Showing 1–50 of 119 results for author: Sun, B

High pressure synthesis and structural study of AuGa2 intermetallic compound

Authors: Azkar Saeed Ahmad, Zhuoyang Yu, Sizhe Wang, Tong Weng, Wenting Lu, Baihong Sun, Jiewu Song, Qian Zhang, Martin Kunz, Bihan Wang, Elissaios Stavrou

Abstract: We report the synthesis of the AuGa2 intermetallic compound, using a direct reaction of the relevant elements at room temperature and at very low pressure. The pressure needed to synthesize the AuGa2 compound is below 1 GPa, that is at the lower limit of modern large volume presses, routinely used to synthesize other commercially available materials. This study presents a new method of synthesizin… ▽ More We report the synthesis of the AuGa2 intermetallic compound, using a direct reaction of the relevant elements at room temperature and at very low pressure. The pressure needed to synthesize the AuGa2 compound is below 1 GPa, that is at the lower limit of modern large volume presses, routinely used to synthesize other commercially available materials. This study presents a new method of synthesizing AuGa2, which is much more cost efficient and environmentally friendly than the previously used high-temperature synthesis techniques, and will open new possibilities of synthesizing other intermetallic compounds using high-pressure athermal techniques. △ Less

Submitted 1 July, 2025; originally announced July 2025.

Comments: 8 pages, 3 figures

On the ambient conditions crystal structure of AgSbTe2

Authors: Baihong Sun, Sergei Grazhdannikov, Muhamed Dawod, Lunhua He, Jiazheng Hao, Thomas Meier, Yansun Yao, Yaron Amouyal, Elissaios Stavrou

Abstract: We present a combined X-ray and neutron diffraction, Raman spectroscopy, and 121Sb NMR studies of AgSbTe2, supported by first-principles calculations aiming to elucidate its crystal structure. While diffraction methods cannot unambiguously resolve the structure, Raman and NMR data, together with electric field gradient calculations, strongly support the rhombohedral R-3m phase. Moreover, the agree… ▽ More We present a combined X-ray and neutron diffraction, Raman spectroscopy, and 121Sb NMR studies of AgSbTe2, supported by first-principles calculations aiming to elucidate its crystal structure. While diffraction methods cannot unambiguously resolve the structure, Raman and NMR data, together with electric field gradient calculations, strongly support the rhombohedral R-3m phase. Moreover, the agreement between experimental and calculated Raman spectra further corroborates this result, resolving the 60-year sold debate about the exact crystal structure of the AgSbTe2 compound. △ Less

Submitted 16 June, 2025; originally announced June 2025.

Effective reduction in thermal conductivity by high-density dislocations in SrTiO3

Authors: Jinxue Ding, Jiawen Zhang, Jinfeng Dong, Kimitaka Higuchi, Atsutomo Nakamura, Wenjun Lu, Bo Sun, Xufei Fang

Abstract: Decreasing thermal conductivity is important for designing efficient thermoelectric devices. Traditional engineering strategies have focused on point defects and interface design. Recently, dislocations as line defects have emerged as a new tool for regulating thermal conductivity. In ceramics-based thermoelectric materials, the key challenge lies in achieving sufficiently high-density dislocation… ▽ More Decreasing thermal conductivity is important for designing efficient thermoelectric devices. Traditional engineering strategies have focused on point defects and interface design. Recently, dislocations as line defects have emerged as a new tool for regulating thermal conductivity. In ceramics-based thermoelectric materials, the key challenge lies in achieving sufficiently high-density dislocations to effectively scatter phonons, as the typical dislocation density in ceramics after bulk deformation is constrained to 10 to the power of 12 per square meter. In this work, we adopted the mechanical imprinting method and achieved a dislocation density of 10 to the power of 15 per square meter in single-crystal SrTiO3, which is known for its room-temperature plasticity and acts as a promising material for thermoelectric applications. Using the time-domain thermoreflectance (TDTR) method, we measured about a 50% reduction in thermal conductivity over a broad temperature range (80 to 400 K) with the engineered high-density dislocations. These results suggest that tuning dislocations could offer a new path to minimizing thermal conductivity for engineering thermoelectric materials. △ Less

Submitted 30 June, 2025; v1 submitted 25 March, 2025; originally announced March 2025.

Journal ref: Applied Physics Letters, 2025

Real-time simulation enabled navigation control of magnetic soft continuum robots in confined lumens

Authors: Dezhong Tong, Zhuonan Hao, Jiyu Li, Boxi Sun, Mingchao Liu, Liu Wang, Weicheng Huang

Abstract: Magnetic soft continuum robots (MSCRs) have emerged as a promising technology for minimally invasive interventions, offering enhanced dexterity and remote-controlled navigation in confined lumens. Unlike conventional guidewires with pre-shaped tips, MSCRs feature a magnetic tip that actively bends under applied magnetic fields. Despite extensive studies in modeling and simulation, achieving real-t… ▽ More Magnetic soft continuum robots (MSCRs) have emerged as a promising technology for minimally invasive interventions, offering enhanced dexterity and remote-controlled navigation in confined lumens. Unlike conventional guidewires with pre-shaped tips, MSCRs feature a magnetic tip that actively bends under applied magnetic fields. Despite extensive studies in modeling and simulation, achieving real-time navigation control of MSCRs in confined lumens remains a significant challenge. The primary reasons are due to robot-lumen contact interactions and computational limitations in modeling MSCR nonlinear behavior under magnetic actuation. Existing approaches, such as Finite Element Method (FEM) simulations and energy-minimization techniques, suffer from high computational costs and oversimplified contact interactions, making them impractical for real-world applications. In this work, we develop a real-time simulation and navigation control framework that integrates hard-magnetic elastic rod theory, formulated within the Discrete Differential Geometry (DDG) framework, with an order-reduced contact handling strategy. Our approach captures large deformations and complex interactions while maintaining computational efficiency. Next, the navigation control problem is formulated as an inverse design task, where optimal magnetic fields are computed in real time by minimizing the constrained forces and enhancing navigation accuracy. We validate the proposed framework through comprehensive numerical simulations and experimental studies, demonstrating its robustness, efficiency, and accuracy. The results show that our method significantly reduces computational costs while maintaining high-fidelity modeling, making it feasible for real-time deployment in clinical settings. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Comments: 22 pages, 12 figures

Comparative high-pressure structural and electrical transport properties study of thermoelectric (Bi1-xSbx)2Te3 compounds

Authors: Chenxin Wei, Dawod Muhamed, Wenting Lu, Haikai Zou, Baihong Sun, Shiyu Feng, Qian Zhang, Zegeng Su, Hirokazu Kadobayashi, Martin Kunz, Bihang Wang, Azkar Saeed Ahmad, Yaron Amouyal, Elissaios Stavrou

Abstract: Thermoelectric (Bi1-x Sbx)2Te3 (BST-x) compounds with x=0.2, 0.7 and 0.9 have been studied using synchrotron angle-dispersive powder x-ray diffraction in a diamond anvil cell up to 25 GPa (at room temperature). The results clearly indicate that all compounds of this study follow a similar structural evolution with the one of pure Bi2Te3 and Sb2Te3 under pressure. From the comparison between the cr… ▽ More Thermoelectric (Bi1-x Sbx)2Te3 (BST-x) compounds with x=0.2, 0.7 and 0.9 have been studied using synchrotron angle-dispersive powder x-ray diffraction in a diamond anvil cell up to 25 GPa (at room temperature). The results clearly indicate that all compounds of this study follow a similar structural evolution with the one of pure Bi2Te3 and Sb2Te3 under pressure. From the comparison between the critical pressures of the corresponding phase transitions, a clear trend of increasing critical pressure for the transition to the disordered solid-solution BCC phase was observed with the increase of Sb concentration. In the case of the BST-0.7, an extended stability of the solid-solution BCC phase up to, at least, 180 GPa was observed. Finally, electrical transport properties measurements under pressure for BST-0.7, document a reversible pressure-induced metallization above 12 GPa. △ Less

Submitted 9 March, 2025; originally announced March 2025.

Comments: 17 pages, 6 figures

The chemisorption thermodynamics of O$_2$ and H$_2$O on AFM UO$_2$ surfaces unraveled by DFT+U-D3 study

Authors: Yang Huang, Le Zhang, Hefei Ji, Zhipeng Zhang, Qili Zhang, Bo Sun, Haifeng Liu, Haifeng Song

Abstract: Unraveling the adsorption mechanism and thermodynamics of O$_2$ and H$_2$O on uranium dioxide surfaces is critical for the nuclear fuel storage and uranium corrosion. Based on the first-principles DFT+U-D3 calculations, we carefully test the effect of antiferromagnetic order arrangements on the thermodynamic stability of UO$_2$ surfaces and propose the 1k AFM surface computational model. The chemi… ▽ More Unraveling the adsorption mechanism and thermodynamics of O$_2$ and H$_2$O on uranium dioxide surfaces is critical for the nuclear fuel storage and uranium corrosion. Based on the first-principles DFT+U-D3 calculations, we carefully test the effect of antiferromagnetic order arrangements on the thermodynamic stability of UO$_2$ surfaces and propose the 1k AFM surface computational model. The chemisorption states of O$_2$ and H$_2$O on UO$_2$ (111) surface, suggested by previous experiments, are accurately calculated for the first time. The adsorption properties of O$_2$ and H$_2$O on UO$_2$(111) and (110) surfaces are discussed in detail to reveal the different interaction mechanisms. Combined with ab initio atomistic thermodynamics method, we systematically calculate the chemisorption phase diagram and isotherm of O$_2$ and H$_2$O on UO$_2$ surfaces. Due to the different intermolecular interactions, the monolayer and multilayer adsorption models are identified for O$_2$ and H$_2$O, respectively. This study has comprehensively revealed the different adsorption mechanisms of O$_2$ and H$_2$O on UO$_2$ surfaces, bridging the electronic structure calculations to the interpretation of experimental results and providing a solid foundation for future theoretical studies of uranium corrosion mechanism in humid air. △ Less

Submitted 11 February, 2025; originally announced February 2025.

