Showing 1–50 of 59 results for author: Thomas, P

Non-polaritonic effects in cavity-modified photochemistry

Authors: Philip A. Thomas, Wai Jue Tan, Vasyl G. Kravets, Alexander N. Grigorenko, William L. Barnes

Abstract: Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which… ▽ More Strong coupling of molecules to vacuum fields has been widely reported to lead to modified chemical properties such as reaction rates. However, some recent attempts to reproduce infrared strong coupling results have not been successful, suggesting that factors other than strong coupling may sometimes be involved. Here we re-examine the first of these vacuum-modified chemistry experiments in which changes to a molecular photoisomerisation process in the UV-vis spectral range were attributed to strong coupling of the molecules to visible light. We observed significant variations in photoisomerisation rates consistent with the original work; however, we found no evidence that these changes need to be attributed to strong coupling. Instead, we suggest that the photoisomerisation rates involved are most strongly influenced by the absorption of ultraviolet radiation in the cavity. Our results indicate that care must be taken to rule out non-polaritonic effects before invoking strong coupling to explain any changes of chemical properties arising in cavity-based experiments. △ Less

Submitted 14 July, 2023; v1 submitted 8 June, 2023; originally announced June 2023.

Comments: 33 pages, 17 figures

Journal ref: Adv. Mater. 2023, 2309393

All-optical control of phase singularities using strong light-matter coupling

Authors: Philip A. Thomas, Kishan S. Menghrajani, William L. Barnes

Abstract: Strong light-matter coupling occurs when the coupling strength between a confined electromagnetic mode and a molecular resonance exceeds losses to the environment. The study of strong coupling has been motivated by applications such as lasing and the modification of chemical processes. Here we show that strong coupling can be used to create phase singularities. Many nanophotonic structures have be… ▽ More Strong light-matter coupling occurs when the coupling strength between a confined electromagnetic mode and a molecular resonance exceeds losses to the environment. The study of strong coupling has been motivated by applications such as lasing and the modification of chemical processes. Here we show that strong coupling can be used to create phase singularities. Many nanophotonic structures have been designed to generate phase singularities for use in sensing and optoelectronics. We utilise the concept of cavity-free strong coupling, where electromagnetic modes sustained by a material are strong enough to strongly couple to the material's own molecular resonance, to create phase singularities in a simple thin film of organic molecules. We show that the use of photochromic molecules allows for all-optical control of phase singularities. Our results suggest a new application for strong light-matter coupling and a new, simplified, more versatile pathway to singular phase optics. △ Less

Submitted 29 September, 2021; originally announced September 2021.

Comments: 18 pages, 6 figures

An analytical approach to the Mean--Return-Time~Phase of isotropic stochastic oscillators

Authors: Konstantin Holzhausen, Peter J. Thomas, Benjamin Lindner

Abstract: One notion of phase for stochastic oscillators is based on the mean return-time (MRT): a set of points represents a certain phase if the mean time to return from any point in this set to this set after one rotation is equal to the mean rotation period of the oscillator (irrespective of the starting point). For this so far only algorithmically defined phase, we derive here analytical expressions fo… ▽ More One notion of phase for stochastic oscillators is based on the mean return-time (MRT): a set of points represents a certain phase if the mean time to return from any point in this set to this set after one rotation is equal to the mean rotation period of the oscillator (irrespective of the starting point). For this so far only algorithmically defined phase, we derive here analytical expressions for the important class of isotropic stochastic oscillators. This allows us to evaluate cases from the literature explicitly and to study the behavior of the MRT phase in the limits of strong noise. We also use the same formalism to show that lines of constant return time variance (instead of constant mean return time) can be defined, and that they in general differ from the MRT-isochrons. △ Less

Submitted 13 August, 2021; originally announced August 2021.

Comments: 5 pages, 4 figures

A new signature for strong light-matter coupling using spectroscopic ellipsometry

Authors: Philip A. Thomas, Wai Jue Tan, Henry A. Fernandez, William L. Barnes

Abstract: Light-matter interactions can occur when an ensemble of molecular resonators is placed in a confined electromagnetic field. In the strong coupling regime the rapid exchange of energy between the molecules and the electromagnetic field results in the emergence of hybrid light-matter states called polaritons. Multiple criteria exist to define the strong coupling regime, usually by comparing the spli… ▽ More Light-matter interactions can occur when an ensemble of molecular resonators is placed in a confined electromagnetic field. In the strong coupling regime the rapid exchange of energy between the molecules and the electromagnetic field results in the emergence of hybrid light-matter states called polaritons. Multiple criteria exist to define the strong coupling regime, usually by comparing the splitting of the polariton bands with the linewidths of the uncoupled modes. Here we highlight the limitations of these criteria and study strong coupling using spectroscopic ellipsometry, a commonly used optical characterisation technique. We identify a new signature of strong coupling in ellipsometric phase spectra. Combining ellipsometric amplitude and phase spectra yields a distinct topological feature that we suggest could serve as a new criterion for strong coupling. Our results introduce the idea of ellipsometric topology and could provide further insight into the transition from the weak to strong coupling regime. △ Less

Submitted 7 August, 2020; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: 20 pages, 10 figures

Spin pumping and large field-like torque at room temperature in sputtered amorphous WTe$_{2-x}$ films

Authors: Fan Yihong, Li Hongshi, DC Mahendra, Peterson Thomas, Held Jacob, Sahu Protyush, Chen Junyang, Zhang Delin, Mkhoyan Andre Mkhoyan, Wang Jian-Ping

Abstract: We studied the spin-to-charge and charge-to-spin conversion at room temperature in sputtered WTe2-x (x=0.8)(t)/Co20Fe60B20(6 nm) heterostructures. Spin pumping measurements were used to characterize the spin-to-charge efficiency and the spin efficiency was calculated to be larger than ~0.035. Second harmonic Hall measurements were carried out to estimate the charge-to-spin conversion ratio. We fou… ▽ More We studied the spin-to-charge and charge-to-spin conversion at room temperature in sputtered WTe2-x (x=0.8)(t)/Co20Fe60B20(6 nm) heterostructures. Spin pumping measurements were used to characterize the spin-to-charge efficiency and the spin efficiency was calculated to be larger than ~0.035. Second harmonic Hall measurements were carried out to estimate the charge-to-spin conversion ratio. We found that the system exhibits a large field-like-torque (spin torque efficiency ~ 0.1) and small damping-like-torque (spin torque efficiency ~0.001) compared to that reported for heavy metals. High-resolution transmission electron microscopy images show that the WTe2-x layer is amorphous, which may enhance the spin swapping effect by inducing large interfacial spin orbit scattering, thus contributing to a large field like torque. △ Less

Submitted 21 February, 2020; originally announced February 2020.

Stationary distributions of continuous-time Markov chains: a review of theory and truncation-based approximations

Authors: Juan Kuntz, Philipp Thomas, Guy-Bart Stan, Mauricio Barahona

Abstract: Computing the stationary distributions of a continuous-time Markov chain (CTMC) involves solving a set of linear equations. In most cases of interest, the number of equations is infinite or too large, and the equations cannot be solved analytically or numerically. Several approximation schemes overcome this issue by truncating the state space to a manageable size. In this review, we first give a c… ▽ More Computing the stationary distributions of a continuous-time Markov chain (CTMC) involves solving a set of linear equations. In most cases of interest, the number of equations is infinite or too large, and the equations cannot be solved analytically or numerically. Several approximation schemes overcome this issue by truncating the state space to a manageable size. In this review, we first give a comprehensive theoretical account of the stationary distributions and their relation to the long-term behaviour of CTMCs that is readily accessible to non-experts and free of irreducibility assumptions made in standard texts. We then review truncation-based approximation schemes for CTMCs with infinite state spaces paying particular attention to the schemes' convergence and the errors they introduce, and we illustrate their performance with an example of a stochastic reaction network of relevance in biology and chemistry. We conclude by discussing computational trade-offs associated with error control and several open questions. △ Less

Submitted 24 August, 2020; v1 submitted 12 September, 2019; originally announced September 2019.

