-
Beyond the random phase approximation for calculating Curie temperatures in ferromagnets: application to Fe, Ni, Co and monolayer CrI3
Authors:
Varun Rajeev Pavizhakumari,
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
The magnetic properties of solids are typically analyzed in terms of Heisenberg models where the electronic structure is approximated by interacting localized spins. However, even in such models the evaluation of thermodynamic properties constitutes a major challenge and is usually handled by a mean field decoupling scheme. The random phase approximation (RPA) comprises a common approach and is of…
▽ More
The magnetic properties of solids are typically analyzed in terms of Heisenberg models where the electronic structure is approximated by interacting localized spins. However, even in such models the evaluation of thermodynamic properties constitutes a major challenge and is usually handled by a mean field decoupling scheme. The random phase approximation (RPA) comprises a common approach and is often applied to evaluate critical temperatures although it is well known that the method is only accurate well below the critical temperature. In the present work we compare the performance of the RPA with a different decoupling scheme proposed by Callen as well as the mean field decoupling of interacting Holstein-Primakoff (HP) magnons. We consider three-dimensional (3D) as well as two-dimensional (2D) model systems where the Curie temperature is governed by anisotropy. In 3D, the Callen method is the most accurate in the classical limit, and we show that the Callen decoupling produces the best agreement with experiments for bcc Fe, fcc Ni and fcc Co with exchange interactions obtained from first principles. In contrast, for low spin systems where a quantum mechanical treatment in pertinent, the HP and RPA methods appear are superior to the Callen decoupling. In 2D systems with magnetic order driven by single-ion anisotropy, it is shown that HP fails rather dramatically and both RPA and Callen approaches severely overestimates Curie temperatures. The most accurate approach is then constructed by combining RPA with the Callen decoupling of single-ion anisotropy, which yields the correct lack of order for S=1/2. We exemplify this by the case of monolayer CrI3 using exchange constant extracted from experiments.
△ Less
Submitted 23 October, 2024; v1 submitted 1 May, 2024;
originally announced May 2024.
-
Minority magnons and mode branching in monolayer Fe$_3$GeTe$_2$
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We predict the presence of minority magnons in monolayer Fe$_3$GeTe$_2$ using first principles calculations. Minority magnons constitute a new type of collective magnetic excitation which increase the magnetic moment -- contrary to ordinary (majority) magnons which lower it -- giving rise to spin-raising poles in the dynamic susceptibility $χ^{-+}(ω)$. The presence of such quasi-particles is made…
▽ More
We predict the presence of minority magnons in monolayer Fe$_3$GeTe$_2$ using first principles calculations. Minority magnons constitute a new type of collective magnetic excitation which increase the magnetic moment -- contrary to ordinary (majority) magnons which lower it -- giving rise to spin-raising poles in the dynamic susceptibility $χ^{-+}(ω)$. The presence of such quasi-particles is made possible by the nontrivial ferromagnetic band structure of Fe$_3$GeTe$_2$. We calculate the susceptibility using time-dependent density functional theory and perform a detailed mode analysis, which allows us to identify and investigate individual magnon modes as well as the Stoner excitations that constitute the many-body spectrum. The analysis reveals a plethora of both majority and minority excitations, which in addition to the main magnon branches include both satellite, valley and spin-inversion magnons thanks to the electron itinerancy of the system. Crucially, the analysis allows us to separate peaks of a coherent collective nature from those of mixed magnon/Stoner nature. To this end, we predict that the lowest energy minority magnon mode of monolayer Fe$_3$GeTe$_2$ indeed constitutes a coherent collective quasi-particle at long wavelengths and introduce a simplistic gaussian model for the observed minority magnon enhancement. The underlying physics is in no way restricted to Fe$_3$GeTe$_2$, and minority magnons are thus expected to be observable in other complex ferromagnetic materials as well.
