-
Prospective pathways of green graphene-based lab-on-chip devices: the pursuit toward sustainability
Authors:
Joydip Sengupta,
Chaudhery Mustansar Hussain
Abstract:
At present, analytical lab-on-chip devices find their usage in different facets of chemical analysis, biological analysis, point of care analysis, biosensors, etc. In addition, graphene has already established itself as an essential component of advanced lab-on-chip devices. Graphene-based lab-on-chip devices have achieved appreciable admiration because of their peerless performance in comparison…
▽ More
At present, analytical lab-on-chip devices find their usage in different facets of chemical analysis, biological analysis, point of care analysis, biosensors, etc. In addition, graphene has already established itself as an essential component of advanced lab-on-chip devices. Graphene-based lab-on-chip devices have achieved appreciable admiration because of their peerless performance in comparison to others. However, to accomplish a sustainable future a device must undergo Green-Screening to check its environmental compatibility. Thus, extensive research is carried out globally to make the graphene-based lab-on-chip green, though it is yet to be achieved. Nevertheless, as a ray of hope, there are few existing strategies that can be stitched together for feasible fabrication of environment-friendly green graphene-based analytical lab-on-chip, and those prospective pathways are reviewed in this paper.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Toxicity of Carbon Nanomaterials
Authors:
Arpita Adhikari,
Joydip Sengupta
Abstract:
The outstanding multidisciplinary applicability of nanomaterials has paved the path for the rapid advancement of nanoscience during the last few decades. Such technological progress subsequently results in an inevitable environmental exposure of nanomaterials. Presently, nanomaterials are employed in an extensive range of commercial products. Safe and sustainable incorporation of nanomaterials in…
▽ More
The outstanding multidisciplinary applicability of nanomaterials has paved the path for the rapid advancement of nanoscience during the last few decades. Such technological progress subsequently results in an inevitable environmental exposure of nanomaterials. Presently, nanomaterials are employed in an extensive range of commercial products. Safe and sustainable incorporation of nanomaterials in industrial products requires a profound and comprehensive understanding of their potential toxicity. Among different nanomaterials, carbon nanomaterials marked its notable superiority toward the development of state-of-the-art nanotechnology due to the significant contribution of each of the carbon allotropes with varied dimensionality. The zero-dimensional fullerene, one-dimensional carbon nanotube, and two-dimensional graphene possess an exclusive combination of distinctive properties that are utilized in most of the nanotechnology-based products nowadays. However, potential risk factors are associated with the production and the use of carbon nanomaterials. Consequently, the number of studies regarding the assessment of the toxicity of these nanomaterials has increased rapidly in the past decade. This chapter will summarize the recent scientific efforts on the toxicity evaluation of different carbon nanomaterials.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Carbon Nanomaterials to Combat Virus: A perspective in view of COVID-19
Authors:
Joydip Sengupta,
Chaudhery Mustansar Hussain
Abstract:
The rapid outbreaks of lethal viruses necessitate the development of novel antiviral substance. Besides the conventional antiviral substances, biocompatible nanomaterials also have significant potential in combating the virus at various stages of infection. Carbon nanomaterials have an impressive record against viruses and can deal with many crucial healthcare issues. In accordance with the publis…
▽ More
The rapid outbreaks of lethal viruses necessitate the development of novel antiviral substance. Besides the conventional antiviral substances, biocompatible nanomaterials also have significant potential in combating the virus at various stages of infection. Carbon nanomaterials have an impressive record against viruses and can deal with many crucial healthcare issues. In accordance with the published literature, biocompatible carbon nanomaterials have a promising prospect as an antiviral substance. Subsequently, the antiviral properties of different carbon nanomaterials namely fullerene, carbon nanotube, carbon dot and graphene oxide have been reviewed.
△ Less
Submitted 30 December, 2020;
originally announced December 2020.
