Showing 1–42 of 42 results for author: Thomas, N

Origin of granular axial segregation bands in a rotating tumbler: An interface-mixing driven Rayleigh-Taylor instability

Authors: Umberto d'Ortona, Richard Lueptow, Nathalie Thomas

Abstract: The origin of large and small particle axial bands in long rotating tumblers is a long-standing question. Using DEM simulations, we show that this axial segregation is due to a Rayleigh-Taylor instability which is characterized by the fact that the density of a granular medium increases with mixing and decreases with segregation. For initially mixed particles, segregation and collisional diffusion… ▽ More The origin of large and small particle axial bands in long rotating tumblers is a long-standing question. Using DEM simulations, we show that this axial segregation is due to a Rayleigh-Taylor instability which is characterized by the fact that the density of a granular medium increases with mixing and decreases with segregation. For initially mixed particles, segregation and collisional diffusion in the flowing layer balance and lead to a three-layer system, with a layer of large particles over a layer of small particles, and, interposed between these layers, a layer of more densely packed mixed particles. The higher density mixed particle layer over the lower density small particle layer induces a Rayleigh-Taylor instability, evident as waviness in the interface between the layers. The waviness destabilizes into ascending plumes of small particles and descending plumes of mixed particles with large particles enriched near the surface, which become evident as small and large particle bands visible at the free surface. Rolls driven by segregation at the tilted interface between plumes maintain the pattern of frozen plumes. Published by the American Physical Society 2024 △ Less

Submitted 15 October, 2024; originally announced October 2024.

Journal ref: Physical Review Research, 2024, 6 (3), pp.L032038

Superconducting resonator parametric amplifiers with intrinsic separation of pump and signal tones

Authors: Songyuan Zhao, Stafford Withington, Christopher Niall Thomas

Abstract: Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation metho… ▽ More Superconducting resonator parametric amplifiers achieve ultra-low-noise amplification through the nonlinear kinetic inductance of thin-film superconductors. One of the main challenges to the operation of these devices is the separation of the strong pump tone from the signal tone after amplification has been achieved. In this paper, we propose and experimentally demonstrate a pump separation method based on operating a half-wave superconducting resonator amplifier behind a cryogenic circulator. Our pump separation scheme does not involve post-amplification interference, and thereby avoids the delicate phase matching of two different pump paths. We demonstrate the scheme using two-port half-wave resonator amplifiers based on superconducting NbN thin-films. We present measurements of gain profiles and degrees of pump separation for amplifiers having different coupling quality factors. On an amplifier having a coupling quality factor of $\sim2000$, we measured a peak signal gain of $15\,\mathrm{dB}$ whilst achieving pump separation of $12\,\mathrm{dB}$. The amplifier was stable for continuous measurements, and the gain drift was measured to be $0.15\,\mathrm{dB}$ over an hour. The same amplifier was operated at $3.2\,\mathrm{K}$ and achieved a peak signal gain of $11\,\mathrm{dB}$ whilst having a pump separation factor of $10.5\,\mathrm{dB}$. The pump separation scheme, and these promising results, will advance the development of superconducting resonator amplifiers as an important technology in quantum sensing. △ Less

Submitted 28 October, 2024; v1 submitted 4 June, 2024; originally announced June 2024.

Journal ref: J. Phys. D: Appl. Phys. 58 (2025) 035305

Nonlinear characteristics of Ti, Nb, and NbN superconducting resonators for parametric amplifiers

Authors: Songyuan Zhao, Stafford Withington, Christopher Niall Thomas

Abstract: Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based memories, and circuit quantum electrodynamics demonstrators. In this paper, we report microwave measurements of superconducting Ti, Nb, and NbN resonators and their use… ▽ More Superconducting resonators and parametric amplifiers are important components in scientific systems such as kinetic inductance detector arrays, frequency-domain multiplexers for other superconducting bolometers, spin-ensemble based memories, and circuit quantum electrodynamics demonstrators. In this paper, we report microwave measurements of superconducting Ti, Nb, and NbN resonators and their use as parametric amplifiers. These half-wave resonators were fabricated under near identical sputtering and lithographic conditions to ensure a like-for-like comparison of material properties. We report a wide range of properties and behaviours in terms of transition temperatures, resistivities, rate-limiting nonlinear response times, nonlinear dissipation, signs of the nonlinear inductances and their dependences on temperature and resonance harmonic. We have successfully operated Nb and NbN resonators as high gain parametric amplifiers, achieving greater than $20\,\mathrm{dB}$ of power amplification. We have shown that for a half-wave resonator, amplification can be realised not only in the fundamental resonance but also in the higher harmonic resonances. Further, for materials with high transition temperatures, e.g. Nb and NbN, amplification can be achieved at $\sim4\,\mathrm{K}$, i.e. a temperature maintained by a pulse tube cooler. Finally, in materials systems that have very fast response times, e.g. NbN, we have found that a cross-harmonic type of amplification can be achieved by placing pump tone in a different resonant mode as the signal and the idler. This wide range of observations will have important implications on the design and application of superconducting parametric amplifiers. △ Less

Submitted 17 October, 2023; v1 submitted 1 June, 2023; originally announced June 2023.

Journal ref: Superconductor Science and Technology, 36 (2023) 105010

VIS spectroscopy of NaCl-water ice mixtures irradiated with 1 and 5 keV electrons under Europa_s conditions: Formation of colour centres and Na colloids

Authors: Romain Cerubini, Antoine Pommerol, André Galli, Bernhard Jost, Peter Wurz, Nicolas Thomas

Abstract: Recent laboratory efforts and telescopic observations of Europa have shown the relevance of a yellow colouration of sodium chloride (NaCl) caused by crystal defects generated by irradiation. We further investigate this process by irradiating (with energetic electrons) different types of analogues where NaCl is associated in different ways to water ice. We produce two types of icy analogues: compac… ▽ More Recent laboratory efforts and telescopic observations of Europa have shown the relevance of a yellow colouration of sodium chloride (NaCl) caused by crystal defects generated by irradiation. We further investigate this process by irradiating (with energetic electrons) different types of analogues where NaCl is associated in different ways to water ice. We produce two types of icy analogues: compact slabs and granular particles where we investigate two particle sizes (5 and 70 $μ$m). We perform electron irradiation at cryogenic temperatures (100 K) and under high vacuum (10-7 mbar) conditions, with energies of 1 and 5 keV. We observe the formation of two different types of colour centres. The so-called F-centres (460 nm) were formed in every sample, but the intensity of the absorption band within the compact slabs surpassed any other icy analogues and was comparable to the intensity of the absorption band within pure NaCl grains. M-centres (720 nm) have not been detected at the surface of Europa so far, and were close to the detection limit during our irradiation of compact slabs. The slabs could be good analogues for Europa_s surface as they produce mainly F-centres. Other notable differences have been observed between compact slabs and granular samples, such as the presence of an absorption band at 580 nm attributed to colloids of Na, exclusively within granular samples. Such absorptions have not been reported in previous studies. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Comments: 57 pages, 13 figures

Journal ref: Icarus, June 2022

Disorder Suppression in Topological Semiconductor-Superconductor Junctions

Authors: Stuart N. Thomas, Sankar Das Sarma, Jay D. Sau

Abstract: Disorder in a proximitizing bulk superconductor can scatter quasiparticles in a putative topological superconductor and eventually destroy the topological superconducting state. We use a scattering approach and a random-matrix calculation to estimate the disorder scattering time in a topological Josephson junction. We find that the disorder scattering rate from the bulk of the superconductor, even… ▽ More Disorder in a proximitizing bulk superconductor can scatter quasiparticles in a putative topological superconductor and eventually destroy the topological superconducting state. We use a scattering approach and a random-matrix calculation to estimate the disorder scattering time in a topological Josephson junction. We find that the disorder scattering rate from the bulk of the superconductor, even in the strong coupling limit, is suppressed in the ratio of Fermi momenta between the semiconductor and superconductor. This suppression of disorder scattering is accompanied by near perfect Andreev reflection at such semiconductor/superconductor interfaces, which can be used as a signature of such clean proximity effect. We also find that these results can be understood by a semiclassical estimate of scattering. We discuss limits in other systems such as the semiconductor nanowire where disorder scattering is suppressed according to similar classical estimates. △ Less

Submitted 11 July, 2022; originally announced July 2022.

