-
Direct-Laser-Written Polymer Nanowire Waveguides for Broadband Single Photon Collection from Epitaxial Quantum Dots into a Gaussian-like Mode
Authors:
Edgar Perez,
Cori Haws,
Marcelo Davanco,
Jindong Song,
Luca Sapienza,
Kartik Srinivasan
Abstract:
Single epitaxial quantum dots (QDs) embedded in nanophotonic geometries are a leading technology for quantum light generation. However, efficiently coupling their emission into a single mode fiber or Gaussian beam often remains challenging. Here, we use direct laser writing (DLW) to address this challenge by fabricating 1 $μ$m diameter polymer nanowires (PNWs) in-contact-with and perpendicular-to…
▽ More
Single epitaxial quantum dots (QDs) embedded in nanophotonic geometries are a leading technology for quantum light generation. However, efficiently coupling their emission into a single mode fiber or Gaussian beam often remains challenging. Here, we use direct laser writing (DLW) to address this challenge by fabricating 1 $μ$m diameter polymer nanowires (PNWs) in-contact-with and perpendicular-to a QD-containing GaAs layer. QD emission is coupled to the PNW's HE$_{11}$ waveguide mode, enhancing collection efficiency into a single-mode fiber. PNW fabrication does not alter the QD device layer, making PNWs well-suited for augmenting preexisting in-plane geometries. We study standalone PNWs and PNWs in conjunction with metallic nanoring devices that have been previously established for increasing extraction of QD emission. We report methods that mitigate standing wave reflections and heat, caused by GaAs's absorption/reflection of the lithography beam, which otherwise prevent PNW fabrication. We observe a factor of $(3.0 \pm 0.7)\times$ improvement in a nanoring system with a PNW compared to the same system without a PNW, in line with numerical results, highlighting the PNW's ability to waveguide QD emission and increase collection efficiency simultaneously. These results demonstrate new DLW functionality in service of quantum emitter photonics that maintains compatibility with existing top-down fabrication approaches.
△ Less
Submitted 26 May, 2023; v1 submitted 10 May, 2023;
originally announced May 2023.
-
Thermal release tape-assisted semiconductor membrane transfer process for hybrid photonic devices embedding quantum emitters
Authors:
Cori Haws,
Biswarup Guha,
Edgar Perez,
Marcelo Davanco,
Jin Dong Song,
Kartik Srinivasan,
Luca Sapienza
Abstract:
Being able to combine different materials allows taking advantage of different properties and device engineering that cannot be found or exploited within a single material system. In quantum nano-photonics, one might want to increase the device functionalities by, for instance, combining efficient classical and quantum light emission available in III-V semiconductors, low-loss light propagation ac…
▽ More
Being able to combine different materials allows taking advantage of different properties and device engineering that cannot be found or exploited within a single material system. In quantum nano-photonics, one might want to increase the device functionalities by, for instance, combining efficient classical and quantum light emission available in III-V semiconductors, low-loss light propagation accessible in silicon-based materials, fast electro-optical properties of lithium niobate and broadband reflectors and/or buried metallic contacts for local electric field application or electrical injection of emitters. We propose a transfer printing technique based on the removal of arrays of free-standing membranes and their deposition onto a host material using a thermal release adhesive tape-assisted process. This approach is versatile, in that it poses limited restrictions on the transferred and host materials. In particular, we transfer 190 nm-thick GaAs membranes, with dimensions up to about 260$μ$m x 80$μ$m, containing InAs quantum dots, onto a gold substrate. We show that the presence of a back reflector combined with the etching of micro-pillars significantly increases the extraction efficiency of quantum light, reaching photon fluxes, from a single quantum dot line, exceeding 8 x 10$^5$ photons per second, which is four times higher than the highest count rates measured, on the same chip, from emitters outside the pillars. Given the versatility and the ease of the process, this technique opens the path to the realisation of hybrid quantum and nano-photonic devices that can combine virtually any material that can be undercut to realise free-standing membranes that are then transferred onto any host substrate, without specific compatibility issues and/or requirements.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Broadband, efficient extraction of quantum light by a photonic device comprised of a metallic nano-ring and a gold back reflector
Authors:
Cori Haws,
Edgar Perez,
Marcelo Davanco,
Jin Dong Song,
Kartik Srinivasan,
Luca Sapienza
Abstract:
To implement quantum light sources based on quantum emitters in applications, it is desirable to improve the extraction efficiency of single photons. In particular controlling the directionality and solid angle of the emission are key parameters, for instance, to couple single photons into optical fibers and send the information encoded in quantum light over long distances, for quantum communicati…
▽ More
To implement quantum light sources based on quantum emitters in applications, it is desirable to improve the extraction efficiency of single photons. In particular controlling the directionality and solid angle of the emission are key parameters, for instance, to couple single photons into optical fibers and send the information encoded in quantum light over long distances, for quantum communication applications. In addition, fundamental studies of the radiative behavior of quantum emitters, including studies of coherence and blinking, benefit from such improved photon collection. Quantum dots grown via Stranski-Krastanov technique have shown to be good candidates for bright, coherent, indistinguishable quantum light emission. However, one of the challenges associated with these quantum light sources arises from the fact that the emission wavelengths can vary from one emitter to the other. To this end, broadband light extractors that do not rely on high-quality factor optical cavities would be desirable, so that no tuning between the quantum dot emission wavelength and the resonator used to increase the light extraction is needed. Here, we show that metallic nano-rings combined with gold back reflectors increase the collection efficiency of single photons and we study the statistics of this effect when quantum dots are spatially randomly distributed within the nano-rings. We show an average increase in the brightness of about a factor 7.5, when comparing emitters within and outside the nano-rings in devices with a gold back reflector, we measure count rates exceeding 7 x 10^6 photons per second and single photon purities as high as 85% +/- 1%. These results are important steps towards the realisation of scalable, broadband, easy to fabricate sources of quantum light for quantum communication applications.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Topological Frequency Combs and Nested Temporal Solitons
