-
Hot Carrier Thermalization and Josephson Inductance Thermometry in a Graphene-based Microwave Circuit
Authors:
Raj Katti,
Harpreet Arora,
Olli-Pentti Saira,
Kenji Watanabe,
Takashi Taniguchi,
Keith C. Schwab,
Michael Roukes,
Stevan Nadj-Perge
Abstract:
Due to its exceptional electronic and thermal properties, graphene is a key material for bolometry, calorimetry, and photon detection. However, despite graphene's relatively simple electronic structure, the physical processes responsible for the transport of heat from the electrons to the lattice are experimentally still elusive. Here, we measure the thermal response of low-disorder graphene encap…
▽ More
Due to its exceptional electronic and thermal properties, graphene is a key material for bolometry, calorimetry, and photon detection. However, despite graphene's relatively simple electronic structure, the physical processes responsible for the transport of heat from the electrons to the lattice are experimentally still elusive. Here, we measure the thermal response of low-disorder graphene encapsulated in hexagonal boron nitride (hBN) by integrating it within a multi-terminal superconducting device coupled to a microwave resonator. This technique allows us to simultaneously apply Joule heat power to the graphene flake while performing calibrated readout of the electron temperature. We probe the thermalization rates of both electrons and holes with high precision and observe a thermalization scaling exponent consistent with cooling dominated by resonant electron-phonon coupling processes occurring at the interface between graphene and superconducting leads. The technique utilized here is applicable for wide range of semiconducting-superconducting interface heterostructures and provides new insights into the thermalization pathways essential for the next-generation thermal detectors.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Ultra-high Q Acoustic Resonance in Superfluid 4He
Authors:
L. A. DeLorenzo,
K. C. Schwab
Abstract:
We report the measurement of the acoustic quality factor of a gram-scale, kilo-hertz frequency superfluid resonator, detected through the parametric coupling to a superconducting niobium microwave cavity. For temperature between 400mK and 50mK, we observe a $T^{-4}$ temperature dependence of the quality factor, consistent with a 3-phonon dissipation mechanism. We observe Q factors up to…
▽ More
We report the measurement of the acoustic quality factor of a gram-scale, kilo-hertz frequency superfluid resonator, detected through the parametric coupling to a superconducting niobium microwave cavity. For temperature between 400mK and 50mK, we observe a $T^{-4}$ temperature dependence of the quality factor, consistent with a 3-phonon dissipation mechanism. We observe Q factors up to $1.4\cdot10^8$, consistent with the dissipation due to dilute $^3$He impurities, and expect that significant further improvements are possible. These experiments are relevant to exploring quantum behavior and decoherence of massive macroscopic objects, the laboratory detection of continuous wave gravitational waves from pulsars, and the probing of possible limits to physical length scales.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
Detecting continuous gravitational waves with superfluid $^4$He
Authors:
S. Singh,
L. A. De Lorenzo,
I. Pikovski,
K. C. Schwab
Abstract:
Direct detection of gravitational waves is opening a new window onto our universe. Here, we study the sensitivity to continuous-wave strain fields of a kg-scale optomechanical system formed by the acoustic motion of superfluid helium-4 parametrically coupled to a superconducting microwave cavity. This narrowband detection scheme can operate at very high $Q$-factors, while the resonant frequency is…
▽ More
Direct detection of gravitational waves is opening a new window onto our universe. Here, we study the sensitivity to continuous-wave strain fields of a kg-scale optomechanical system formed by the acoustic motion of superfluid helium-4 parametrically coupled to a superconducting microwave cavity. This narrowband detection scheme can operate at very high $Q$-factors, while the resonant frequency is tunable through pressurization of the helium in the 0.1-1.5 kHz range. The detector can therefore be tuned to a variety of astrophysical sources and can remain sensitive to a particular source over a long period of time. For reasonable experimental parameters, we find that strain fields on the order of $h\sim 10^{-23} /\sqrt{\rm Hz}$ are detectable. We show that the proposed system can significantly improve the limits on gravitational wave strain from nearby pulsars within a few months of integration time.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
Quantum squeezing of motion in a mechanical resonator
Authors:
E. E. Wollman,
C. U. Lei,
A. J. Weinstein,
J. Suh,
A. Kronwald,
F. Marquardt,
A. A. Clerk,
K. C. Schwab
Abstract:
As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale…
▽ More
As a result of the quantum, wave-like nature of the physical world, a harmonic oscillator can never be completely at rest. Even in the quantum ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. In this work, using microwave frequency radiation pressure, we both prepare a micron-scale mechanical system in a state near the quantum ground state and then manipulate its thermal fluctuations to produce a stationary, quadrature-squeezed state. We deduce that the variance of one motional quadrature is 0.80 times the zero-point level, or 1 dB of sub-zero-point squeezing. This work is relevant to the quantum engineering of states of matter at large length scales, the study of decoherence of large quantum systems, and for the realization of ultra-sensitive sensing of force and motion.