Comments: 13 pages, 2 figures

Journal ref: Phys. Rev. B 106, 174501 (2022)

Effects of reactive, dissipative and rate-limited nonlinearity on the behaviour of superconducting resonator parametric amplifiers

Authors: Christopher N. Thomas, Stafford Withington, Songyuan Zhao

Abstract: We present a formalism for modelling parametric amplification by resonators subject to rate-limited nonlinearity of mixed reactive/dissipative character, with particular relevance to superconducting devices. The non-linearity is assumed to be characterised by a single state parameter, which responds to changes in the energy stored in the resonator with finite response time. We show how the operati… ▽ More We present a formalism for modelling parametric amplification by resonators subject to rate-limited nonlinearity of mixed reactive/dissipative character, with particular relevance to superconducting devices. The non-linearity is assumed to be characterised by a single state parameter, which responds to changes in the energy stored in the resonator with finite response time. We show how the operating point and small signal amplification behaviour of the pumped resonator can be calculated, characterised and optimised in terms of a set of three dimensionless parameters. The formalism is then illustrated with a simple, first-order, model nonlinearity and the implications for amplification via quasiparticle generation in a superconductor discussed. Throughout we describe how the parameters needed to characterise the device can be determined experimentally from steady-state measurements. A key result of this paper is that rate-limiting of a nonlinear mechanism does not preclude amplification, although it does limit the bandwidth over which it may be achieved. △ Less

Submitted 15 December, 2022; v1 submitted 21 June, 2022; originally announced June 2022.

Comments: 62 pages with 12 Figures. Changes from V1 to V2: resonator added to title, new introduction, corrections to Figure 11/Section VH and misc. typos fixed

Nonlinear mechanisms in Al and Ti superconducting travelling-wave parametric amplifiers

Authors: Songyuan Zhao, Stafford Withington, Chris N. Thomas

Abstract: The underlying nonlinear mechanisms behind the operation of travelling-wave parametric amplifiers (TWPAs) are important in determining their performance in terms of added noise, maximum gain, and bandwidth. We describe a method of characterising the underlying nonlinearity of a superconducting material in terms of its dissipative-reactive ratio and the response time of the underlying microscopic p… ▽ More The underlying nonlinear mechanisms behind the operation of travelling-wave parametric amplifiers (TWPAs) are important in determining their performance in terms of added noise, maximum gain, and bandwidth. We describe a method of characterising the underlying nonlinearity of a superconducting material in terms of its dissipative-reactive ratio and the response time of the underlying microscopic processes. We describe and calculate the different behaviour arising from the equilibrium supercurrent nonlinearity, which has low dissipation and fast response time, and the non-equilibrium heating nonlinearity, which has high dissipation and slow response time. We have fabricated TWPAs based on Al and Ti, and characterised their nonlinearities using our analysis. For both Al and Ti, the measured dissipative-reactive ratios and response times are quantitatively similar to predictions for the non-equilibrium heating nonlinearity. We were able to obtain more than 20 dB of peak power gain, although only over a narrow bandwidth of a few kilohertz. Our method of characterising the underlying nonlinearities could also be useful in the understanding and design of other superconducting nonlinear devices such as parametric up-converters, kinetic inductance Fourier transform spectrometers, and resonator parametric amplifiers. △ Less

Submitted 14 June, 2022; v1 submitted 23 February, 2022; originally announced February 2022.

Report number: 365301

Journal ref: J. Phys. D: Appl. Phys. 55 (2022)

Mechanisms for recirculation cells in granular flows in rotating cylindrical rough tumblers

Authors: Umberto d'Ortona, Nathalie Thomas, Richard Lueptow

Abstract: Friction at the endwalls of partially-filled horizontal rotating tumblers induces curvature and axial drift of particle trajectories in the surface flowing layer. Here we describe the results of a detailed discrete element method study of the dry granular flow of monodisperse particles in threedimensional cylindrical tumblers with endwalls and cylindrical wall that can be either smooth or rough. E… ▽ More Friction at the endwalls of partially-filled horizontal rotating tumblers induces curvature and axial drift of particle trajectories in the surface flowing layer. Here we describe the results of a detailed discrete element method study of the dry granular flow of monodisperse particles in threedimensional cylindrical tumblers with endwalls and cylindrical wall that can be either smooth or rough. Endwall roughness induces more curved particle trajectories, while a smooth cylindrical wall enhances drift near the endwall. This drift induces recirculation cells near the endwall. The use of mixed roughness (cylindrical wall and endwalls having different roughness) shows the influence of each wall on the drift and curvature of particle trajectories as well as the modification of the free surface topography. The effects act in opposite directions and have variable magnitude along the length of the tumbler such that their sum determines both direction of net drift and the recirculation cells. Near the endwalls, the dominant effect is always the endwall effect, and the axial drift for surface particles is toward the endwalls. For long enough tumblers, a counter-rotating cell occurs adjacent to each of the endwall cells having a surface drift toward the center because the cylindrical wall effect is dominant there. These cells are not dynamically coupled with the two endwall cells. The competition between the drifts induced by the endwalls and the cylindrical wall determines the width and drift amplitude for both types of cells. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Reducing strain in heterogeneous quantum devices using atomic layer deposition

Authors: Oscar W. Kennedy, James O'Sullivan, Christoph W. Zollitsch, Chistopher N. Thomas, Stafford Withington, John J. L. Morton

Abstract: We investigated the use of dielectric layers produced by atomic layer deposition (ALD) as an approach to strain mitigation in composite silicon/superconductor devices operating at cryogenic temperatures. We show that the addition of an ALD layer acts to reduce the strain of spins closest to silicon/superconductor interface where strain is highest. We show that appropriately biasing our devices at… ▽ More We investigated the use of dielectric layers produced by atomic layer deposition (ALD) as an approach to strain mitigation in composite silicon/superconductor devices operating at cryogenic temperatures. We show that the addition of an ALD layer acts to reduce the strain of spins closest to silicon/superconductor interface where strain is highest. We show that appropriately biasing our devices at the hyperfine clock transition of bismuth donors in silicon, we can remove strain broadening and that the addition of ALD layers left $T_2$ (or temporal inhomogeneities) unchanged in these natural silicon devices. △ Less

Submitted 12 August, 2021; originally announced August 2021.

Characterising the optical response of ultra-low-noise far-infrared 60-110 $μ$m transition edge sensors

Authors: Emily A. Williams, Stafford Withington, David J. Goldie, Christopher N. Thomas, Peter A. R. Ade, Rashmi Sudiwala

Abstract: Far-infrared Transition Edge Sensors (TESs) are being developed for the SAFARI grating spectrometer on the cooled-aperture space telescope SPICA. In support of this work, we have devised a cryogenic (90 mK) test facility for carrying out precision optical measurements on ultra-low-noise TESs. Although our facility is suitable for the whole of the SAFARI wavelength range, 34-230 $μ$m, we focus on a… ▽ More Far-infrared Transition Edge Sensors (TESs) are being developed for the SAFARI grating spectrometer on the cooled-aperture space telescope SPICA. In support of this work, we have devised a cryogenic (90 mK) test facility for carrying out precision optical measurements on ultra-low-noise TESs. Although our facility is suitable for the whole of the SAFARI wavelength range, 34-230 $μ$m, we focus on a representative set of measurements at 60-110 $μ$m using a device having a Noise Equivalent Power (NEP) of 0.32 $\mathrm{aW/\sqrt{Hz}}$. The system is able to perform a range of measurements: (i) Dark electrical characterisation. (ii) Optical efficiency with respect to a partially coherent beam having a modal composition identical to that of an ideal imaging telescope. (iii) Optical saturation and dynamic range. (iv) Fast optical transient response to a modulated thermal source. (v) Optical transient response in the presence of high-level background loading. We describe dark measurements to determine the operating characteristics of a TES, and then compare predicted optical behaviour with measured optical behaviour. By comparing electrical and optical transient response, we were able to observe thermalisation in the device. We comment on the challenge of eliminating stray light. △ Less

Submitted 19 August, 2020; originally announced August 2020.