Authors:
Sunil Mittal,
Gregory Moille,
Kartik Srinivasan,
Yanne K. Chembo,
Mohammad Hafezi
Abstract:
Recent advances in realizing optical frequency combs using nonlinear parametric processes in integrated photonic resonators have revolutionized on-chip optical clocks, spectroscopy, and multi-channel optical communications. At the same time, the introduction of topological physics in photonic systems has provided a new paradigm to engineer the flow of photons, and thereby, design photonic devices…
▽ More
Recent advances in realizing optical frequency combs using nonlinear parametric processes in integrated photonic resonators have revolutionized on-chip optical clocks, spectroscopy, and multi-channel optical communications. At the same time, the introduction of topological physics in photonic systems has provided a new paradigm to engineer the flow of photons, and thereby, design photonic devices with novel functionalities and inherent robustness against fabrication disorders. Here, we use topological design principles to theoretically propose the generation of optical frequency combs and temporal Kerr solitons in a two-dimensional array of coupled ring resonators that creates a synthetic magnetic field for photons and exhibits topological edge states. We show that these topological edge states constitute a traveling-wave super-ring resonator that leads to the generation of coherent nested optical frequency combs, and self-formation of nested temporal solitons and Turing rolls that are remarkably phase-locked over >40 rings. In the nested soliton regime, our system operates as a pulsed optical frequency comb and achieves a mode efficiency of >50%, an order of magnitude higher than single ring frequency combs that are theoretically limited to only ~5%. Furthermore, we show that the topological nested solitons are robust against defects in the lattice. This topological frequency comb works in a parameter regime that can be readily accessed using existing low loss integrated photonic platforms like silicon-nitride. Our results could pave the way for efficient on-chip optical frequency combs, and investigations of various other soliton solutions in conjunction with synthetic gauge fields and topological phenomena in large arrays of coupled resonators.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Wavelength transduction from a 3D microwave cavity to telecom using piezoelectric optomechanical crystals
Authors:
H. Ramp,
T. J. Clark,
B. D. Hauer,
C. Doolin,
K. C. Balram,
K. Srinivasan,
J. P. Davis
Abstract:
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical cry…
▽ More
Microwave to optical transduction has received a great deal of interest from the cavity optomechanics community as a landmark application for electro-optomechanical systems. In this Letter, we demonstrate a novel transducer that combines high-frequency mechanical motion and a microwave cavity for the first time. The system consists of a 3D microwave cavity and a gallium arsenide optomechanical crystal, which has been placed in the microwave electric field maximum. This allows the microwave cavity to actuate the gigahertz-frequency mechanical breathing mode in the optomechanical crystal through the piezoelectric effect, which is then read out using a telecom optical mode. The gallium arsenide optomechanical crystal is a good candidate for low-noise microwave-to-telecom transduction, as it has been previously cooled to the mechanical ground state in a dilution refrigerator. Moreover, the 3D microwave cavity architecture can naturally be extended to couple to superconducting qubits and to create hybrid quantum systems.
△ Less
Submitted 25 April, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Microwave-to-optical transduction using a mechanical supermode for coupling piezoelectric and optomechanical resonators
Authors:
Marcelo Wu,
Emil Zeuthen,
Krishna Coimbatore Balram,
Kartik Srinivasan
Abstract:
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the co…
▽ More
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $η$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO$_3$, and AlN-on-Si platforms. We present strategies for maximizing $η$ and minimizing $N$, and find that simultaneously achieving $η>50~\%$ and $N < 0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
△ Less
Submitted 20 January, 2020; v1 submitted 10 July, 2019;
originally announced July 2019.
-
Indistinguishable photons from deterministically integrated single quantum dots in heterogeneous GaAs/Si$_3$N$_4$ quantum photonic circuits
Authors:
Peter Schnauber,
Anshuman Singh,
Johannes Schall,
Suk In Park,
Jin Dong Song,
Sven Rodt,
Kartik Srinivasan,
Stephan Reitzenstein,
Marcelo Davanco
Abstract:
Silicon photonics enables scaling of quantum photonic systems by allowing the creation of extensive, low-loss, reconfigurable networks linking various functional on-chip elements. Inclusion of single quantum emitters onto photonic circuits, acting as on-demand sources of indistinguishable photons or single-photon nonlinearities, may enable large-scale chip-based quantum photonic circuits and netwo…
▽ More
Silicon photonics enables scaling of quantum photonic systems by allowing the creation of extensive, low-loss, reconfigurable networks linking various functional on-chip elements. Inclusion of single quantum emitters onto photonic circuits, acting as on-demand sources of indistinguishable photons or single-photon nonlinearities, may enable large-scale chip-based quantum photonic circuits and networks. Towards this, we use low-temperature $\textit{in situ}$ electron-beam lithography to deterministically produce hybrid GaAs/Si$_3$N$_4$ photonic devices containing single InAs quantum dots precisely located inside nanophotonic structures, which act as efficient, Si$_3$N$_4$ waveguide-coupled on-chip, on-demand single-photon sources. The precise positioning afforded by our scalable fabrication method furthermore allows observation of post-selected indistinguishable photons. This indicates a promising path towards significant scaling of chip-based quantum photonics, enabled by large fluxes of indistinguishable single-photons produced on-demand, directly on-chip.
△ Less
Submitted 28 May, 2019;
originally announced May 2019.
-
Elimination of Thermomechanical Noise in Piezoelectric Optomechanical Crystals
Authors:
H. Ramp,
B. D. Hauer,
K. C. Balram,
T. J. Clark,
K. Srinivasan,
J. P. Davis
Abstract:
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eli…
▽ More
Mechanical modes are a potentially useful resource for quantum information applications, such as quantum-level wavelength transducers, due to their ability to interact with electromagnetic radiation across the spectrum. A significant challenge for wavelength transducers is thermomechanical noise in the mechanical mode, which pollutes the transduced signal with thermal states. In this paper, we eliminate thermomechanical noise in the GHz-frequency mechanical breathing mode of a piezoelectric optomechanical crystal using cryogenic cooling in a dilution refrigerator. We optically measure an average thermal occupancy of the mechanical mode of only $0.7\pm0.4 ~ \mathrm{phonons}$, providing a path towards low-noise microwave-to-optical conversion in the quantum regime.
