-
Coexistence of charge density wave and field-tuned magnetic states in TmNiC$_2$
Authors:
Kamil K. Kolincio,
Marta Roman,
Valerio Tammurello,
Simone Di Cataldo,
Daniel Matulka,
Sonia Francoual,
Berthold Stöger,
Herwig Michor
Abstract:
Exploring the relations between coexisting, cooperative, or competing types of ordering is a key to identify and harness the mechanisms governing the mutual interactions between them, and to utilize their combined properties. We have experimentally explored the response of the charge density wave (CDW) to various antiferromagnetic, metamagnetic, and field-aligned ferromagnetic states that constitu…
▽ More
Exploring the relations between coexisting, cooperative, or competing types of ordering is a key to identify and harness the mechanisms governing the mutual interactions between them, and to utilize their combined properties. We have experimentally explored the response of the charge density wave (CDW) to various antiferromagnetic, metamagnetic, and field-aligned ferromagnetic states that constitute the magnetic phase diagram of TmNiC$_2$. The high resolution x-ray diffraction experiment employing synchrotron radiation at low temperature and high magnetic field, allowed to follow the superstructure satellite reflections, being a sensitive probe of CDW. This investigation not only reveals direct evidence that the charge density wave avoids even a partial suppression in the antiferromagnetic ground state but also proves that this state coexists, without any visible signatures of weakening, in the entire dome of the magnetically ordered phases, including the field-aligned ferromagnetic state. The calculations of the electronic and phonon structures support the experiment, revealing that the dominant contribution to the CDW transition stems from momentum-dependent electron-phonon coupling. We conclude that this mechanism prevents the CDW from vanishing, although the nesting conditions within the magnetically ordered phases deteriorate.
△ Less
Submitted 15 May, 2025;
originally announced May 2025.
-
Competing charge density wave phases in YNiC2
Authors:
Marta Roman,
Simone Di Cataldo,
Berthold Stöger,
Lisa Reisinger,
Emilie Morineau,
Kamil K. Kolincio,
Herwig Michor
Abstract:
Charge density wave (CDW) orders in YNiC2 are studied by means of combined experimental and computational techniques. On the experimental side, single crystals grown by the floating-zone method were examined by means of X-ray diffraction, as well as transport and thermal techniques. Density functional theory (DFT) calculations founded on the experimentally determined parent and CDW-modified crysta…
▽ More
Charge density wave (CDW) orders in YNiC2 are studied by means of combined experimental and computational techniques. On the experimental side, single crystals grown by the floating-zone method were examined by means of X-ray diffraction, as well as transport and thermal techniques. Density functional theory (DFT) calculations founded on the experimentally determined parent and CDW-modified crystal structures provide details of electronic and phononic structures as well as electron-phonon coupling and resolve changes inflicted upon entering the different CDW phases. Thereby, contrasting effects of subsequently emerging CDW states characterized by incommensurate q_{1ic} and commensurate q_{2c} modulation vectors are revealed. The former state, on-setting below T_{1ic}~ 305 K, weakly modifies the electronic structure by opening an almost isotropic gap on a minor part of the Fermi surface (FS). The latter phase, which takes over below T_{2c}~ 272 K has a more pronounced impact on physical properties via a decomposition of larger parts of the FS. These dissimilar behaviors are directly reflected in the electronic transport anisotropy, which is significantly weakened in the q_{2c}-type CDW state. As revealed by our DFT studies, CDW phases are very close in energy and their origin is directly related to the anisotropy of electron-phonon coupling, which is linked to a specific orbital character of related FS sheets. Specific heat and thermal expansion studies reveal a nearly reversible first-order phase transition at around T_{2c}~ 272 K, where both CDW phases co-exist within a T-interval of about 10 K.
△ Less
Submitted 6 May, 2025; v1 submitted 4 November, 2024;
originally announced November 2024.