MSC Class: 60J27 (Primary); 60J22; 65C40; 90C05; 90C90 (Secondary)

Phase descriptions of a multidimensional Ornstein-Uhlenbeck process

Authors: Peter J. Thomas, Benjamin Lindner

Abstract: Stochastic oscillators play a prominent role in different fields of science. Their simplified description in terms of a phase has been advocated by different authors using distinct phase definitions in the stochastic case. One notion of phase that we put forward previously, the \emph{asymptotic phase of a stochastic oscillator}, is based on the eigenfunction expansion of its probability density. M… ▽ More Stochastic oscillators play a prominent role in different fields of science. Their simplified description in terms of a phase has been advocated by different authors using distinct phase definitions in the stochastic case. One notion of phase that we put forward previously, the \emph{asymptotic phase of a stochastic oscillator}, is based on the eigenfunction expansion of its probability density. More specifically, it is given by the complex argument of the eigenfunction of the backward operator corresponding to the least negative eigenvalue. Formally, besides the `backward' phase, one can also define the `forward' phase as the complex argument of the eigenfunction of the forward Kolomogorov operator corresponding to the least negative eigenvalue. Until now, the intuition about these phase descriptions has been limited. Here we study these definitions for a process that is analytically tractable, the two-dimensional Ornstein-Uhlenbeck process with complex eigenvalues. For this process, (i) we give explicit expressions for the two phases; (ii) we demonstrate that the isochrons are always the spokes of a wheel, but that (iii) the spacing of these isochrons (their angular density) is different for backward and forward phases; (iv) we show that the isochrons of the backward phase are completely determined by the deterministic part of the vector field, whereas the forward phase also depends on the noise matrix; and (v) we demonstrate that the mean progression of the backward phase in time is always uniform, whereas this is not true for the forward phase except in the rotationally symmetric case. We illustrate our analytical results for a number of qualitatively different cases. △ Less

Submitted 24 May, 2019; originally announced May 2019.

Journal ref: Phys. Rev. E 99, 062221 (2019)

The exit time finite state projection scheme: bounding exit distributions and occupation measures of continuous-time Markov chains

Authors: Juan Kuntz, Philipp Thomas, Guy-Bart Stan, Mauricio Barahona

Abstract: We introduce the exit time finite state projection (ETFSP) scheme, a truncation-based method that yields approximations to the exit distribution and occupation measure associated with the time of exit from a domain (i.e., the time of first passage to the complement of the domain) of time-homogeneous continuous-time Markov chains. We prove that: (i) the computed approximations bound the measures fr… ▽ More We introduce the exit time finite state projection (ETFSP) scheme, a truncation-based method that yields approximations to the exit distribution and occupation measure associated with the time of exit from a domain (i.e., the time of first passage to the complement of the domain) of time-homogeneous continuous-time Markov chains. We prove that: (i) the computed approximations bound the measures from below; (ii) the total variation distances between the approximations and the measures decrease monotonically as states are added to the truncation; and (iii) the scheme converges, in the sense that, as the truncation tends to the entire state space, the total variation distances tend to zero. Furthermore, we give a computable bound on the total variation distance between the exit distribution and its approximation, and we delineate the cases in which the bound is sharp. We also revisit the related finite state projection scheme and give a comprehensive account of its theoretical properties. We demonstrate the use of the ETFSP scheme by applying it to two biological examples: the computation of the first passage time associated with the expression of a gene, and the fixation times of competing species subject to demographic noise. △ Less

Submitted 25 January, 2019; v1 submitted 29 January, 2018; originally announced January 2018.

MSC Class: 60J27; 60J28; 65C40; 65G20

Journal ref: SIAM Journal on Scientific Computing (2019) 41:A748-A769

Thin film metrology and microwave loss characterization of indium and aluminum/indium superconducting planar resonators

Authors: C. R. H. McRae, J. H. Béjanin, C. T. Earnest, T. G. McConkey, J. R. Rinehart, C. Deimert, J. P. Thomas, Z. R. Wasilewski, M. Mariantoni

Abstract: Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing materials losses is crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature supe… ▽ More Scalable architectures characterized by quantum bits (qubits) with low error rates are essential to the development of a practical quantum computer. In the superconducting quantum computing implementation, understanding and minimizing materials losses is crucial to the improvement of qubit performance. A new material that has recently received particular attention is indium, a low-temperature superconductor that can be used to bond pairs of chips containing standard aluminum-based qubit circuitry. In this work, we characterize microwave loss in indium and aluminum/indium thin films on silicon substrates by measuring superconducting coplanar waveguide resonators and estimating the main loss parameters at powers down to the sub-photon regime and at temperatures between 10 and 450 mK. We compare films deposited by thermal evaporation, sputtering, and molecular beam epitaxy. We study the effects of heating in vacuum and ambient atmospheric pressure as well as the effects of pre-deposition wafer cleaning using hydrofluoric acid. The microwave measurements are supported by thin film metrology including secondary-ion mass spectrometry. For thermally evaporated and sputtered films, we find that two-level states (TLSs) are the dominating loss mechanism at low photon number and temperature. Thermally evaporated indium is determined to have a TLS loss tangent due to indium oxide of ~5x1e-05. The molecular beam epitaxial films show evidence of formation of a substantial indium-silicon eutectic layer, which leads to a drastic degradation in resonator performance. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 10 pages main, 5 figures, 3 tables; 3 pages supplem., 3 figures

Quantum liquid droplets in a mixture of Bose-Einstein condensates

Authors: C. R. Cabrera, L. Tanzi, J. Sanz, B. Naylor, P. Thomas, P. Cheiney, L. Tarruell

Abstract: Quantum droplets are small clusters of atoms self-bound by the balance of attractive and repulsive forces. Here we report on the observation of a novel type of droplets, solely stabilized by contact interactions in a mixture of two Bose-Einstein condensates. We demonstrate that they are several orders of magnitude more dilute than liquid helium by directly measuring their size and density via in s… ▽ More Quantum droplets are small clusters of atoms self-bound by the balance of attractive and repulsive forces. Here we report on the observation of a novel type of droplets, solely stabilized by contact interactions in a mixture of two Bose-Einstein condensates. We demonstrate that they are several orders of magnitude more dilute than liquid helium by directly measuring their size and density via in situ imaging. Moreover, by comparison to a single-component condensate, we show that quantum many-body effects stabilize them against collapse. We observe that droplets require a minimum atom number to be stable. Below, quantum pressure drives a liquid-to-gas transition that we map out as a function of interaction strength. These ultra-dilute isotropic liquids remain weakly interacting and constitute an ideal platform to benchmark quantum many-body theories. △ Less

Submitted 25 August, 2017; originally announced August 2017.

Comments: 8 pages, 3 figures, includes supplementary material

Journal ref: Science 359, 301 (2018)

Hybrid graphene plasmonic waveguide modulators

Authors: D. Ansell, B. D. Thackray, D. E. Aznakayeva, P. Thomas, G. H. Auton, O. P. Marshall, F. J. Rodriguez, I. P. Radko, Z. Han, S. I. Bozhevolnyi, A. N. Grigorenko

Abstract: The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plas… ▽ More The unique optical and electronic properties of graphene allow one to realize active optical devices. While several types of graphene-based photonic modulators have already been demonstrated, the potential of combining the versatility of graphene with subwavelength field confinement of plasmonic/metallic structures is not fully realized. Here we report fabrication and study of hybrid graphene-plasmonic modulators. We consider several types of modulators and identify the most promising one for light modulation at telecom and near-infrared. Our proof-of-concept results pave the way towards on-chip realization of efficient graphene-based active plasmonic waveguide devices for optical communications. △ Less

Submitted 15 September, 2016; originally announced September 2016.

Comments: 13 pages, 7 figures

Distribution approximations for the chemical master equation: comparison of the method of moments and the system size expansion

Authors: Alexander Andreychenko, Luca Bortolussi, Ramon Grima, Philipp Thomas, Verena Wolf

Abstract: The stochastic nature of chemical reactions involving randomly fluctuating population sizes has lead to a growing research interest in discrete-state stochastic models and their analysis. A widely-used approach is the description of the temporal evolution of the system in terms of a chemical master equation (CME). In this paper we study two approaches for approximating the underlying probability d… ▽ More The stochastic nature of chemical reactions involving randomly fluctuating population sizes has lead to a growing research interest in discrete-state stochastic models and their analysis. A widely-used approach is the description of the temporal evolution of the system in terms of a chemical master equation (CME). In this paper we study two approaches for approximating the underlying probability distributions of the CME. The first approach is based on an integration of the statistical moments and the reconstruction of the distribution based on the maximum entropy principle. The second approach relies on an analytical approximation of the probability distribution of the CME using the system size expansion, considering higher-order terms than the linear noise approximation. We consider gene expression networks with unimodal and multimodal protein distributions to compare the accuracy of the two approaches. We find that both methods provide accurate approximations to the distributions of the CME while having different benefits and limitations in applications. △ Less

Submitted 30 September, 2015; originally announced September 2015.