△ Less
Submitted 15 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Microwave-to-optics conversion using a mechanical oscillator in its quantum groundstate
Authors:
Moritz Forsch,
Robert Stockill,
Andreas Wallucks,
Igor Marinkovic,
Claus Gärtner,
Richard A. Norte,
Frank van Otten,
Andrea Fiore,
Kartik Srinivasan,
Simon Gröblacher
Abstract:
Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrate…
▽ More
Conversion between signals in the microwave and optical domains is of great interest both for classical telecommunication, as well as for connecting future superconducting quantum computers into a global quantum network. For quantum applications, the conversion has to be both efficient, as well as operate in a regime of minimal added classical noise. While efficient conversion has been demonstrated using mechanical transducers, they have so far all operated with a substantial thermal noise background. Here, we overcome this limitation and demonstrate coherent conversion between GHz microwave signals and the optical telecom band with a thermal background of less than one phonon. We use an integrated, on-chip electro-opto-mechanical device that couples surface acoustic waves driven by a resonant microwave signal to an optomechanical crystal featuring a 2.7 GHz mechanical mode. We initialize the mechanical mode in its quantum groundstate, which allows us to perform the transduction process with minimal added thermal noise, while maintaining an optomechanical cooperativity >1, so that microwave photons mapped into the mechanical resonator are effectively upconverted to the optical domain. We further verify the preservation of the coherence of the microwave signal throughout the transduction process.
△ Less
Submitted 2 May, 2020; v1 submitted 18 December, 2018;
originally announced December 2018.
-
Direct observation of nanofabrication influence on the optical properties of single self-assembled InAs/GaAs quantum dots
Authors:
Jin Liu,
Kumarasiri Konthasinghe,
Marcelo Davanco,
John Lawall,
Vikas Anant,
Varun Verma,
Richard Mirin,
Sae Woo Nam,
Jin Dong Song,
Ben Ma,
Ze Sheng Chen,
Hai Qiao Ni,
Zhi Chuan Niu,
Kartik Srinivasan
Abstract:
Single self-assembled InAs/GaAs quantum dots are a promising solid-state quantum technology, with which vacuum Rabi splitting, single-photon-level nonlinearities, and bright, pure, and indistinguishable single-photon generation having been demonstrated. For such achievements, nanofabrication is used to create structures in which the quantum dot preferentially interacts with strongly-confined optic…
▽ More
Single self-assembled InAs/GaAs quantum dots are a promising solid-state quantum technology, with which vacuum Rabi splitting, single-photon-level nonlinearities, and bright, pure, and indistinguishable single-photon generation having been demonstrated. For such achievements, nanofabrication is used to create structures in which the quantum dot preferentially interacts with strongly-confined optical modes. An open question is the extent to which such nanofabrication may also have an adverse influence, through the creation of traps and surface states that could induce blinking, spectral diffusion, and dephasing. Here, we use photoluminescence imaging to locate the positions of single InAs/GaAs quantum dots with respect to alignment marks with < 5 nm uncertainty, allowing us to measure their behavior before and after fabrication. We track the quantum dot emission linewidth and photon statistics as a function of distance from an etched surface, and find that the linewidth is significantly broadened (up to several GHz) for etched surfaces within a couple hundred nanometers of the quantum dot. However, we do not observe appreciable reduction of the quantum dot radiative efficiency due to blinking. We also show that atomic layer deposition can stabilize spectral diffusion of the quantum dot emission, and partially recover its linewidth.
△ Less
Submitted 26 October, 2017;
originally announced October 2017.
-
Effect(s) of Cobalt Substitution in $L1_{0}$-(Fe,Co)Pt Thin Films
Authors:
Shoya Sakamoto,
Kumar Srinivasan,
Rui Zhang,
Oleg Krupin,
Keisuke Ikeda,
Goro Shibata,
Yosuke Nonaka,
Zhendong Chi,
Masako Sakamaki,
Kenta Amemiya,
Atsushi Fujimori,
Antony Ajan
Abstract:
We have studied the effect of cobalt substitution in $L1_{0}$-Fe$_{1-x}$Co$_{x}$Pt films by means of x-ray magnetic circular dichroism (XMCD) and first-principles calculations. The magnetic moments of Fe ($\sim$2.5 $μ_{\rm B}$) and Co ($\sim$1.5 $μ_{\rm B}$) deduced using XMCD were almost unchanged upon Co doping, and the net magnetization decreases with increasing Co content. Calculation also sho…
▽ More
We have studied the effect of cobalt substitution in $L1_{0}$-Fe$_{1-x}$Co$_{x}$Pt films by means of x-ray magnetic circular dichroism (XMCD) and first-principles calculations. The magnetic moments of Fe ($\sim$2.5 $μ_{\rm B}$) and Co ($\sim$1.5 $μ_{\rm B}$) deduced using XMCD were almost unchanged upon Co doping, and the net magnetization decreases with increasing Co content. Calculation also showed that the 3$d$ electrons that have been added by Co substitution occupy only spin-down bands.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Cascaded emission of single photons from the biexciton in monolayered WSe2
Authors:
Yu-Ming He,
Oliver Iff,
Nils Lundt,
Vasilij Baumann,
Marcelo Davanco,
Kartik Srinivasan,
Sven Höfling,
Christian Schneider
Abstract:
Monolayers of transition metal dichalcogenide materials emerged as a new material class to study excitonic effects in solid state, since they benefit from enormous coulomb correlations between electrons and holes. Especially in WSe2, sharp emission features have been observed at cryogenic temperatures, which act as single photon sources . Tight exciton localization has been assumed to induce an an…
▽ More
Monolayers of transition metal dichalcogenide materials emerged as a new material class to study excitonic effects in solid state, since they benefit from enormous coulomb correlations between electrons and holes. Especially in WSe2, sharp emission features have been observed at cryogenic temperatures, which act as single photon sources . Tight exciton localization has been assumed to induce an anharmonic excitation spectrum, however, the evidence of the hypothesis, namely the demonstration of a localized biexciton, is elusive. Here, we unambiguously demonstrate the existence of a localized biexciton in a monolayer of WSe2, which triggers an emission cascade of single photons. The biexciton is identified by its time-resolved photoluminescence, superlinearity and distinct polarization in micro-photoluminescence experiments. We evidence the cascaded nature of the emission process in a cross-correlation experiment, which yields a strong bunching behavior. Our work paves the way to a new generation of quantum optics experiments with two-dimensional semiconductors.