-
Ce$_3$Bi$_4$Ni$_3$ $-$ A large hybridization-gap variant of Ce$_3$Bi$_4$Pt$_3$
Authors:
D. M. Kirschbaum,
X. Yan,
M. Waas,
R. Svagera,
A. Prokofiev,
B. Stöger,
G. Giester,
P. Rogl,
D. -G. Oprea,
C. Felser,
R. Valentí,
M. G. Vergniory,
J. Custers,
S. Paschen,
D. A. Zocco
Abstract:
The family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce$_3$Bi$_4$Ni$_3$. It is an isoelectronic analog of the prototypical Kondo insulator Ce$_3$Bi$_4$Pt$_3$ and of the recently discovered Weyl-Kondo semimetal Ce$_3$Bi$_4$Pd$_3$. In cont…
▽ More
The family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce$_3$Bi$_4$Ni$_3$. It is an isoelectronic analog of the prototypical Kondo insulator Ce$_3$Bi$_4$Pt$_3$ and of the recently discovered Weyl-Kondo semimetal Ce$_3$Bi$_4$Pd$_3$. In contrast to the volume-preserving Pt-Pd substitution, structural and chemical analyses reveal a positive chemical pressure effect in Ce$_3$Bi$_4$Ni$_3$ relative to its heavier counterparts. Based on the results of electrical resistivity, Hall effect, magnetic susceptibility, and specific heat measurements, we identify an energy gap of 65-70 meV, about eight times larger than that in Ce$_3$Bi$_4$Pt$_3$ and about 45 times larger than that of the Kondo-insulating background hosting the Weyl nodes in Ce$_3$Bi$_4$Pd$_3$. We show that this gap as well as other physical properties do not evolve monotonically with increasing atomic number, i.e., in the sequence Ce$_3$Bi$_4$Ni$_3$-Ce$_3$Bi$_4$Pd$_3$-Ce$_3$Bi$_4$Pt$_3$, but instead with increasing partial electronic density of states of the $d$ orbitals at the Fermi energy. To understand under which condition topological states form in these materials is a topic for future studies.
△ Less
Submitted 5 June, 2024; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Anisotropic Physical Properties of the Kondo Semimetal CeCu$_{1.11}$As$_2$
Authors:
Lukas Cvitkovich,
Diego A. Zocco,
Gaku Eguchi,
Monika Waas,
Robert Svagera,
Berthold Stöger,
Rajib Mondal,
Arumugam Thamizhavel,
Silke Paschen
Abstract:
The recently proposed novel materials class called Weyl-Kondo semimetal (WKSM) is a time reversal invariant but inversion symmetry broken Kondo semimetal in which Weyl nodes are pushed to the Fermi level by the Kondo interaction. Here we explore whether CeCu$_{1+x}$As$_2$ may be a new WKSM candidate. We report on its single-crystal growth, structure determination and physical properties investigat…
▽ More
The recently proposed novel materials class called Weyl-Kondo semimetal (WKSM) is a time reversal invariant but inversion symmetry broken Kondo semimetal in which Weyl nodes are pushed to the Fermi level by the Kondo interaction. Here we explore whether CeCu$_{1+x}$As$_2$ may be a new WKSM candidate. We report on its single-crystal growth, structure determination and physical properties investigation. Previously published studies on polycrystalline samples suggest that it is indeed a Kondo semimetal, which is confirmed by our investigations on single crystals. X-ray diffraction reveals that CeCu$_{1+x}$As$_2$ crystallizes in a tetragonal centrosymmetric structure, although the inversion symmetry could still be broken locally due to partially occupied Cu sites. Chemical analysis results in an average occupation $x$ = 0.11(1). The electrical resistivity increases logarithmically with decreasing temperature, and saturates below 10 K. A Kondo temperature $T_{\mathrm{K}}$ $\approx$ 4 K is extracted from entropy, estimated from the specific heat measurements. From Hall effect experiments, a charge carrier density of $8.8 \times 10^{20}$ cm$^{-3}$ is extracted, a value characteristic of a semimetal. The magnetization shows pronounced anisotropy, with no evidence of magnetic ordering down to 0.4 K. We thus classify CeCu$_{1.11}$As$_2$ as a tetragonal Kondo semimetal with anisotropic magnetic properties, with a possibly broken inversion symmetry, thus fulfilling the necessary conditions for a WKSM state.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Adsorption of water at the SrO surface of ruthenates
Authors:
Daniel Halwidl,
Bernhard Stöger,
Wernfried Mayr-Schmölzer,
Jiri Pavelec,
David Fobes,
Jin Peng,
Zhiqiang Mao,
Gareth S. Parkinson,
Michael Schmid,