△ Less
Submitted 6 July, 2015;
originally announced July 2015.
-
Mesoscopic Mechanical Resonators as Quantum Non-Inertial Reference Frames
Authors:
B. N. Katz,
M. P. Blencowe,
K. C. Schwab
Abstract:
An atom attached to a micrometer-scale wire that is vibrating at a frequency of 100 MHz and with displacement amplitude 1 nm experiences an acceleration magnitude 10^9 ms^-2, approaching the surface gravity of a neutron star. As one application of such extreme non-inertial forces in a mesoscopic setting, we consider a model two-path atom interferometer with one path consisting of the 100 MHz vibra…
▽ More
An atom attached to a micrometer-scale wire that is vibrating at a frequency of 100 MHz and with displacement amplitude 1 nm experiences an acceleration magnitude 10^9 ms^-2, approaching the surface gravity of a neutron star. As one application of such extreme non-inertial forces in a mesoscopic setting, we consider a model two-path atom interferometer with one path consisting of the 100 MHz vibrating wire atom guide. The vibrating wire guide serves as a non-inertial reference frame and induces an in principle measurable phase shift in the wave function of an atom traversing the wire frame. We furthermore consider the effect on the two-path atom wave interference when the vibrating wire is modeled as a quantum object, hence functioning as a quantum non-inertial reference frame. We outline a possible realization of the vibrating wire, atom interferometer using a superfluid helium quantum interference setup.
△ Less
Submitted 11 October, 2015; v1 submitted 7 September, 2014;
originally announced September 2014.
-
Observation and interpretation of motional sideband asymmetry in a quantum electro-mechanical device
Authors:
A. J. Weinstein,
C. U. Lei,
E. E. Wollman,
J. Suh,
A. Metelmann,
A. A. Clerk,
K. C. Schwab
Abstract:
Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave…
▽ More
Quantum electro-mechanical systems offer a unique opportunity to probe quantum noise properties in macroscopic devices, properties which ultimately stem from the Heisenberg Uncertainty Principle. A simple example of this is expected to occur in a microwave parametric transducer, where mechanical motion generates motional sidebands corresponding to the up and down frequency-conversion of microwave photons. Due to quantum vacuum noise, the rates of these processes are expected to be unequal. We measure this fundamental imbalance in a microwave transducer coupled to a radio-frequency mechanical mode, cooled near the ground state of motion. We also discuss the subtle origin of this imbalance: depending on the measurement scheme, the imbalance is most naturally attributed to the quantum fluctuations of either the mechanical mode or of the electromagnetic field.
△ Less
Submitted 11 April, 2014;
originally announced April 2014.