-
Effect of growth temperature on the CVD grown Fe filled multi-walled carbon nanotubes using a modified photoresist
Authors:
Joydip Sengupta,
Avijit Jana,
N. D. Pradeep Singh,
Chacko Jacob
Abstract:
Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of th…
▽ More
Fe filled carbon nanotubes were synthesized by atmospheric pressure chemical vapor deposition using a simple mixture of iron acetylacetonate with a conventional photoresist and the effect of growth temperature from 550 to 950 °C on Fe filled nanotubes has been studied. Scanning electron microscopy results show that, as the growth temperature increases from 550 to 950 °C, the average diameter of the nanotubes increases while their number density decreases. High resolution transmission electron microscopy along with energy dispersive X-ray investigation shows that the nanotubes have a multi-walled structure with partial Fe filling for all growth temperatures. The graphitic nature of the nanotubes was observed via X-ray diffraction pattern. Raman analysis demonstrates that the degree of graphitization of the carbon nanotubes depends upon the growth temperature.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Pre-heating effect on the catalytic growth of partially filled carbon nanotubes by chemical vapor deposition
Authors:
Joydip Sengupta,
Chacko Jacob
Abstract:
The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using atmospheric pressure chemical vapor deposition (APCVD) of propane was investigated. Results show that pre-heating of the catalyst film deeply influences the particle si…
▽ More
The surface reconstruction of the Fe catalyst films due to high temperature processing in hydrogen prior to nanotube nucleation and its effect on the growth morphologies of partially filled carbon nanotubes (CNTs) synthesized using atmospheric pressure chemical vapor deposition (APCVD) of propane was investigated. Results show that pre-heating of the catalyst film deeply influences the particle size distribution, which governs the growth morphologies of the corresponding CNTs. The distribution of the catalyst particles over the Si substrate was analyzed before and after the heat treatment by atomic force microscopy (AFM) which reveals that heat treatment causes clusters of catalyst to coalesce and form macroscopic islands. The X-ray diffraction (XRD) pattern of the grown material indicates that they are graphitic in nature. Scanning electron microscopy (SEM) analysis suggested that the growth density strongly depends on the pre heat treatment of the Fe catalyst film. Multiwalled CNTs with partial catalyst filling were observed via high-resolution transmission electron microscopy (HRTEM) measurements. The degree of graphitization of the CNTs also depends on the pre heating as demonstrated by Raman analysis. A simple model for the growth of partially catalyst filled nanotubes is proposed.
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Application of carbon nanomaterials in the electronic industry
Authors:
Joydip Sengupta
Abstract:
Nanomaterials have much improved properties compared to their bulk counterparts, which promotes them as ideal material for applications in various industries. Among the various nanomaterials, different nanoallotropes of carbon, namely fullerene, carbon nanotubes, and graphene, are the most important as indicated by the fact that their discoverers gained prestigious awards such as Nobel Prize or Ka…
▽ More
Nanomaterials have much improved properties compared to their bulk counterparts, which promotes them as ideal material for applications in various industries. Among the various nanomaterials, different nanoallotropes of carbon, namely fullerene, carbon nanotubes, and graphene, are the most important as indicated by the fact that their discoverers gained prestigious awards such as Nobel Prize or Kavli Prize. Carbon forms different nano-allotropes by varying the nature of orbital hybridization. Since all nanoallotropes of carbon possess exotic physical and chemical properties, they are extensively used in different applications, especially in the electronic industry.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Different Synthesis Routes of Graphene-Based Metal Nanocomposites
Authors:
Joydip Sengupta
Abstract:
Nanocomposite material proves to be the best candidate to match todays technological need as fascinating properties can be achieved by combining two or more nanomaterials. Among various nanomaterials, graphene is able to stand out far ahead of all others because of its novel structure and exclusive characteristics. In particular, graphene metal nanocomposites have attracted enormous interest for t…
▽ More
Nanocomposite material proves to be the best candidate to match todays technological need as fascinating properties can be achieved by combining two or more nanomaterials. Among various nanomaterials, graphene is able to stand out far ahead of all others because of its novel structure and exclusive characteristics. In particular, graphene metal nanocomposites have attracted enormous interest for their prospective use in various fields, including electronics and electrical and energy related areas. However, for the utmost use of potential of graphene, it has to be homogenously embedded into metal matrices. Thus, appropriate synthesis route is decisive to obtain graphene metal nanocomposites with desired properties. This chapter will summarize the different synthesis routes of high quality graphene metal nanocomposites along with their current developments.
△ Less
Submitted 5 November, 2019;
originally announced November 2019.
