-
Towards a Systematic Improvement of the Fixed-Node Approximation in Diffusion Monte Carlo for Solids -- A Case Study In Diamond
Authors:
Anouar Benali,
Kevin Gasperich,
Kenneth D. Jordan,
Thomas Applencourt,
Ye Luo,
M. Chandler Bennett,
Jaron T. Krogel,
Luke Shulenburger,
Paul R. C. Kent,
Pierre-François Loos,
Anthony Scemama,
Michel Caffarel
Abstract:
While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and sy…
▽ More
While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and systematically improved. Here, we present a computational method that produces trial wavefunctions with systematically improvable nodes for DMC calculations of periodic solids. These trial wavefunctions are efficiently generated with the configuration interaction using a perturbative selection made iteratively (CIPSI) method. A simple protocol in which both exact and approximate results for finite supercells are used to extrapolate to the thermodynamic limit is introduced.
△ Less
Submitted 29 October, 2020; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Systematic Comparison and Cross-validation of Fixed-Node Diffusion Monte Carlo and Phaseless Auxiliary-Field Quantum Monte Carlo in Solids
Authors:
Fionn D. Malone,
Anouar Benali,
Miguel A. Morales,
Michel Caffarel,
P. R. C. Kent,
Luke Shulenburger
Abstract:
Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multi-determinant trial wave functions employed in both approaches are generated using the configuration interact…
▽ More
Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multi-determinant trial wave functions employed in both approaches are generated using the configuration interaction using a perturbative selection made iteratively (CIPSI) technique. Complete basis set full configuration interaction (CBS-FCI) energies estimated with CIPSI are used as a reference in this comparative study between DMC and AFQMC. By focusing on a set of canonical finite size solid state systems, we show that both QMC methods can be made to systematically converge towards the same energy once basis set effects and systematic biases have been removed. AFQMC shows a much smaller dependence on the trial wavefunction than DMC while simultaneously exhibiting a much larger basis set dependence. We outline some of the remaining challenges and opportunities for improving these approaches.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
A new generation of effective core potentials from correlated calculations: 4s and 4p main group elements and first row additions
Authors:
Guangming Wang,
Abdulgani Annaberdiyev,
Cody A. Melton,
M. Chandler Bennett,
Luke Shulenburger,
Lubos Mitas
Abstract:
Recently, we developed a new method for generating effective core potentials (ECPs) using valence energy isospectrality with explicitly correlated all-electron (AE) excitations and norm-conservation criteria. We apply this methodology to the 3$^{rd}$-row main group elements, creating new correlation consistent effective core potentials (ccECPs) and also derive additional ECPs to complete the ccECP…
▽ More
Recently, we developed a new method for generating effective core potentials (ECPs) using valence energy isospectrality with explicitly correlated all-electron (AE) excitations and norm-conservation criteria. We apply this methodology to the 3$^{rd}$-row main group elements, creating new correlation consistent effective core potentials (ccECPs) and also derive additional ECPs to complete the ccECP table for H-Kr. For K and Ca, we develop Ne-core ECPs and for the $4p$ main group elements, we construct [Ar]$3d^{10}$-core potentials. Scalar relativistic effects are included in their construction. Our ccECPs reproduce AE spectra with significantly better accuracy than many existing pseudopotentials and show better overall consistency across multiple properties. The transferability of ccECPs is tested on monohydride and monoxide molecules over a range of molecular geometries. For the constructed ccECPs we also provide optimized DZ - 6Z valence Gaussian basis sets.
△ Less
Submitted 9 October, 2019; v1 submitted 19 July, 2019;
originally announced July 2019.