High pressure structural and lattice dynamics study of α-In$_2$Se$_3$

Authors: Shiyu Feng, Baihong Sun, Wenting Lu, Haikai Zou, Chenxin Wei, Qian Zhang, Bihan Wang, Martin Kunz, Hirokazu Kadobayashi, Azkar Saeed Ahmad, Elad Koren, Elissaios Stavrou

Abstract: Layered $α$-In$_2$Se$_3$has been studied using a concomitant in-situ synchrotron angle dispersive powder x-ray diffraction and Raman spectroscopy study in a diamond anvil cell up to 60+ GPa, at room temperature. Helium, that remains fairly hydrostatic up to the highest pressure in this study, was used as the pressure-transmitting medium. The results from both experimental methods reveal a pressure… ▽ More Layered $α$-In$_2$Se$_3$has been studied using a concomitant in-situ synchrotron angle dispersive powder x-ray diffraction and Raman spectroscopy study in a diamond anvil cell up to 60+ GPa, at room temperature. Helium, that remains fairly hydrostatic up to the highest pressure in this study, was used as the pressure-transmitting medium. The results from both experimental methods reveal a pressure-induced structural phase transition from $α$-In$_2$Se$_3$ to a monoclinic $β$'-In2Se3 structure at $\approx$1 GPa, in agreement with previous studies. Based on our detailed measurements using both experimental techniques and F-f formalism, the $β$'-In$_2$Se$_3$ structure remains stable up to 45 GPa, without a clear indication of a phase transition towards the previously reported $β$-In2Se3 phase. Above this pressure, In$_2$Se$_3$ adopts a disordered solid-solution-like orthorhombic structure, phase IV. The results are discussed in comparison with the relevant previous studies of $α$-In$_2$Se$_3$ under pressure. △ Less

Submitted 9 February, 2025; originally announced February 2025.

Comments: 16 Pages, 6 figures

Boundary conditions dictate frequency dependence of thermal conductivity in silicon

Authors: Yizhe Liu, Qinshu Li, Fang Liu, Xinqiang Wang, Bo Sun

Abstract: Non-Fourier thermal transports have drawn significant attention for decades. Among them, the frequency dependent thermal conductivity has been extensively explored by pump-probe techniques, such as time-domain thermoreflectance, which is employed to probe the spectra of phonon mean free paths. However, previous studies on silicon have not exhibited apparent frequency dependence despite its broad p… ▽ More Non-Fourier thermal transports have drawn significant attention for decades. Among them, the frequency dependent thermal conductivity has been extensively explored by pump-probe techniques, such as time-domain thermoreflectance, which is employed to probe the spectra of phonon mean free paths. However, previous studies on silicon have not exhibited apparent frequency dependence despite its broad phonon distribution. Here, we report the frequency dependent thermal transport in Al/Si with an atomically sharp interface, where the matched Debye temperatures preserve non-equilibrium between low- and high-energy phonons in Si. The dependence vanishes in Al/SiO$_2$/Si at room temperature, since the SiO$_2$ interlayer facilitates phonon scattering and destroys thermal non-equilibrium. At 80 K, frequency dependence reemerges in Al/SiO$_2$/Si, due to reduced interfacial phonon scattering. Our findings highlight the significance of boundary conditions in frequency dependent thermal conductivity. △ Less

Submitted 3 December, 2024; originally announced December 2024.

3D Printing of Near-Ambient Responsive Liquid Crystal Elastomers with Enhanced Nematic Order and Pluralized Transformation

Authors: Dongxiao Li, Yuxuan Sun, Xingjian Li, Xingxiang Li, Zhengqing Zhu, Boxi Sun, Shutong Nong, Jiyang Wu, Tingrui Pan, Weihua Li, Shiwu Zhang, Mujun Li

Abstract: Liquid Crystal Elastomers with near-ambient temperature-responsiveness (NAT-LCEs) have been extensively studied for building bio-compatible, low-power consumption devices and robotics. However, conventional manufacturing methods face limitations in programmability (e.g., molding) or low nematic order (e.g., DIW printing). Here, a hybrid cooling strategy is proposed for programmable 3D printing of… ▽ More Liquid Crystal Elastomers with near-ambient temperature-responsiveness (NAT-LCEs) have been extensively studied for building bio-compatible, low-power consumption devices and robotics. However, conventional manufacturing methods face limitations in programmability (e.g., molding) or low nematic order (e.g., DIW printing). Here, a hybrid cooling strategy is proposed for programmable 3D printing of NAT-LCEs with enhanced nematic order, intricate shape forming, and morphing capability. By integrating a low-temperature nozzle and a cooling platform into a 3D printer, the resulting temperature field synergistically facilitates mesogen alignment during extrusion and disruption-free UV cross-linking. This method achieves a nematic order 3000% higher than NAT-LCEs fabricated using traditional room temperature 3D printing. Enabled by shifting of transition temperature during hybrid cooling printing, printed sheets spontaneously turn into 3D structures after release from the platform, exhibiting bidirectional deformation with heating and cooling. By adjusting the nozzle and plate temperatures, NAT-LCEs with graded properties can be fabricated for intricate shape morphing. A wristband system with enhanced heart rate monitoring is also developed based on 3D-printed NAT-LCE. Our method may open new possibilities for soft robotics, biomedical devices, and wearable electronics. △ Less

Submitted 9 January, 2025; v1 submitted 11 November, 2024; originally announced November 2024.

Microstructural features and hydrogen diffusion in bcc FeCr alloys: a comparison between the Kelvin probe- and nanohardness based- methods

Authors: Jing Rao, Binhan Sun, Arulkumar Ganapathi, Xizhen Dong, Anton Hohenwarter, Chun-Hung Wu, Michael Rohwerder, Gerhard Dehm, Maria Jazmin Duarte

Abstract: Hydrogen embrittlement can result in a sudden failure in metallic materials, which is particularly harmful in industrially relevant alloys, such as steels. A more comprehensive understanding of hydrogen interactions with microstructural features is critical for preventing hydrogen-induced damage and promoting a hydrogen-based environment-benign economy. We use the Kelvin probe-based potentiometric… ▽ More Hydrogen embrittlement can result in a sudden failure in metallic materials, which is particularly harmful in industrially relevant alloys, such as steels. A more comprehensive understanding of hydrogen interactions with microstructural features is critical for preventing hydrogen-induced damage and promoting a hydrogen-based environment-benign economy. We use the Kelvin probe-based potentiometric hydrogen electrode method and thermal desorption spectroscopy to investigate hydrogen interactions with different hydrogen traps in ferritic FeCr alloys with different chromium contents, dislocation densities, and grain sizes. In addition, we confirm the validity of a novel nanohardness-based diffusion coefficient approach by performing in situ nanoindentation testing. Simultaneous acquisition of the dynamic time-resolved mechanical response of FeCr alloys to hydrogen and the hydrogen diffusivities in these alloys is possible during continuous hydrogen supply. Dislocations, grain boundaries and Cr atoms induce reversible hydrogen trapping sites in these ferritic alloys, leading to the reduction of the hydrogen diffusion coefficients and the increase of the absorbed hydrogen. △ Less

Submitted 4 September, 2024; originally announced September 2024.

Comments: 39 pages, 11 figures

Segregation at prior austenite grain boundaries: the competition between boron and hydrogen

Authors: Guillaume Hachet, Ali Tehranchi, Hao Shi, Manoj Prabhakar, Shaolou Wei, Katja Angenendt, Stefan Zaefferer, Baptiste Gault, Binhan Sun, Dirk Ponge, Dierk Raabe

Abstract: The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron and hydrogen are attracted to grain boundaries but boron can repel hydrogen. This behavior has also been observed using TDS measur… ▽ More The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The calculations show that boron and hydrogen are attracted to grain boundaries but boron can repel hydrogen. This behavior has also been observed using TDS measurements, with the disappearance of one peak when boron is incorporated into the microstructure. Additionally, the microstructure of both steels has been studied through electron backscattered diffraction, electron channeling contrast imaging, synchrotron X-ray measurements, and atom probe tomography. While they have a similar grain size, grain boundary distribution, and dislocation densities, a pronounced boron segregation into PAGBs is observed for boron-doped steels. Then, the equilibrium hydrogen concentration in different trapping sites has been evaluated using the Langmuir-McLean approximation. This thermodynamic model shows that the distribution of hydrogen is identical for all traps when the total hydrogen concentration is low for boron-free steel. However, when it increases, traps of the lowest segregation energies (mostly PAGBs) are firstly saturated, which promotes failure initiation at this defect type. This finding partially explains why PAGBs are the weakest microstructure feature when martensitic steels are exposed to hydrogen-containing environments. △ Less

Submitted 22 November, 2024; v1 submitted 4 July, 2024; originally announced July 2024.

Comments: Pre-printed version

Journal ref: International Journal of Hydrogen Energy 95 (2024), 734-746

Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry

Authors: M. A. Tunes, D. Parkison, B. Sun, P. Willenshofer, S. Samberger, B. K. Derby, J. K. S. Baldwin, S. J. Fensin, D. Sobieraj, J. S. Wróbel, J. Byggmästar, S. Pogatscher, E. Martinez, D. Nguyen-Manh, O. El-Atwani

Abstract: Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii)… ▽ More Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Anomalously Strong Size Effect on Thermal Conductivity of Diamond Microparticles

Authors: Yufeng Wang, Bo Sun

Abstract: Diamond has the known highest thermal conductivity of around \SI{2000}{\watt\per\meter\per\kelvin} and is therefore widely used for heat dissipation. In practical applications, synthetic diamond microparticles are usually assumed to have similar thermal conductivity to that of bulk diamond because the particle size is larger than theoretical phonon mean free path so that boundary scattering of hea… ▽ More Diamond has the known highest thermal conductivity of around \SI{2000}{\watt\per\meter\per\kelvin} and is therefore widely used for heat dissipation. In practical applications, synthetic diamond microparticles are usually assumed to have similar thermal conductivity to that of bulk diamond because the particle size is larger than theoretical phonon mean free path so that boundary scattering of heat-carrying phonons is absent. In this report, we find the thermal conductivity of diamond microparticles anomalously depends on their sizes. Thermal conductivity of diamond microparticles increases from \SI{400}{\watt\per\meter\per\kelvin} to \SI{2000}{\watt\per\meter\per\kelvin} with the size growing from \SI{20}{\micro\meter} to \SI{300}{\micro\meter}. We attribute the abnormally strong size effect to the long-range defects during the growth process based on analysis of point defects, dislocations, and thermal penetration depth dependence of thermal conductivity. Our results play a vital role in the design of diamond composites and in the improvement of thermal conductivity of synthetic diamonds. △ Less

Submitted 30 May, 2024; originally announced May 2024.

