-
Characterization of 3D printed micro-blades for cutting tissue-embedding material
Authors:
Saisneha Koppaka,
David Doan,
Wei Cai,
Wendy Gu,
Sindy K. Y. Tang
Abstract:
Cutting soft materials on the microscale has emerging applications in single-cell studies, tissue microdissection for organoid culture, drug screens, and other analyses. However, the cutting process is complex and remains incompletely understood. Furthermore, precise control over blade geometries, such as the blade tip radius, has been difficult to achieve. In this work, we use the Nanoscribe 3D p…
▽ More
Cutting soft materials on the microscale has emerging applications in single-cell studies, tissue microdissection for organoid culture, drug screens, and other analyses. However, the cutting process is complex and remains incompletely understood. Furthermore, precise control over blade geometries, such as the blade tip radius, has been difficult to achieve. In this work, we use the Nanoscribe 3D printer to precisely fabricate micro-blades (i.e., blades <1 mm in length) and blade grid geometries. This fabrication method enables a systematic study of the effect of blade geometry on the indentation cutting of paraffin wax, a common tissue-embedding material. First, we print straight micro-blades with tip radius ranging from ~100 nm to 10 um. The micro-blades are mounted in a custom nanoindentation setup to measure the cutting energy during indentation cutting of paraffin. Cutting energy, measured as the difference in dissipated energy between the first and second loading cycles, decreases as blade tip radius decreases, until ~357 nm when the cutting energy plateaus despite further decrease in tip radius. Second, we expand our method to blades printed in unconventional configurations, including parallel blade structures and blades arranged in a square grid. Under the conditions tested, the cutting energy scales approximately linearly with the total length of the blades comprising the blade structure. The experimental platform described can be extended to investigate other blade geometries and guide the design of microscale cutting of soft materials.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Collective Behavior of Crowded Drops in Microfluidic Systems
Authors:
Ya Gai,
Andrea Montessori,
Sauro Succi,
Sindy K. Y. Tang
Abstract:
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drop…
▽ More
Droplet microfluidics, in which micro-droplets serve as individual reactors, has enabled a wide range of high-throughput biochemical processes. Unlike solid wells typically used in current biochemical assays, droplets are subject to instability and can undergo breakup, especially under fast flow conditions. Although the physics of single drops has been studied extensively, the flow of crowded drops or concentrated emulsions, where droplet volume fraction exceeds 80 percent, is relatively unexplored in microfluidics. In this article and the related invited lecture from the 74th Annual Meeting of the American Physical Society's Division of Fluid Dynamics, we describe the collective behavior of drops in a concentrated emulsion by tracking the dynamics and the fate of individual drops within the emulsion. At the slow flow limit of the concentrated emulsion, we observe an unexpected order, where the velocity of individual drops in the emulsion exhibits spatiotemporal periodicity. As the flow rate increases, the emulsion transitions from a solid-like to a liquid-like material, and the spatiotemporal order in the flow is lost. At the fast flow limit, droplet breakup starts to occur. We show that droplet breakup within the emulsion follows a probability distribution, in stark contrast to the deterministic behavior in classical single-drop studies. In addition to capillary number and viscosity ratio, break-up probability is governed by a confinement factor that measures drop size relative to a characteristic channel length. The breakup probability arises from the time-varying packing configuration of the drops. Finally, we discuss recent progress in computation methods for recapitulating the flow of concentrated emulsions.
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
High-Q, low index-contrast polymeric photonic crystal nanobeam cavities
Authors:
Qimin Quan,
Ian B. Burgess,
Sindy K. Y. Tang,
Daniel L. Floyd,
Marko Loncar
Abstract:
We present the design, fabrication and characterization of high-\emph{Q} (\emph{Q}=36,000) polymeric photonic crystal nanobeam cavities made of two polymers that have an ultra-low index contrast (ratio=1.15) and observed thermo-optical bistability at hundred microwatt power level. Due to the extended evanescent field and small mode volumes, polymeric nanobeam cavities are ideal platform for ultra-…
▽ More
We present the design, fabrication and characterization of high-\emph{Q} (\emph{Q}=36,000) polymeric photonic crystal nanobeam cavities made of two polymers that have an ultra-low index contrast (ratio=1.15) and observed thermo-optical bistability at hundred microwatt power level. Due to the extended evanescent field and small mode volumes, polymeric nanobeam cavities are ideal platform for ultra-sensitive biochemical sensing. We demonstrate that these sensors have figures of merit (FOM=9190) two orders of magnitude greater than surface plasmon resonance based sensors, and outperform the commercial Biacore$^{\mathrm{TM}}$ sensors. The demonstration of high-Q cavity in low-index-contrast polymers can open up versatile applications using a broad range of functional and flexible polymeric materials.
△ Less
Submitted 12 August, 2011;
originally announced August 2011.
