-
Flow in an hourglass: particle friction and stiffness matter
Authors:
Tivadar Pongó,
Viktória Stiga,
János Török,
Sára Lévay,
Balázs Szabó,
Ralf Stannarius,
Raúl Cruz Hidalgo,
Tamás Börzsönyi
Abstract:
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pr…
▽ More
Granular flow out of a silo is studied experimentally and numerically. The time evolution of the discharge rate as well as the normal force (apparent weight) at the bottom of the container is monitored. We show, that particle stiffness has a strong effect on the qualitative features of silo discharge. For deformable grains with a Young's modulus of about $Y_m\approx 40$ kPa in a silo with basal pressure of the order of 4 kPa lowering the friction coefficient leads to a gradual change in the discharge curve: the flow rate becomes filling height dependent, it decreases during the discharge process. For hard grains with a Young's modulus of about $Y_m\approx 500$ MPa the flow rate is much less sensitive to the value of the friction coefficient. Using DEM data combined with a coarse-graining methodology allows us to compute all the relevant macroscopic fields, namely, linear momentum, density and stress tensors. The observed difference in the discharge in the low friction limit is connected to a strong difference in the pressure field: while for hard grains Janssen-screening is effective, leading to high vertical stress near the silo wall and small pressure above the orifice region, for deformable grains the pressure above the orifice is larger and gradually decreases during the discharge process. We have analyzed the momentum balance in the region of the orifice (near the location of the outlet) for the case of soft particles with low friction coefficient, and proposed a phenomenological formulation that predicts the linear decrease of the flow rate with decreasing filling height.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Characterization of the dissolution of water microdroplets in oil
Authors:
Tamás Gerecsei,
Rita Ungai-Salanki,
Andras Saftics,
Imre Derényi,
Robert Horvath,
Balint Szabo
Abstract:
Water in oil emulsions have a wide range of applications from chemical technology to microfluidics, where the stability of water droplets is of paramount importance. Here using an accessible and easily reproducible experimental setup we describe and characterize the dissolution of water in oil, which renders nanoliter-sized droplets unstable, resulting in their shrinkage and disappearance in a tim…
▽ More
Water in oil emulsions have a wide range of applications from chemical technology to microfluidics, where the stability of water droplets is of paramount importance. Here using an accessible and easily reproducible experimental setup we describe and characterize the dissolution of water in oil, which renders nanoliter-sized droplets unstable, resulting in their shrinkage and disappearance in a time scale of hours. This process has applicability in creating miniature reactors for crystallization. We test multiple oils and their combinations with surfactants exhibiting widely different rates of dissolution. We derived simple analytical equations to determine the product of the diffusion coefficient and the relative saturation density of water in oil from the measured dissolution data. By measuring the moisture content of mineral and silicone oils with Karl Fischer titration before and after saturating them with water, we calculated the diffusion coefficient of water in these two oils
△ Less
Submitted 18 December, 2021; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Flow of anisometric particles in a quasi-2D hopper
Authors:
Balazs Szabo,
Zsolt Kovacs,
Sandra Wegner,
Ahmed Ashour,
David Fischer,
Ralf Stannarius,
Tamas Borzsonyi
Abstract:
The stationary flow field in a quasi-two-dimensional hopper is investigated experimentally. The behavior of materials consisting of beads and elongated particles with different aspect ratio is compared. We show, that while the vertical velocity in the flowing region can be fitted with a Gaussian function for beads, in the case of elongated grains the flowing channel is narrower and is bordered wit…
▽ More
The stationary flow field in a quasi-two-dimensional hopper is investigated experimentally. The behavior of materials consisting of beads and elongated particles with different aspect ratio is compared. We show, that while the vertical velocity in the flowing region can be fitted with a Gaussian function for beads, in the case of elongated grains the flowing channel is narrower and is bordered with sharper velocity gradient. For this case, we quantify deviations from the Gaussian velocity profile. Relative velocity fluctuations are considerably larger and slower for elongated grains.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Packing, alignment and flow of shape-anisotropic grains in a 3D silo experiment
Authors:
Tamás Börzsönyi,
Ellák Somfai,
Balázs Szabó,
Sandra Wegner,
Pascal Mier,
Georg Rose,
Ralf Stannarius
Abstract:
Granular material flowing through bottlenecks like the openings of silos tend to clog and to inhibit further flow. We study this phenomenon in a three-dimensional hopper for spherical and shape-anisotropic particles by means of X-ray tomography. The X-ray tomograms provide information on the bulk of the granular filling, and allows to determine the particle positions and orientations inside the si…
▽ More
Granular material flowing through bottlenecks like the openings of silos tend to clog and to inhibit further flow. We study this phenomenon in a three-dimensional hopper for spherical and shape-anisotropic particles by means of X-ray tomography. The X-ray tomograms provide information on the bulk of the granular filling, and allows to determine the particle positions and orientations inside the silo. In addition, it allows to calculate local packing densities in different parts of the container. We find that in the flowing zone of the silo particles show a preferred orientation and thereby a higher order. Similarly to simple shear flows, the average orientation of the particles is not parallel to the streamlines but encloses a certain angle with it. In most parts of the hopper, the angular distribution of the particles did not reach the one corresponding to stationary shear flow, thus the average orientation angle in the hopper deviates more from the streamlines than in stationary shear flows. In the flowing parts of the silo shear induced dilation is observed, which is more pronounced for elongated grains than for nearly spherical particles. The clogged state is characterized by a dome, i. e. the geometry of the layer of grains blocking the outflow. The shape of the dome depends on the particle shape.
