Showing 1–4 of 4 results for author: Singh, N D

Spectrum Selective Interfaces and Materials towards Non-photothermal Saltwater Evaporation: Demonstration with a White Ceramic Wick

Authors: Navindra D. Singh, James Leung, Ji Feng, Alma K. González-Alcalde, Arial Tolentino, David Tuft, Juchen Guo, Luat T. Vuong

Abstract: Most solar desalination efforts are photothermal: they evaporate water with ``black'' materials that absorb as much sunlight as possible. Such ``brine-boiling'' methods are limited by the high thermal mass of water, i.e., its capacity to store and release heat. Here, we study the light-enhanced evaporation by a hard, white, aluminum nitride wick, and propose a route to selectively target salt-wate… ▽ More Most solar desalination efforts are photothermal: they evaporate water with ``black'' materials that absorb as much sunlight as possible. Such ``brine-boiling'' methods are limited by the high thermal mass of water, i.e., its capacity to store and release heat. Here, we study the light-enhanced evaporation by a hard, white, aluminum nitride wick, and propose a route to selectively target salt-water bonds instead of bulk heating via deep-UV interactions. Through experiments and analyses that isolate the effects of light absorption and heating in aluminum nitride, we provide experimental evidence of a light-driven, spectrum-selective path to non-photothermal saltwater evaporation. Leverage of these light-matter interactions in white ceramic wicks may achieve low-cost, low-energy desalination, reduce the heat island effects of traditional solar technologies, and contribute to new cooling technologies where drought is also a concern. △ Less

Submitted 30 June, 2025; v1 submitted 28 May, 2025; originally announced May 2025.

Comments: 18 pages, 5 figures, submitted to ACS Advanced Materials & Interfaces, 70 references

Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of th… ▽ More Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: A. Nanostructures B. Vapor deposition C. Electron microscopy C. Raman spectroscopy C. X-ray diffraction

Journal ref: Materials Research Bulletin, Volume 45, Issue 9, September 2010, Pages 1189-1193

Site selective synthesis of in situ Ni filled multiwalled carbon nanotubes using Ni(salen) as a catalyst source

Authors: Joydip Sengupta, Avijit Jana, N D Pradeep Singh, C Mitra, Chacko Jacob

Abstract: The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth m… ▽ More The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth mechanism and exhibit a multi walled structure with partial Ni filling. The high quality of the Ni filled nanotubes is evidenced by Raman spectroscopy. The magnetic properties of Ni filled nanotubes were analyzed using a superconducting quantum interference device which revealed their ferromagnetic behavior with large coercivity. A scalable as well as site selective growth of high quality Ni filled carbon nanotubes is achieved by a simple photolithographic method. △ Less

Submitted 13 August, 2019; originally announced August 2019.

Comments: multiwalled carbon nanotubes,chemical vapor deposition,Ni(salen),photoresist,magnetic properties,coercivity

Journal ref: Nanotechnology, 2010, Volume 21, Number 41, pp 415605

Lithographically defined site-selective growth of Fe filled multi-walled carbon nanotubes using a modified photoresist

Authors: Joydip Sengupta, Avijit Jana, N. D. Pradeep Singh, Chacko Jacob

Abstract: Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Tr… ▽ More Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Transmission electron microscopy shows that the nanotubes have a multi-walled structure with partial Fe filling. A site-selective growth of partially Fe filled MWCNTs is achieved by a simple photolithographic route. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: Filled CNT, CVD, Partial filling, Photolithography

Journal ref: Carbon, Volume 48, Issue 8, July 2010, Pages 2371-2375