Showing 1–50 of 84 results for author: Stone, H A

Autophoretic skating along permeable surfaces

Authors: Günther Turk, Rajesh Singh, Howard A. Stone

Abstract: The dynamics of self-propelled colloidal particles are strongly influenced by their environment through hydrodynamic and, in many cases, chemical interactions. We develop a theoretical framework to describe the motion of confined active particles by combining the Lorentz reciprocal theorem with a Galerkin discretisation of surface fields, yielding an equation of motion that efficiently captures se… ▽ More The dynamics of self-propelled colloidal particles are strongly influenced by their environment through hydrodynamic and, in many cases, chemical interactions. We develop a theoretical framework to describe the motion of confined active particles by combining the Lorentz reciprocal theorem with a Galerkin discretisation of surface fields, yielding an equation of motion that efficiently captures self-propulsion without requiring an explicit solution for the bulk fluid flow. Applying this framework, we identify and characterise the long-time behaviours of a Janus particle near rigid, permeable, and fluid-fluid interfaces, revealing distinct motility regimes, including surface-bound skating, stable hovering, and chemo-hydrodynamic reflection. Our results demonstrate how the solute permeability and the viscosity contrast of the surface influence a particle's dynamics, providing valuable insights into experimentally relevant guidance mechanisms for autophoretic particles. The computational efficiency of our method makes it particularly well-suited for systematic parameter sweeps, offering a powerful tool for mapping the phase space of confined active particles and informing high-fidelity numerical simulations. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: 29 pages, 16 figures

Revealing Actual Viscoelastic Relaxation Times in Capillary Breakup

Authors: Nan Hu, Jonghyun Hwang, Tachin Ruangkriengsin, Howard A. Stone

Abstract: We use experiments and theory to elucidate the size effect in capillary breakup rheometry, where pre-stretching in the visco-capillary stage causes the apparent relaxation time to be consistently smaller than the actual value. We propose a method accounting for both the experimental size and the finite extensibility of polymers to extract the actual relaxation time. A phase diagram characterizes t… ▽ More We use experiments and theory to elucidate the size effect in capillary breakup rheometry, where pre-stretching in the visco-capillary stage causes the apparent relaxation time to be consistently smaller than the actual value. We propose a method accounting for both the experimental size and the finite extensibility of polymers to extract the actual relaxation time. A phase diagram characterizes the expected measurement variability and delineates scaling law conditions. The results refine capillary breakup rheometry for viscoelastic fluids and advance the understanding of breakup dynamics across scales. △ Less

Submitted 22 March, 2025; v1 submitted 7 March, 2025; originally announced March 2025.

Close-contact melting on hydrophobic textured surfaces: Confinement and meniscus effects

Authors: Nan Hu, Liwu Fan, Xiang Gao, Howard A. Stone

Abstract: We investigate the dynamics of close-contact melting (CCM) on gas-trapped hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid-air meniscus below the liquid film. By employing dual-series and perturbation methods, we obtain numerical solutions for the effective slip lengths associated with velocity $λ$ and temperature $λ_t$ fields, across various value… ▽ More We investigate the dynamics of close-contact melting (CCM) on gas-trapped hydrophobic surfaces, with specific focus on the effects of geometrical confinement and the liquid-air meniscus below the liquid film. By employing dual-series and perturbation methods, we obtain numerical solutions for the effective slip lengths associated with velocity $λ$ and temperature $λ_t$ fields, across various values of aspect ratio $Λ$ (defined as the ratio of the film thickness $h$ to the structure's periodic length $l$) and gas-liquid fraction $φ$. Asymptotic solutions of $λ$ and $λ_t$ for $Λ\ll 1$ and $Λ\gg 1$ are derived and summarized for different surface structures, interface shapes and $Λ$, which reveal a different trend for $λ$ and $Λ\ll 1$ and the presence of a meniscus. In the context of constant-pressure CCM, our results indicate that transverse-grooves surfaces consistently reduced the heat transfer. However, longitudinal grooves can enhance heat transfer under the effects of confinement and meniscus when $Λ\lessapprox 0.1$ and $φ< 1 - 0.5^{2/3} \approx 0.37$. For gravity-driven CCM, the parameters of $l$ and $φ$ determine whether the melting rate is enhanced, reduced, or nearly unaffected. We construct a phase diagram based on the parameter matrix $(\log_{10} l, φ)$to delineate these three regimes. Lastly, we derived two asymptotic solutions for predicting the variation in time of the unmelted solid height. △ Less

Submitted 2 January, 2025; originally announced January 2025.

Journal ref: J. Fluid Mech. 1010 (2025) A46

The 2024 Motile Active Matter Roadmap

Authors: Gerhard Gompper, Howard A. Stone, Christina Kurzthaler, David Saintillan, Fernado Peruani, Dmitry A. Fedosov, Thorsten Auth, Cecile Cottin-Bizonne, Christophe Ybert, Eric Clement, Thierry Darnige, Anke Lindner, Raymond E. Goldstein, Benno Liebchen, Jack Binysh, Anton Souslov, Lucio Isa, Roberto di Leonardo, Giacomo Frangipane, Hongri Gu, Bradley J. Nelson, Fridtjof Brauns, M. Cristina Marchetti, Frank Cichos, Veit-Lorenz Heuthe , et al. (7 additional authors not shown)

Abstract: Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, hi… ▽ More Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, highly responsive, intelligent active materials. A major challenge for understanding and designing active matter is their inherent non-equilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Furthermore, interactions in ensembles of active agents are often non-additive and non-reciprocal. An important aspect of biological agents is their ability to sense the environment, process this information, and adjust their motion accordingly. It is an important goal for the engineering of micro-robotic systems to achieve similar functionality. With many fundamental properties of motile active matter now reasonably well understood and under control, the ground is prepared for the study of physical aspects and mechanisms of motion in complex environments, of the behavior of systems with new physical features like chirality, of the development of novel micromachines and microbots, of the emergent collective behavior and swarming of intelligent self-propelled particles, and of particular features of microbial systems. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter poses major challenges, which can only be addressed by a truly interdisciplinary effort involving scientists from biology, chemistry, ecology, engineering, mathematics, and physics. △ Less

Submitted 29 November, 2024; originally announced November 2024.

Surface Furrowing Instability in Everting Soft Solids

Authors: Jonghyun Hwang, Mariana Altomare, Howard A. Stone

Abstract: We report a surface instability observed during the extrusion of extremely soft elastic solids in confined geometries. Due to their unique rheological properties, these soft solids can migrate through narrow gaps by continuously everting the bulk material. The extrusion front spontaneously buckles in the direction transverse to the flow, resulting in a furrow-like morphology that deepens over time… ▽ More We report a surface instability observed during the extrusion of extremely soft elastic solids in confined geometries. Due to their unique rheological properties, these soft solids can migrate through narrow gaps by continuously everting the bulk material. The extrusion front spontaneously buckles in the direction transverse to the flow, resulting in a furrow-like morphology that deepens over time. We characterize the distinct features of this instability using experiments and theory and contrast the results with known elastic surface instabilities. Our study may provide insights into various processes involving the extrusion-like deformations of soft solids, including biomaterials. △ Less

Submitted 2 January, 2025; v1 submitted 18 October, 2024; originally announced October 2024.

Journal ref: Phys. Rev. Lett. 134, (2025) 058205

Polydisperse polymer fractionation between phases

Authors: J. Pedro de Souza, William M. Jacobs, Howard A. Stone

Abstract: Polymer mixtures fractionate between phases depending on their molecular weight. Consequently, by varying solvent conditions, a polydisperse polymer sample can be separated between phases so as to achieve a particular molecular weight distribution in each phase. In principle, predictive physics-based theories can help guide separation design and interpret experimental fractionation measurements. E… ▽ More Polymer mixtures fractionate between phases depending on their molecular weight. Consequently, by varying solvent conditions, a polydisperse polymer sample can be separated between phases so as to achieve a particular molecular weight distribution in each phase. In principle, predictive physics-based theories can help guide separation design and interpret experimental fractionation measurements. Even so, applying the standard Flory-Huggins model can present a computational challenge for mixtures with many polymeric components of different length, particularly for scarce components at the tails of a distribution. Here, we apply our recently-derived exact analytical solution of multi-component Flory-Huggins theory for polydisperse polymers to understand the principles of polymer fractionation for common molecular weight distributions. Our method reveals that polymer fractionation is highly sensitive to the shape, and in particular the tails, of this distribution. Our results highlight the need for considering the full molecular weight distribution in phase coexistence calculations. △ Less

Submitted 13 September, 2024; originally announced September 2024.

