta,
H. -C. Wille,
Ajay Gupta
Abstract:
Atomic diffusion at nanometer length scale may differ significantly from bulk diffusion, and may sometimes even exhibit counterintuitive behavior. In the present work, taking Cu/Ni as a model system, a general phenomenon is reported which results in sharpening of interfaces upon thermal annealing, even in miscible systems. Anomalous x-ray reflectivity from a Cu/Ni multilayer has been used to study…
▽ More
Atomic diffusion at nanometer length scale may differ significantly from bulk diffusion, and may sometimes even exhibit counterintuitive behavior. In the present work, taking Cu/Ni as a model system, a general phenomenon is reported which results in sharpening of interfaces upon thermal annealing, even in miscible systems. Anomalous x-ray reflectivity from a Cu/Ni multilayer has been used to study the evolution of interfaces with thermal annealing. Annealing at 423 K results in sharpening of interfaces by about 38%. This is the temperature at which no asymmetry exists in the inter-diffusivities of Ni and Cu. Thus, the effect is very general in nature, and is different from the one reported in the literature, which requires a large asymmetry in the diffusivities of the two constituents [Z. Erdélyi et al., Science 306, 1913 (2004).]. General nature of the effect is conclusively demonstrated using isotopic multilayers of 57Fe/naturalFe, in which evolution of isotopic interfaces has been observed using nuclear resonance reflectivity. It is found that annealing at suitably low temperature (e.g. 523 K) results in sharpening of the isotopic interfaces. Since chemically it is a single Fe layer, any effect associated with concentration dependent diffusivity can be ruled out. The results can be understood in terms of fast diffusion along short-circuit paths like triple junctions, which results in an effective sharpening of the interfaces at relatively low temperatures.
△ Less
Submitted 6 March, 2019; v1 submitted 16 September, 2018;
originally announced September 2018.
-
Fabrication and characterization of Er,Ndcodoped Y2O3 Transparent Ceramic: A dual mode Photo-luminescence emitter
Authors:
Pratik Deshmukh,
S. Satapathy,
Anju Ahlawat,
M K Tiwari,
A. K. Karnal
Abstract:
The transparent Er, Nd co-doped Yttria ceramics with transparency around 78 percentage (in 500 - 2000 nm range without Fresnels correction) were fabricated successfully. It involved nanoparticle synthesis by coprecipitation method and sintering of pellets under high vacuum condition. The crystalline phase, particle size and element composition were confirmed by X- ray diffraction, scanning electro…
▽ More
The transparent Er, Nd co-doped Yttria ceramics with transparency around 78 percentage (in 500 - 2000 nm range without Fresnels correction) were fabricated successfully. It involved nanoparticle synthesis by coprecipitation method and sintering of pellets under high vacuum condition. The crystalline phase, particle size and element composition were confirmed by X- ray diffraction, scanning electron microscope, energy dispersive X- ray fluorescence techniques, respectively. The upconversion luminescence mechanisms involving energy transfer and non-radiative relaxation were analyzed. It is expected that, the result evolved from this study will provide better understanding of upconversion mechanism involved in Er, Nd codoped host material. The emission at both 563 nm and 1064 nm on 822 nm excitation proves potential of the ceramic material for dual mode efficient emitter.
△ Less
Submitted 14 January, 2018;
originally announced January 2018.
-
Depth resolved chemical speciation of a superlattice structure
Authors:
Gangadhar Das,
A. G. Karydas,
Haranath Ghosh,
M. Czyzycki,
A. Migliori,
A. K. Sinha,
M. K. Tiwari
Abstract:
We report results of simultaneous x-ray reflectivity and grazing incidence x-ray fluorescence measurements in combination with x-ray standing wave assisted depth resolved near edge x-ray absorption measurements to reveal new insights on chemical speciation of W in a W-B4C superlattice structure. Interestingly, our results show existence of various unusual electronic states for the W atoms especial…
▽ More
We report results of simultaneous x-ray reflectivity and grazing incidence x-ray fluorescence measurements in combination with x-ray standing wave assisted depth resolved near edge x-ray absorption measurements to reveal new insights on chemical speciation of W in a W-B4C superlattice structure. Interestingly, our results show existence of various unusual electronic states for the W atoms especially those sitting at the surface and interface boundary of a thin film medium as compared to that of the bulk. These observations are found to be consistent with the results obtained using first principles calculations. Unlike the conventional x-ray absorption measurements the present approach has an advantage that it permits the determination of depth resolved chemical nature of an element in the thin layered materials at atomic length scale resolutions.
△ Less
Submitted 11 May, 2017;
originally announced May 2017.
