Showing 1–50 of 288 results for author: Sun, L

Coupling between magnetism and band structure in a 2D semiconductor

Authors: Lihuan Sun, Marco Gibertini, Alessandro Scarfato, Menghan Liao, Fan Wu, Alberto F. Morpurgo, Christoph Renner

Abstract: Van der Waals semiconducting magnets exhibit a cornucopia of physical phenomena originating from the interplay of their semiconducting and magnetic properties. However, a comprehensive understanding of how semiconducting processes and magnetism are coupled is lacking. We address this question by performing scanning tunneling spectroscopy (STS) measurements on the magnetic semiconductor CrPS$_4$, a… ▽ More Van der Waals semiconducting magnets exhibit a cornucopia of physical phenomena originating from the interplay of their semiconducting and magnetic properties. However, a comprehensive understanding of how semiconducting processes and magnetism are coupled is lacking. We address this question by performing scanning tunneling spectroscopy (STS) measurements on the magnetic semiconductor CrPS$_4$, and by comparing the results to photoluminescence experiments and density functional theory (DFT) calculations. Below the magnetic transition, STS exhibit multiple features absent in the paramagnetic state, caused by the proliferation of electronic bands due to spin splitting with a large ($\simeq 0.5$ eV) exchange energy. The energetic differences between the band edges determined by STS match all observed photoluminescence transitions, which also proliferate in the magnetic state. DFT calculations quantitatively predict the relative positions of all detected bands, explain which pairs of bands lead to radiative transitions, and also reproduce the measured spatial dependence of electronic wavefunctions. Our results reveal how all basic optoelectronic processes observed in CrPS$_4$ can be understood in terms of the evolution of the electronic band structure when entering the magnetic state, and allow us to conclude that individual bands are fully spin-polarized over a broad energy interval. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Bipolar doping in van der Waals semiconductor through Flexo-doping

Authors: Bo Zhang, Hui Xia, Zhengdong Huang, Yaqian Liu, Jun Kang, Liaoxin Sun, Tianxin Li, Su-Huai Wei, Wei Lu

Abstract: Doping plays a key role in functionalizing semiconductor devices, yet traditional chemical approaches relying on foreign-atom incorporation suffer from doping-asymmetry, pronounced lattice disorder and constrained spatial resolution. Here, we demonstrate a physical doping technique to directly write nanoscale doping patterns into layered semiconductors (MoS2). By applying localized tensile and com… ▽ More Doping plays a key role in functionalizing semiconductor devices, yet traditional chemical approaches relying on foreign-atom incorporation suffer from doping-asymmetry, pronounced lattice disorder and constrained spatial resolution. Here, we demonstrate a physical doping technique to directly write nanoscale doping patterns into layered semiconductors (MoS2). By applying localized tensile and compressive stress via an atomic force microscopy probe, p and n type conductance are simultaneously written into the designed area with sub-100-nm resolution, as verified by spatially resolved capacitance and photocurrent experiments. Density functional theory calculations reveal strain-driven shifts of donor and acceptor levels, as large as several hundreds of meV, linking mechanical stress to semiconductor doping. Fabricated strain-engineered junction efficiently rectifies the current flow and performs logic operations with stable dynamic response. This strain-driven approach enables spatially precise doping in van der Waals materials without degrading crystallinity, offering a versatile platform for nanoscale semiconductor devices. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Superconducting susceptibility signal captured in a record wide pressure range

Authors: Shu Cai, Jinyu Zhao, Di Peng, Yazhou Zhou, Jing Guo, Nana Li, Jianbo Zhang, Yang Ding, Wenge Yang, Qiaoshi Zeng, Qi Wu, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: In recent years, the resistance signature of the high temperature superconductivity above 250 K in highly compressed hydrides (more than 100 GPa) has garnered significant attention within the condensed matter physics community. This has sparked renewed optimism for achieving superconductivity under room-temperature conditions. However, the superconducting diamagnetism, another crucial property for… ▽ More In recent years, the resistance signature of the high temperature superconductivity above 250 K in highly compressed hydrides (more than 100 GPa) has garnered significant attention within the condensed matter physics community. This has sparked renewed optimism for achieving superconductivity under room-temperature conditions. However, the superconducting diamagnetism, another crucial property for confirming the superconductivity, has yet to be conclusively observed. The primary challenge arises from the weak diamagnetic signals detected from the small samples compressed in diamond anvil cells. Therefore, the reported results of superconducting diamagnetism in hydrides have sparked intense debate, highlighting the urgent need for workable methodology to assess the validity of the experimental results. Here, we are the first to report the ultrahigh pressure measurements of the superconducting diamagnetism on Nb0.44Ti0.56, a commercial superconducting alloy, in a record-wide pressure range from 5 GPa to 160 GPa. We present detailed results on factors such as sample size, the diamagnetic signal intensity, the signal-to-noise ratio and the superconducting transition temperature across various pressures and different pressure transmitting media. These comprehensive results clearly demonstrate that this alloy is an ideal reference sample for evaluating superconductivity in compressed hydrides,validating the credibility of the experimental systems and superconducting diamagnetic results, as well as determining the nature of the superconductivity of the investigated sample. In addition, these results also provide a valuable benchmark for studying the pressure-induced superconductivity in other material families. △ Less

Submitted 8 May, 2025; originally announced May 2025.

Comments: 18 pages,4 figures

The 2D Materials Roadmap

Authors: Wencai Ren, Peter Bøggild, Joan Redwing, Kostya Novoselov, Luzhao Sun, Yue Qi, Kaicheng Jia, Zhongfan Liu, Oliver Burton, Jack Alexander-Webber, Stephan Hofmann, Yang Cao, Yu Long, Quan-Hong Yang, Dan Li, Soo Ho Choi, Ki Kang Kim, Young Hee Lee, Mian Li, Qing Huang, Yury Gogotsi, Nicholas Clark, Amy Carl, Roman Gorbachev, Thomas Olsen , et al. (48 additional authors not shown)

Abstract: Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and developme… ▽ More Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials. △ Less

Submitted 28 April, 2025; v1 submitted 28 March, 2025; originally announced March 2025.

Comments: 97 pages, to be published in 2D Materials

Efficient shortcuts-to-adiabaticity for loading an ultracold Fermi gas into higher orbital bands of one-dimensional optical lattice

Authors: Hang Yu, Haoyi Zhang, Bolong Jiao, Qinxuan Peng, Liao Sun, Jiaming Li, Le Luo

Abstract: We propose an experimental scheme to load ultracold Fermi gases from the ground orbital band of a one-dimensional optical lattice into the first excited orbital band. Unlike the narrow momentum distribution of a Bose-Einstein Condensate, Fermi gases exhibit a broad momentum distribution. To address this, we define the average loading efficiency across all quasi-momentum states and theoretically pe… ▽ More We propose an experimental scheme to load ultracold Fermi gases from the ground orbital band of a one-dimensional optical lattice into the first excited orbital band. Unlike the narrow momentum distribution of a Bose-Einstein Condensate, Fermi gases exhibit a broad momentum distribution. To address this, we define the average loading efficiency across all quasi-momentum states and theoretically perform the loading operation simultaneously for each Bloch state. Using a multiparameter global optimization method, we determine the loading efficiency at various lattice depths. We can enhance the loading efficiency by adjusting the phase of the lattice, which leverages the different symmetries of Bloch wavefunctions in various optical lattice orbitals. We also identified that the primary factor hindering higher loading efficiency in the Fermi gas is the multiple occupancy of the quasi-momentum states. Our simulations of various occupancies revealed a decreasing trend in mean loading efficiency as the number of occupied quasi-momentum states increases. Finally, we compare our method with other loading techniques and assess its experimental feasibility. △ Less

Submitted 5 March, 2025; v1 submitted 3 March, 2025; originally announced March 2025.

Comments: 9 pages, 8 figures

ABACUS: An Electronic Structure Analysis Package for the AI Era

Authors: Weiqing Zhou, Daye Zheng, Qianrui Liu, Denghui Lu, Yu Liu, Peize Lin, Yike Huang, Xingliang Peng, Jie J. Bao, Chun Cai, Zuxin Jin, Jing Wu, Haochong Zhang, Gan Jin, Yuyang Ji, Zhenxiong Shen, Xiaohui Liu, Liang Sun, Yu Cao, Menglin Sun, Jianchuan Liu, Tao Chen, Renxi Liu, Yuanbo Li, Haozhi Han , et al. (28 additional authors not shown)

Abstract: ABACUS (Atomic-orbital Based Ab-initio Computation at USTC) is an open-source software for first-principles electronic structure calculations and molecular dynamics simulations. It mainly features density functional theory (DFT) and is compatible with both plane-wave basis sets and numerical atomic orbital basis sets. ABACUS serves as a platform that facilitates the integration of various electron… ▽ More ABACUS (Atomic-orbital Based Ab-initio Computation at USTC) is an open-source software for first-principles electronic structure calculations and molecular dynamics simulations. It mainly features density functional theory (DFT) and is compatible with both plane-wave basis sets and numerical atomic orbital basis sets. ABACUS serves as a platform that facilitates the integration of various electronic structure methods, such as Kohn-Sham DFT, stochastic DFT, orbital-free DFT, and real-time time-dependent DFT, etc. In addition, with the aid of high-performance computing, ABACUS is designed to perform efficiently and provide massive amounts of first-principles data for generating general-purpose machine learning potentials, such as DPA models. Furthermore, ABACUS serves as an electronic structure platform that interfaces with several AI-assisted algorithms and packages, such as DeePKS-kit, DeePMD, DP-GEN, DeepH, DeePTB, etc. △ Less

Submitted 20 January, 2025; v1 submitted 15 January, 2025; originally announced January 2025.

Guiding polaritonic energy and momentum through two-dimensional Bravais lattices

Authors: Zhonglin Li, Yingying Wang, Ruitong Bie, Dongliang Yang, Tianze Yu, Wenjun Liu, Linfeng Sun, Zexiang Shen

Abstract: The strong exciton absorption in monolayer transition metal dichalcogenides provides a promising platform for studying polaritons with tunable dispersions, which are crucial for controlling polaritonic energy and momentum, but remain underexplored. In this work, monolayer MoS$_2$ is coupled with a Fabry-Pérot microcavity to form polaritons. Five types of Bravais lattices with sub-wavelength period… ▽ More The strong exciton absorption in monolayer transition metal dichalcogenides provides a promising platform for studying polaritons with tunable dispersions, which are crucial for controlling polaritonic energy and momentum, but remain underexplored. In this work, monolayer MoS$_2$ is coupled with a Fabry-Pérot microcavity to form polaritons. Five types of Bravais lattices with sub-wavelength periods, based on polymethyl methacrylate (PMMA) nanopillars, are intentionally designed. The energy overlap between the periodic PMMA scattering wave and the polariton establishes a coupling channel that controls the directional flow of polaritonic energy, as demonstrated through angle-resolved reflectance measurements. Back-space image measurements further demonstrate that the dispersion in reciprocal space can be directly and manually tuned, allowing for control over their number and their positions. The coupling between the polariton and PMMA scattering wave is further demonstrated by analyzing the reflectance using the two-port two-mode model. The symmetries of 2D Bravais lattices allow the angle between energy and momentum flow to vary widely, from 90°, 60°, 45°, and 30° to arbitrary values. By adjusting the lattice vector lengths, the position of the dispersion branch in a specific direction can be fine-tuned, enabling full-range control over polariton dispersion. This work presents the first theoretical and experimental demonstrations of guiding the direction of polaritonic energy and momentum through Bravais lattice design. △ Less

Submitted 14 January, 2025; originally announced January 2025.