Hydrodynamics of molecular rotors in lipid membranes

Authors: Vinny C. Suja, Naomi Oppenheimer, Howard A. Stone

Abstract: Molecular rotors form twisted conformations upon photoexcitation, with their fluorescent relaxation time serving as a measure of viscosity. They have been used to assess membrane viscosities but yield higher values compared to other methods. Here, we show that the rotor's relaxation time is influenced by a combination of membrane viscosity and interleaflet friction. We present a theory for the rel… ▽ More Molecular rotors form twisted conformations upon photoexcitation, with their fluorescent relaxation time serving as a measure of viscosity. They have been used to assess membrane viscosities but yield higher values compared to other methods. Here, we show that the rotor's relaxation time is influenced by a combination of membrane viscosity and interleaflet friction. We present a theory for the relaxation time and obtain a correction factor that accounts for the discrepancy. If the membrane's viscosity is known, molecular rotors may enable the extraction of the elusive interleaflet friction. △ Less

Submitted 11 December, 2024; v1 submitted 2 August, 2024; originally announced August 2024.

Exact Analytical Solution of the Flory-Huggins Model and Extensions to Multicomponent Systems

Authors: J. Pedro de Souza, Howard A. Stone

Abstract: The Flory-Huggins theory describes the phase separation of solutions containing polymers. Although it finds widespread application from polymer physics to materials science to biology, the concentrations that coexist in separate phases at equilibrium have not been determined analytically, and numerical techniques are required that restrict the theory's ease of application. In this work, we derive… ▽ More The Flory-Huggins theory describes the phase separation of solutions containing polymers. Although it finds widespread application from polymer physics to materials science to biology, the concentrations that coexist in separate phases at equilibrium have not been determined analytically, and numerical techniques are required that restrict the theory's ease of application. In this work, we derive an implicit analytical solution to the Flory-Huggins theory of one polymer in a solvent by applying a procedure that we call the implicit substitution method. While the solutions are implicit and in the form of composite variables, they can be mapped explicitly to a phase diagram in composition space. We apply the same formalism to multicomponent polymeric systems, where we find analytical solutions for polydisperse mixtures of polymers of one type. Finally, while complete analytical solutions are not possible for arbitrary mixtures, we propose computationally efficient strategies to map out coexistence curves for systems with many components of different polymer types. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Triboelectrically mediated self-assembly and manipulation of drops at an interface

Authors: Paul R. Kaneelil, J. Pedro de Souza, Günther Turk, Amir A. Pahlavan, Howard A. Stone

Abstract: The fluid-fluid interface is a complex environment for a floating object where the statics and dynamics may be governed by capillarity, gravity, inertia, and other external body forces. Yet, the alignment of these forces in intricate ways might result in beautiful pattern formation and self-assembly of these objects, as in the case of bubble rafts or colloidal particles. While interfacial self-ass… ▽ More The fluid-fluid interface is a complex environment for a floating object where the statics and dynamics may be governed by capillarity, gravity, inertia, and other external body forces. Yet, the alignment of these forces in intricate ways might result in beautiful pattern formation and self-assembly of these objects, as in the case of bubble rafts or colloidal particles. While interfacial self-assembly has been explored widely, controlled manipulation of floating objects, e.g. drops, at the fluid-fluid interface still remains a challenge largely unexplored. In this work, we reveal the self-assembly and manipulation of water drops floating at an oil-air interface. We show that the assembly occurs due to electrostatic interactions between the drops and their environment. We highlight the role of the boundary surrounding the system by showing that even drops with a net zero electric charge can self-assemble under certain conditions. Using experiments and theory, we show that the depth of the oil bath plays an important role in setting the distance between the self-assembled drops. Furthermore, we demonstrate ways to manipulate the drops actively and passively at the interface. △ Less

Submitted 22 March, 2024; v1 submitted 20 March, 2024; originally announced March 2024.

High-throughput measurement of elastic moduli of microfibers by rope coiling

Authors: Yuan Liu, Jack Hau Yung Lo, Janine K. Nunes, Howard A. Stone, Ho Cheung Shum

Abstract: There are many fields where it is of interest to measure the elastic moduli of tiny fragile fibers, such as filamentous bacteria, actin filaments, DNA, carbon nanotubes, and functional microfibers. The elastic modulus is typically deduced from a sophisticated tensile test under a microscope, but the throughput is low and limited by the time-consuming and skill-intensive sample loading/unloading. H… ▽ More There are many fields where it is of interest to measure the elastic moduli of tiny fragile fibers, such as filamentous bacteria, actin filaments, DNA, carbon nanotubes, and functional microfibers. The elastic modulus is typically deduced from a sophisticated tensile test under a microscope, but the throughput is low and limited by the time-consuming and skill-intensive sample loading/unloading. Here, we demonstrate a simple microfluidic method enabling the high-throughput measurement of the elastic moduli of microfibers by rope coiling using a localized compression, where sample loading/unloading are not needed between consecutive measurements. The rope coiling phenomenon occurs spontaneously when a microfiber flows from a small channel into a wide channel. The elastic modulus is determined by measuring either the buckling length or the coiling radius. The throughput of this method, currently 3,300 fibers per hour, is a thousand times higher than that of a tensile tester. We demonstrate the feasibility of the method by testing a nonuniform fiber with axially varying elastic modulus. We also demonstrate its capability for in situ inline measurement in a microfluidic production line. We envisage that high-throughput measurements may facilitate potential applications such as screening or sorting by mechanical properties and real-time control during production of microfibers. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Journal ref: Proceedings of the National Academy of Sciences 121(12), e2303679121, 2024

Deformation Dynamics of Nanopores upon Water Imbibition

Authors: Juan Sanchez, Lars Dammann, Laura Gallardo, Zhuoqing Li, Michael Fröba, Robert Meissner, Howard A. Stone, Patrick Huber

Abstract: Capillarity-driven transport in nanoporous solids is widespread in nature and crucial for modern liquid-infused engineering materials. During imbibition, curved menisci driven by high negative Laplace pressures exert an enormous contractile load on the porous matrix. Due to the challenge of simultaneously monitoring imbibition and deformation with high spatial resolution, the resulting coupling of… ▽ More Capillarity-driven transport in nanoporous solids is widespread in nature and crucial for modern liquid-infused engineering materials. During imbibition, curved menisci driven by high negative Laplace pressures exert an enormous contractile load on the porous matrix. Due to the challenge of simultaneously monitoring imbibition and deformation with high spatial resolution, the resulting coupling of solid elasticity to liquid capillarity has remained largely unexplored. Here, we study water imbibition in mesoporous silica using optical imaging, gravimetry, and high-resolution dilatometry. In contrast to an expected Laplace pressure-induced contraction, we find a square-root-of-time expansion and an additional abrupt length increase when the menisci reach the top surface. The final expansion is absent when we stop the imbibition front inside the porous medium in a dynamic imbibition-evaporation equilibrium, as is typical for transpiration-driven hydraulic transport in plants, especially in trees. These peculiar deformation behaviors are validated by single-nanopore molecular dynamics simulations and described by a continuum model that highlights the importance of expansive surface stresses at the pore walls (Bangham effect) and the buildup or release of contractile Laplace pressures as menisci collectively advance, arrest, or disappear. Our model suggests that these observations apply to any imbibition process in nanopores, regardless of the liquid/solid combination, and that the Laplace contribution upon imbibition is precisely half that of vapor sorption, due to the linear pressure drop associated with viscous flow. Thus, simple deformation measurements can be used to quantify surface stresses and Laplace pressures or transport in a wide variety of natural and artificial porous media. △ Less

Submitted 16 September, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 11 pages, 4 figures. Supplementary information and 3 movies are stored as ancillary files

Journal ref: Proceedings of the National Academy of Sciences 121 (38) e2318386121 (2024)

