-
Necking of thin-walled cylinders via bifurcation of incompressible nonlinear elastic solids
Authors:
Roberta Springhetti,
Gabriel Rossetto,
Davide Bigoni
Abstract:
Necking localization under quasi-static uniaxial tension is experimentally observed in ductile thin-walled cylindrical tubes, made of soft polypropylene. Necking nucleates at multiple locations along the tube and spreads throughout, involving higher-order modes, evidencing trefoil and fourthfoiled (but rarely even fifth-foiled) shaped cross-sections. No evidence of such a complicated necking occur…
▽ More
Necking localization under quasi-static uniaxial tension is experimentally observed in ductile thin-walled cylindrical tubes, made of soft polypropylene. Necking nucleates at multiple locations along the tube and spreads throughout, involving higher-order modes, evidencing trefoil and fourthfoiled (but rarely even fifth-foiled) shaped cross-sections. No evidence of such a complicated necking occurrence and growth was found in other ductile materials for thin-walled cylinders under quasi-static loading. With the aim of modelling this phenomenon, as well as all other possible bifurcations, a twodimensional formulation is introduced, in which only the mean surface of the tube is considered, paralleling the celebrated Flügge treatment of axially-compressed cylindrical shells. This treatment is extended to include tension and a broad class of nonlinear-hyperelastic constitutive law for the material, which is also assumed to be incompressible. The theoretical framework leads to a number of new results, not only for tensile axial force (where necking is modelled and, as a particular case, the classic Considère formula is shown to represent the limit of very thin tubes), but also for compressive force, providing closed-form formulae for wrinkling (showing that a direct application of the Flügge equation can be incorrect) and for Euler buckling. It is shown that the J2-deformation theory of plasticity (the simplest constitutive assumption to mimic through nonlinear elasticity the plastic branch of a material) captures multiple necking and occurrence of higher-order modes, so that experiments are explained. The presented results are important for several applications, ranging from aerospace and automotive engineering to the vascular mechanobiology, where a thin-walled tube (for instance an artery, or a catheter, or a stent) may become unstable not only in compression, but also in tension.
△ Less
Submitted 4 September, 2024;
originally announced September 2024.
-
Optimal energy-harvesting cycles for load-driven dielectric generators in plane strain
Authors:
R. Springhetti,
E. Bortot,
G. deBotton,
M. Gei
Abstract:
The performances of energy harvesting generators based on dielectric elastomers are investigated. The configuration is of a thin dielectric film coated by stretchable electrodes at both sides. The film is first stretched, then charged and subsequently, afterwards it is released, and finally the charge is harvested at a higher electric potential. The amount of energy extracted by this cycle is boun…
▽ More
The performances of energy harvesting generators based on dielectric elastomers are investigated. The configuration is of a thin dielectric film coated by stretchable electrodes at both sides. The film is first stretched, then charged and subsequently, afterwards it is released, and finally the charge is harvested at a higher electric potential. The amount of energy extracted by this cycle is bounded by the electric breakdown and the ultimate stretch ratio of the film as well as by structural instabilities due to loss of tension. To identify the optimal cycle that complies with these limits we formulate a constraint optimization problem and solve it with a dedicated solver for two typical classes of elastic dielectrics. As anticipated, we find that the performance of the generator depends critically on the ultimate stretch ratio of the film. However, more surprising is our finding of a universal limit on the dielectric strength of the film beyond which the optimal cycle is independent of this parameter. Thus, we reveal that, regardless of how large the dielectric strength of the material is, there is an upper bound on the amount of harvested energy that depends only on the ultimate stretch ratio. We conclude the work with detailed calculations of the optimal cycles for two commercially available elastic dielectrics.
△ Less
Submitted 13 March, 2014;
originally announced March 2014.
-
Performance of soft dielectric laminated composites
Authors:
Massimiliano Gei,
Roberta Springhetti,
Eliana Bortot
Abstract:
This paper contains a thorough investigation of the performance of electrically activated layered soft dielectric composite actuators under plane deformation. Noting that the activation can be induced controlling either the voltage or the surface charge, the overall behaviour of the system is obtained via homogenization at large strains taking either the macroscopic electric field or the macroscop…
▽ More
This paper contains a thorough investigation of the performance of electrically activated layered soft dielectric composite actuators under plane deformation. Noting that the activation can be induced controlling either the voltage or the surface charge, the overall behaviour of the system is obtained via homogenization at large strains taking either the macroscopic electric field or the macroscopic electric displacement field as independent electrical variable. The performance of a two-phase composite actuator compared to that of the homogeneous case is highlighted for few boundary-value problems and for different values of stiffness and permittivity ratios between constituents being significant for applications, where the soft matrix is reinforced by a relatively small volume fraction of a stiff and high-permittivity phase. For charge-controlled devices, it is shown that some composite layouts admit, on one hand, the occurrence of pull-in/snap-through instabilities that can be exploited to design release-actuated systems, on the other, the possibility of thickening at increasing surface charge density.
△ Less
Submitted 1 November, 2013;
originally announced November 2013.
-
The role of electrostriction on the stability of dielectric elastomer actuators
Authors:
M. Gei,
S. Colonnelli,
R. Springhetti
Abstract:
In the field of soft dielectric elastomers, the notion electrostriction indicates the dependency of the permittivity on strain. The present paper is aimed at investigating the effects of electrostriction onto the stability behaviour of homogeneous electrically activated dielectric elastomer actuators. In particular, three objectives are pursued and achieved: i) the description of the phenomenon wi…
▽ More
In the field of soft dielectric elastomers, the notion electrostriction indicates the dependency of the permittivity on strain. The present paper is aimed at investigating the effects of electrostriction onto the stability behaviour of homogeneous electrically activated dielectric elastomer actuators. In particular, three objectives are pursued and achieved: i) the description of the phenomenon within the general nonlinear theory of electroelasticity; ii) the application of the recently proposed theory of bifurcation for electroelastic bodies in order to determine its role on the onset of electromechanical and diffuse-mode instabilities in prestressed or prestretched dielectric layers; iii) the analysis of band-localization instability in homogeneous dielectric elastomers. Results for a typical soft acrylic elastomer show that electrostriction is responsible for an enhancement towards diffuse-mode instability, while it represents a crucial property - necessarily to be taken into account - in order to provide a solution to the problem of electromechanical band-localization, that can be interpreted as a possible reason of electric breakdown. A comparison between the buckling stresses of a mechanical compressed slab and the electrically activated counterpart concludes the paper.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
