-
Capillary condensation under atomic-scale confinement
Authors:
Qian Yang,
P. Z. Sun,
L. Fumagalli,
Y. V. Stebunov,
S. J. Haigh,
Z. W. Zhou,
I. V. Grigorieva,
F. C. Wang,
A. K. Geim
Abstract:
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena a…
▽ More
Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Giant optical anisotropy in transition metal dichalcogenides for next-generation photonics
Authors:
G. A. Ermolaev,
D. V. Grudinin,
Y. V. Stebunov,
K. V. Voronin,
V. G. Kravets,
J. Duan,
A. B. Mazitov,
G. I. Tselikov,
A. Bylinkin,
D. I. Yakubovsky,
S. M. Novikov,
D. G. Baranov,
A. Y. Nikitin,
I. A. Kruglov,
T. Shegai,
P. Alonso-González,
A. N. Grigorenko,
A. V. Arsenin,
K. S. Novoselov,
V. S. Volkov
Abstract:
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspir…
▽ More
Large optical anisotropy observed in a broad spectral range is of paramount importance for efficient light manipulation in countless devices. Although a giant anisotropy was recently observed in the mid-infrared wavelength range, for visible and near-infrared spectral intervals, the problem remains acute with the highest reported birefringence values of 0.8 in BaTiS3 and h-BN crystals. This inspired an intensive search for giant optical anisotropy among natural and artificial materials. Here, we demonstrate that layered transition metal dichalcogenides (TMDCs) provide an answer to this quest owing to their fundamental differences between intralayer strong covalent bonding and weak interlayer van der Walls interaction. To do this, we carried out a correlative far- and near-field characterization validated by first-principle calculations that reveals an unprecedented birefringence of 1.5 in the infrared and 3 in the visible light for MoS2. Our findings demonstrate that this outstanding anisotropy allows for tackling the diffraction limit enabling an avenue for on-chip next-generation photonics.
△ Less
Submitted 11 January, 2021; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Limits on gas impermeability of graphene
Authors:
P. Z. Sun,
Q. Yang,
W. J. Kuang,
Y. V. Stebunov,
W. Q. Xiong,
J. Yu,
R. R. Nair,
M. I. Katsnelson,
S. J. Yuan,
I. V. Grigorieva,
M. Lozada-Hidalgo,
F. C. Wang,
A. K. Geim
Abstract:
Despite being only one-atom thick, defect-free graphene is considered to be completely impermeable to all gases and liquids. This conclusion is based on theory and supported by experiments that could not detect gas permeation through micrometre-size membranes within a detection limit of 10^5 to 10^6 atoms per second. Here, using small monocrystalline containers tightly sealed with graphene, we sho…
▽ More
Despite being only one-atom thick, defect-free graphene is considered to be completely impermeable to all gases and liquids. This conclusion is based on theory and supported by experiments that could not detect gas permeation through micrometre-size membranes within a detection limit of 10^5 to 10^6 atoms per second. Here, using small monocrystalline containers tightly sealed with graphene, we show that defect-free graphene is impermeable with an accuracy of eight to nine orders of magnitude higher than in the previous experiments. We could discern permeation of just a few helium atoms per hour, and this detection limit is also valid for all other tested gases (neon, nitrogen, oxygen, argon, krypton and xenon), except for hydrogen. Hydrogen shows noticeable permeation, even though its molecule is larger than helium and should experience a higher energy barrier. The puzzling observation is attributed to a two-stage process that involves dissociation of molecular hydrogen at catalytically active graphene ripples, followed by adsorbed atoms flipping to the other side of the graphene sheet with a relatively low activation energy of about 1.0 electronvolt, a value close to that previously reported for proton transport. Our work provides a key reference for the impermeability of two-dimensional materials and is important from a fundamental perspective and for their potential applications.
△ Less
Submitted 18 February, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Ultrathin and ultrasmooth gold films on monolayer MoS2
Authors:
Dmitry I. Yakubovsky,
Yury V. Stebunov,
Roman V. Kirtaev,
Georgy A. Ermolaev,
Mikhail S. Mironov,
Sergey M. Novikov,
Aleksey V. Arsenin,
Valentyn S. Volkov
Abstract:
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown…
▽ More
Sub-10 nm continuous metal films are promising candidates for flexible and transparent nanophotonics and optoelectronics applications. In this Letter, we demonstrate that monolayer MoS2 is a perspective adhesion layer for the deposition of continuous conductive gold films with a thickness of only 3-4 nm. Optical properties of continuous ultrathin gold films deposited on two-dimensional MoS2 grown by chemical vapor deposition are investigated by spectroscopic ellipsometry over a wide wavelength range (300-3300 nm). Results show that optical losses in ultrathin films increase with decreasing thickness due to the fine-grained structure and the presence of a small number of voids, however, they exhibit metallic properties down to a thickness of 3-4 nm. The atomic-scale MoS2 interfaces can be transferred to any substrate and thus open up new opportunities for the creation of metasurfaces and a new type of van der Waals heterostructures with atomically thin metal layers.
△ Less
Submitted 29 December, 2018;
originally announced December 2018.