Comments: 28 pages, 6 figures

MSC Class: 60J22; 44A60; 37N25 ACM Class: G.3; I.6.m

Approximate probability distributions of the master equation

Authors: Philipp Thomas, Ramon Grima

Abstract: Master equations are common descriptions of mesoscopic systems. Analytical solutions to these equations can rarely be obtained. We here derive an analytical approximation of the time-dependent probability distribution of the master equation using orthogonal polynomials. The solution is given in two alternative formulations: a series with continuous and a series with discrete support both of which… ▽ More Master equations are common descriptions of mesoscopic systems. Analytical solutions to these equations can rarely be obtained. We here derive an analytical approximation of the time-dependent probability distribution of the master equation using orthogonal polynomials. The solution is given in two alternative formulations: a series with continuous and a series with discrete support both of which can be systematically truncated. While both approximations satisfy the system size expansion of the master equation, the continuous distribution approximations become increasingly negative and tend to oscillations with increasing truncation order. In contrast, the discrete approximations rapidly converge to the underlying non-Gaussian distributions. The theory is shown to lead to particularly simple analytical expressions for the probability distributions of molecule numbers in metabolic reactions and gene expression systems. △ Less

Submitted 2 October, 2015; v1 submitted 13 November, 2014; originally announced November 2014.

Comments: 13 pages, 3 figures

Journal ref: Phys Rev E 92, 012120 (2015)

System size expansion using Feynman rules and diagrams

Authors: Philipp Thomas, Christian Fleck, Ramon Grima, Nikola Popović

Abstract: Few analytical methods exist for quantitative studies of large fluctuations in stochastic systems. In this article, we develop a simple diagrammatic approach to the Chemical Master Equation that allows us to calculate multi-time correlation functions which are accurate to a any desired order in van Kampen's system size expansion. Specifically, we present a set of Feynman rules from which this diag… ▽ More Few analytical methods exist for quantitative studies of large fluctuations in stochastic systems. In this article, we develop a simple diagrammatic approach to the Chemical Master Equation that allows us to calculate multi-time correlation functions which are accurate to a any desired order in van Kampen's system size expansion. Specifically, we present a set of Feynman rules from which this diagrammatic perturbation expansion can be constructed algorithmically. We then apply the methodology to derive in closed form the leading order corrections to the linear noise approximation of the intrinsic noise power spectrum for general biochemical reaction networks. Finally, we illustrate our results by describing noise-induced oscillations in the Brusselator reaction scheme which are not captured by the common linear noise approximation. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 25 pages, 5 figures, under review, Journal of Physics A

Controlled and Continuous Patterning of Organic and Inorganic Materials by Induced Nucleation in an Optical Tweezers

Authors: Basudev Roy, Manish Arya, Preethi Thomas, Julius Konstantin Jürgschat, Venkat Rao, Ayan Banerjee, Chilla Malla Reddy, Soumyajit Roy

Abstract: We demonstrate for the first time controlled patterning by inducing nucleation of material from a dense aqueous dispersion or solution in an optical tweezers. A hot spot is formed on a glass surface by the trapping laser due to which a water vapor bubble is formed causing Gibbs-Marangoni convection of material around the bubble. This results in accretion of material around the bubble, which eventu… ▽ More We demonstrate for the first time controlled patterning by inducing nucleation of material from a dense aqueous dispersion or solution in an optical tweezers. A hot spot is formed on a glass surface by the trapping laser due to which a water vapor bubble is formed causing Gibbs-Marangoni convection of material around the bubble. This results in accretion of material around the bubble, which eventually nucleates into a crystalline state of the material. The nucleation site, when moved by translating the microscope stage of the optical tweezers apparatus, forms a pattern. We have demonstrated the technique using exotic inorganic materials such as soft oxometalates, and organic materials such as glycine, paracetamol, and a fluorescent dye such as perylene. We have written patterns over lengths of nearly 1 mm at the rate of 1 Hz, with best resolution of about 1 micron. The technique has potential for a wide range of applications ranging from solution processed printable electronics to controlled catalysis. △ Less

Submitted 15 March, 2013; v1 submitted 8 March, 2013; originally announced March 2013.

Comments: 23 pages, 5 figures

Effect of TeO2 addition on the dielectric properties of CaCu3Ti4O12 ceramics derived from the oxalate precursor route

Authors: P. Thomas, K. B. R. Varma

Abstract: CaCu3Ti4O12 (CCTO) ceramics which has perovskite structure gained considerable attention due to its giant permittivity. But, it has high tan δ (0.1 at 1kHz) at room temperature, which needs to be minimised to the level of practical applications. Hence, TeO2 which is a good glass former has been deliberately added to CCTO nano ceramic (derived from the oxalate precursor route) to explore the possib… ▽ More CaCu3Ti4O12 (CCTO) ceramics which has perovskite structure gained considerable attention due to its giant permittivity. But, it has high tan δ (0.1 at 1kHz) at room temperature, which needs to be minimised to the level of practical applications. Hence, TeO2 which is a good glass former has been deliberately added to CCTO nano ceramic (derived from the oxalate precursor route) to explore the possibility of reducing the dielectric loss while maintaining the high permittivity. The structural, morphological and dielectric properties of the pure CCTO and TeO2 added ceramics were studied using X-ray diffraction, Scanning Electron Microscope along with Energy Dispersive X-ray Analysis (EDX), spectroscopy and Impedance analyzer. For the 2.0 wt % TeO2 added ceramics, there is a remarkable difference in the microstructural features as compared to that of pure CCTO ceramics. This sample exhibited permittivity values as high as 7387 @ 10 KHz and low dielectric loss value of 0.037 @ 10 kHz, which can be exploited for the high frequency capacitors application. △ Less

Submitted 21 January, 2013; originally announced January 2013.

Comments: unpublished 2013

Structural, Thermal and Electrical properties of Poly(methyl methacrylate)-CaCu3Ti4O12 composite sheets fabricated via melt mixing

Authors: P. Thomas, R. S. Ernest Ravindran, K. B. R. Varma

Abstract: Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), Thermo Mechanical (TMA), Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Impedance analyser for their structural, thermal and dielectric properties. Co… ▽ More Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) composites were fabricated via melt mixing followed by hot pressing technique. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), Thermo Mechanical (TMA), Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Impedance analyser for their structural, thermal and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. However, there was no significant difference in the glass transition (Tg) temperature between the polymer and the composite. The appearance of additional vibrational frequencies in the range 400-600 cm-1 in FTIR spectra indicated a possible interaction between PMMA and CCTO. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. The origin of AC conductivity particularly in the high frequency region was attributed to the electronic polarization. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Comments: submitted to Journal of Thermal Analysis and Calorimetry, 2012. arXiv admin note: substantial text overlap with arXiv:1301.4077

Synthesis of Nanoparticles of the Giant Dielectric Material, CaCu3Ti4O12 from a Precursor Route

Authors: P. Thomas, K. Dwarakanath, K. B. R. Varma, T. R. N. Kutty

Abstract: A complex oxalate precursor, CaCu3(TiO)4(C2O4)8.9H2O, was synthesized and the precipitate that obtained was confirmed to be monophasic by the wet chemical analyses, X-ray diffraction, FTIR absorption and TG, DTA analyses. The thermal decomposition of this oxalate precursor led to the formation of phase-pure calcium copper titanate, CaCu3Ti4O12, at 680oC. The bright field TEM micrographs revealed t… ▽ More A complex oxalate precursor, CaCu3(TiO)4(C2O4)8.9H2O, was synthesized and the precipitate that obtained was confirmed to be monophasic by the wet chemical analyses, X-ray diffraction, FTIR absorption and TG, DTA analyses. The thermal decomposition of this oxalate precursor led to the formation of phase-pure calcium copper titanate, CaCu3Ti4O12, at 680oC. The bright field TEM micrographs revealed that the size of the as synthesized crystallites to be in the 30 to 80 nm range. The powders so obtained had excellent sinterability resulting in high density ceramics which exhibited giant dielectric constants upto 40000 (1 kHz) at 25oC accompanied by low dielectric losses, less than 0.07. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Comments: arXiv admin note: substantial text overlap with arXiv:1301.4064

Journal ref: Journal of Thermal Analysis and Calorimetry, Vol. 95, 2009 1, 267

Fabrication and Characterization of Poly(methyl methacrylate)CaCu3Ti4O12 Composites

Authors: P. Thomas, R. S. Ernest Ravindran, K. B. R. Varma

Abstract: Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), scanning electron microscopy (SEM) and Impedance analyser for their structural, morphology and dielectric properties. Composites were found to have better thermal stability than that… ▽ More Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu3Ti4O12 (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X-ray diffraction (XRD), thermo gravimetric (TGA), scanning electron microscopy (SEM) and Impedance analyser for their structural, morphology and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization MWS effect. Theoretical models were employed to rationalise the dielectric behaviour of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both {beta} and {alpha} relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization △ Less

Submitted 17 January, 2013; originally announced January 2013.