Spin resonance linewidths of bismuth donors in silicon coupled to planar microresonators

Authors: James O'Sullivan, Oscar W. Kennedy, Christoph W. Zollitsch, Mantas Šimėnas, Christopher N. Thomas, Leonid V. Abdurakhimov, Stafford Withington, John J. L. Morton

Abstract: Ensembles of bismuth donor spins in silicon are promising storage elements for microwave quantum memories due to their long coherence times which exceed seconds. Operating an efficient quantum memory requires achieving critical coupling between the spin ensemble and a suitable high-quality factor resonator -- this in turn requires a thorough understanding of the lineshapes for the relevant spin re… ▽ More Ensembles of bismuth donor spins in silicon are promising storage elements for microwave quantum memories due to their long coherence times which exceed seconds. Operating an efficient quantum memory requires achieving critical coupling between the spin ensemble and a suitable high-quality factor resonator -- this in turn requires a thorough understanding of the lineshapes for the relevant spin resonance transitions, particularly considering the influence of the resonator itself on line broadening. Here, we present pulsed electron spin resonance measurements of ensembles of bismuth donors in natural silicon, above which niobium superconducting resonators have been patterned. By studying spin transitions across a range of frequencies and fields we identify distinct line broadening mechanisms, and in particular those which can be suppressed by operating at magnetic-field-insensitive `clock transitions'. Given the donor concentrations and resonator used here, we measure a cooperativity $C\sim 0.2$ and based on our findings we discuss a route to achieve unit cooperativity, as required for a quantum memory. △ Less

Submitted 20 November, 2020; v1 submitted 15 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. Applied 14, 064050 (2020)

Self-Induced Rayleigh-Taylor Instability in Segregating Dry Granular Flows

Authors: Umberto d'Ortona, Nathalie Thomas

Abstract: Dry granular material flowing on rough inclines can experience a self-induced Rayleigh-Taylor (RT) instability followed by the spontaneous emergence of convection cells. For this to happen, particles are different in size and density, the larger particles are the denser but still segregate toward the surface. When the flow is, as usual, initially made of two layers, dense particles above, a Raylei… ▽ More Dry granular material flowing on rough inclines can experience a self-induced Rayleigh-Taylor (RT) instability followed by the spontaneous emergence of convection cells. For this to happen, particles are different in size and density, the larger particles are the denser but still segregate toward the surface. When the flow is, as usual, initially made of two layers, dense particles above, a Rayleigh-Taylor instability develops during the flow. When the flow is initially made of one homogeneous layer mixture, the granular segregation leads to the formation of an unstable layer of large-dense particles at the surface which subsequently destabilizes in a RT plume pattern. The unstable density gradient has been only induced by the motion of the granular matter. This self-induced Rayleigh-Taylor instability and the two-layer RT instability are studied using two different methods, experiments and simulations. At last, contrarily to the usual fluid behavior where the RT instability relaxes into two superimposed stable layers of fluid, the granular flow evolves to a pattern of alternated bands corresponing to recirculation cells analogous to Rayleigh-B{é}nard convection cells where segregation sustains the convective motion. △ Less

Submitted 4 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Lett. 124, 178001 (2020)

Nonlinear Effects in Superconducting Thin Film Microwave Resonators

Authors: Christopher N Thomas, Stafford Withington, Zhenyuan Sun, Tess Skyrme, David J. Goldie

Abstract: We discuss how reactive and dissipative non-linearities affect the intrinsic response of superconducting thin-film resonators. We explain how most, if not all, of the complex phenomena commonly seen can be described by a model in which the underlying resonance is a single-pole Lorentzian, but whose centre frequency and quality factor change as external parameters, such as readout power and frequen… ▽ More We discuss how reactive and dissipative non-linearities affect the intrinsic response of superconducting thin-film resonators. We explain how most, if not all, of the complex phenomena commonly seen can be described by a model in which the underlying resonance is a single-pole Lorentzian, but whose centre frequency and quality factor change as external parameters, such as readout power and frequency, are varied. What is seen during a vector-network-analyser measurement is series of samples taken from an ideal Lorentzian that is shifting and spreading as the readout frequency is changed. According to this model, it is perfectly proper to refer to, and measure, the resonant frequency and quality factor of the underlying resonance, even though the swept-frequency curves appear highly distorted and hysteretic. In those cases where the resonance curve is highly distorted, the specific shape of the trajectory in the Argand plane gives valuable insights into the second-order physical processes present. We discuss the formulation and consequences of this approach in the case of non-linear kinetic inductance, two-level-system loss, quasiparticle generation, and a generic model based on a power-law form. The generic model captures the key features of specific dissipative non-linearities, but additionally leads to insights into how general dissipative processes create characteristic forms in the Argand plane. We provide detailed formulations in each case, and indicate how they lead to the wide variety of phenomena commonly seen in experimental data. We also explain how the properties of the underlying resonance can be extracted from this data. Overall, our paper provides a self-contained compendium of behaviour that will help practitioners interpret and determine important parameters from distorted swept-frequency measurements. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: 55 pages, 15 figures

Nonlinear Properties of Supercurrent-Carrying Single and Multi-Layer Thin-Film Superconductors

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: Superconducting thin-films are central to the operation of many kinds of quantum sensors and quantum computing devices: Kinetic Inductance Detectors (KIDs), Travelling-Wave Parametric Amplifiers (TWPAs), Qubits, and Spin-based Quantum Memory elements. In all cases, the nonlinearity resulting from the supercurrent is a critical aspect of behaviour, either because it is central to the operation of t… ▽ More Superconducting thin-films are central to the operation of many kinds of quantum sensors and quantum computing devices: Kinetic Inductance Detectors (KIDs), Travelling-Wave Parametric Amplifiers (TWPAs), Qubits, and Spin-based Quantum Memory elements. In all cases, the nonlinearity resulting from the supercurrent is a critical aspect of behaviour, either because it is central to the operation of the device (TWPA), or because it results in non-ideal second-order effects (KID). Here we present an analysis of supercurrent carrying superconducting thin-films that is based on the generalized Usadel equations. Our analysis framework is suitable for both homogeneous and multilayer thin-films, and can be used to calculate the resulting density of states, superconducting transition temperature, superconducting critical current, complex conductivities, complex surface impedances, transmission line propagation constants, and nonlinear kinetic inductances in the presence of supercurrent. Our analysis gives the scale of kinetic inductance nonlinearity (I*) for a given material combination and geometry, and is important in optimizing the design of detectors and amplifiers in terms of materials, geometries, and dimensions. To investigate the validity of our analysis across a wide range of supercurrent, we have measured the transition temperatures of superconducting thin-films as a function of DC supercurrent. These measurements show good agreement with our theoretical predictions in the experimentally relevant range of current values. △ Less

Submitted 17 December, 2019; v1 submitted 18 July, 2019; originally announced July 2019.

Journal ref: J Low Temp Phys (2020)

Loss and Saturation in Superconducting Travelling-Wave Parametric Amplifiers

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: We have developed a coupled-mode analysis framework for superconducting travelling-wave parametric amplifiers using the full Telegrapher's equations to incorporate loss-related behaviour. Our model provides an explanation of previous experimental observations regarding loss in amplifiers, advantages of concatenating amplifiers to achieve high gains, and signal gain saturation. This work can be use… ▽ More We have developed a coupled-mode analysis framework for superconducting travelling-wave parametric amplifiers using the full Telegrapher's equations to incorporate loss-related behaviour. Our model provides an explanation of previous experimental observations regarding loss in amplifiers, advantages of concatenating amplifiers to achieve high gains, and signal gain saturation. This work can be used to guide the design of amplifiers in terms of the choice of material systems, transmission line geometry, operating conditions, and pump strength. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Journal ref: Journal of Physics D: Applied Physics, 52 (2019) 415301

Quantum transport properties of industrial $^{28}$Si/$^{28}$SiO$_2$

Authors: D. Sabbagh, N. Thomas, J. Torres, R. Pillarisetty, P. Amin, H. C. George, K. Singh, A. Budrevich, M. Robinson, D. Merrill, L. Ross, J. Roberts, L. Lampert, L. Massa, S. Amitonov, J. Boter, G. Droulers, H. G. J. Eenink, M. van Hezel, D. Donelson, M. Veldhorst, L. M. K. Vandersypen, J. S. Clarke, G. Scappucci