-
Towards a systematically improvable many-body description of antiferromagnetic iron oxide
Authors:
Joshua P Townsend,
Raymond C Clay III,
Thomas R Mattsson,
Eric Neuscamman,
Luning Zhao,
Ken Esler,
Ronald E Cohen,
Luke Shulenburger
Abstract:
We report variational and fixed-node diffusion quantum Monte Carlo (QMC) calculations of anti-ferromagnetic iron oxide (FeO) in the ground state B1 crystal structure. The goal of this study was a systematic investigation of the sensitivity of several ground state properties to a variety of QMC wave function generation techniques including advanced wave functions such as multi-determinant expansion…
▽ More
We report variational and fixed-node diffusion quantum Monte Carlo (QMC) calculations of anti-ferromagnetic iron oxide (FeO) in the ground state B1 crystal structure. The goal of this study was a systematic investigation of the sensitivity of several ground state properties to a variety of QMC wave function generation techniques including advanced wave functions such as multi-determinant expansions and backflow transformations. We found that the predicted lattice distortion was largely controlled by the choice of single particle orbitals used to construct the wave function, rather than by subsequent wave function optimization techniques within QMC. However, the absolute magnetic moment was remarkably insensitive to the method of wave function construction. QMC estimates of total spin density indicate that in addition to strong electronic correlation of the Fe $3d$ states, charge transfer may be an important but challenging piece of physics to accurately capture within existing QMC methods. Finally, we highlight the need for advanced and systematically improvable many-body wave functions suitable for accurately describing challenging real systems.
△ Less
Submitted 6 June, 2018; v1 submitted 4 June, 2018;
originally announced June 2018.
-
An efficient hybrid orbital representation for quantum Monte Carlo calculations
Authors:
Ye Luo,
Kenneth P. Esler,
Paul R. C. Kent,
Luke Shulenburger
Abstract:
The scale and complexity of quantum system to which real-space quantum Monte Carlo (QMC) can be applied in part depends on the representation and memory usage of the trial wavefunction. B-splines, the computationally most efficient basis set, can have memory requirements exceeding the capacity of a single computational node. This situation has traditionally forced a difficult choice of either usin…
▽ More
The scale and complexity of quantum system to which real-space quantum Monte Carlo (QMC) can be applied in part depends on the representation and memory usage of the trial wavefunction. B-splines, the computationally most efficient basis set, can have memory requirements exceeding the capacity of a single computational node. This situation has traditionally forced a difficult choice of either using slow internode communication or a potentially less accurate but smaller basis set such as Gaussians. Here, we introduce a hybrid representation of the single particle orbitals that combine a localized atomic basis set around atomic cores and B-splines in the interstitial regions to reduce the memory usage while retaining high speed of evaluation and either retaining or increasing overall accuracy. We present a benchmark calculation for NiO demonstrating a superior accuracy while using only one eighth the memory required for conventional B-splines. The hybrid orbital representation therefore expands the overall range of systems that can be practically studied with QMC.
△ Less
Submitted 18 May, 2018;
originally announced May 2018.
-
New generation of effective core potentials from correlated calculations: 3d transition metal series
Authors:
Abdulgani Annaberdiyev,
Guangming Wang,
Cody A. Melton,
M. Chandler Bennett,
Luke Shulenburger,
Lubos Mitas
Abstract:
Recently, we have introduced a new generation of effective core potentials (ECPs) designed for accurate correlated calculations but equally useful for a broad variety of approaches. The guiding principle has been the isospectrality of all-electron and ECP Hamiltonians for a subset of valence many-body states using correlated, nearly-exact calculations. Here we present such ECPs for the 3d transiti…
▽ More
Recently, we have introduced a new generation of effective core potentials (ECPs) designed for accurate correlated calculations but equally useful for a broad variety of approaches. The guiding principle has been the isospectrality of all-electron and ECP Hamiltonians for a subset of valence many-body states using correlated, nearly-exact calculations. Here we present such ECPs for the 3d transition series Sc to Zn with Ne-core, i.e, with semi-core 3s and 3p electrons in the valence space. Besides genuine many-body accuracy, the operators are simple, being represented by a few gaussians per symmetry channel with resulting potentials that are bounded everywhere. The transferability is checked on selected molecular systems over a range of geometries. The ECPs show a high overall accuracy with valence spectral discrepancies typically $\approx$ 0.01-0.02 eV or better. They also reproduce binding curves of hydride and oxide molecules typically within 0.02-0.03 eV deviations over the full non-dissociation range of interatomic distances.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
New generation of effective core potentials from correlated calculations: 2nd row elements
Authors:
M. Chandler Bennett,
Guangming Wang,
Abdulgani Annaberdiyev,
