-
Hydrogen storage in nanocrystalline high entropy material
Authors:
Yogesh Kumar Yadav,
Mohammad Abu Shaz,
Thakur Prasad Yadav
Abstract:
In this study, a single-phase nanocrystalline Al-Cu-Fe-Ni-Cr high-entropy alloy (HEA) has been synthesized by mechanical alloying and comprehensively investigated for hydrogen storage responses evaluated in details. High-energy attritor ball mill was used to synthesize the alloy from elemental powder, and hexane medium was used as a process control agent. As synthesized materials was nanocrystalli…
▽ More
In this study, a single-phase nanocrystalline Al-Cu-Fe-Ni-Cr high-entropy alloy (HEA) has been synthesized by mechanical alloying and comprehensively investigated for hydrogen storage responses evaluated in details. High-energy attritor ball mill was used to synthesize the alloy from elemental powder, and hexane medium was used as a process control agent. As synthesized materials was nanocrystalline in nature after 40 h of milling with a lattice parameter of 0.289 nm body-centered cubic (BCC) phase. As synthesized nanocrystalline Al-Cu-Fe-Ni-Cr HEA demonstrated remarkable hydrogen storage properties, absorbing 2.1 wt.% of hydrogen in 3 minutes at 300°C with 50 atm of hydrogen pressure. At the same temperature, it also desorbed about 1.6 wt.% of hydrogen in 6 minutes. These quick rates of absorption and desorption demonstrate how well the alloy absorbs and releases hydrogen. Additionally, the alloy showed outstanding cyclic stability, retaining almost all of its hydrogen capacity across 25 cycles with only a slight 0.2 wt.% loss. The nanocrystalline Al-Cu-Fe-Ni-Cr HEA is a potential option for hydrogen storage applications due to its outstanding cycle stability and fast kinetics of hydrogen storage and release.
△ Less
Submitted 3 September, 2025;
originally announced September 2025.
-
Catalytic activity of Al-Cu-Fe-Ni-Cr high entropy alloy
Authors:
Yogesh Kumar Yadav,
Mohammad Abu Shaz,
Thakur Prasad Yadav
Abstract:
Magnesium hydride (MgH2) is a promising material for hydrogen storage because of its abundance and beneficial properties, such as high storage capacity and cost-effectiveness under mild conditions. Despite of these benefits, MgH2 unfavorable thermodynamics and kinetics make it difficult to use in real applications. In this work, the hydrogen storage properties of MgH2have been improved using Al-Cu…
▽ More
Magnesium hydride (MgH2) is a promising material for hydrogen storage because of its abundance and beneficial properties, such as high storage capacity and cost-effectiveness under mild conditions. Despite of these benefits, MgH2 unfavorable thermodynamics and kinetics make it difficult to use in real applications. In this work, the hydrogen storage properties of MgH2have been improved using Al-Cu-Fe-Ni-Cr high entropy alloy (HEA) based catalysts, which has been synthesized via mechanical alloying. The experimental findings show that the beginning desorption temperature of MgH2significantly lowered from 425°C to 180°C by adding 5 wt. % Al-Cu-Fe-Ni-Cr HEA in MgH2. Moreover, the catalyst shows enhanced kinetics, attaining 7.3 wt. % hydrogen absorption in 3 minutes at 320°C with 15 atm hydrogen pressure, and ~5 wt. % desorption in 6 minutes at 320°C. These results highlight, how much lower its desorption temperature is than those of other well-known catalysts. Over a span of 25 cycles, MgH2 catalyzed by Al-Cu-Fe-Ni-Cr HEA exhibits remarkable cyclic stability with negligible fluctuations (~ 0.05 wt. %).After a thorough characterization of the materials, a workable catalytic mechanism for HEA was proposed in light of the results.
△ Less
Submitted 8 January, 2025;
originally announced January 2025.