Comments: 24 pages, 5 figures

Effects of disorder on the quantum transport properties in topologically nontrivial metal PbTaSe$_{2}$

Authors: Longfei Sun, Yue Sun, Qiang Hou, R. Sankar, R. Kalaivanan, Xiaofeng Xu, Zhixiang Shi, Tsuyoshi Tamegai

Abstract: Weak antilocalization (WAL), an increase in the electrical conductivity at low temperatures associated with the suppression of electron localization due to quantum interference effects, is often observed in topological materials. In this study, we report the observation of WAL in topologically nontrivial metal PbTaSe$_{2}$ at low temperatures. In the pristine sample, we identified the presence of… ▽ More Weak antilocalization (WAL), an increase in the electrical conductivity at low temperatures associated with the suppression of electron localization due to quantum interference effects, is often observed in topological materials. In this study, we report the observation of WAL in topologically nontrivial metal PbTaSe$_{2}$ at low temperatures. In the pristine sample, we identified the presence of WAL, which is attributed to the topologically protected backscattering. In order to investigate the influence of disorder on the WAL, we successively introduced controlled amounts of disorder by H$^{+}$-irradiation. As disorder increases, the dip-like magnetoresistance caused by WAL changes to a linear magnetoresistance(MR), and eventually to a quadratic MR as the electronic system becomes highly localized. This research unveils the significance of disorder in shaping the quantum transport characteristics of topological materials. △ Less

Submitted 10 January, 2025; originally announced January 2025.

Comments: 7 pages. 4 figures

Journal ref: Phys. Rev. B 111, 024502 (2025)

Low-temperature mean valence of nickel ions in pressurized La$_3$Ni$_2$O$_7$

Authors: Shu Cai, Yazhou Zhou, Hualei Sun, Kai Zhang, Jinyu Zhao, Mengwu Huo, Lucie Nataf, Yuxin Wang, Jie Li, Jing Guo, Kun Jiang, Meng Wang, Yang Ding, Wenge Yang, Yi Lu, Qingyu Kong, Qi Wu, Jiangping Hu, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: The discovery of high critical temperature (Tc) superconductivity in pressurized La$_3$Ni$_2$O$_7$ has ignited renewed excitement in the search of novel high-Tc superconducting compounds with 3d transition metals. Compared to other ambient-pressure superconductors, such as copper-oxide and iron-oxypnictides, unraveling the mechanisms of the pressure-induced superconductivity poses significant and… ▽ More The discovery of high critical temperature (Tc) superconductivity in pressurized La$_3$Ni$_2$O$_7$ has ignited renewed excitement in the search of novel high-Tc superconducting compounds with 3d transition metals. Compared to other ambient-pressure superconductors, such as copper-oxide and iron-oxypnictides, unraveling the mechanisms of the pressure-induced superconductivity poses significant and unique challenges. A critical factor in this phenomenon seems to be related to the electronic configuration of 3d orbitals, which may play a fundamental role in driving high-Tc superconductivity. However, the pressure effects on the mixed-valence states of 3d-orbital cations and their influence on the emergence of high-Tc superconductivity remain poorly understood. Here, we use high-pressure (P) and low-temperature synchrotron X-ray absorption spectroscopy to investigate the influence of pressure on the mean valence change of Ni ions in La$_3$Ni$_2$O$_7$. Our results demonstrate that at a low-temperature of 20 K, the mean valence remains relatively stable across the pressures range from 1 atm to 40 GPa. Based on analyzing the absorption data, we find that, at a critical pressure, the ambient-pressure ordered phases disappear and both the structural and the superconducting phase transition occur. The pressure-induced structural phase transition revealed by our absorption results is consistent with that determined by X-ray diffraction, offering new information for a comprehensive understanding on the pressure-induced superconductivity in La$_3$Ni$_2$O$_7$. △ Less

Submitted 24 December, 2024; originally announced December 2024.

Comments: 10 pages and 4 figures

Journal ref: Phys. Rev. B 111, 104511 (2025)

Observation of quantum-classical transition behavior of LGI in a dissipative quantum gas

Authors: Qinxuan Peng, Bolong Jiao, Hang Yu, Liao Sun, Haoyi Zhang, Jiaming Li, Le Luo

Abstract: The Leggett-Garg inequality (LGI) is a powerful tool for distinguishing between quantum and classical properties in studies of macroscopic systems. Applying the LGI to non-Hermitian systems with dissipation presents a fascinating opportunity, as competing mechanisms can either strengthen or weaken LGI violations. On one hand, dissipation-induced nonlinear interactions amplify LGI violations compar… ▽ More The Leggett-Garg inequality (LGI) is a powerful tool for distinguishing between quantum and classical properties in studies of macroscopic systems. Applying the LGI to non-Hermitian systems with dissipation presents a fascinating opportunity, as competing mechanisms can either strengthen or weaken LGI violations. On one hand, dissipation-induced nonlinear interactions amplify LGI violations compared to Hermitian systems; on the other hand, dissipation leads to decoherence, which could weaken the LGI violation. In this paper, we investigate a non-Hermitian system of ultracold Fermi gas with dissipation. Our experiments reveal that as dissipation increases, the upper bound of the third-order LGI parameter $K_3$ initially rises, reaching its maximum at the exceptional point (EP), where $K_3 = C_{21} + C_{32} - C_{31}$, encompassing three two-time correlation functions. Beyond a certain dissipation threshold, the LGI violation weakens, approaching the classical limit, indicating a quantum-to-classical transition (QCT). Furthermore, we observe that the LGI violation decreases with increasing evolution time, reinforcing the QCT in the time domain. This study provides a crucial stepping stone for using the LGI to explore the QCT in many-body open quantum systems. △ Less

Submitted 5 November, 2024; originally announced November 2024.

Transition from antiferromagnetism to altermagnetism: symmetry breaking theory

Authors: P. Zhou, X. N. Peng, Y. Z. Hu, B. R. Pan, S. M. Liu, Pengbo Lyu, L. Z. Sun

Abstract: Altermagnetism, a recently proposed magnetic phase, is distinguished by the antiferromagnetic coupling of local magnetic moments and the breaking of time-reversal symmetry. Currently, the transition from conventional antiferromagnetism to altermagnetism is not well understood. In this letter, we introduce a comprehensive symmetry-breaking theory to elucidate this transition. Our approach involves… ▽ More Altermagnetism, a recently proposed magnetic phase, is distinguished by the antiferromagnetic coupling of local magnetic moments and the breaking of time-reversal symmetry. Currently, the transition from conventional antiferromagnetism to altermagnetism is not well understood. In this letter, we introduce a comprehensive symmetry-breaking theory to elucidate this transition. Our approach involves analyzing magnetic point groups and their subgroups to identify potential pathways for the phase transition from collinear antiferromagnetism to altermagnetism. According to our theory, breaking inversion symmetry is crucial for this transition. We discovered that applying an external electric field is a highly effective method to realize altermagnetic phase, as demonstrated by first-principles calculations on the two-dimensional antiferromagnetic material MoTe. Furthermore, we show that the electronic spin polarization and spin-dependent transport can be significantly modulated by the applied vertical electric field. Our study not only sheds light on the magnetic phase transition from antiferromagnetic to altermagnetic materials but also presents a practical approach to control the charge-spin conversion ratio using an vertical electric field. △ Less

Submitted 30 October, 2024; v1 submitted 23 October, 2024; originally announced October 2024.

Interfacial performance evolution of ceramics-in-polymer composite electrolyte in solid-state lithium metal batteries

Authors: Ao Cheng, Linlin Sun, Nicola Menga, Wanyou Yang, Xin Zhang

Abstract: The incorporation of ceramics into polymers, forming solid composite electrolytes (SCEs) leads to enhanced electrical performance of all-solid-state lithium metal batteries. This is because the dispersed ceramics particles increase the ionic conductivity, while the polymer matrix leads to better contact performance between the electrolyte and the electrode. In this study, we present a model, based… ▽ More The incorporation of ceramics into polymers, forming solid composite electrolytes (SCEs) leads to enhanced electrical performance of all-solid-state lithium metal batteries. This is because the dispersed ceramics particles increase the ionic conductivity, while the polymer matrix leads to better contact performance between the electrolyte and the electrode. In this study, we present a model, based on Hybrid Elements Methods, for the time-dependent Li metal and SCE rough interface mechanics, taking into account for the oxide (ceramics) inclusions (using the Equivalent Inclusion method), and the viscoelasticity of the matrix. We study the effect of LLTO particle size, weight concentration, and spatial distribution on the interface mechanical and electrical response. Moreover, considering the viscoelastic spectrum of a real PEO matrix, under a given stack pressure, we investigate the evolution over time of the mechanical and electrical performance of the interface. The presented theoretical/numerical model might be pivotal in tailoring the development of advanced solid state batteries with superior performance; indeed, we found that conditions in the SCE mixture which optimize both the contact resistivity and the interface stability in time. △ Less

Submitted 24 September, 2024; originally announced September 2024.

Journal ref: International Journal of Engineering Science 204 (2024) 104137

General Stacking Theory for Altermagnetism in Bilayer Systems

Authors: Baoru Pan, Pan Zhou, Pengbo Lyu, Huaping Xiao, Xuejuan Yang, Lizhong Sun

Abstract: Two-dimensional (2D) altermagnetism was recently proposed to be attainable in twisted antiferromagnetic bilayers providing an experimentally feasible approach to realize it in 2D materials. Nevertheless, a comprehensive understanding of the mechanism governing the appearance of altermagnetism in bilayer systems is still absent. In present letter, we address this gap by introducing a general stacki… ▽ More Two-dimensional (2D) altermagnetism was recently proposed to be attainable in twisted antiferromagnetic bilayers providing an experimentally feasible approach to realize it in 2D materials. Nevertheless, a comprehensive understanding of the mechanism governing the appearance of altermagnetism in bilayer systems is still absent. In present letter, we address this gap by introducing a general stacking theory (GST) as a key condition for the emergence of altermagnetism in bilayer systems. The GST provides straightforward criteria to predict whether a bilayer demonstrates altermagnetic spin splitting, solely based on the layer groups of the composing monolayers. According to the GST, only seven point groups of bilayers facilitate the emergence of altermagnetism. It is revealed that, beyond the previously proposed antiferromagnetic twisted vdW stacking, altermagnetism can even emerge in bilayers formed through the symmetrically restricted direct stacking of two monolayers. By combining the GST and first-principles calculations, we present illustrative examples of bilayers demonstrating altermagnetism. Our work establishes a robust framework for designing diverse bilayer systems with altermagnetism, thereby opening up new avenues for both fundamental research and practical applications in this field. △ Less

Submitted 13 September, 2024; v1 submitted 10 September, 2024; originally announced September 2024.