Florian Mittendorfer,
Josef Redinger,
Ulrike Diebold
Abstract:
Although perovskite oxides hold promise in applications ranging from solid oxide fuel cells to catalysts, their surface chemistry is poorly understood at the molecular level. Here we follow the formation of the first monolayer of water at the (001) surfaces of Sr$_{n+1}$Ru$_n$O$_{3n+1}$ ($n$ = 1, 2) using low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and density…
▽ More
Although perovskite oxides hold promise in applications ranging from solid oxide fuel cells to catalysts, their surface chemistry is poorly understood at the molecular level. Here we follow the formation of the first monolayer of water at the (001) surfaces of Sr$_{n+1}$Ru$_n$O$_{3n+1}$ ($n$ = 1, 2) using low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and density functional theory. These layered perovskites cleave between neighbouring SrO planes, yielding almost ideal, rocksalt-like surfaces. An adsorbed monomer dissociates and forms a pair of hydroxide ions. The OH stemming from the original molecule stays trapped at Sr-Sr bridge positions, circling the surface OH with a measured activation energy of 187 $\pm$ 10 meV. At higher coverage, dimers of dissociated water assemble into one-dimensional chains and form a percolating network where water adsorbs molecularly in the gaps. Our work shows the limitations of applying surface chemistry concepts derived for binary rocksalt oxides to perovskites.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
High chemical activity of a perovskite surface: reaction of CO with Sr$_3$Ru$_2$O$_7$
Authors:
Bernhard Stöger,
Marcel Hieckel,
Florian Mittendorfer,
Zhiming Wang,
David Fobes,
Jin Peng,
Zhiqiang Mao,
Michael Schmid,
Josef Redinger,
Ulrike Diebold
Abstract:
Adsorption of CO at the Sr$_3$Ru$_2$O$_7$(001) surface was studied with low-temperature scanning tunneling microscopy (STM) and density functional theory. In situ cleaved single crystals terminate in an almost perfect SrO surface. At 78 K, CO first populates impurities and then adsorbs above the apical surface O with a binding energy E$_\mathrm{ads}$=-0.7 eV. Above 100 K, this physisorbed CO repla…
▽ More
Adsorption of CO at the Sr$_3$Ru$_2$O$_7$(001) surface was studied with low-temperature scanning tunneling microscopy (STM) and density functional theory. In situ cleaved single crystals terminate in an almost perfect SrO surface. At 78 K, CO first populates impurities and then adsorbs above the apical surface O with a binding energy E$_\mathrm{ads}$=-0.7 eV. Above 100 K, this physisorbed CO replaces the surface O, forming a bent CO2 with the C end bound to the Ru underneath. The resulting metal carboxylate (Ru-COO) can be desorbed by STM manipulation. A low activation (0.2 eV) and high binding (-2.2 eV) energy confirm a strong reaction between CO and regular surface sites of Sr$_3$Ru$_2$O$_7$; likely, this reaction causes the "UHV aging effect" reported for this and other perovskite oxides.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Point defects at cleaved Sr$_{n+1}$Ru$_n$O$_{3n+1}$(001) surfaces
Authors:
Bernhard Stöger,
Marcel Hieckel,
Florian Mittendorfer,
Zhiming Wang,
Michael Schmid,
Gareth S. Parkinson,
David Fobes,
Jin Peng,
John. E. Ortmann,
Andreas Limbeck,
Zhiqiang Mao,
Josef Redinger,
Ulrike Diebold
Abstract:
The (001) surfaces of cleaved Sr$_3$Ru$_2$O$_7$ and Sr$_2$RuO$_4$ samples were investigated using low-temperature scanning tunneling microscopy and density functional theory calculations. Intrinsic defects are not created during cleaving. This experimental observation is consistent with calculations, where the formation energy for a Sr and O vacancy, 4.19 eV and 3.81 eV, respectively, is significa…
▽ More
The (001) surfaces of cleaved Sr$_3$Ru$_2$O$_7$ and Sr$_2$RuO$_4$ samples were investigated using low-temperature scanning tunneling microscopy and density functional theory calculations. Intrinsic defects are not created during cleaving. This experimental observation is consistent with calculations, where the formation energy for a Sr and O vacancy, 4.19 eV and 3.81 eV, respectively, is significantly larger than that required to cleave the crystal, 1.11 eV/(1 $\times$ 1) unit cell. Surface oxygen vacancies can be created through electron bombardment, however, and their appearance is shown to vary strongly with the imaging conditions. Point defects observed on as-cleaved surfaces result from bulk impurities and adsorption from the residual gas.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Single crystal study of the charge density wave metal LuNiC2