Oxygen vacancies modulated VO2 for neurons and Spiking Neural Network construction

Authors: Liang Li, Ting Zhou, Tong Liu, Zhiwei Liu, Yaping Li, Shuo Wu, Shanguang Zhao, Jinglin Zhu, Meiling Liu, Zhihan Lin, Bowen Sun, Jianjun Li, Fangwen Sun, Chongwen Zou

Abstract: Artificial neuronal devices are the basic building blocks for neuromorphic computing systems, which have been motivated by realistic brain emulation. Aiming for these applications, various device concepts have been proposed to mimic the neuronal dynamics and functions. While till now, the artificial neuron devices with high efficiency, high stability and low power consumption are still far from pr… ▽ More Artificial neuronal devices are the basic building blocks for neuromorphic computing systems, which have been motivated by realistic brain emulation. Aiming for these applications, various device concepts have been proposed to mimic the neuronal dynamics and functions. While till now, the artificial neuron devices with high efficiency, high stability and low power consumption are still far from practical application. Due to the special insulator-metal phase transition, Vanadium Dioxide (VO2) has been considered as an idea candidate for neuronal device fabrication. However, its intrinsic insulating state requires the VO2 neuronal device to be driven under large bias voltage, resulting in high power consumption and low frequency. Thus in the current study, we have addressed this challenge by preparing oxygen vacancies modulated VO2 film(VO2-x) and fabricating the VO2-x neuronal devices for Spiking Neural Networks (SNNs) construction. Results indicate the neuron devices can be operated under lower voltage with improved processing speed. The proposed VO2-x based back-propagation SNNs (BP-SNNs) system, trained with the MNIST dataset, demonstrates excellent accuracy in image recognition. Our study not only demonstrates the VO2-x based neurons and SNN system for practical application, but also offers an effective way to optimize the future neuromorphic computing systems by defect engineering strategy. △ Less

Submitted 16 April, 2024; originally announced May 2024.

Comments: 18 pages,4 figures

On the critical competition between singlet exciton decay and free charge generation in non-fullerene-based organic solar cells with low energetic offsets

Authors: M. Pranav, A. Shukla, D. Moser, J. Rumeney, W. Liu, R. Wang, B. Sun, S. Smeets, N. Tokmoldin, F. Jaiser, T. Hultzsch, S. Shoaee, W. Maes, L. Lüer, C. Brabec, K. Vandewal, D. Andrienko, S. Ludwigs, D. Neher

Abstract: In this era of non-fullerene acceptor (NFA) based organic solar cells, reducing voltage losses while maintaining high photocurrents is the holy grail of current research. Recent focus lies in understanding the manifold fundamental mechanisms in organic blends with minimal energy offsets - particularly the relationship between ionization energy offset (ΔIE) and free charge generation. We quantitati… ▽ More In this era of non-fullerene acceptor (NFA) based organic solar cells, reducing voltage losses while maintaining high photocurrents is the holy grail of current research. Recent focus lies in understanding the manifold fundamental mechanisms in organic blends with minimal energy offsets - particularly the relationship between ionization energy offset (ΔIE) and free charge generation. We quantitatively probe this relationship in multiple NFA-based blends by mixing Y5 and Y6 NFAs with PM6 of varying molecular weights, covering a 15% to 1% power conversion efficiency (PCE) range and a progression of ΔIE. Spectroelectrochemistry reveals a critical ΔIE of approximately 0.3 eV, below which the PCE sharply declines. Transient absorption spectroscopy consistently reveals that a smaller ΔIE slows the dissociation of the NFA's local singlet exciton (LE) into free charges, albeit restorable by an electric field. Bias-dependent time delayed collection experiments quantify the free charge generation efficiency, while photoluminescence quantum efficiency measurements assess photocurrent loss from LE decay. Combined with transient photoluminescence experiments, we find that the decay of singlet excitons is the primary competition to free charge generation in low-offset NFA-based organic solar cells, with neither noticeable losses from charge-transfer (CT) decay nor evidence for LE-CT hybridization. Our experimental data align with Marcus theory calculations, supported by density functional theory simulations, for zero-field free charge generation and exciton decay efficiencies. We find that efficient photocurrent generation generally requires that the CT state is located below the LE, but that this restriction is lifted in systems with a small reorganization energy for charge transfer. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Discovering High-Strength Alloys via Physics-Transfer Learning

Authors: Yingjie Zhao, Hongbo Zhou, Zian Zhang, Zhenxing Bo, Baoan Sun, Minqiang Jiang, Zhiping Xu

Abstract: Predicting the strength of materials requires considering various length and time scales, striking a balance between accuracy and efficiency. Peierls stress measures material strength by evaluating dislocation resistance to plastic flow, reliant on elastic lattice responses and crystal slip energy landscape. Computational challenges due to the non-local and non-equilibrium nature of dislocations p… ▽ More Predicting the strength of materials requires considering various length and time scales, striking a balance between accuracy and efficiency. Peierls stress measures material strength by evaluating dislocation resistance to plastic flow, reliant on elastic lattice responses and crystal slip energy landscape. Computational challenges due to the non-local and non-equilibrium nature of dislocations prohibit Peierls stress evaluation from state-of-the-art material databases. We propose a data-driven framework that leverages neural networks trained on force field simulations to understand crystal plasticity physics, predicting Peierls stress from material parameters derived via density functional theory computations, which are otherwise computationally intensive for direct dislocation modeling. This physics transfer approach successfully screen the strength of metallic alloys from a limited number of single-point calculations with chemical accuracy. Guided by these predictions, we fabricate high-strength binary alloys previously unexplored, utilizing high-throughput ion beam deposition techniques. The framework extends to problems facing the accuracy-performance dilemma in general by harnessing the hierarchy of physics of multiscale models in materials sciences. △ Less

Submitted 26 January, 2025; v1 submitted 12 March, 2024; originally announced March 2024.

Giant third-order nonlinear Hall effect in misfit layer compound (SnS)${1.17}$(NbS$_2$)$_3$

Authors: Shengyao Li, Xueyan Wang, Zherui Yang, Lijuan Zhang, Siew Lang Teo, Ming Lin, Ri He, Naizhou Wang, Peng Song, Wanghao Tian, Xian Jun Loh, Qiang Zhu, Bo Sun, X. Renshaw Wang

Abstract: Nonlinear Hall effect (NLHE) holds immense significance in recognizing the band geometry and its potential applications in current rectification. Recent discoveries have expanded the study from second-order to third-order nonlinear Hall effect (THE), which is governed by an intrinsic band geometric quantity called the Berry Connection Polarizability (BCP) tensor. Here we demonstrate a giant THE in… ▽ More Nonlinear Hall effect (NLHE) holds immense significance in recognizing the band geometry and its potential applications in current rectification. Recent discoveries have expanded the study from second-order to third-order nonlinear Hall effect (THE), which is governed by an intrinsic band geometric quantity called the Berry Connection Polarizability (BCP) tensor. Here we demonstrate a giant THE in a misfit layer compound, (SnS)${1.17}$(NbS$_2$)$_3$. While the THE is prohibited in individual NbS$_2$ and SnS due to the constraints imposed by the crystal symmetry and their band structures, a remarkable THE emerges when a superlattice is formed by introducing a monolayer of SnS. The angular-dependent THE and its scaling relationship indicate that the phenomenon could be correlated to the band geometry modulation, concurrently with the symmetry breaking. The resulting strength of THE is orders of magnitude higher compared to recent studies. Our work illuminates the modulation of structural and electronic geometries for novel quantum phenomena through interface engineering. △ Less

Submitted 31 January, 2024; originally announced January 2024.

Phase-field simulations of the effect of temperature and interface for zirconium $δ\mbox{-}$hydrides

Authors: Zi-Hang Chen, Jie Sheng, Yu Liu, Xiao-Ming Shi, Houbing Huang, Ke Xu, Yue-Chao Wang, Shuai Wu, Bo Sun, Hai-Feng Liu, Hai-Feng Song

Abstract: Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides. In this study, we have developed a phase field model based on the assumption of elastic behaviour within a specific temperature range (613-653K). This model allows us to study the influence of temperatu… ▽ More Hydride precipitation in zirconium cladding materials can damage their integrity and durability.Service temperature and material defects have a significant effect on the dynamic growth of hydrides. In this study, we have developed a phase field model based on the assumption of elastic behaviour within a specific temperature range (613-653K). This model allows us to study the influence of temperature and interfacial effects on the morphology, stress, and average growth rate of zirconium hydride. The results suggest that changes in temperature and interfacial energy influence the aspect ratio and average growth rate of the hydride morphology. The ultimate determinant of hydride orientation is the loss of interfacial coherence, primarily induced by interfacial dislocation defects and quantifiable by the mismatch degree $q$. An escalation in interfacial coherence loss leads to a transition of hydride growth from horizontal to vertical, accompanied by the onset of redirection behaviour. Interestingly, redirection occurs at a critical mismatch level, denoted $q_c$, and remains unaffected by variations in temperature and interfacial energy. However, this redirection leads to an increase in the maximum stress, which may influence the direction of hydride crack propagation. This research highlights the importance of interfacial coherence and provides valuable insights into the morphology and growth kinetics of hydrides in zirconium alloys. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 13 pages (text), 8 figures (text), 1 table (text), 6 pages (SI), 2 figures (SI)

Journal ref: Chin. Phys. B, 2024, 33(4): 048201

Optimizing site-specific specimen preparation for Atom Probe Tomography by using hydrogen for visualizing radiation-induced damage

Authors: Aparna Saksena, Binhan Sun, Xizhen Dong, Heena Khanchandani, Dirk Ponge, Baptiste Gault

Abstract: Atom probe tomography (APT) is extensively used to measure the local chemistry of materials. Site-specific preparation via a focused ion beam (FIB) is routinely implemented to fabricate needle-shaped specimens with an end radius in the range of 50 nm. This preparation route is sometimes supplemented by transmission Kikuchi diffraction (TKD) to facilitate the positioning of a region of interest suf… ▽ More Atom probe tomography (APT) is extensively used to measure the local chemistry of materials. Site-specific preparation via a focused ion beam (FIB) is routinely implemented to fabricate needle-shaped specimens with an end radius in the range of 50 nm. This preparation route is sometimes supplemented by transmission Kikuchi diffraction (TKD) to facilitate the positioning of a region of interest sufficiently close to the apex. Irradiating the specimen with energetic electrons and ions can lead to the generation of vacancies and even amorphization of the specimen. These extrinsically created vacancies become crucial for probing the hydrogen or deuterium distribution since they act as a strong trap. Here, we investigated the feasibility of site-specific preparation of a two-phase medium-Mn steel containing austenite (fcc) and ferrite (bcc). Following gaseous charging of APT specimens in deuterium (D2), clusters enriched by up to 35 at.% D, are imaged after Pt deposition, conventional Ga-FIB preparation, and TKD conducted separately. These D-rich clusters are assumed to arise from the agglomeration of vacancies acting as strong traps. By systematically eliminating these preparation-induced damages, we finally introduce a workflow allowing for studying intrinsic traps for H/D inherent to the material. △ Less

Submitted 13 October, 2023; originally announced October 2023.