Comments: submitted; Polymer Engineering and Science, 2013

Dielectric properties of Poly(methyl methacrylate) (PMMA)/CaCu3Ti4O12 Composites

Authors: P. Thomas, R. S. Ernest Ravindran, K. B. R. Varma

Abstract: Materials with high dielectric constant are in great demand for the miniaturization of electronic devices. More specifically, high dielectric constant polymer-ceramic composites are useful for embedded capacitor applications. A composite consisting of giant dielectric CaCu3Ti4O12 (CCTO) incorporated into the Poly(methyl methacrylate) (PMMA) polymer matrix has been fabricated by melt mixing followe… ▽ More Materials with high dielectric constant are in great demand for the miniaturization of electronic devices. More specifically, high dielectric constant polymer-ceramic composites are useful for embedded capacitor applications. A composite consisting of giant dielectric CaCu3Ti4O12 (CCTO) incorporated into the Poly(methyl methacrylate) (PMMA) polymer matrix has been fabricated by melt mixing followed by hot pressing. The composites thus fabricated has been characterised for structural, morphological and dielectric properties. The composites dielectric constants had increased when the CCTO content increased in the PMMA matrix. The dielectric constant of PMMA is around 4.9 @ 100Hz which has increased to 15.7 @ 100Hz when the ceramic content has increased to 40 Vol %. At low frequencies, space charge polarisation is dominant. This composite also exhibited remarkably low dielectric loss at high frequency, which makes this composite a suitable candidate for the capacitors in high frequency application. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Comments: IEEE, ICPADM, 2012

In-situ synthesis and characterization of polyaniline -CaCu3Ti4O12 nano crystal composites

Authors: P. Thomas, K. Dwarakanath, K. B. R. Varma

Abstract: High dielectric constant nano composite of Polyaniline (PANI) CaCu3Ti4O12 (CCTO) was synthesized using a simple procedure involving in-situ polymerization of aniline in dil. HCl. The PANI and the composite were subjected to X-ray diffraction, Fourier transform infrared, Thermo gravimetric, Scanning electron microscopy and Transmission electron microscopy analyses. The presence of the nano crystall… ▽ More High dielectric constant nano composite of Polyaniline (PANI) CaCu3Ti4O12 (CCTO) was synthesized using a simple procedure involving in-situ polymerization of aniline in dil. HCl. The PANI and the composite were subjected to X-ray diffraction, Fourier transform infrared, Thermo gravimetric, Scanning electron microscopy and Transmission electron microscopy analyses. The presence of the nano crystallites of CCTO embedded in the nanofibers of PANI matrix was established by TEM. Frequency dependent characteristics of the dielectric constant, dielectric loss and AC conductivity were studied for the PANI and the composites. The dielectric constant increased as the CCTO content increased in PANI but decreased with increasing frequency of measurement. The dielectric loss was two times less than the value obtained for pure PANI around 100Hz. The AC conductivity increased slightly upto 2kHz as the CCTO content increased in the PANI which was attributed to the polarization of the charge carriers. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Journal ref: Synthetic Metals 159, 2009, 2128

Structural and dielectric properties of glasses in the system TeO2-CaCu3Ti4O12

Authors: P. Thomas, K. B. R. Varma

Abstract: The glasses in the system (100-x)TeO2-xCaCu3Ti4O12, (x=0.25 to 3 mol %) were fabricated. The color varied from olive green to brown as the CaCu3Ti4O12 (CCTO) content increased in TeO2 matrix. The X-ray powder diffraction and differential scanning calorimetric analyses that were carried out on the as-quenched samples confirmed their amorphous and glassy nature respectively. The dielectric constant… ▽ More The glasses in the system (100-x)TeO2-xCaCu3Ti4O12, (x=0.25 to 3 mol %) were fabricated. The color varied from olive green to brown as the CaCu3Ti4O12 (CCTO) content increased in TeO2 matrix. The X-ray powder diffraction and differential scanning calorimetric analyses that were carried out on the as-quenched samples confirmed their amorphous and glassy nature respectively. The dielectric constant and loss in the 100 Hz-1MHz frequency range were monitored as a function of temperature (50-400oC). The dielectric constant and the loss (D) increased as the CCTO content increased in TeO2 at all the frequencies and temperatures under investigation. Further, the effective dielectric constant and D were found to be frequency independent in the 50-200oC temperature range. The value obtained for the loss at 1MHz was 0.0019 which was typical of low loss materials, and exhibited near constant loss (NCL) in the 100Hz-1MHz frequency range. The electrical relaxation was rationalized using the electric modulus formalism. These glasses may be of considerable interest as substrates for high frequency circuit elements in conventional semiconductor industries owing to their high thermal stability. △ Less

Submitted 21 January, 2013; v1 submitted 17 January, 2013; originally announced January 2013.

Journal ref: Journal of Advanced Dielectrics, Vol. 2, No. 4 , 2012, 1250020

Nanoparticles of the giant dielectric material, CaCu3Ti4O12 from a precursor route

Authors: P. Thomas, K. Dwarakanath, K. B. R. Varma, T. R. N. Kutty

Abstract: A method of preparing the nanoparticles of CaCu3Ti4O12 (CCTO) with the crystallite size varying from 30 to 200 nm is optimized at a temperature as low as 680 1C from the exothermic thermal decomposition of an oxalate precursor, CaCu3(TiO)4(C2O4)8 ? 9H2O. The phase singularity of the complex oxalate precursor is confirmed by the wet chemical analyses, X-ray diffraction, FT-IR and TGA,DTA analyses.… ▽ More A method of preparing the nanoparticles of CaCu3Ti4O12 (CCTO) with the crystallite size varying from 30 to 200 nm is optimized at a temperature as low as 680 1C from the exothermic thermal decomposition of an oxalate precursor, CaCu3(TiO)4(C2O4)8 ? 9H2O. The phase singularity of the complex oxalate precursor is confirmed by the wet chemical analyses, X-ray diffraction, FT-IR and TGA,DTA analyses. The UV Vis reflectance and ESR spectra of CCTO powders indicate that the Cu(II) coordination changes from distorted octahedra to nearly flattened tetrahedra (squashed) to square-planar geometry with increasing annealing temperature. The HRTEM images have revealed that the evolution of the microstructure in nanoscale is related to the change in Cu(II) coordination around the surface regions for the chemically prepared powder specimens. The nearly flattened tetrahedral geometry prevails for CuO4 in the near surface regions of the particles, whereas square-planar CuO4 groups are dominant in the interior regions of the nanoparticles. The powders derived from the oxalate precursor have excellent sinterability, resulting in high-density ceramics which exhibited giant dielectric constants upto 40,000 (1 kHz) at 25 1C, accompanied by low dielectric loss 0.07. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Journal ref: Journal of Physics and Chemistry of Solids 69, 2008, 2594

Effect of calcium stoichiometry on the dielectric response of CaCu3Ti4O12 Ceramics

Authors: P. Thomas, K. Dwarakanath, K. B. R. Varma

Abstract: CaxCu3Ti4O12 polycrystalline powders with variation in calcium content were prepared via the oxalate precursor route. The structural, morphological and dielectric properties of the ceramics fabricated using these powders were studied using x ray diffraction, Scanning Electron Microscope along with Energy Dispersive X ray Analysis, Transmission Electron Microscopy, Electron Spin Resonance (ESR) spe… ▽ More CaxCu3Ti4O12 polycrystalline powders with variation in calcium content were prepared via the oxalate precursor route. The structural, morphological and dielectric properties of the ceramics fabricated using these powders were studied using x ray diffraction, Scanning Electron Microscope along with Energy Dispersive X ray Analysis, Transmission Electron Microscopy, Electron Spin Resonance (ESR) spectroscopy and Impedance analyzer. The X ray diffraction patterns obtained for the x = 0.97, 1.0 and 1.1 powdered ceramics could be indexed to a body centered cubic perovskite related structure associated with the space group Im3. The ESR studies confirmed the absence of oxygen vacancies in the ceramics that were prepared using the oxalate precursor route. The dielectric properties of these suggest that the calcium deficient sample (x= 0.97) has a reduced dielectric loss while retaining the high dielectric constant which is of significant industrial relevance. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Journal ref: Journal of the European Ceramic Society 32, 2012, 1681

Dielectric properties of Poly(vinylidene fluoride)/ CaCu3Ti4O12 nanocrystal composite thick films

Authors: P. Thomas, S. Satapathy, K. Dwarakanath, K. B. R. Varma

Abstract: The Poly(vinylidene fluoride)/CaCu3Ti4O12 (CCTO) nanocrystal composite films (85nm) with relatively high dielectric permittivity (90 at 100Hz) were prepared by the solution casting followed by spin coating technique. The structural, the microstructural and the dielectric properties of the composites were studied using X-ray diffraction, Scanning Electron Microscope, and Impedance analyzer respecti… ▽ More The Poly(vinylidene fluoride)/CaCu3Ti4O12 (CCTO) nanocrystal composite films (85nm) with relatively high dielectric permittivity (90 at 100Hz) were prepared by the solution casting followed by spin coating technique. The structural, the microstructural and the dielectric properties of the composites were studied using X-ray diffraction, Scanning Electron Microscope, and Impedance analyzer respectively. The effective dielectric permittivity of the composite increased with increase in the volume fraction of CCTO at all the frequencies (100 Hz to 1MHz) under investigation. The room temperature dielectric permittivity which is around 90 at 100Hz, has increased to about 290 at 125oC (100Hz). These results may be exploited in the development of high energy density capacitors. △ Less

Submitted 17 January, 2013; originally announced January 2013.

