Showing 1–24 of 24 results for author: Tóth, B

THz spin-wave excitations in the transverse conical phase of BiFeO$_3$

Authors: B. Tóth, D. G. Farkas, K. Amelin, T. Rõõm, U. Nagel, L. Udvardi, L. Szunyogh, L. Rózsa, T. Ito, S. Bordács

Abstract: Although BiFeO$_3$ is one of the most studied multiferroic materials, recent magnetization and neutron scattering studies have revealed a new magnetic phase in this compound - the transverse conical phase. To study the collective spin excitations of this phase, we performed THz spectroscopy in magnetic fields up to 17 T at and above room temperature. We observed five spin-wave branches in the magn… ▽ More Although BiFeO$_3$ is one of the most studied multiferroic materials, recent magnetization and neutron scattering studies have revealed a new magnetic phase in this compound - the transverse conical phase. To study the collective spin excitations of this phase, we performed THz spectroscopy in magnetic fields up to 17 T at and above room temperature. We observed five spin-wave branches in the magnetic phase with long wavelength conical modulation. Using a numerical spin dynamics model we found two kinds of excitations with magnetic moments oscillating either along or perpendicular to the static fields. Remarkably, we detected strong directional dichroism, an optical manifestation of the magnetoelectric effect, for two spin-wave modes of the conical phase. According to our experiments, the stability of the conical state is sensitive to the magnetic field history and it can become (meta)stable at or close to zero magnetic field, which may allow exploiting its magnetoelectric properties at room temperature. △ Less

Submitted 2 February, 2024; originally announced February 2024.

Spin excitations in the magnetically ordered phases of MnSc$_2$S$_4$

Authors: B. Tóth, K. Amelin, T. Rõõm, U. Nagel, V. Tsurkan, L. Prodan, I. Kézsmárki, S. Bordács

Abstract: Recent neutron scattering experiments suggested that frustrated magnetic interactions give rise to antiferromagnetic spiral and fractional skyrmion lattice phases in MnSc$_2$S$_4$. Here, to trace the signatures of these modulated phases, we studied the spin excitations of MnSc$_2$S$_4$ by THz spectroscopy at 300 mK up to 12 T. We found a single magnetic resonance with linearly increasing frequency… ▽ More Recent neutron scattering experiments suggested that frustrated magnetic interactions give rise to antiferromagnetic spiral and fractional skyrmion lattice phases in MnSc$_2$S$_4$. Here, to trace the signatures of these modulated phases, we studied the spin excitations of MnSc$_2$S$_4$ by THz spectroscopy at 300 mK up to 12 T. We found a single magnetic resonance with linearly increasing frequency in field. The corresponding $g$-factor of Mn$^{2+}$ ions $g$ = 1.96, and the absence of other resonances imply very weak anisotropies and negligible contribution of higher harmonics to the spiral state. The significant difference between the dc magnetic susceptibility and the lowest-frequency ac susceptibility in our experiment implies the existence of mode(s) below 100 GHz. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Microfounding GARCH Models and Beyond: A Kyle-inspired Model with Adaptive Agents

Authors: Michele Vodret, Iacopo Mastromatteo, Bence Toth, Michael Benzaquen

Abstract: We relax the strong rationality assumption for the agents in the paradigmatic Kyle model of price formation, thereby reconciling the framework of asymmetrically informed traders with the Adaptive Market Hypothesis, where agents use inductive rather than deductive reasoning. Building on these ideas, we propose a stylised model able to account parsimoniously for a rich phenomenology, ranging from ex… ▽ More We relax the strong rationality assumption for the agents in the paradigmatic Kyle model of price formation, thereby reconciling the framework of asymmetrically informed traders with the Adaptive Market Hypothesis, where agents use inductive rather than deductive reasoning. Building on these ideas, we propose a stylised model able to account parsimoniously for a rich phenomenology, ranging from excess volatility to volatility clustering. While characterising the excess-volatility dynamics, we provide a microfoundation for GARCH models. Volatility clustering is shown to be related to the self-excited dynamics induced by traders' behaviour, and does not rely on clustered fundamental innovations. Finally, we propose an extension to account for the fragile dynamics exhibited by real markets during flash crashes. △ Less

Submitted 14 June, 2022; originally announced June 2022.

Comments: 20 pages, 8 figures

Do fundamentals shape the price response? A critical assessment of linear impact models

Authors: Michele Vodret, Iacopo Mastromatteo, Bence Tóth, Michael Benzaquen

Abstract: We compare the predictions of the stationary Kyle model, a microfounded multi-step linear price impact model in which market prices forecast fundamentals through information encoded in the order flow, with those of the propagator model, a purely data-driven model in which trades mechanically impact prices with a time-decaying kernel. We find that, remarkably, both models predict the exact same pri… ▽ More We compare the predictions of the stationary Kyle model, a microfounded multi-step linear price impact model in which market prices forecast fundamentals through information encoded in the order flow, with those of the propagator model, a purely data-driven model in which trades mechanically impact prices with a time-decaying kernel. We find that, remarkably, both models predict the exact same price dynamics at high frequency, due to the emergence of universality at small time scales. On the other hand, we find those models to disagree on the overall strength of the impact function by a quantity that we are able to relate to the amount of excess-volatility in the market. We reveal a crossover between a high-frequency regime in which the market reacts sub-linearly to the signed order flow, to a low-frequency regime in which prices respond linearly to order flow imbalances. Overall, we reconcile results from the literature on market microstructure (sub-linearity in the price response to traded volumes) with those relating to macroeconomically relevant timescales (in which a linear relation is typically assumed). △ Less

Submitted 8 December, 2021; originally announced December 2021.