Chemical heterogeneity enhances hydrogen resistance in high-strength steels

Authors: Binhan Sun, Wenjun Lu, Ran Ding, Surendra Kumar Makineni, Baptiste Gault, Chun-Hung Wu, Di Wan, Hao Chen, Dirk Ponge, Dierk Raabe

Abstract: When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrit… ▽ More When H, the lightest, smallest and most abundant atom in the universe, makes its way into a high-strength alloy (>650 MPa), the material's load-bearing capacity is abruptly lost. This phenomenon, known as H embrittlement, was responsible for the catastrophic and unpredictable failure of large engineering structures in service. The inherent antagonism between high strength requirements and H embrittlement susceptibility strongly hinders the design of lightweight yet reliable structural components needed for carbon-free hydrogen-propelled industries and reduced-emission transportation solutions. Inexpensive and scalable alloying and microstructural solutions that enable both, an intrinsically high resilience to H and high mechanical performance, must be found. Here we introduce a counterintuitive strategy to exploit typically undesired chemical heterogeneity within the material's microstructure that allows the local enhancement of crack resistance and local H trapping, thereby enhancing the resistance against H embrittlement. We deploy this approach to a lightweight, high-strength steel and produce a high-number density Mn-rich zones dispersed within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting H-induced microcracks thus interrupting the H-assisted damage evolution chain, regardless of how and when H is introduced and also regardless of the underlying embrittling mechanisms. A superior H embrittlement resistance, increased by a factor of two compared to a reference material with a homogeneous solute distribution within each microstructure constituent, is achieved at no expense of the material's strength and ductility. △ Less

Submitted 30 August, 2023; originally announced August 2023.

A multiphase-field model for simulating the hydrogen-induced multi-spot corrosion on the surface of polycrystalline metals: Application to uranium metal

Authors: Jie Sheng, Yu Liu, Xiao-Ming Shi, Yue-Chao Wang, Zi-Hang Chen, Ke Xu, Shuai Wu, Hou-Bing Huang, Bo Sun, Hai-Feng Liu, Hai-Feng Song

Abstract: Hydrogen-induced multi-spot corrosion on the surface of polycrystalline rare metals is a complex process, which involves the interactions between phases (metal, hydride and oxide), grain orientations, grain boundaries, and corrosion spots. To accurately simulate this process and comprehend the underlying physics, a theoretical method is required that includes the following mechanisms: i) hydrogen… ▽ More Hydrogen-induced multi-spot corrosion on the surface of polycrystalline rare metals is a complex process, which involves the interactions between phases (metal, hydride and oxide), grain orientations, grain boundaries, and corrosion spots. To accurately simulate this process and comprehend the underlying physics, a theoretical method is required that includes the following mechanisms: i) hydrogen diffusion, ii) phase transformation, iii) elastic interactions between phases, especially, the interactions between the oxide film and the hydride, iv) elastic interactions between grains, and v) interactions between hydrogen solutes and grain boundaries. In this study, we report a multiphase-field model that incorporates all these requirements, and conduct a comprehensive study of hydrogen-induced spot corrosion on the uranium metal surface, including the investigation of the oxide film, multi-spot corrosion, grain orientation, and grain boundary in the monocrystal, bicrystal, and polycrystal systems. The results indicate that the oxide film can inhibit the growth of hydrides and plays a crucial role in determining the correct morphology of the hydride at the triple junction of phases. The elastic interaction between multiple corrosion spots causes the merging of corrosion spots and promotes the growth of hydrides. The introduction of grain orientations and grain boundaries results in a variety of intriguing intracrystalline and intergranular hydride morphologies. The model presented here is generally applicable to the hydrogen-induced multi-spot corrosion on any rare metal surface. △ Less

Submitted 30 June, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Comments: 22 pages (text), 16 figures (text), 2 tables (text), 9 pages (SI), 13 figures (SI)

Journal ref: Comp. Mater. Sci. 235 (2024) 112779

Proton Collective Quantum Tunneling Induces Anomalous Thermal Conductivity of Ice under Pressure

Authors: Yufeng Wang, Ripeng Luo, Jian Chen, Xuefeng Zhou, Shanmin Wang, Junqiao Wu, Feiyu Kang, Kuang Yu, Bo Sun

Abstract: Proton tunneling is believed to be non-local in ice but has never been shown experimentally. Here we measured thermal conductivity of ice under pressure up to 50 GPa and found it to increase with pressure until 20 GPa but decrease at higher pressures. We attribute this anomalous drop of thermal conductivity to the collective tunneling of protons at high pressures, supported by large-scale quantum… ▽ More Proton tunneling is believed to be non-local in ice but has never been shown experimentally. Here we measured thermal conductivity of ice under pressure up to 50 GPa and found it to increase with pressure until 20 GPa but decrease at higher pressures. We attribute this anomalous drop of thermal conductivity to the collective tunneling of protons at high pressures, supported by large-scale quantum molecular dynamics simulations. The collective tunneling loops span several picoseconds in time and are as large as nanometers in space, which match the phonon periods and wavelengths, leading to strong phonon scattering at high pressures. Our results show direct evidence of collective quantum motion existing in high-pressure ice and provide a new perspective to understanding the coupling between phonon propagation and atomic tunneling. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Whats special about Y6; the working mechanism of neat Y6 organic solar cell

Authors: Elifnaz Saglamkaya, Artem Musiienko, Mohammad Saeed Shadabroo, Bowen Sun, Sreelakshmi Chandrabose, Giulia Lo Gerfo M, Niek F van Hulst, Dieter Neher, Safa Shoaee

Abstract: Non-fullerene acceptors (NFA) have delivered advance in bulk heterojunction organic solar cell efficiencies, with the significant milestone of 20% now in sight. However, these materials challenge the accepted wisdom of how organic solar cells work. In this work we present neat Y6 device with efficiency above 4.5%. We thoroughly investigate mechanisms of charge generation and recombination as well… ▽ More Non-fullerene acceptors (NFA) have delivered advance in bulk heterojunction organic solar cell efficiencies, with the significant milestone of 20% now in sight. However, these materials challenge the accepted wisdom of how organic solar cells work. In this work we present neat Y6 device with efficiency above 4.5%. We thoroughly investigate mechanisms of charge generation and recombination as well as transport in order to understand what is special about Y6. Our data suggest Y6 generates bulk free charges, with ambipolar mobility, which can be extracted in the presence of transport layers △ Less

Submitted 21 April, 2023; originally announced April 2023.

Comments: 11 pages, 5 figures

Journal ref: https://pubs.rsc.org/en/content/articlelanding/2023/MH/D2MH01411D

Anticorrelated Photoluminescence and Free Charge Generation Proves Field-Assisted Exciton Dissociation in Low-Offset PM6:Y5 Organic Solar Cells

Authors: Manasi Pranav, Thomas Hultzsch, Artem Musiienko, Bowen Sun, Atul Shukla, Frank Jaiser, Safa Shoaee, Dieter Neher

Abstract: Understanding the origin of inefficient photocurrent generation in organic solar cells with low energy offset remains key to realizing high performance donor-acceptor systems. Here, we probe the origin of field-dependent free charge generation and photoluminescence in non-fullerene acceptor (NFA) based organic solar cells using the polymer PM6 and NFA Y5 - a non-halogenated sibling to Y6, with a s… ▽ More Understanding the origin of inefficient photocurrent generation in organic solar cells with low energy offset remains key to realizing high performance donor-acceptor systems. Here, we probe the origin of field-dependent free charge generation and photoluminescence in non-fullerene acceptor (NFA) based organic solar cells using the polymer PM6 and NFA Y5 - a non-halogenated sibling to Y6, with a smaller energetic offset to PM6. By performing time-delayed collection field (TDCF) measurements on a variety of samples with different electron transport layers and active layer thickness, we show that the fill factor and photocurrent are limited by field-dependent free charge generation in the bulk of the blend. We also introduce a new method of TDCF called m-TDCF to prove the absence of artefacts from non-geminate recombination of photogenerated- and dark charge carriers near the electrodes. We then correlate free charge generation with steady state photoluminescence intensity, and find perfect anticorrelation between these two properties. Through this, we conclude that photocurrent generation in this low offset system is entirely controlled by the field dependent exciton dissociation into charge transfer states. △ Less

Submitted 11 April, 2023; originally announced April 2023.