Journal ref: eXPRESS Polymer Letters Vol.4, No.10 2010, 632

Anomalous Hall Effect in perpendicularly magnetized Mn(_{3-x})Ga thin films

Authors: Manuel Glas, Daniel Ebke, Inga-Mareen Imort, Patrick Thomas, Günter Reiss

Abstract: Mn$_{3-x}$Ga (x = 0.1, 0.4, 0.7) thin films on MgO and SrTiO$_3$ substrates were investigated with magnetic anisotropy perpendicular to the film plane. An anomalous Hall-effect was observed for the tetragonal distorted lattice in the crystallographic D0$_{22}$ phase. The Hall resistivity $\varrho_{xy}$ was measured in a temperature range from 20 to 330 K. The determined skew scattering and side ju… ▽ More Mn$_{3-x}$Ga (x = 0.1, 0.4, 0.7) thin films on MgO and SrTiO$_3$ substrates were investigated with magnetic anisotropy perpendicular to the film plane. An anomalous Hall-effect was observed for the tetragonal distorted lattice in the crystallographic D0$_{22}$ phase. The Hall resistivity $\varrho_{xy}$ was measured in a temperature range from 20 to 330 K. The determined skew scattering and side jump coefficients are discussed with regard to the film composition and used substrate and compared to the crystallographic and magnetic properties. △ Less

Submitted 17 December, 2012; originally announced December 2012.

'Digital' Electron Diffraction - Seeing the Whole Picture

Authors: Richard Beanland, Paul J. Thomas, David I. Woodward, Pamela A. Thomas, Rudolf A. Roemer

Abstract: The advantages of convergent beam electron diffraction for symmetry determination at the scale of a few nm are well known. In practice, the approach is often limited due to the restriction on the angular range of the electron beam imposed by the small Bragg angle for high energy electron diffraction, i.e. a large convergence angle of the incident beam results in overlapping information in the diff… ▽ More The advantages of convergent beam electron diffraction for symmetry determination at the scale of a few nm are well known. In practice, the approach is often limited due to the restriction on the angular range of the electron beam imposed by the small Bragg angle for high energy electron diffraction, i.e. a large convergence angle of the incident beam results in overlapping information in the diffraction pattern. Techniques have been generally available since the 1980s which overcome this restriction for individual diffracted beams, by making a compromise between illuminated area and beam convergence. Here, we describe a simple technique which overcomes all of these problems using computer control, giving electron diffraction data over a large angular range for many diffracted beams from the volume given by a focused electron beam (typically a few nm or less). The increase in the amount of information significantly improves ease of interpretation and widens the applicability of the technique, particularly for thin materials or those with larger lattice parameters. △ Less

Submitted 28 November, 2012; originally announced November 2012.

Comments: 13 pages, 8 figures

Journal ref: Acta Cryst. (2013). A69, 427-434

Rigorous elimination of fast stochastic variables from the linear noise approximation using projection operators

Authors: Philipp Thomas, Ramon Grima, Arthur V. Straube

Abstract: The linear noise approximation (LNA) offers a simple means by which one can study intrinsic noise in monostable biochemical networks. Using simple physical arguments, we have recently introduced the slow-scale LNA (ssLNA) which is a reduced version of the LNA under conditions of timescale separation. In this paper, we present the first rigorous derivation of the ssLNA using the projection operator… ▽ More The linear noise approximation (LNA) offers a simple means by which one can study intrinsic noise in monostable biochemical networks. Using simple physical arguments, we have recently introduced the slow-scale LNA (ssLNA) which is a reduced version of the LNA under conditions of timescale separation. In this paper, we present the first rigorous derivation of the ssLNA using the projection operator technique and show that the ssLNA follows uniquely from the standard LNA under the same conditions of timescale separation as those required for the deterministic quasi-steady state approximation. We also show that the large molecule number limit of several common stochastic model reduction techniques under timescale separation conditions constitutes a special case of the ssLNA. △ Less

Submitted 24 September, 2012; originally announced September 2012.

Comments: 10 pages, 1 figure, submitted to Physical Review E; see also BMC Systems Biology 6, 39 (2012)

Journal ref: Phys. Rev. E 86, 041110 (2012)

Probing individual layers in functional oxide multilayers by wavelength-dependent Raman scattering

Authors: J. Kreisel, M. C. Weber, N. Dix, F. Sánchez, P. A. Thomas, J. Fontcuberta

Abstract: Integration of functional oxides on silicon requires the use of complex heterostructures involving oxides of which the structure and properties strongly depend on the strain state and strain-mediated interface coupling. The experimental observation of strain-related effects of the individual components remains challenging. Here we report a Raman scattering investigation of complex multilayer BaTiO… ▽ More Integration of functional oxides on silicon requires the use of complex heterostructures involving oxides of which the structure and properties strongly depend on the strain state and strain-mediated interface coupling. The experimental observation of strain-related effects of the individual components remains challenging. Here we report a Raman scattering investigation of complex multilayer BaTiO3/LaNiO3/CeO2/YSZ thin film structures on silicon. It is shown that the Raman signature of the multilayers differs significantly for three different laser wavelengths (633, 442 and 325 nm). Our results demonstrate that Raman scattering at various wavelengths allows both the identification of the individual layers of a functional oxide multilayers and monitoring their strain state. It is shown that all layers of the investigated multilayer are strained with respect to the bulk reference samples, and that strain induces a new crystal structure in the embedded LaNiO3. Based on this, we demonstrate that Raman scattering at various wavelengths offers a well-adapted, non-destructive probe for the investigation of strain and structure changes, even in complex thin film heterostructures. △ Less

Submitted 17 July, 2012; v1 submitted 15 May, 2012; originally announced May 2012.

Comments: Revised version, accepted for publication in Adv. Funct. Mater

Phonon Raman scattering of RCrO3 perovskites (R = Y, La, Pr, Sm, Gd, Dy, Ho, Yb, Lu)

Authors: M. Weber, J. Kreisel, P. A. Thomas, M. Newton, K. Sardar, R. I. Walton

Abstract: We report a systematic investigation of orthorhombic perovskite-type RCrO3 powder samples by Raman scattering for nine different rare earth R3+ cations (R = Y, La, Pr, Sm, Gd, Dy, Ho, Yb, Lu). The room-temperature Raman spectra and the associated phonon mode assignment provide reference data for structural investigation of the whole series of RCrO3 orthochromites and phonon ab-initio calculations.… ▽ More We report a systematic investigation of orthorhombic perovskite-type RCrO3 powder samples by Raman scattering for nine different rare earth R3+ cations (R = Y, La, Pr, Sm, Gd, Dy, Ho, Yb, Lu). The room-temperature Raman spectra and the associated phonon mode assignment provide reference data for structural investigation of the whole series of RCrO3 orthochromites and phonon ab-initio calculations. The assignment of the chromite spectra and comparison with Raman data on other orthorhombic perovskites allows correlating the phonon modes with the structural distortions in the RCrO3 series. In particular, two Ag modes are identified as octahedra rotation soft modes as their positions scale linearly with the octahedra tilt angle of the CrO6 octahedra. △ Less

Submitted 15 December, 2011; originally announced December 2011.

Comments: 7 Figures

Journal ref: Phys. Rev. B 85, 054303 (2012)

Limitations of the stochastic quasi-steady-state approximation in open biochemical reaction networks

Authors: Philipp Thomas, Arthur V. Straube, Ramon Grima

Abstract: The application of the quasi-steady-state approximation to the Michaelis-Menten reaction embedded in large open chemical reaction networks is a popular model reduction technique in deterministic and stochastic simulations of biochemical reactions inside cells. It is frequently assumed that the predictions of the reduced master equations obtained using the stochastic quasi-steady-state approach are… ▽ More The application of the quasi-steady-state approximation to the Michaelis-Menten reaction embedded in large open chemical reaction networks is a popular model reduction technique in deterministic and stochastic simulations of biochemical reactions inside cells. It is frequently assumed that the predictions of the reduced master equations obtained using the stochastic quasi-steady-state approach are in very good agreement with the predictions of the full master equations, provided the conditions for the validity of the deterministic quasi-steady-state approximation are fulfilled. We here use the linear-noise approximation to show that this assumption is not generally justified for the Michaelis-Menten reaction with substrate input, the simplest example of an open embedded enzyme reaction. The reduced master equation approach is found to considerably overestimate the size of intrinsic noise at low copy numbers of molecules. A simple formula is obtained for the relative error between the predictions of the reduced and full master equations for the variance of the substrate concentration fluctuations. The maximum error is reached when modeling moderately or highly efficient enzymes, in which case the error is approximately 30%. The theoretical predictions are validated by stochastic simulations using experimental parameter values for enzymes involved in proteolysis, gluconeogenesis and fermentation. △ Less

Submitted 30 October, 2011; originally announced October 2011.