-
AB5 type multicomponent TiVCoNiMn2 high-entropy alloy
Authors:
Abhishek Kumar,
M. A. Shaz,
N. K. Mukhopadhyay,
Thakur Prasad Yadav
Abstract:
Recent theoretical and practical research has focused on multi-component High Entropy Alloys (HEAs), which have superior mechanical and functional properties than standard alloys based on a single major element, thereby establishing a new field. A multi-component HEA contains five or more primary elements at concentrations ranging from 5 to 35 atomic percent. We examined the microstructure and mec…
▽ More
Recent theoretical and practical research has focused on multi-component High Entropy Alloys (HEAs), which have superior mechanical and functional properties than standard alloys based on a single major element, thereby establishing a new field. A multi-component HEA contains five or more primary elements at concentrations ranging from 5 to 35 atomic percent. We examined the microstructure and mechanical properties of TiVCoNiMn2 HEA. The mixing enthalpy and other thermodynamic parameters were determined using Meidma's model. TiVCoNiMn2 exhibits a mixing enthalpy of -15.6 kJ/mol and an atomic radius mismatch of approximately 10.03%. HEA is derived from both hydride and non-hydride-producing elements. This could be a useful hydrogen storage material. The hydrogen absorption/desorption capabilities of these HEAs are promising.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Hydrogen storage in C14 type TiVZrMnCoFe high entropy alloy
Authors:
A. Kumar,
T. P. Yadav,
M. A. Shaz,
N. K. Mukhopadhyay
Abstract:
In this present investigation, we discussed the synthesis, microstructure, and hydrogen storage behavior intermetallic Laves phase in a hexanal TiVZrMnCoFe high entropy alloy. In this HEA, three elements are hydride-forming elements and the other three are non-hydride-forming elements (Fe, Mn, Co). The thermodynamic parameter like enthalpy of mixing was calculated using Meidmas model.The possibili…
▽ More
In this present investigation, we discussed the synthesis, microstructure, and hydrogen storage behavior intermetallic Laves phase in a hexanal TiVZrMnCoFe high entropy alloy. In this HEA, three elements are hydride-forming elements and the other three are non-hydride-forming elements (Fe, Mn, Co). The thermodynamic parameter like enthalpy of mixing was calculated using Meidmas model.The possibility of developing high entropy Laves phase-based hydrogen storage materials was advocated.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Catalytic action of two-dimensional layered materials (WS2, and MoS2) on hydrogen sorption properties of MgH2
Authors:
S. K. Verma,
M. A. Shaz,
T. P. Yadav
Abstract:
The present study reports the catalytic action of two-dimensional (2D) layered materials (MoS2 and WS2) for improving the de/re-hydrogenation kinetics of MgH2. The MgH2 start desorbing at 277 C with a hydrogen storage capacity of 5.95 wt% in the presence of WS2 catalyst whereas onset desorption temperature of MgH2 catalyzed by MoS2 is 330 C. The MgH2-WS2 absorbed hydrogen ~ 3.72 wt% within 1.3 min…
▽ More
The present study reports the catalytic action of two-dimensional (2D) layered materials (MoS2 and WS2) for improving the de/re-hydrogenation kinetics of MgH2. The MgH2 start desorbing at 277 C with a hydrogen storage capacity of 5.95 wt% in the presence of WS2 catalyst whereas onset desorption temperature of MgH2 catalyzed by MoS2 is 330 C. The MgH2-WS2 absorbed hydrogen ~ 3.72 wt% within 1.3 minutes at 300 C under 13 atm hydrogen pressure and it desorbed ~5.57 wt% within 20 minutes at 300 C under 1 atm hydrogen pressure. We have performed 25 cycles of dehydrogenation (under 1 atm hydrogen pressure at 300 C) and re-hydrogenation (under 13 atm hydrogen pressure at 300 °C) to ensure cyclic stability of catalyzed version of MgH2 where MgH2-WS2 shows better cyclic stability than MgH2-MoS2. MgH2-WS2 also shows the lower reaction activation energy ~117 kJ/mol as compare to other catalyzed and uncatalyzed samples. On the other hand, these catalysts (WS2 and MoS2) do not have any impact on the thermodynamical parameters that is change in enthalpy.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
Structural correlation to enhanced magnetodielectric properties of Pr-doped polycrystalline Gd$_{0.55}$Pr$_{0.45}$MnO$_3$ at low temperatures
Authors:
Pooja Pant,
Harshit Agarwal,