Authors:
S. Steiner,
H. Michor,
O. Sologub,
B. Hinterleitner,
F. Hoefenstock,
M. Waas,
E. Bauer,
B. Stoeger,
V. Babizhetskyy,
V. Levytskyy,
B. Kotur
Abstract:
We report on single crystal growth, single crystal x-ray diffraction, physical properties and density functional theory (DFT) electronic structure as well as Fermi surface calculations for two ternary carbides, LuCoC2 and LuNiC2. Electrical resistivity measurements reveal for LuNiC2 a charge density wave (CDW) transition at T_{CDW}~ 450 K and, for T > T_{CDW}, a significant anisotropy of the elect…
▽ More
We report on single crystal growth, single crystal x-ray diffraction, physical properties and density functional theory (DFT) electronic structure as well as Fermi surface calculations for two ternary carbides, LuCoC2 and LuNiC2. Electrical resistivity measurements reveal for LuNiC2 a charge density wave (CDW) transition at T_{CDW}~ 450 K and, for T > T_{CDW}, a significant anisotropy of the electrical resistivity, which is lowest along the orthorhombic a-axis. The analysis of x-ray superstructure reflections suggest a commensurate CDW state with a Peierls-type distortion of the Ni atom periodicity along the orthorhombic a-axis. DFT calculations based on the CDW modulated monoclinic structure model of LuNiC2 as compared to results of the orthorhombic parent-type reveal the formation of a partial CDW gap at the Fermi level which reduces the electronic density of states from N(E_{F})= 1.03 states/eV f.u. without CDW to N(E_{F})= 0.46 states/eV f.u. in the CDW state. The corresponding bare DFT Sommerfeld value of the latter, gamma_{DFT}^{CDW}= 0.90 mJ/molK^2, reaches reasonable agreement with the experimental value gamma= 0.83(5) mJ/mol\,K^2 of LuNiC2. LuCoC2 displays a simple metallic behavior with neither CDW ordering nor superconductivity above 0.4 K. Its experimental Sommerfeld coefficient, gamma= 5.9 (1) mJ/molK^2, is in realistic correspondence with the calculated, bare Sommerfeld coefficient, gamma_{DFT}= 3.82 mJ/molK^2, of orthorhombic LuCoC2.
△ Less
Submitted 3 May, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Anisotropic two-dimensional electron gas at SrTiO3(110) protected by its native overlayer
Authors:
Zhiming Wang,
Zhicheng Zhong,
Xianfeng Hao,
Stefan Gerhold,
Bernhard Stoger,
Michael Schmid,
Jaime Sanchez-Barriga,
Andrei Varykhalov,
Cesare Franchini,
Karsten Held,
Ulrike Diebold
Abstract:
Two dimensional electron gases (2DEGs) at a oxide heterostructures are attracting considerable attention, as these might substitute conventional semiconductors for novel electronic devices [1]. Here we present a minimal set-up for such a 2DEG -the SrTiO3(110)-(4 x 1) surface, natively terminated with one monolayer of chemically-inert titania. Oxygen vacancies induced by synchrotron radiation migra…
▽ More
Two dimensional electron gases (2DEGs) at a oxide heterostructures are attracting considerable attention, as these might substitute conventional semiconductors for novel electronic devices [1]. Here we present a minimal set-up for such a 2DEG -the SrTiO3(110)-(4 x 1) surface, natively terminated with one monolayer of chemically-inert titania. Oxygen vacancies induced by synchrotron radiation migrate under- neath this overlayer, this leads to a confining potential and electron doping such that a 2DEG develops. Our angular resolved photoemission spectroscopy (ARPES) and theoretical results show that confinement along (110) is strikingly different from a (001) crystal orientation. In particular the quantized subbands show a surprising "semi-heavy" band, in contrast to the analogue in the bulk, and a high electronic anisotropy. This anisotropy and even the effective mass of the (110) 2DEG is tunable by doping, offering a high flexibility to engineer the properties of this system.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.