Comments: (accepted by Phys. Rev. Lett.)

Multi-channel machine learning based nonlocal kinetic energy density functional for semiconductors

Authors: Liang Sun, Mohan Chen

Abstract: The recently proposed machine learning-based physically-constrained nonlocal (MPN) kinetic energy density functional (KEDF) can be used for simple metals and their alloys [Phys. Rev. B 109, 115135 (2024)]. However, the MPN KEDF does not perform well for semiconductors. Here we propose a multi-channel MPN (CPN) KEDF, which extends the MPN KEDF to semiconductors by integrating information collected… ▽ More The recently proposed machine learning-based physically-constrained nonlocal (MPN) kinetic energy density functional (KEDF) can be used for simple metals and their alloys [Phys. Rev. B 109, 115135 (2024)]. However, the MPN KEDF does not perform well for semiconductors. Here we propose a multi-channel MPN (CPN) KEDF, which extends the MPN KEDF to semiconductors by integrating information collected from multiple channels, with each channel featuring a specific length scale in real space. The CPN KEDF is systematically tested on silicon and binary semiconductors. We find that the multi-channel design for KEDF is beneficial for machine-learning-based models in capturing the characteristics of semiconductors, particularly in handling covalent bonds. In particular, the CPN5 KEDF, which utilizes five channels, demonstrates excellent accuracy across all tested systems. These results offer a new path for generating KEDFs for semiconductors. △ Less

Submitted 7 October, 2024; v1 submitted 27 August, 2024; originally announced August 2024.

Comments: 12 pages, 5 figures

PDDFormer: Pairwise Distance Distribution Graph Transformer for Crystal Material Property Prediction

Authors: Xiangxiang Shen, Zheng Wan, Lingfeng Wen, Licheng Sun, Ou Yang Ming Jie, JiJUn Cheng, Xuan Tang, Xian Wei

Abstract: The crystal structure can be simplified as a periodic point set repeating across the entire three-dimensional space along an underlying lattice. Traditionally, methods for representing crystals rely on descriptors like lattice parameters, symmetry, and space groups to characterize the structure. However, in reality, atoms in material always vibrate above absolute zero, causing continuous fluctuati… ▽ More The crystal structure can be simplified as a periodic point set repeating across the entire three-dimensional space along an underlying lattice. Traditionally, methods for representing crystals rely on descriptors like lattice parameters, symmetry, and space groups to characterize the structure. However, in reality, atoms in material always vibrate above absolute zero, causing continuous fluctuations in their positions. This dynamic behavior disrupts the underlying periodicity of the lattice, making crystal graphs based on static lattice parameters and conventional descriptors discontinuous under even slight perturbations. To this end, chemists proposed the Pairwise Distance Distribution (PDD) method, which has been used to distinguish all periodic structures in the world's largest real materials collection, the Cambridge Structural Database. However, achieving the completeness of PDD requires defining a large number of neighboring atoms, resulting in high computational costs. Moreover, it does not account for atomic information, making it challenging to directly apply PDD to crystal material property prediction tasks. To address these challenges, we propose the atom-Weighted Pairwise Distance Distribution (WPDD) and Unit cell Pairwise Distance Distribution (UPDD) for the first time, incorporating them into the construction of multi-edge crystal graphs. Based on this, we further developed WPDDFormer and UPDDFormer, graph transformer architecture constructed using WPDD and UPDD crystal graphs. We demonstrate that this method maintains the continuity and completeness of crystal graphs even under slight perturbations in atomic positions. △ Less

Submitted 24 November, 2024; v1 submitted 23 August, 2024; originally announced August 2024.

Comments: 8 pages, 3 figures

Tunable interfacial Rashba spin-orbit coupling in asymmetric Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures

Authors: Hanzhi Ruan, Zhenghang Zhi, Yuyang Wu, Jiuming Liu, Puyang Huang, Shan Yao, Xinqi Liu, Chenjia Tang, Qi Yao, Lu Sun, Yifan Zhang, Yujie Xiao, Renchao Che, Xufeng Kou

Abstract: The manipulation of Rashba-type spin-orbit coupling (SOC) in molecular beam epitaxy-grown Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures is reported. The effective band bending provides robust two-dimensional quantum confinement, while the unidirectional built-in electric field from the asymmetric hetero-interfaces results in pronounced Rashba SOC strength. By tuning the Al concentrati… ▽ More The manipulation of Rashba-type spin-orbit coupling (SOC) in molecular beam epitaxy-grown Al$_x$In$_{1-x}$Sb/InSb/CdTe quantum well heterostructures is reported. The effective band bending provides robust two-dimensional quantum confinement, while the unidirectional built-in electric field from the asymmetric hetero-interfaces results in pronounced Rashba SOC strength. By tuning the Al concentration in the top Al$_x$In$_{1-x}$Sb barrier layer, the optimal structure with $x = 0.15$ shows the largest Rashba coefficient of 0.23 eV-Angstrom. and the highest low-temperature electron mobility of 4400 cm$^2$/Vs . Quantitative investigations of the weak anti-localization effect further confirm the dominant D'yakonov-Perel (DP) spin relaxation mechanism during charge-to-spin conversion. These findings highlight the significance of quantum well engineering in shaping magneto-resistance responses, and narrow bandgap semiconductor-based heterostructures may offer a reliable platform for energy-efficient spintronic applications. △ Less

Submitted 19 August, 2024; originally announced August 2024.

Feedback loop dependent charge density wave imaging by scanning tunneling spectroscopy

Authors: Alessandro Scarfato, Árpád Pásztor, Lihuan Sun, Ivan Maggio-Aprile, Vincent Pasquier, Tejas Parasram Singar, Andreas Ørsted, Ishita Pushkarna, Marcello Spera, Enrico Giannini, Christoph Renner

Abstract: Scanning Tunneling Spectroscopy (STS) is a unique technique to probe the local density of states (LDOS) at the atomic scale by measuring the tunneling conductance between a sharp tip and a sample surface. However, the technique suffers of well-known limitations, the so-called set-point effect, which can potentially introduce artifacts in the measurements. We compare several STS imaging schemes app… ▽ More Scanning Tunneling Spectroscopy (STS) is a unique technique to probe the local density of states (LDOS) at the atomic scale by measuring the tunneling conductance between a sharp tip and a sample surface. However, the technique suffers of well-known limitations, the so-called set-point effect, which can potentially introduce artifacts in the measurements. We compare several STS imaging schemes applied to the LDOS modulations of the charge density wave state on atomically flat surfaces, and demonstrate that only constant-height STS is capable of mapping the intrinsic LDOS. In the constant-current STS, commonly used and easier-to-implement, the tip-sample distance variations imposed by the feedback loop result in set-point-dependent STS images and possibly mislead the identification of the CDW gap edges. △ Less

Submitted 24 July, 2024; v1 submitted 5 June, 2024; originally announced June 2024.

Comments: 7 pages, 6 figures

Direct visualization of the impurity occupancy roadmap in Ni-substituted van der Waals ferromagnet Fe3GaTe2

Authors: Jian Yuan, Haonan Wang, Xiaofei Hou, Binshuo Zhang, Yurui Wei, Jiangteng Guo, Lu Sun, Zhenhai Yu, Zhikai Li, Xiangqi Liu, Wei Xia, Xia Wang, Xuerong Liu, Yulin Chen, Shihao Zhang, Xuewen Fu, Ke Qu, Zhenzhong Yang, Yanfeng Guo

Abstract: Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadma… ▽ More Impurity substitution is a general strategy to study the intrinsic properties of a quantum material. However, when the target element has more than one Wyckoff position in the lattice, it is a big challenge but with extreme necessity to know the exact position and order of the occupancy of impurity atoms. Via comprehensive experimental and theoretical investigations, we establish herein the roadmap for Ni substitution in Fe3GaTe2, a van der Waals ferromagnet with the Curie temperature TC even reaching ~ 380 K. The results unambiguously reveal that in (Fe1-xNix)3GaTe2, Ni atoms initially form an van der Waals interlayer gap Ni3 sites when x < 0.1, and then gradually occupy the Fe2 sites. After replacing the Fe2 sites at x of ~ 0.75, they start to substitute for the Fe1 sites and eventually realize a full occupation at x = 1.0. Accordingly, TC and saturation magnetic moments of (Fe1-xNix)3GaTe2 both show nonlinear decrease, which is tightly tied to the Ni occupancy order as well as the different roles of Ni3, Fe1 and Fe2 sites in the spin Hamiltonian. The results not only yield fruitful insights into the essential roles of different Fe sites in producing the above room temperature high TC, but also set a paradigm for future impurity substitution study on other quantum materials. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: 24 pages,5 main figures+4 SI figures+2 SI tables

Extremely long transverse optical needle focus for reflective metalens enabled by monolayer MoS$_2$

Authors: Zhonglin Li, Kangyu Gao, Yingying Wang, Ruitong Bie, Dongliang Yang, Tianze Yu, Renxi Gao, Wenjun Liu, Bo Zhong, Linfeng Sun

Abstract: Line-scan mode facilitates fast-speed and high-throughput imaging with developing a suitable optical transverse needle focus. Metasurface with periodic structures such as diffractive rings, ellipses, and gratings could enable discrete focus evolving into line focus under momentum conservation, but still face the challenge of extremely low light power utilization brought by inevitably multiple high… ▽ More Line-scan mode facilitates fast-speed and high-throughput imaging with developing a suitable optical transverse needle focus. Metasurface with periodic structures such as diffractive rings, ellipses, and gratings could enable discrete focus evolving into line focus under momentum conservation, but still face the challenge of extremely low light power utilization brought by inevitably multiple high-order diffractions. In addition, the designed focus requires the selection of particular optical functional materials. High dielectric constants in atomic transition metal dichalcogenides make significant phase modulation by bringing phase singularity at zero-reflection possible. However, no light power is available for use at zero-reflection and a balance between phase and amplitude modulation is needed. In this work, above issues are simultaneously solved by designing a monolayer MoS2 based Fresnel strip structure. An optical needle primary focus with a transverse length of 40 μm (~80 λ) is obtained, which is the longest value recorded so far, together with a sub-diffraction-limited lateral spot and a broad working wavelength range. This specially developed structure not only concentrates light power in primary diffraction by breaking restriction of momentum conservation, but also guarantees a consistent phase across different strips. The novel optical manipulation way provided here together with the longer focus length for flat optics will show promising applications in biology, oncology, nanofabrication, energy harvesting, and optical information processing. △ Less

Submitted 11 May, 2024; originally announced May 2024.