Abstract: We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of… ▽ More We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of $1.75\times10^{11}$ cm$^{-2}$ and a peak mobility of 9800 cm$^2$/Vs are measured at a temperature of 1.7 K. The $^{28}$Si/$^{28}$SiO$_2$ interface is characterized by a roughness of $Δ=0.4$ nm and a correlation length of $Λ=3.4$ nm. An upper bound for valley splitting energy of 480 $μ$eV is estimated at an effective electric field of 9.5 MV/m. These results support the use of wafer-scale $^{28}$Si/$^{28}$SiO$_2$ as a promising material platform to manufacture industrial spin qubits. △ Less

Submitted 21 January, 2019; v1 submitted 15 October, 2018; originally announced October 2018.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Applied 12, 014013 (2019)

Calculation and measurement of critical temperature in thin superconducting multilayers

Authors: Songyuan Zhao, David J. Goldie, Chris N. Thomas, Stafford Withington

Abstract: We have applied the Usadel equations to thin-film multilayer superconductors, and have calculated the critical temperature for general thin-film S-S' bilayer. We extended the bilayer calculation to general thin-film multilayers. The model demonstrates excellent fit with experimental data obtained from Ti-Al bilayers of varying thicknesses. We have applied the Usadel equations to thin-film multilayer superconductors, and have calculated the critical temperature for general thin-film S-S' bilayer. We extended the bilayer calculation to general thin-film multilayers. The model demonstrates excellent fit with experimental data obtained from Ti-Al bilayers of varying thicknesses. △ Less

Submitted 4 August, 2018; v1 submitted 28 May, 2018; originally announced May 2018.

Journal ref: Superconductor Science and Technology, 31 (2018) 105004

Superconducting transition edge sensors with phononic thermal isolation

Authors: Emily A. Williams, Stafford Withington, Christopher N. Thomas, David J. Goldie, Djelal Osman

Abstract: The sensitivity of a low-noise superconducting transition edge sensor (TES) is determined by the thermal conductance of the support structure that connects the active elements of the device to the heat bath. Low-noise devices require conductances in the range 0.1 to 10 pWK$^{-1}$, and so have to rely on diffusive phonon scattering in long, narrow, amorphous SiN$_\text{x}$ legs. We show that it is… ▽ More The sensitivity of a low-noise superconducting transition edge sensor (TES) is determined by the thermal conductance of the support structure that connects the active elements of the device to the heat bath. Low-noise devices require conductances in the range 0.1 to 10 pWK$^{-1}$, and so have to rely on diffusive phonon scattering in long, narrow, amorphous SiN$_\text{x}$ legs. We show that it is possible to manufacture and operate TESs having short, ballistic low-dimensional legs (cross section 500$\times$200 nm) that contain multi-element phononic interferometers and ring resonators. These legs transport heat in effectively just 5 elastic modes at the TES's operating temperature (< 150 mK), which is close to the quantised limit of 4. The phononic filters then reduce the thermal flux further by frequency-domain filtering. For example, a micromachined 3-element ring resonator reduced the flux to 19 % of a straight-legged ballistic device operating at the quantised limit, and 38 % of a straight-legged diffusive reference device. This work opens the way to manufacturing TESs where performance is determined entirely by filtered, few-mode, ballistic thermal transport in short, low-heat capacity legs, free from the artifacts of two level systems. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: 11 pages, 8 figures

The critical role of substrate disorder in valley splitting in Si quantum wells

Authors: Samuel F. Neyens, Ryan H. Foote, Brandur Thorgrimsson, T. J. Knapp, Thomas McJunkin, L. M. K. Vandersypen, Payam Amin, Nicole K. Thomas, James S. Clarke, D. E. Savage, M. G. Lagally, Mark Friesen, S. N. Coppersmith, M. A. Eriksson

Abstract: Motivated by theoretical predictions that spatially complex concentration modulations of Si and Ge can increase the valley splitting in quantum wells, we grow and characterize Si/SiGe heterostructures with a thin, pure Ge layer at the top of the quantum well using chemical vapor deposition. We show that these heterostructures remain hosts for high-mobility electron gases. We measure two quantum we… ▽ More Motivated by theoretical predictions that spatially complex concentration modulations of Si and Ge can increase the valley splitting in quantum wells, we grow and characterize Si/SiGe heterostructures with a thin, pure Ge layer at the top of the quantum well using chemical vapor deposition. We show that these heterostructures remain hosts for high-mobility electron gases. We measure two quantum wells with approximately five monolayers of pure Ge at the upper barrier, finding mobilities as high as 70,000 cm$^2$/Vs, compared to 100,000 cm$^2$/Vs measured in samples with no Ge layer. Activation energy measurements in quantum Hall states corresponding to Fermi levels in the gap between different valley states reveal energy gaps ranging from 30 to over 200 $μ$eV, and we extract a surprisingly strong dependence of the energy gap on electron density. We interpret our results using tight binding theory and argue that our results are evidence that atomic scale disorder at the quantum well interface dominates the behavior of the valley splittings of these modified heterostructures. △ Less

Submitted 15 June, 2018; v1 submitted 5 April, 2018; originally announced April 2018.

Comments: 7 pages

Journal ref: Applied Physics Letters 112, 243107 (2018)

Electromagnetic models for multilayer superconducting transmission lines

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: Thin-film superconducting transmission lines play important roles in many signal transmission and detection systems, including qubit coupling and read-out schemes, electron spin resonance systems, parametric amplifiers, and various ultra high sensitivity detectors. Here we present a rigorous method for computing the electromagnetic behaviour of superconducting microstrip transmission lines and cop… ▽ More Thin-film superconducting transmission lines play important roles in many signal transmission and detection systems, including qubit coupling and read-out schemes, electron spin resonance systems, parametric amplifiers, and various ultra high sensitivity detectors. Here we present a rigorous method for computing the electromagnetic behaviour of superconducting microstrip transmission lines and coplanar waveguides. Our method is based on conformal mapping, and is suitable for both homogeneous superconductors and proximity-coupled multilayers. We also present an effective conductivity approximation of multilayers, thereby allowing the multilayers to be analysed using existing electromagnetic design software. We compute the numerical results for Al-Ti bilayers and discuss the validity of our full computation and homogeneous approximation. △ Less

Submitted 29 June, 2018; v1 submitted 12 March, 2018; originally announced March 2018.

Journal ref: Superconductor Science and Technology, 31 (2018) 085012

A Crossbar Network for Silicon Quantum Dot Qubits

Authors: R. Li, L. Petit, D. P. Franke, J. P. Dehollain, J. Helsen, M. Steudtner, N. K. Thomas, Z. R. Yoscovits, K. J. Singh, S. Wehner, L. M. K. Vandersypen, J. S. Clarke, M. Veldhorst

Abstract: The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. In order to increase the number of qubits to the thousands or millions of qubits needed for practical quantum info… ▽ More The spin states of single electrons in gate-defined quantum dots satisfy crucial requirements for a practical quantum computer. These include extremely long coherence times, high-fidelity quantum operation, and the ability to shuttle electrons as a mechanism for on-chip flying qubits. In order to increase the number of qubits to the thousands or millions of qubits needed for practical quantum information we present an architecture based on shared control and a scalable number of lines. Crucially, the control lines define the qubit grid, such that no local components are required. Our design enables qubit coupling beyond nearest neighbors, providing prospects for non-planar quantum error correction protocols. Fabrication is based on a three-layer design to define qubit and tunnel barrier gates. We show that a double stripline on top of the structure can drive high-fidelity single-qubit rotations. Qubit addressability and readout are enabled by self-aligned inhomogeneous magnetic fields induced by direct currents through superconducting gates. Qubit coupling is based on the exchange interaction, and we show that parallel two-qubit gates can be performed at the detuning noise insensitive point. While the architecture requires a high level of uniformity in the materials and critical dimensions to enable shared control, it stands out for its simplicity and provides prospects for large-scale quantum computation in the near future. △ Less

Submitted 10 November, 2017; originally announced November 2017.