△ Less
Submitted 6 May, 2017;
originally announced May 2017.
-
Cryogenic photoluminescence imaging system for nanoscale positioning of single quantum emitters
Authors:
Jin Liu,
Macelo Davanco,
Luca Sapienza,
Kumarasiri Konthasinghe,
Jose Vinicius De Miranda Cardoso,
Jin Dong Song,
Antonio Badolato,
Kartik Srinivasan
Abstract:
We report a photoluminescence imaging system for locating single quantum emitters with respect to alignment features. Samples are interrogated in a 4~K closed-cycle cryostat by a high numerical aperture (NA=0.9, 100$\times$ magnification) objective that sits within the cryostat, enabling high efficiency collection of emitted photons without image distortions due to the cryostat windows. The locati…
▽ More
We report a photoluminescence imaging system for locating single quantum emitters with respect to alignment features. Samples are interrogated in a 4~K closed-cycle cryostat by a high numerical aperture (NA=0.9, 100$\times$ magnification) objective that sits within the cryostat, enabling high efficiency collection of emitted photons without image distortions due to the cryostat windows. The locations of single InAs/GaAs quantum dots within a $>50$~$μ$m~$\times$~50~$μ$m field of view are determined with $\approx4.5$~nm uncertainty (one standard deviation) in a 1~s long acquisition. The uncertainty is determined through a combination of a maximum likelihood estimate for localizing the quantum dot emission, and a cross-correlation method for determining the alignment mark center. This location technique can be an important step in the high-throughput creation of nanophotonic devices that rely upon the interaction of highly confined optical modes with single quantum emitters.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Combined atomic force microscopy and photoluminescence imaging to select single InAs/GaAs quantum dots for quantum photonic devices
Authors:
Luca Sapienza,
Jin Liu,
Jin Dong Song,
Stefan Falt,
Werner Wegscheider,
Antonio Badolato,
Kartik Srinivasan
Abstract:
We report on a combined photoluminescence imaging and atomic force microscopy study of single, isolated self-assembled InAs quantum dots (density <0.01 um^(-2) capped by a 95 nm GaAs layer, and emitting around 950 nm. By combining optical and scanning probe characterization techniques, we determine the position of single quantum dots with respect to comparatively large (100 nm to 1000 nm in-plane…
▽ More
We report on a combined photoluminescence imaging and atomic force microscopy study of single, isolated self-assembled InAs quantum dots (density <0.01 um^(-2) capped by a 95 nm GaAs layer, and emitting around 950 nm. By combining optical and scanning probe characterization techniques, we determine the position of single quantum dots with respect to comparatively large (100 nm to 1000 nm in-plane dimension) topographic features. We find that quantum dots often appear (>25% of the time) in the vicinity of these features, but generally do not exhibit significant differences in their non-resonantly pumped emission spectra in comparison to quantum dots appearing in defect-free regions. This behavior is observed across multiple wafers produced in different growth chambers. Our characterization approach is relevant to applications in which single quantum dots are embedded within nanofabricated photonic devices, where such large surface features can affect the interaction with confined optical fields and the quality of the single-photon emission. In particular, we anticipate using this approach to screen quantum dots not only based on their optical properties, but also their surrounding surface topographies.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Efficient fiber-coupled single-photon source based on quantum dots in a photonic-crystal waveguide
Authors:
Raphaël S. Daveau,
Krishna C. Balram,
Tommaso Pregnolato,
Jin Liu,
Eun H. Lee,
Jin D. Song,
Varun Verma,
Richard Mirin,
Sae Woo Nam,
Leonardo Midolo,
Søren Stobbe,
Kartik Srinivasan,
Peter Lodahl
Abstract:
Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupl…
▽ More
Many photonic quantum information processing applications would benefit from a high brightness, fiber-coupled source of triggered single photons. Here, we present a fiber-coupled photonic-crystal waveguide single-photon source relying on evanescent coupling of the light field from a tapered out-coupler to an optical fiber. A two-step approach is taken where the performance of the tapered out-coupler is recorded first on an independent device containing an on-chip reflector. Reflection measurements establish that the chip-to-fiber coupling efficiency exceeds 80 %. The detailed characterization of a high-efficiency photonic-crystal waveguide extended with a tapered out-coupling section is then performed. The corresponding overall single-photon source efficiency is 10.9 % $\pm$ 2.3 %, which quantifies the success probability to prepare an exciton in the quantum dot, couple it out as a photon in the waveguide, and subsequently transfer it to the fiber. The applied out-coupling method is robust, stable over time, and broadband over several tens of nanometers, which makes it a highly promising pathway to increase the efficiency and reliability of planar chip-based single-photon sources.
△ Less
Submitted 27 October, 2016;
originally announced October 2016.
-
Observation of Optomechanical Quantum Correlations at Room Temperature
Authors:
T. P. Purdy,
K. E. Grutter,
K. Srinivasan,
J. M. Taylor
Abstract:
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitu…
▽ More
By shining laser light through a nanomechanical beam, we measure the beam's thermally driven vibrations and perturb its motion with optical forces at a level dictated by the Heisenberg measurement-disturbance uncertainty relation. Such quantum backaction is typically difficult to observe at room temperature where the motion driven by optical quantum intensity fluctuations is many orders of magnitude smaller than the thermal motion. We demonstrate a cross-correlation technique to distinguish optically driven motion from thermally driven motion, observing this quantum backaction signature up to room temperature. While it is often difficult to absolutely calibrate optical detection, we use the scale of the quantum correlations, which is determined by fundamental constants, to gauge the size of thermal motion, demonstrating a path towards absolute thermometry with quantum mechanically calibrated ticks.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Imaging Nanophotonic Modes of Microresonators using a Focused Ion Beam
Authors:
Kevin A. Twedt,
Jie Zou,
Marcelo Davanco,
Kartik Srinivasan,
Jabez J. McClelland,
Vladimir A. Aksyuk
Abstract:
Optical microresonators have proven powerful in a wide range of applications, including cavity quantum electrodynamics, biosensing, microfludics, and cavity optomechanics. Their performance depends critically on the exact distribution of optical energy, confined and shaped by the nanoscale device geometry. Near-field optical probes can image this distribution, but the physical probe necessarily pe…
▽ More
Optical microresonators have proven powerful in a wide range of applications, including cavity quantum electrodynamics, biosensing, microfludics, and cavity optomechanics. Their performance depends critically on the exact distribution of optical energy, confined and shaped by the nanoscale device geometry. Near-field optical probes can image this distribution, but the physical probe necessarily perturbs the near field, which is particularly problematic for sensitive high quality factor resonances. We present a new approach to mapping nanophotonic modes that uses a controllably small and local optomechanical perturbation introduced by a focused lithium ion beam. An ion beam (radius about 50 nm) induces a picometer-scale dynamic deformation of the resonator surface, which we detect through a shift in the optical resonance wavelength. We map five modes of a silicon microdisk resonator (Q > 20,000) with both high spatial and spectral resolution. Our technique also enables in-situ observation of ion implantation damage and relaxation dynamics in a silicon lattice.