-
Determination of Surface Morphology of TiO2 nanostructure using synchrotron X-ray standing wave technique
Authors:
Gangadhar Das,
Manoj Kumar,
A. K. Biswas,
Ajay Khooha,
Puspen Mondal,
M. K. Tiwari
Abstract:
Nanostructures of Titanium oxide (TiO2) are being studied for many promising applications, e.g., solar photovoltaics, solar water splitting for H2 fuel generation etc., due to their excellent photo-catalytic properties. We have synthesized low-dimensional TiO2 nanoparticles by gas phase CW CO2 laser pyrolysis. The laser synthesis process has been optimized for the deposition of highly pure, nearly…
▽ More
Nanostructures of Titanium oxide (TiO2) are being studied for many promising applications, e.g., solar photovoltaics, solar water splitting for H2 fuel generation etc., due to their excellent photo-catalytic properties. We have synthesized low-dimensional TiO2 nanoparticles by gas phase CW CO2 laser pyrolysis. The laser synthesis process has been optimized for the deposition of highly pure, nearly mono-dispersed TiO2 nanoparticles on silicon substrates. Hard x-ray standing wave-field (XSW) measurements in total reflection geometry were carried out on the BL-16 beamline of Indus-2 synchrotron radiation facility in combination with x-ray reflectivity and grazing incidence x-ray fluorescence measurements for the determination of surface morphology of the deposited TiO2 nanostructures. The average particle size of TiO2 nanostructure estimated using transmission electron microscopy (TEM) was found to closely agree with the XSW and grazing incidence x-ray diffraction (GIXRD) results.
△ Less
Submitted 29 September, 2016;
originally announced September 2016.
-
Temporal Coherence in Surface x-ray Standing Waves
Authors:
M K Tiwari,
Gangadhar Das
Abstract:
We present a unified elucidation for the role temporal coherence properties of x-rays in surface x-ray standing wave analysis, under total external reflection condition. Analytical formulas have been derived that provide a direct relation between the intensity distribution of x-ray standing wave (XSW) pattern and complex degree of coherence of the incoming x-rays. The novelty of the proposed metho…
▽ More
We present a unified elucidation for the role temporal coherence properties of x-rays in surface x-ray standing wave analysis, under total external reflection condition. Analytical formulas have been derived that provide a direct relation between the intensity distribution of x-ray standing wave (XSW) pattern and complex degree of coherence of the incoming x-rays. The novelty of the proposed method has been demonstrated experimentally together with the theoretical results for a real application by analyzing the distribution of metal nanoparticles on a Si mirror surface. Our results demonstrate that the modified XSW approach opens up an opportunity to unambiguously interpret structural studies of large dimension nanostructure materials of height 200nm (or more), deposited on a substrate surface.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Effect of Synchrotron Polarization in Grazing Incidence X-ray Fluorescence analysis
Authors:
Gangadhar Das,
M K Tiwari,
A K Singh,
Haranath Ghosh
Abstract:
Total reflection x-ray fluorescence (TXRF) spectroscopy has seen a remarkable progress over the past years. Numerous applications in basic and applied sciences prove its importance. The large spectral background which is a major detrimental factor in the conventional x-ray fluorescence technique, limits the element detection sensitivities of the technique to ppm range. This spectral background red…
▽ More
Total reflection x-ray fluorescence (TXRF) spectroscopy has seen a remarkable progress over the past years. Numerous applications in basic and applied sciences prove its importance. The large spectral background which is a major detrimental factor in the conventional x-ray fluorescence technique, limits the element detection sensitivities of the technique to ppm range. This spectral background reduces to a great extent in the TXRF technique due to the low extinction depth of the primary incident x-ray beam. In synchrotron radiation (SR) based TXRF measurements the spectral background reduces further because of the polarization of the synchrotron x-ray beam. Here, we discuss in detail the influence of synchrotron polarization on the spectral background in a fluorescence spectrum and its significance towards TXRF detection sensitivities. We provide a detailed theoretical description and show that how anisotropic scattering probability densities of the Compton and Elastic scattered x-rays depend on the scattering angle (θ) and azimuthal angle (φ) in the polarization plane of the SR beam.
△ Less
Submitted 20 May, 2014;
originally announced May 2014.
-
Surface and interface study of pulsed-laser-deposited off-stoichiometric NiMnSb thin films on Si(100) substrate
Authors:
S. Rai,
M. K. Tiwari,
G. S. Lodha,
M. H. Modi,
M. K. Chattopadhyay,
S. Majumdar,
S. Gardelis,
Z. Viskadourakis,
J. Giapintzakis,
R. V. Nandedkar,
S. B. Roy,
P. Chaddah
Abstract:
We report a detailed study of surface and interface properties of pulsed-laser deposited NiMnSb films on Si (100) substrate as a function of film thickness. As the thickness of films is reduced below 35 nm formation of a porous layer is observed. Porosity in this layer increases with decrease in NiMnSb film thickness. These morphological changes of the ultra thin films are reflected in the inter…
▽ More
We report a detailed study of surface and interface properties of pulsed-laser deposited NiMnSb films on Si (100) substrate as a function of film thickness. As the thickness of films is reduced below 35 nm formation of a porous layer is observed. Porosity in this layer increases with decrease in NiMnSb film thickness. These morphological changes of the ultra thin films are reflected in the interesting transport and magnetic properties of these films. On the other hand, there are no influences of compositional in-homogeneity and surface/interface roughness on the magnetic and transport properties of the films.
△ Less
Submitted 13 October, 2005;
originally announced October 2005.