Suresh Bharadwaj,
Archana Sagdeo,
M. A. Shaz
Abstract:
The effect of improved dielectric properties in the presence of an applied magnetic field is discussed in Pr doped polycrystalline Gd$_{0.55}$Pr$_{0.45}$MnO$_3$ complemented by the structural properties down to 50 K and magnetic properties. Enhanced dielectric permittivity and low dielectric loss represent the strongly field-dependent dielectric behaviour of the sample. The structural characteriza…
▽ More
The effect of improved dielectric properties in the presence of an applied magnetic field is discussed in Pr doped polycrystalline Gd$_{0.55}$Pr$_{0.45}$MnO$_3$ complemented by the structural properties down to 50 K and magnetic properties. Enhanced dielectric permittivity and low dielectric loss represent the strongly field-dependent dielectric behaviour of the sample. The structural characterizations using synchrotron angle dispersive X-ray diffraction confirm the orthorhombic symmetry of the polycrystalline sample with the Pnma space group from 300 K to 50 K. There is no structural transition at lower temperatures up to 50 K; however the Mn O octahedral distortion is reduced. The investigation of dielectric properties for frequencies range 500 Hz to 1 MHz was conducted in the temperature range 8 K to 300 K with and without a magnetic field of 7 Tesla, which shows the high dielectric constant in the 500 Hz frequency region. This confirms the relaxation phenomena in polycrystalline Gd$_{0.55}$Pr$_{0.45}$MnO$_3$. ac conductivity data shows the increasing trend for frequencies along with the activation energy which increases from low frequencies to higher frequencies. Temperature-dependent dc magnetization study shows the negative magnetization in polycrystalline Gd$_{0.55}$Pr$_{0.45}$MnO$_3$ at low temperature at 100 Oe applied field, due to spin canting of Mn-Mn magnetic lattice. High coercivity due to competition in between spin ordering of Mn and Gd,Pr magnetic lattice at 5 K are also observed in the field-dependent magnetization study.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Evolution from sinusoidal to collinear A-type antiferromagnetic spin-ordered magnetic phase transition in Tb0.6Pr0.4MnO3
Authors:
Harshit Agarwal,
Jose A Alonso,
Ángel Muñoz,
R J Choudhary,
O N Srivastava,
M A Shaz
Abstract:
The present study reports on the structural and magnetic phase transitions in Pr-doped polycrystalline Tb0.6Pr0.4MnO3, using high-resolution neutron powder diffraction (NPD) collected at SINQ spallation source (PSI), to emphasize the suppression of the sinusoidal magnetic structure of pure TbMnO3 and the evolution to a collinear A-type antiferromagnetic ordering. The phase purity, Jahn-Teller dist…
▽ More
The present study reports on the structural and magnetic phase transitions in Pr-doped polycrystalline Tb0.6Pr0.4MnO3, using high-resolution neutron powder diffraction (NPD) collected at SINQ spallation source (PSI), to emphasize the suppression of the sinusoidal magnetic structure of pure TbMnO3 and the evolution to a collinear A-type antiferromagnetic ordering. The phase purity, Jahn-Teller distortion, and one-electron bandwidth for eg orbital of Mn3+ cation have been calculated for polycrystalline Tb0.6Pr0.4MnO3, in comparison to the parent materials TbMnO3 and PrMnO3, through the Rietveld refinement study from X-ray diffraction data at room temperature. The temperature-dependent zero field-cooled and field-cooled dc magnetization study at low temperature down to 5 K reveals a variation in the magnetic phase transition due to the effect of Pr3+ substitution at the Tb3+ site, which gives the signature of the antiferromagnetic nature of the sample, with a weak ferromagnetic component at low temperature induced by an external magnetic field. The field-dependent magnetization study at low temperatures gives the weak coercivity having the order of 2 kOe, which is expected due to canted-spin arrangement or ferromagnetic nature of Terbium ordering. The NPD data for Tb0.6Pr0.4MnO3 confirms that the nuclear structure of the synthesized sample maintains its orthorhombic symmetry down to 1.5 K. Also, the magnetic structures have been solved at 50 K, 25 K, and 1.5 K through the NPD study, which shows A-type antiferromagnetic spin arrangement.
△ Less
Submitted 8 February, 2021; v1 submitted 25 November, 2020;
originally announced November 2020.