-
Well-Ordered "Ripple-Shaped" Microstructures of Mn Thin Films on GaAs Substrates
Authors:
Anupama Chanda,
Joydip Sengupta,
Chacko Jacob
Abstract:
This study was aimed to investigate the thickness dependent morphological changes of Mn films deposited on GaAs substrates by thermal evaporation technique. Ni films were deposited under same conditions to perform comparative study of the morphological changes with respect to the Mn films. The scanning electron microscopy and atomic force microscopy studies revealed ripple-shaped structure of Mn f…
▽ More
This study was aimed to investigate the thickness dependent morphological changes of Mn films deposited on GaAs substrates by thermal evaporation technique. Ni films were deposited under same conditions to perform comparative study of the morphological changes with respect to the Mn films. The scanning electron microscopy and atomic force microscopy studies revealed ripple-shaped structure of Mn film with good periodicity, while Ni film only exhibited small granules deposited throughout the surface. The influence of the thickness of the Mn film in producing the ripple structure was clearly observed. In addition, the annealing time was considered as the major parameter to control the ordering of the ripple structure. X-ray diffraction pattern indicated the formation of different phases of Ga-Mn and Mn-As due to diffusion of atoms during annealing. A model for the creation of stress-driven microstructure is proposed which indicates that Mn thin films grow on GaAs substrates in three stages: in the primary stage, the growth occurs via two-dimensional nucleation process; as the thickness increases, the stress is released by the film via creation of additional surface roughness which produce ripples; and finally an island-like growth occurs because of the non-uniform distribution of stress along the surface of the film.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Substrate free synthesis of graphene nanoflakes by atmospheric pressure chemical vapour deposition using Ni powder as a catalyst
Authors:
Joydip Sengupta,
Kaustuv Das,
U N Nandi,
Chacko Jacob
Abstract:
Graphene nanoflakes (GNFs) were synthesized by atmospheric pressure chemical vapour deposition of propane (C3H8) employing Ni (salen) powder without the introduction of a substrate. The graphitic nature of the GNFs was examined by an X-ray diffraction method. Scanning electron microscopy results revealed that GNFs were stacked on top of one another and had a high aspect ratio. Transmission electro…
▽ More
Graphene nanoflakes (GNFs) were synthesized by atmospheric pressure chemical vapour deposition of propane (C3H8) employing Ni (salen) powder without the introduction of a substrate. The graphitic nature of the GNFs was examined by an X-ray diffraction method. Scanning electron microscopy results revealed that GNFs were stacked on top of one another and had a high aspect ratio. Transmission electron microscopy studies suggested that the GNFs were made up of a number of crystalline graphene layers, some of which were even single crystalline as evident from the selected area diffraction pattern. Finally, Raman spectroscopy confirmed the high quality of the GNFs.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Structural and optical properties of post annealed Mg doped ZnO thin films deposited by the sol gel method
Authors:
Joydip Sengupta,
Arifeen Ahmed,
Rini Labar
Abstract:
Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X ray diffraction (XRD) while atomic force microscopy (AFM) was employed to probe the topographical alteration of the films. The optical properties of the post ann…
▽ More
Thin films of magnesium doped zinc oxide (MZO) were synthesized using the sol gel method and annealed at different temperatures under ambient condition. The morphological properties of the post annealed MZO films were investigated using X ray diffraction (XRD) while atomic force microscopy (AFM) was employed to probe the topographical alteration of the films. The optical properties of the post annealed MZO films were examined by UV visible spectroscopy and the Tauc method was used to estimate the optical band gap. The studies revealed that, with the rise of annealing temperature the crystallinity and the surface roughness of the MZO films were increased whereas the optical transmittance and the energy bandgap were decreased.
△ Less
Submitted 6 September, 2019;
originally announced September 2019.
-
Effect of annealing on the structural, topographical and optical properties of sol gel derived ZnO and AZO thin films
Authors:
Joydip Sengupta,
R. K. Sahoo,
C. D. Mukherjee
Abstract:
A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and the recorded patterns indicated that the crystallinity of the films always enhanced with increasing annealing temperature while it degrades with Al doping. The t…
▽ More
A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and the recorded patterns indicated that the crystallinity of the films always enhanced with increasing annealing temperature while it degrades with Al doping. The topographical modification of the films due to heat treatment was examined by atomic force microscopy which revealed that annealing roughened the surface of all the films; however the AZO films always exhibited smoother morphology than ZnO. Study of the optical properties by UV-Visible spectrophotometer demonstrated that the transmittance was gradually diminished with the rise in annealing temperature. In addition, a notable increase in the optical band gap was also observed for the AZO films.
△ Less
Submitted 4 September, 2019;
originally announced September 2019.