Comments: 22 pages, 5 figures

MatterSim: A Deep Learning Atomistic Model Across Elements, Temperatures and Pressures

Authors: Han Yang, Chenxi Hu, Yichi Zhou, Xixian Liu, Yu Shi, Jielan Li, Guanzhi Li, Zekun Chen, Shuizhou Chen, Claudio Zeni, Matthew Horton, Robert Pinsler, Andrew Fowler, Daniel Zügner, Tian Xie, Jake Smith, Lixin Sun, Qian Wang, Lingyu Kong, Chang Liu, Hongxia Hao, Ziheng Lu

Abstract: Accurate and fast prediction of materials properties is central to the digital transformation of materials design. However, the vast design space and diverse operating conditions pose significant challenges for accurately modeling arbitrary material candidates and forecasting their properties. We present MatterSim, a deep learning model actively learned from large-scale first-principles computatio… ▽ More Accurate and fast prediction of materials properties is central to the digital transformation of materials design. However, the vast design space and diverse operating conditions pose significant challenges for accurately modeling arbitrary material candidates and forecasting their properties. We present MatterSim, a deep learning model actively learned from large-scale first-principles computations, for efficient atomistic simulations at first-principles level and accurate prediction of broad material properties across the periodic table, spanning temperatures from 0 to 5000 K and pressures up to 1000 GPa. Out-of-the-box, the model serves as a machine learning force field, and shows remarkable capabilities not only in predicting ground-state material structures and energetics, but also in simulating their behavior under realistic temperatures and pressures, signifying an up to ten-fold enhancement in precision compared to the prior best-in-class. This enables MatterSim to compute materials' lattice dynamics, mechanical and thermodynamic properties, and beyond, to an accuracy comparable with first-principles methods. Specifically, MatterSim predicts Gibbs free energies for a wide range of inorganic solids with near-first-principles accuracy and achieves a 15 meV/atom resolution for temperatures up to 1000K compared with experiments. This opens an opportunity to predict experimental phase diagrams of materials at minimal computational cost. Moreover, MatterSim also serves as a platform for continuous learning and customization by integrating domain-specific data. The model can be fine-tuned for atomistic simulations at a desired level of theory or for direct structure-to-property predictions, achieving high data efficiency with a reduction in data requirements by up to 97%. △ Less

Submitted 10 May, 2024; v1 submitted 8 May, 2024; originally announced May 2024.

Holistic numerical simulation of a quenching process on a real-size multifilamentary superconducting coil

Authors: Cun Xue, Han-Xi Ren, Peng Jia, Qing-Yu Wang, Wei Liu, Xian-Jin Ou, Liang-Ting Sun, Alejandro V Silhanek

Abstract: Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magne… ▽ More Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps eventually leading to irreversible damage. This issue has long plagued high-$J_c$ Nb$_3$Sn wires at the core of high-field magnets. In this study, we introduce a groundbreaking large-scale GPU-optimized algorithm aimed at tackling the complex intertwined effects of electromagnetism, heating, and strain acting concomitantly during the quenching process of superconducting coils. We validate our model by conducting comparisons with magnetization measurements obtained from short multifilamentary Nb$_3$Sn wires and further experimental tests conducted on solenoid coils while subject to ramping transport currents. Furthermore, leveraging our developed numerical algorithm, we unveil the dynamic propagation mechanisms underlying thermomagnetic instabilities (including flux jumps and quenches) within the coils. Remarkably, our findings reveal that the velocity field of flux jumps and quenches within the coil is correlated with the amount of Joule heating experienced by each wire over a specific time interval, rather than solely being dependent on instantaneous Joule heating or maximum temperature. These insights have the potential to pave the way for optimizing the design of next-generation superconducting magnets, thereby directly influencing a wide array of technologically relevant and multidisciplinary applications. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Superconducting-transition-temperature dependence of superfluid density and conductivity in pressurized cuprate superconductors

Authors: Jinyu Zhao, Shu Cai, Yiwen Chen, Genda Gu, Hongtao Yan, Jing Guo, Jinyu Han, Pengyu Wang, Yazhou Zhou, Yanchun Li, Xiaodong Li, Zhian Ren, Qi Wu, Xingjiang Zhou, Yang Ding, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: What factors fundamentally determine the value of superconducting transition temperature (Tc) in high temperature superconductors has been the subject of intense debate. Following the establishment of an empirical law known as Homes'law, there is a growing consensus in the community that the Tc value of the cuprate superconductors is closely linked to its superfluid density and conductivity. Howev… ▽ More What factors fundamentally determine the value of superconducting transition temperature (Tc) in high temperature superconductors has been the subject of intense debate. Following the establishment of an empirical law known as Homes'law, there is a growing consensus in the community that the Tc value of the cuprate superconductors is closely linked to its superfluid density and conductivity. However, all the data supporting this empirical law have been obtained from the ambient-pressure superconductors. In this study, we present the first high-pressure results about the connection of these two quantities with Tc, through the studies on the Bi1.74Pb0.38Sr1.88CuO6+delta and Bi2Sr2CaCu2O8+delta, in which the value of their high-pressure resistivity (the reciprocal of conductivity) is achieved by adopting our newly established method, while the value of superfluid density is extracted using the Homes'law. We highlight that the Tc values are strongly linked the two joint response factors of magnetic field and electric field, i.e. superfluid density and conductivity, respectively, implying that the physics governing the determination of Tc is influenced by the intrinsic electromagnetic fields of the system. △ Less

Submitted 9 October, 2024; v1 submitted 27 February, 2024; originally announced February 2024.

Comments: 11 pages, 3 figures

Journal ref: Chinese Phys. Lett. 41(2024)047401

A novel method for determining the resistivity of compressed superconducting materials

Authors: Liling Sun, Qi Wu, Shu Cai, Yang Ding, Ho-kwang Mao

Abstract: The resistivity of a superconductor in its normal state plays a critical role in determining its superconducting ground state. However, measuring the resistivity of a material under high pressure has long presented a significant technical challenge due to pressure-induced changes in the crystallographic directions, especially for samples with anisotropic layered structures like high-Tc superconduc… ▽ More The resistivity of a superconductor in its normal state plays a critical role in determining its superconducting ground state. However, measuring the resistivity of a material under high pressure has long presented a significant technical challenge due to pressure-induced changes in the crystallographic directions, especially for samples with anisotropic layered structures like high-Tc superconductors and other intriguing quantum materials. Here, we are the first to propose a novel and effective method for determining high-pressure resistivity, which relies on the ambient-pressure resistivity, initial sample sizes, lattice parameters, high-pressure resistance, and lattice parameters measured from the same sample. Its validity has been confirmed through our investigations of pressurized copper-oxide superconductors, which demonstrates that this method provides new possibilities for researchers conducting high-pressure studies related to resistivity of these materials. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Comments: 8 pages, 1 figure

Journal ref: Matter Radiat. Extremes 9 (2024) 043001

Unveiling a Novel Metal-to-Metal Transition in LuH2: Critically Challenging Superconductivity Claims in Lutetium Hydrides

Authors: Dong Wang, Ningning Wang, Caoshun Zhang, Chunsheng Xia, Weicheng Guo, Xia Yin, Kejun Bu, Takeshi Nakagawa, Jianbo Zhang, Federico Gorelli, Philip Dalladay-Simpson, Thomas Meier, Xujie Lü, Liling Sun, Jinguang Cheng, Qiaoshi Zeng, Yang Ding, Ho-kwang Mao

Abstract: Following the recent report by Dasenbrock-Gammon et al. (2023) of near-ambient superconductivity in nitrogen-doped lutetium trihydride (LuH3-δNε), significant debate has emerged surrounding the composition and interpretation of the observed sharp resistance drop. Here, we meticulously revisit these claims through comprehensive characterization and investigations. We definitively identify the repor… ▽ More Following the recent report by Dasenbrock-Gammon et al. (2023) of near-ambient superconductivity in nitrogen-doped lutetium trihydride (LuH3-δNε), significant debate has emerged surrounding the composition and interpretation of the observed sharp resistance drop. Here, we meticulously revisit these claims through comprehensive characterization and investigations. We definitively identify the reported material as lutetium dihydride (LuH2), resolving the ambiguity surrounding its composition. Under similar conditions (270-295 K and 1-2 GPa), we replicate the reported sharp decrease in electrical resistance with a 30% success rate, aligning with Dasenbrock-Gammon et al.'s observations. However, our extensive investigations reveal this phenomenon to be a novel, pressure-induced metal-to-metal transition intrinsic to LuH2, distinct from superconductivity. Intriguingly, nitrogen doping exerts minimal impact on this transition. Our work not only elucidates the fundamental properties of LuH2 and LuH3 but also critically challenges the notion of superconductivity in these lutetium hydride systems. These findings pave the way for future research on lutetium hydride systems while emphasizing the crucial importance of rigorous verification in claims of ambient temperature superconductivity. △ Less

Submitted 28 January, 2024; v1 submitted 25 January, 2024; originally announced January 2024.

Journal ref: Matter Radiat. Extremes 9, 037401 (2024)

BCS-BEC crossover in atomic Fermi gases in quasi-two-dimensional Lieb lattices: Effects of flat band and finite temperature

Authors: Hao Deng, Lin Sun, Chuping Li, Yuxuan Wu, Junru Wu, Qijin Chen

Abstract: We investigate the finite-temperature superfluid behavior of ultracold atomic Fermi gases in quasi-two-dimensional Lieb lattices with a short-range attractive interaction, using a pairing fluctuation theory within the BCS-BEC crossover framework. We find that the presence of a flat band, along with van Hove singularities, leads to exotic quantum phenomena. As the Fermi level enters the flat band,… ▽ More We investigate the finite-temperature superfluid behavior of ultracold atomic Fermi gases in quasi-two-dimensional Lieb lattices with a short-range attractive interaction, using a pairing fluctuation theory within the BCS-BEC crossover framework. We find that the presence of a flat band, along with van Hove singularities, leads to exotic quantum phenomena. As the Fermi level enters the flat band, both the gap and the superfluid transition temperature $T_c$ as a function of interaction change from a conventional exponential behavior into an unusual power law, and the evolution of superfluid densities with temperature also follows a power law even at weak interactions. The quantum geometric effects, manifested by an enhanced effective pair hopping integral, may contribute significantly to both $T_c$ and the superfluidities. As the chemical potential crosses the van Hove singularities in the weak interaction regime, the nature of pairing changes between particle-like and hole-like. A pair density wave state emerges at high densities with a relatively strong interaction strength. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 10 pages, 6 figures. arXiv admin note: text overlap with arXiv:2310.12944

Possible manifestation of topological superconductivity and Majorana bound states in the microwave response of thin FeSe1-xTex film

Authors: N. T. Cherpak, A. A. Barannik, Y. -S. He, L. Sun, Y. Wu, S. I. Melnyk

Abstract: The paper analyzes the characteristics of the microwave (MW) response of FeSe1-xTex films based on the results of measuring the impedance properties of the films in the X-band for two orientations of the film in the MW magnetic field, perpendicular and parallel. The analysis of the temperature dependence of the microwave response of a film with a perpendicular orientation (in which the peculiarity… ▽ More The paper analyzes the characteristics of the microwave (MW) response of FeSe1-xTex films based on the results of measuring the impedance properties of the films in the X-band for two orientations of the film in the MW magnetic field, perpendicular and parallel. The analysis of the temperature dependence of the microwave response of a film with a perpendicular orientation (in which the peculiarity of the response is manifested) was carried out by means of physical considerations, taking into account also the results of the research of this superconductor by other authors using the ARPES technique and tunneling spectroscopy. It was concluded that with perpendicular orientation, two competing mechanisms of MW energy dissipation in the film can occur, one of which leads to the increase in energy dissipation caused by magnetic vortices with an MW field, and the other to its decrease due to the emergence of Majorana bound states with zero energy △ Less

Submitted 18 December, 2023; originally announced December 2023.