Soft matter physics of the ground beneath our feet

Authors: Anne Voigtländer, Morgane Houssais, Karol A. Bacik, Ian C. Bourg, Justin C. Burton, Karen E. Daniels, Sujit S. Datta, Emanuela Del Gado, Nakul S. Deshpande, Olivier Devauchelle, Behrooz Ferdowsi, Rachel Glade, Lucas Goehring, Ian J. Hewitt, Douglas Jerolmack, Ruben Juanes, Arshad Kudrolli, Ching-Yao Lai, Wei Li, Claire Masteller, Kavinda Nissanka, Allan M. Rubin, Howard A. Stone, Jenny Suckale, Nathalie M. Vriend , et al. (2 additional authors not shown)

Abstract: Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment… ▽ More Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment is studied. △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: Perspective Paper, 30 pages, 15 figures

Anomalous crystalline ordering of particles in a viscoelastic fluid under high shear

Authors: Sijie Sun, Nan Xue, Stefano Aime, Hyoungsoo Kim, Jizhou Tang, Gareth H. McKinley, Howard A. Stone, David A. Weitz

Abstract: Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shea… ▽ More Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shear rates, the flow becomes unstable, even in the absence of particles. This instability makes it very difficult to determine the properties of a particle suspension. Here we use a fully immersed parallel plate geometry to measure the high-shear-rate behavior of a suspension of particles in a viscoelastic fluid. We find an unexpected separation of the particles within the suspension resulting in the formation of a layer of particles in the center of the cell. Remarkably, monodisperse particles form a crystalline layer which dramatically alters the shear instability. By combining measurements of the velocity field and torque fluctuations, we show that this solid layer disrupts the flow instability and introduces a new, single-frequency component to the torque fluctuations that reflects a dominant velocity pattern in the flow. These results highlight the interplay between particles and a suspending viscoelastic fluid at very high shear rates. △ Less

Submitted 26 June, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

Comments: SI Videos and future data sharing are available at https://doi.org/10.7910/DVN/K0XZ6N

Transport of a passive scalar in wide channels with surface topography

Authors: James V. Roggeveen, Howard A. Stone, Christina Kurzthaler

Abstract: We generalize classical dispersion theory for a passive scalar to derive an asymptotic long-time convection-diffusion equation for a solute suspended in a wide, structured channel and subject to a steady low-Reynolds-number shear flow. Our theory, valid for small roughness amplitudes of the channel, holds for general surface shapes expandable as a Fourier series. We determine an anisotropic disper… ▽ More We generalize classical dispersion theory for a passive scalar to derive an asymptotic long-time convection-diffusion equation for a solute suspended in a wide, structured channel and subject to a steady low-Reynolds-number shear flow. Our theory, valid for small roughness amplitudes of the channel, holds for general surface shapes expandable as a Fourier series. We determine an anisotropic dispersion tensor, which depends on the characteristic wavelengths and amplitude of the surface structure. For surfaces whose corrugations are tilted with respect to the applied flow direction, we find that dispersion along the principal direction (i.e., the principal eigenvector of the dispersion tensor) is at an angle to the main flow direction and becomes enhanced relative to classical Taylor dispersion. In contrast, dispersion perpendicular to it can decrease compared to the short-time diffusivity of the particles. Furthermore, for an arbitrary surface shape represented in terms of a Fourier decomposition, we find that each Fourier mode contributes at leading order a linearly-independent correction to the classical Taylor dispersion tensor. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Comments: under consideration for publication in the Journal of Physics: Condensed Matter (JPCM)

Diffusiophoresis in the presence of a pH gradient

Authors: Suin Shim, Janine K. Nunes, Guang Chen, Howard A. Stone

Abstract: Diffusiophoresis is the spontaneous motion of particles under gradients of solutes. In electrolyte-driven diffusiophoresis, the zeta potential of the particles is an important surface property that characterizes diffusiophoretic mobility. However, the zeta potential is not a fixed material property and colloidal surfaces often show varying potentials depending on the physical chemistry of the surr… ▽ More Diffusiophoresis is the spontaneous motion of particles under gradients of solutes. In electrolyte-driven diffusiophoresis, the zeta potential of the particles is an important surface property that characterizes diffusiophoretic mobility. However, the zeta potential is not a fixed material property and colloidal surfaces often show varying potentials depending on the physical chemistry of the surrounding fluid, e.g., solute type, ionic strength, and pH. In this article, we study experimentally and theoretically pH-dependent diffusiophoresis of polystyrene particles using a dead-end pore geometry. In particular, the influence of the isoelectric point (pI) on diffusiophoresis is demonstrated in the absence and presence of wall diffusioosmosis. Throughout the paper, we show with experiments and model calculations how the pH-dependent diffusiophoresis and diffusioosmosis influence the particle motion in dead-end pore configurations, including changes that occur when there is a sign change in the zeta potential near the pI. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Microswimmers near corrugated, periodic surfaces

Authors: Christina Kurzthaler, Howard A. Stone

Abstract: We explore hydrodynamic interactions between microswimmers and corrugated, or rough, surfaces, as found often in biological systems and microfluidic devices. Using the Lorentz reciprocal theorem for viscous flows we derive exact expressions for the roughness-induced velocities up to first order in the surface-height fluctuations and provide solutions for the translational and angular velocities va… ▽ More We explore hydrodynamic interactions between microswimmers and corrugated, or rough, surfaces, as found often in biological systems and microfluidic devices. Using the Lorentz reciprocal theorem for viscous flows we derive exact expressions for the roughness-induced velocities up to first order in the surface-height fluctuations and provide solutions for the translational and angular velocities valid for arbitrary surface shapes. We apply our theoretical predictions to elucidate the impact of a periodic, wavy surface on the velocities of microswimmers modeled in terms of a superposition of Stokes singularities. Our findings, valid in the framework of a far-field analysis, show that the roughness-induced velocities vary non-monotonically with the wavelength of the surface. For wavelengths comparable to the swimmer-surface distance a pusher can experience a repulsive contribution due to the reflection of flow fields at the edge of a surface cavity, which decreases the overall attraction to the wall. △ Less

Submitted 9 August, 2022; originally announced August 2022.

Journal ref: Soft Matter, 2021, 17, 3322-3332

Perspectives on viscoelastic flow instabilities and elastic turbulence

Authors: Sujit S. Datta, Arezoo M. Ardekani, Paulo E. Arratia, Antony N. Beris, Irmgard Bischofberger, Jens G. Eggers, J. Esteban López-Aguilar, Suzanne M. Fielding, Anna Frishman, Michael D. Graham, Jeffrey S. Guasto, Simon J. Haward, Sarah Hormozi, Gareth H. McKinley, Robert J. Poole, Alexander Morozov, V. Shankar, Eric S. G. Shaqfeh, Amy Q. Shen, Holger Stark, Victor Steinberg, Ganesh Subramanian, Howard A. Stone

Abstract: Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h… ▽ More Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Comments: A perspective article based on a virtual workshop of the Princeton Center for Theoretical Sciences that took place in January 2021

A Geometric Criterion for the Optimal Spreading of Active Polymers in Porous Media

Authors: Christina Kurzthaler, Suvendu Mandal, Tapomoy Bhattacharjee, Hartmut Löwen, Sujit S. Datta, Howard A. Stone

Abstract: We perform Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimic bacterial swimming, in porous media. In accord with recent experiments of \emph{Escherichia coli}, the polymer dynamics are characterized by trapping phases interrupted by directed hopping motion through the pores. We find that the effective translational diffusivities of run-reverse age… ▽ More We perform Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimic bacterial swimming, in porous media. In accord with recent experiments of \emph{Escherichia coli}, the polymer dynamics are characterized by trapping phases interrupted by directed hopping motion through the pores. We find that the effective translational diffusivities of run-reverse agents can be enhanced up to two orders in magnitude, compared to their non-reversing counterparts, and exhibit a non-monotonic behavior as a function of the reversal rate, which we rationalize using a coarse-grained model. Furthermore, we discover a geometric criterion for the optimal spreading, which emerges when their run lengths are comparable to the longest straight path available in the porous medium. More significantly, our criterion unifies results for porous media with disparate pore sizes and shapes and thus provides a fundamental principle for optimal transport of microorganisms and cargo-carriers in densely-packed biological and environmental settings. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Low-Reynolds-number, bi-flagellated Quincke swimmers with multiple forms of motion

Authors: Endao Han, Lailai Zhu, Joshua W. Shaevitz, Howard A. Stone

Abstract: In the limit of zero Reynolds number (Re), swimmers propel themselves exploiting a series of non-reciprocal body motions. For an artificial swimmer, a proper selection of the power source is required to drive its motion, in cooperation with its geometric and mechanical properties. Although various external fields (magnetic, acoustic, optical, etc.) have been introduced, electric fields are rarely… ▽ More In the limit of zero Reynolds number (Re), swimmers propel themselves exploiting a series of non-reciprocal body motions. For an artificial swimmer, a proper selection of the power source is required to drive its motion, in cooperation with its geometric and mechanical properties. Although various external fields (magnetic, acoustic, optical, etc.) have been introduced, electric fields are rarely utilized to actuate such swimmers experimentally in unbounded space. Here we use uniform and static electric fields to demonstrate locomotion of a bi-flagellated sphere at low Re via Quincke rotation. These Quincke swimmers exhibit three different forms of motion, including a self-oscillatory state due to elasto-electro-hydrodynamic interactions. Each form of motion follows a distinct trajectory in space. Our experiments and numerical results demonstrate a new method to generate, and potentially control, the locomotion of artificial flagellated swimmers. △ Less

Submitted 9 May, 2021; originally announced May 2021.