Cody A. Melton,
Luke Shulenburger,
Lubos Mitas
Abstract:
Very recently, we have introduced correlation consistent effective core potentials (ccECPs) derived from many-body approaches with the main target being its use in explicitly correlated methods but also in mainstream approaches. The ccECPs are based on reproducing excitation energies for a subset of valence states, i.e., achieving a near-isospectrality between the original and pseudo Hamiltonians.…
▽ More
Very recently, we have introduced correlation consistent effective core potentials (ccECPs) derived from many-body approaches with the main target being its use in explicitly correlated methods but also in mainstream approaches. The ccECPs are based on reproducing excitation energies for a subset of valence states, i.e., achieving a near-isospectrality between the original and pseudo Hamiltonians. In addition, binding curves of dimer molecules have been used for refinement and overall improvement of transferability over a range of bond lengths. Here we apply similar ideas to the second row elements and study several aspects of the constructions in order to find the optimal (or nearly-optimal) solutions within the chosen ECP forms with $3s,3p$ valence space (Ne-core). New constructions exhibit accurate low-lying atomic excitations and equilibrium molecular bonds (on average within $\approx$ $0.03$ eV and $3$ mÅ), however, the errors for Al and Si oxide molecules at short bond lengths are notably larger for both ours and existing ECPs. Assuming this limitation, our ccECPs show a systematic balance between the criteria of atomic spectra accuracy and transferability for molecular bonds. In order to provide another option with much higher uniform accuracy, we also construct He-core ECPs for the whole row with typical discrepancies of $\approx$ 0.01 eV or smaller.
△ Less
Submitted 7 September, 2018; v1 submitted 1 May, 2018;
originally announced May 2018.
-
A New Generation of Effective Core Potentials for Correlated Calculations
Authors:
M. Chandler Bennett,
Cody A. Melton,
Abdulgani Annaberdiyev,
Guangming Wang,
Luke Shulenburger,
Lubos Mitas
Abstract:
We outline ideas on desired properties for a new generation of effective core potentials (ECPs) that will allow valence-only calculations to reach the full potential offered by recent advances in many-body wave function methods. The key improvements include consistent use of correlated methods throughout ECP constructions and improved transferability as required for an accurate description of mole…
▽ More
We outline ideas on desired properties for a new generation of effective core potentials (ECPs) that will allow valence-only calculations to reach the full potential offered by recent advances in many-body wave function methods. The key improvements include consistent use of correlated methods throughout ECP constructions and improved transferability as required for an accurate description of molecular systems over a range of geometries. The guiding principle is the isospectrality of all-electron and ECP Hamiltonians for a subset of valence states. We illustrate these concepts on a few first- and second-row atoms (B, C, N, O, S) and we obtain higher accuracy in transferability than previous constructions while using a semi-local ECPs with a small number of parameters. In addition, the constructed ECPs enable many-body calculations of valence properties with higher (or same) accuracy than their all-electron counterparts with uncorrelated cores. This implies that the ECPs include also some of the impacts of core-core and core-valence correlations on valence properties. The results open further prospects for ECP improvements and refinements.
△ Less
Submitted 28 November, 2017; v1 submitted 12 July, 2017;
originally announced July 2017.
-
Phase Stability of TiO$_2$ Polymorphs from Diffusion Quantum Monte Carlo
Authors:
Ye Luo,
Anouar Benali,
Luke Shulenburger,
Jaron T. Krogel,
Olle Heinonen,
Paul R. C. Kent
Abstract:
Titanium dioxide, TiO$_2$, has multiple applications in catalysis, energy conversion and memristive devices because of its electronic structure. Most of these applications utilize the naturally existing phases: rutile, anatase and brookite. Despite the simple form of TiO$_2$ and its wide uses, there is long-standing disagreement between theory and experiment on the energetic ordering of these phas…
▽ More
Titanium dioxide, TiO$_2$, has multiple applications in catalysis, energy conversion and memristive devices because of its electronic structure. Most of these applications utilize the naturally existing phases: rutile, anatase and brookite. Despite the simple form of TiO$_2$ and its wide uses, there is long-standing disagreement between theory and experiment on the energetic ordering of these phases that has never been resolved. We present the first analysis of phase stability at zero temperature using the highly accurate many-body fixed node diffusion Quantum Monte Carlo (QMC) method. We also include the effects of temperature by calculating the Helmholtz free energy including both internal energy and vibrational contributions from density functional perturbation theory based quasi harmonic phonon calculations. Our QMC calculations find that anatase is the most stable phase at zero temperature, consistent with many previous mean-field calculations. However, at elevated temperatures, rutile becomes the most stable phase. For all finite temperatures, brookite is always the least stable phase.