A Stationary Kyle Setup: Microfounding propagator models

Authors: Michele Vodret, Iacopo Mastromatteo, Bence Tóth, Michael Benzaquen

Abstract: We provide an economically sound micro-foundation to linear price impact models, by deriving them as the equilibrium of a suitable agent-based system. Our setup generalizes the well-known Kyle model, by dropping the assumption of a terminal time at which fundamental information is revealed so to describe a stationary market, while retaining agents' rationality and asymmetric information. We invest… ▽ More We provide an economically sound micro-foundation to linear price impact models, by deriving them as the equilibrium of a suitable agent-based system. Our setup generalizes the well-known Kyle model, by dropping the assumption of a terminal time at which fundamental information is revealed so to describe a stationary market, while retaining agents' rationality and asymmetric information. We investigate the stationary equilibrium for arbitrary Gaussian noise trades and fundamental information, and show that the setup is compatible with universal price diffusion at small times, and non-universal mean-reversion at time scales at which fluctuations in fundamentals decay. Our model provides a testable relation between volatility of prices, magnitude of fluctuations in fundamentals and level of volume traded in the market. △ Less

Submitted 7 February, 2021; v1 submitted 20 November, 2020; originally announced November 2020.

Comments: 25 pages, 8 figures, added references

Zooming In on Equity Factor Crowding

Authors: Valerio Volpati, Michael Benzaquen, Zoltan Eisler, Iacopo Mastromatteo, Bence Toth, Jean-Philippe Bouchaud

Abstract: Crowding is most likely an important factor in the deterioration of strategy performance, the increase of trading costs and the development of systemic risk. We study the imprints of \emph{crowding} on both anonymous market data and a large database of metaorders from institutional investors in the U.S. equity market. We propose direct metrics of crowding that capture the presence of investors con… ▽ More Crowding is most likely an important factor in the deterioration of strategy performance, the increase of trading costs and the development of systemic risk. We study the imprints of \emph{crowding} on both anonymous market data and a large database of metaorders from institutional investors in the U.S. equity market. We propose direct metrics of crowding that capture the presence of investors contemporaneously trading the same stock in the same direction by looking at fluctuations of the imbalances of trades executed on the market. We identify significant signs of crowding in well known equity signals, such as Fama-French factors and especially Momentum. We show that the rebalancing of a Momentum portfolio can explain between 1-2\% of order flow, and that this percentage has been significantly increasing in recent years. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Comments: 7 pages, 5 figures

Structure and Giant Magnetoresistance of Electrodeposited Co/Cu Multilayers Prepared by Two-Pulse (G/P) and Three-Pulse (G/P/G) Plating

Authors: N. Rajasekaran, L. Pogány, Á. Révész, B. G. Tóth, S. Mohan, L. Péter, I. Bakonyi

Abstract: The giant magnetoresistance (GMR) was investigated for electrodeposited Co/Cu multilayers. In order to better understand the formation of individual layers and their influence on GMR, multilayers produced by two different deposition strategies were compared. One series of Co(2 nm)/Cu(tCu) multilayers with tCu ranging from 0.5 nm to 6 nm was produced with the conventional two-pulse plating by using… ▽ More The giant magnetoresistance (GMR) was investigated for electrodeposited Co/Cu multilayers. In order to better understand the formation of individual layers and their influence on GMR, multilayers produced by two different deposition strategies were compared. One series of Co(2 nm)/Cu(tCu) multilayers with tCu ranging from 0.5 nm to 6 nm was produced with the conventional two-pulse plating by using a galvanostatic/potentiostatic (G/P) pulse combination for the magnetic/non-magnetic layer deposition, respectively, whereby the Cu layer deposition was carried out at the electrochemically optimized potential. Another Co(2 nm)/Cu(tCu) multilayer series with the same tCu range was prepared with the help of a G/P/G pulse combination. In this latter case, first a bilayer of Co(2 nm)/Cu(6 nm) was deposited in each cycle as in the G/P mode after which a third G pulse was applied with a small anodic current to dissolve part of the 6 nm thick Cu layer in order to ensure the targeted tCu value. The comparison of the two series revealed that the G/P/G pulse combination yields multilayers for which GMR can be obtained even at such low nominal Cu layer thicknesses where G/P multilayers already exhibit bulk-like anisotropic magnetoresistance only. Surface roughness measurements by atomic force microscopy revealed that the two kinds of pulse combination yield different surface roughness values which correlate with the structural quality of the multilayers as indicated by the absence or presence of multilayer satellite reflections in the X-ray diffraction patterns. The results of multilayer chemical analysis revealed that mainly an increased Cu content of the magnetic layer is responsible for the onset of SPM regions in the form of Co segregations in the G/P/G multilayers with small Cu layer thicknesses. △ Less

Submitted 17 April, 2017; originally announced April 2017.