Comments: 19 pages, 13 figures

Forced Imbibition in Stratified Porous Media

Authors: Nancy B. Lu, Amir A. Pahlavan, Christopher A. Browne, Daniel B. Amchin, Howard A. Stone, Sujit S. Datta

Abstract: Imbibition plays a central role in diverse energy, environmental, and industrial processes. In many cases, the medium has multiple parallel strata of different permeabilities; however, how this stratification impacts imbibition is poorly understood. We address this gap in knowledge by directly visualizing forced imbibition in three-dimensional (3D) porous media with two parallel strata. We find th… ▽ More Imbibition plays a central role in diverse energy, environmental, and industrial processes. In many cases, the medium has multiple parallel strata of different permeabilities; however, how this stratification impacts imbibition is poorly understood. We address this gap in knowledge by directly visualizing forced imbibition in three-dimensional (3D) porous media with two parallel strata. We find that imbibition is spatially heterogeneous: for small capillary number Ca, the wetting fluid preferentially invades the fine stratum, while for Ca above a threshold value, the fluid instead preferentially invades the coarse stratum. This threshold value depends on the medium geometry, the fluid properties, and the presence of residual wetting films in the pore space. These findings are well described by a linear stability analysis that incorporates crossflow between the strata. Thus, our work provides quantitative guidelines for predicting and controlling flow in stratified porous media. △ Less

Submitted 5 October, 2020; originally announced October 2020.

Comments: In press

Journal ref: Phys. Rev. Applied 14, 054009 (2020)

CO$_2$-driven diffusiophoresis for removal of bacteria

Authors: Suin Shim, Sepideh Khodaparast, Ching-Yao Lai, Jing Yan, Jesse T. Ault, Bhargav Rallabandi, Orest Shardt, Howard A. Stone

Abstract: We investigate CO$_2$-driven diffusiophoresis of colloidal particles and bacterial cells in a Hele-Shaw geometry. Combining experiments and a model, we understand the characteristic length and time scales of CO$_2$-driven diffusiophoresis in relation to system dimensions and CO$_2$ diffusivity. Directional migration of wild-type V. cholerae and a mutant lacking flagella, as well as S. aureus and P… ▽ More We investigate CO$_2$-driven diffusiophoresis of colloidal particles and bacterial cells in a Hele-Shaw geometry. Combining experiments and a model, we understand the characteristic length and time scales of CO$_2$-driven diffusiophoresis in relation to system dimensions and CO$_2$ diffusivity. Directional migration of wild-type V. cholerae and a mutant lacking flagella, as well as S. aureus and P. aeruginosa, near a dissolving CO$_2$ source shows that diffusiophoresis of bacteria is achieved independent of cell shape and Gram stain. Long-time experiments suggest possible applications for bacterial diffusiophoresis to cleaning systems or anti-biofouling surfaces. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Particle motion nearby rough surfaces

Authors: Christina Kurzthaler, Lailai Zhu, Amir A. Pahlavan, Howard A. Stone

Abstract: We study the hydrodynamic coupling between particles and solid, rough boundaries characterized by random surface textures. Using the Lorentz reciprocal theorem, we derive analytical expressions for the grand mobility tensor of a spherical particle and find that roughness-induced velocities vary nonmonotonically with the characteristic wavelength of the surface. In contrast to sedimentation near a… ▽ More We study the hydrodynamic coupling between particles and solid, rough boundaries characterized by random surface textures. Using the Lorentz reciprocal theorem, we derive analytical expressions for the grand mobility tensor of a spherical particle and find that roughness-induced velocities vary nonmonotonically with the characteristic wavelength of the surface. In contrast to sedimentation near a planar wall, our theory predicts continuous particle translation transverse and perpendicular to the applied force. Most prominently, this motion manifests itself in a variance of particle displacements that grows quadratically in time along the direction of the force. This increase is rationalized by surface roughness generating particle sedimentation closer to or farther from the surface, which entails a significant variability of settling velocities. △ Less

Submitted 26 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. Fluids 5, 082101(R) (2020)

Buoyancy and capillary effects on floating liquid lenses

Authors: P. D. Ravazzoli, A. G. González, J. A. Diez, H. A. Stone

Abstract: We study the equilibrium shape of a liquid drop resting on top of a liquid surface, i.e., a floating lens. We consider the surface tension forces in non--wetting situations (negative spreading factor), as well as the effects of gravity. We obtain analytical expressions for the drop shape when gravity can be neglected. Perhaps surprisingly, when including gravity in the analysis, we find two differ… ▽ More We study the equilibrium shape of a liquid drop resting on top of a liquid surface, i.e., a floating lens. We consider the surface tension forces in non--wetting situations (negative spreading factor), as well as the effects of gravity. We obtain analytical expressions for the drop shape when gravity can be neglected. Perhaps surprisingly, when including gravity in the analysis, we find two different families of equilibrium solutions for the same set of physical parameters. These solutions correspond to drops whose center of mass is above or below the level of the external liquid surface. By means of energetic considerations we determine the family that has the smallest energy, and therefore is the most probable to be found in nature. A detailed explanation of the geometrical differences between the both types of solutions is provided. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 15 pages, 14 figures

Journal ref: Phys. Rev. Fluids 5, 073604 (2020)

A hydrodynamic instability drives protein droplet formation on microtubules to nucleate branches

Authors: Sagar U. Setru, Bernardo Gouveia, Raymundo Alfaro-Aco, Joshua W. Shaevitz, Howard A. Stone, Sabine Petry

Abstract: Liquid-liquid phase separation occurs not only in bulk liquid, but also on surfaces. In physiology, the nature and function of condensates on cellular structures remain unexplored. Here, we study how the condensed protein TPX2 behaves on microtubules to initiate branching microtubule nucleation, which is critical for spindle assembly in eukaryotic cells. Using fluorescence, electron, and atomic fo… ▽ More Liquid-liquid phase separation occurs not only in bulk liquid, but also on surfaces. In physiology, the nature and function of condensates on cellular structures remain unexplored. Here, we study how the condensed protein TPX2 behaves on microtubules to initiate branching microtubule nucleation, which is critical for spindle assembly in eukaryotic cells. Using fluorescence, electron, and atomic force microscopies and hydrodynamic theory, we show that TPX2 on a microtubule reorganizes according to the Rayleigh-Plateau instability, like dew droplets patterning a spider web. After uniformly coating microtubules, TPX2 forms regularly spaced droplets from which branches nucleate. Droplet spacing increases with greater TPX2 concentration. A stochastic model shows that droplets make branching nucleation more efficient by confining the space along the microtubule where multiple necessary factors colocalize to nucleate a branch. △ Less

Submitted 3 September, 2020; v1 submitted 17 January, 2020; originally announced January 2020.