△ Less
Submitted 15 September, 2016; v1 submitted 25 July, 2016;
originally announced July 2016.
-
Quantum Monte Carlo analysis of a charge ordered insulating antiferromagnet: the Ti$_4$O$_7$ Magnéli phase
Authors:
Anouar Benali,
Luke Shulenburger,
Jaron T. Krogel,
Xiaoliang Zhong,
Paul R. C. Kent,
Olle Heinonen
Abstract:
The Magnéli phase Ti$_4$O$_7$ is an important transition metal oxide with a wide range of applications because of its interplay between charge, spin, and lattice degrees of freedom. At low temperatures, it has non-trivial magnetic states very close in energy, driven by electronic exchange and correlation interactions. We have examined three low-lying states, one ferromagnetic and two antiferromagn…
▽ More
The Magnéli phase Ti$_4$O$_7$ is an important transition metal oxide with a wide range of applications because of its interplay between charge, spin, and lattice degrees of freedom. At low temperatures, it has non-trivial magnetic states very close in energy, driven by electronic exchange and correlation interactions. We have examined three low-lying states, one ferromagnetic and two antiferromagnetic, and calculated their energies as well as Ti spin moment distributions using highly accurate Quantum Monte Carlo methods. We compare our results to those obtained from density functional theory-based methods that include approximate corrections for exchange and correlation. Our results confirm the nature of the states and their ordering in energy, as compared with density-functional theory methods. However, the energy differences and spin distributions differ. A detailed analysis suggests that non-local exchange-correlation functionals, in addition to other approximations such as LDA+U to account for correlations, are needed to simultaneously obtain better estimates for spin moments, distributions, energy differences and energy gaps.
△ Less
Submitted 7 June, 2016; v1 submitted 30 March, 2016;
originally announced March 2016.
-
X-Ray Thomson scattering without the Chihara decomposition
Authors:
Andrew D. Baczewski,
Luke Shulenburger,
Michael P. Desjarlais,
Stephanie B. Hansen,
Rudolph J. Magyar
Abstract:
X-Ray Thomson Scattering (XRTS) is an important experimental technique used to measure the temperature, ionization state, structure, and density of warm dense matter (WDM). The fundamental property probed in these experiments is the electronic dynamic structure factor (DSF). In most models, this is decomposed into three terms [Chihara, J. Phys. F: Metal Phys. {\bf 17}, 295 (1987)] representing the…
▽ More
X-Ray Thomson Scattering (XRTS) is an important experimental technique used to measure the temperature, ionization state, structure, and density of warm dense matter (WDM). The fundamental property probed in these experiments is the electronic dynamic structure factor (DSF). In most models, this is decomposed into three terms [Chihara, J. Phys. F: Metal Phys. {\bf 17}, 295 (1987)] representing the response of tightly bound, loosely bound, and free electrons. Accompanying this decomposition is the classification of electrons as either bound or free, which is useful for gapped and cold systems but becomes increasingly questionable as temperatures and pressures increase into the WDM regime. In this work we provide unambiguous first principles calculations of the dynamic structure factor of warm dense beryllium, independent of the Chihara form, by treating bound and free states under a single formalism. The computational approach is real-time finite-temperature time-dependent density functional theory (TDDFT) being applied here for the first time to WDM. We compare results from TDDFT to Chihara-based calculations for experimentally relevant conditions in shock-compressed beryllium.