Comments: 32 pages, 10 figures

Journal ref: Journal of the Electrochemical Society 161 (6), D339-D348 (2014)

Electrodeposition of Ni from Various Non-Aqueous Media: The Case of Alcoholic Solutions

Authors: K. Neuróhr, L. Pogány, B. G. Tóth, Á. Révész, I. Bakonyi, L. Péter

Abstract: Although electrodeposition from aqueous media has been widely used to obtain metallic deposits, there are cases where the application of non-aqueous solutions offers advantages over the traditional baths or even represents the only way to electrodeposit some metals. For this reason, a study of the electrodeposition of Ni from various alcoholic solutions was performed. Apart from a detailed cyclic… ▽ More Although electrodeposition from aqueous media has been widely used to obtain metallic deposits, there are cases where the application of non-aqueous solutions offers advantages over the traditional baths or even represents the only way to electrodeposit some metals. For this reason, a study of the electrodeposition of Ni from various alcoholic solutions was performed. Apart from a detailed cyclic voltammetry study of these solutions, the surface morphology, crystal structure and texture as well magnetic properties of the deposits have also been investigated. The best results were obtained with methanol as solvent, so results on Ni deposits prepared from this solution will be presented in more detail whereas the case of the other alcoholic solutions investigated will be summarized only briefly. Structural and magnetic properties of the deposits obtained have been compared to literature data on Ni samples obtained from various non-aqueous solvents. △ Less

Submitted 4 April, 2017; originally announced April 2017.

Comments: 27 pages, 9 figures

Journal ref: Journal of the Electrochemical Society 162 (7), D256-D264 (2015)

Characterization of Defect Structure in Electrodeposited Nanocrystalline Ni Films

Authors: Tamás Kolonits, Péter Jenei, Bence G. Tóth, Zsolt Czigány, Jenő Gubicza, László Péter, Imre Bakonyi

Abstract: The microstructure of electrodeposited Ni films produced without and with organic additives (saccharin and formic acid) was investigated by X-ray diffraction (XRD) line profile analysis and cross-sectional transmission electron microscopy (TEM). Whereas the general effect of these additives on the microstructure (elimination of columnar growth as well as grain refinement) was reproduced, the prono… ▽ More The microstructure of electrodeposited Ni films produced without and with organic additives (saccharin and formic acid) was investigated by X-ray diffraction (XRD) line profile analysis and cross-sectional transmission electron microscopy (TEM). Whereas the general effect of these additives on the microstructure (elimination of columnar growth as well as grain refinement) was reproduced, the pronounced intention of this study was to compare the results of various seldom-used high-performance structural characterization methods on identical electrodeposited specimens in order to reveal fine details of structural changes qualitatively not very common in this field. In the film deposited without additives, a columnar structure was observed showing similarities to the T-zone of structure zone models. Both formic acid and saccharin additives resulted in equiaxed grains with reduced size, as well as increased dislocation and twin fault densities in the nanocrystalline films. Moreover, the structure became homogeneous and free of texture within the total film thickness due to the additives. Saccharin yielded smaller grain size and larger defect density than formic acid. A detailed analysis of the grain size and twin boundary spacing distributions was carried out with the complementary application of TEM and XRD, by carefully distinguishing between the TEM and XRD grain sizes. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 26 pages, 11 figures

Journal ref: Journal of the Electrochemical Society 163 (3), D107-D114 (2016)

The short-term price impact of trades is universal

Authors: Bence Toth, Zoltan Eisler, Jean-Philippe Bouchaud

Abstract: We analyze a proprietary dataset of trades by a single asset manager, comparing their price impact with that of the trades of the rest of the market. In the context of a linear propagator model we find no significant difference between the two, suggesting that both the magnitude and time dependence of impact are universal in anonymous, electronic markets. This result is important as optimal execut… ▽ More We analyze a proprietary dataset of trades by a single asset manager, comparing their price impact with that of the trades of the rest of the market. In the context of a linear propagator model we find no significant difference between the two, suggesting that both the magnitude and time dependence of impact are universal in anonymous, electronic markets. This result is important as optimal execution policies often rely on propagators calibrated on anonymous data. We also find evidence that in the wake of a trade the order flow of other market participants first adds further copy-cat trades enhancing price impact on very short time scales. The induced order flow then quickly inverts, thereby contributing to impact decay. △ Less

Submitted 2 January, 2018; v1 submitted 26 February, 2017; originally announced February 2017.