Comments: 45 pages, 9 figures

Symmetrization of Thin Free-Standing Liquid Films via Capillary-Driven Flow

Authors: Vincent Bertin, John Niven, Howard A. Stone, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which ac… ▽ More We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which accounts for both the vertical and lateral flows, and which highlights the symmetry in the system. The symmetrization time is found to depend on the membrane thickness, surface tension, and viscosity. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Lett. 124, 184502 (2020)

Non-uniform growth and surface friction determine bacterial biofilm morphology on soft substrates

Authors: Chenyi Fei, Sheng Mao, Jing Yan, Ricard Alert, Howard A. Stone, Bonnie L. Bassler, Ned S. Wingreen, Andrej Kosmrlj

Abstract: During development, organisms acquire three-dimensional shapes with important physiological consequences. While the basic mechanisms underlying morphogenesis are known in eukaryotes, it is often difficult to manipulate them in vivo. To circumvent this issue, here we present a study of developing Vibrio cholerae biofilms grown on agar substrates in which the spatiotemporal morphological patterns we… ▽ More During development, organisms acquire three-dimensional shapes with important physiological consequences. While the basic mechanisms underlying morphogenesis are known in eukaryotes, it is often difficult to manipulate them in vivo. To circumvent this issue, here we present a study of developing Vibrio cholerae biofilms grown on agar substrates in which the spatiotemporal morphological patterns were altered by varying the agar concentration. Expanding biofilms are initially flat, but later experience a mechanical instability and become wrinkled. Whereas the peripheral region develops ordered radial stripes, the central region acquires a zigzag herringbone-like wrinkle pattern. Depending on the agar concentration, the wrinkles initially appear either in the peripheral region and propagate inward (low agar concentration) or in the central region and propagate outward (high agar concentration). To understand these experimental observations, we developed a model that considers diffusion of nutrients and their uptake by bacteria, bacterial growth/biofilm matrix production, mechanical deformation of both the biofilm and the agar, and the friction between them. Our model demonstrates that depletion of nutrients beneath the central region of the biofilm results in radially-dependent growth profiles, which in turn, produce anisotropic stresses that dictate the morphology of wrinkles. Furthermore, we predict that increasing surface friction (agar concentration) reduces stress anisotropy and shifts the location of the maximum compressive stress, where the wrinkling instability first occurs, toward the center of the biofilm, in agreement with our experimental observations. Our results are broadly applicable to bacterial biofilms with similar morphologies and also provide insight into how other bacterial biofilms form distinct wrinkle patterns. △ Less

Submitted 31 October, 2019; originally announced October 2019.

Comments: 16 pages, 4 figures + supplementary information (36 pages, 14 figures)

Journal ref: PNAS 117 (14), 7622-7632 (2020)

Harnessing elasticity to generate self-oscillation via an electrohydrodynamic instability

Authors: Lailai Zhu, Howard A. Stone

Abstract: Under a steady DC electric field of sufficient strength, a weakly conducting dielectric sphere in a dielectric solvent with higher conductivity can undergo spontaneous spinning (Quincke rotation) through a pitchfork bifurcation. We design an object composed of a dielectric sphere and an elastic filament. By solving an elasto-electro-hydrodynamic (EEH) problem numerically, we uncover an EEH instabi… ▽ More Under a steady DC electric field of sufficient strength, a weakly conducting dielectric sphere in a dielectric solvent with higher conductivity can undergo spontaneous spinning (Quincke rotation) through a pitchfork bifurcation. We design an object composed of a dielectric sphere and an elastic filament. By solving an elasto-electro-hydrodynamic (EEH) problem numerically, we uncover an EEH instability exhibiting diverse dynamic responses. Varying the bending stiffness of the filament, the composite object displays three behaviours: a stationary state, undulatory swimming and steady spinning, where the swimming results from a self-oscillatory instability through a Hopf bifurcation. By conducting a linear stability analysis incorporating an elastohydrodynamic model, we theoretically predict the growth rates and critical conditions, which agree well with the numerical counterparts. We also propose a reduced model system consisting of a minimal elastic structure which reproduces the EEH instability. The elasto-viscous response of the composite structure is able to transform the pitchfork bifurcation into a Hopf bifurcation, leading to self-oscillation. Our results imply a new way of harnessing elastic media to engineer self-oscillations, and more generally, to manipulate and diversify the bifurcations and the corresponding instabilities. These ideas will be useful in designing soft, environmentally adaptive machines. △ Less

Submitted 12 March, 2020; v1 submitted 7 June, 2019; originally announced June 2019.

Journal ref: Journal of Fluid Mechanics, 888, A31 (2020)

Propulsion driven by self-oscillation via an electrohydrodynamic instability

Authors: Lailai Zhu, Howard A. Stone

Abstract: Oscillations of flagella and cilia play an important role in biology, which motivates the idea of functional mimicry as part of bio-inspired applications. Nevertheless, it still remains challenging to drive their artificial counterparts to oscillate via a steady, homogeneous stimulus. Combining theory and simulations, we demonstrate a strategy to achieve this goal by using an elasto-electro-hydrod… ▽ More Oscillations of flagella and cilia play an important role in biology, which motivates the idea of functional mimicry as part of bio-inspired applications. Nevertheless, it still remains challenging to drive their artificial counterparts to oscillate via a steady, homogeneous stimulus. Combining theory and simulations, we demonstrate a strategy to achieve this goal by using an elasto-electro-hydrodynamic instability. In particular, we show that applying a uniform DC electric field can produce self-oscillatory motion of a microrobot composed of a dielectric particle and an elastic filament. Upon tuning the electric field and filament elasticity, the microrobot exhibits three distinct behaviors: a stationary state, undulatory swimming and steady spinning, where the swimming behavior stems from an instability emerging through a Hopf bifurcation. Our results imply the feasibility of engineering self-oscillations by leveraging the elasto-viscous response to control the type of bifurcation and the form of instability. We anticipate that our strategy will be useful in a broad range of applications imitating self-oscillatory natural phenomena and biological processes. △ Less

Submitted 4 June, 2019; originally announced June 2019.

Flexible fibers in shear flow approach attracting periodic solutions

Authors: A. M. Slowicka, H. A. Stone, M. L. Ekiel-Jezewska

Abstract: The three-dimensional dynamics of a single non-Brownian flexible fiber in shear flow is evaluated numerically, in the absence of inertia. A wide range of ratios A of bending to hydrodynamic forces and hundreds of initial configurations are considered. We demonstrate that flexible fibers in shear flow exhibit much more complicated evolution patterns than in the case of extensional flow, where trans… ▽ More The three-dimensional dynamics of a single non-Brownian flexible fiber in shear flow is evaluated numerically, in the absence of inertia. A wide range of ratios A of bending to hydrodynamic forces and hundreds of initial configurations are considered. We demonstrate that flexible fibers in shear flow exhibit much more complicated evolution patterns than in the case of extensional flow, where transitions to higher-order modes of characteristic shapes are observed when A exceeds consecutive threshold values. In shear flow, we identify the existence of an attracting steady configuration and different attracting periodic motions that are approached by long-lasting rolling, tumbling and meandering dynamical modes, respectively. We demonstrate that the final stages of the first and second modes are effective Jeffery orbits, with the constant parameter C replaced by an exponential function that either decays or increases in time, respectively, corresponding to a systematic drift of the trajectories. In the limit of C going to zero, the fiber aligns with the vorticity direction and in the limit of C going to infinity, the fiber periodically tumbles within the shear plane. For moderate values of A, a three-dimensional meandering periodic motion exists, which corresponds to intermediate values of C. Transient, close to periodic oscillations are also detected in the first stages of the modes. △ Less

Submitted 9 November, 2019; v1 submitted 30 May, 2019; originally announced May 2019.

Comments: 15 pages, 17 figures, 3 movies available online

Journal ref: Phys. Rev. E 101, 023104 (2020)

Representative subsampling of sedimenting blood

Authors: Bhargav Rallabandi, Janine K. Nunes, Antonio Perazzo, Segey Gershtein, Howard A. Stone

Abstract: It is often necessary to extract a small amount of a suspension, such as blood, from a larger sample of the same material for the purposes of diagnostics, testing or imaging. A practical challenge is that blood sediments noticeably on the time scale of a few minutes, making a representative subsampling of the original sample challenging. Guided by experimental data, we develop a Kynch sedimentatio… ▽ More It is often necessary to extract a small amount of a suspension, such as blood, from a larger sample of the same material for the purposes of diagnostics, testing or imaging. A practical challenge is that blood sediments noticeably on the time scale of a few minutes, making a representative subsampling of the original sample challenging. Guided by experimental data, we develop a Kynch sedimentation model to discuss design considerations that ensure a representative subsampling of blood for the entire range of physiologically relevant hematocrit over a specified time of interest. Additionally, we show that this design may be modified to exploit the sedimentation and subsample either higher or lower hematocrit relative to that of the original sample. Thus, our method provides a simple tool to either concentrate or dilute small quantities of blood or other sedimenting suspensions. △ Less

Submitted 26 February, 2019; originally announced February 2019.