-
Carbon Nanotube Fabrication at Industrial Scale: Opportunities and Challenges
Authors:
Joydip Sengupta
Abstract:
Careful research on different materials reveals that the material properties are mostly affected by the size of it. Material size down to nanometer scale exhibits some remarkable properties, resulting in unique physical and chemical characteristics. In todays world of nanotechnology, carbon nanotubes (CNTs) have become a high priority material because of their exclusive structure, novel characteri…
▽ More
Careful research on different materials reveals that the material properties are mostly affected by the size of it. Material size down to nanometer scale exhibits some remarkable properties, resulting in unique physical and chemical characteristics. In todays world of nanotechnology, carbon nanotubes (CNTs) have become a high priority material because of their exclusive structure, novel characteristics with enormous potential in many technological applications. Till date chemical vapor deposition (CVD) is the preferred and widely used technique among different CNT growth methods, because of its potential advantage to produce CNTs of high purity, large yield with ease of scale up and low setup cost. This article provides an overview of different CVD methods for industrial scale fabrication of CNTs. The influence of material aspect, viz. catalyst type, catalyst support, and growth control aspect, viz. process temperature, pressure, catalyst concentration, are discussed. Additionally, possible growth mechanisms concerning CNT formation are described. Finally, the key challenges of the process are addressed with future perspective.
△ Less
Submitted 27 August, 2019;
originally announced September 2019.
-
Influence of annealing temperature on the structural, topographical and optical properties of sol gel derived ZnO thin films
Authors:
Joydip Sengupta,
R. K. Sahoo,
K. K. Bardhan,
C. D. Mukherjee
Abstract:
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction and the recorded patterns indicated that all the films had a preferred orientation along (002) plane and the crystallinity along with the grain size were augmente…
▽ More
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction and the recorded patterns indicated that all the films had a preferred orientation along (002) plane and the crystallinity along with the grain size were augmented with annealing temperature. The topographical modification of the films due to heat treatment was probed by atomic force microscopy which revealed that annealing roughened the surface of the film. The optical properties were examined by a UV visible spectrophotometer which exhibited that maximum transmittance reached nearly 90% and it diminished with increasing annealing temperature.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
Site selective synthesis of in situ Ni filled multiwalled carbon nanotubes using Ni(salen) as a catalyst source
Authors:
Joydip Sengupta,
Avijit Jana,
N D Pradeep Singh,
C Mitra,
Chacko Jacob
Abstract:
The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth m…
▽ More
The synthesis of Ni filled multiwalled carbon nanotubes was performed by atmospheric pressure chemical vapor deposition with propane on Si at 850 C using a simple mixture of Ni(salen), and a conventional photoresist. Analysis of the carbon nanotubes using scanning electron microscopy together with high resolution transmission electron microscopy show that the nanotubes have grown by a tip growth mechanism and exhibit a multi walled structure with partial Ni filling. The high quality of the Ni filled nanotubes is evidenced by Raman spectroscopy. The magnetic properties of Ni filled nanotubes were analyzed using a superconducting quantum interference device which revealed their ferromagnetic behavior with large coercivity. A scalable as well as site selective growth of high quality Ni filled carbon nanotubes is achieved by a simple photolithographic method.
△ Less
Submitted 13 August, 2019;
originally announced August 2019.
-
Lithographically defined site-selective growth of Fe filled multi-walled carbon nanotubes using a modified photoresist
Authors:
Joydip Sengupta,
Avijit Jana,
N. D. Pradeep Singh,
Chacko Jacob
Abstract:
Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Tr…
▽ More
Partially Fe filled multi-walled carbon nanotubes (MWCNTs) were grown by chemical vapor deposition with propane at 850 °C using a simple mixture of iron (III) acetylacetonate (Fe(acac)3) powder and conventional photoresist. Scanning electron microscopy revealed that catalytic nanoparticles with an average diameter of 70 nm are formed on the Si substrate which governs the diameter of the MWCNTs. Transmission electron microscopy shows that the nanotubes have a multi-walled structure with partial Fe filling. A site-selective growth of partially Fe filled MWCNTs is achieved by a simple photolithographic route.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
Growth temperature dependence of partially Fe filled MWCNT using chemical vapor deposition
Authors:
Joydip Sengupta,
Chacko Jacob
Abstract:
This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor in the temperature range 650 to 950 1C using propane as the carbon source, Fe as the catalyst material, and Si as the catalyst support. Atomic force microscopy (…
▽ More