△ Less
Submitted 1 August, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
GPAW: An open Python package for electronic-structure calculations
Authors:
Jens Jørgen Mortensen,
Ask Hjorth Larsen,
Mikael Kuisma,
Aleksei V. Ivanov,
Alireza Taghizadeh,
Andrew Peterson,
Anubhab Haldar,
Asmus Ougaard Dohn,
Christian Schäfer,
Elvar Örn Jónsson,
Eric D. Hermes,
Fredrik Andreas Nilsson,
Georg Kastlunger,
Gianluca Levi,
Hannes Jónsson,
Hannu Häkkinen,
Jakub Fojt,
Jiban Kangsabanik,
Joachim Sødequist,
Jouko Lehtomäki,
Julian Heske,
Jussi Enkovaara,
Kirsten Trøstrup Winther,
Marcin Dulak,
Marko M. Melander
, et al. (22 additional authors not shown)
Abstract:
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually indepen…
▽ More
We review the GPAW open-source Python package for electronic structure calculations. GPAW is based on the projector-augmented wave method and can solve the self-consistent density functional theory (DFT) equations using three different wave-function representations, namely real-space grids, plane waves, and numerical atomic orbitals. The three representations are complementary and mutually independent and can be connected by transformations via the real-space grid. This multi-basis feature renders GPAW highly versatile and unique among similar codes. By virtue of its modular structure, the GPAW code constitutes an ideal platform for implementation of new features and methodologies. Moreover, it is well integrated with the Atomic Simulation Environment (ASE) providing a flexible and dynamic user interface. In addition to ground-state DFT calculations, GPAW supports many-body GW band structures, optical excitations from the Bethe-Salpeter Equation (BSE), variational calculations of excited states in molecules and solids via direct optimization, and real-time propagation of the Kohn-Sham equations within time-dependent DFT. A range of more advanced methods to describe magnetic excitations and non-collinear magnetism in solids are also now available. In addition, GPAW can calculate non-linear optical tensors of solids, charged crystal point defects, and much more. Recently, support of GPU acceleration has been achieved with minor modifications of the GPAW code thanks to the CuPy library. We end the review with an outlook describing some future plans for GPAW.
△ Less
Submitted 16 April, 2024; v1 submitted 23 October, 2023;
originally announced October 2023.
-
Plane wave implementation of the magnetic force theorem for magnetic exchange constants: Application to bulk Fe, Co and Ni
Authors:
Frederik Durhuus,
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We present a plane wave implementation of the magnetic force theorem, which provides a first principles framework for extracting exchange constants parameterizing a classical Heisenberg model description of magnetic materials. It is shown that the full microscopic exchange tensor may be expressed in terms of the static Kohn-Sham susceptibility tensor and the exchange-correlation magnetic field. Th…
▽ More
We present a plane wave implementation of the magnetic force theorem, which provides a first principles framework for extracting exchange constants parameterizing a classical Heisenberg model description of magnetic materials. It is shown that the full microscopic exchange tensor may be expressed in terms of the static Kohn-Sham susceptibility tensor and the exchange-correlation magnetic field. This formulation allows one to define arbitrary magnetic sites localized to predefined spatial regions, hence rendering the problem of finding Heisenberg parameters independent of any orbital decomposition of the problem. The susceptibility is calculated in a plane wave basis, which allows for systematic convergence with respect to unoccupied bands and spatial representation. We then apply the method to the well-studied problem of calculating adiabatic spin wave spectra for bulk Fe, Co and Ni, finding good agreement with previous calculations. In particular, we utilize the freedom of defining magnetic sites to show that the calculated Heisenberg parameters are robust towards changes in the definition of magnetic sites. This demonstrates that the magnetic sites can be regarded as well-defined and thus asserts the relevance of the Heisenberg model description despite the itinerant nature of the magnetic state.
△ Less
Submitted 11 January, 2023; v1 submitted 8 April, 2022;
originally announced April 2022.