MatterGen: a generative model for inorganic materials design

Authors: Claudio Zeni, Robert Pinsler, Daniel Zügner, Andrew Fowler, Matthew Horton, Xiang Fu, Sasha Shysheya, Jonathan Crabbé, Lixin Sun, Jake Smith, Bichlien Nguyen, Hannes Schulz, Sarah Lewis, Chin-Wei Huang, Ziheng Lu, Yichi Zhou, Han Yang, Hongxia Hao, Jielan Li, Ryota Tomioka, Tian Xie

Abstract: The design of functional materials with desired properties is essential in driving technological advances in areas like energy storage, catalysis, and carbon capture. Generative models provide a new paradigm for materials design by directly generating entirely novel materials given desired property constraints. Despite recent progress, current generative models have low success rate in proposing s… ▽ More The design of functional materials with desired properties is essential in driving technological advances in areas like energy storage, catalysis, and carbon capture. Generative models provide a new paradigm for materials design by directly generating entirely novel materials given desired property constraints. Despite recent progress, current generative models have low success rate in proposing stable crystals, or can only satisfy a very limited set of property constraints. Here, we present MatterGen, a model that generates stable, diverse inorganic materials across the periodic table and can further be fine-tuned to steer the generation towards a broad range of property constraints. To enable this, we introduce a new diffusion-based generative process that produces crystalline structures by gradually refining atom types, coordinates, and the periodic lattice. We further introduce adapter modules to enable fine-tuning towards any given property constraints with a labeled dataset. Compared to prior generative models, structures produced by MatterGen are more than twice as likely to be novel and stable, and more than 15 times closer to the local energy minimum. After fine-tuning, MatterGen successfully generates stable, novel materials with desired chemistry, symmetry, as well as mechanical, electronic and magnetic properties. Finally, we demonstrate multi-property materials design capabilities by proposing structures that have both high magnetic density and a chemical composition with low supply-chain risk. We believe that the quality of generated materials and the breadth of MatterGen's capabilities represent a major advancement towards creating a universal generative model for materials design. △ Less

Submitted 29 January, 2024; v1 submitted 6 December, 2023; originally announced December 2023.

Comments: 13 pages main text, 35 pages supplementary information

Investigations of key issues on the reproducibility of high-Tc superconductivity emerging from compressed La3Ni2O7

Authors: Yazhou Zhou, Jing Guo, Shu Cai, Hualei Sun, Pengyu Wang, Jinyu Zhao, Jinyu Han, Xintian Chen, Yongjin Chen, Qi Wu, Yang Ding, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: Recently, the signatures of superconductivity near 80 K have been discovered in the single crystal of La3Ni2O7 under pressure, which makes it a new candidate of the high-temperature superconductors dominated by 3d transition elements after the cuprate and iron-pnictide superconductors. However, there are several critical questions that have been perplexing the scientific community. These questions… ▽ More Recently, the signatures of superconductivity near 80 K have been discovered in the single crystal of La3Ni2O7 under pressure, which makes it a new candidate of the high-temperature superconductors dominated by 3d transition elements after the cuprate and iron-pnictide superconductors. However, there are several critical questions that have been perplexing the scientific community. These questions include (1) what factors contribute to the inconsistent reproducibility of the experimental results? (2) what is the fundamental nature of pressure-induced superconductivity: bulk or non-bulk (filamentary-like)? (3) where does the superconducting phase locate within the sample if it is filamentary-like? (4) is the oxygen content important for developing and stabilizing its superconductivity? In this study, we employ comprehensive high-pressure techniques to address these crucial issues. Through our modulated ac susceptibility measurements, we are the first to find that the superconductivity in this nickelate is filamentary-like. Our scanning transmission electron microscopy (STEM) investigations suggest that the filamentary-like superconductivity most likely emerges at the interface between the La3Ni2O7 and La4Ni3O10 phases. By tuning the oxygen content on the polycrystalline La3Ni2O7, we also find that the oxygen content plays vital role for developing and stabilizing its superconductivity. The upper and lower bounds of the oxygen content are 7.35 and 6.89, respectively. Our results provide not only new insights into understanding the puzzling issues in this material, but also significant information for achieving a better understanding on the superconductivity of this material. △ Less

Submitted 4 February, 2025; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 25 pages, 6 figures

Journal ref: Matter and Radiation at Extremes 10, 027801(2025)

Overcoming the Size Limit of First Principles Molecular Dynamics Simulations with an In-Distribution Substructure Embedding Active Learner

Authors: Lingyu Kong, Jielan Li, Lixin Sun, Han Yang, Hongxia Hao, Chi Chen, Nongnuch Artrith, Jose Antonio Garrido Torres, Ziheng Lu, Yichi Zhou

Abstract: Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to e… ▽ More Large-scale first principles molecular dynamics are crucial for simulating complex processes in chemical, biomedical, and materials sciences. However, the unfavorable time complexity with respect to system sizes leads to prohibitive computational costs when the simulation contains over a few hundred atoms in practice. We present an In-Distribution substructure Embedding Active Learner (IDEAL) to enable efficient simulation of large complex systems with quantum accuracy by maintaining a machine learning force field (MLFF) as an accurate surrogate to the first principles methods. By extracting high-uncertainty substructures into low-uncertainty atom environments, the active learner is allowed to concentrate on and learn from small substructures of interest rather than carrying out intractable quantum chemical computations on large structures. IDEAL is benchmarked on various systems and shows sub-linear complexity, accelerating the simulation thousands of times compared with conventional active learning and millions of times compared with pure first principles simulations. To demonstrate the capability of IDEAL in practical applications, we simulated a polycrystalline lithium system composed of one million atoms and the full ammonia formation process in a Haber-Bosch reaction on a 3-nm Iridium nanoparticle catalyst on a computing node comprising one single A100 GPU and 24 CPU cores. △ Less

Submitted 14 November, 2023; v1 submitted 14 November, 2023; originally announced November 2023.

General-purpose machine-learned potential for 16 elemental metals and their alloys

Authors: Keke Song, Rui Zhao, Jiahui Liu, Yanzhou Wang, Eric Lindgren, Yong Wang, Shunda Chen, Ke Xu, Ting Liang, Penghua Ying, Nan Xu, Zhiqiang Zhao, Jiuyang Shi, Junjie Wang, Shuang Lyu, Zezhu Zeng, Shirong Liang, Haikuan Dong, Ligang Sun, Yue Chen, Zhuhua Zhang, Wanlin Guo, Ping Qian, Jian Sun, Paul Erhart , et al. (3 additional authors not shown)

Abstract: Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete repre… ▽ More Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete representation of the chemical space, we show, via principal component analysis and diverse test datasets, that employing one-component and two-component systems suffices. Our unified UNEP-v1 model exhibits superior performance across various physical properties compared to a widely used embedded-atom method potential, while maintaining remarkable efficiency. We demonstrate our approach's effectiveness through reproducing experimentally observed chemical order and stable phases, and large-scale simulations of plasticity and primary radiation damage in MoTaVW alloys. This work represents a significant leap towards a unified general-purpose MLP encompassing the periodic table, with profound implications for materials science. △ Less

Submitted 12 June, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Comments: Main text with 17 pages and 8 figures; supplementary with 26 figures and 4 tables; source code and training/test data available

Journal ref: Nature Communications 15, 10208 (2024)

Deconfined quantum critical point lost in pressurized SrCu2(BO3)2

Authors: Jing Guo, Pengyu Wang, Cheng Huang, Bin-Bin Chen, Wenshan Hong, Shu Cai, Jinyu Zhao, Jinyu Han, Xintian Chen, Yazhou Zhou, Shiliang Li, Qi Wu, Zi Yang Meng, Liling Sun

Abstract: In the field of correlated electron materials, the relation between the resonating spin singlet and antiferromagnetic states has long been an attractive topic for understanding of the interesting macroscopic quantum phenomena, such as the ones emerging from magnetic frustrated materials, antiferromagnets and high-temperature superconductors. SrCu2(BO3)2 is a well-known quantum magnet, and it is th… ▽ More In the field of correlated electron materials, the relation between the resonating spin singlet and antiferromagnetic states has long been an attractive topic for understanding of the interesting macroscopic quantum phenomena, such as the ones emerging from magnetic frustrated materials, antiferromagnets and high-temperature superconductors. SrCu2(BO3)2 is a well-known quantum magnet, and it is theoretically expected to be the candidate of correlated electron material for clarifying the existence of a pressure-induced deconfined quantum critical point (DQCP), featured by a continuous quantum phase transition, between the plaquette-singlet (PS) valence bond solid phase and the antiferromagnetic (AF) phase. However, the real nature of the transition is yet to be identified experimentally due to the technical challenge. Here we show the experimental results for the first time, through the state-of-the-art high-pressure heat capacity measurement, that the PS-AF phase transition of the pressurized SrCu2(BO3)2 at zero field is clearly a first-order one. Our result clarifies the more than two-decade long debates about this key issue, and resonates nicely with the recent quantum entanglement understanding that the theoretically predicted DQCPs in representative lattice models are actually a first-order transition. Intriguingly, we also find that the transition temperatures of the PS and AF phase meet at the same pressure-temperature point, which signifies a bi-critical point as those observed in Fe-based superconductor and heavy-fermion compound, and constitutes the first experimental discovery of the pressure-induced bi-critical point in frustrated magnets. Our results provide fresh information for understanding the evolution among different spin states of correlated electron materials under pressure. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 6 pages, 4 figures

Journal ref: communications physics 8, 75 (2025)

Machine learning based nonlocal kinetic energy density functional for simple metals and alloys

Authors: Liang Sun, Mohan Chen

Abstract: Developing an accurate kinetic energy density functional (KEDF) remains a major hurdle in orbital-free density functional theory. We propose a machine learning based physical-constrained nonlocal (MPN) KEDF and implement it with the usage of the bulk-derived local pseudopotentials and plane wave basis sets in the ABACUS package. The MPN KEDF is designed to satisfy three exact physical constraints:… ▽ More Developing an accurate kinetic energy density functional (KEDF) remains a major hurdle in orbital-free density functional theory. We propose a machine learning based physical-constrained nonlocal (MPN) KEDF and implement it with the usage of the bulk-derived local pseudopotentials and plane wave basis sets in the ABACUS package. The MPN KEDF is designed to satisfy three exact physical constraints: the scaling law of electron kinetic energy, the free electron gas limit, and the non-negativity of Pauli energy density. The MPN KEDF is systematically tested for simple metals, including Li, Mg, Al, and 59 alloys. We conclude that incorporating nonlocal information for designing new KEDFs and obeying exact physical constraints are essential to improve the accuracy, transferability, and stability of ML-based KEDF. These results shed new light on the construction of ML-based functionals. △ Less

Submitted 3 March, 2024; v1 submitted 24 October, 2023; originally announced October 2023.