-
Measurement of the electronic thermal conductance channels and heat capacity of graphene at low temperature
Authors:
K. C. Fong,
Emma Wollman,
Harish Ravi,
Wei Chen,
Aash Clerk,
M. D. Shaw,
H. G. LeDuc,
K. C. Schwab
Abstract:
The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of…
▽ More
The ability to transport energy is a fundamental property of the two-dimensional Dirac fermions in graphene. Electronic thermal transport in this system is relatively unexplored and is expected to show unique fundamental properties and to play an important role in future applications of graphene, including opto-electronics, plasmonics, and ultra-sensitive bolometry. Here we present measurements of bipolar, electron-diffusion and electron-phonon thermal conductances, and infer the electronic specific heat, with a minimum value of 10 $k_{\rm{B}}$ ($10^{-22}$ JK$^{-1}$) per square micron. We test the validity of the Wiedemann-Franz law and find the Lorenz number equals $1.32\times(π^2/3)(k_{\rm{B}}/e)^2$. The electron-phonon thermal conductance has a temperature power law $T^2$ at high doping levels, and the coupling parameter is consistent with recent theory, indicating its enhancement by impurity scattering. We demonstrate control of the thermal conductance by electrical gating and by suppressing the diffusion channel using superconducting electrodes, which sets the stage for future graphene-based single microwave photon detection.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Superfluid Optomechanics: Coupling of a Superfluid to a Superconducting Condensate
Authors:
L. A. DeLorenzo,
K. C. Schwab
Abstract:
We investigate the low loss acoustic motion of superfluid $^4$He parametrically coupled to a very low loss, superconducting Nb, TE$_{011}$ microwave resonator, forming a gram-scale, sideband resolved, optomechanical system. We demonstrate the detection of a series of acoustic modes with quality factors as high as $7\cdot 10^6$. At higher temperatures, the lowest dissipation modes are limited by an…
▽ More
We investigate the low loss acoustic motion of superfluid $^4$He parametrically coupled to a very low loss, superconducting Nb, TE$_{011}$ microwave resonator, forming a gram-scale, sideband resolved, optomechanical system. We demonstrate the detection of a series of acoustic modes with quality factors as high as $7\cdot 10^6$. At higher temperatures, the lowest dissipation modes are limited by an intrinsic three phonon process. Acoustic quality factors approaching $10^{11}$ may be possible in isotopically purified samples at temperatures below 10 mK. A system of this type may be utilized to study macroscopic quantized motion and as an ultra-sensitive sensor of extremely weak displacements and forces, such as continuous gravity wave sources.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Quantum back-action in spinor condensate magnetometry
Authors:
S. K. Steinke,
S. Singh,
P. Meystre,
K. C. Schwab,
M. Vengalattore
Abstract:
We provide a theoretical treatment of the quantum backaction of Larmor frequency measurements on a spinor Bose-Einstein condensate by an off-resonant light field. Two main results are presented; the first is a "quantum jump" operator description that reflects the abrupt change in the spin state of the atoms when a single photon is counted at a photodiode. The second is the derivation of a conditio…
▽ More
We provide a theoretical treatment of the quantum backaction of Larmor frequency measurements on a spinor Bose-Einstein condensate by an off-resonant light field. Two main results are presented; the first is a "quantum jump" operator description that reflects the abrupt change in the spin state of the atoms when a single photon is counted at a photodiode. The second is the derivation of a conditional stochastic master equation relating the evolution of the condensate density matrix to the measurement record. We comment on applications of this formalism to metrology and many-body studies.
△ Less
Submitted 12 November, 2012;
originally announced November 2012.
-
Ultra-sensitive and Wide Bandwidth Thermal Measurements of Graphene at Low Temperatures
Authors:
Kin Chung Fong,
Keith Schwab
Abstract:
Graphene is a material with remarkable electronic properties and exceptional thermal transport properties near room temperature, which have been well examined and understood. However at very low temperatures the thermodynamic and thermal transport properties are much less well explored and somewhat surprisingly, is expected to exhibit extreme thermal isolation. Here we demonstrate an ultra-sensiti…
▽ More
Graphene is a material with remarkable electronic properties and exceptional thermal transport properties near room temperature, which have been well examined and understood. However at very low temperatures the thermodynamic and thermal transport properties are much less well explored and somewhat surprisingly, is expected to exhibit extreme thermal isolation. Here we demonstrate an ultra-sensitive, wide-bandwidth measurement scheme to probe the thermal transport and thermodynamic properties of the electron gas of graphene. We employ Johnson noise thermometry at microwave frequency to sensitively measure the temperature of the electron gas with resolution of $4 mK/\sqrt{Hz}$ and a bandwidth of 80 MHz. We have measured the electron-phonon coupling from 2-30 K at a charge density of $2\cdot 10^{11} cm^{-2}$. Utilizing bolometric mixing, we have sensed temperature oscillations with period of 430 ps and have determined the heat capacity of the electron gas to be $2\cdot 10^{-21} J/(K\cdot μm^2)$ at 5 K which is consistent with that of a two dimensional, Dirac electron gas. These measurements suggest that graphene-based devices together with wide bandwidth noise thermometry can generate substantial advances in the areas of ultra-sensitive bolometry, calorimetry, microwave and terahertz photo-detection, and bolometric mixing for applications in areas such as observational astronomy and quantum information and measurement.