△ Less
Submitted 22 December, 2015;
originally announced December 2015.
-
Quantum Electromechanics on Silicon Nitride Nanomembranes
Authors:
Johannes M. Fink,
Mahmoud Kalaee,
Alessandro Pitanti,
Richard Norte,
Lukas Heinzle,
Marcelo Davanco,
Kartik Srinivasan,
Oskar Painter
Abstract:
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with…
▽ More
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with spiral inductor coils of micron pitch, this yields microwave ($\approx 8$GHz) resonant circuits of high impedance ($Z_{0} \approx 3.4$k$Ω$) suitable for efficient electromechanical coupling to nanoscale acoustic structures. We measure an electromechanical vacuum coupling rate of $g_{0}/2π= 41.5$~Hz to the low frequency ($4.48$MHz) global beam motion of a patterned phononic crystal nanobeam, and through parametric microwave driving reach a backaction cooled mechanical mode occupancy as low as $n_{m} = 0.58$.
△ Less
Submitted 16 December, 2015; v1 submitted 15 December, 2015;
originally announced December 2015.
-
Coherent coupling between radio frequency, optical, and acoustic waves in piezo-optomechanical circuits
Authors:
Krishna C. Balram,
Marcelo Davanco,
Jin Dong Song,
Kartik Srinivasan
Abstract:
The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipula…
▽ More
The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipulation of the localized mechanical mode either with a radio frequency field through the piezo-electric effect, or optically through the strong photoelastic effect. We use this to demonstrate a novel acoustic wave interference effect, analogous to coherent population trapping in atomic systems, in which the coherent mechanical motion induced by the electrical drive can be completely cancelled out by the optically-driven motion. The ability to manipulate cavity optomechanical systems with equal facility through either photonic or phononic channels enables new device and system architectures for signal transduction between the optical, electrical, and mechanical domains.
△ Less
Submitted 6 August, 2015;
originally announced August 2015.
-
Nanoscale optical positioning of single quantum dots for bright and pure single-photon emission
Authors:
Luca Sapienza,
Marcelo Davanco,
Antonio Badolato,
Kartik Srinivasan
Abstract:
Self-assembled, epitaxially-grown InAs/GaAs quantum dots are promising semiconductor quantum emitters that can be integrated on a chip for a variety of photonic quantum information science applications. However, self-assembled growth results in an essentially random in-plane spatial distribution of quantum dots, presenting a challenge in creating devices that exploit the strong interaction of sing…
▽ More
Self-assembled, epitaxially-grown InAs/GaAs quantum dots are promising semiconductor quantum emitters that can be integrated on a chip for a variety of photonic quantum information science applications. However, self-assembled growth results in an essentially random in-plane spatial distribution of quantum dots, presenting a challenge in creating devices that exploit the strong interaction of single quantum dots with highly confined optical modes. Here, we present a photoluminescence imaging approach for locating single quantum dots with respect to alignment features with an average position uncertainty < 30 nm (< 10 nm when using a solid immersion lens), which represents an enabling technology for the creation of optimized single quantum dot devices. To that end, we create quantum dot single-photon sources, based on a circular Bragg grating geometry, that simultaneously exhibit high collection efficiency (48 % +/- 5 % into a 0.4 numerical aperture lens, close to the theoretically predicted value of 50 %), low multiphoton probability (g(2)(0) <1 %), and a significant Purcell enhancement factor (~ 3).
△ Less
Submitted 5 August, 2015; v1 submitted 24 March, 2015;
originally announced March 2015.
-
Moving boundary and photoelastic coupling in GaAs optomechanical resonators
Authors:
Krishna C. Balram,
M. Davanco,
Ju Young Lim,
Jin Dong Song,
K. Srinivasan
Abstract:
Chip-based cavity optomechanical systems are being considered for applications in sensing, metrology, and quantum information science. Critical to their development is an understanding of how the optical and mechanical modes interact, quantified by the coupling rate $g_{0}$. Here, we develop GaAs optomechanical resonators and investigate the moving dielectric boundary and photoelastic contribution…
▽ More
Chip-based cavity optomechanical systems are being considered for applications in sensing, metrology, and quantum information science. Critical to their development is an understanding of how the optical and mechanical modes interact, quantified by the coupling rate $g_{0}$. Here, we develop GaAs optomechanical resonators and investigate the moving dielectric boundary and photoelastic contributions to $g_{0}$. First, we consider coupling between the fundamental radial breathing mechanical mode and a 1550 nm band optical whispering gallery mode in microdisks. For decreasing disk radius from $R=5$ $μ$m to $R=1$ $μ$m, simulations and measurements show that $g_{0}$ changes from being dominated by the moving boundary contribution to having an equal photoelastic contribution. Next, we design and demonstrate nanobeam optomechanical crystals in which a $2.5$ GHz mechanical breathing mode couples to a 1550 nm optical mode predominantly through the photoelastic effect. We show a significant (30 $\%$) dependence of $g_{0}$ on the device's in-plane orientation, resulting from the difference in GaAs photoelastic coefficients along different crystalline axes, with fabricated devices exhibiting $g_{\text{0}}/2π$ as high as 1.1 MHz for orientation along the [110] axis. GaAs nanobeam optomechanical crystals are a promising system which can combine the demonstrated large optomechanical coupling strength with additional functionality, such as piezoelectric actuation and incorporation of optical gain media.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
Integrated silicon optomechanical transducers and their application in atomic force microscopy
Authors:
Jie Zou,
Marcelo Davanco,
Yuxiang Liu,
Thomas Michels,
Kartik Srinivasan,
Vladimir Aksyuk
Abstract:
This chapter describes the basic design, simulation, and fabrication for fully Si integrated, waveguide coupled, optomechanical force and displacement sensors. The approach of full Si integration of all stationary nanophotonic components with mechanically separated movable components creates the opportunity to independently engineer these two parts for a variety of MEMS and NEMS sensing applicatio…
▽ More
This chapter describes the basic design, simulation, and fabrication for fully Si integrated, waveguide coupled, optomechanical force and displacement sensors. The approach of full Si integration of all stationary nanophotonic components with mechanically separated movable components creates the opportunity to independently engineer these two parts for a variety of MEMS and NEMS sensing applications that require high precision, high bandwidth, and small footprint. Further integration of actuators for static and dynamic actuation is also possible.