Journal ref: APL Mater. 11, 061111 (2023)

Phase diagram of superconducting vortex ratchet motion in a superlattice with noncentrosymmetry

Authors: Shengyao Li, Lijuan Zhang, Ke Huang, Chen Ye, Tingjing Xing, Liu Yang, Zherui Yang, Qiang Zhu, Bo Sun, Xueyan Wang, X. Renshaw Wang

Abstract: Ratchet motion of superconducting vortices, which is a directional flow of vortices in superconductors, is highly useful for exploring quantum phenomena and developing superconducting devices, such as superconducting diode and microwave antenna. However, because of the challenges in the quantitative characterization of the dynamic motion of vortices, a phase diagram of the vortex ratchet motion is… ▽ More Ratchet motion of superconducting vortices, which is a directional flow of vortices in superconductors, is highly useful for exploring quantum phenomena and developing superconducting devices, such as superconducting diode and microwave antenna. However, because of the challenges in the quantitative characterization of the dynamic motion of vortices, a phase diagram of the vortex ratchet motion is still missing, especially in the superconductors with low dimensional structures. Here we establish a quantitative phase diagram of the vortex ratchet motion in a highly anisotropic superlattice superconductor, (SnS)1.17NbS2, using nonreciprocal magnetotransport. The (SnS)1.17NbS2, which possesses a layered atomic structure and noncentrosymmetry, exhibits nonreciprocal magnetotransport in a magnetic field perpendicular and parallel to the plane, which is considered a manifest of ratchet motion of superconducting vortices. We demonstrated that the ratchet motion is responsive to current excitation, magnetic field and thermal perturbation. Furthermore, we extrapolated a giant nonreciprocal coefficient (γ), which quantitatively describes the magnitude of the vortex ratchet motion, and eventually established phase diagrams of the ratchet motion of the vortices with a quantitative description. Last, we propose that the ratchet motion originates from the coexistence of pancake vortices (PVs) and Josephson vortices (JVs). The phase diagrams are desirable for controlling the vortex motion in superlattice superconductors and developing next-generation energy-efficient superconducting devices. △ Less

Submitted 19 November, 2022; originally announced November 2022.

Engineering and probing non-Abelian chiral spin liquids using periodically driven ultracold atoms

Authors: Bo-Ye Sun, Nathan Goldman, Monika Aidelsburger, Marin Bukov

Abstract: We propose a scheme to implement Kitaev's honeycomb model with cold atoms, based on a periodic (Floquet) drive, in view of realizing and probing non-Abelian chiral spin liquids using quantum simulators. We derive the effective Hamiltonian to leading order in the inverse-frequency expansion, and show that the drive opens up a topological gap in the spectrum without mixing the effective Majorana and… ▽ More We propose a scheme to implement Kitaev's honeycomb model with cold atoms, based on a periodic (Floquet) drive, in view of realizing and probing non-Abelian chiral spin liquids using quantum simulators. We derive the effective Hamiltonian to leading order in the inverse-frequency expansion, and show that the drive opens up a topological gap in the spectrum without mixing the effective Majorana and vortex degrees of freedom. We address the challenge of probing the physics of Majorana fermions, while having only access to the original composite spin degrees of freedom. Specifically, we propose to detect the properties of the chiral spin liquid phase using gap spectroscopy and edge quenches in the presence of the Floquet drive. The resulting chiral edge signal, which relates to the thermal Hall effect associated with neutral Majorana currents, is found to be robust for realistically-prepared states. By combining strong interactions with Floquet engineering, our work paves the way for future studies of non-Abelian excitations and quantized thermal transport using quantum simulators. △ Less

Submitted 28 June, 2023; v1 submitted 17 November, 2022; originally announced November 2022.

Journal ref: PRX Quantum 4, 020329 (2023)

Atomic-scale Deformation Process of Glasses Unveiled by Stress-induced Structural Anisotropy

Authors: Jie Dong, Hailong Peng, Hui Wang, Yang Tong, Yutian Wang, Wojciech Dmowski, Baoan Sun, Takeshi Egami, Weihua Wang, Haiyang Bai

Abstract: Experimentally resolving atomic-scale structural changes of a deformed glass remains challenging owing to the disordered nature of glass structure. Here, we show that the structural anisotropy emerges as a general hallmark for different types of glasses (metallic glasses, oxide glass, amorphous selenium, and polymer glass) after thermo-mechanical deformation, and it is highly correlates with local… ▽ More Experimentally resolving atomic-scale structural changes of a deformed glass remains challenging owing to the disordered nature of glass structure. Here, we show that the structural anisotropy emerges as a general hallmark for different types of glasses (metallic glasses, oxide glass, amorphous selenium, and polymer glass) after thermo-mechanical deformation, and it is highly correlates with local nonaffine atomic displacements detected by the high-energy X-ray diffraction technique. By analyzing the anisotropic pair density function, we unveil the atomic-level mechanism responsible for the plastic flow, which notably differs between metallic glasses and covalent glasses. The structural rearrangements in metallic glasses are mediated through cutting and formation of atomic bonds, which occurs in some localized inelastic regions embedded in elastic matrix, whereas that of covalent glasses is mediated through the rotation of atomic bonds or chains without bond length change, which occurs in a less localized manner. △ Less

Submitted 28 May, 2022; originally announced May 2022.

Comments: 19 pages, 4 figures

A Phase-field model for simulating hydrogen-induced pitting corrosion with solid-solid phase transformation in the metal

Authors: Jie Sheng, Yue-Chao Wang, Yu Liu, Shuai Wu, Ke Xu, Zi-Hang Chen, Bo Sun, Hai-Feng Liu, Hai-Feng Song

Abstract: Hydrogen-induced pitting corrosion of metallic is a common phenomenon that damages the integrity and durability of the materials. Its numerical simulation is still a challenge due to many complex mechanisms, especially solid-solid phase transformation and mechanical interaction, leading to the anisotropic growth of hydride and inducing some bulges on the metal surface. In our work, we propose a ph… ▽ More Hydrogen-induced pitting corrosion of metallic is a common phenomenon that damages the integrity and durability of the materials. Its numerical simulation is still a challenge due to many complex mechanisms, especially solid-solid phase transformation and mechanical interaction, leading to the anisotropic growth of hydride and inducing some bulges on the metal surface. In our work, we propose a phase-field model and numerical technique for simulation of hydrogen-induced pitting corrosion, and apply it to the system of $α$-Uranium. In our model, the elastic strain energy is introduced to approximate the anisotropic pit morphology induced by the mechanical interaction between metal and hydride. For the numerical technique, the free boundary condition based on the finite element method is adopted to introduce the bulges of the metal surface. By the application of our model and numerical technique, the anisotropic pit morphology with a bulge on the metal surface in agreement with experiments of $α$-Uranium is obtained. Moreover, the compression of $α$-Uranium and the dilation of its hydride are discovered, which develops the deep understanding of hydrogen-induced pitting corrosion. This model is expected to be applied to the health detection of hydrogen-induced pitting corrosion of metal in the industry. △ Less

Submitted 28 March, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 11 pages (text), 8 figures (text), 1 table (text), 5 pages (SI), 5 figures (SI) and 1 table (SI)

Journal ref: Comp. Mater. Sci. 213 (2022) 111663

Stable and Solution-Processable Cumulenic sp-Carbon Wires: A New Paradigm for Organic Electronics

Authors: Stefano Pecorario, Alberto D. Scaccabarozzi, Daniele Fazzi, Edgar Gutiérrez-Fernández, Vito Vurro, Lorenzo Maserati, Mengting Jiang, Tommaso Losi, Bozheng Sun, Rik R. Tykwinski, Carlo S. Casari, Mario Caironi

Abstract: Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of l… ▽ More Solution-processed, large-area, and flexible electronics largely relies on the excellent electronic properties of sp$^2$-hybridized carbon molecules, either in the form of $π$-conjugated small molecules and polymers or graphene and carbon nanotubes. Carbon with sp-hybridization, the foundation of the elusive allotrope carbyne, offers vast opportunities for functionalized molecules in the form of linear carbon atomic wires (CAWs), with intriguing and even superior predicted electronic properties. While CAWs represent a vibrant field of research, to date, they have only been applied sparingly to molecular devices. The recent observation of the field-effect in microcrystalline cumulenes suggests their potential applications in solution-processed thin-film transistors but concerns surrounding the stability and electronic performance have precluded developments in this direction. In the present study, ideal field-effect characteristics are demonstrated for solution-processed thin films of tetraphenyl[3]cumulene, the shortest semiconducting CAW. Films are deposited through a scalable, large-area, meniscus-coating technique, providing transistors with hole mobilities in excess of 0.1 cm$^2$ V$^{-1}$ s$^{-1}$, as well as promising operational stability under dark conditions. These results offer a solid foundation for the exploitation of a vast class of molecular semiconductors for organic electronics based on sp-hybridized carbon systems and create a previously unexplored paradigm. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Journal ref: Adv. Mater. 2022, 2110468

Incoherent phonon transport dominates heat conduction across van der Waals superlattices

Authors: Lu Zhao, Lijuan Zhang, Houfu Song, Hongda Du, Renshaw X. Wang, Junqiao Wu, Feiyu Kang, Bo Sun

Abstract: Heat conduction mechanisms in superlattices could be different across different types of interfaces. Van der Waals superlattices are structures physically assembled through weak van der Waals interactions by design, and may host properties beyond the traditional limits of lattice matching and processing compatibility, offering new types of interfaces. In this work, natural van der Waals (SnS)1.17(… ▽ More Heat conduction mechanisms in superlattices could be different across different types of interfaces. Van der Waals superlattices are structures physically assembled through weak van der Waals interactions by design, and may host properties beyond the traditional limits of lattice matching and processing compatibility, offering new types of interfaces. In this work, natural van der Waals (SnS)1.17(NbS2)n superlattices are synthesized, and their thermal conductivities are measured by time-domain thermoreflectance as a function of interface density. Our results show that heat conduction of (SnS)1.17(NbS2)n superlattices is dominated by interface scattering when the coherent length of phonons is larger than the superlattice period, indicating incoherent phonon transport dominates cross-plane heat conduction in van der Waals superlattices even when the period is atomically thin and abrupt. Moreover, our result suggests that the widely accepted heat conduction mechanism for conventional superlattices that coherent phonons dominate when the period is short, is not applicable due to symmetry breaking in most van der Waals superlattices. Our findings provide new insight for understanding the thermal behavior of van der Waals superlattices, and devise approaches for effective thermal management of superlattices depending on the distinct types of interfaces. △ Less

Submitted 12 February, 2022; originally announced February 2022.