-
Magnons in antiferromagnetic bcc-Cr and Cr$_2$O$_3$ from time-dependent density functional theory
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We apply time-dependent density functional theory to calculate the transverse magnetic susceptibility of bcc-Cr and Cr$_2$O$_3$, which constitute prototypical examples of antiferromagnets with itinerant and localized magnetic moments respectively. The exchange-correlation kernel is rescaled in order to enforce the Goldstone condition and the magnon dispersion relations are extracted based on a sym…
▽ More
We apply time-dependent density functional theory to calculate the transverse magnetic susceptibility of bcc-Cr and Cr$_2$O$_3$, which constitute prototypical examples of antiferromagnets with itinerant and localized magnetic moments respectively. The exchange-correlation kernel is rescaled in order to enforce the Goldstone condition and the magnon dispersion relations are extracted based on a symmetry analysis relying on the generalized Onsager relation. Doing so, our calculations yield the characteristic linear magnon dispersion of antiferromagnets in the long wavelength limit. In the case of Cr$_2$O$_3$, we find that the adiabatic local density approximation yields a good qualitative agreement with the measured dispersion, but overestimates the magnon velocity and bandwidth by a factor of two. Including a Hubbard correction improves the magnon velocity, but at the expense of the overall qualitative agreement with the experimental magnon dispersion. For bcc-Cr we find a sharp acoustic magnon mode at low energies with a velocity in agreement with previously reported values. At higher energies, the acoustic magnon mode becomes subject to strong Landau damping and rapidly vanishes once it enters the Stoner continuum. In addition to the acoustic magnon mode, we also observe an additional collective mode along the $Γ\rightarrow\mathrm{R}$ direction with an energy of $\sim$ 1 eV, which is located inside the Stoner continuum, but appears to elude the effect of Landau damping.
△ Less
Submitted 20 July, 2022; v1 submitted 9 March, 2022;
originally announced March 2022.
-
Influence of static correlation on the magnon dynamics of an itinerant ferromagnet with competing exchange interactions -- a first principles study of MnBi
Authors:
Thorbjørn Skovhus,
Thomas Olsen,
Henrik M. Rønnow
Abstract:
We present first principles calculations of the dynamic susceptibility in strained and doped ferromagnetic MnBi using time-dependent density functional theory. In spite of being a metal, MnBi exhibits signatures of strong correlation and a proper description in the framework of density functional theory requires Hubbard corrections to the Mn $d$-orbitals. To permit calculations of the dynamic susc…
▽ More
We present first principles calculations of the dynamic susceptibility in strained and doped ferromagnetic MnBi using time-dependent density functional theory. In spite of being a metal, MnBi exhibits signatures of strong correlation and a proper description in the framework of density functional theory requires Hubbard corrections to the Mn $d$-orbitals. To permit calculations of the dynamic susceptibility with Hubbard corrections applied to the ground state electronic structure, we use a consistent rescaling of the exchange-correlation kernel maintaining the delicate balance between the magnon dispersion and the Stoner continuum. We find excellent agreement with the experimentally observed magnon dispersion for pristine MnBi and show that the material undergoes a phase transition to helical order under application of either doping or strain. The presented methodology paves the way for future LR-TDDFT studies of magnetic phase transitions, also for the wide range of materials with pronounced static correlation effects that are not accounted for at the LDA level.
