-
Uncertainties in interfacial excess calculations from atom probe tomography data
Authors:
Levi Tegg,
Julie M. Cairney
Abstract:
Atom probe tomography can be used to measure the excess of solute chemical species at internal interfaces, but common protocols do not usually consider the compositional uncertainty of the (usually dilute) solute. Here, general models are derived for the composition profile of a solute segregated to the interface between two grains or phases. This model is fit to experimental data, with the cumula…
▽ More
Atom probe tomography can be used to measure the excess of solute chemical species at internal interfaces, but common protocols do not usually consider the compositional uncertainty of the (usually dilute) solute. Here, general models are derived for the composition profile of a solute segregated to the interface between two grains or phases. This model is fit to experimental data, with the cumulative compositional uncertainty included in the calculation of the interfacial excess. It is shown that the relative uncertainty in the interfacial excess can be large for dilute solutes, even when segregation is obvious in the concentration profile. Different methods for estimating the extent of the boundary provide different estimates for the interfacial excess and its uncertainty. Some strategies are provided for the minimisation of uncertainties in typical data, though ultimately, a typical calculation will be limited by compositional uncertainty arising from the relatively few solute counts in the region-of-interest.
△ Less
Submitted 3 October, 2024;
originally announced October 2024.
-
Analysis of water ice in nanoporous copper needles using cryo atom probe tomography
Authors:
Levi Tegg,
Ingrid E. McCarroll,
Se-Ho Kim,
Renelle Dubosq,
Eric V. Woods,
Ayman A. El-Zoka,
Baptiste Gault,
Julie M. Cairney
Abstract:
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion…
▽ More
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion beam milling reveal a hierarchical, dendritic, highly-wettable microstructure. The atom probe mass spectrum is dominated by peaks of Cu+ and H(H2O)n+ up to n <= 3, and the reconstructed volume shows the protrusion of a Cu ligament into an ice-filled pore. The continuous Cu ligament network electrically connects the apex to the cryostage, leading to enhanced electric field at the apex and increased cooling, both of which simplify the mass spectrum compared to previous reports.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Estimation of the electric field in atom probe tomography experiments using charge state ratios
Authors:
Levi Tegg,
Leigh T. Stephenson,
Julie M. Cairney
Abstract:
(Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variati…
▽ More
(Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variation in electric field with CSR. We find the variation in electric field with CSR is well-described by a simple two or three-parameter equation, and the model is accurate to most elements and charge states. The model is applied to experimental APT data of pure aluminium and a microalloyed steel, demonstrating that the methods described in this work can be easily applied to a variety of APT problems to understand electric field variations.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Nanoscale Analysis of Frozen Water by Atom Probe Tomography Using Graphene Encapsulation and Cryo-Workflows: A Parametric Study
Authors:
Florant Exertier,
Levi Tegg,
Adam Taylor,
Julie M. Cairney,
Jing Fu,
Ross K. W. Marceau
Abstract:
There has been an increasing interest in atom probe tomography (APT) to characterise hydrated and biological materials. A major benefit of APT compared to microscopy techniques more commonly used in biology is its combination of outstanding 3D spatial resolution (~0.2 nm) and mass sensitivity. APT has already been successfully used to characterise biological materials, revealing key structural inf…
▽ More
There has been an increasing interest in atom probe tomography (APT) to characterise hydrated and biological materials. A major benefit of APT compared to microscopy techniques more commonly used in biology is its combination of outstanding 3D spatial resolution (~0.2 nm) and mass sensitivity. APT has already been successfully used to characterise biological materials, revealing key structural information at the atomic scale, however there are many challenges inherent to the analysis of hydrated materials. New preparation protocols, often involving sample preparation and transfer at cryogenic temperature, enable APT analysis of hydrated materials and have the potential to enable 3D atomic scale characterisation of biological materials in the near-native hydrated state. In this study, APT specimens of pure water at the tips of tungsten needles were prepared at room temperature by graphene encapsulation. A parametric study was conducted where samples were transferred at either room temperature or cryo-temperature and analysed by APT by varying parameters such as the flight path and pulsing mode. The differences between the acquisition scenarios are presented along with recommendations for future studies.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.