Comments: 10 pages, 5 figures

Superconductivity in the high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx with possible nontrivial band topology

Authors: Lingyong Zeng, Xunwu Hu, Yazhou Zhou, Mebrouka Boubeche, Ruixin Guo, Yang Liu, Si-Chun Luo, Shu Guo, Kuan Li, Peifeng Yu, Chao Zhang, Wei-Ming Guo, Liling Sun, Dao-Xin Yao, Huixia Luo

Abstract: Topological superconductors have drawn significant interest from the scientific community due to the accompanying Majorana fermions. Here, we report the discovery of electronic structure and superconductivity in high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx (x = 1 and 0.8) combined with experiments and first-principles calculations. The Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx high-entropy ceramics show bu… ▽ More Topological superconductors have drawn significant interest from the scientific community due to the accompanying Majorana fermions. Here, we report the discovery of electronic structure and superconductivity in high-entropy ceramics Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx (x = 1 and 0.8) combined with experiments and first-principles calculations. The Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2Cx high-entropy ceramics show bulk type-II superconductivity with Tc about 4.00 K (x = 1) and 2.65 K (x = 0.8), respectively. The specific heat jump is equal to 1.45 (x = 1) and 1.52 (x = 0.8), close to the expected value of 1.43 for the BCS superconductor in the weak coupling limit. The high-pressure resistance measurements show that a robust superconductivity against high physical pressure in Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, with a slight Tc variation of 0.3 K within 82.5 GPa. Furthermore, the first-principles calculations indicate that the Dirac-like point exists in the electronic band structures of Ti0.2Zr0.2Nb0.2Mo0.2Ta0.2C, which is potentially a topological superconductor. The Dirac-like point is mainly contributed by the d orbitals of transition metals M and the p orbitals of C. The high-entropy ceramics provide an excellent platform for the fabrication of novel quantum devices, and our study may spark significant future physics investigations in this intriguing material. △ Less

Submitted 22 October, 2023; originally announced October 2023.

Comments: 28 pages, 7 figures,The manuscript with the same title will be published by Advanced Science

Flat band effects on the ground-state BCS-BEC crossover in atomic Fermi gases in a quasi-two-dimensional Lieb lattice

Authors: Hao Deng, Chuping Li, Yuxuan Wu, Lin Sun, Qijin Chen

Abstract: The ground-state superfluid behavior of ultracold atomic Fermi gases with a short-range attractive interaction in a quasi-two-dimensional Lieb lattice is studied using BCS mean-field theory, within the context of BCS-BEC crossover. We find that the flat band leads to nontrivial exotic effects. As the Fermi level enters the flat band, both the pairing gap and the in-plane superfluid density exhibit… ▽ More The ground-state superfluid behavior of ultracold atomic Fermi gases with a short-range attractive interaction in a quasi-two-dimensional Lieb lattice is studied using BCS mean-field theory, within the context of BCS-BEC crossover. We find that the flat band leads to nontrivial exotic effects. As the Fermi level enters the flat band, both the pairing gap and the in-plane superfluid density exhibit an unusual power law as a function of interaction, with strongly enhanced quantum geometric effects, in addition to a dramatic increase of compressibility as the interaction approaches the BCS limit. As the Fermi level crosses the van Hove singularities, the character of pairing changes from particle-like to hole-like or vice versa. We present the computed phase diagram, in which a pair density wave state emerges at high densities with relatively strong interaction strength. △ Less

Submitted 25 March, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 9 pages, 6 figures in color

Journal ref: Ann. Phys. 463, 169639 (2024)

Competition of electronic correlation and reconstruction in La1-xSrxTiO3/SrTiO3 heterostructures

Authors: Xueyan Wang, Lin Sun, Chen Ye, Zhen Huang, Kun Han, Ke Huang, Allen Jian Yang, Shengwei Zeng, Xian Jun Loh, Qiang Zhu, T. Venkatesan, Ariando Ariando, X. Renshaw Wang

Abstract: Electronic correlation and reconstruction are two important factors that play a critical role in shaping the magnetic and electronic properties of correlated low-dimensional systems. Here, we report a competition between the electronic correlation and structural reconstruction in La1-xSrxTiO3/SrTiO3 heterostructures by modulating material polarity and interfacial strain, respectively. The heterost… ▽ More Electronic correlation and reconstruction are two important factors that play a critical role in shaping the magnetic and electronic properties of correlated low-dimensional systems. Here, we report a competition between the electronic correlation and structural reconstruction in La1-xSrxTiO3/SrTiO3 heterostructures by modulating material polarity and interfacial strain, respectively. The heterostructures exhibit a critical thickness (tc) at which a metal-to-insulator transition (MIT) abruptly occurs at certain thickness, accompanied by the coexistence of two- and three-dimensional (2D and 3D) carriers. Intriguingly, the tc exhibits a V-shaped dependence on the doping concentration of Sr, with the smallest tc value at x = 0.5. We attribute this V-shaped dependence to the competition between the electronic reconstruction (modulated by the polarity) and the electronic correlation (modulated by strain), which are borne out by the experimental results, including strain-dependent electronic properties and the evolution of 2D and 3D carriers. Our findings underscore the significance of the interplay between electronic reconstruction and correlation in the realization and utilization of emergent electronic functionalities in low-dimensional correlated systems. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Designing superhard magnetic material in clathrate \b{eta}-C3N2 through atom embeddedness

Authors: Liping Sun, Botao Fu, Jing Chang

Abstract: Designing new compounds with the coexistence of diverse physical properties is of great significance for broad applications in multifunctional electronic devices. In this work, based on density functional theory, we predict the coexistence of mechanical superhardness and the controllable magnetism in the clathrate material \b{eta}-C3N2 through the implant of the external atom into the intrinsic ca… ▽ More Designing new compounds with the coexistence of diverse physical properties is of great significance for broad applications in multifunctional electronic devices. In this work, based on density functional theory, we predict the coexistence of mechanical superhardness and the controllable magnetism in the clathrate material \b{eta}-C3N2 through the implant of the external atom into the intrinsic cage structure. Taking hydrogen-doping (H@\b{eta}-C3N2) and fluorine-doping (F@\b{eta}-C3N2) as examples, our calculations indicate these two doped configurations are stable and discovered that they belong to antiferromagnetic semiconductor and ferromagnetic semi-metal, respectively. These intriguing magnetic phase transitions originate from their distinctive band structure around the Fermi level and can be well understood by the 3D Hubbard model with half-filling occupation and the Stoner model. Moreover, the high Vickers hardness of 49.0 GPa for H@\b{eta}-C3N2 and 48.2 GPa for F@\b{eta}-C3N2 are obtained, suggesting they are clathrate superhard materials as its host. Therefore, the incorporation of H and F in \b{eta}-C3N2 gives rise to a new type of superhard antiferromagnetic semiconductor and superhard ferromagnetic semimetal, respectively, which could have potential applications in harsh conditions. Our work provides an effective strategy to design a new class of highly desirable multifunctional materials with excellent mechanical properties and magnetic properties, which may arouse spintronic applications in superhard materials in the future. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 14 pages, 5 figures

Origins of limited non-basal plasticity in the μ-phase at room temperature

Authors: W. Luo, C. Gasper, S. Zhang, P. L. Sun, N. Ulumuddin, A. Petrova, Y. Lysogorskiy, R. Drautz, Z. Xie, S. Korte-Kerzel

Abstract: We unveil a new non-basal slip mechanism in the μ-phase at room temperature using nanomechanical testing, transmission electron microscopy and atomistic simulation. The (1-105) planar faults with a displacement vector of 0.07[-5502] can be formed by dislocation glide. They do not disrupt the Frank-Kasper packing and therefore enable the accommodation of plastic strain at low temperatures without r… ▽ More We unveil a new non-basal slip mechanism in the μ-phase at room temperature using nanomechanical testing, transmission electron microscopy and atomistic simulation. The (1-105) planar faults with a displacement vector of 0.07[-5502] can be formed by dislocation glide. They do not disrupt the Frank-Kasper packing and therefore enable the accommodation of plastic strain at low temperatures without requiring atomic diffusion. The intersections between the (1-105) planar faults and basal slip result in stress concentration and crack nucleation during loading. △ Less

Submitted 15 February, 2024; v1 submitted 17 August, 2023; originally announced August 2023.

Stability, mechanisms and kinetics of emergence of Au surface reconstructions using Bayesian force fields

Authors: Cameron J. Owen, Yu Xie, Anders Johansson, Lixin Sun, Boris Kozinsky

Abstract: Metal surfaces have long been known to reconstruct, significantly influencing their structural and catalytic properties. Many key mechanistic aspects of these subtle transformations remain poorly understood due to limitations of previous simulation approaches. Using active learning of Bayesian machine-learned force fields trained from ab initio calculations, we enable large-scale molecular dynamic… ▽ More Metal surfaces have long been known to reconstruct, significantly influencing their structural and catalytic properties. Many key mechanistic aspects of these subtle transformations remain poorly understood due to limitations of previous simulation approaches. Using active learning of Bayesian machine-learned force fields trained from ab initio calculations, we enable large-scale molecular dynamics simulations to describe the thermodynamics and time evolution of the low-index mesoscopic surface reconstructions of Au (e.g., the Au(111)-`Herringbone,' Au(110)-(1$\times$2)-`Missing-Row,' and Au(100)-`Quasi-Hexagonal' reconstructions). This capability yields direct atomistic understanding of the dynamic emergence of these surface states from their initial facets, providing previously inaccessible information such as nucleation kinetics and a complete mechanistic interpretation of reconstruction under the effects of strain and local deviations from the original stoichiometry. We successfully reproduce previous experimental observations of reconstructions on pristine surfaces and provide quantitative predictions of the emergence of spinodal decomposition and localized reconstruction in response to strain at non-ideal stoichiometries. A unified mechanistic explanation is presented of the kinetic and thermodynamic factors driving surface reconstruction. Furthermore, we study surface reconstructions on Au nanoparticles, where characteristic (111) and (100) reconstructions spontaneously appear on a variety of high-symmetry particle morphologies. △ Less

Submitted 14 August, 2023; originally announced August 2023.