Non-Fickian macroscopic model of axial diffusion of granular materials in a long cylindrical tumbler

Authors: Ivan C. Christov, Howard A. Stone

Abstract: We provide new concepts for understanding transport phenomena in flows of granular materials by using a non-Fickian macroscopic model of axial diffusion of a granular material in a finite cylindrical tumbler. The model accounts for diffusion induced by particle collisions only in a thin surface flowing layer due to localization of shear within the cross-section of the drum. All model parameters ar… ▽ More We provide new concepts for understanding transport phenomena in flows of granular materials by using a non-Fickian macroscopic model of axial diffusion of a granular material in a finite cylindrical tumbler. The model accounts for diffusion induced by particle collisions only in a thin surface flowing layer due to localization of shear within the cross-section of the drum. All model parameters are related to measurable quantities in a granular flow. It is shown that the proposed model is a member of the general class of linear constitutive relations with memory. An exact solution for the spreading of a finite-width pulse initial condition under the proposed non-Fickian model is derived and compared to the solution of a Fickian model (i.e., the ``classical'' diffusion equation). △ Less

Submitted 3 April, 2023; v1 submitted 29 January, 2019; originally announced February 2019.

Comments: 8 pages, 3 figures; v3: updates and filled in some details; v4: published in a Mechanics Research Communications Special Issue in Memory of Prof. Denis L. Blackmore

Journal ref: Mechanics Research Communications 129 (2023) 104100

Motion of hydrodynamically interacting active particles

Authors: Bhargav Rallabandi, Fan Yang, Howard A. Stone

Abstract: We develop a general hydrodynamic theory describing a system of interacting actively propelling particles of arbitrary shape suspended in a viscous fluid. We model the active part of the particle motion using a slip velocity prescribed on the otherwise rigid particle surfaces. We introduce the general framework for particle rotations and translations by applying the Lorentz reciprocal theorem for… ▽ More We develop a general hydrodynamic theory describing a system of interacting actively propelling particles of arbitrary shape suspended in a viscous fluid. We model the active part of the particle motion using a slip velocity prescribed on the otherwise rigid particle surfaces. We introduce the general framework for particle rotations and translations by applying the Lorentz reciprocal theorem for a collection of mobile particles with arbitrary surface slip. We then develop an approximate theory applicable to widely separated spheres, including hydrodynamic interactions up to the level of force quadrupoles. We apply our theory to a general example involving a prescribed slip velocity, and a specific case concerning the autonomous motion of chemically active particles moving by diffusiophoresis due to self-generated chemical gradients. △ Less

Submitted 8 January, 2019; originally announced January 2019.

Comments: 12 pages, 2 figures

Uniform coating of self-assembled non-iridescent colloidal nanostructures using Marangoni effects and polymers

Authors: Seung Yeol Lee, Hyoungsoo Kim, Shin-Hyun Kim, Howard A. Stone

Abstract: Colloidal crystals exhibit structural color without any color pigment due to the crystals' periodic nanostructure, which can interfere with visible light. This crystal structure is iridescent as the resulting color changes with the viewing or illumination angle, which limits its use for printing or displays. To eliminate the iridescent property, it is important to make the packing of the colloidal… ▽ More Colloidal crystals exhibit structural color without any color pigment due to the crystals' periodic nanostructure, which can interfere with visible light. This crystal structure is iridescent as the resulting color changes with the viewing or illumination angle, which limits its use for printing or displays. To eliminate the iridescent property, it is important to make the packing of the colloidal nanoparticles disordered. Here, we introduce a drop-casting method where a droplet of a water- ethanol mixture containing monodisperse polymer-coated silica nanoparticles creates a relatively uniform and non-iridescent deposit after the droplet evaporates completely on a heated substrate. The uniformity is caused by a thermal Marangoni flow and fast evaporation effects due to the heated substrate, whereas non-iridescence is the outcome of short-range-ordered packing of nanoparticles by depletion attraction and friction effects produced by polymer brushes. We show that the colors of the final deposits from individual droplets remain unchanged while the viewing angle is varied under ambient light. We expect that the coating method is compatible with ink-jet printing and the uniformly coated self-assembled non-iridescent nanostructures have potential for color displays using reflection mode and other optical devices. △ Less

Submitted 9 October, 2018; originally announced October 2018.

Comments: Accepted in Physical Review Applied (2018)

Surfing its own wave: hydroelasticity of a particle near a membrane

Authors: Bhargav Rallabandi, Naomi Oppenheimer, Matan Yah Ben Zion, Howard A. Stone

Abstract: We show using theory and experiments that a small particle moving along an elastic membrane through a viscous fluid is repelled from the membrane due to hydro-elastic forces. The viscous stress field produces an elastic disturbance leading to particle-wave coupling. We derive an analytic expression for the particle trajectory in the lubrication limit, bypassing the construction of the detailed vel… ▽ More We show using theory and experiments that a small particle moving along an elastic membrane through a viscous fluid is repelled from the membrane due to hydro-elastic forces. The viscous stress field produces an elastic disturbance leading to particle-wave coupling. We derive an analytic expression for the particle trajectory in the lubrication limit, bypassing the construction of the detailed velocity and pressure fields. The normal force is quadratic in the parallel speed, and is a function of the tension and bending resistance of the membrane. Experimentally, we measure the normal displacement of spheres sedimenting along an elastic membrane and find quantitative agreement with the theoretical predictions with no fitting parameters. We experimentally demonstrate the effect to be strong enough for particle separation and sorting. We discuss the significance of these results for bio-membranes and propose our model for membrane elasticity measurements. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 4 pages, 5 figures

Verticalization of bacterial biofilms

Authors: Farzan Beroz, Jing Yan, Yigal Meir, Benedikt Sabass, Howard A. Stone, Bonnie L. Bassler, Ned S. Wingreen

Abstract: Biofilms are communities of bacteria adhered to surfaces. Recently, biofilms of rod-shaped bacteria were observed at single-cell resolution and shown to develop from a disordered, two-dimensional layer of founder cells into a three-dimensional structure with a vertically-aligned core. Here, we elucidate the physical mechanism underpinning this transition using a combination of agent-based and cont… ▽ More Biofilms are communities of bacteria adhered to surfaces. Recently, biofilms of rod-shaped bacteria were observed at single-cell resolution and shown to develop from a disordered, two-dimensional layer of founder cells into a three-dimensional structure with a vertically-aligned core. Here, we elucidate the physical mechanism underpinning this transition using a combination of agent-based and continuum modeling. We find that verticalization proceeds through a series of localized mechanical instabilities on the cellular scale. For short cells, these instabilities are primarily triggered by cell division, whereas long cells are more likely to be peeled off the surface by nearby vertical cells, creating an "inverse domino effect". The interplay between cell growth and cell verticalization gives rise to an exotic mechanical state in which the effective surface pressure becomes constant throughout the growing core of the biofilm surface layer. This dynamical isobaricity determines the expansion speed of a biofilm cluster and thereby governs how cells access the third dimension. In particular, theory predicts that a longer average cell length yields more rapidly expanding, flatter biofilms. We experimentally show that such changes in biofilm development occur by exploiting chemicals that modulate cell length. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: Main text 10 pages, 4 figures; Supplementary Information 35 pages, 15 figures

Flow rate--pressure drop relation for deformable shallow microfluidic channels

Authors: Ivan C. Christov, Vincent Cognet, Tanmay C. Shidhore, Howard A. Stone

Abstract: Laminar flow in devices fabricated from soft materials causes deformation of the passage geometry, which affects the flow rate--pressure drop relation. For a given pressure drop, in channels with narrow rectangular cross-section, the flow rate varies as the cube of the channel height, so deformation can produce significant quantitative effects, including nonlinear dependence on the pressure drop [… ▽ More Laminar flow in devices fabricated from soft materials causes deformation of the passage geometry, which affects the flow rate--pressure drop relation. For a given pressure drop, in channels with narrow rectangular cross-section, the flow rate varies as the cube of the channel height, so deformation can produce significant quantitative effects, including nonlinear dependence on the pressure drop [{Gervais, T., El-Ali, J., Günther, A. \& Jensen, K.\ F.}\ 2006 Flow-induced deformation of shallow microfluidic channels.\ \textit{Lab Chip} \textbf{6}, 500--507]. Gervais et. al. proposed a successful model of the deformation-induced change in the flow rate by heuristically coupling a Hookean elastic response with the lubrication approximation for Stokes flow. However, their model contains a fitting parameter that must be found for each channel shape by performing an experiment. We present a perturbation approach for the flow rate--pressure drop relation in a shallow deformable microchannel using the theory of isotropic quasi-static plate bending and the Stokes equations under a lubrication approximation (specifically, the ratio of the channel's height to its width and of the channel's height to its length are both assumed small). Our result contains no free parameters and confirms Gervais et. al.'s observation that the flow rate is a quartic polynomial of the pressure drop. The derived flow rate--pressure drop relation compares favorably with experimental measurements. △ Less

Submitted 3 January, 2018; v1 submitted 7 December, 2017; originally announced December 2017.