Comments: 13 pages, 7 figures

Journal ref: Science Advances 4, eaar3960 (2018)

Exploring the performance of thin-film superconducting multilayers as Kinetic Inductance Detectors for low-frequency detection

Authors: Songyuan Zhao, David J. Goldie, Stafford Withington, Chris N. Thomas

Abstract: We have solved numerically the diffusive Usadel equations that describe the spatially-varying superconducting proximity effect in Ti-Al thin-film bi- and trilayers with thickness values that are suitable for Kinetic Inductance Detectors (KIDs) to operate as photon detectors with detection thresholds in the frequency range of 50-90 GHz. Using Nam's extension of the Mattis-Bardeen calculation of the… ▽ More We have solved numerically the diffusive Usadel equations that describe the spatially-varying superconducting proximity effect in Ti-Al thin-film bi- and trilayers with thickness values that are suitable for Kinetic Inductance Detectors (KIDs) to operate as photon detectors with detection thresholds in the frequency range of 50-90 GHz. Using Nam's extension of the Mattis-Bardeen calculation of the superconductor complex conductivity, we show how to calculate the surface impedance for the spatially varying case, and hence the surface impedance quality factor. In addition, we calculate energy-and spatially-averaged quasiparticle lifetimes at temperatures well-below the transition temperature and compare to calculation in Al. Our results for the pair-breaking threshold demonstrate differences between bilayers and trilayers with the same total film thicknesses. We also predict high quality factors and long multilayer-averaged quasiparticle recombination times compared to thin-film Al. Our calculations give a route for designing KIDs to operate in this scientifically-important frequency regime. △ Less

Submitted 19 October, 2017; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: 9 pages, 10 figures

Journal ref: Superconductor Science and Technology, 31 (2017) 015007

Thermal elastic-wave attenuation in low-dimensional SiN$_{x}$ bars at low temperatures

Authors: Stafford Withington, Emily Williams, David J. Goldie, Christopher N. Thomas, Max Schneiderman

Abstract: At low temperatures, < 200 mK, the thermal flux through low-dimensional amorphous dielectric bars, < 2 $μ$m wide and 200 nm thick, is transported by a small number of low-order elastic modes. For long bars, L > 400 $μ$m, it is known that the conductance scales as 1/L, where L is the length, but for short bars, 1 $μ$m < L < 400 $μ$m, the length dependence is poorly known. Although it is assumed tha… ▽ More At low temperatures, < 200 mK, the thermal flux through low-dimensional amorphous dielectric bars, < 2 $μ$m wide and 200 nm thick, is transported by a small number of low-order elastic modes. For long bars, L > 400 $μ$m, it is known that the conductance scales as 1/L, where L is the length, but for short bars, 1 $μ$m < L < 400 $μ$m, the length dependence is poorly known. Although it is assumed that the transport must exhibit a diffusive to ballistic transition, the functional form of the transition and the scale size over which the transition occurs have not, to our knowledge, been measured. In this paper, we use ultra-low-noise superconducting Transition Edge Sensors (TESs) to measure the heat flux through a set of SiN$_{x}$ bars to establish the characteristic scale size of the ballistic to diffusive transition. For bars supporting 6 to 7 modes, we measure a thermal elastic-wave attenuation length of 20 $μ$m. The measurement is important because it sheds light on the scattering processes, which in turn are closely related to the generation of thermal fluctuation noise. Our own interest lies in creating patterned phononic filters for controlling heat flow and thermal noise in ultra-low-noise devices, but the work will be of interest to others trying to isolate devices from their environments, and studying loss mechanisms in micro-mechanical resonators. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 3 figures

Evidence of reverse and intermediate size segregation in dry granular flows down a rough incline

Authors: Nathalie Thomas, Umberto D'ortona

Abstract: In a dry granular flow, size segregation behave differently for a mixture containing a few large beads with a size ratio (S) above 5 (Thomas, Phys.Rev.E 62,96(2000)). For moderate large S, large beads migrate to an intermediate depth in the bed: this is called intermediate segregation. For the largest S, large beads migrate to the bottom: this is called reverse segregation (in contrast with surfac… ▽ More In a dry granular flow, size segregation behave differently for a mixture containing a few large beads with a size ratio (S) above 5 (Thomas, Phys.Rev.E 62,96(2000)). For moderate large S, large beads migrate to an intermediate depth in the bed: this is called intermediate segregation. For the largest S, large beads migrate to the bottom: this is called reverse segregation (in contrast with surface segregation). As the reversal and intermediate depth values depend on the bead fraction, this numerical study mainly uses a single large tracer. Small fractions are also computed showing the link between a tracer behavior and segregation process. For half-filled rotating drum and for rough incline, two and three (3D) dimensional cases are studied. In the tumbler, trajectories of a large tracer show that it reaches a constant depth during the flow. For large S, this depth is intermediate with a progressive sinking when S increases. Largest S correspond to tracers at the bottom of the flow. All 3D simulation are in quantitative agreement with the experiments. In the flow down an incline, a large tracer reaches an equilibrium depth during flow. For large S, its depth is intermediate, inside the bed. For the largest S, its depth is reverse, near the bottom. Results are slightly different for thin or thick flow. For 3D thick flows, the reversal between surface and bottom positions occurs within a short range of S: no tracer stabilizes near mid-height and two reachable intermediate depth layers exist, below the surface and above the bottom. For 3D thin flows, all intermediate depths are reachable, depending on S. The numerical study of larger tracer fractions (5-10%) shows the 3 segregation patterns (surface, intermediate, reverse) corresponding to the 3 types of equilibrium depth. The reversal is smoother than for a single tracer. It happens around S=4.5, in agreement with experiments. △ Less

Submitted 13 February, 2018; v1 submitted 16 December, 2016; originally announced December 2016.

Comments: 18 pages, 27 figures

Journal ref: Phys. Rev. E 97, 022903 (2018)

Holographic duality from random tensor networks

Authors: Patrick Hayden, Sepehr Nezami, Xiao-Liang Qi, Nathaniel Thomas, Michael Walter, Zhao Yang

Abstract: Tensor networks provide a natural framework for exploring holographic duality because they obey entanglement area laws. They have been used to construct explicit toy models realizing many interesting structural features of the AdS/CFT correspondence, including the non-uniqueness of bulk operator reconstruction in the boundary theory. In this article, we explore the holographic properties of networ… ▽ More Tensor networks provide a natural framework for exploring holographic duality because they obey entanglement area laws. They have been used to construct explicit toy models realizing many interesting structural features of the AdS/CFT correspondence, including the non-uniqueness of bulk operator reconstruction in the boundary theory. In this article, we explore the holographic properties of networks of random tensors. We find that our models naturally incorporate many features that are analogous to those of the AdS/CFT correspondence. When the bond dimension of the tensors is large, we show that the entanglement entropy of boundary regions, whether connected or not, obey the Ryu-Takayanagi entropy formula, a fact closely related to known properties of the multipartite entanglement of assistance. Moreover, we find that each boundary region faithfully encodes the physics of the entire bulk entanglement wedge. Our method is to interpret the average over random tensors as the partition function of a classical ferromagnetic Ising model, so that the minimal surfaces of Ryu-Takayanagi appear as domain walls. Upon including the analog of a bulk field, we find that our model reproduces the expected corrections to the Ryu-Takayanagi formula: the minimal surface is displaced and the entropy is augmented by the entanglement of the bulk field. Increasing the entanglement of the bulk field ultimately changes the minimal surface topologically in a way similar to creation of a black hole. Extrapolating bulk correlation functions to the boundary permits the calculation of the scaling dimensions of boundary operators, which exhibit a large gap between a small number of low-dimension operators and the rest. While we are primarily motivated by AdS/CFT duality, our main results define a more general form of bulk-boundary correspondence which could be useful for extending holography to other spacetimes. △ Less

Submitted 17 October, 2016; v1 submitted 7 January, 2016; originally announced January 2016.