△ Less
Submitted 30 May, 2012; v1 submitted 26 February, 2012;
originally announced February 2012.
-
Back-action Evading Measurements of Nanomechanical Motion
Authors:
J. B. Hertzberg,
T. Rocheleau,
T. Ndukum,
M. Savva,
A. A. Clerk,
K. C. Schwab
Abstract:
When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be ev…
▽ More
When performing continuous measurements of position with sensitivity approaching quantum mechanical limits, one must confront the fundamental effects of detector back-action. Back-action forces are responsible for the ultimate limit on continuous position detection, can also be harnessed to cool the observed structure, and are expected to generate quantum entanglement. Back-action can also be evaded, allowing measurements with sensitivities that exceed the standard quantum limit, and potentially allowing for the generation of quantum squeezed states. We realize a device based on the parametric coupling between an ultra-low dissipation nanomechanical resonator and a microwave resonator. Here we demonstrate back-action evading (BAE) detection of a single quadrature of motion with sensitivity 4 times the quantum zero-point motion, back-action cooling of the mechanical resonator to n = 12 quanta, and a parametric mechanical pre-amplification effect which is harnessed to achieve position resolution a factor 1.3 times quantum zero-point motion.
△ Less
Submitted 4 June, 2009;
originally announced June 2009.
-
Demonstration of an ultracold micro-optomechanical oscillator in a cryogenic cavity
Authors:
Simon Groeblacher,
Jared B. Hertzberg,
Michael R. Vanner,
Garrett D. Cole,
Sylvain Gigan,
K. C. Schwab,
Markus Aspelmeyer
Abstract:
Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal qu…
▽ More
Preparing and manipulating quantum states of mechanical resonators is a highly interdisciplinary undertaking that now receives enormous interest for its far-reaching potential in fundamental and applied science. Up to now, only nanoscale mechanical devices achieved operation close to the quantum regime. We report a new micro-optomechanical resonator that is laser cooled to a level of 30 thermal quanta. This is equivalent to the best nanomechanical devices, however, with a mass more than four orders of magnitude larger (43 ng versus 1 pg) and at more than two orders of magnitude higher environment temperature (5 K versus 30 mK). Despite the large laser-added cooling factor of 4,000 and the cryogenic environment, our cooling performance is not limited by residual absorption effects. These results pave the way for the preparation of 100-um scale objects in the quantum regime. Possible applications range from quantum-limited optomechanical sensing devices to macroscopic tests of quantum physics.
△ Less
Submitted 21 October, 2013; v1 submitted 13 January, 2009;
originally announced January 2009.
-
Nanomechanical squeezing with detection via a microwave cavity
Authors:
M. J. Woolley,
A. C. Doherty,
G. J. Milburn,
K. C. Schwab
Abstract:
We study a parametrically-driven nanomechanical resonator capacitively coupled to a microwave cavity. If the nanoresonator can be cooled to near its quantum ground state then quantum squeezing of a quadrature of the nanoresonator motion becomes feasible. We consider the adiabatic limit in which the cavity mode is slaved to the nanoresonator mode. By driving the cavity on its red-detuned sideband…
▽ More
We study a parametrically-driven nanomechanical resonator capacitively coupled to a microwave cavity. If the nanoresonator can be cooled to near its quantum ground state then quantum squeezing of a quadrature of the nanoresonator motion becomes feasible. We consider the adiabatic limit in which the cavity mode is slaved to the nanoresonator mode. By driving the cavity on its red-detuned sideband, the squeezing can be coupled into the microwave field at the cavity resonance. The red-detuned sideband drive is also compatible with the goal of ground state cooling. Squeezing of the output microwave field may be inferred using a technique similar to that used to infer squeezing of the field produced by a Josephson parametric amplifier, and subsequently, squeezing of the nanoresonator motion may be inferred. We have calculated the output field microwave squeezing spectra and related this to squeezing of the nanoresonator motion, both at zero and finite temperature. Driving the cavity on the blue-detuned sideband, and on both the blue and red sidebands, have also been considered within the same formalism.