-
Synthesis of High-Quality Graphene through Electrochemical Exfoliation of Graphite in Alkaline Electrolyte
Authors:
Prashant Tripathi,
Ch. Ravi Prakash Patel,
M. A. Shaz,
O. N. Srivastava
Abstract:
Owing to wide variety of applications of graphene, high-quality and economical way of synthesizing graphene is highly desirable. In this study, we report a cost effective and simple approach to production of high-quality graphene. Here the synthesis route is based on electrochemical exfoliation of graphite. Instead of using strong acids (which oxidise and damage the geometrical topology of graphen…
▽ More
Owing to wide variety of applications of graphene, high-quality and economical way of synthesizing graphene is highly desirable. In this study, we report a cost effective and simple approach to production of high-quality graphene. Here the synthesis route is based on electrochemical exfoliation of graphite. Instead of using strong acids (which oxidise and damage the geometrical topology of graphene), we have used alkaline solution (KOH dissolved in water) as electrolyte. TEM analysis shows that as prepared graphene has 1-4 layers and large lateral size (up to ~18 micrometer). Raman analysis shows a unique feature. The D peak which is invariably present in graphene is absent here. This suggests that disorder in the graphene sheets synthesized by the present method, is nearly absent. A tentative mechanism of electrochemical exfoliation in alkaline electrolyte is discussed and described.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Formation and stability of icosahedral phase in Al65Ga5Pd17Mn13 alloy
Authors:
T. P. Yadav,
M. A. Shaz,
R. S. Tiwari,
O. N. Srivastava
Abstract:
In this work, we present the formation and characterization of a quaternary (pseudo ternary) icosahedral quasicrystal in Al65Ga5Pd17Mn13 alloy. The X ray diffraction and transmission electron microscopy confirmed the formation of icosahedral B2 type and O crystalline (orthorhombic structure) phases in as cast alloy. The icosahedral phase gets formed after annealing at 800 C for 60 hours. The for…
▽ More
In this work, we present the formation and characterization of a quaternary (pseudo ternary) icosahedral quasicrystal in Al65Ga5Pd17Mn13 alloy. The X ray diffraction and transmission electron microscopy confirmed the formation of icosahedral B2 type and O crystalline (orthorhombic structure) phases in as cast alloy. The icosahedral phase gets formed after annealing at 800 C for 60 hours. The formation of icosahedral phase in AlGaPdMn quaternary alloy by present technique has been studied for the first time. The Energy dispersive X-ray analysis investigations suggest the presence of Ga (5 at) in the alloy. It is interesting to note that pseudo twelve fold pattern in the as cast alloy has been observed. Icosahedral AlGaPdMn provides a new opportunity to investigate the various characteristics including surface characteristics. Attempts will be made to discuss the micromechanisms for the formation of quasicrystalline phase in Al-Ga-Pd-Mn alloys.
△ Less
Submitted 14 June, 2008;
originally announced June 2008.
-
Spin-Peierls transition in TiOCl
Authors:
M. Shaz,
S. van Smaalen,
L. Palatinus,
M. Hoinkis,
M. Klemm,
S. Horn,
R. Claessen
Abstract:
Temperature-dependent x-ray diffraction of the low-dimensional spin 1/2 quantum magnet TiOCl shows that the phase transition at T_{c2} = 90 K corresponds to a lowering of the lattice symmetry. Below T_{c1} = 66 K a twofold superstructure develops, that indicates the formation of spin-singlet pairs via direct exchange between neighboring Ti atoms, while the role of superexchange is found to be ne…
▽ More
Temperature-dependent x-ray diffraction of the low-dimensional spin 1/2 quantum magnet TiOCl shows that the phase transition at T_{c2} = 90 K corresponds to a lowering of the lattice symmetry. Below T_{c1} = 66 K a twofold superstructure develops, that indicates the formation of spin-singlet pairs via direct exchange between neighboring Ti atoms, while the role of superexchange is found to be negligible. TiOCl thus is identified as a spin-Peierls system of pure 1D chains of atoms. The first-order character of the transition at T_{c1} is explained by the competition between the structurally deformed state below T_{c2} and the spin-Peierls state below T_{c1}.
△ Less
Submitted 9 March, 2005;
originally announced March 2005.