Comments: 57 pages, 13 figures

Journal ref: JHEP 11 (2016) 009

Influence of Rough and Smooth Walls on Macroscale Granular Segregation Patterns

Authors: Umberto D'Ortona, Nathalie Thomas, Richard M. Lueptow

Abstract: Size bidisperse granular materials in a spherical tumbler segregate into two different patterns of three bands with either small particles at the equator and large particles at the poles or vice versa, depending upon the fill level in the tumbler. Here we use discrete element method (DEM) simulations with supporting qualitative experiments to explore the effect of the tumbler wall roughness on the… ▽ More Size bidisperse granular materials in a spherical tumbler segregate into two different patterns of three bands with either small particles at the equator and large particles at the poles or vice versa, depending upon the fill level in the tumbler. Here we use discrete element method (DEM) simulations with supporting qualitative experiments to explore the effect of the tumbler wall roughness on the segregation pattern, modeling the tumbler walls as either a closely packed monolayer of fixed particles resulting in a rough wall, or as a geometrically smooth wall. Even though the tumbler wall is in contact with the flowing layer only at its periphery, the impact of wall roughness is profound. Smooth walls tend toward a small-large-small (SLS) band pattern at the pole-equator-pole at all but the highest fill fractions; rough walls tend toward a large-small-large (LSL) band pattern at all but the lowest fill fractions. This comes about because smooth walls induce poleward axial drift of small particles and an equator-directed drift for large particles, resulting in an SLS band pattern. On the other hand, rough walls result in both sizes of particles moving poleward at the surface of the flow, but due to radial segregation, small particles percolate lower in the flowing layer where there is a return drift toward the equator while large particles remain at the surface near the pole, resulting in an LSL band pattern. The tendency toward either of the two band patterns depends on the fill level in the tumbler and the roughness of the tumbler's bounding wall. △ Less

Submitted 30 November, 2015; originally announced November 2015.

Comments: submitted to Phys. Rev. E

A Large-Scale GaP-on-Diamond Integrated Photonics Platform for NV Center-Based Quantum Information

Authors: Michael Gould, Srivatsa Chakravarthi, Ian R. Christen, Nicole Thomas, Shabnam Dadgostar, Yuncheng Song, Minjoo Larry Lee, Fariba Hatami, Kai-Mei C. Fu

Abstract: We present chip-scale transmission measurements for three key components of a GaP-on-diamond integrated photonics platform: waveguide-coupled disk resonators, directional couplers, and grating couplers. We also present proof-of-principle measurements demonstrating nitrogen-vacancy (NV) center emission coupled into selected devices. The demonstrated device performance, uniformity and yield place th… ▽ More We present chip-scale transmission measurements for three key components of a GaP-on-diamond integrated photonics platform: waveguide-coupled disk resonators, directional couplers, and grating couplers. We also present proof-of-principle measurements demonstrating nitrogen-vacancy (NV) center emission coupled into selected devices. The demonstrated device performance, uniformity and yield place the platform in a strong position to realize measurement-based quantum information protocols utilizing the NV center in diamond. △ Less

Submitted 16 October, 2015; originally announced October 2015.

Comments: 8 pages, 8 figures

Surface enhanced Raman spectroscopy using a single mode nanophotonic-plasmonic platform

Authors: Frédéric Peyskens, Ashim Dhakal, Pol Van Dorpe, Nicolas Le Thomas, Roel Baets

Abstract: Surface Enhanced Raman Spectroscopy (SERS) is a well-established technique for enhancing Raman signals. Recently photonic integrated circuits have been used, as an alternative to microscopy based excitation and collection, to probe SERS signals from external metallic nanoparticles. However, in order to develop quantitative on-chip SERS sensors, integration of dedicated nanoplasmonic antennas and w… ▽ More Surface Enhanced Raman Spectroscopy (SERS) is a well-established technique for enhancing Raman signals. Recently photonic integrated circuits have been used, as an alternative to microscopy based excitation and collection, to probe SERS signals from external metallic nanoparticles. However, in order to develop quantitative on-chip SERS sensors, integration of dedicated nanoplasmonic antennas and waveguides is desirable. Here we bridge this gap by demonstrating for the first time the generation of SERS signals from integrated bowtie nanoantennas, excited and collected by a single mode waveguide, and rigorously quantify the enhancement process. The guided Raman power generated by a 4-Nitrothiophenol coated bowtie antenna shows an 8 x 10^6 enhancement compared to the free-space Raman scattering. An excellent correspondence is obtained between the theoretically predicted and observed absolute Raman power. This work paves the way towards fully integrated lab-on-a-chip systems where the single mode SERS-probe can be combined with other photonic, fluidic or biological functionalities. △ Less

Submitted 10 August, 2015; originally announced August 2015.

Comments: Submitted to Nature Photonics

Influence of Rough and Smooth Walls on Macroscale Flows in Tumblers

Authors: Umberto D'Ortona, Nathalie Thomas, Zafir Zaman, Richard M. Lueptow

Abstract: Walls in discrete element method simulations of granular flows are sometimes modeled as a closely packed monolayer of fixed particles, resulting in a rough wall rather than a geometrically smooth wall. An implicit assumption is that the resulting rough wall differs from a smooth wall only locally at the particle scale. Here we test this assumption by considering the impact of the wall roughness at… ▽ More Walls in discrete element method simulations of granular flows are sometimes modeled as a closely packed monolayer of fixed particles, resulting in a rough wall rather than a geometrically smooth wall. An implicit assumption is that the resulting rough wall differs from a smooth wall only locally at the particle scale. Here we test this assumption by considering the impact of the wall roughness at the periphery of the flowing layer on the flow of monodisperse particles in a rotating spherical tumbler. We find that varying the wall roughness significantly alters average particle trajectories even far from the wall. Rough walls induce greater poleward axial drift of particles near the flowing layer surface, but decrease the curvature of the trajectories. Increasing the volume fill level in the tumbler has little effect on the axial drift for rough walls, but increases the drift while reducing curvature of the particle trajectories for smooth walls. The mechanism for these effects is related to the degree of local slip at the bounding wall, which alters the flowing layer thickness near the walls, affecting the particle trajectories even far from the walls near the equator of the tumbler. Thus, the proper choice of wall conditions is important in the accurate simulation of granular flows, even far from the bounding wall. △ Less

Submitted 30 November, 2015; v1 submitted 27 July, 2015; originally announced July 2015.

Comments: 32 pages, 19 figures, regular article, accepted for publication in Physical Review E 2006

Monte Carlo Search for Very Hard KSAT Realizations for Use in Quantum Annealing

Authors: Neuhaus Thomas

Abstract: Using powerful Multicanonical Ensemble Monte Carlo methods from statistical physics we explore the realization space of random K satisfiability (KSAT) in search for computational hard problems, most likely the 'hardest problems'. We search for realizations with unique satisfying assignments (USA) at ratio of clause to spin number $α=M/N$ that is minimal. USA realizations are found for $α$-values t… ▽ More Using powerful Multicanonical Ensemble Monte Carlo methods from statistical physics we explore the realization space of random K satisfiability (KSAT) in search for computational hard problems, most likely the 'hardest problems'. We search for realizations with unique satisfying assignments (USA) at ratio of clause to spin number $α=M/N$ that is minimal. USA realizations are found for $α$-values that approach $α=1$ from above with increasing number of spins $N$. We consider small spin numbers in $2 \le N \le 18$. The ensemble mean exhibits very special properties. We find that the density of states of the first excited state with energy one $Ω_1=g(E=1)$ is consistent with an exponential divergence in $N$: $Ω_1 \propto {\rm exp} [+rN]$. The rate constants for $K=2,3,4,5$ and $K=6$ of KSAT with USA realizations at $α=1$ are determined numerically to be in the interval $r=0.348$ at $K=2$ and $r=0.680$ at $K=6$. These approach the unstructured search value ${\rm ln}2$ with increasing $K$. Our ensemble of hard problems is expected to provide a test bed for studies of quantum searches with Hamiltonians that have the form of general Ising models. △ Less

Submitted 17 December, 2014; originally announced December 2014.