△ Less
Submitted 28 September, 2008; v1 submitted 12 March, 2008;
originally announced March 2008.
-
Cooling a nanomechanical resonator with quantum back-action
Authors:
A. Naik,
O. Buu,
M. D. LaHaye,
A. D. Armour,
A. A. Clerk,
M. P. Blencowe,
K. C. Schwab
Abstract:
Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomec…
▽ More
Quantum mechanics demands that the act of measurement must affect the measured object. When a linear amplifier is used to continuously monitor the position of an object, the Heisenberg uncertainty relationship requires that the object be driven by force impulses, called back-action. Here we measure the back-action of a superconducting single-electron transistor (SSET) on a radiofrequency nanomechanical resonator. The conductance of the SSET, which is capacitively coupled to the resonator, provides a sensitive probe of the latter's position;back-action effects manifest themselves as an effective thermal bath, the properties of which depend sensitively on SSET bias conditions. Surprisingly, when the SSET is biased near a transport resonance, we observe cooling of the nanomechanical mode from 550mK to 300mK-- an effect that is analogous to laser cooling in atomic physics. Our measurements have implications for nanomechanical readout of quantum information devices and the limits of ultrasensitive force microscopy (such as single-nuclear-spin magnetic resonance force microscopy). Furthermore, we anticipate the use of these backaction effects to prepare ultracold and quantum states of mechanical structures, which would not be accessible with existing technology.
△ Less
Submitted 12 September, 2006;
originally announced September 2006.
-
Self-cooling of a micro-mirror by radiation pressure
Authors:
S. Gigan,
H. R. Boehm,
M. Paternostro,
F. Blaser,
G. Langer,
J. B. Hertzberg,
K. Schwab,
D. Baeuerle,
M. Aspelmeyer,
A. Zeilinger
Abstract:
We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased…
▽ More
We demonstrate passive feedback cooling of a mechanical resonator based on radiation pressure forces and assisted by photothermal forces in a high-finesse optical cavity. The resonator is a free-standing high-reflectance micro-mirror (of mass m=400ng and mechanical quality factor Q=10^4) that is used as back-mirror in a detuned Fabry-Perot cavity of optical finesse F=500. We observe an increased damping in the dynamics of the mechanical oscillator by a factor of 30 and a corresponding cooling of the oscillator modes below 10 K starting from room temperature. This effect is an important ingredient for recently proposed schemes to prepare quantum entanglement of macroscopic mechanical oscillators.
△ Less
Submitted 8 November, 2006; v1 submitted 11 July, 2006;
originally announced July 2006.
-
A high-reflectivity high-Q micromechanical Bragg-mirror
Authors:
H. R. Boehm,
S. Gigan,
G. Langer,
J. Hertzberg,
F. Blaser,
D. Baeuerle,
K. Schwab,
A. Zeilinger,
M. Aspelmeyer
Abstract:
We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid approach involving laser ablation and dry etching. The mirror has a reflectivity of 99.6%, a mass of 400ng, and a mechanical quality factor Q of approximately…
▽ More
We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid approach involving laser ablation and dry etching. The mirror has a reflectivity of 99.6%, a mass of 400ng, and a mechanical quality factor Q of approximately 10^4. Using this micromirror in a Fabry Perot cavity, a finesse of 500 has been achieved. This is an important step towards designing tunable high-Q high-finesse cavities on chip.
△ Less
Submitted 2 January, 2007; v1 submitted 28 July, 2006;
originally announced July 2006.
-
Comment on recent Physical Review Letter by Gaidarzhy, et al. "Evidence for quantized displacement in macroscopic nanomechanical oscillator."
Authors:
K. C. Schwab,
M. P. Blencowe,
M. L. Roukes,
A. N. Cleland,
S. M. Girvin,
G. J. Milburn,
K. L. Ekinci
Abstract:
In a recent letter, Gaidarzhy et al. claim to have observed evidence for quantized displacements of a nanomechanical oscillator. We contend that the evidence, analysis, claims, and conclusions presented are contrary to expectations from fundamentals of quantum mechanics and elasticity theory, and that the method used by the authors is unsuitable in principle to observe the quantized energy state…
▽ More
In a recent letter, Gaidarzhy et al. claim to have observed evidence for quantized displacements of a nanomechanical oscillator. We contend that the evidence, analysis, claims, and conclusions presented are contrary to expectations from fundamentals of quantum mechanics and elasticity theory, and that the method used by the authors is unsuitable in principle to observe the quantized energy states of a nanomechanical structure.