Comments: 20 pages, 6 figures; v2 minor revisions, accepted for publication in the Journal of Fluid Mechanics

Journal ref: J. Fluid Mech. vol. 841, 2018, pp. 267-286

Water-based peeling of thin hydrophobic films

Authors: Sepideh Khodaparast, François Boulogne, Christophe Poulard, Howard A. Stone

Abstract: Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered… ▽ More Inks of permanent markers and water-proof cosmetics create elastic thin films upon application on a surface. Such adhesive materials are deliberately designed to exhibit water-repellent behavior. Therefore, patterns made up of these inks become resistant to moisture and cannot be cleaned by water after drying. However, we show that sufficiently slow dipping of such elastic films, which are adhered to a substrate, into a bath of pure water allows complete removal of the hydrophobic coatings. Upon dipping, the air-water interface in the bath forms a contact line on the substrate, which exerts a capillary-induced peeling force at the edge of the hydrophobic thin film. We highlight that this capillary peeling process is more effective at lower velocities of the air-liquid interface and lower viscosities. Capillary peeling not only removes such thin films from the substrate but also transfers them flawlessly onto the air-water interface. △ Less

Submitted 1 September, 2017; originally announced September 2017.

Diffusiophoretic manipulation of particles in a drop deposited on a hydrogel

Authors: François Boulogne, Sangwoo Shin, Julien Dervaux, Laurent Limat, Howard A. Stone

Abstract: We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficu… ▽ More We report an experimental study on the manipulation of colloidal particles in a drop sitting on a hydrogel. The manipulation is achieved by diffusiophoresis, which describes a directed motion of particles induced by solute gradients. By letting the solute concentrations for the drop and the hydrogel be different, we control the motion of particles in a stable suspension, which is otherwise difficult to achieve. We show that diffusiophoresis can cause the particles to move either toward or away from the liquid-air interface depending on the direction of the solute gradient and the surface charge of the particles. We measure the particle adsorption experimentally and rationalize the results with a one-dimensional numerical model. We show that diffusiophoretic motion is significant at the lengthscale of a drop deposited on a hydrogel, which suggests a simple method for the deposition of particles on hydrogels. △ Less

Submitted 20 June, 2017; originally announced June 2017.

Shape of the Growing Front of Biofilms

Authors: Xin Wang, Howard A. Stone, Ramin Golestanian

Abstract: The spatial organization of bacteria in dense biofilms is key to their collective behaviour, and understanding it will be important for medical and technological applications. Here we study the morphology of a compact biofilm that undergoes unidirectional growth, and determine the condition for the stability of the growing interface as a function of the nutrient concentration and mechanical tensio… ▽ More The spatial organization of bacteria in dense biofilms is key to their collective behaviour, and understanding it will be important for medical and technological applications. Here we study the morphology of a compact biofilm that undergoes unidirectional growth, and determine the condition for the stability of the growing interface as a function of the nutrient concentration and mechanical tension. Our study suggests that transient behaviour may play an important role in shaping the structure of a biofilm. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Comments: 13 pages, 4 figures

Journal ref: New Journal of Physics 19.12 (2017): 125007

Protocol to perform pressurized blister tests on thin elastic films

Authors: François Boulogne, Sepideh Khodaparast, Christophe Poulard, Howard A. Stone

Abstract: This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred… ▽ More This work aims to identify common challenges in the preparation of the blister test devices designed for measurement of energy release rate for brittle thin films and to propose easy-to-implement solutions accordingly. To this end, we provide a step-by-step guide for fabricating a blister test device comprised of thin polystyrene films adhered to glass substrates. Thin films are first transferred from donor substrates to an air-water interface, which is then used as a platform to locate them on a receiver substrate. We embed a microchannel at the back of the device to evacuate the air trapped in the opening, through which the pressure is applied. We quantify the height and the radius of the blister to estimate the adhesion energy using the available expressions correlating the normal force and the moment with the shape of the blister. The present blister test provided adhesion energy per unit area of $G = 18 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ for polystyrene on glass, which is in good agreement with the measurement of $G = 14 \pm 2$ $ \mbox{mJ}/{\mbox m}^2$ found in our independent cleavage test. △ Less

Submitted 7 June, 2017; originally announced June 2017.

Spatial gene drives and pushed genetic waves

Authors: Hidenori Tanaka, Howard A. Stone, David R. Nelson

Abstract: Gene drives have the potential to rapidly replace a harmful wild-type allele with a gene drive allele engineered to have desired functionalities. However, an accidental or premature release of a gene drive construct to the natural environment could damage an ecosystem irreversibly. Thus, it is important to understand the spatiotemporal consequences of the super-Mendelian population genetics prior… ▽ More Gene drives have the potential to rapidly replace a harmful wild-type allele with a gene drive allele engineered to have desired functionalities. However, an accidental or premature release of a gene drive construct to the natural environment could damage an ecosystem irreversibly. Thus, it is important to understand the spatiotemporal consequences of the super-Mendelian population genetics prior to potential applications. Here, we employ a reaction-diffusion model for sexually reproducing diploid organisms to study how a locally introduced gene drive allele spreads to replace the wild-type allele, even though it possesses a selective disadvantage $s>0$. Using methods developed by N. Barton and collaborators, we show that socially responsible gene drives require $0.5<s<0.697$, a rather narrow range. In this "pushed wave" regime, the spatial spreading of gene drives will be initiated only when the initial frequency distribution is above a threshold profile called "critical propagule", which acts as a safeguard against accidental release. We also study how the spatial spread of the pushed wave can be stopped by making gene drives uniquely vulnerable ("sensitizing drive") in a way that is harmless for a wild-type allele. Finally, we show that appropriately sensitized drives in two dimensions can be stopped even by imperfect barriers perforated by a series of gaps. △ Less

Submitted 21 August, 2017; v1 submitted 11 April, 2017; originally announced April 2017.

Journal ref: PNAS, vol. 114 no. 32, 8452-8457 (2017)

Coffee-stain growth dynamics on dry and wet surfaces

Authors: François Boulogne, François Ingremeau, Howard A. Stone

Abstract: The drying of a drop containing particles often results in the accumulation of the particles at the contact line. In this work, we investigate the drying of an aqueous colloidal drop surrounded by a hydrogel that is also evaporating. We combine theoretical and experimental studies to understand how the surrounding vapor concentration affects the particle deposit during the constant radius evaporat… ▽ More The drying of a drop containing particles often results in the accumulation of the particles at the contact line. In this work, we investigate the drying of an aqueous colloidal drop surrounded by a hydrogel that is also evaporating. We combine theoretical and experimental studies to understand how the surrounding vapor concentration affects the particle deposit during the constant radius evaporation mode. In addition to the common case of evaporation on an otherwise dry surface, we show that in a configuration where liquid is evaporating from a flat surface around the drop, the singularity of the evaporative flux at the contact line is suppressed and the drop evaporation is homogeneous. For both conditions, we derive the velocity field and we establish the temporal evolution of the number of particles accumulated at the contact line. We predict the growth dynamics of the stain and the drying timescales. Thus, dry and wet conditions are compared with experimental results and we highlight that only the dynamics is modified by the evaporation conditions, not the final accumulation at the contact line. △ Less

Submitted 23 November, 2016; originally announced November 2016.