Comments: Main text (5 pages, 1 figure) and Supplementary information (2 pages), accepted by J. Chem. Phys. (Communication)

Journal ref: Journal of Chemical Physics 135, 181103 (2011)

Anomalous Hall effect in the Co-based Heusler compounds Co$_{2}$FeSi and Co$_{2}$FeAl

Authors: I. -M. Imort, P. Thomas, G. Reiss, A. Thomas

Abstract: The anomalous Hall effect (AHE) in the Heusler compounds Co$_{2}$FeSi and Co$_{2}$FeAl is studied in dependence of the annealing temperature to achieve a general comprehension of its origin. We have demonstrated that the crystal quality affected by annealing processes is a significant control parameter to tune the electrical resistivity $ρ_{xx}$ as well as the anomalous Hall resistivity $ρ_{ahe}$.… ▽ More The anomalous Hall effect (AHE) in the Heusler compounds Co$_{2}$FeSi and Co$_{2}$FeAl is studied in dependence of the annealing temperature to achieve a general comprehension of its origin. We have demonstrated that the crystal quality affected by annealing processes is a significant control parameter to tune the electrical resistivity $ρ_{xx}$ as well as the anomalous Hall resistivity $ρ_{ahe}$. Analyzing the scaling behavior of $ρ_{ahe}$ in terms of $ρ_{xx}$ points to a temperature-dependent skew scattering as the dominant mechanism in both Heusler compounds. △ Less

Submitted 26 September, 2011; originally announced September 2011.

Stochastic theory of large-scale enzyme-reaction networks: Finite copy number corrections to rate equation models

Authors: Philipp Thomas, Arthur V. Straube, Ramon Grima

Abstract: Chemical reactions inside cells occur in compartment volumes in the range of atto- to femtolitres. Physiological concentrations realized in such small volumes imply low copy numbers of interacting molecules with the consequence of considerable fluctuations in the concentrations. In contrast, rate equation models are based on the implicit assumption of infinitely large numbers of interacting molecu… ▽ More Chemical reactions inside cells occur in compartment volumes in the range of atto- to femtolitres. Physiological concentrations realized in such small volumes imply low copy numbers of interacting molecules with the consequence of considerable fluctuations in the concentrations. In contrast, rate equation models are based on the implicit assumption of infinitely large numbers of interacting molecules, or equivalently, that reactions occur in infinite volumes at constant macroscopic concentrations. In this article we compute the finite-volume corrections (or equivalently the finite copy number corrections) to the solutions of the rate equations for chemical reaction networks composed of arbitrarily large numbers of enzyme-catalyzed reactions which are confined inside a small sub-cellular compartment. This is achieved by applying a mesoscopic version of the quasi-steady state assumption to the exact Fokker-Planck equation associated with the Poisson Representation of the chemical master equation. The procedure yields impressively simple and compact expressions for the finite-volume corrections. We prove that the predictions of the rate equations will always underestimate the actual steady-state substrate concentrations for an enzyme-reaction network confined in a small volume. In particular we show that the finite-volume corrections increase with decreasing sub-cellular volume, decreasing Michaelis-Menten constants and increasing enzyme saturation. The magnitude of the corrections depends sensitively on the topology of the network. The predictions of the theory are shown to be in excellent agreement with stochastic simulations for two types of networks typically associated with protein methylation and metabolism. △ Less

Submitted 25 July, 2011; originally announced July 2011.

Comments: 13 pages, 4 figures; published in The Journal of Chemical Physics

Journal ref: J. Chem. Phys. 133, 195101 (2010)

How accurate are the non-linear chemical Fokker-Planck and chemical Langevin equations?

Authors: Ramon Grima, Philipp Thomas, Arthur V. Straube

Abstract: The chemical Fokker-Planck equation and the corresponding chemical Langevin equation are commonly used approximations of the chemical master equation. These equations are derived from an uncontrolled, second-order truncation of the Kramers-Moyal expansion of the chemical master equation and hence their accuracy remains to be clarified. We use the system-size expansion to show that chemical Fokker-… ▽ More The chemical Fokker-Planck equation and the corresponding chemical Langevin equation are commonly used approximations of the chemical master equation. These equations are derived from an uncontrolled, second-order truncation of the Kramers-Moyal expansion of the chemical master equation and hence their accuracy remains to be clarified. We use the system-size expansion to show that chemical Fokker-Planck estimates of the mean concentrations and of the variance of the concentration fluctuations about the mean are accurate to order $Ω^{-3/2}$ for reaction systems which do not obey detailed balance and at least accurate to order $Ω^{-2}$ for systems obeying detailed balance, where $Ω$ is the characteristic size of the system. Hence the chemical Fokker-Planck equation turns out to be more accurate than the linear-noise approximation of the chemical master equation (the linear Fokker-Planck equation) which leads to mean concentration estimates accurate to order $Ω^{-1/2}$ and variance estimates accurate to order $Ω^{-3/2}$. This higher accuracy is particularly conspicuous for chemical systems realized in small volumes such as biochemical reactions inside cells. A formula is also obtained for the approximate size of the relative errors in the concentration and variance predictions of the chemical Fokker-Planck equation, where the relative error is defined as the difference between the predictions of the chemical Fokker-Planck equation and the master equation divided by the prediction of the master equation. For dimerization and enzyme-catalyzed reactions, the errors are typically less than few percent even when the steady-state is characterized by merely few tens of molecules. △ Less

Submitted 28 July, 2011; v1 submitted 24 June, 2011; originally announced June 2011.

Comments: 39 pages, 3 figures, accepted for publication in J. Chem. Phys

Nonlinear optical properties of TeO$_2$ crystalline phases from first principles

Authors: Nabil Berkaine, Emmanuelle Orhan, Olivier Masson, Philippe Thomas, Javier Junquera

Abstract: We have computed second and third nonlinear optical susceptibilities of two crystalline bulk tellurium oxide polymorphs: $α$-TeO$_{2}$ (the most stable crystalline bulk phase) and $γ$-TeO$_{2}$ (the crystalline phase that ressembles the more to the glass phase. Third order nonlinear susceptibilities of the crystalline phases are two orders of magnitude larger than $α$-SiO$_{2}$ cristoballite, thus… ▽ More We have computed second and third nonlinear optical susceptibilities of two crystalline bulk tellurium oxide polymorphs: $α$-TeO$_{2}$ (the most stable crystalline bulk phase) and $γ$-TeO$_{2}$ (the crystalline phase that ressembles the more to the glass phase. Third order nonlinear susceptibilities of the crystalline phases are two orders of magnitude larger than $α$-SiO$_{2}$ cristoballite, thus extending the experimental observations on glasses to the case of crystalline compounds. While the electronic lone pairs of Te contribute to those large values, a full explanation of the anisotropy of the third order susceptibility tensor requires a detailed analysis of the structure, in particular the presence of helical chains, that seems to be linked to cooperative non-local polarizabilty effects. Our results demonstrate that first-principles simulations are a powerful predictive tool to estimate nonlinear optical susceptibilitites of materials. △ Less

Submitted 14 July, 2011; v1 submitted 28 December, 2010; originally announced December 2010.

Comments: 12 pages, 6 figures. Typos in Eq.(9) and Eq. (12) corrected

Journal ref: Phys. Rev. B 83, 245205 (2011)

Single Crystal Study of Competing Rhombohedral and Monoclinic Order in Lead Zirconate Titanate

Authors: D. Phelan, X. Long, Y. Xie, Z. -G. Ye, A. M. Glazer, H. Yokota, P. A. Thomas, P. M. Gehring

Abstract: Neutron diffraction data obtained on single crystals of PbZr1-xTixO3 with x = 0.325 and x = 0.460, which lie on the pseudorhombohedral side of the morphotropic phase boundary, suggest a coexistence of rhombohedral (R3m/R3c) and monoclinic (Cm) domains and that monoclinic order is enhanced by Ti substitution. A monoclinic phase with a doubled unit cell (Cc) is ruled out as the ground state. Neutron diffraction data obtained on single crystals of PbZr1-xTixO3 with x = 0.325 and x = 0.460, which lie on the pseudorhombohedral side of the morphotropic phase boundary, suggest a coexistence of rhombohedral (R3m/R3c) and monoclinic (Cm) domains and that monoclinic order is enhanced by Ti substitution. A monoclinic phase with a doubled unit cell (Cc) is ruled out as the ground state. △ Less

Submitted 15 November, 2010; originally announced November 2010.