△ Less
Submitted 1 April, 2016; v1 submitted 17 December, 2015;
originally announced December 2015.
-
The Nature of the Interlayer Interaction in Bulk and Few-Layer Phosphorus
Authors:
Luke Shulenburger,
Andrew D. Baczewski,
Zhen Zhu,
Jie Guan,
David Tomanek
Abstract:
An outstanding challenge of theoretical electronic structure is the description of van der Waals (vdW) interactions in molecules and solids. Renewed interest in resolving this is in part motivated by the technological promise of layered systems including graphite, transition metal dichalcogenides, and more recently, black phosphorus, in which the interlayer interaction is widely believed to be dom…
▽ More
An outstanding challenge of theoretical electronic structure is the description of van der Waals (vdW) interactions in molecules and solids. Renewed interest in resolving this is in part motivated by the technological promise of layered systems including graphite, transition metal dichalcogenides, and more recently, black phosphorus, in which the interlayer interaction is widely believed to be dominated by these types of forces. We report a series of quantum Monte Carlo (QMC) calculations for bulk black phosphorus and related few-layer phosphorene, which elucidate the nature of the forces that bind these systems and provide benchmark data for the energetics of these systems. We find a significant charge redistribution due to the interaction between electrons on adjacent layers. Comparison to density functional theory (DFT) calculations indicate not only wide variability even among different vdW corrected functionals, but the failure of these functionals to capture the trend of reorganization predicted by QMC. The delicate interplay of steric and dispersive forces between layers indicate that few-layer phosphorene presents an unexpected challenge for the development of vdW corrected DFT.
△ Less
Submitted 19 August, 2015;
originally announced August 2015.
-
Shock Response and Phase Transitions of MgO at Planetary Impact Conditions
Authors:
Seth Root,
Luke Shulenburger,
Raymond W. Lemke,
Daniel H. Dolan,
Thomas R. Mattsson,
Michael P. Desjarlais
Abstract:
The moon-forming impact and the subsequent evolution of the proto-Earth is strongly dependent on the properties of materials at the extreme conditions generated by this violent collision. We examine the high pressure behavior of MgO, one of the dominant constituents in the earth's mantle, using high-precision, plate impact shock compression experiments performed on Sandia National Laboratories Z-M…
▽ More
The moon-forming impact and the subsequent evolution of the proto-Earth is strongly dependent on the properties of materials at the extreme conditions generated by this violent collision. We examine the high pressure behavior of MgO, one of the dominant constituents in the earth's mantle, using high-precision, plate impact shock compression experiments performed on Sandia National Laboratories Z-Machine and extensive quantum simulations using Density Functional Theory (DFT) and quantum Monte Carlo (QMC). The combined data span from ambient conditions to 1.2 TPa and 42,000 K, showing solid-solid and solid-liquid phase boundaries. Furthermore our results indicate under impact that the solid and liquid phases coexist for more than 100 GPa, pushing complete melting to pressures in excess of 600 GPa. The high pressure required for complete shock melting places a lower bound on the relative velocities required for the moon forming impact.
△ Less
Submitted 30 January, 2015;
originally announced February 2015.
-
Beyond chemical accuracy: The pseudopotential approximation in diffusion Monte Carlo calculations of the HCP to BCC phase transition in beryllium
Authors:
Luke Shulenburger,
Thomas R. Mattsson,
M. P. Desjarlais
Abstract:
Motivated by the disagreement between recent diffusion Monte Carlo calculations and experiments on the phase transition pressure between the ambient and beta-Sn phases of silicon, we present a study of the HCP to BCC phase transition in beryllium. This lighter element provides an oppor- tunity for directly testing many of the approximations required for calculations on silicon and may suggest a pa…
▽ More
Motivated by the disagreement between recent diffusion Monte Carlo calculations and experiments on the phase transition pressure between the ambient and beta-Sn phases of silicon, we present a study of the HCP to BCC phase transition in beryllium. This lighter element provides an oppor- tunity for directly testing many of the approximations required for calculations on silicon and may suggest a path towards increasing the practical accuracy of diffusion Monte Carlo calculations of solids in general. We demonstrate that the single largest approximation in these calculations is the pseudopotential approximation. After removing this we find excellent agreement with experiment for the ambient HCP phase and results similar to careful calculations using density functional theory for the phase transition pressure.