△ Less
Submitted 13 May, 2014;
originally announced May 2014.
-
Multiple time scale blinking in InAs quantum dot single-photon sources
Authors:
Marcelo Davanco,
C. Stephen Hellberg,
Serkan Ates,
Antonio Badolato,
Kartik Srinivasan
Abstract:
We use photon correlation measurements to study blinking in single, epitaxially-grown self-assembled InAs quantum dots situated in circular Bragg grating and microdisk cavities. The normalized second-order correlation function g(2)(τ) is studied across eleven orders of magnitude in time, and shows signatures of blinking over timescales ranging from tens of nanoseconds to tens of milliseconds. The…
▽ More
We use photon correlation measurements to study blinking in single, epitaxially-grown self-assembled InAs quantum dots situated in circular Bragg grating and microdisk cavities. The normalized second-order correlation function g(2)(τ) is studied across eleven orders of magnitude in time, and shows signatures of blinking over timescales ranging from tens of nanoseconds to tens of milliseconds. The g(2)(τ) data is fit to a multi-level system rate equation model that includes multiple non-radiating (dark) states, from which radiative quantum yields significantly less than 1 are obtained. This behavior is observed even in situations for which a direct histogramming analysis of the emission time-trace data produces inconclusive results.
△ Less
Submitted 21 April, 2014; v1 submitted 3 June, 2013;
originally announced June 2013.
-
Exciton fine-structure splitting of telecom wavelength single quantum dots: statistics and external strain tuning
Authors:
Luca Sapienza,
Ralph N. E. Malein,
Christopher E. Kuklewicz,
Peter E. Kremer,
Kartik Srinivasan,
Andrew Griffiths,
Edmund Clarke,
Ming Gong,
Richard J. Warburton,
Brian D. Gerardot
Abstract:
In a charge tunable device, we investigate the fine structure splitting of neutral excitons in single long-wavelength (1.1μm < λ< 1.3 μm) InGaAs quantum dots as a function of external uniaxial strain. Nominal fine structure splittings between 16 and 136 μeV are measured and manipulated. We observe varied response of the splitting to the external strain, including positive and negative tuning slope…
▽ More
In a charge tunable device, we investigate the fine structure splitting of neutral excitons in single long-wavelength (1.1μm < λ< 1.3 μm) InGaAs quantum dots as a function of external uniaxial strain. Nominal fine structure splittings between 16 and 136 μeV are measured and manipulated. We observe varied response of the splitting to the external strain, including positive and negative tuning slopes, different tuning ranges, and linear and parabolic dependencies, indicating that these physical parameters depend strongly on the unique microscopic structure of the individual quantum dot. To better understand the experimental results, we apply a phenomenological model describing the exciton polarization and fine-structure splitting under uniaxial strain. The model predicts that, with an increased experimental strain tuning range, the fine-structure can be effectively canceled for select telecom wavelength dots using uniaxial strain. These results are promising for the generation of on-demand entangled photon pairs at telecom wavelengths.
△ Less
Submitted 18 September, 2013; v1 submitted 5 March, 2013;
originally announced March 2013.
-
Improving the performance of bright quantum dot single photon sources using amplitude modulation
Authors:
Serkan Ates,
Imad Agha,
Angelo Gulinatti,
Ivan Rech,
Antonio Badolato,
Kartik Srinivasan
Abstract:
Single epitaxially-grown semiconductor quantum dots have great potential as single photon sources for photonic quantum technologies, though in practice devices often exhibit non-ideal behavior. Here, we demonstrate that amplitude modulation can improve the performance of quantum-dot-based sources. Starting with a bright source consisting of a single quantum dot in a fiber-coupled microdisk cavity,…
▽ More
Single epitaxially-grown semiconductor quantum dots have great potential as single photon sources for photonic quantum technologies, though in practice devices often exhibit non-ideal behavior. Here, we demonstrate that amplitude modulation can improve the performance of quantum-dot-based sources. Starting with a bright source consisting of a single quantum dot in a fiber-coupled microdisk cavity, we use synchronized amplitude modulation to temporally filter the emitted light. We observe that the single photon purity, temporal overlap between successive emission events, and indistinguishability can be greatly improved with this technique. As this method can be applied to any triggered single photon source, independent of geometry and after device fabrication, it is a flexible approach to improve the performance of solid-state systems, which often suffer from excess dephasing and multi-photon background emission.
△ Less
Submitted 10 August, 2012;
originally announced August 2012.
