-
Long-Term Stability of Graphene/c-Si Schottky-Junction Solar Cells
Authors:
Djordje Jovanović,
Miloš Petrović,
Tijana Tomašević-Ilić,
Aleksandar Matković,
Matevž Bokalič,
Marko Spasenović,
Konstantinos Rogdakis,
Emmannuel Kymakis,
Dragan Knežević,
Lucio Cinà,
Radoš Gajić
Abstract:
A long operational lifetime is required for the use of solar cells in real-life photovoltaic applications. The optimization of operational lifetimes is achieved through understanding the inherent degradation phenomena in solar cells. In this study, graphene/Si Schottky-junction solar cells were produced, utilizing liquid-phase-exfoliated graphene as an active surface. The operational and interface…
▽ More
A long operational lifetime is required for the use of solar cells in real-life photovoltaic applications. The optimization of operational lifetimes is achieved through understanding the inherent degradation phenomena in solar cells. In this study, graphene/Si Schottky-junction solar cells were produced, utilizing liquid-phase-exfoliated graphene as an active surface. The operational and interface stability of these solar cells over a period of 5 years in ambient conditions (following ISOS-D protocols: dark storage/shelf life) was examined, and the origin of their degradation was reported. It was found that the dominant degradation mechanism could be attributed to the degradation of silver contacts. This was indicated by a decrease in shunt resistance, an increase in the ideality factor (due to a higher carrier recombination), and a constant defect density in graphene films for up to 4 years. Measurements across the solar cell's active area during the 5-year period revealed neither significant spatial inhomogeneity, nor shunt channel defects.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Graphene-based chemiresistive gas sensors
Authors:
Marko Spasenović,
Stevan Andrić,
Tijana Tomašević-Ilić
Abstract:
Gas sensors are an indispensable ingredient of the modern society, finding their use across a range of industries that include manufacturing, environmental protection and control, automotive and others. Novel applications have been arising, requiring new materials. Here we outline the principles of gas sensing with a focus on chemiresistive-type devices. We follow up with a summary of the advantag…
▽ More
Gas sensors are an indispensable ingredient of the modern society, finding their use across a range of industries that include manufacturing, environmental protection and control, automotive and others. Novel applications have been arising, requiring new materials. Here we outline the principles of gas sensing with a focus on chemiresistive-type devices. We follow up with a summary of the advantages and use of graphene as a gas sensing material, discussing the properties of different graphene production methods. Finally, we showcase some recent results that point to novel applications of graphene-based gas sensors, including respiration monitoring and finger proximity detection.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Ultrafast humidity sensor based on liquid phase exfoliated graphene
Authors:
Stevan Andrić,
Tijana Tomašević-Ilić,
Marko V. Bošković,
Milija Sarajlić,
Dana Vasiljević-Radović,
Milče. M. Smiljanić,
Marko Spasenović
Abstract:
Humidity sensing is important to a variety of technologies and industries, ranging from environmental and industrial monitoring to medical applications. Although humidity sensors abound, few available solutions are thin, transparent, compatible with large-area sensor production and flexible, and almost none are fast enough to perform human respiration monitoring through breath detection or real-ti…
▽ More
Humidity sensing is important to a variety of technologies and industries, ranging from environmental and industrial monitoring to medical applications. Although humidity sensors abound, few available solutions are thin, transparent, compatible with large-area sensor production and flexible, and almost none are fast enough to perform human respiration monitoring through breath detection or real-time finger proximity monitoring via skin humidity sensing. This work describes chemiresistive graphene-based humidity sensors produced in few steps with facile liquid phase exfoliation (LPE) followed by Langmuir-Blodgett assembly that enables active areas of practically any size. The graphene sensors provide a unique mix of performance parameters, exhibiting resistance changes up to 10% with varying humidity, linear performance over relative humidity (RH) levels between 8% and 95%, weak response to other constituents of air, flexibility, transparency of nearly 80%, and response times of 30 ms. The fast response to humidity is shown to be useful for respiration monitoring and real-time finger proximity detection, with potential applications in flexible touchless interactive panels.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Low-friction, wear-resistant, and electrically homogeneous multilayer graphene grown by chemical vapor deposition on molybdenum