Journal ref: Phys. Rev. Lett. 105, 207601 (2010)

Fabrication of superconducting MgB2 thin films by magnetron co-sputtering on (001) MgO substrates

Authors: Savio Fabretti, Patrick Thomas, Markus Meinert, Andy Thomas

Abstract: We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450°C and 750°C. We will show that the substrate temperature during the sputtering process and the post annealing temperatures play a crucial role in forming MgB2 superconducting t… ▽ More We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450°C and 750°C. We will show that the substrate temperature during the sputtering process and the post annealing temperatures play a crucial role in forming MgB2 superconducting thin films. We achieved a critical onset temperature of 27.1K for a film thickness of 30nm. The crystal structures were measured by x-ray diffraction. △ Less

Submitted 26 October, 2010; v1 submitted 19 August, 2010; originally announced August 2010.

Analytical Analysis of Single-Photon Correlations Emitted by Disordered Semiconductor Heterostructures

Authors: P. Bozsoki, W. Hoyer, M. Kira, I. Varga, P. Thomas, S. W. Koch, H. Schomerus

Abstract: In a recent publication [Phys. Rev. Lett. 97, 227402 (2006), cond-mat/0611411], it has been demonstrated numerically that a long-range disorder potential in semiconductor quantum wells can be reconstructed reliably via single-photon interferometry of spontaneously emitted light. In the present paper, a simplified analytical model of independent two-level systems is presented in order to study… ▽ More In a recent publication [Phys. Rev. Lett. 97, 227402 (2006), cond-mat/0611411], it has been demonstrated numerically that a long-range disorder potential in semiconductor quantum wells can be reconstructed reliably via single-photon interferometry of spontaneously emitted light. In the present paper, a simplified analytical model of independent two-level systems is presented in order to study the reconstruction procedure in more detail. With the help of this model, the measured photon correlations can be calculated analytically and the influence of parameters such as the disorder length scale, the wavelength of the used light, or the spotsize can be investigated systematically. Furthermore, the relation between the proposed angle-resolved single-photon correlations and the disorder potential can be understood and the measured signal is expected to be closely related to the characteristic strength and length scale of the disorder. △ Less

Submitted 18 August, 2007; originally announced August 2007.

Comments: 6 pages, 2 figures, submitted to the special issue of the Journal of Materials Science: Materials in Electronics (JMSE), presented at the ICOOPMA 2007 conference

Journal ref: J Mater Sci: Mater Electron 20, S23 (2009)

Signatures of Many-Particle Correlations in Two-Dimensional Fourier-Transform Spectra of Semiconductor Nanostructures

Authors: I. Kuznetsova, P. Thomas, T. Meier, T. Zhang, X. Li, R. P. Mirin, S. T. Cundiff

Abstract: On the basis of a microscopic theory, the signatures of many-particle correlations in Two-Dimensional Fourier-Transform Spectra (2D-FTS) of semiconductor nanostructures are identified and compared to experimental data. Spectra in the photon energy range of the heavy-hole and light-hole excitonic resonances show characteristic features due to correlations, which depend on the relative polarizatio… ▽ More On the basis of a microscopic theory, the signatures of many-particle correlations in Two-Dimensional Fourier-Transform Spectra (2D-FTS) of semiconductor nanostructures are identified and compared to experimental data. Spectra in the photon energy range of the heavy-hole and light-hole excitonic resonances show characteristic features due to correlations, which depend on the relative polarization directions of the excitation pulses. △ Less

Submitted 5 February, 2007; originally announced February 2007.

Comments: 5 pages, 2 color figures

Characterization of Disorder in Semiconductors via Single-Photon Interferometry

Authors: P. Bozsoki, P. Thomas, M. Kira, W. Hoyer, T. Meier, S. W. Koch, K. Maschke, I. Varga, H. Stolz

Abstract: The method of angular photonic correlations of spontaneous emission is introduced as an experimental, purely optical scheme to characterize disorder in semiconductor nanostructures. The theoretical expression for the angular correlations is derived and numerically evaluated for a model system. The results demonstrate how the proposed experimental method yields direct information about the spatia… ▽ More The method of angular photonic correlations of spontaneous emission is introduced as an experimental, purely optical scheme to characterize disorder in semiconductor nanostructures. The theoretical expression for the angular correlations is derived and numerically evaluated for a model system. The results demonstrate how the proposed experimental method yields direct information about the spatial distribution of the relevant states and thus on the disorder present in the system. △ Less

Submitted 15 November, 2006; originally announced November 2006.

Comments: 4 pages, 2 figures, accepted for PRL

Journal ref: Physical Review Letters 97, 227402 (2006)

Transport and recombination through weakly coupled localized spin pairs in semiconductors during coherent spin excitation

Authors: V. Rajevac, C. Boehme, C. Michel, A. Gliesche, K. Lips, S. D. Baranovski, P. Thomas

Abstract: Semi-analytical predictions for the transients of spin-dependent transport and recombination rates through localized states in semiconductors during coherent electron spin excitation are made for the case of weakly spin-coupled charge carrier ensembles. The results show that the on-resonant Rabi frequency of electrically or optically detected spin-oscillation doubles abruptly as the strength of… ▽ More Semi-analytical predictions for the transients of spin-dependent transport and recombination rates through localized states in semiconductors during coherent electron spin excitation are made for the case of weakly spin-coupled charge carrier ensembles. The results show that the on-resonant Rabi frequency of electrically or optically detected spin-oscillation doubles abruptly as the strength of the resonant microwave field gamma B_1 exceeds the Larmor frequency separation within the pair of charge carrier states between which the transport or recombination transition takes place. For the case of a Larmor frequency separation of the order of gamma B_1 and arbitrary excitation frequencies, the charge carrier pairs exhibit four different nutation frequencies. From the calculations, a simple set of equations for the prediction of these frequencies is derived. △ Less

Submitted 24 July, 2006; originally announced July 2006.

Simulation of the phononless hopping in a Coulomb glass

Authors: J. Matulewski, S. D. Baranovskii, P. Thomas

Abstract: The phononless hopping conductivity of a disordered system with localized states is studied in a broad range of frequencies by straightforward computer simulations taking into account Coulomb interactions. At sufficiently low temperatures, the conductivity is determined by the zero-phonon absorption of the photon by pairs of states. The laser frequency dependence of the conductivity is examined… ▽ More The phononless hopping conductivity of a disordered system with localized states is studied in a broad range of frequencies by straightforward computer simulations taking into account Coulomb interactions. At sufficiently low temperatures, the conductivity is determined by the zero-phonon absorption of the photon by pairs of states. The laser frequency dependence of the conductivity is examined and compared with the analytical model of Efros and Shklovskii and with recent experimental data obtained on Si:P. The range of parameters is determined, for which the conductivity dependence on photon energy best reproduces the experimental results. △ Less

Submitted 8 September, 2005; originally announced September 2005.

Comments: Presented as a poster at TIDS11, to be published in pss(c)

Microscopic modeling of photoluminescence of strongly disordered semiconductors

Authors: P. Bozsoki, M. Kira, W. Hoyer, T. Meier, I. Varga, P. Thomas, S. W. Koch

Abstract: A microscopic theory for the luminescence of ordered semiconductors is modified to describe photoluminescence of strongly disordered semiconductors. The approach includes both diagonal disorder and the many-body Coulomb interaction. As a case study, the light emission of a correlated plasma is investigated numerically for a one-dimensional two-band tight-binding model. The band structure of the… ▽ More A microscopic theory for the luminescence of ordered semiconductors is modified to describe photoluminescence of strongly disordered semiconductors. The approach includes both diagonal disorder and the many-body Coulomb interaction. As a case study, the light emission of a correlated plasma is investigated numerically for a one-dimensional two-band tight-binding model. The band structure of the underlying ordered system is assumed to correspond to either a direct or an indirect semiconductor. In particular, luminescence and absorption spectra are computed for various levels of disorder and sample temperature to determine thermodynamic relations, the Stokes shift, and the radiative lifetime distribution. △ Less

Submitted 7 February, 2006; v1 submitted 9 May, 2005; originally announced May 2005.

Comments: 35 pages, 14 figures

Journal ref: Journal of Luminescence 124, 99-112 (2007)

Dynamics of short time--scale energy relaxation of optical excitations due to electron--electron scattering in the presence of arbitrary disorder

Authors: Imre Varga, Peter Thomas, Torsten Meier, Stephan W. Koch

Abstract: A non--equilibrium occupation distribution relaxes towards the Fermi--Dirac distribution due to electron--electron scattering even in finite Fermi systems. The dynamic evolution of this thermalization process assumed to result from an optical excitation is investigated numerically by solving a Boltzmann equation for the carrier populations using a one--dimensional disordered system. We focus on… ▽ More A non--equilibrium occupation distribution relaxes towards the Fermi--Dirac distribution due to electron--electron scattering even in finite Fermi systems. The dynamic evolution of this thermalization process assumed to result from an optical excitation is investigated numerically by solving a Boltzmann equation for the carrier populations using a one--dimensional disordered system. We focus on the short time--scale behavior. The logarithmically long time--scale associated with the glassy behavior of interacting electrons in disordered systems is not treated in our investigation. For weak disorder and short range interaction we recover the expected result that disorder enhances the relaxation rate as compared to the case without disorder. For sufficiently strong disorder, however, we find an opposite trend due to the reduction of scattering probabilities originating from the strong localization of the single--particle states. Long--range interaction in this regime produces a similar effect. The relaxation rate is found to scale with the interaction strength, however, the interplay between the implicit and the explicit character of the interaction produces an anomalous exponent. △ Less

Submitted 11 April, 2003; v1 submitted 11 November, 2002; originally announced November 2002.