△ Less
Submitted 1 March, 2005;
originally announced March 2005.
-
Dynamics of a two-level system strongly coupled to a high-frequency quantum oscillator
Authors:
E. K. Irish,
J. Gea-Banacloche,
I. Martin,
K. C. Schwab
Abstract:
Recent experiments on quantum behavior in microfabricated solid-state systems suggest tantalizing connections to quantum optics. Several of these experiments address the prototypical problem of cavity quantum electrodynamics: a two-level system coupled to a quantum harmonic oscillator. Such devices may allow the exploration of parameter regimes outside the near-resonance and weak-coupling assump…
▽ More
Recent experiments on quantum behavior in microfabricated solid-state systems suggest tantalizing connections to quantum optics. Several of these experiments address the prototypical problem of cavity quantum electrodynamics: a two-level system coupled to a quantum harmonic oscillator. Such devices may allow the exploration of parameter regimes outside the near-resonance and weak-coupling assumptions of the ubiquitous rotating-wave approximation (RWA), necessitating other theoretical approaches. One such approach is an adiabatic approximation in the limit that the oscillator frequency is much larger than the characteristic frequency of the two-level system. A derivation of the approximation is presented and the time evolution of the two-level-system occupation probability is calculated using both thermal- and coherent-state initial conditions for the oscillator. Closed-form evaluation of the time evolution in the weak-coupling limit provides insight into the differences between the thermal- and coherent-state models. Finally, potential experimental observations in solid-state systems, particularly the Cooper-pair box--nanomechanical resonator system, are discussed and found to be promising.
△ Less
Submitted 12 August, 2005; v1 submitted 15 December, 2004;
originally announced December 2004.
-
Squeezing of a nanomechanical resonator by quantum nondemolition measurement and feedback
Authors:
Rusko Ruskov,
Keith Schwab,
Alexander N. Korotkov
Abstract:
We analyze squeezing of the nanoresonator state produced by periodic measurement of position by a quantum point contact or a single-electron transistor. The mechanism of squeezing is the stroboscopic quantum nondemolition measurement generalized to the case of continuous measurement by a weakly coupled detector. The magnitude of squeezing is calculated for the harmonic and stroboscopic modulatio…
▽ More
We analyze squeezing of the nanoresonator state produced by periodic measurement of position by a quantum point contact or a single-electron transistor. The mechanism of squeezing is the stroboscopic quantum nondemolition measurement generalized to the case of continuous measurement by a weakly coupled detector. The magnitude of squeezing is calculated for the harmonic and stroboscopic modulations of measurement, taking into account detector efficiency and nanoresonator quality factor. We also analyze the operation of the quantum feedback, which prevents fluctuations of the wavepacket center due to measurement back-action. Verification of the squeezed state can be performed in almost the same way as its preparation; similar procedure can also be used for the force detection with sensitivity beyond the standard quantum limit.
△ Less
Submitted 24 November, 2004;
originally announced November 2004.
-
Quantum Nondemolition Squeezing of a Nanomechanical Resonator
Authors:
Rusko Ruskov,
Keith Schwab,
Alexander N. Korotkov
Abstract:
We show that the nanoresonator position can be squeezed significantly below the ground state level by measuring the nanoresonator with a quantum point contact or a single-electron transistor and applying a periodic voltage across the detector. The mechanism of squeezing is basically a generalization of quantum nondemolition measurement of an oscillator to the case of continuous measurement by a…
▽ More
We show that the nanoresonator position can be squeezed significantly below the ground state level by measuring the nanoresonator with a quantum point contact or a single-electron transistor and applying a periodic voltage across the detector. The mechanism of squeezing is basically a generalization of quantum nondemolition measurement of an oscillator to the case of continuous measurement by a weakly coupled detector. The quantum feedback is necessary to prevent the ``heating'' due to measurement back-action. We also discuss a procedure of experimental verification of the squeezed state.
△ Less
Submitted 18 June, 2004;
originally announced June 2004.
