-
Graphene on silicon: effects of the silicon surface orientation on the work function and carrier density of graphene
Authors:
Y. W. Sun,
D. Holec,
D. Gehringer,
L. Li,
O. Fenwick,
D. J. Dunstan,
C. J. Humphreys
Abstract:
Density functional theory has been employed to study graphene on the (111), (100) and (110) surfaces of silicon (Si) substrates. There are several interesting findings. First, carbon atoms in graphene form covalent bonds with Si atoms, when placed close enough on Si (111) and (100) surfaces, but not on the (110) surface. The presence of a Si (111) surface shifts the Fermi level of graphene into it…
▽ More
Density functional theory has been employed to study graphene on the (111), (100) and (110) surfaces of silicon (Si) substrates. There are several interesting findings. First, carbon atoms in graphene form covalent bonds with Si atoms, when placed close enough on Si (111) and (100) surfaces, but not on the (110) surface. The presence of a Si (111) surface shifts the Fermi level of graphene into its conduction band, resulting in an increase of the work function by 0.29 eV and of the electron density by three orders of magnitude. The carrier density of graphene can also be increased by eighty times on a Si (100) substrate without doping, due to the modification of the density of states near the Dirac point. No interfacial covalent bond can be formed on Si (110). These striking effects that different orientations of a silicon substrate can have on the properties of graphene are related to the surface density of the silicon surface. Applying the results to a real device of a specific orientation requires further consideration of surface reconstructions, lattice mismatch, temperature, and environmental effects.
△ Less
Submitted 12 July, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
3D strain in 2D materials: Experimental test in unsupported monolayer graphene under pressure
Authors:
Y. W. Sun,
W. Liu,
I. Hernandez,
J. Gonzalez,
F. Rodriguez,
D. J. Dunstan,
C. J. Humphreys
Abstract:
Previous Raman measurements on supported graphene under high pressure reported a very different shift rate of in-plane phonon frequency of graphene (16 cm$^{-1}$GPa$^{-1}$) from graphite (4.7 cm$^{-1}$GPa$^{-1}$), implying very different in-plane anharmonicity that graphene gets stiffer than graphite in-plane under the same pressure. It was suggested that it could be due to the adhesion of graphen…
▽ More
Previous Raman measurements on supported graphene under high pressure reported a very different shift rate of in-plane phonon frequency of graphene (16 cm$^{-1}$GPa$^{-1}$) from graphite (4.7 cm$^{-1}$GPa$^{-1}$), implying very different in-plane anharmonicity that graphene gets stiffer than graphite in-plane under the same pressure. It was suggested that it could be due to the adhesion of graphene to substrates. We have therefore performed high pressure Raman measurements on unsupported graphene and we find a similar in-plane stiffness and anharmonicity of graphene (5.4 cm$^{-1}$GPa$^{-1}$) to graphite. On the other hand, the out-of-plane stiffness of graphene is hard to define, due to the 2D nature of graphene. However, we estimate a similar out-of-plane stiffness of graphene (1.4$\pm$295 GPa) to that of graphite (38.7$\pm$7 GPa), by measuring its effect on the shift of the in-plane phonon frequency with pressure.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
The Effect of Humidity on the Interlayer Interaction of Bi-layer Graphene
Authors:
A. Qadir,
Y. W. Sun,
W. Liu,
P. Goldberg Oppenheimer,
Y. Xu,
C. J. Humphreys,
D. J. Dunstan
Abstract:
The lubricating ability of graphite largely depends on the environmental humidity, essentially the amount of water in between its layers. In general, intercalated molecules in layered materials modify their extraordinary properties by interacting with the layers. To understand the interaction of intercalated water molecules with graphene layers, we performed Raman measurements on bi-layer graphene…
▽ More
The lubricating ability of graphite largely depends on the environmental humidity, essentially the amount of water in between its layers. In general, intercalated molecules in layered materials modify their extraordinary properties by interacting with the layers. To understand the interaction of intercalated water molecules with graphene layers, we performed Raman measurements on bi-layer graphene at various humidity levels and observed an additional peak close to that of the low-frequency layer breathing mode between two graphene layers. The additional peak is attributed to the vibration between an intercalated water layer and the graphene layers. We further propose that the monolayer coverage of water increases between bilayer graphene with increasing environmental humidity while the interaction between the water layer and graphene layers remains approximately unchanged, until too much water is intercalated to keep the monolayer structure, at just over 50\% relative humidity. Notably, the results suggest that unexpectedly humidity could be an important factor affecting the properties of layered materials, as it significantly modifies the interlayer interaction.
△ Less
Submitted 25 September, 2018;
originally announced September 2018.