Comments: none

Electrothermal Model of Kinetic Inductance Detectors

Authors: Christopher N Thomas, Stafford Withington, David J Goldie

Abstract: An electrothermal model of Kinetic Inductance Detectors (KIDs) is described. The non-equilibrium state of the resonator's quasiparticle system is characterized by an effective temperature, which because of readout-power heating is higher than that of the bath. By balancing the flow of energy into the quasiparticle system, it is possible to calculate the steady-state large-signal, small-signal and… ▽ More An electrothermal model of Kinetic Inductance Detectors (KIDs) is described. The non-equilibrium state of the resonator's quasiparticle system is characterized by an effective temperature, which because of readout-power heating is higher than that of the bath. By balancing the flow of energy into the quasiparticle system, it is possible to calculate the steady-state large-signal, small-signal and noise behaviour. Resonance-curve distortion and hysteretic switching appear naturally within the framework. It is shown that an electrothermal feedback process exists, which affects all aspects of behaviour. It is also shown that generation-recombination noise can be interpreted in terms of the thermal fluctuation noise in the effective thermal conductance that links the quasiparticle and phonon systems of the resonator. Because the scheme is based on electrothermal considerations, multiple elements can be added to simulate the behaviour of complex devices, such as resonators on membranes, again taking into account readout power heating. △ Less

Submitted 20 April, 2015; v1 submitted 6 November, 2014; originally announced November 2014.

Comments: This is an author-created, un-copyedited version of an article published in Superconductor Science and Technology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at 10.1088/0953-2048/28/4/045012. Consult Version of Record for changes in response to reviewers

Journal ref: Supercond. Sci. Technol. 28 045012 (2015)

Universal Quantum Computation by Scattering in the Fermi-Hubbard Model

Authors: Ning Bao, Patrick Hayden, Grant Salton, Nathaniel Thomas

Abstract: The Hubbard model may be the simplest model of particles interacting on a lattice, but simulation of its dynamics remains beyond the reach of current numerical methods. In this article, we show that general quantum computations can be encoded into the physics of wave packets propagating through a planar graph, with scattering interactions governed by the fermionic Hubbard model. Therefore, simulat… ▽ More The Hubbard model may be the simplest model of particles interacting on a lattice, but simulation of its dynamics remains beyond the reach of current numerical methods. In this article, we show that general quantum computations can be encoded into the physics of wave packets propagating through a planar graph, with scattering interactions governed by the fermionic Hubbard model. Therefore, simulating the model on planar graphs is as hard as simulating quantum computation. We give two different arguments, demonstrating that the simulation is difficult both for wave packets prepared as excitations of the fermionic vacuum, and for hole wave packets at filling fraction one-half in the limit of strong coupling. In the latter case, which is described by the t-J model, there is only reflection and no transmission in the scattering events, as would be the case for classical hard spheres. In that sense, the construction provides a quantum mechanical analog of the Fredkin-Toffoli billiard ball computer. △ Less

Submitted 14 September, 2014; v1 submitted 11 September, 2014; originally announced September 2014.

Comments: 9 pages, 5 figures. Hyperref and cleveref LaTeX packages conflicted (fixed by including hyperref before cleveref). Other minor edits

Journal ref: New Journal of Physics, 17(9):093028, 2015

Waveguide-integrated single-crystalline GaP resonators on diamond

Authors: Nicole Thomas, Russell J. Barbour, Yuncheng Song, Minjoo Larry Lee, Kai-Mei C. Fu

Abstract: Large-scale entanglement of nitrogen-vacancy (NV) centers in diamond will require integration of NV centers with optical networks. Toward this goal, we present the fabrication of single-crystalline gallium phosphide (GaP) resonator-waveguide coupled structures on diamond. We demonstrate coupling between 1 μm diameter GaP disk resonators and waveguides with a loaded Q factor of 3,800, and evaluate… ▽ More Large-scale entanglement of nitrogen-vacancy (NV) centers in diamond will require integration of NV centers with optical networks. Toward this goal, we present the fabrication of single-crystalline gallium phosphide (GaP) resonator-waveguide coupled structures on diamond. We demonstrate coupling between 1 μm diameter GaP disk resonators and waveguides with a loaded Q factor of 3,800, and evaluate their potential for efficient photon collection if integrated with single photon emitters. This work opens a path toward scalable NV entanglement in the hybrid GaP/diamond platform, with the potential to integrate on-chip photon collection, switching, and detection for applications in quantum information processing. △ Less

Submitted 23 April, 2014; originally announced April 2014.

Comments: 9 pages, 5 figures, submitted to Optics Express

Room-temperature detection of single 20 nm super-paramagnetic nanoparticles with an imaging magnetometer

Authors: Michael Gould, Russell Barbour, Nicole Thomas, Hamed Arami, Kannan M. Krishnan, Kai-Mei Fu

Abstract: We demonstrate room temperature detection of single 20 nm super-paramagnetic nanoparticles (SPNs) with a wide-field optical microscope platform suitable for biological integration. The particles are made of magnetite (Fe3O4) and are thus non-toxic and biocompatible. Detection is accomplished via optically detected magnetic resonance imaging using nitrogen-vacancy defect centers in diamond, resulti… ▽ More We demonstrate room temperature detection of single 20 nm super-paramagnetic nanoparticles (SPNs) with a wide-field optical microscope platform suitable for biological integration. The particles are made of magnetite (Fe3O4) and are thus non-toxic and biocompatible. Detection is accomplished via optically detected magnetic resonance imaging using nitrogen-vacancy defect centers in diamond, resulting in a DC magnetic field detection limit of 2.3 μT. This marks a large step forward in the detection of SPNs, and we expect that it will allow for the development of magnetic-field-based biosensors capable of detecting a single molecular binding event. △ Less

Submitted 4 March, 2014; originally announced March 2014.

Comments: 12 pages, 3 figures, submitted to Applied Physics Letters

Imaging of s and d partial-wave interference in quantum scattering of identical bosonic atoms

Authors: Nicholas R. Thomas, Niels Kjaergaard, Paul S. Julienne, Andrew C. Wilson

Abstract: We report on the direct imaging of s and d partial-wave interference in cold collisions of atoms. Two ultracold clouds of Rb87 atoms were accelerated by magnetic fields to collide at energies near a d-wave shape resonance. The resulting halos of scattered particles were imaged using laser absorption. By scanning across the resonance we observed a marked evolution of the scattering patterns due t… ▽ More We report on the direct imaging of s and d partial-wave interference in cold collisions of atoms. Two ultracold clouds of Rb87 atoms were accelerated by magnetic fields to collide at energies near a d-wave shape resonance. The resulting halos of scattered particles were imaged using laser absorption. By scanning across the resonance we observed a marked evolution of the scattering patterns due to the energy dependent phase shifts for the interfering s and d waves. Since only two partial wave states are involved in the collision process the scattering yield and angular distributions have a simple interpretation in terms of a theoretical model. △ Less

Submitted 23 May, 2004; originally announced May 2004.

Comments: 4 pages, 4 figures

Journal ref: Physical Review Letters 93, 173201 (2004)

Evidence of two effects in the size segregation process in a dry granular media

Authors: G. Felix, N. Thomas

Abstract: In a half-filled rotating drum, the size segregation of particles of equal density builds a ring pattern of the large particles, whose location continuously varies from the periphery to the center depending on the size ratio between particles [Thomas, Phys. Rev. E 62, 1 (2000) 961-974]. For small size ratios (typically15): large beads are close to the bottom in a reversing position. The existenc… ▽ More In a half-filled rotating drum, the size segregation of particles of equal density builds a ring pattern of the large particles, whose location continuously varies from the periphery to the center depending on the size ratio between particles [Thomas, Phys. Rev. E 62, 1 (2000) 961-974]. For small size ratios (typically15): large beads are close to the bottom in a reversing position. The existence of circles with an intermediate radius shows that the segregation at an intermediate level within a flow is possible. In this paper, we experimentally study the segregation of particles of different densities and sizes in a half-filled rotating drum and other devices (chute flow, pile). In the drum, the location of the segregated ring continuously varies from the periphery to the center and is very sensitive to both the size (from 1 to 33) and density (from 0.36 to 4.8) ratios. The densest large beads segregate on a circle close to the center, the lightest large beads on a circle close to the periphery. Consequently, we found that for any tracer, its excess of mass, due to only a size excess, a density excess, or both, leads to a deep inside segregation of the tracer. There is a push-away process that makes heavy beads of any type go downwards, while the excess of size is already known to push large beads towards the surface, by a dynamical sieving process. Each segregation at an intermediate ring corresponds to a balance between these mass and geometrical effects. The segregation level in the flow is determined by the ratio of the intensities of both effects. △ Less

Submitted 30 July, 2004; v1 submitted 24 February, 2004; originally announced February 2004.