Drop morphologies on flexible fibers: influence of elastocapillary effects

Authors: Alban Sauret, Francois Boulogne, Katarzyna Somszor, Emilie Dressaire, Howard A. Stone

Abstract: Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liqu… ▽ More Various materials are made of long thin fibers that are randomly oriented to form a complex network in which drops of wetting liquid tend to accumulate at the nodes. The capillary force exerted by the liquid can bend flexible fibers, which in turn influences the morphology adopted by the liquid. In this paper, we investigate, the role of the fiber flexibility on the shape of a small volume of liquid on a pair of crossed flexible fibers, through a model situation. We characterize the liquid morphologies as we vary the volume of liquid, the angle between the fibers, and the length of the fibers. The drop morphologies previously reported for rigid crossed fibers, i.e., a drop, a column and a mixed morphology, are also observed on flexible crossed fibers with modified domains of existence. In addition, at small tilting angles between the fibers, a new behavior is observed: the fibers bend and collapse. Depending on the volume of liquid, a thin column with or without a drop is reported on the collapsed fibers. Our study suggests that the fiber flexibility adds a rich variety of behaviors that may be important for some applications. △ Less

Submitted 8 October, 2016; originally announced October 2016.

Effect of the polydispersity of a colloidal drop on the drying induced stress as measured by the buckling of a floating sheet

Authors: François Boulogne, Yong Lin Kong, Janine K. Nunes, Howard A. Stone

Abstract: We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decrease… ▽ More We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decreases the expected stress, which we interpret as the formation of lower hydrodynamic resistance paths in the porous material. As colloidal suspensions are usually polydisperse, we show for different average particle sizes that the stress is effectively dominated by the larger particles of the distribution and not by the average particle size. △ Less

Submitted 19 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. Lett. 116, 238001 (2016)

Tuning the receding contact angle on hydrogels by addition of particles

Authors: François Boulogne, François Ingremeau, Laurent Limat, Howard A. Stone

Abstract: Control of the swelling, chemical functionalization, and adhesivity of hydrogels are finding new applications in a wide range of material systems. We investigate experimentally the effect of adsorbed particles on hydrogels on the depinning of contact lines. In our experiments, a water drop containing polystyrene microspheres is deposited on a swelling hydrogel, which leads to the drop absorption a… ▽ More Control of the swelling, chemical functionalization, and adhesivity of hydrogels are finding new applications in a wide range of material systems. We investigate experimentally the effect of adsorbed particles on hydrogels on the depinning of contact lines. In our experiments, a water drop containing polystyrene microspheres is deposited on a swelling hydrogel, which leads to the drop absorption and particle deposition. Two regimes are observed: a decreasing drop height with a pinned contact line followed by a receding contact line. We show that increasing the particles concentration increases the duration of the first regime and significantly decreases the total absorption time. The adsorbed particles increase the pinning force at the contact line. Finally, we develop a method to measure the receding contact angle with the consideration of the hydrogel swelling. △ Less

Submitted 24 May, 2016; v1 submitted 17 May, 2016; originally announced May 2016.

Crossover from Shear-Driven to Thermally Activated Drainage of Liquid-Infused Microscale Capillaries

Authors: Carlos E. Colosqui, Jason S. Wexler, Ying Liu, Howard A. Stone

Abstract: The shear-driven drainage of capillary grooves filled with viscous liquid is a dynamic wetting phenomenon relevant to numerous industrial processes and novel lubricant-infused surfaces. Prior work has reported that a finite length $L_\infty$ of the capillary groove can remain indefinitely filled with liquid even when large shear stresses are applied. The mechanism preventing full drainage is attri… ▽ More The shear-driven drainage of capillary grooves filled with viscous liquid is a dynamic wetting phenomenon relevant to numerous industrial processes and novel lubricant-infused surfaces. Prior work has reported that a finite length $L_\infty$ of the capillary groove can remain indefinitely filled with liquid even when large shear stresses are applied. The mechanism preventing full drainage is attributed to a balance between the shear-driven flow and a counterflow driven by capillary pressures caused by deformation of the free surface. The final equilibrium length $L_\infty$ is uniquely determined by physical properties of the filling liquid as well as the geometry and wettability of the capillary. In this work, we examine closely the approach to the final equilibrium length $L_\infty$ and report a crossover to a slow drainage regime that cannot be described by conventional dynamic models considering solely hydrodynamic and capillary forces. The slow drainage regime observed in experiments can be instead modeled by a kinetic equation describing a sequence of random thermally activated transitions between multiple metastable states caused by surface defects with nanoscale dimensions. Our findings provide new insights on the critical role that natural or engineered surface roughness with nanoscale dimensions can play in the imbibition and drainage of capillaries and other dynamic wetting processes in microscale systems. △ Less

Submitted 11 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. Fluids 1, 064101 (2016)

Role of the membrane for mechanosensing by tethered channels

Authors: Benedikt Sabass, Howard A. Stone

Abstract: Biologically important membrane channels are gated by force at attached tethers. Here, we generically characterize the non-trivial interplay of force, membrane tension, and channel deformations that can affect gating. A central finding is that minute conical channel deformation under force leads to significant energy release during opening. We also calculate channel-channel interactions and show t… ▽ More Biologically important membrane channels are gated by force at attached tethers. Here, we generically characterize the non-trivial interplay of force, membrane tension, and channel deformations that can affect gating. A central finding is that minute conical channel deformation under force leads to significant energy release during opening. We also calculate channel-channel interactions and show that they can amplify force sensitivity of tethered channels. △ Less

Submitted 27 July, 2017; v1 submitted 17 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. Lett. 116, 258101 (2016)

Controlled uniform coating from the interplay of Marangoni flows and surface-adsorbed macromolecules

Authors: Hyoungsoo Kim, François Boulogne, Eujin Um, Ian Jacobi, Ernie Button, Howard A. Stone

Abstract: Surface coatings and patterning technologies are essential for various physicochemical applications. In this Letter, we describe key parameters to achieve uniform particle coatings from binary solutions: First, multiple sequential Marangoni flows, set by solute and surfactant simultaneously, prevent non-uniform particle distributions and continuously mix suspended materials during droplet evapor… ▽ More Surface coatings and patterning technologies are essential for various physicochemical applications. In this Letter, we describe key parameters to achieve uniform particle coatings from binary solutions: First, multiple sequential Marangoni flows, set by solute and surfactant simultaneously, prevent non-uniform particle distributions and continuously mix suspended materials during droplet evaporation. Second, we show the importance of particle-surface interactions that can be established by surface-adsorbed macromolecules. To achieve a uniform deposit in a binary mixture, a small concentration of surfactant and surface-adsorbed polymer (0.05 wt% each) is sufficient, which offers a new physicochemical avenue for control of coatings. △ Less

Submitted 22 March, 2016; v1 submitted 25 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. Lett. 116, 124501 (2016)

Capillary levelling of free-standing liquid nanofilms

Authors: Mark Ilton, Miles M. P. Couchman, Cedric Gerbelot, Michael Benzaquen, Paul D. Fowler, Howard A. Stone, Elie Raphaël, Kari Dalnoki-Veress, Thomas Salez

Abstract: We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe… ▽ More We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe for the rheology of liquids at interfaces in a configuration that avoids substrate effects. △ Less

Submitted 5 September, 2016; v1 submitted 17 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. Lett. 117, 167801 (2016)

Homogeneous deposition of particles by absorption on hydrogels

Authors: François Boulogne, François Ingremeau, Julien Dervaux, Laurent Limat, Howard A. Stone

Abstract: When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while m… ▽ More When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed such as flow modification by addition of surfactants or control of the interactions between the particles. All of these strategies involve the liquid phase while maintaining the drying process. However, substitution of evaporation by absorption into the substrate of the solvent has been investigated less. Here, we show that a droplet containing colloidal particles deposited on swelling hydrogels can lead to a nearly uniform coating. We report experiments and theory to explore the relation between the gel swelling, uniformity of deposition and the adsorption dynamics of the particles at the substrate. Our findings suggest that draining the solvent by absorption provides a robust route to homogeneous coatings. △ Less

Submitted 18 November, 2015; originally announced November 2015.