-
Graphite Under Compression: Shift of Layer Breathing and Shear Modes Frequencies with Interlayer Spacing
Authors:
Y. W. Sun,
D. Holec,
Y. Xu,
D. J. Dunstan
Abstract:
Layered materials have huge potential in various applications due to their extraordinary properties. To determine the interlayer interaction (or equivalently the layer spacing under different perturbations) is of critical importance. In this letter, we focus on one of the most prominent layered materials, graphite, and theoretically quantify the relationship between its interlayer spacing and the…
▽ More
Layered materials have huge potential in various applications due to their extraordinary properties. To determine the interlayer interaction (or equivalently the layer spacing under different perturbations) is of critical importance. In this letter, we focus on one of the most prominent layered materials, graphite, and theoretically quantify the relationship between its interlayer spacing and the vibrational frequencies of its layer breathing and shear modes, which are measures of the interlayer interaction. The method used here to determine the interlayer interaction can be further applied to other layered materials.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
Graphite under uniaxial compression along c-axis: a new parameter relates out-of-plane strain to in-plane phonon frequency
Authors:
Y. W. Sun,
D. Holec,
D. J. Dunstan
Abstract:
Stacking graphene sheets forms graphite. Two in-plane vibrational modes of graphite, E1u and E2g(2), are derived from graphene E2g mode, the shifts of which under compression are all considered as results of in-plane bond shortening. Values of Gruneisen parameter have been reported to quantify such relation. However, the reason why the shift rates of these three modes with pressure differ is uncl…
▽ More
Stacking graphene sheets forms graphite. Two in-plane vibrational modes of graphite, E1u and E2g(2), are derived from graphene E2g mode, the shifts of which under compression are all considered as results of in-plane bond shortening. Values of Gruneisen parameter have been reported to quantify such relation. However, the reason why the shift rates of these three modes with pressure differ is unclear. In this work, we introduce a new parameter to quantify the contribution of out-of-plane strain to the in-plane vibrational frequencies, suggesting that the compression of π-electrons plays a non-negligible part in both graphite and graphene under high pressure.
△ Less
Submitted 27 August, 2015; v1 submitted 15 February, 2015;
originally announced February 2015.
-
The Significance of Bundling Effects on Carbon Nanotubes' Response to Hydrostatic Compression
Authors:
Y. W. Sun,
I. Hernandez,
J. Gonzalez,
K. Scott,
K. J. Donovan,
A. Sapelkin,
F. Rodriguez,
D. J. Dunstan
Abstract:
The study of the G-mode pressure coefficients of carbon nanotubes, reflecting the stiff sp2 bond pressure dependence, is essential to the understanding of their extraordinary mechanical properties as well as fundamental mechanics. However, it is hindered by the availability of carbon nanotubes samples only as bundles or isolated with surfactants. Octadecylamine functionalized carbon nanotubes are…
▽ More
The study of the G-mode pressure coefficients of carbon nanotubes, reflecting the stiff sp2 bond pressure dependence, is essential to the understanding of their extraordinary mechanical properties as well as fundamental mechanics. However, it is hindered by the availability of carbon nanotubes samples only as bundles or isolated with surfactants. Octadecylamine functionalized carbon nanotubes are mostly of a single diameter and can be stably dispersed in 1, 2-dichloroethane and chloroform without surfactants. Here we perform high pressure Raman spectroscopy on these tubes and obtain their experimental G-mode pressure coefficients for individual tubes and bundles. The G-plus pressure coefficient for bundles is only about half of that for individual tubes in 1, 2-dichloroethane and is about two-thirds in chloroform. The G-minus pressure coefficient for bundles is about one-third of G-plus in 1, 2-dichloroethane and about the same in chloroform. These results for the first time provide unambiguous experimental evidence of the significant effect of bundling on carbon nanotubes' G-mode pressure coefficients, identifying it as one of the major reasons for the lack of consensus on what the values should be in the literature.
△ Less
Submitted 17 February, 2015; v1 submitted 21 November, 2014;
originally announced November 2014.
-
Pressure coefficients of Raman modes of carbon nanotubes resolved by chirality: Environmental effect on graphene sheet
Authors:
A. J. Ghandour,
I. F. Crowe,
J. E. Proctor,
Y. W. Sun,
M. P. Halsall,
I. Hernandez,
A. Sapelkin,
D. J. Dunstan
Abstract:
Studies of the mechanical properties of single-walled carbon nanotubes are hindered by the availability only of ensembles of tubes with a range of diameters. Tunable Raman excitation spectroscopy picks out identifiable tubes. Under high pressure, the radial breathing mode shows a strong environmental effect shown here to be largely independent of the nature of the environment . For the G-mode, the…
▽ More
Studies of the mechanical properties of single-walled carbon nanotubes are hindered by the availability only of ensembles of tubes with a range of diameters. Tunable Raman excitation spectroscopy picks out identifiable tubes. Under high pressure, the radial breathing mode shows a strong environmental effect shown here to be largely independent of the nature of the environment . For the G-mode, the pressure coefficient varies with diameter consistent with the thick-wall tube model. However, results show an unexpectedly strong environmental effect on the pressure coefficients. Reappraisal of data for graphene and graphite gives the G-mode Grueuneisen parameter gamma = 1.34 and the shear deformation parameter beta = 1.34.