Comments: 7 pages, 5 figures

Giant magnetoresistance and structure of electrodeposited Co/Cu multilayers: the influence of layer thicknesses and Cu deposition potential

Authors: N. Rajasekaran, J. Mani, B. G. Tóth, G. Molnár, S. Mohan, L. Péter, I. Bakonyi

Abstract: The giant magnetoresistance (GMR) and structure was investigated for electrodeposited Co/Cu multilayers prepared by a conventional galvanostatic/potentiostatic pulse combination from a pure sulfate electrolyte with various layer thicknesses, total multilayer thickness and Cu deposition potential. X-ray diffraction (XRD) measurements revealed superlattice satellite reflections for many of the multi… ▽ More The giant magnetoresistance (GMR) and structure was investigated for electrodeposited Co/Cu multilayers prepared by a conventional galvanostatic/potentiostatic pulse combination from a pure sulfate electrolyte with various layer thicknesses, total multilayer thickness and Cu deposition potential. X-ray diffraction (XRD) measurements revealed superlattice satellite reflections for many of the multilayers having sufficiently large thickness (at least 2 nm) of both constituent layers. The bilayer repeats derived from the positions of the visible superlattice reflections were typically 10-20% higher than the nominal values.The observed GMR was found to be dominated by the multilayer-like ferromagnetic (FM) contribution even for multilayers without visible superlattice satellites. There was always also a modest superparamagnetic (SPM) contribution to the GMR and this term was the largest for multilayers with very thin (0.5 nm) magnetic layers containg apparently a small amount of magnetically decoupled SPM regions. No oscillatory GMR behavior with spacer thickness was observed at any magnetic layer thickness. The saturation of the coercivity as measured by the peak position of the MR(H) curves indicated a complete decoupling of magnetic layers for large spacer thicknesses. The GMR increased with total multilayer thickness which could be ascribed to an increasing SPM contribution to the GMR due to an increasing surface roughness, also indicated by the increasing coercivity. For multilayers with Cu layers deposited at more and more positive potentials, the GMRFM term increased and the GMRSPM term decreased. At the same time, a corresponding reduction of surface roughness measured with atomic force microscopy indicated an improvement of the multilayer structural quality which was, however, not accompanied by an increase of the superlattice reflection intensities. △ Less

Submitted 3 February, 2017; originally announced February 2017.

Comments: 29 pages, 10 figures

Journal ref: Journal of the Electrochemical Society 162 (6), D204-D212 (2015)

Thermoelectric power factor enhancement by spin-polarized currents - a nanowire case study

Authors: Anna Corinna Niemann, Tim Böhnert, Ann-Kathrin Michel, Svenja Bäßler, Bernd Gotsmann, Katalin Neuróhr, Bence Tóth, László Péter, Imre Bakonyi, Victor Vega, Victor M. Prida, Johannes Gooth, Kornelius Nielsch

Abstract: Thermoelectric (TE) measurements have been performed on the workhorses of today's data storage devices, exhibiting either the giant or the anisotropic magnetoresistance effect (GMR and AMR). The temperature-dependent (50-300 K) and magnetic field-dependent (up to 1 T) TE power factor (PF) has been determined for several Co-Ni alloy nanowires with varying Co:Ni ratios as well as for Co-Ni/Cu multil… ▽ More Thermoelectric (TE) measurements have been performed on the workhorses of today's data storage devices, exhibiting either the giant or the anisotropic magnetoresistance effect (GMR and AMR). The temperature-dependent (50-300 K) and magnetic field-dependent (up to 1 T) TE power factor (PF) has been determined for several Co-Ni alloy nanowires with varying Co:Ni ratios as well as for Co-Ni/Cu multilayered nanowires with various Cu layer thicknesses, which were all synthesized via a template-assisted electrodeposition process. A systematic investigation of the resistivity, as well as the Seebeck coefficient, is performed for Co-Ni alloy nanowires and Co-Ni/Cu multilayered nanowires. At room temperature, measured values of TE PFs up to 3.6 mWK-2m-1 for AMR samples and 2.0 mWK-2m-1 for GMR nanowires are obtained. Furthermore, the TE PF is found to increase by up to 13.1 % for AMR Co-Ni alloy nanowires and by up to 52 % for GMR Co-Ni/Cu samples in an external applied magnetic field. The magnetic nanowires exhibit TE PFs that are of the same order of magnitude as TE PFs of Bi-Sb-Se-Te based thermoelectric materials and, additionally, give the opportunity to adjust the TE power output to changing loads and hotspots through external magnetic fields. △ Less

Submitted 2 January, 2017; originally announced January 2017.