-
Two-photon interference using background-free quantum frequency conversion of single photons from a semiconductor quantum dot
Authors:
Serkan Ates,
Imad Agha,
Angelo Gulinatti,
Ivan Rech,
Matthew T. Rakher,
Antonio Badolato,
Kartik Srinivasan
Abstract:
We show that quantum frequency conversion (QFC) can overcome the spectral distinguishability common to inhomogeneously broadened solid-state quantum emitters. QFC is implemented by combining single photons from an InAs quantum dot (QD) at 980 nm with a 1550 nm pump laser in a periodically-poled lithium niobate (PPLN) waveguide to generate photons at 600 nm with a signal-to-background ratio exceedi…
▽ More
We show that quantum frequency conversion (QFC) can overcome the spectral distinguishability common to inhomogeneously broadened solid-state quantum emitters. QFC is implemented by combining single photons from an InAs quantum dot (QD) at 980 nm with a 1550 nm pump laser in a periodically-poled lithium niobate (PPLN) waveguide to generate photons at 600 nm with a signal-to-background ratio exceeding 100:1. Photon correlation and two-photon interference measurements confirm that both the single photon character and wavepacket interference of individual QD states are preserved during frequency conversion. Finally, we convert two spectrally separate QD transitions to the same wavelength in a single PPLN waveguide and show that the resulting field exhibits non-classical two-photon interference.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
Background-free quantum frequency conversion of single photons from a semiconductor quantum dot
Authors:
Serkan Ates,
Imad Agha,
Antonio Badolato,
Kartik Srinivasan
Abstract:
We demonstrate background-free quantum frequency conversion of single photons from an epitaxially-grown InAs quantum dot. Single photons at \approx 980 nm are combined with a pump laser near 1550 nm inside a periodically-poled lithium niobate (PPLN) waveguide, generating single photons at \approx 600 nm. The large red-detuning between the pump and signal wavelengths ensures nearly background-free…
▽ More
We demonstrate background-free quantum frequency conversion of single photons from an epitaxially-grown InAs quantum dot. Single photons at \approx 980 nm are combined with a pump laser near 1550 nm inside a periodically-poled lithium niobate (PPLN) waveguide, generating single photons at \approx 600 nm. The large red-detuning between the pump and signal wavelengths ensures nearly background-free conversion, avoiding processes such as upconversion of anti-Stokes Raman scattered pump photons in the PPLN crystal. Second-order correlation measurements on the single photon stream are performed both before and after conversion, confirming the preservation of photon statistics during the frequency conversion process.
△ Less
Submitted 10 May, 2012;
originally announced May 2012.
-
Simultaneous Wavelength Translation and Amplitude Modulation of Single Photons from a Quantum Dot
Authors:
Matthew T. Rakher,
Lijun Ma,
Marcelo Davanco,
Oliver Slattery,
Xiao Tang,
Kartik Srinivasan
Abstract:
Hybrid quantum information devices that combine disparate physical systems interacting through photons offer the promise of combining low-loss telecommunications wavelength transmission with high fidelity visible wavelength storage and manipulation. The realization of such systems requires control over the waveform of single photons to achieve spectral and temporal matching. Here, we experimentall…
▽ More
Hybrid quantum information devices that combine disparate physical systems interacting through photons offer the promise of combining low-loss telecommunications wavelength transmission with high fidelity visible wavelength storage and manipulation. The realization of such systems requires control over the waveform of single photons to achieve spectral and temporal matching. Here, we experimentally demonstrate the simultaneous wavelength translation and amplitude modulation of single photons generated by a quantum dot emitting near 1300 nm with an exponentially-decaying waveform (lifetime $\approx$1.5 ns). Quasi-phase-matched sum-frequency generation with a pulsed 1550 nm laser creates single photons at 710 nm with a controlled amplitude modulation at 350 ps timescales.
△ Less
Submitted 19 August, 2011; v1 submitted 17 May, 2011;
originally announced May 2011.
-
Sub-nanosecond Electro-optic Modulation of Triggered Single Photons from a Quantum Dot
Authors:
Matthew T. Rakher,
Kartik Srinivasan
Abstract:
Control of single photon wave-packets is an important resource for developing hybrid quantum systems which are composed of different physical systems interacting via photons. Here we extend this control to triggered photons emitted by a quantum dot, temporally shaping single photon wave-packets on timescales fast compared to their radiative decay by electro-optic modulation. In particular, telecom…
▽ More
Control of single photon wave-packets is an important resource for developing hybrid quantum systems which are composed of different physical systems interacting via photons. Here we extend this control to triggered photons emitted by a quantum dot, temporally shaping single photon wave-packets on timescales fast compared to their radiative decay by electro-optic modulation. In particular, telecommunications-band single photons resulting from the recombination of an exciton in a quantum dot with exponentially decaying wave-packets are synchronously modulated to create Gaussian-shaped single photon wave-packets. We explore other pulse-shapes and investigate the feasibility of this technique for increasing the indistinguishability of quantum dot generated single photons.
△ Less
Submitted 18 March, 2011;
originally announced March 2011.
-
Fiber-based cryogenic and time-resolved spectroscopy of PbS quantum dots
Authors:
Matthew T. Rakher,
Ranojoy Bose,
Chee Wei Wong,
Kartik Srinivasan
Abstract:
PbS quantum dots are promising active emitters for use with high-quality Si nanophotonic devices in the telecommunications-band. Measurements of low quantum dot densities are limited both because of low fluorescence levels and the challenges of single photon detection at these wavelengths. Here, we report on methods using a fiber taper waveguide to efficiently extract PbS quantum dot photoluminesc…
▽ More
PbS quantum dots are promising active emitters for use with high-quality Si nanophotonic devices in the telecommunications-band. Measurements of low quantum dot densities are limited both because of low fluorescence levels and the challenges of single photon detection at these wavelengths. Here, we report on methods using a fiber taper waveguide to efficiently extract PbS quantum dot photoluminescence. Temperature dependent ensemble measurements reveal an increase in emitted photons concomitant with an increase in excited-state lifetime from 58.9 ns at 293 K to 657 ns at 40 K. Measurements are also performed on quantum dots on high-$Q$ ($>10^5$) microdisks using cavity-resonant, pulsed excitation.
△ Less
Submitted 1 December, 2010;
originally announced December 2010.
-
Quantum Transduction of Telecommunications-band Single Photons from a Quantum Dot by Frequency Upconversion
Authors:
Matthew T. Rakher,
Lijun Ma,
Oliver Slattery,
Xiao Tang,
Kartik Srinivasan
Abstract:
The ability to transduce non-classical states of light from one wavelength to another is a requirement for integrating disparate quantum systems that take advantage of telecommunications-band photons for optical fiber transmission of quantum information and near-visible, stationary systems for manipulation and storage. In addition, transducing a single-photon source at 1.3 μm to visible wavelength…
▽ More
The ability to transduce non-classical states of light from one wavelength to another is a requirement for integrating disparate quantum systems that take advantage of telecommunications-band photons for optical fiber transmission of quantum information and near-visible, stationary systems for manipulation and storage. In addition, transducing a single-photon source at 1.3 μm to visible wavelengths for detection would be integral to linear optical quantum computation due to the challenges of detection in the near-infrared. Recently, transduction at single-photon power levels has been accomplished through frequency upconversion, but it has yet to be demonstrated for a true single-photon source. Here, we transduce the triggered single-photon emission of a semiconductor quantum dot at 1.3 μm to 710 nm with a total detection (internal conversion) efficiency of 21% (75%). We demonstrate that the 710 nm signal maintains the quantum character of the 1.3 μm signal, yielding a photon anti-bunched second-order intensity correlation, g^(2)(t), that shows the optical field is composed of single photons with g^(2)(0) = 0.165 < 0.5.