△ Less
Submitted 3 August, 2012;
originally announced August 2012.
-
High-sensitivity microwave vector detection at extremely low-power levels for low-dimensional electron systems
Authors:
W. H. Hsieh,
C. H. Kuan,
Y. W. Suen,
S. Y. Chang,
L. C. Li B. C. Lee,
C. P. Lee
Abstract:
We present a high-sensitivity microwave vector detection system for studying the low-dimensional electron system embedded in the gaps of a coplanar waveguide at low temperatures. Using this system, we have achieved 0.005% and 0.001\textdegree resolutions in amplitude and phase variations, respectively, at 10 GHz in a magnetotransport measurement on a quantum-wire array with an average signal pow…
▽ More
We present a high-sensitivity microwave vector detection system for studying the low-dimensional electron system embedded in the gaps of a coplanar waveguide at low temperatures. Using this system, we have achieved 0.005% and 0.001\textdegree resolutions in amplitude and phase variations, respectively, at 10 GHz in a magnetotransport measurement on a quantum-wire array with an average signal power less than $-$75 dBm into the sample at 0.3 K. From the measured phase variation, we can distinguish a very tiny change in the induced dipole moment of each quantum wire.
△ Less
Submitted 27 April, 2005;
originally announced April 2005.
-
Instrumentation of a high-sensitivity microwave vector detection system for low-temperature applications
Authors:
Y. W. Suen,
W. H. Hsieh,
C. L. Chen,
L. C. Li,
C. H. Kuan
Abstract:
We present the design and the circuit details of a high-sensitivity microwave vector detection system, which is aiming for studying the low-dimensional electron system embedded in the slots of a coplanar waveguide at low temperatures. The coplanar waveguide sample is placed inside a phase-locked loop; the phase change of the sample may cause a corresponding change in the operation frequency, whi…
▽ More
We present the design and the circuit details of a high-sensitivity microwave vector detection system, which is aiming for studying the low-dimensional electron system embedded in the slots of a coplanar waveguide at low temperatures. The coplanar waveguide sample is placed inside a phase-locked loop; the phase change of the sample may cause a corresponding change in the operation frequency, which can be measured precisely. We also employ a double-pulse modulation on the microwave signals, which comprises a fast pulse modulation for gated averaging and a slow pulse modulation for lock-in detection. In measurements on real samples at low temperatures, this system provides much better resolutions in both amplitude and phase than most of the conventional vector analyzers at power levels below -65 dBm.
△ Less
Submitted 23 April, 2005;
originally announced April 2005.
-
Spontaneous Interlayer Charge Transfer near the Magnetic Quantum Limit
Authors:
H. C. Manoharan,
Y. W. Suen,
T. S. Lay,
M. B. Santos,
M. Shayegan
Abstract:
Experiments reveal that a confined electron system with two equally-populated layers at zero magnetic field can spontaneously break this symmetry through an interlayer charge transfer near the magnetic quantum limit. New fractional quantum Hall states at unusual total filling factors such as ν= 11/15 (= 1/3 + 2/5) stabilize as signatures that the system deforms itself, at substantial electrostat…
▽ More
Experiments reveal that a confined electron system with two equally-populated layers at zero magnetic field can spontaneously break this symmetry through an interlayer charge transfer near the magnetic quantum limit. New fractional quantum Hall states at unusual total filling factors such as ν= 11/15 (= 1/3 + 2/5) stabilize as signatures that the system deforms itself, at substantial electrostatic energy cost, in order to gain crucial correlation energy by "locking in" separate incompressible liquid phases at unequal fillings in the two layers (e.g., layered 1/3 and 2/5 states in the case of ν= 11/15).
△ Less
Submitted 25 September, 1997;
originally announced September 1997.
-
Evidence for a Bilayer Quantum Wigner Solid
Authors:
H. C. Manoharan,
Y. W. Suen,
M. B. Santos,
M. Shayegan
Abstract:
As the electronic charge distribution in a wide quantum well is tuned from a single-layer through an interacting bilayer configuration to weakly-coupled parallel layers, we observe an insulating phase concurrently manifesting a dramatic evolution. The data reveal that interlayer interactions, playing a crucial role, are able to stabilize a {\it correlated bilayer} electron insulator, thus provid…
▽ More
As the electronic charge distribution in a wide quantum well is tuned from a single-layer through an interacting bilayer configuration to weakly-coupled parallel layers, we observe an insulating phase concurrently manifesting a dramatic evolution. The data reveal that interlayer interactions, playing a crucial role, are able to stabilize a {\it correlated bilayer} electron insulator, thus providing tantalizing evidence of a pinned bilayer Wigner solid phase crystallizing at total filling factor $ν$ as large as 0.54 ($ν> \frac14$ in each layer).
△ Less
Submitted 1 March, 1996;
originally announced March 1996.