Authors:
Borislav Vasić,
Uroš Ralević,
Katarina Cvetanović-Zobenica,
Milče M. Smiljanić,
Radoš Gajić,
Marko Spasenović,
Sten Vollebregt
Abstract:
Chemical vapour deposition (CVD) is a promising method for producing large-scale graphene (Gr). Nevertheless, microscopic inhomogeneity of Gr grown on traditional metal substrates such as copper or nickel results in a spatial variation of Gr properties due to long wrinkles formed when the metal substrate shrinks during the cooling part of the production cycle. Recently, molybdenum (Mo) has emerged…
▽ More
Chemical vapour deposition (CVD) is a promising method for producing large-scale graphene (Gr). Nevertheless, microscopic inhomogeneity of Gr grown on traditional metal substrates such as copper or nickel results in a spatial variation of Gr properties due to long wrinkles formed when the metal substrate shrinks during the cooling part of the production cycle. Recently, molybdenum (Mo) has emerged as an alternative substrate for CVD growth of Gr, mainly due to a better matching of the thermal expansion coefficient of the substrate and Gr. We investigate the quality of multilayer Gr grown on Mo and the relation between Gr morphology and nanoscale mechanical and electrical properties, and spatial homogeneity of these parameters. With atomic force microscopy (AFM) based scratching, Kelvin probe force microscopy, and conductive AFM, we measure friction and wear, surface potential, and local conductivity, respectively. We find that Gr grown on Mo is free of large wrinkles that are common with growth on other metals, although it contains a dense network of small wrinkles. We demonstrate that as a result of this unique and favorable morphology, the Gr studied here has low friction, high wear resistance, and excellent homogeneity of electrical surface potential and conductivity.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Reducing sheet resistance of self-assembled transparent graphene films by defect patching and doping with UV/ozone treatment
Authors:
Tijana Tomašević-Ilić,
Djordje Jovanović,
Igor Popov,
Rajveer Fandan,
Jorge Pedrós,
Marko Spasenović,
Radoš Gajić
Abstract:
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that re…
▽ More
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that reduces sheet resistance of LBSA graphene threefold, while preserving the high optical transparency. The effect of such treatment on our films is opposite to the effect it has on mechanically exfoliated or CVD films, where UV/ozone creates additional defects in the graphene plane, increasing sheet resistance. Raman scattering shows that exposure to UV/ozone reduces the defect density in LBSA graphene, where edges are the dominant defect type. FTIR spectroscopy indicates binding of oxygen to the graphene lattice during exposure to ozone. In addition, work function measurements reveal that the treatment dopes the LBSA film, making it more conductive. Such defect patching paired with doping leads to an accessible way of improving the transparent conductor performance of LBSA graphene, making solution-processed thin films a candidate for industrial use.
△ Less
Submitted 16 August, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Field effect and local gating in nitrogen-terminated nanopores (NtNP) and nanogaps (NtNG) in graphene
Authors:
Ivana Djurišić,
Miloš S. Dražić,
Aleksandar Ž. Tomović,
Marko Spasenović,
Željko Šljivančanin,
Vladimir P. Jovanović,
Radomir Zikic
Abstract:
Single-molecule biosensing, with a promise of being applied in protein and DNA sequencing, could be achieved using tunneling current approach. Electrode-molecule-electrode tunneling current critically depends on whether molecular levels contribute to electronic transport or not. Here we found employing DFT and Non-Equilibrium Green's Function formalism that energies of benzene molecular levels pla…
▽ More