Comments: 25 pages, 5 figures

Journal ref: Advanced Electronic Materials 2 (9), Paper 1600058. (2016)

Magnetothermopower and magnetoresistance of single Co-Ni/Cu multilayered nanowires

Authors: Tim Böhnert, Anna Corinna Niemann, Ann-Kathrin Michel, Svenja Bäßler, Johannes Gooth, Bence G. Tóth, Katalin Neuróhr, László Péter, Imre Bakonyi, Victor Vega, Victor M. Prida, Kornelius Nielsch

Abstract: The magnetothermopower and the magnetoresistance of single Co Ni/Cu multilayered nan-owires with various thicknesses of the Cu spacer are investigated. Both kinds of measurement have been performed as a function of temperature (50 K to 325 K) and under applied magnetic fields perpendicular to the nanowire axis, with magnitudes up to 15 % at room temperature. A linear relation between thermopower S… ▽ More The magnetothermopower and the magnetoresistance of single Co Ni/Cu multilayered nan-owires with various thicknesses of the Cu spacer are investigated. Both kinds of measurement have been performed as a function of temperature (50 K to 325 K) and under applied magnetic fields perpendicular to the nanowire axis, with magnitudes up to 15 % at room temperature. A linear relation between thermopower S and electrical conductivity σ of the nanowires is found, with the magnetic field as an implicit variable. Combining the linear behavior of the S vs. σ and the Mott formula, the energy derivative of the resistivity has been determined. In order to extract the true nanowire materials parameters from the measured thermopower, a simple model based on the Mott formula is employed to distinguish the individual thermopower contributions of the sample. By assuming that the non-diffusive thermopower contributions of the nanowire can be neglected, it was found that the magnetic field induced changes of thermopower and resistivity are equivalent. The emphasis in the present paper is on the comparison of the magnetoresistance and magnetothermopower results and it is found that the same correlation is valid between the two sets of data for all samples, irrespective of the relative importance of the giant magnetoresistance or anisotropic magnetoresistance contributions in the various individual nanowires. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 28 pages, 7 figures

Journal ref: Physical Review B 90, 165416 (2014)

Giant magnetoresistance in electrodeposited Co-Cu/Cu multilayers: origin of absence of oscillatory behaviour

Authors: I. Bakonyi, E. Simon, B. G. Tóth, L. Péter, L. F. Kiss

Abstract: A detailed study of the evolution of the magnetoresistance was performed on electrodeposited Co/Cu multilayers with Cu layer thicknesses ranging from 0.5 nm to 4.5 nm. For thin Cu layers (up to 1.5 nm), anisotropic magnetoresistance (AMR) was observed whereas multilayers with thicker Cu layers exhibited clear giant magnetoresistance (GMR) behaviour. The GMR magnitude increased up to about 3.5 to 4… ▽ More A detailed study of the evolution of the magnetoresistance was performed on electrodeposited Co/Cu multilayers with Cu layer thicknesses ranging from 0.5 nm to 4.5 nm. For thin Cu layers (up to 1.5 nm), anisotropic magnetoresistance (AMR) was observed whereas multilayers with thicker Cu layers exhibited clear giant magnetoresistance (GMR) behaviour. The GMR magnitude increased up to about 3.5 to 4 nm Cu layer thickness and slightly decreased afterwards. According to magnetic measurements, all samples exhibited ferromagnetic (FM) behaviour. The relative remanence turned out to be about 0.75 for both AMR and GMR type multilayers. This clearly indicates the absence of an antiferromagnetic (AF) coupling between adjacent magnetic layers for Cu layers even above 1.5 nm where the GMR effect occurs. The AMR behaviour at low spacer thicknesses indicates the presence of strong FM coupling (due to, e.g., pin-holes in the spacer and/or areas of the Cu layer where the layer thickness is very small). With increasing spacer thickness, the pin-hole density reduces and/or the layer thickness uniformity improves which both lead to a weakening of the FM coupling. This improvement in multilayer structure quality results in a better separation of magnetic layers and the weaker coupling (or complete absence of interlayer coupling) enables a more random magnetization orientation of adjacent layers, all this leading to an increase of the GMR. Coercive field and zero-field resistivity measurements as well as the results of a structural study reported earlier on the same multilayers provide independent evidence for the microstructural features established here. The large GMR reported previously on such Co/Cu multilayers at Cu layer thicknesses around 1 nm can be attributed to the presence of a fairly large superparamagnetic (SPM) fraction rather than being due to a strong AF coupling. △ Less

Submitted 8 November, 2016; originally announced November 2016.

Comments: 24 pages, 6 figures

Journal ref: Physical Review B 79, 174421 (2009)

Preparation, structure and giant magnetoresistance of electrodeposited Fe Co/Cu multilayers

Authors: B. G. Tóth, L. Péter, L. Pogány, Á. Révész, I. Bakonyi

Abstract: No systematic studies have been carried out on the giant magnetoresistance (GMR) of electrodeposited (ED) Fe-Co/Cu multilayers since the elaboration of a method for the optimization of the Cu layer deposition potential. In this paper, we present results on the electrochemical optimization of the Cu layer deposition potential which was found to depend on the relative iron concentration in the bath.… ▽ More No systematic studies have been carried out on the giant magnetoresistance (GMR) of electrodeposited (ED) Fe-Co/Cu multilayers since the elaboration of a method for the optimization of the Cu layer deposition potential. In this paper, we present results on the electrochemical optimization of the Cu layer deposition potential which was found to depend on the relative iron concentration in the bath. An X-ray diffraction study of ED Fe5Co95(1.5 nm)/Cu(dCu) multilayers with dCu ranging from 0.8 nm to 10 nm revealed an fcc structure. For most of the multilayers, a weak superlattice satellite reflection could be identified. The room-temperature magnetoresistance was studied in detail as a function of the individual layer thicknesses. Multilayers with Cu layer thicknesses above about 1.5 nm were found to exhibit a GMR behavior with a maximum GMR of about 5 % and a typical saturation field of 1 kOe. The GMR magnitude decreased with increasing Fe-content in the magnetic layer. The spacer layer thickness evolution of the MR data was established in detail after separating the ferromagnetic and superparamagnetic GMR contributions and no oscillatory GMR was found. A comparison with literature data on both physically deposited and ED Fe-Co/Cu multilayers is also made. △ Less

Submitted 18 October, 2016; originally announced October 2016.