Comments: 31 pages, 7 figures

Hydrogen trapping and embrittlement in high-strength Al-alloys

Authors: Huan Zhao, Poulami Chakraborty, Dirk Ponge, Tilmann Hickel, Binhan Sun, Chun-Hung Wu, Baptiste Gault, Dierk Raabe

Abstract: Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elus… ▽ More Ever more stringent regulations on greenhouse gas emissions from transportation motivate efforts to revisit materials used for vehicles. High-strength Al-alloys often used in aircrafts could help reduce the weight of automobiles, but are susceptible to environmental degradation. Hydrogen (H) "embrittlement" is often pointed as the main culprit, however, the mechanisms underpinning failure are elusive: atomic-scale analysis of H inside an alloy remains a challenge, and this prevents deploying alloy design strategies to enhance the materials' durability. Here we successfully performed near-atomic scale analysis of H trapped in second-phase particles and at grain boundaries in a high-strength 7xxx Al-alloy. We used these observations to guide atomistic ab-initio calculations which show that the co-segregation of alloying elements and H favours grain boundary decohesion, while the strong partitioning of H into the second-phases removes solute H from the matrix, hence preventing H-embrittlement. Our insights further advance the mechanistic understanding of H-assisted embrittlement in Al-alloys, emphasizing the role of H-traps in retarding cracking and guiding new alloy design. △ Less

Submitted 12 January, 2022; originally announced January 2022.

Evidence for equilibrium excitons and exciton condensation in monolayer WTe2

Authors: Bosong Sun, Wenjin Zhao, Tauno Palomaki, Zaiyao Fei, Elliott Runburg, Paul Malinowski, Xiong Huang, John Cenker, Yong-Tao Cui, Jiun-Haw Chu, Xiaodong Xu, S. Samaneh Ataei, Daniele Varsano, Maurizia Palummo, Elisa Molinari, Massimo Rontani, David H. Cobden

Abstract: A single monolayer of the layered semimetal WTe2 behaves as a two-dimensional topological insulator, with helical conducting edge modes surrounding a bulk state that becomes insulating at low temperatures. Here we present evidence that the bulk state has a very unusual nature, containing electrons and holes bound by Coulomb attraction (excitons) that spontaneously form in thermal equilibrium. On c… ▽ More A single monolayer of the layered semimetal WTe2 behaves as a two-dimensional topological insulator, with helical conducting edge modes surrounding a bulk state that becomes insulating at low temperatures. Here we present evidence that the bulk state has a very unusual nature, containing electrons and holes bound by Coulomb attraction (excitons) that spontaneously form in thermal equilibrium. On cooling from room temperature to 100 K the conductivity develops a V-shaped dependence on electrostatic doping, while the chemical potential develops a ~43 meV step at the neutral point. These features are much sharper than is possible in an independent-electron picture, but they can be largely accounted for by positing that some of the electrons and holes are paired in equilibrium. Our calculations from first principles show that the exciton binding energy is larger than 100 meV and the radius as small as 4 nm, explaining their formation at high temperature and doping levels. Below 100 K more strongly insulating behavior is seen, suggesting that a charge-ordered state forms. The observed absence of charge density waves in this state appears surprising within an excitonic insulator picture, but we show that it can be explained by the symmetries of the exciton wave function. Monolayer WTe2 therefore presents an exceptional combination of topological properties and strong correlations over a wide temperature range. △ Less

Submitted 26 October, 2021; originally announced October 2021.

Comments: Initial submission. Includes supplementary information. Revised version to appear in Nature Physics

Thermal Conductivity of BAs under Pressure

Authors: Songrui Hou, Bo Sun, Fei Tian, Qingan Cai, Shanming Wang, Wanyue Peng, Xi Chen, Zhifeng Ren, Chen Li, Richard Wilson

Abstract: The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BA… ▽ More The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time-domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of thermal conductivity of BAs shows the important relationship between phonon dispersion properties and three- and four-phonon scattering rates. △ Less

Submitted 16 February, 2023; v1 submitted 1 October, 2021; originally announced October 2021.

Role of electron and ion irradiation in a reliable lift-off process with e-beam evaporation and a bilayer PMMA resist system

Authors: Bin Sun, Thomas Grap, Thorben Frahm, Stefan Scholz, Joachim Knoch

Abstract: This paper addresses issues related to cracking and blisters in deposited films encountered in a lift-off process with electron beam evaporation and a bilayer PMMA resist system. The impact of charged particles, i.e. electrons and ions, is investigated using an electron beam evaporation chamber equipped with ring-magnets and a plate electrode placed in front of the sample. By replacing the plate e… ▽ More This paper addresses issues related to cracking and blisters in deposited films encountered in a lift-off process with electron beam evaporation and a bilayer PMMA resist system. The impact of charged particles, i.e. electrons and ions, is investigated using an electron beam evaporation chamber equipped with ring-magnets and a plate electrode placed in front of the sample. By replacing the plate electrode with a hollow cylinder, the modified evaporation setup utilizing passive components allows a complete elimination of resist shrinkage and blistering yielding near perfect deposition results for a large variety of different materials. △ Less

Submitted 26 April, 2021; originally announced April 2021.

Comments: 9 pages

Journal ref: Journal of Vacuum Science & Technology B 39, 052601 (2021)

A triple-mode mid-infrared modulator for all-surface radiative thermal management

Authors: Haoming Fang, Wanrong Xie, Xiuqiang Li, Kebin Fan, Yi-Ting Lai, Bowen Sun, Shulin Bai, Willie J. Padilla, Po-Chun Hsu

Abstract: Thermal management is ubiquitous in the modern world and indispensable for a sustainable future. Radiative heat management provides unique advantages because the heat transfer can be controlled by the surface. However, different surface emissivities require different tuning strategies. Here, we demonstrate a triple-mode mid-infrared modulator that can switch between passive heating and cooling sui… ▽ More Thermal management is ubiquitous in the modern world and indispensable for a sustainable future. Radiative heat management provides unique advantages because the heat transfer can be controlled by the surface. However, different surface emissivities require different tuning strategies. Here, we demonstrate a triple-mode mid-infrared modulator that can switch between passive heating and cooling suitable for all types of object surface emissivities. The device is composed of a surface-textured infrared-semi-transparent elastomer coated with a metallic back reflector, which is biaxially strained to sequentially achieve three fundamental modes: emission, reflection, and transmission. By analyzing and optimizing the coupling between optical and mechanical properties, we achieve a performance of emittance contrast = 0.58, transmittance contrast = 0.49, and reflectance contrast = 0.39. The device can provide a new design paradigm of radiation heat regulation to develop the next generation wearable devices, robotics, and camouflage technology. △ Less

Submitted 8 March, 2021; originally announced April 2021.

Determination of the spin axis in quantum spin Hall insulator monolayer WTe2

Authors: Wenjin Zhao, Elliott Runburg, Zaiyao Fei, Joshua Mutch, Paul Malinowski, Bosong Sun, Xiong Huang, Dmytro Pesin, Yong-Tao Cui, Xiaodong Xu, Jiun-Haw Chu, David H. Cobden

Abstract: Evidence for the quantum spin Hall (QSH) effect has been reported in several experimental systems in the form of approximately quantized edge conductance. However, the most fundamental feature of the QSH effect, spin-momentum locking in the edge channels, has never been demonstrated experimentally. Here, we report clear evidence for spin-momentum locking in the edge channels of monolayer WTe2, tho… ▽ More Evidence for the quantum spin Hall (QSH) effect has been reported in several experimental systems in the form of approximately quantized edge conductance. However, the most fundamental feature of the QSH effect, spin-momentum locking in the edge channels, has never been demonstrated experimentally. Here, we report clear evidence for spin-momentum locking in the edge channels of monolayer WTe2, thought to be a two-dimensional topological insulator (2D TI). We observe that the edge conductance is controlled by the component of an applied magnetic field perpendicular to a particular axis, which we identify as the spin axis. The axis is the same for all edges, situated in the mirror plane perpendicular to the tungsten chains at 40$\pm$2° to the layer normal, implying that the spin-orbit coupling is inherited from the bulk band structure. We show that this finding is consistent with theory if the band-edge orbitals are taken to have like parity. We conclude that this parity assignment is correct and that both edge states and bulk bands in monolayer WTe2 share the same simple spin structure. Combined with other known features of the edge states this establishes spin-momentum locking, and therefore that monolayer WTe2 is truly a natural 2D TI. △ Less

Submitted 1 March, 2021; v1 submitted 19 October, 2020; originally announced October 2020.

Journal ref: Phys. Rev. X 11, 041034 (2021)

Detuning Axis Pulsed Spectroscopy of Valley-Orbital States in Si/SiGe Quantum Dots

Authors: Edward H. Chen, Kate Raach, Andrew Pan, Andrey A. Kiselev, Edwin Acuna, Jacob Z. Blumoff, Teresa Brecht, Maxwell Choi, Wonill Ha, Daniel Hulbert, Michael P. Jura, Tyler Keating, Ramsey Noah, Bo Sun, Bryan J. Thomas, Matthew Borselli, C. A. C. Jackson, Matthew T. Rakher, Richard S. Ross

Abstract: Silicon quantum dot qubits must contend with low-lying valley excited states which are sensitive functions of the quantum well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated Si/SiGe double quantum dots using standard baseband pulsing techniq… ▽ More Silicon quantum dot qubits must contend with low-lying valley excited states which are sensitive functions of the quantum well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated Si/SiGe double quantum dots using standard baseband pulsing techniques, easing the extraction of energy spectra in multiple-dot devices. We use this method to measure dozens of valley excited state energies spanning multiple wafers, quantum dots, and orbital states, crucial for evaluating the dependence of valley splitting on quantum well width and other epitaxial conditions. Our results suggest that narrower wells can be beneficial for improving valley splittings, but this effect can be confounded by variations in growth and fabrication conditions. These results underscore the importance of valley splitting measurements for guiding the development of Si qubits. △ Less

Submitted 26 February, 2021; v1 submitted 9 October, 2020; originally announced October 2020.