△ Less
Submitted 15 January, 2015;
originally announced January 2015.
-
Equations of state and stability of MgSiO$_3$ perovskite and post-perovskite phases from quantum Monte Carlo simulations
Authors:
Yangzheng Lin,
R. E. Cohen,
Stephen Stackhouse,
Kevin P. Driver,
Burkhard Militzer,
Luke Shulenburger,
Jeongnim Kim
Abstract:
We have performed quantum Monte Carlo (QMC) simulations and density functional theory (DFT) calculations to study the equations of state of MgSiO$_3$ perovskite (Pv) and post-perovskite (PPv), up to the pressure and temperature conditions of the base of Earth's lower mantle. The ground state energies were derived using QMC and the temperature dependent Helmholtz free energies were calculated withi…
▽ More
We have performed quantum Monte Carlo (QMC) simulations and density functional theory (DFT) calculations to study the equations of state of MgSiO$_3$ perovskite (Pv) and post-perovskite (PPv), up to the pressure and temperature conditions of the base of Earth's lower mantle. The ground state energies were derived using QMC and the temperature dependent Helmholtz free energies were calculated within the quasi-harmonic approximation and density functional perturbation theory. The equations of state for both phases of MgSiO$_3$ agree well with experiments, and better than those from generalized gradient approximation (GGA) calculations. The Pv-PPv phase boundary calculated from our QMC equations of states is also consistent with experiments, and better than previous LDA calculations. We discuss the implications for double crossing of the Pv-PPv boundary in the Earth.
△ Less
Submitted 24 September, 2014; v1 submitted 22 July, 2014;
originally announced July 2014.
-
Theory of melting at high pressures: Amending Density Functional Theory with Quantum Monte Carlo
Authors:
Luke Shulenburger,
M. P. Desjarlais,
T. R. Mattsson
Abstract:
We present an improved first-principles description of melting under pressure based on thermodynamic integration comparing Density Functional Theory (DFT) and quantum Monte Carlo (QMC) treatments of the system. The method is applied to address the longstanding discrepancy between density functional theory (DFT) calculations and diamond anvil cell (DAC) experiments on the melting curve of xenon, a…
▽ More
We present an improved first-principles description of melting under pressure based on thermodynamic integration comparing Density Functional Theory (DFT) and quantum Monte Carlo (QMC) treatments of the system. The method is applied to address the longstanding discrepancy between density functional theory (DFT) calculations and diamond anvil cell (DAC) experiments on the melting curve of xenon, a noble gas solid where van der Waals binding is challenging for traditional DFT methods. The calculations show excellent agreement with data below 20 GPa and that the high-pressure melt curve is well described by a Lindemann behavior up to at least 80 GPa, a finding in stark contrast to DAC data.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.
-
Quantum Monte Carlo applied to solids
Authors:
Luke Shulenburger,
Thomas R. Mattsson
Abstract:
We apply diffusion quantum Monte Carlo (DMC) to a broad set of solids, benchmarking the method by comparing bulk structural properties (equilibrium volume and bulk modulus) to experiment and DFT based theories. The test set includes materials with many different types of binding including ionic, metallic, covalent and van der Waals. We show that, on average, the accuracy is comparable to or better…
▽ More
We apply diffusion quantum Monte Carlo (DMC) to a broad set of solids, benchmarking the method by comparing bulk structural properties (equilibrium volume and bulk modulus) to experiment and DFT based theories. The test set includes materials with many different types of binding including ionic, metallic, covalent and van der Waals. We show that, on average, the accuracy is comparable to or better than that of density functional theory (DFT) when using the new generation of functionals, including one hybrid functional and two dispersion corrected functionals. The excellent performance of quantum Monte Carlo (QMC) on solids is promising for its application to heterogeneous systems and high-pressure/high density conditions. Important to the results here is the application of a consistent procedure with regards to the several approximations that are made, such as finite-size corrections and pseudo-potential approximations. This test set allows for any improvements in these methods to be judged in a systematic way.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.