Comments: 22 pages, 9 figures

Journal ref: Jornal of the Electrochemical Society 161 (4), D154-D162 (2014)

Magnetoresistance and surface roughness study of electrodeposited Ni50Co50/Cu multilayers

Authors: B. G. Tóth, L. Péter, J. Dégi, I. Bakonyi

Abstract: Room-temperature transport properties (the zero-field resistivity, ρ0, and the GMR) were studied for ED Ni50Co50/Cu multilayers as a function of the individual layer thicknesses and total multilayer thickness. The Cu deposition potential was optimized in order to obtain the preset layer thicknesses. The surface roughness development was studied by AFM, which revealed an exponential roughening with… ▽ More Room-temperature transport properties (the zero-field resistivity, ρ0, and the GMR) were studied for ED Ni50Co50/Cu multilayers as a function of the individual layer thicknesses and total multilayer thickness. The Cu deposition potential was optimized in order to obtain the preset layer thicknesses. The surface roughness development was studied by AFM, which revealed an exponential roughening with total thickness. The Cu layer thickness strongly influenced the roughness evolution. As expected, ρ0 decreased with increasing Cu layer thickness whereas it increased strongly for large total multilayer thicknesses that could be ascribed to the observed deposit roughening. All multilayers with Cu layer thicknesses above about 1.5 nm exhibited a GMR behavior with a maximum GMR of about 5 %. The GMR decreased for total multilayer thicknesses above about 300 nm due to the strong increase of ρ0, the latter caused by the enhanced roughness. The GMR data indicated the appearance of a current at angle to plane type scattering due to the layer undulations. The thickness evolution of the MR data was analyzed in detail after separating the ferromagnetic and superparamagnetic GMR contributions. It could be established that ED Ni-Co/Cu multilayers do not exhibit an oscillatory GMR behavior with spacer thickness. △ Less

Submitted 20 September, 2016; originally announced September 2016.

Comments: 27 pages, 11 figures

Journal ref: Journal of the Electrochemical Society 160 (8), D307-D314 (2013)

Influence of Cu deposition potential on the giant magnetoresistance and surface roughness of electrodeposited Ni-Co/Cu multilayers

Authors: B. G. Tóth, L. Péter, J. Dégi, Á. Révész, D. Oszetzky, G. Molnár, I. Bakonyi

Abstract: It has been shown previously for electrodeposited Co/Cu multilayers that the single-bath electrodeposition process can be optimized from an electrochemical point of view in order to avoid unwanted Co dissolution and incorporation of Co in the non-magnetic layer during the Cu deposition pulse. In the present work, electrodeposition of Ni-Co/Cu multilayers has been studied to clarify if the same opt… ▽ More It has been shown previously for electrodeposited Co/Cu multilayers that the single-bath electrodeposition process can be optimized from an electrochemical point of view in order to avoid unwanted Co dissolution and incorporation of Co in the non-magnetic layer during the Cu deposition pulse. In the present work, electrodeposition of Ni-Co/Cu multilayers has been studied to clarify if the same optimization method is appropriate when two magnetic elements are present and if this potential results in the largest giant magnetoresistance (GMR) for the particular alloy system studied. For this purpose, several Ni-Co/Cu multilayers were prepared by varying the deposition potential of the Cu layer. The composition analysis of the deposits showed that the Ni:Co ratio exhibits a minimum as a function of the Cu deposition potential, which can be explained by considering both the dissolution of Co and the mass transport of the reactants. Both the saturation GMR value and the intensity of the satellite peaks in the X-ray diffractograms were highly correlated with the resulting surface roughness of the deposits which was strongly varying with the Cu deposition potential. Higher GMR values, lower saturation fields and more perfect multilayer structure were observed for sufficiently positive Cu deposition potentials only which enabled a partial Co dissolution resulting in a reduced surface roughness. The results draw attention to the complexity of the optimization procedure of the deposition of multilayers with several alloying components. △ Less

Submitted 2 September, 2016; originally announced September 2016.