△ Less
Submitted 11 February, 2022; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Atomic Simulation Recipes -- a Python framework and library for automated workflows
Authors:
Morten Gjerding,
Thorbjørn Skovhus,
Asbjørn Rasmussen,
Fabian Bertoldo,
Ask Hjorth Larsen,
Jens Jørgen Mortensen,
Kristian Sommer Thygesen
Abstract:
The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while keeping track of the data provenance. The ASR…
▽ More
The Atomic Simulation Recipes (ASR) is an open source Python framework for working with atomistic materials simulations in an efficient and sustainable way that is ideally suited for high-throughput projects. Central to ASR is the concept of a Recipe: a high-level Python script that performs a well defined simulation task robustly and accurately while keeping track of the data provenance. The ASR leverages the functionality of the Atomic Simulation Environment (ASE) to interface with external simulation codes and attain a high abstraction level. We provide a library of Recipes for common simulation tasks employing density functional theory and many-body perturbation schemes. These Recipes utilize the GPAW electronic structure code, but may be adapted to other simulation codes with an ASE interface. Being independent objects with automatic data provenance control, Recipes can be freely combined through Python scripting giving maximal freedom for users to build advanced workflows. ASR also implements a command line interface that can be used to run Recipes and inspect results. The ASR Migration module helps users maintain their data while the Database and App modules makes it possible to create local databases and present them as customized web pages.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Dynamic transverse magnetic susceptibility in the projector augmented-wave method. Application to Fe, Ni, and Co
Authors:
Thorbjørn Skovhus,
Thomas Olsen
Abstract:
We present a first principles implementation of the dynamic transverse magnetic susceptibility in the framework of linear response time-dependent density functional theory. The dynamic susceptibility allows one to obtain the magnon dispersion as well as magnon lifetimes for a particular material, which strongly facilitates the interpretation of inelastic neutron scattering experiments as well as o…
▽ More
We present a first principles implementation of the dynamic transverse magnetic susceptibility in the framework of linear response time-dependent density functional theory. The dynamic susceptibility allows one to obtain the magnon dispersion as well as magnon lifetimes for a particular material, which strongly facilitates the interpretation of inelastic neutron scattering experiments as well as other spectroscopic techniques. We apply the method to Fe, Ni, and Co and perform a thorough convergence analysis with respect the basis set size, $k$-point sampling, spectral smearing and unoccupied bands. In particular, it is shown that while the gap error (acoustic magnon energy at $\mathbf{q}=\mathbf{0}$) is highly challenging to converge, the spin-wave stiffness and the dispersion relation itself are much less sensitive to convergence parameters. Our final results agrees well with experimentally extracted magnon dispersion relations except for Ni, where it is well-known that the exchange splitting energy is poorly represented in the local density approximation. We also find good agreement with previous first principles calculations and explain how differences in the calculated dispersion relations can arise from subtle differences in computational approaches.
△ Less
Submitted 12 May, 2021; v1 submitted 9 March, 2021;
originally announced March 2021.
-
Recent Progress of the Computational 2D Materials Database (C2DB)
Authors:
M. N. Gjerding,
A. Taghizadeh,
A. Rasmussen,
S. Ali,
F. Bertoldo,
T. Deilmann,
U. P. Holguin,
N. R. Knøsgaard,
M. Kruse,
S. Manti,
T. G. Pedersen,
T. Skovhus,
M. K. Svendsen,
J. J. Mortensen,
T. Olsen,
K. S. Thygesen
Abstract:
The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayer…
▽ More
The C2DB is a highly curated open database organizing a wealth of computed properties for more than 4000 atomically thin two-dimensional (2D) materials. Here we report on new materials and properties that were added to the database since its first release in 2018. The set of new materials comprise several hundred monolayers exfoliated from experimentally known layered bulk materials, (homo)bilayers in various stacking configurations, native point defects in semiconducting monolayers, and chalcogen/halogen Janus monolayers. The new properties include exfoliation energies, Bader charges, spontaneous polarisations, Born charges, infrared polarisabilities, piezoelectric tensors, band topology invariants, exchange couplings, Raman- and second harmonic generation spectra. We also describe refinements of the employed material classification schemes, upgrades of the computational methodologies used for property evaluations, as well as significant enhancements of the data documentation and provenance. Finally, we explore the performance of Gaussian process-based regression for efficient prediction of mechanical and electronic materials properties. The combination of open access, detailed documentation, and extremely rich materials property data sets make the C2DB a unique resource that will advance the science of atomically thin materials.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