-
Relative importance of crystal field versus bandwidth to the high pressure spin transition in transition metal monoxides
Authors:
Luke Shulenburger,
Sergey Y. Savrasov,
R E Cohen
Abstract:
The crystal field splitting and d bandwidth of the 3d transition metal monoxides MnO, FeO, CoO and NiO are analyzed as a function of pressure within density functional theory. In all four cases the 3d bandwidth is significantly larger than the crystal field splitting over a wide range of compressions. The bandwidth actually increases more as pressure is increased than the crystal field splitting…
▽ More
The crystal field splitting and d bandwidth of the 3d transition metal monoxides MnO, FeO, CoO and NiO are analyzed as a function of pressure within density functional theory. In all four cases the 3d bandwidth is significantly larger than the crystal field splitting over a wide range of compressions. The bandwidth actually increases more as pressure is increased than the crystal field splitting. Therefore the role of increasing bandwidth must be considered in any explanation of a possible spin collapse that these materials may exhibit under pressure.
△ Less
Submitted 27 November, 2009; v1 submitted 2 September, 2009;
originally announced September 2009.
-
Spin resolved energy parametrization of a quasi-one-dimensional electron gas
Authors:
Luke Shulenburger,
Michele Casula,
Gaetano Senatore,
Richard M. Martin
Abstract:
By carrying out extensive lattice regularized diffusion Monte Carlo calculations, we study the spin and density dependence of the ground state energy for a quasi-one-dimensional electron gas, with harmonic transverse confinement and long-range $1/r$ interactions. We present a parametrization of the exchange-correlation energy suitable for spin density functional calculations, which fulfills exac…
▽ More
By carrying out extensive lattice regularized diffusion Monte Carlo calculations, we study the spin and density dependence of the ground state energy for a quasi-one-dimensional electron gas, with harmonic transverse confinement and long-range $1/r$ interactions. We present a parametrization of the exchange-correlation energy suitable for spin density functional calculations, which fulfills exact low and high density limits.
△ Less
Submitted 3 December, 2008; v1 submitted 5 November, 2008;
originally announced November 2008.
-
Correlation effects in quasi one dimensional electron wires
Authors:
L. Shulenburger,
M. Casula,
G. Senatore,
R. M. Martin
Abstract:
We explore the role of electron correlation in quasi one dimensional quantum wires as the range of the interaction potential is changed and their thickness is varied by performing exact quantum Monte Carlo simulations at various electronic densities. In the case of unscreened interactions with a long range 1/x tail there is a crossover from a liquid to a quasi Wigner crystal state as the density…
▽ More
We explore the role of electron correlation in quasi one dimensional quantum wires as the range of the interaction potential is changed and their thickness is varied by performing exact quantum Monte Carlo simulations at various electronic densities. In the case of unscreened interactions with a long range 1/x tail there is a crossover from a liquid to a quasi Wigner crystal state as the density decreases. When this interaction is screened, quasi long range order is prevented from forming, although a significant correlation with 4 k_F periodicity is still present at low densities. At even lower electron concentration, exchange is suppressed and the spin-dependent interactions become negligible, making the electrons behave like spinless fermions. We show that this behavior is shared by the long range and screened interactions by studying the spin and charge excitations of the system in both cases. Finally, we study the effect of electron correlations in the double quantum wire experiment [Steinberg et al., Phys. Rev. B 77, 113307 (2006)], by introducing an accurate model for the screening in the experiment and explicitly including the finite length of the system in our simulations. We find that decreasing the electron density drives the system from a liquid to a state with quite strong 4 k_F correlations. This crossover takes place around $20 μm^{-1}$, the density where the electron localization occurs in the experiment. The charge and spin velocities are also in remarkable agreement with the experimental findings in the proximity of the crossover. We argue that correlation effects play an important role at the onset of the localization transition.
△ Less
Submitted 22 April, 2008; v1 submitted 10 March, 2008;
originally announced March 2008.