△ Less
Submitted 9 September, 2016;
originally announced September 2016.
-
Heaping, Secondary Flows and Broken Symmetry in Flows of Elongated Granular Particles
Authors:
Geert Wortel,
Tamás Börzsönyi,
Ellák Somfai,
Sandra Wegner,
Balázs Szabó,
Ralf Stannarius,
Martin van Hecke
Abstract:
In this paper we report experiments where we shear granular rods in split-bottom geometries, and find that a significant heap of height of least 40% of the filling height can form at the particle surface. We show that heaping is caused by a significant secondary flow, absent for spherical particles. Flow reversal transiently reverses the secondary flow, leading to a quick collapse and slower regen…
▽ More
In this paper we report experiments where we shear granular rods in split-bottom geometries, and find that a significant heap of height of least 40% of the filling height can form at the particle surface. We show that heaping is caused by a significant secondary flow, absent for spherical particles. Flow reversal transiently reverses the secondary flow, leading to a quick collapse and slower regeneration of the heap. We present a symmetry argument and experimental data that show that the generation of the secondary flow is driven by a misalignment of the mean particle orientation with the streamlines of the flow. This general mechanism is expected to be important in all flows of sufficiently anisometric grains.
△ Less
Submitted 10 February, 2015; v1 submitted 12 November, 2014;
originally announced November 2014.
-
Evolution of shear zones in granular materials
Authors:
Balazs Szabo,
Janos Torok,
Ellak Somfai,
Sandra Wegner,
Ralf Stannarius,
Axel Bose,
Georg Rose,
Frank Angenstein,
Tamas Borzsonyi
Abstract:
The evolution of wide shear zones (or shear bands) was investigated experimentally and numerically for quasistatic dry granular flows in split bottom shear cells. We compare the behavior of materials consisting of beads, irregular grains (e.g. sand) and elongated particles. Shearing an initially random sample, the zone width was found to significantly decrease in the first stage of the process. Th…
▽ More
The evolution of wide shear zones (or shear bands) was investigated experimentally and numerically for quasistatic dry granular flows in split bottom shear cells. We compare the behavior of materials consisting of beads, irregular grains (e.g. sand) and elongated particles. Shearing an initially random sample, the zone width was found to significantly decrease in the first stage of the process. The characteristic shear strain associated with this decrease is about unity and it is systematically increasing with shape anisotropy, i.e. when the grain shape changes from spherical to irregular (e.g. sand) and becomes elongated (pegs). The strongly decreasing tendency of the zone width is followed by a slight increase which is more pronounced for rod like particles than for grains with smaller shape anisotropy (beads or irregular particles). The evolution of the zone width is connected to shear induced density change and for nonspherical particles it also involves grain reorientation effects. The final zone width is significantly smaller for irregular grains than for spherical beads.
△ Less
Submitted 7 August, 2014; v1 submitted 18 July, 2014;
originally announced July 2014.