Single-molecule biosensing, with a promise of being applied in protein and DNA sequencing, could be achieved using tunneling current approach. Electrode-molecule-electrode tunneling current critically depends on whether molecular levels contribute to electronic transport or not. Here we found employing DFT and Non-Equilibrium Green's Function formalism that energies of benzene molecular levels placed between graphene electrodes are strongly influenced by electrode termination. Termination-dependent dipoles formed at the electrode ends induce in-gap field effect that is responsible for shifting of molecular levels. We show that the HOMO is closest to Fermi energy for nitrogen-terminated nanogaps (NtNGs) and nanopores (NtNPs), promoting them as strong candidates for single-molecule sensing applications.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
ssDNA sequencing by rectification
Authors:
Ivana Djurišić,
Miloš S. Dražić,
Aleksandar Ž. Tomović,
Marko Spasenović,
Vladimir P. Jovanović,
Radomir Zikic
Abstract:
Fast, reliable and inexpensive DNA sequencing is an important pursuit in healthcare, especially in personalized medicine with possible deep societal impacts. Despite significant progress of various nanopore-based sequencing configurations, challenges remain in resolution (due to thermal fluctuations or to sensitivity to molecular orientation) and speed, which are calling for new approaches. Here w…
▽ More
Fast, reliable and inexpensive DNA sequencing is an important pursuit in healthcare, especially in personalized medicine with possible deep societal impacts. Despite significant progress of various nanopore-based sequencing configurations, challenges remain in resolution (due to thermal fluctuations or to sensitivity to molecular orientation) and speed, which are calling for new approaches. Here we propose a sequencing protocol for DNA translocation through a nanopore with side-embedded N-terminated carbon nanotube electrodes. Employing DFT and Non-Equilibrium Green's Function formalism, we show that the rectification ratio (response to square pulses of alternating bias) bears high nucleobase specificity. The rectification arises due to bias-dependent resistance asymmetry on the deoxyribonucleotide-electrode interfaces. The asymmetry induces molecular charging and HOMO pinning to the electrochemical potential of one of the electrodes, assisted by an in-gap electric field effect caused by dipoles at the terminated electrode ends. This sequencing protocol is sensitive, selective with orders of magnitude, has high resolution, and it is robust to molecular orientation.
△ Less
Submitted 10 October, 2018; v1 submitted 3 July, 2018;
originally announced July 2018.
-
Multilayer graphene condenser microphone
Authors:
Dejan Todorović,
Aleksandar Matković,
Marijana Milićević,
Đorđe Jovanović,
Radoš Gajić,
Iva Salom,
Marko Spasenović
Abstract:
Vibrating membranes are the cornerstone of acoustic technology, forming the backbone of modern loudspeakers and microphones. Acoustic performance of condenser microphone is derived mainly from the membrane's size and achievable static tension. The widely studied and available nickel has been the one of dominant membrane material for several decades. In this paper we introduce multilayer graphene a…
▽ More
Vibrating membranes are the cornerstone of acoustic technology, forming the backbone of modern loudspeakers and microphones. Acoustic performance of condenser microphone is derived mainly from the membrane's size and achievable static tension. The widely studied and available nickel has been the one of dominant membrane material for several decades. In this paper we introduce multilayer graphene as membrane material for a condenser microphone. The graphene device outperforms a high end commercial nickel-based microphone over a significant part of the acoustic spectrum, with a larger than 10 dB enhancement of sensitivity. Our experimental results are supported with numerical simulations, which show that a 300 layer thick graphene membrane under maximum tension would offer excellent extension of the frequency range, up to 1 MHz, with similar sensitivity as commercial condenser microphones.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Long distance manipulation of a levitated nanoparticle in high vacuum
Authors:
Pau Mestres,
Johann Berthelot,
Marko Spasenović,
Jan Gieseler,
Lukas Novotny,
Romain Quidant
Abstract:
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here we report a novel approach based on a mobile optical trap operated under feedback con…
▽ More
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here we report a novel approach based on a mobile optical trap operated under feedback control that enables long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.
△ Less
Submitted 14 October, 2015; v1 submitted 8 May, 2015;
originally announced May 2015.