This investigation deals with the effect of growth temperature on the growth behavior of Fe filled multiwalled carbon nanotubes (MWCNTs). Carbon nanotube (CNT) synthesis was carried out in a thermal chemical vapor deposition (CVD) reactor in the temperature range 650 to 950 1C using propane as the carbon source, Fe as the catalyst material, and Si as the catalyst support. Atomic force microscopy (AFM) analysis of the catalyst exhibits that at elevated temperature clusters of catalyst coalesce and form macroscopic islands. Field emission scanning electron microscopy (FESEM) results show that with increased growth temperature the average diameter of the nanotubes increases but their density decreases. High-resolution transmission electron microscopy (HRTEM) studies suggest that the nanotubes have multi-walled structure with partial Fe filling for all growth temperatures. The X-ray diffraction (XRD) pattern of the grown materials indicates that they are graphitic in nature. The characterization of nanotubes by Raman spectroscopy reveals that the optimized growth temperature for Fe filled CNTs is 850 1C, in terms of quality. A simple model for the growth of Fe filled carbon nanotubes is proposed.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition
Authors:
J. Sengupta,
C. Jacob
Abstract:
The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the samples grow through a tip growth mechanism. High-resolution transmission electron microscopy (HRTEM) measurements show multiwalled carbon nanotubes (MWCNTs) with b…
▽ More
The effect of Fe and Ni catalysts on the synthesis of carbon nanotubes (CNTs) using atmospheric pressure chemical vapor deposition (APCVD) was investigated. Field emission scanning electron microscopy (FESEM) analysis suggests that the samples grow through a tip growth mechanism. High-resolution transmission electron microscopy (HRTEM) measurements show multiwalled carbon nanotubes (MWCNTs) with bamboo structure for Ni catalyst while iron filled straight tubes were obtained with the Fe catalyst. The X-ray diffraction (XRD) pattern indicates that nanotubes are graphitic in nature and there is no trace of carbide phases in both the cases. Low frequency Raman analysis of the bamboo-like and filled CNTs confirms the presence of radial breathing modes (RBM). The degree of graphitization of CNTs synthesized from Fe catalyst is higher than that from Ni catalyst as demonstrated by the high frequency Raman analysis. Simple models for the growth of bamboo-like and tubular catalyst filled nanotubes are proposed.
△ Less
Submitted 3 July, 2019;
originally announced August 2019.
-
An atomic force microscopy and optical microscopy study of various shaped void formation and reduction in 3C-SiC films grown on Si using chemical vapor deposition
Authors:
A. Gupta,
J. Sengupta,
C. Jacob
Abstract:
The formation of various uncommon shaped voids along with regular triangular and square voids in the epitaxial 3C-SiC films on Si has been investigated by optical microscopy and atomic force microscopy. Heteroepitaxial growth of 3C-SiC films on Si (001) and (111) substrates has been performed using hexamethyldisilane in a resistance-heated chemical vapor deposition reactor. The influence of the or…
▽ More
The formation of various uncommon shaped voids along with regular triangular and square voids in the epitaxial 3C-SiC films on Si has been investigated by optical microscopy and atomic force microscopy. Heteroepitaxial growth of 3C-SiC films on Si (001) and (111) substrates has been performed using hexamethyldisilane in a resistance-heated chemical vapor deposition reactor. The influence of the orientation of the Si substrate in determining the shape of the voids has clearly been observed. In addition, the growth period and the growth-temperature have been considered as the major parameters to control the size, density and shape of the voids. Generally, voids are faceted along {111} planes, but depending upon growth conditions, other facets with higher surface energy have also been observed. Finally the size and density of the voids are remarkably reduced, by suitable growth technique.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Carbon nanotube synthesis from propane decomposition on a pre-treated Ni overlayer
Authors:
J Sengupta,
SK Panda,
C Jacob
Abstract:
Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was deposited on Si(111) substrate by evaporation and heat treated at 900°C. The growth of nanotubes was carried out at 850°C using propane as a source of carbon. Distrib…
▽ More
Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was deposited on Si(111) substrate by evaporation and heat treated at 900°C. The growth of nanotubes was carried out at 850°C using propane as a source of carbon. Distribution of the catalyst particles over the Si substrate was analysed before and after heat treatment by atomic force microscopy (AFM). The X-ray diffraction (XRD) pattern of the grown material revealed that they are graphitic in nature. Field emission scanning electron microscopy (FESEM) was used to investigate the growth process and it was found that a catalytic particle was always situated at the tip of the tube thus implying a tip growth mechanism. Evidence for the presence of radial breathing mode from multi-wall nanotubes (MWNTs) in the grown sample was obtained from micro-Raman analysis. Finally, high-resolution transmission electron microscopic (HRTEM) analysis confirmed that the graphene layers of the CNTs are well ordered with typical 0.34 nm spacing.
△ Less
Submitted 1 June, 2019;
originally announced June 2019.
-
Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition
Authors:
Joydip Sengupta
Abstract:
In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts,…
▽ More
In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.
△ Less
Submitted 8 June, 2018;
originally announced August 2018.