Comments: 13 pages, 12 figures. accepted for publication by Physical Review Applied

Journal ref: Phys. Rev. Applied 15, 044033 (2021)

Machine-learning-enhanced time-of-flight mass spectrometry analysis

Authors: Ye Wei, Rama Srinivas Varanasi, Torsten Schwarz, Leonie Gomell, Huan Zhao, David J. Larson, Binhan Sun, Geng Liu, Hao Chen, Dierk Raabe, Baptiste Gault

Abstract: Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's e… ▽ More Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based from patterns formed in their mass-to-charge ratios and relative isotopic abundances. However, this identification step still mainly relies on individual user's expertise, making its standardization challenging, and hindering efficient data processing. Here, we introduce an approach that leverages modern machine learning technique to identify peak patterns in time-of-flight mass spectra within microseconds, outperforming human users without loss of accuracy. Our approach is cross-validated on mass spectra generated from different time-of-flight mass spectrometry(ToF-MS) techniques, offering the ToF-MS community an open-source, intelligent mass spectra analysis. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Comments: 20 pages, 15 figures

Magnetic Gradient Fluctuations from Quadrupolar $^{73}$Ge in Si/SiGe Exchange-Only Qubits

Authors: J. Kerckhoff, B. Sun, B. H. Fong, C. Jones, A. A. Kiselev, D. W. Barnes, R. S. Noah, E. Acuna, M. Akmal, S. D. Ha, J. A. Wright, B. J. Thomas, C. A. C. Jackson, L. F. Edge, K. Eng, R. S. Ross, T. D. Ladd

Abstract: We study the time-fluctuating magnetic gradient noise mechanisms in pairs of Si/SiGe quantum dots using exchange echo noise spectroscopy. We find through a combination of spectral inversion and correspondence to theoretical modeling that quadrupolar precession of the $^{73}$Ge nuclei play a key role in the spin-echo decay time $T_2$, with a characteristic dependence on magnetic field and the width… ▽ More We study the time-fluctuating magnetic gradient noise mechanisms in pairs of Si/SiGe quantum dots using exchange echo noise spectroscopy. We find through a combination of spectral inversion and correspondence to theoretical modeling that quadrupolar precession of the $^{73}$Ge nuclei play a key role in the spin-echo decay time $T_2$, with a characteristic dependence on magnetic field and the width of the Si quantum well. The $^{73}$Ge noise peaks appear at the fundamental and first harmonic of the $^{73}$Ge Larmor resonance, superimposed over $1/f$ noise due to $^{29}$Si dipole-dipole dynamics, and are dependent on material epitaxy and applied magnetic field. These results may inform the needs of dynamical decoupling when using Si/SiGe quantum dots as qubits in quantum information processing devices. △ Less

Submitted 17 September, 2020; originally announced September 2020.

Comments: 17 pages, 11 figures

Journal ref: PRX Quantum 2, 010347 (2021)

Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel

Authors: Andrew J. Breen, Leigh T. Stephenson, Binhan Sun, Yujiao Li, Olga Kasian, Dierk Raabe, Michael Herbig, Baptiste Gault

Abstract: Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano… ▽ More Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, ε=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trapping sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Plasmon-field-induced Metastable States in the Wetting Layer: Detected by the Fluorescence Decay Time of InAs/GaAs Single Quantum Dots

Authors: Hao Chen, Junhui Huang, Xiaowu He, Kun Ding, Haiqiao Ni, Zhichuan Niu, Desheng Jiang, Xiuming Dou, Baoquan Sun

Abstract: We report a new way to slow down the spontaneous emission rate of excitons in the wetting layer (WL) through radiative field coupling between the exciton emissions and the dipole field of metal islands. As a result, a long-lifetime decay process is detected in the emission of InAs/GaAs single quantum dots (QDs). It is found that when the separation distance from WL layer (QD layer) to the metal is… ▽ More We report a new way to slow down the spontaneous emission rate of excitons in the wetting layer (WL) through radiative field coupling between the exciton emissions and the dipole field of metal islands. As a result, a long-lifetime decay process is detected in the emission of InAs/GaAs single quantum dots (QDs). It is found that when the separation distance from WL layer (QD layer) to the metal islands is around 20 nm and the islands have an average size of approximately 50 nm, QD lifetime may change from approximately 1 to 160 ns. The corresponding second-order autocorrelation function g(2) (τ) changes from antibunching into a bunching and antibunching characteristics due to the existence of long-lived metastable states in the WL. This phenomenon can be understood by treating the metal islands as many dipole oscillators in the dipole approximation, which may cause destructive interference between the exciton dipole field and the induced dipole field of metal islands. △ Less

Submitted 20 July, 2020; originally announced July 2020.

Modeling Multi-Cellular Dynamics Regulated by ECM-Mediated Mechanical Communication via Active Particles with Polarized Effective Attraction

Authors: Yu Zheng, Qihui Fan, Christopher Eddy, Xiaochen Wang, Bo Sun, Fangfu Ye, Yang Jiao

Abstract: Collective cell migration is crucial to many physiological and pathological processes. Recent experimental studies have indicated that the active traction forces generated by migrating cells in fibrous extracellular matrix (ECM) can mechanically remodel the ECM, enabling long-range propagation of cellular forces and leading to correlated migration dynamics regulated by the mechanical communication… ▽ More Collective cell migration is crucial to many physiological and pathological processes. Recent experimental studies have indicated that the active traction forces generated by migrating cells in fibrous extracellular matrix (ECM) can mechanically remodel the ECM, enabling long-range propagation of cellular forces and leading to correlated migration dynamics regulated by the mechanical communication among the cells. Motivated by these experimental discoveries, we develop an active-particle model with polarized effective attractions (APPA) for modeling emergent multi-cellular migration dynamics regulated by ECM-mediated mechanical communications. Active particles with polarized pairwise attractions exhibit enhanced aggregation behaviors compared to classic active Brownian particles, especially at lower particle densities and larger rotational diffusivities. Importantly, in contrast to the classic ABP system, the high-density phase of APPA system exhibits strong dynamic correlation, which is characterized by the slowly decaying velocity correlation functions with a correlation length comparable to the linear size of high-density phase domain (i.e., cluster of the particles). The strongly correlated multi-cellular dynamics predicted by the APPA model are subsequently verified in {\it in vitro} experiments using MCF-10A cells. Our studies also indicate the importance of incorporating ECM-mediated mechanical coupling among the migrating cells for appropriately modeling emergent multi-cellular dynamics in complex micro-environments. △ Less

Submitted 3 April, 2020; originally announced April 2020.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. E 102, 052409 (2020)

Comparative study of hydrogen embrittlement resistance between additively and conventionally manufactured austenitic stainless steels

Authors: Dong-Hyun Lee, Binhan Sun, Subin Lee, Dirk Ponge, Eric A. Jägle, Dierk Raabe

Abstract: Hydrogen embrittlement in 304L (18wt.% Cr, 8-10wt.% Ni) austenitic stainless steel (ASS) fabricated by laser powder-bed-fusion (LPBF) was investigated by tensile testing after electrochemical hydrogen pre-charging and compared to conventionally available 304L ASSs with two different processing histories, (i) casting plus annealing (CA) and (ii) CA plus thermomechanical treatment (TMT). It was reve… ▽ More Hydrogen embrittlement in 304L (18wt.% Cr, 8-10wt.% Ni) austenitic stainless steel (ASS) fabricated by laser powder-bed-fusion (LPBF) was investigated by tensile testing after electrochemical hydrogen pre-charging and compared to conventionally available 304L ASSs with two different processing histories, (i) casting plus annealing (CA) and (ii) CA plus thermomechanical treatment (TMT). It was revealed that hydrogen-charging led to a significant reduction in ductility for the CA sample, but only a small effect of hydrogen was observed for the LPBF and CA-TMT samples. Hydrogen-assisted cracking behavior was found to be strongly linked to strain-induced martensitic transformation. In addition, the amount of alpha' martensite was much higher in the CA sample than in other samples, suggesting that severe hydrogen embrittlement can be correlated with the low mechanical stability of austenite. Detailed microstructural characterization showed that low austenite stability of the CA sample was mainly attributed to the retained content of delta ferrite and the chemical inhomogeneity inside the gamma matrix (gamma close to delta has ~2 wt.% higher Cr but ~2 wt.% lower Ni), but TMT enhanced the chemical homogeneity and thus austenite stability. By contrast, the LPBF process led directly, i.e. without any thermomechanical treatment, to a fully austenitic structure with homogeneous elemental distribution in the ASS. These results confirmed that the presence of delta and the chemical inhomogeneity inside gamma matrix, which promoted the deformation-induced martensitic transformation and the associated H enrichment at the gamma-alpha' interface, was the primary reason for the severe H-assisted failure. △ Less

Submitted 31 March, 2020; originally announced April 2020.

Comments: 40 pages, 15 Figures

Magnetic proximity and nonreciprocal current switching in a monolayer WTe2 helical edge

Authors: Wenjin Zhao, Zaiyao Fei, Tiancheng Song, Han Kyou Choi, Tauno Palomaki, Bosong Sun, Paul Malinowski, Michael A. McGuire, Jiun-Haw Chu, Xiaodong Xu, David H. Cobden

Abstract: The integration of diverse electronic phenomena, such as magnetism and nontrivial topology, into a single system is normally studied either by seeking materials that contain both ingredients, or by layered growth of contrasting materials. The ability to simply stack very different two dimensional (2D) van der Waals materials in intimate contact permits a different approach. Here we use this approa… ▽ More The integration of diverse electronic phenomena, such as magnetism and nontrivial topology, into a single system is normally studied either by seeking materials that contain both ingredients, or by layered growth of contrasting materials. The ability to simply stack very different two dimensional (2D) van der Waals materials in intimate contact permits a different approach. Here we use this approach to couple the helical edges states in a 2D topological insulator, monolayer WTe2, to a 2D layered antiferromagnet, CrI3. We find that the edge conductance is sensitive to the magnetization state of the CrI3, and the coupling can be understood in terms of an exchange field from the nearest and next-nearest CrI3 layers that produces a gap in the helical edge. We also find that the nonlinear edge conductance depends on the magnetization of the nearest CrI3 layer relative to the current direction. At low temperatures this produces an extraordinarily large nonreciprocal current that is switched by changing the antiferromagnetic state of the CrI3. △ Less

Submitted 2 January, 2020; originally announced January 2020.