Comments: Main: 17 pages, 7 figures, 1 table. SI: 9 pages, 15 figures, 1 table

Spintronic Quantum Phase Transition in a $Graphene/Pb_{0.24}Sn_{0.76}Te$ Heterostructure with Giant Rashba Spin-Orbit Coupling

Authors: Jennifer E. DeMell, Ivan Naumov, Gregory M. Stephen, Nicholas A. Blumenschein, Y. -J. Leo Sun, Adrian Fedorko, Jeremy T. Robinson, Paul M. Campbell, Patrick J. Taylor, Don Heiman, Pratibha Dev, Aubrey T. Hanbicki, Adam L. Friedman

Abstract: Mechanical stacking of two dissimilar materials often has surprising consequences for heterostructure behavior. In particular, a two-dimensional electron gas (2DEG) is formed in the heterostructure of the topological crystalline insulator Pb0.24Sn0.76Te and graphene due to contact of a polar with a nonpolar surface and the resulting changes in electronic structure needed to avoid polar catastrophe… ▽ More Mechanical stacking of two dissimilar materials often has surprising consequences for heterostructure behavior. In particular, a two-dimensional electron gas (2DEG) is formed in the heterostructure of the topological crystalline insulator Pb0.24Sn0.76Te and graphene due to contact of a polar with a nonpolar surface and the resulting changes in electronic structure needed to avoid polar catastrophe. We study the spintronic properties of this heterostructure with non-local spin valve devices. We observe spin-momentum locking at lower temperatures that transitions to regular spin channel transport only at ~40 K. Hanle spin precession measurements show a spin relaxation time as high as 2.18 ns. Density functional theory calculations confirm that the spin-momentum locking is due to a giant Rashba effect in the material and that the phase transition is a Lifshitz transition. The theoretically predicted Lifshitz transition is further evident in the phase transition-like behavior in the Landé g-factor and spin relaxation time. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Comments: 33 pages, 17 figures, supplemental information included

Journal ref: Adv. Funct. Mat., 2311875 (2023)

Robust magnetism against pressure in non-superconducting samples prepared from lutetium foil and H2/N2 gas mixture

Authors: Jing Guo, Shu Cai, Dong Wang, Haiyun Shu, Liuxiang Yang, Pengyu Wang, Wentao Wang, Huanfang Tian, Huaixin Yang, Yazhou Zhou, Jinyu Zhao, Jinyu Han, Jianqi Li Qi Wu, Yang Ding, Wenge Yang, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: Recently, the claim of "near-ambient superconductivity" in a N-doped lutetium hydride attracted enormous following-up investigations in the community of condensed matter physics and material sciences. But quite soon, the experimental results from different groups indicate consistently that no evidence of near-ambient superconductivity is found in the samples synthesized by the same method as the r… ▽ More Recently, the claim of "near-ambient superconductivity" in a N-doped lutetium hydride attracted enormous following-up investigations in the community of condensed matter physics and material sciences. But quite soon, the experimental results from different groups indicate consistently that no evidence of near-ambient superconductivity is found in the samples synthesized by the same method as the reported one, or by the other alternative methods. From our extended high-pressure heat capacity and magnetic susceptibility measurements on the samples prepared with the lutetium foil and H2/N2 gas mixture, we report the finding of a magnetic transition at the temperature about 56 K. Our results show that this magnetic phase is robust against pressure up to 4.3 GPa, which covers the critical pressure of boosting the claimed near room temperature superconductivity. △ Less

Submitted 11 June, 2023; v1 submitted 7 June, 2023; originally announced June 2023.

Comments: 14 pages, 4 figures

Journal ref: CPL 40 (2023)097401

Giant Enhancement of Magnonic Frequency Combs by Exceptional Points

Authors: Congyi Wang, Jinwei Rao, Zhijian Chen, Kaixin Zhao, Liaoxin Sun, Bimu Yao, Tao Yu, Yi-Pu Wang, Wei Lu

Abstract: With their incomparable time-frequency accuracy, frequency combs have significantly advanced precision spectroscopy, ultra-sensitive detection, and atomic clocks. Traditional methods to create photonic, phononic, and magnonic frequency combs hinge on material nonlinearities which are often weak, necessitating high power densities to surpass their initiation thresholds, which subsequently limits th… ▽ More With their incomparable time-frequency accuracy, frequency combs have significantly advanced precision spectroscopy, ultra-sensitive detection, and atomic clocks. Traditional methods to create photonic, phononic, and magnonic frequency combs hinge on material nonlinearities which are often weak, necessitating high power densities to surpass their initiation thresholds, which subsequently limits their applications. Here, we introduce a novel nonlinear process to efficiently generate magnonic frequency combs (MFCs) by exploiting exceptional points (EPs) in a coupled system comprising a pump-induced magnon mode and a Kittel mode. Even without any cavity, our method greatly improves the efficiency of nonlinear frequency conversion and achieves optimal MFCs at low pump power. Additionally, our novel nonlinear process enables excellent tunability of EPs using the polarization and power of the pump, simplifying MFC generation and manipulation. Our work establishes a synergistic relationship between non-Hermitian physics and MFCs, which is advantages for coherent/quantum information processing and ultra-sensitive detection. △ Less

Submitted 3 June, 2023; originally announced June 2023.

Comments: 7 pages, 4 figures

Superconducting-insulating phase transition in pressurized Ba1-xKxBiO3

Authors: Jinyu Han, Xiangde Zhu, Jianfeng Zhang, Shu Cai, Luhong Wang, Yang Gao, Fuyang Liu, Haozhe Liu, Saori I. Kawaguchi, Jing Guo, Yazhou Zhou, Jinyu Zhao, Pengyu Wang, Lixin Cao, Mingliang Tian, Qi Wu, Tao Xiang, Liling Sun

Abstract: We report the first observation of a pressure-induced transition from a superconducting (SC) to an insulating (I) phase in single-crystal Ba1-xKxBiO3 (x = 0.4, 0.43, 0.52, and 0.58) superconductors. X-ray diffraction measurements conducted at 20 K reveal a direct relationship between this SC-I transition and a pressure-induced distortion of crystal structure. With increasing pressure, the lattice… ▽ More We report the first observation of a pressure-induced transition from a superconducting (SC) to an insulating (I) phase in single-crystal Ba1-xKxBiO3 (x = 0.4, 0.43, 0.52, and 0.58) superconductors. X-ray diffraction measurements conducted at 20 K reveal a direct relationship between this SC-I transition and a pressure-induced distortion of crystal structure. With increasing pressure, the lattice parameters a and c of the ambient-pressure superconducting tetragonal (T) phase are compressed continuously below a critical pressure (Pc1), wherein the pressure (P) dependence of superconducting transition temperature (Tc) displays a small variation. However, upon further compression, the lattice of the compressed T phase displays an anisotropic change, and Tc shows a monotonous decrease. When the pressure reaches Pc2 (Pc2 > Pc1), the compressed T phase collapses along the c axis, followed by the disappearance of superconductivity and the appearance of the insulating phase. This SC-I transition is fully reversible, with the critical pressure increasing alongside K doping concentration. These findings are strikingly similar to the SC-I transition observed in hole-doped high-Tc cuprate superconductors under pressure. Identifying their commonalities could deepen our understanding of the mechanisms that underlie high- Tc superconductivity in these two oxide superconductors with a perovskite structure. △ Less

Submitted 4 February, 2025; v1 submitted 15 May, 2023; originally announced May 2023.

Comments: 18 pages and 5 figures

Journal ref: Phys. Rev. B 111,020509 (2025)

Truncated Non-Local Kinetic Energy Density Functionals for Simple Metals and Silicon

Authors: Liang Sun, Yuanbo Li, Mohan Chen

Abstract: Adopting an accurate kinetic energy density functional (KEDF) to characterize the noninteracting kinetic energy within the framework of orbital-free density functional theory (OFDFT) is challenging. We propose a new form of the non-local KEDF with a real-space truncation cutoff that satisfies the uniform electron gas limit and design KEDFs for simple metals and silicon. The new KEDFs are obtained… ▽ More Adopting an accurate kinetic energy density functional (KEDF) to characterize the noninteracting kinetic energy within the framework of orbital-free density functional theory (OFDFT) is challenging. We propose a new form of the non-local KEDF with a real-space truncation cutoff that satisfies the uniform electron gas limit and design KEDFs for simple metals and silicon. The new KEDFs are obtained by minimizing a residual function, which contains the differences in the total energy and charge density of several representative systems with respect to the Kohn-Sham DFT results. By systematically testing different cutoffs of the new KEDFs, we find that the cutoff plays a crucial role in determining the properties of metallic Al and semiconductor Si systems. We conclude that the new KEDF with a sufficiently long cutoff performs even better than some representative non-local KEDFs in some aspects, which sheds new light on optimizing the KEDFs in OFDFT to achieve better accuracy. △ Less

Submitted 3 August, 2023; v1 submitted 7 April, 2023; originally announced April 2023.

Comments: 14 Pages, 6 figures

No evidence of superconductivity in the compressed sample prepared from the lutetium foil and H2/N2 gas mixture

Authors: Shu Cai, Jing Guo, Haiyun Shu, Liuxiang Yang, Pengyu Wang, Yazhou Zhou, Jinyu Zhao, Jinyu Han, Qi Wu, Wenge Yang, Tao Xiang, Ho-kwang Mao, Liling Sun

Abstract: A material described as lutetium-hydrogen-nitrogen (Lu-H-N in short) was recently claimed to have near-ambient superconductivity[Gammon et al, Nature 615, 244, 2023]. If the results could be reproduced by other teams, it would be a major scientific breakthrough. Here, we report our results of transport and structure measurements on a material prepared using the same method as that reported by Gamm… ▽ More A material described as lutetium-hydrogen-nitrogen (Lu-H-N in short) was recently claimed to have near-ambient superconductivity[Gammon et al, Nature 615, 244, 2023]. If the results could be reproduced by other teams, it would be a major scientific breakthrough. Here, we report our results of transport and structure measurements on a material prepared using the same method as that reported by Gammon et al. Our X-ray diffraction measurements indicated that the obtained sample contained three substances: the FCC-1 phase (Fm-3m) with a lattice parameter a=5.03 Å, the FCC-2 phase (Fm-3m) with a lattice parameter a= 4.755 Å and Lu metal. These two FCC phases are identical to the those reported in the so-called near-ambient superconductor. However, we found that the samples had no evidence of superconductivity, through our resistance measurements in the temperature range of 300 - 4 K and pressure range of 0.9 - 3.4 GPa, and our magnetic susceptibility measurements in the pressure range of 0.8-3.3 GPa and temperature down to 100 K. We also used a laser heating technique to heat the sample to 1800°C and found no superconductivity in the produced dark blue samples below 6.5 GPa. In addition, the color of the both samples remain dark blue in the pressure range investigated. △ Less

Submitted 6 April, 2023; originally announced April 2023.