-
Nonlinear mode-coupling and synchronization of a vacuum-trapped nanoparticle
Authors:
Jan Gieseler,
Marko Spasenovic,
Lukas Novotny,
Romain Quidant
Abstract:
We study the dynamics of a laser-trapped nanoparticle in high vacuum. Using parametric coupling to an external excitation source, the linewidth of the nanoparticle's oscillation can be reduced by three orders of magnitude. We show that the oscillation of the nanoparticle and the excitation source are synchronized, exhibiting a well-defined phase relationship. Furthermore, the external source can b…
▽ More
We study the dynamics of a laser-trapped nanoparticle in high vacuum. Using parametric coupling to an external excitation source, the linewidth of the nanoparticle's oscillation can be reduced by three orders of magnitude. We show that the oscillation of the nanoparticle and the excitation source are synchronized, exhibiting a well-defined phase relationship. Furthermore, the external source can be used to controllably drive the nanoparticle into the nonlinear regime, thereby generating strong coupling between the different translational modes of the nanoparticle. Our work contributes to the understanding of the nonlinear dynamics of levitated nanoparticles in high vacuum and paves the way for studies of pattern formation, chaos, and stochastic resonance.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
-
Plasmon scattering from single sub-wavelength holes
Authors:
N. Rotenberg,
M. Spasenovic,
T. L. Krijger,
B. le Feber,
F. J. Garcıa de Abajo,
L. Kuipers
Abstract:
We map the complex electric fields associated with the scattering of surface plasmon polaritons by single sub-wavelength holes of different sizes in thick gold films. We identify and quantify the different modes associated with this event, including a radial surface wave with an angularly isotropic amplitude. This wave is shown to arise from the out-of-plane electric dipole induced in the hole, an…
▽ More
We map the complex electric fields associated with the scattering of surface plasmon polaritons by single sub-wavelength holes of different sizes in thick gold films. We identify and quantify the different modes associated with this event, including a radial surface wave with an angularly isotropic amplitude. This wave is shown to arise from the out-of-plane electric dipole induced in the hole, and we quantify the corresponding polarizability, which is in excellent agreement with electromagnetic theory. Time-resolved measurements reveal a time-delay of 38? +/- 18 fs between the surface plasmon polariton and the radial wave, which we attribute to the interaction with a broad hole resonance.
△ Less
Submitted 17 December, 2012;
originally announced December 2012.
-
Optical nano-imaging of gate-tuneable graphene plasmons
Authors:
Jianing Chen,
Michela Badioli,
Pablo Alonso-González,
Suko Thongrattanasiri,
Florian Huth,
Johann Osmond,
Marko Spasenovic,
Alba Centeno,
Amaia Pesquera,
Philippe Godignon,
Amaia Zurutuza,
Nicolas Camara,
Javier Garcia de Abajo,
Rainer Hillenbrand,
Frank Koppens
Abstract:
The ability to manipulate optical fields and the energy flow of light is central to modern information and communication technologies, as well as quantum information processing schemes. However, as photons do not possess charge, controlling them efficiently by electrical means has so far proved elusive. A promising way to achieve electric control of light could be through plasmon polaritons - coup…
▽ More
The ability to manipulate optical fields and the energy flow of light is central to modern information and communication technologies, as well as quantum information processing schemes. However, as photons do not possess charge, controlling them efficiently by electrical means has so far proved elusive. A promising way to achieve electric control of light could be through plasmon polaritons - coupled excitations of photons and charge carriers - in graphene. In this two-dimensional sheet of carbon atoms, it is expected that plasmon polaritons and their associated optical fields can be readily tuned electrically by varying the graphene carrier density. While optical graphene plasmon resonances have recently been investigated spectroscopically, no experiments so far have directly resolved propagating plasmons in real space. Here, we launch and detect propagating optical plasmons in tapered graphene nanostructures using near-field scattering microscopy with infrared excitation light. We provide real-space images of plasmonic field profiles and find that the extracted plasmon wavelength is remarkably short - over 40 times smaller than the wavelength of illumination. We exploit this strong optical field confinement to turn a graphene nanostructure into a tunable resonant plasmonic cavity with extremely small mode volume. The cavity resonance is controlled in-situ by gating the graphene, and in particular, complete switching on and off of the plasmon modes is demonstrated, thus paving the way towards graphene-based optical transistors. This successful alliance between nanoelectronics and nano-optics enables the development of unprecedented active subwavelength-scale optics and a plethora of novel nano-optoelectronic devices and functionalities, such as tunable metamaterials, nanoscale optical processing and strongly enhanced light-matter interactions for quantum devices and (bio)sensors.
△ Less
Submitted 26 February, 2012; v1 submitted 22 February, 2012;
originally announced February 2012.