-
Effects of grain shape on packing and dilatancy of sheared granular materials
Authors:
Sandra Wegner,
Ralf Stannarius,
Axel Boese,
Georg Rose,
Balázs Szabó,
Ellák Somfai,
Tamás Börzsönyi
Abstract:
Granular material exposed to shear shows a variety of unique phenomena: Reynolds dilatancy, positional order and orientational order effects may compete in the shear zone. We study granular packings consisting of macroscopic prolate, oblate and spherical grains and compare their behaviour. X-ray tomography is used to determine the particle positions and orientations in a cylindrical split bottom s…
▽ More
Granular material exposed to shear shows a variety of unique phenomena: Reynolds dilatancy, positional order and orientational order effects may compete in the shear zone. We study granular packings consisting of macroscopic prolate, oblate and spherical grains and compare their behaviour. X-ray tomography is used to determine the particle positions and orientations in a cylindrical split bottom shear cell. Packing densities and the arrangements of individual particles in the shear zone are evaluated. For anisometric particles, we observe the competition of two opposite effects. One the one hand, the sheared granulate is dilated, but on the other hand the particles reorient and align with respect to the streamlines. Even though aligned cylinders in principle may achieve higher packing densities, this alignment compensates for the effect of dilatancy only partially. The complex rearrangements lead to a depression of the surface above the well oriented region while neigbouring parts still show the effect of dilation in the form of heaps. For grains with isotropic shapes, the surface remains rather flat. Perfect monodisperse spheres crystallize in the shear zone, whereby positional order partially overcompensates dilatancy effects. However, already slight deviations from the ideal monodisperse sphere shape inhibit crystallization.
△ Less
Submitted 5 June, 2014;
originally announced June 2014.
-
Predictability of measurements
Authors:
Balint Szabo
Abstract:
The second law of thermodynamics states that entropy increases (or does not change) by time in an isolated system. As microscopic physical laws are reversible, the origin of irreversibility is not straightforward. Although the outcome of a measurement on a pure quantum state is not fully predictable due to the Heisenberg uncertainty principle, quantum and finite entropy uncertainties are thought t…
▽ More
The second law of thermodynamics states that entropy increases (or does not change) by time in an isolated system. As microscopic physical laws are reversible, the origin of irreversibility is not straightforward. Although the outcome of a measurement on a pure quantum state is not fully predictable due to the Heisenberg uncertainty principle, quantum and finite entropy uncertainties are thought to be fundamentally different. We propose to calculate the predictability of measurements comprising both quantum and entropic uncertainties. We show that the unpredictability of measurements is identical to entropy in case of semiclassical statistical mechanics, and it increases by time in a pure entangled quantum state as a result of quantum measurement.
△ Less
Submitted 17 February, 2013;
originally announced February 2013.
-
Shear induced alignment and dynamics of elongated granular particles
Authors:
Tamas Borzsonyi,
Balazs Szabo,
Sandra Wegner,
Kirsten Harth,
Janos Torok,
Ellak Somfai,
Tomasz Bien,
Ralf Stannarius
Abstract:
The alignment, ordering and rotation of elongated granular particles was studied in shear flow. The time evolution of the orientation of a large number of particles was monitored in laboratory experiments by particle tracking using optical imaging and x-ray computed tomography. The experiments were complemented by discrete element simulations. The particles develop an orientational order. In the s…
▽ More
The alignment, ordering and rotation of elongated granular particles was studied in shear flow. The time evolution of the orientation of a large number of particles was monitored in laboratory experiments by particle tracking using optical imaging and x-ray computed tomography. The experiments were complemented by discrete element simulations. The particles develop an orientational order. In the steady state the time and ensemble averaged direction of the main axis of the particles encloses a small angle with the streamlines. This shear alignment angle is independent of the applied shear rate, and it decreases with increasing grain aspect ratio. At the grain level the steady state is characterized by a net rotation of the particles, as dictated by the shear flow. The distribution of particle rotational velocities was measured both in the steady state and also during the initial transients. The average rotation speed of particles with their long axis perpendicular to the shear alignment angle is larger, while shear aligned particles rotate slower. The ratio of this fast/slow rotation increases with particle aspect ratio. During the initial transient starting from an unaligned initial condition, particles having an orientation just beyond the shear alignment angle rotate opposite to the direction dictated by the shear flow.
△ Less
Submitted 13 November, 2012;
originally announced November 2012.
-
Orientational order and alignment of elongated particles induced by shear
Authors:
Tamas Borzsonyi,
Balazs Szabo,
Gabor Toros,
Sandra Wegner,
Janos Torok,
Ellak Somfai,
Tomasz Bien,
Ralf Stannarius
Abstract:
Shear induced alignment of elongated particles is studied experimentally and numerically. We show that shear alignment of ensembles of macroscopic particles is comparable even on a quantitative level to simple molecular systems, despite the completely different types of particle interactions. We demonstrate that for dry elongated grains the preferred orientation forms a small angle with the stream…
▽ More
Shear induced alignment of elongated particles is studied experimentally and numerically. We show that shear alignment of ensembles of macroscopic particles is comparable even on a quantitative level to simple molecular systems, despite the completely different types of particle interactions. We demonstrate that for dry elongated grains the preferred orientation forms a small angle with the streamlines, independent of shear rate across three decades. For a given particle shape, this angle decreases with increasing aspect ratio of the particles. The shear-induced alignment results in a considerable reduction of the effective friction of the granular material.