"Butterfly Effect" in Shear-Banding Mediated Plasticity of Metallic Glasses

Authors: Baoan Sun, Liping Yu, Gang Wang, Xing Tong, Chuan Geng, Jingtao Wang, Jingli Ren, Weihua Wang

Abstract: Metallic glasses response to the mechanical stress in a complex and inhomogeneous manner with plastic strain highly localized into nanoscale shear bands. Contrary to the well-defined deformation mechanism in crystalline solids, understanding the mechanical response mechanism and its intrinsic correlation with the macroscopical plasticity in metallic glasses remains long-standing issues. Through a… ▽ More Metallic glasses response to the mechanical stress in a complex and inhomogeneous manner with plastic strain highly localized into nanoscale shear bands. Contrary to the well-defined deformation mechanism in crystalline solids, understanding the mechanical response mechanism and its intrinsic correlation with the macroscopical plasticity in metallic glasses remains long-standing issues. Through a combination of experimental and theoretical analysis, we showed that the shear banding process in metallic glasses exhibits complex chaotic dynamics, which manifests as the existence of a torus destroyed phase diagram, a positive Lyapunov exponent and a fractional Lyapunov dimension. We also demonstrated that the experimentally observed large plasticity fluctuation of metallic glasses tested at the same conditions can be interpreted from the chaotic shear-band dynamics, which could leads to an uncertainty on the appearance of the critical condition for runaway shear banding. Physically, the chaotic shear-band dynamics arises from the interplay between structural disordering and temperature rise within the shear band. By tuning the deformation parameters, the chaotic dynamics can be transformed to a periodic orbit state corresponding to a smaller plasticity fluctuation in metallic glasses. Our results suggest that the plastic flow of metallic glasses is a complex dynamic process, which is highly sensitive to initial conditions and reminiscent of the "butterfly effect" as observed in many complex dynamic systems. △ Less

Submitted 10 March, 2020; v1 submitted 25 September, 2019; originally announced September 2019.

Comments: 12 pages, 5 figures

Journal ref: Phys. Rev. B 101, 224111 (2020)

Robust Ultraviolet to Near-infrared Quantum Emitters in Hexagonal Boron Nitride up to 1100 K

Authors: Qing-Hai Tan, Jia-Min Lai, Xue-Lu Liu, Yong-Zhou Xue, Xiu-Ming Dou, Bao-Quan Sun, Wei-Bo Gao, Ping-Heng Tan, Jun Zhang

Abstract: A stable single-photon source working at high temperatures with high brightness and covering full band emission from one host material is critically important for quantum technologies. Here, we find that the certain hBN single-photon emissions (SPEs) can be significantly enhanced by lasers with special wavelengths, which largely broaden the wavelength range of the hBN emitters, down to ultraviolet… ▽ More A stable single-photon source working at high temperatures with high brightness and covering full band emission from one host material is critically important for quantum technologies. Here, we find that the certain hBN single-photon emissions (SPEs) can be significantly enhanced by lasers with special wavelengths, which largely broaden the wavelength range of the hBN emitters, down to ultraviolet (357 nm) and up to near-infrared (912 nm). Importantly, these hBN SPEs are still stable even at the temperature up to 1100 Kelvin. The decoupling between single-photon and acoustic phonon is observed at high temperatures. Our work suggests that hBN can be a good host material for generating single-photon sources with ultrabroad wavelength range. △ Less

Submitted 31 October, 2021; v1 submitted 18 August, 2019; originally announced August 2019.

Comments: 4 Figures

First-Principles Study of Hydrogen Behaviors in $α$-Pu$_{2}$O$_{3}$

Authors: Le Zhang, Bo Sun, Qili Zhang, Haifeng Liu, Kezhao Liu, Haifeng Song

Abstract: The in-depth understanding of hydrogen permeation through plutonium-oxide overlayers is the prerequisite to evaluate the complex hydriding induction period of Pu. In this work, the incorporation, diffusion and dissolution of hydrogen in $α$-Pu$_{2}$O$_{3}$ are investigated by the first-principles calculations and $\textit{ab initio}$ thermodynamic method based on DFT+U and DFT-D3 schemes. Our stud… ▽ More The in-depth understanding of hydrogen permeation through plutonium-oxide overlayers is the prerequisite to evaluate the complex hydriding induction period of Pu. In this work, the incorporation, diffusion and dissolution of hydrogen in $α$-Pu$_{2}$O$_{3}$ are investigated by the first-principles calculations and $\textit{ab initio}$ thermodynamic method based on DFT+U and DFT-D3 schemes. Our study reveals that the hydrogen incorporation is endothermic and the separated H atoms prefer to recombine as H$_{2}$ molecules rather than reacting with $α$-Pu$_{2}$O$_{3}$. The H and H$_{2}$ diffusion are both feasible, generally, H will recombine first as H$_{2}$ and then migrate. Both pressure P$_{H2}$ and temperature can promote the hydrogen dissolution in $α$-Pu$_{2}$O$_{3}$. The single H$_{2}$ molecule incorporation and (H+H$_{2}$) mixed dissolution will successively appear when increasing P$_{H2}$. Compared to PuO$_{2}$, this work indicates that Pu sesquioxide is hardly reduced by hydrogen, but the porous $α$-Pu$_{2}$O$_{3}$ facilitates hydrogen transport in Pu oxide layers. We presents the microscopic picture of hydrogen behaviors in the defect-free $α$-Pu$_{2}$O$_{3}$, which could shed some light on the study of the hydriding induction period of Pu. △ Less

Submitted 14 February, 2020; v1 submitted 16 June, 2019; originally announced June 2019.

Comments: 19 pages, 6 figures

A first-principles-based study of the thermodynamics of competing low-energy states in correlated materials: Example of cuprates

Authors: Robert S. Markiewicz, Yubo Zhang, Christopher Lane, Bernardo Barbiellini Jianwei Sun, Arun Bansil

Abstract: We demonstrate how first-principles calculations of many competing low-energy states of a correlated material, here a cuprate, can be used to develop a thermodynamic model of Mott and pseudogap transitions in terms of magnetic short-range order. Mott physics is found in this picture to be driven by an unbinding of the antiphase domain walls, while the pseudogap phenomenon represents local moment f… ▽ More We demonstrate how first-principles calculations of many competing low-energy states of a correlated material, here a cuprate, can be used to develop a thermodynamic model of Mott and pseudogap transitions in terms of magnetic short-range order. Mott physics is found in this picture to be driven by an unbinding of the antiphase domain walls, while the pseudogap phenomenon represents local moment formation. We provide explanations for nematicity and Fermi arc formation, and find a striking correspondence with many-body perturbation theory predictions. △ Less

Submitted 12 June, 2019; originally announced June 2019.

Comments: 20 pgs, 13 figures

Switching 2D Magnetic States via Pressure Tuning of Layer Stacking

Authors: Tiancheng Song, Zaiyao Fei, Matthew Yankowitz, Zhong Lin, Qianni Jiang, Kyle Hwangbo, Qi Zhang, Bosong Sun, Takashi Taniguchi, Kenji Watanabe, Michael A. McGuire, David Graf, Ting Cao, Jiun-Haw Chu, David H. Cobden, Cory R. Dean, Di Xiao, Xiaodong Xu

Abstract: The physical properties of two-dimensional van der Waals (2D vdW) crystals depend sensitively on the interlayer coupling, which is intimately connected to the stacking arrangement and the interlayer spacing. For example, simply changing the twist angle between graphene layers can induce a variety of correlated electronic phases, which can be controlled further in a continuous manner by applying hy… ▽ More The physical properties of two-dimensional van der Waals (2D vdW) crystals depend sensitively on the interlayer coupling, which is intimately connected to the stacking arrangement and the interlayer spacing. For example, simply changing the twist angle between graphene layers can induce a variety of correlated electronic phases, which can be controlled further in a continuous manner by applying hydrostatic pressure to decrease the interlayer spacing. In the recently discovered 2D magnets, theory suggests that the interlayer exchange coupling strongly depends on layer separation, while the stacking arrangement can even change the sign of the magnetic exchange, thus drastically modifying the ground state. Here, we demonstrate pressure tuning of magnetic order in the 2D magnet CrI3. We probe the magnetic states using tunneling and scanning magnetic circular dichroism microscopy measurements. We find that the interlayer magnetic coupling can be more than doubled by hydrostatic pressure. In bilayer CrI3, pressure induces a transition from layered antiferromagnetic to ferromagnetic phases. In trilayer CrI3, pressure can create coexisting domains of three phases, one ferromagnetic and two distinct antiferromagnetic. The observed changes in magnetic order can be explained by changes in the stacking arrangement. Such coupling between stacking order and magnetism provides ample opportunities for designer magnetic phases and functionalities. △ Less

Submitted 26 May, 2019; originally announced May 2019.

Modeling cell migration regulated by cell-ECM micromechanical coupling

Authors: Yu Zheng, Hanqing Nan, Qihui Fan, Xiaochen Wang, Liyu Liu, Ruchuan Liu, Fangfu Ye, Bo Sun, Yang Jiao

Abstract: Cell migration in fibreous extracellular matrix (ECM) is crucial to many physiological and pathological processes such as tissue regeneration, immune response and cancer progression. During migration, individual cells can generate active pulling forces via actin filament contraction, which are transmitted to the ECM fibers through focal adhesion complexes, remodel the ECM, and eventually propagate… ▽ More Cell migration in fibreous extracellular matrix (ECM) is crucial to many physiological and pathological processes such as tissue regeneration, immune response and cancer progression. During migration, individual cells can generate active pulling forces via actin filament contraction, which are transmitted to the ECM fibers through focal adhesion complexes, remodel the ECM, and eventually propagate to and can be sensed by other cells in the system. The microstructure and physical properties of the ECM can also significantly influence cell migration, e.g., via durotaxis and contact guidance. Here, we develop a computational model for cell migration regulated by cell-ECM micro-mechanical coupling. Our model explicitly takes into account a variety of cellular level processes including focal adhesion formation and disassembly, active traction force generation and cell locomotion due to actin filament contraction, transmission and propagation of tensile forces in the ECM, as well as the resulting ECM remodeling. We validate our model by accurately reproducing single-cell dynamics of MCF-10A breast cancer cells migrating on collagen gels and show that the durotaxis and contact guidance effects naturally arise as a consequence of the cell-ECM micro-mechanical interactions considered in the model. Moreover, our model predicts strongly correlated multi-cellular migration dynamics, which are resulted from the ECM-mediated mechanical coupling among the migrating cell and are subsequently verified in {\it in vitro} experiments using MCF-10A cells. Our computational model provides a robust tool to investigate emergent collective dynamics of multi-cellular systems in complex {\it in vivo} micro-environment and can be utilized to design {\it in vitro} micro-environments to guide collective behaviors and self-organization of cells. △ Less

Submitted 16 May, 2019; originally announced May 2019.

Comments: 11 pages 11 figures

Journal ref: Phys. Rev. E 100, 043303 (2019)