-
Modeling of porous lithium metal electrodes: turning the Li-dendrite problem around
Authors:
Giovanna Bucci,
Tushar Swamy,
W. Craig Carter,
Morad Behandish
Abstract:
The properties of rechargeable lithium-ion batteries are determined by the electrochemical and kinetic properties of their constituent materials as well as by their underlying microstructure. Microstructural design can be leveraged to achieve a leap in performance and durability. Here we investigate a porous electrode structure, as a strategy to increase the surface area, and provide structural st…
▽ More
The properties of rechargeable lithium-ion batteries are determined by the electrochemical and kinetic properties of their constituent materials as well as by their underlying microstructure. Microstructural design can be leveraged to achieve a leap in performance and durability. Here we investigate a porous electrode structure, as a strategy to increase the surface area, and provide structural stability for Li-metal anodes. The porous architecture consists of a mixed electron/ion conductor that function as a scaffold for lithium metal deposition. A new finite element model was developed to simulate the large topological changes associated with Li plating/stripping. This model is used to predict the current density distribution as a function of material and structural properties. A dimensionless quantity that combines Li-ion conductivity, surface impedance and average pore size is shown to be a good indicator to predict the peak current density. Preventing current localization at the separator reduces the risk of cell shorting. The analyses show that the peak current scales as $(hG)^{1/2}$, where $h$ is the ratio between surface and bulk conductivity and $G$ is the average pore size. Stability analyses suggest that the growth is morphologically stable, and that confining Li-plating into pores can enable high-energy density solid-state batteries. In addition to optimizing porous electrodes design, this finite element method can be extended to studying other Li-battery structures.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Lithium Metal Penetration Induced by Electrodeposition through Solid Electrolytes: Example in Single-Crystal Li6La3ZrTaO12 Garnet
Authors:
Tushar Swamy,
Richard Park,
Brian W. Sheldon,
Daniel Rettenwander,
Lukas Porz,
Stefan Berendts,
Reinhard Uecker,
W. Craig Carter,
Yet-Ming Chiang
Abstract:
Solid electrolytes are considered a potentially enabling component in rechargeable batteries that use lithium metal as the negative electrode, and thereby can safely access higher energy density than available with today's lithium ion batteries. To do so, the solid electrolyte must be able to suppress morphological instabilities that lead to poor coulombic efficiency and, in the worst case, intern…
▽ More
Solid electrolytes are considered a potentially enabling component in rechargeable batteries that use lithium metal as the negative electrode, and thereby can safely access higher energy density than available with today's lithium ion batteries. To do so, the solid electrolyte must be able to suppress morphological instabilities that lead to poor coulombic efficiency and, in the worst case, internal short circuits. In this work, lithium electrodeposition experiments were performed using single-crystal Li6La3ZrTaO12 garnet as solid electrolyte layers to investigate the factors that determine whether lithium penetration occurs through brittle inorganic solid electrolytes. In these single crystals, grain boundaries are excluded as possible paths for lithium metal propagation. However, Vickers microindentation was used to introduce sharp surface flaws of known size. Using operando optical microscopy, it was found that lithium metal penetration sometimes initiates at these controlled surface defects, and when multiple indents of varying size were present, propagates preferentially from the largest defect. However, a second class of flaws was found to be equally or more important. At the perimeter of surface current collectors, an enhanced electrodeposition current density causes lithium metal filled cracks to initiate and grow to penetration, even when the large Vickers defects are in close proximity. Modeling the electric field concentration for the experimental configurations, it was shown that a factor of 5 enhancement in field can readily occur within 10 micrometers of current collector discontinuities, which we interpret as the origin of electrochemomechanical stresses leading to failure. Such field amplification may determine the sites where supercritical surface defects dominate lithium metal propagation during electrodeposition, overriding the presence of larger defects elsewhere.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design
Authors:
Giovanna Bucci,
Tushar Swamy,
Yet-Ming Chiang,
W. Craig Carter
Abstract:
This is the first quantitative analysis of mechanical reliability of all-solid state batteries. Mechanical degradation of the solid electrolyte (SE) is caused by intercalation-induced expansion of the electrode particles, within the constrain of a dense microstructure. A coupled electro-chemo-mechanical model was implemented to quantify the material properties that cause a SE to fracture. The trea…
▽ More
This is the first quantitative analysis of mechanical reliability of all-solid state batteries. Mechanical degradation of the solid electrolyte (SE) is caused by intercalation-induced expansion of the electrode particles, within the constrain of a dense microstructure. A coupled electro-chemo-mechanical model was implemented to quantify the material properties that cause a SE to fracture. The treatment of microstructural details is essential to the understanding of stress-localization phenomena and fracture. A cohesive zone model is employed to simulate the evolution of damage. In the numerical tests, fracture is prevented only if electrode-particle's expansion is lower than 7.5% and the solid-electrolyte's fracture energy higher than $G_c = 4$ J m$^{-2}$. Perhaps counter-intuitively, the analyses show that compliant solid electrolytes (with Young's modulus in the order of E$_{SE} = 15$ GPa) are more prone to micro-cracking. This result, captured by our non-linear kinematics model, contradicts the speculations that sulfide SEs are more suitable for the design of bulk-type batteries than oxide SEs. Mechanical degradation is linked to the battery power-density. Fracture in solid Li-ion conductors represents a barrier for Li transport, and accelerates the decay of rate performance.
△ Less
Submitted 14 March, 2017; v1 submitted 28 February, 2017;
originally announced March 2017.