△ Less
Submitted 26 April, 2012;
originally announced April 2012.
-
Reflection and Exclusion of Shear Zones in Inhomogeneous Granular Materials
Authors:
Tamas Borzsonyi,
Tamas Unger,
Balazs Szabo,
Sandra Wegner,
Frank Angenstein,
Ralf Stannarius
Abstract:
Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle…
▽ More
Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle of refraction in optics. The zone leaves and reenters the high friction region at this critical angle and in between it stays near the interface in the low friction region. The formalism describing the geometry of the shear zones and that of refracted and reflected light beams is very similar. For the internal visualization of shear localization two independent experimental techniques were used (i) excavation and (ii) Magnetic Resonance Imaging.
△ Less
Submitted 17 August, 2011;
originally announced August 2011.
-
Viral epidemics in a cell culture: novel high resolution data and their interpretation by a percolation theory based model
Authors:
Balázs Gönci,
Valéria Németh,
Emeric Balogh,
Bálint Szabó,
Ádám Dénes,
Zsuzsanna Környei,
Tamás Vicsek
Abstract:
Because of its relevance to everyday life, the spreading of viral infections has been of central interest in a variety of scientific communities involved in fighting, preventing and theoretically interpreting epidemic processes. Recent large scale observations have resulted in major discoveries concerning the overall features of the spreading process in systems with highly mobile susceptible units…
▽ More
Because of its relevance to everyday life, the spreading of viral infections has been of central interest in a variety of scientific communities involved in fighting, preventing and theoretically interpreting epidemic processes. Recent large scale observations have resulted in major discoveries concerning the overall features of the spreading process in systems with highly mobile susceptible units, but virtually no data are available about observations of infection spreading for a very large number of immobile units. Here we present the first detailed quantitative documentation of percolation-type viral epidemics in a highly reproducible in vitro system consisting of tens of thousands of virtually motionless cells. We use a confluent astroglial monolayer in a Petri dish and induce productive infection in a limited number of cells with a genetically modified herpesvirus strain. This approach allows extreme high resolution tracking of the spatio-temporal development of the epidemic. We show that a simple model is capable of reproducing the basic features of our observations, i.e., the observed behaviour is likely to be applicable to many different kinds of systems. Statistical physics inspired approaches to our data, such as fractal dimension of the infected clusters as well as their size distribution, seem to fit into a percolation theory based interpretation. We suggest that our observations may be used to model epidemics in more complex systems, which are difficult to study in isolation.
△ Less
Submitted 1 December, 2010;
originally announced December 2010.
-
Shear zone refraction and deflection in layered granular materials
Authors:
Tamas Borzsonyi,
Tamas Unger,
Balazs Szabo
Abstract:
Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure…
▽ More
Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure conditions (i.e. in the presence of gravity) the zone can also be deflected by the interface so that the deformation of the high friction material is avoided.
△ Less
Submitted 9 December, 2009; v1 submitted 11 June, 2009;
originally announced June 2009.
-
Phase transition in the collective migration of tissue cells: experiment and model
Authors:
Balint Szabo,
Gergely J. Szollosi,
Balazs Gonci,
Zsofi Juranyi,
David Selmeczi,
Tamas Vicsek
Abstract:
We have recorded the swarming-like collective migration of a large number of keratocytes (tissue cells obtained from the scales of goldfish) using long-term videomicroscopy. By increasing the overall density of the migrating cells, we have been able to demonstrate experimentally a kinetic phase transition from a disordered into an ordered state. Near the critical density a complex picture emerge…
▽ More
We have recorded the swarming-like collective migration of a large number of keratocytes (tissue cells obtained from the scales of goldfish) using long-term videomicroscopy. By increasing the overall density of the migrating cells, we have been able to demonstrate experimentally a kinetic phase transition from a disordered into an ordered state. Near the critical density a complex picture emerges with interacting clusters of cells moving in groups. Motivated by these experiments we have constructed a flocking model that exhibits a continuous transition to the ordered phase, while assuming only short-range interactions and no explicit information about the knowledge of the directions of motion of neighbors. Placing cells in microfabricated arenas we found spectacular whirling behavior which we could also reproduce in simulations.
△ Less
Submitted 15 November, 2006;
originally announced November 2006.