Comments: 26 pages, 10 figures

Journal ref: Electrochimica Acta 91, 122-129 (2013)

Magnetoresistance and surface roughness study of the initial growth of electrodeposited Co/Cu multilayers

Authors: B. G. Tóth, L. Péter, I. Bakonyi

Abstract: The giant magnetoresistance (GMR) effect has been widely investigated on electrodeposited ferromagnetic/non-magnetic (FM/NM) multilayers generally containing a large number of bilayers. In most applications of the GMR effect, layered structures consisting of a relatively small number of consecutive FM and NM layers are used. It is of great interest, therefore, to investigate the initial stages of… ▽ More The giant magnetoresistance (GMR) effect has been widely investigated on electrodeposited ferromagnetic/non-magnetic (FM/NM) multilayers generally containing a large number of bilayers. In most applications of the GMR effect, layered structures consisting of a relatively small number of consecutive FM and NM layers are used. It is of great interest, therefore, to investigate the initial stages of GMR multilayer film growth by electrodeposition. In the present work we have extended our previous studies on ED GMR multilayers to layered structures with a total thickness ranging from a few nanometers up to 70 nm. The evolution of the surface roughness and electrical transport properties of such ultrathin ED Co/Cu layered structures was investigated. Various layer combinations were produced including both Co and Cu either as starting or top layers in order (i) to see differences in the nucleation of the first layer and (ii) to trace out the effect of the so called exchange reaction. Special attention was paid to measure the field dependence of the magnetoresistance, MR(H) in order to derive information for the appearance of superparamagnetic regions in the magnetic layers. This proved to be helpful for monitoring the evolution of the layer microstructure at each step of the deposition sequence. △ Less

Submitted 14 August, 2016; originally announced August 2016.

Comments: 29 pages, 12 figures

Journal ref: Journal of the Electrochemical Society 158 (11), D671-D680 (2011)

Temperature dependence of the electrical resistivity and the anisotropic magnetoresistance (AMR) of electrodeposited Ni Co alloys

Authors: B. G. Tóth, L. Péter, Á. Révész, J. Pádár, I. Bakonyi

Abstract: The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers with evaporated Cr and Cu underlayers. The alloy composition was varied in the whole concentration range by varying the ratio of Ni sulfate and Co sulfate in th… ▽ More The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers with evaporated Cr and Cu underlayers. The alloy composition was varied in the whole concentration range by varying the ratio of Ni sulfate and Co sulfate in the electrolyte. The Ni Co alloy deposits were investigated first in the as deposited state on the substrates and then, by mechanically stripping them from the substrates, as self supporting layers both without and after annealing. According to an X ray diffraction study, a strongly textured face centered cubic (fcc) structure was formed in the as deposited state with an average grain size of about 10 nm. Upon annealing, the crystal structure was retained whereas the grain size increased by a factor of 3 to 5, depending on alloy composition. The zero field resistivity decreased strongly by annealing due to the increased grain size. The annealing hardly changed the AMR below 50 at.% Co but strongly decreased it above this concentration. The composition dependence of the resistivity and the AMR of the annealed Ni Co alloy deposits was in good quantitative agreement with the available literature data both at 13 K and at room temperature. Both transport parameters were found to exhibit a pronounced maximum in the composition range between 20 and 30 at.% Co and the data of the Ni Co alloys fit well to the limiting values of the pure component metals (fcc Ni and fcc Co). The only theoretical calculation reported formerly on fcc Ni Co alloys yielded at T=0K a resistivity value smaller by a factor of 5 and an AMR value larger by a factor of about 2 than the corresponding low temperature experimental data, although the theoretical results properly reproduced the composition dependence of both quantities. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Comments: 27 pages, 10 figures

Journal ref: European Physical Journal B 75, 167-177 (2010)

Coexistence of shocks and rarefaction fans: complex phase diagram of a simple hyperbolic particle system

Authors: Márton Balázs, Attila László Nagy, Bálint Tóth, István Tóth

Abstract: This paper investigates the non-equilibrium hydrodynamic behavior of a simple totally asymmetric interacting particle system of particles, antiparticles and holes on $\mathbb{Z}$. Rigorous hydrodynamic results apply to our model with a hydrodynamic flux that is exactly calculated and shown to change convexity in some region of the model parameters. We then characterize the entropy solutions of the… ▽ More This paper investigates the non-equilibrium hydrodynamic behavior of a simple totally asymmetric interacting particle system of particles, antiparticles and holes on $\mathbb{Z}$. Rigorous hydrodynamic results apply to our model with a hydrodynamic flux that is exactly calculated and shown to change convexity in some region of the model parameters. We then characterize the entropy solutions of the hydrodynamic equation with step initial condition in this scenario which include various mixtures of rarefaction fans and shock waves. We highlight how the phase diagram of the model changes by varying the model parameters. △ Less

Submitted 12 September, 2016; v1 submitted 9 January, 2016; originally announced January 2016.

Comments: 9 pages, 4 figures in J. Stat. Phys. (2016)

MSC Class: 60K35; 82C22

Anomalous impact in reaction-diffusion models

Authors: Iacopo Mastromatteo, Bence Toth, Jean-Philippe Bouchaud

Abstract: We generalize the reaction-diffusion model A + B -> 0 in order to study the impact of an excess of A (or B) at the reaction front. We provide an exact solution of the model, which shows that linear response breaks down: the average displacement of the reaction front grows as the square-root of the imbalance. We argue that this model provides a highly simplified but generic framework to understand… ▽ More We generalize the reaction-diffusion model A + B -> 0 in order to study the impact of an excess of A (or B) at the reaction front. We provide an exact solution of the model, which shows that linear response breaks down: the average displacement of the reaction front grows as the square-root of the imbalance. We argue that this model provides a highly simplified but generic framework to understand the square-root impact of large orders in financial markets. △ Less

Submitted 14 March, 2014; originally announced March 2014.