△ Less
Submitted 19 August, 2011; v1 submitted 15 April, 2010;
originally announced April 2010.
-
Spectroscopy of 1.55 $μ$m PbS Quantum Dots on Si Photonic Crystal Cavities with a Fiber Taper Waveguide
Authors:
M. T. Rakher,
R. Bose,
C. W. Wong,
K. Srinivasan
Abstract:
We use an optical fiber taper waveguide to probe PbS quantum dots (QDs) dried on Si photonic crystal cavities near 1.55 $μ$m. We demonstrate that a low density ($\lesssim 100 μ$m$^{-2}$) of QDs does not significantly degrade cavity quality factors as high as $\approx3\times10^4$. We also show that the tapered fiber can be used to excite the QDs and collect the subsequent cavity-filtered photolum…
▽ More
We use an optical fiber taper waveguide to probe PbS quantum dots (QDs) dried on Si photonic crystal cavities near 1.55 $μ$m. We demonstrate that a low density ($\lesssim 100 μ$m$^{-2}$) of QDs does not significantly degrade cavity quality factors as high as $\approx3\times10^4$. We also show that the tapered fiber can be used to excite the QDs and collect the subsequent cavity-filtered photoluminescence, and present measurements of reversible photodarkening and QD saturation. This method represents an important step towards spectroscopy of single colloidal QDs in the telecommunications band.
△ Less
Submitted 7 December, 2009;
originally announced December 2009.
-
Investigations of a coherently driven semiconductor optical cavity QED system
Authors:
Kartik Srinivasan,
Christopher P. Michael,
Raviv Perahia,
Oskar Painter
Abstract:
Chip-based cavity quantum electrodynamics (QED) devices consisting of a self-assembled InAs quantum dot (QD) coupled to a high quality factor GaAs microdisk cavity are coherently probed through their optical channel using a fiber taper waveguide. We highlight one particularly important aspect of this all-fiber measurement setup, which is the accuracy to which the optical coupling level and optic…
▽ More
Chip-based cavity quantum electrodynamics (QED) devices consisting of a self-assembled InAs quantum dot (QD) coupled to a high quality factor GaAs microdisk cavity are coherently probed through their optical channel using a fiber taper waveguide. We highlight one particularly important aspect of this all-fiber measurement setup, which is the accuracy to which the optical coupling level and optical losses are known relative to typical free-space excitation techniques. This allows for precise knowledge of the intracavity photon number and measurement of absolute transmitted and reflected signals. Resonant optical spectroscopy of the system under both weak and strong driving conditions are presented, which when compared with a quantum master equation model of the system allows for determination of the coherent coupling rate between QD exciton and optical cavity mode, the different levels of elastic and inelastic dephasing of the exciton state, and the position and orientation of the QD within the cavity. Pump-probe measurements are also performed in which a far off-resonant red-detuned control laser beam is introduced into the cavity. Rather than producing a measurable ac-Stark shift in the exciton line of the QD, we find that this control beam induces a saturation of the resonant system response. The broad photoluminescence spectrum resulting from the presence of the control beam in the cavity points to sub-bandgap absorption in the semiconductor, and the resulting free-carrier generation, as the likely source of system saturation.
△ Less
Submitted 25 June, 2008;
originally announced June 2008.
-
Single quantum dot spectroscopy using a fiber taper waveguide near-field optic
Authors:
Kartik Srinivasan,
Andreas Stintz,
Sanjay Krishna,
Oskar Painter
Abstract:
Photoluminescence spectroscopy of single InAs quantum dots at cryogenic temperatures (~14 K) is performed using a micron-scale optical fiber taper waveguide as a near-field optic. The measured collection efficiency of quantum dot spontaneous emission into the fundamental guided mode of the fiber taper is estimated at 0.1%, and spatially-resolved measurements with ~600 nm resolution are obtained…
▽ More
Photoluminescence spectroscopy of single InAs quantum dots at cryogenic temperatures (~14 K) is performed using a micron-scale optical fiber taper waveguide as a near-field optic. The measured collection efficiency of quantum dot spontaneous emission into the fundamental guided mode of the fiber taper is estimated at 0.1%, and spatially-resolved measurements with ~600 nm resolution are obtained by varying the taper position with respect to the sample and using the fiber taper for both the pump and collection channels.
△ Less
Submitted 13 June, 2007;
originally announced June 2007.
-
Nonlinear absorption and dispersion in fiber-taper-coupled silicon photonic crystal microresonators
Authors:
Paul E. Barclay,
Kartik Srinivasan,
Oskar Painter
Abstract:
A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a high-Q, ultra-small mode volume, silicon photonic crystal resonant cavity. Cavity mode quality factors of 47000 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated. Using this efficient cavity input and output channel, the steady-state nonlinea…
▽ More
A technique is demonstrated which efficiently transfers light between a tapered standard single-mode optical fiber and a high-Q, ultra-small mode volume, silicon photonic crystal resonant cavity. Cavity mode quality factors of 47000 are measured, and a total fiber-to-cavity coupling efficiency of 44% is demonstrated. Using this efficient cavity input and output channel, the steady-state nonlinear absorption and dispersion of the photonic crystal cavity is studied. Optical bistability is observed for fiber input powers as low as 250 μW, corresponding to a dropped power of 100 μW and 3 fJ of stored cavity energy. A high-density effective free-carrier lifetime for these silicon photonic crystal resonators of 0.5 ns is also estimated from power dependent loss and dispersion measurements.
△ Less
Submitted 30 November, 2004;
originally announced December 2004.