Comments: 4 pages, 3 EPS figures

Journal ref: Phys. Rev. B 68, 113104 (2003)

Interacting electrons in a one-dimensional random array of scatterers - A Quantum Dynamics and Monte-Carlo study

Authors: V. Filinov, P. Thomas, I. Varga, T. Meier, M. Bonitz, V. Fortov, S. W. Koch

Abstract: The quantum dynamics of an ensemble of interacting electrons in an array of random scatterers is treated using a new numerical approach for the calculation of average values of quantum operators and time correlation functions in the Wigner representation. The Fourier transform of the product of matrix elements of the dynamic propagators obeys an integral Wigner-Liouville-type equation. Initial c… ▽ More The quantum dynamics of an ensemble of interacting electrons in an array of random scatterers is treated using a new numerical approach for the calculation of average values of quantum operators and time correlation functions in the Wigner representation. The Fourier transform of the product of matrix elements of the dynamic propagators obeys an integral Wigner-Liouville-type equation. Initial conditions for this equation are given by the Fourier transform of the Wiener path integral representation of the matrix elements of the propagators at the chosen initial times. This approach combines both molecular dynamics and Monte Carlo methods and computes numerical traces and spectra of the relevant dynamical quantities such as momentum-momentum correlation functions and spatial dispersions. Considering as an application a system with fixed scatterers, the results clearly demonstrate that the many-particle interaction between the electrons leads to an enhancement of the conductivity and spatial dispersion compared to the noninteracting case. △ Less

Submitted 28 March, 2002; originally announced March 2002.

Comments: 10 pages and 8 figures, to appear in PRB April 15

Journal ref: Phys. Rev. B 65 165124 (2002)

A system for fast time-resolved measurements of c-axis quasiparticle conductivity in intrinsic Josephson junctions of 2212-BSCCO

Authors: J. C. Fenton, P. J. Thomas, G. Yang, C. E. Gough

Abstract: A wide-band cryogenic amplifier measurement system for time-resolved four-point IV-characteristic measurements on 2212-BSCCO mesa structures is described. We present measurements which demonstrate the importance of self-heating on 50 ns time scales. Such heating is likely to have been very significant in many previously published measurements, where the reported nonlinear IV characteristics have… ▽ More A wide-band cryogenic amplifier measurement system for time-resolved four-point IV-characteristic measurements on 2212-BSCCO mesa structures is described. We present measurements which demonstrate the importance of self-heating on 50 ns time scales. Such heating is likely to have been very significant in many previously published measurements, where the reported nonlinear IV characteristics have been used to derive superconducting energy gaps. △ Less

Submitted 26 March, 2002; originally announced March 2002.

Comments: 4 pages, 4 figures. To appear in Applied Physics Letters

Journal ref: Appl. Phys. Lett. 80 (2002) 2535

Dynamics of Coulomb-correlated electron-hole pairs in disordered semiconductor nanowires

Authors: I. Varga, C. Schlichenmaier, T. Meier, K. Maschke, P. Thomas, S. W. Koch

Abstract: The dynamics of optically generated electron-hole pairs is investigated in a disordered semiconductor nanowire. The particle pairs are generated by short laser pulses and their dynamics is followed using the Heisenberg equation of motion. Is is shown that Coulomb-correlation acts against localization in the case of the two-interacting particles (TIP) problem. Furthermore, currents are generated… ▽ More The dynamics of optically generated electron-hole pairs is investigated in a disordered semiconductor nanowire. The particle pairs are generated by short laser pulses and their dynamics is followed using the Heisenberg equation of motion. Is is shown that Coulomb-correlation acts against localization in the case of the two-interacting particles (TIP) problem. Furthermore, currents are generated using a coherent combination of full-gap and half-gap pulses. The subsequent application of a full-gap pulse after time $τ$ produces an intraband echo phenomenon $2τ$ time later. The echo current is shown to depend on the mass ratio between the electrons and the holes. △ Less

Submitted 23 November, 2001; originally announced November 2001.

Comments: 4 pages, 2 figures, to be published in Proceedings of XXXVIth Rencontres de Moriond (Jan 2001) "Electronic correlations: from Meso- to Nano-physics"

Journal ref: Electronic Correlations: from Meso- to Nanophysics (T. Martin, G. Montambaux and J. Tran Thanh Van eds.) (EDP Sciences, 2001) pp. 343.

Optically induced coherent intra-band dynamics in disordered semiconductors

Authors: C. Schlichenmaier, I. Varga, T. Meier, P. Thomas, S. W. Koch

Abstract: On the basis of a tight-binding model for a strongly disordered semiconductor with correlated conduction- and valence band disorder a new coherent dynamical intra-band effect is analyzed. For systems that are excited by two, specially designed ultrashort light-pulse sequences delayed by tau relatively to each other echo-like phenomena are predicted to occur. In addition to the inter-band photon… ▽ More On the basis of a tight-binding model for a strongly disordered semiconductor with correlated conduction- and valence band disorder a new coherent dynamical intra-band effect is analyzed. For systems that are excited by two, specially designed ultrashort light-pulse sequences delayed by tau relatively to each other echo-like phenomena are predicted to occur. In addition to the inter-band photon echo which shows up at exactly t=2*tau relative to the first pulse, the system responds with two spontaneous intra-band current pulses preceding and following the appearance of the photon echo. The temporal splitting depends on the electron-hole mass ratio. Calculating the population relaxation rate due to Coulomb scattering, it is concluded that the predicted new dynamical effect should be experimentally observable in an interacting and strongly disordered system, such as the Quantum-Coulomb-Glass. △ Less

Submitted 21 November, 2001; originally announced November 2001.

Comments: to be published in Physical Review B15 February 2002

Journal ref: Phys. Rev. B 65, (2002) 085306

Specific heat of the Coulomb glass

Authors: A. Mobius, P. Thomas, J. Talamantes, C. J. Adkins

Abstract: The specific heat of the Coulomb glass is studied by numerical simulations. Both the lattice model with various strengths of disorder, and the random-position model are considered for the one- to three-dimensional cases. In order to extend the investigations down to very low temperatures where the many-valley structure of the configuration space is of great importance we use a hybrid-Metropolis… ▽ More The specific heat of the Coulomb glass is studied by numerical simulations. Both the lattice model with various strengths of disorder, and the random-position model are considered for the one- to three-dimensional cases. In order to extend the investigations down to very low temperatures where the many-valley structure of the configuration space is of great importance we use a hybrid-Metropolis procedure. This algorithm bridges the gap between Metropolis simulation and analytical statistical mechanics. The analysis of the simulation results shows that the correlation length of the relevant processes is rather small, and that multi-particle processes yield an essential contribution to the specific heat in all cases except the one-dimensional random-position model. △ Less

Submitted 1 November, 2001; originally announced November 2001.

Comments: Contribution to the Festschrift dedicated to Prof. Michael Pollak on the occasion of his 75th birthday

Journal ref: Phil. Mag. B, 81, 1105 (2001)

Propagation of Coulomb-correlated electron-hole pairs in semiconductors with correlated and anticorrelated disorder

Authors: P. Thomas, I. Varga, T. Lemm, J. E. Golub, K. Maschke, T. Meier, S. W. Koch

Abstract: Local ultrafast optical excitation of electron-hole pairs in disordered semiconductors provides the possibility to observe experimentally interaction-assisted propagation of correlated quantum particles in a disordered environment. In addition to the interaction driven delocalization known for the conventional single-band TIP-(two-interacting-particles)-problem the semiconductor model has a rich… ▽ More Local ultrafast optical excitation of electron-hole pairs in disordered semiconductors provides the possibility to observe experimentally interaction-assisted propagation of correlated quantum particles in a disordered environment. In addition to the interaction driven delocalization known for the conventional single-band TIP-(two-interacting-particles)-problem the semiconductor model has a richer variety of physical parameters that give rise to new features in the temporal dynamics. These include different masses, correlated vs. anticorrelated disorder for the two particles, and dependence on spectral position of excitation pulse. △ Less

Submitted 28 February, 2000; originally announced February 2000.

Comments: 4 pages and 5 ps figures

Journal ref: phys. stat. sol. (b) v.218 pp.125 (2000)