Comments: 5 pages, 2 figures

Journal ref: Phys. Rev. Lett. 113, 268701 (2014)

Agent-based models for latent liquidity and concave price impact

Authors: Iacopo Mastromatteo, Bence Toth, Jean-Philippe Bouchaud

Abstract: We revisit the "epsilon-intelligence" model of Toth et al.(2011), that was proposed as a minimal framework to understand the square-root dependence of the impact of meta-orders on volume in financial markets. The basic idea is that most of the daily liquidity is "latent" and furthermore vanishes linearly around the current price, as a consequence of the diffusion of the price itself. However, the… ▽ More We revisit the "epsilon-intelligence" model of Toth et al.(2011), that was proposed as a minimal framework to understand the square-root dependence of the impact of meta-orders on volume in financial markets. The basic idea is that most of the daily liquidity is "latent" and furthermore vanishes linearly around the current price, as a consequence of the diffusion of the price itself. However, the numerical implementation of Toth et al. was criticised as being unrealistic, in particular because all the "intelligence" was conferred to market orders, while limit orders were passive and random. In this work, we study various alternative specifications of the model, for example allowing limit orders to react to the order flow, or changing the execution protocols. By and large, our study lends strong support to the idea that the square-root impact law is a very generic and robust property that requires very few ingredients to be valid. We also show that the transition from super-diffusion to sub-diffusion reported in Toth et al. is in fact a cross-over, but that the original model can be slightly altered in order to give rise to a genuine phase transition, which is of interest on its own. We finally propose a general theoretical framework to understand how a non-linear impact may appear even in the limit where the bias in the order flow is vanishingly small. △ Less

Submitted 22 December, 2014; v1 submitted 25 November, 2013; originally announced November 2013.

Comments: 36 pages, 12 figures, published version

Journal ref: Phys. Rev. E 89, 042805 (2014)

Why is order flow so persistent?

Authors: Bence Toth, Imon Palit, Fabrizio Lillo, J. Doyne Farmer

Abstract: Order flow in equity markets is remarkably persistent in the sense that order signs (to buy or sell) are positively autocorrelated out to time lags of tens of thousands of orders, corresponding to many days. Two possible explanations are herding, corresponding to positive correlation in the behavior of different investors, or order splitting, corresponding to positive autocorrelation in the behavi… ▽ More Order flow in equity markets is remarkably persistent in the sense that order signs (to buy or sell) are positively autocorrelated out to time lags of tens of thousands of orders, corresponding to many days. Two possible explanations are herding, corresponding to positive correlation in the behavior of different investors, or order splitting, corresponding to positive autocorrelation in the behavior of single investors. We investigate this using order flow data from the London Stock Exchange for which we have membership identifiers. By formulating models for herding and order splitting, as well as models for brokerage choice, we are able to overcome the distortion introduced by brokerage. On timescales of less than a few hours the persistence of order flow is overwhelmingly due to splitting rather than herding. We also study the properties of brokerage order flow and show that it is remarkably consistent both cross-sectionally and longitudinally. △ Less

Submitted 30 November, 2014; v1 submitted 8 August, 2011; originally announced August 2011.

Comments: 42 pages, 15 figures

Journal ref: Journal of Economic Dynamics and Control 51, 218-239 (2015)

Anomalous price impact and the critical nature of liquidity in financial markets

Authors: Bence Toth, Yves Lemperiere, Cyril Deremble, Joachim de Lataillade, Julien Kockelkoren, Jean-Philippe Bouchaud

Abstract: We propose a dynamical theory of market liquidity that predicts that the average supply/demand profile is V-shaped and {\it vanishes} around the current price. This result is generic, and only relies on mild assumptions about the order flow and on the fact that prices are (to a first approximation) diffusive. This naturally accounts for two striking stylized facts: first, large metaorders have to… ▽ More We propose a dynamical theory of market liquidity that predicts that the average supply/demand profile is V-shaped and {\it vanishes} around the current price. This result is generic, and only relies on mild assumptions about the order flow and on the fact that prices are (to a first approximation) diffusive. This naturally accounts for two striking stylized facts: first, large metaorders have to be fragmented in order to be digested by the liquidity funnel, leading to long-memory in the sign of the order flow. Second, the anomalously small local liquidity induces a breakdown of linear response and a diverging impact of small orders, explaining the "square-root" impact law, for which we provide additional empirical support. Finally, we test our arguments quantitatively using a numerical model of order flow based on the same minimal ingredients. △ Less

Submitted 1 November, 2011; v1 submitted 9 May, 2011; originally announced May 2011.

Comments: 16 pages, 7 figures

Journal ref: Physical Review X 1, 021006 (2011)