Comments: 13 pages and 4 figures

Journal ref: Matter and Radiation at Extremes 8 (2023) 048001

Molecular dynamics simulation of the transformation of Fe-Co alloy by machine learning force field based on atomic cluster expansion

Authors: Yongle Li, Feng Xu, Long Hou, Luchao Sun, Haijun Su, Xi Li, Wei Ren

Abstract: The force field describing the calculated interaction between atoms or molecules is the key to the accuracy of many molecular dynamics (MD) simulation results. Compared with traditional or semi-empirical force fields, machine learning force fields have the advantages of faster speed and higher precision. We have employed the method of atomic cluster expansion (ACE) combined with first-principles d… ▽ More The force field describing the calculated interaction between atoms or molecules is the key to the accuracy of many molecular dynamics (MD) simulation results. Compared with traditional or semi-empirical force fields, machine learning force fields have the advantages of faster speed and higher precision. We have employed the method of atomic cluster expansion (ACE) combined with first-principles density functional theory (DFT) calculations for machine learning, and successfully obtained the force field of the binary Fe-Co alloy. Molecular dynamics simulations of Fe-Co alloy carried out using this ACE force field predicted the correct phase transition range of Fe-Co alloy. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: 17 pages, 6 figures

Dilution induced magnetic localization in Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ single crystals

Authors: H. Liu, M. W. Huo, C. X. Huang, X. Huang, H. L. Sun, L. Chen, J. P. Xu, W. Yin, R. X. Li, M. Wang

Abstract: We report experimental studies on a series of Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ (0.02 $\leq x \leq $ 0.9) powder and single crystal samples using x-ray diffraction, neutron diffraction, magnetic susceptibility, and electronic transport measurements. All compositions are metallic and adopt the body-centered tetragonal structure with $I4/mmm$ space group. Anisotropic magnetic susceptibilities mea… ▽ More We report experimental studies on a series of Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ (0.02 $\leq x \leq $ 0.9) powder and single crystal samples using x-ray diffraction, neutron diffraction, magnetic susceptibility, and electronic transport measurements. All compositions are metallic and adopt the body-centered tetragonal structure with $I4/mmm$ space group. Anisotropic magnetic susceptibilities measured on single crystal samples suggest that Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$ undergo an evolution from ferromagnetism to antiferromagnetism, and finally to paramagnetism with increasing Ni concentration. Neutron diffraction measurements on the samples with $x$ = 0.1, 0.4, and 0.6 reveal an $A$-type antiferromagnetic order with moments lying in the $ab$ plane. The moment size changes from 0.69 ($x=0.1$) to 2.80$μ_B$ ($x=0.6$) per Co ions. Our results demonstrate that dilution of the magnetic Co ions by substitution of nonmagnetic Ni ions induces magnetic localization and evolution from itinerant to localized magnetism in Rb(Co$_{1-x}$Ni$_{x}$)$_{2}$Se$_{2}$. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Complexity of Many-Body Interactions in Transition Metals via Machine-Learned Force Fields from the TM23 Data Set

Authors: Cameron J. Owen, Steven B. Torrisi, Yu Xie, Simon Batzner, Kyle Bystrom, Jennifer Coulter, Albert Musaelian, Lixin Sun, Boris Kozinsky

Abstract: This work examines challenges associated with the accuracy of machine-learned force fields (MLFFs) for bulk solid and liquid phases of d-block elements. In exhaustive detail, we contrast the performance of force, energy, and stress predictions across the transition metals for two leading MLFF models: a kernel-based atomic cluster expansion method implemented using sparse Gaussian processes (FLARE)… ▽ More This work examines challenges associated with the accuracy of machine-learned force fields (MLFFs) for bulk solid and liquid phases of d-block elements. In exhaustive detail, we contrast the performance of force, energy, and stress predictions across the transition metals for two leading MLFF models: a kernel-based atomic cluster expansion method implemented using sparse Gaussian processes (FLARE), and an equivariant message-passing neural network (NequIP). Early transition metals present higher relative errors and are more difficult to learn relative to late platinum- and coinage-group elements, and this trend persists across model architectures. Trends in complexity of interatomic interactions for different metals are revealed via comparison of the performance of representations with different many-body order and angular resolution. Using arguments based on perturbation theory on the occupied and unoccupied d states near the Fermi level, we determine that the large, sharp d density of states both above and below the Fermi level in early transition metals leads to a more complex, harder-to-learn potential energy surface for these metals. Increasing the fictitious electronic temperature (smearing) modifies the angular sensitivity of forces and makes the early transition metal forces easier to learn. This work illustrates challenges in capturing intricate properties of metallic bonding with current leading MLFFs and provides a reference data set for transition metals, aimed at benchmarking the accuracy and improving the development of emerging machine-learned approximations. △ Less

Submitted 26 September, 2023; v1 submitted 25 February, 2023; originally announced February 2023.

Comments: main text: 21 pages, 9 figures, 2 tables. supplementary information: 57 pages, 83 figures, 20 tables

Hybrid single-pair charge-2 Weyl semimetals

Authors: P. Zhou, Y. Z. Hu, B. R. Pan, F. F. Huang, W. Q. Li, Z. S. Ma, L. Z. Sun

Abstract: Intuitively, the dispersion characteristics of Weyl nodes with opposite charges in single-pair charge-2 Weyl semimetals are the same, quadratic or linear. We theoretically predicted that single-pair hybrid charge-2 Weyl semimetals (the nodes with opposite charges show quadratic Weyl and linear charge-2 Dirac characteristics, respectively) can be protected by specific nonsymmorphic symmetries in sp… ▽ More Intuitively, the dispersion characteristics of Weyl nodes with opposite charges in single-pair charge-2 Weyl semimetals are the same, quadratic or linear. We theoretically predicted that single-pair hybrid charge-2 Weyl semimetals (the nodes with opposite charges show quadratic Weyl and linear charge-2 Dirac characteristics, respectively) can be protected by specific nonsymmorphic symmetries in spinless systems. Moreover, the symmetries force the pair of Weyl points locate at the center and corners of the first Brillouin zone (FBZ), respectively. Consequently, nontrivial surface states run through the entire FBZ of the system fascinating for future experimental detection and device applications. The hybrid phase is further verified with the help of first-principles calculations for the phonon states in realistic material of Na$_2$Zn$_2$O$_3$. The new phase will not only broaden the understanding of the Weyl semimetals, but also provide an interesting platform to investigate the interaction between the two types of Weyl fermions with different dispersions. △ Less

Submitted 19 January, 2023; v1 submitted 17 January, 2023; originally announced January 2023.

Comments: 19 pages, 5 figures

Pressure-induced coevolution of transport properties and lattice stability in CaK(Fe1-xNix)4As4 (x= 0.04 and 0) superconductors with and without spin-vortex crystal state

Authors: Pengyu Wang, Chang Liu, Run Yang, Shu Cai, Tao Xie, Jing Guo, Jinyu Zhao, Jinyu Han, Sijin Long, Yazhou Zhou, Yanchun Li, Xiaodong Li, Huiqian Luo, Shiliang Li, Qi Wu, Xianggang Qiu, Tao Xiang, Liling Sun

Abstract: Here we report the first investigation on correlation between the transport properties and the corresponding stability of the lattice structure for CaK(Fe1-xNix)4As4 (x=0.04 and 0), a new type of putative topological superconductors, with and without a spin-vortex crystal (SVC) state in a wide pressure range involving superconducting to non-superconducting transition and the half- to full-collapse… ▽ More Here we report the first investigation on correlation between the transport properties and the corresponding stability of the lattice structure for CaK(Fe1-xNix)4As4 (x=0.04 and 0), a new type of putative topological superconductors, with and without a spin-vortex crystal (SVC) state in a wide pressure range involving superconducting to non-superconducting transition and the half- to full-collapse of tetragonal (h-cT and f-cT) phases, by the complementary measurements of high-pressure resistance, Hall coefficient and synchrotron X-ray diffraction. We identify the three critical pressures, P1 that is the turn-on critical pressure of the h-cT phase transition and it coincides with the critical pressure for the sign change of Hall coefficient from positive to negative, a manifestation of the Fermi surface reconstruction, P2 that is the turn-off pressures of the h-cT phase transition, and P3 that is the critical pressure of the f-cT phase transition. By comparing the high-pressure results measured from the two kinds of samples, we find a distinct left-shift of the P1 for the doped sample, at the pressure of which its SVC state is fully suppressed, however the P2 and the P3 remain the same as that of the undoped one. Our results not only provide a consistent understanding on the results reported before, but also demonstrate the importance of the Fe-As bonding in stabilizing the superconductivity of the iron pnictide superconductors through the pressure window. △ Less

Submitted 12 January, 2023; originally announced January 2023.

Journal ref: Phys. Rev. B 108(2023)054415

Determining spin-orbit coupling in graphene by quasiparticle interference imaging

Authors: Lihuan Sun, Louk Rademaker, Diego Mauro, Alessandro Scarfato, Árpád Pásztor, Ignacio Gutiérrez-Lezama, Zhe Wang, Jose Martinez-Castro, Alberto F. Morpurgo, Christoph Renner

Abstract: Inducing and controlling spin-orbit coupling (SOC) in graphene is key to create topological states of matter, and for the realization of spintronic devices. Placing graphene onto a transition metal dichalcogenide is currently the most successful strategy to achieve this goal, but there is no consensus as to the nature and the magnitude of the induced SOC. Here, we show that the presence of backsca… ▽ More Inducing and controlling spin-orbit coupling (SOC) in graphene is key to create topological states of matter, and for the realization of spintronic devices. Placing graphene onto a transition metal dichalcogenide is currently the most successful strategy to achieve this goal, but there is no consensus as to the nature and the magnitude of the induced SOC. Here, we show that the presence of backscattering in graphene-on-WSe$_2$ heterostructures can be used to probe SOC and to determine its strength quantitatively, by imaging quasiparticle interference with a scanning tunneling microscope. A detailed theoretical analysis of the Fourier transform of quasiparticle interference images reveals that the induced SOC consists of a valley-Zeeman ($λ_{\text{vZ}}\approx 2$ meV) and a Rashba ($λ_\text{R}\approx 15$ meV) term, one order of magnitude larger than what theory predicts, but in excellent agreement with earlier transport experiments. The validity of our analysis is confirmed by measurements on a 30 degree twist angle heterostructure that exhibits no backscattering, as expected from symmetry considerations. Our results demonstrate a viable strategy to determine SOC quantitatively by imaging quasiparticle interference. △ Less

Submitted 9 December, 2022; originally announced December 2022.