Comments: submitted to Physical Review E (february 2004)

Relation between dry granular flow regimes and morphology of deposits: formation of levees in pyroclastic deposits

Authors: Gwenaelle Felix, Nathalie Thomas

Abstract: Experiments on dry granular matter flowing down an inclined plane are performed in order to study the dynamics of dense pyroclastic flows. The plane is rough, and always wider than the flow, focusing this study on the case of laterally unconfined (free boundary) flows.We found that several flow regimes exist depending on the input fluxand on the inclination of the plane. Each flow regime corresp… ▽ More Experiments on dry granular matter flowing down an inclined plane are performed in order to study the dynamics of dense pyroclastic flows. The plane is rough, and always wider than the flow, focusing this study on the case of laterally unconfined (free boundary) flows.We found that several flow regimes exist depending on the input fluxand on the inclination of the plane. Each flow regime corresponds to a particular morphology of the associated deposit. In one of these regimes, the flow reaches a steady state, and the deposit exhibits a levee/channel morphology similar to those observed on small pyroclastic flow deposits. The levees result from the combination between lateral static zones on each border of the flow and the drainage of the central part of the flow after the supply stops. Particle segregation featuresare created during the flow, corresponding to those observed on the deposits of pyroclastic flows. Moreover, the measurements of the deposit morphology (thickness of the channel, height of the levees, width of the deposit) are quantitatively related to parameters of the dynamics of the flow (flux, velocity, height of the flow), leading to a way of studying the flow dynamics from only measurements of the deposit. Some attempts to make extensions to natural cases are discussed through experiments introducing the polydispersity of the particle sizes and the particle segregation process. △ Less

Submitted 30 July, 2004; v1 submitted 19 December, 2003; originally announced December 2003.

Journal ref: Earth and Planetary Science Letters 221 (2004) 197-213

Bragg spectroscopy with an accelerating Bose-Einstein condensate

Authors: R. Geursen, N. R. Thomas, A. C. Wilson

Abstract: We present the results of Bragg spectroscopy performed on an accelerating Bose-Einstein condensate. The Bose condensate undergoes circular micro-motion in a magnetic TOP trap and the effect of this motion on the Bragg spectrum is analyzed. A simple frequency modulation model is used to interpret the observed complex structure, and broadening effects are considered using numerical solutions to th… ▽ More We present the results of Bragg spectroscopy performed on an accelerating Bose-Einstein condensate. The Bose condensate undergoes circular micro-motion in a magnetic TOP trap and the effect of this motion on the Bragg spectrum is analyzed. A simple frequency modulation model is used to interpret the observed complex structure, and broadening effects are considered using numerical solutions to the Gross-Pitaevskii equation. △ Less

Submitted 26 August, 2003; v1 submitted 10 July, 2003; originally announced July 2003.

Comments: 5 pages, 3 figures, to appear in PRA. Minor changes to text and fig 2

Monodisperse Dry Granular Flows on Inclined Planes : Role of Roughness

Authors: C. Goujon, N. Thomas, B. Dalloz-Dubrujeaud

Abstract: Recent studies have pointed out the importance of the basal friction on the dynamics of granular flows. We present experimental results on the influence of the roughness of the inclined plane on the dynamics of a monodisperse dry granular flow. We found experimentally that it exists a maximum of the friction for a given relative roughness. This maximum is shown to be independent of the angle of… ▽ More Recent studies have pointed out the importance of the basal friction on the dynamics of granular flows. We present experimental results on the influence of the roughness of the inclined plane on the dynamics of a monodisperse dry granular flow. We found experimentally that it exists a maximum of the friction for a given relative roughness. This maximum is shown to be independent of the angle of the slope. This behavior is observed for four planes with different bump sizes (given by the size of the beads glued on the plane) from 200 microns to 2 mm. The relative roughness corresponding to the maximum of the friction can be predicted with a geometrical model of stability of one single bead on the plane. The main parameters are the size of the bumps and the size of the flowing beads. In order to obtain a higher precision, the model also takes into account of the spacing between the bumps of the rough plane. Experimental results and model are in good agreement for all the planes we studied. Other parameters, like the sphericity of the beads, or irregularities in the thickness of the layer of glued particles, are shown to be of influence on the friction. △ Less

Submitted 15 May, 2003; originally announced May 2003.

Comments: 17 pages, 15 figures, submitted to EPJ E

Double-well magnetic trap for Bose-Einstein condensates

Authors: N. R. Thomas, C. J. Foot, A. C. Wilson

Abstract: We present a magnetic trapping scheme for neutral atoms based on a hybrid of Ioffe-Pritchard and Time-averaged Orbiting Potential traps. The resulting double-well magnetic potential has readily controllable barrier height and well separation. This offers a new tool for studying the behavior of Bose condensates in double-well potentials, including atom interferometry and Josephson tunneling. We f… ▽ More We present a magnetic trapping scheme for neutral atoms based on a hybrid of Ioffe-Pritchard and Time-averaged Orbiting Potential traps. The resulting double-well magnetic potential has readily controllable barrier height and well separation. This offers a new tool for studying the behavior of Bose condensates in double-well potentials, including atom interferometry and Josephson tunneling. We formulate a description for the potential of this magnetic trap and discuss practical issues such as loading with atoms, evaporative cooling and manipulating the potential. △ Less

Submitted 9 August, 2001; originally announced August 2001.

Comments: 7 pages, 6 figures, Revtex 4

RF coupling of a Bose-Einstein condensate in a TOP trap

Authors: J. L. Martin, C. R. McKenzie, N. R. Thomas, D. M. Warrington, A. C. Wilson

Abstract: A radio frequency (RF) transition is used to convert a pure F=2,mF=2 87Rb Bose-Einstein condensate confined in a TOP trap to a mixture of F=2,mF=2 and F=2,mF=1 states. We show that the nature of this coupling process is strongly influenced by the presence of the time varying field of the TOP trap, and complicated by the presence of multiple Zeeman substates. In particular, the effective Rabi fre… ▽ More A radio frequency (RF) transition is used to convert a pure F=2,mF=2 87Rb Bose-Einstein condensate confined in a TOP trap to a mixture of F=2,mF=2 and F=2,mF=1 states. We show that the nature of this coupling process is strongly influenced by the presence of the time varying field of the TOP trap, and complicated by the presence of multiple Zeeman substates. In particular, the effective Rabi frequency associated with the applied RF field is not constant across the spatial extent of the cloud leading to a complex geometry for atom-laser output coupling and `averaging out' of Rabi oscillations. Further a time-varying detuning can give rise to complex spatial structures. △ Less

Submitted 11 April, 2000; v1 submitted 2 December, 1999; originally announced December 1999.

Comments: 10 pages, 6 figures, expanded content

Output coupling of a Bose-Einstein condensate formed in a TOP trap

Authors: J. L. Martin, C. R. McKenzie, N. R. Thomas, J. C. Sharpe, D. M. Warrington, P. J. Manson, W. J. Sandle, A. C. Wilson

Abstract: Two distinct mechanisms are investigated for transferring a pure 87Rb Bose-Einstein condensate in the F = 2, mF = 2 state into a mixture of condensates in all the mF states within the F = 2 manifold. Some of these condensates remain trapped whilst others are output coupled in the form of an elementary pulsed atom laser. Here we present details of the condensate preparation and results of the two… ▽ More Two distinct mechanisms are investigated for transferring a pure 87Rb Bose-Einstein condensate in the F = 2, mF = 2 state into a mixture of condensates in all the mF states within the F = 2 manifold. Some of these condensates remain trapped whilst others are output coupled in the form of an elementary pulsed atom laser. Here we present details of the condensate preparation and results of the two condensate output coupling schemes. The first scheme is a radio frequency technique which allows controllable transfer into available mF states, and the second makes use of Majorana spin flips to equally populate all the manifold sub-states. △ Less

Submitted 1 April, 1999; originally announced April 1999.

Comments: 12 Pages, 5 Figures, submitted to J. Phys. B

Journal ref: J. Phys. B 32 3065-3075 (1999)