-
Dissipation in Nanocrystalline-Diamond Nanomechanical Resonators
Authors:
A. B. Hutchinson,
P. A. Truitt,
K. C. Schwab,
L. Sekaric,
J. M. Parpia,
H. G. Craighead,
J. E. Butler
Abstract:
We have measured the dissipation and frequency of nanocrystalline-diamond nanomechanical resonators with resonant frequencies between 13.7 MHz and 157.3 MHz, over a temperature range of 1.4-274 K. Using both magnetomotive network analysis and a novel time-domain ring-down technique, we have found the dissipation in this material to have a temperature dependence roughly following T^0.2, with Q^-1…
▽ More
We have measured the dissipation and frequency of nanocrystalline-diamond nanomechanical resonators with resonant frequencies between 13.7 MHz and 157.3 MHz, over a temperature range of 1.4-274 K. Using both magnetomotive network analysis and a novel time-domain ring-down technique, we have found the dissipation in this material to have a temperature dependence roughly following T^0.2, with Q^-1 = 10^-4 at low temperatures. The frequency dependence of a large dissipation feature at ~35-55 K is consistent with thermal activation over a 0.02 eV barrier with an attempt frequency of 10 GHz.
△ Less
Submitted 24 November, 2003;
originally announced November 2003.
-
Feedback cooling of a nanomechanical resonator
Authors:
Asa Hopkins,
Kurt Jacobs,
Salman Habib,
Keith Schwab
Abstract:
Cooled, low-loss nanomechanical resonators offer the prospect of directly observing the quantum dynamics of mesoscopic systems. However, the present state of the art requires cooling down to the milliKelvin regime in order to observe quantum effects. Here we present an active feedback strategy based on continuous observation of the resonator position for the purpose of obtaining these low temper…
▽ More
Cooled, low-loss nanomechanical resonators offer the prospect of directly observing the quantum dynamics of mesoscopic systems. However, the present state of the art requires cooling down to the milliKelvin regime in order to observe quantum effects. Here we present an active feedback strategy based on continuous observation of the resonator position for the purpose of obtaining these low temperatures. In addition, we apply this to an experimentally realizable configuration, where the position monitoring is carried out by a single-electron transistor. Our estimates indicate that with current technology this technique is likely to bring the required low temperatures within reach.
△ Less
Submitted 25 February, 2003;
originally announced February 2003.
-
Quantum Measurement of a Coupled Nanomechanical Resonator -- Cooper-Pair Box System
Authors:
Elinor K. Irish,
K. Schwab
Abstract:
We show two effects as a result of considering the second-order correction to the spectrum of a nanomechanical resonator electrostatically coupled to a Cooper-pair box. The spectrum of the Cooper-pair box is modified in a way which depends on the Fock state of the resonator. Similarly, the frequency of the resonator becomes dependent on the state of the Cooper-pair box. We consider whether these…
▽ More
We show two effects as a result of considering the second-order correction to the spectrum of a nanomechanical resonator electrostatically coupled to a Cooper-pair box. The spectrum of the Cooper-pair box is modified in a way which depends on the Fock state of the resonator. Similarly, the frequency of the resonator becomes dependent on the state of the Cooper-pair box. We consider whether these frequency shifts could be utilized to prepare the nanomechanical resonator in a Fock state, to perform a quantum non-demolition measurement of the resonator Fock state, and to distinguish the phase states of the Cooper-pair box.
△ Less
Submitted 31 July, 2003; v1 submitted 14 January, 2003;
originally announced January 2003.
-
Entanglement and decoherence of a micromechanical resonator via coupling to a Cooper box
Authors:
A. D. Armour,
M. P. Blencowe,
K. C. Schwab
Abstract:
We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state.
We analyse the quantum dynamics of a micromechanical resonator capacitively coupled to a Cooper box. With appropriate quantum state control of the Cooper box, the resonator can be driven into a superposition of spatially separated states. The Cooper box can also be used to probe the environmentally-induced decoherence of the resonator superposition state.
△ Less
Submitted 20 December, 2001;
originally announced December 2001.
-
Mechanical Lamb-shift analogue for the Cooper-pair box
Authors:
A. D. Armour,
M. P. Blencowe,
K. C. Schwab
Abstract:
We estimate the correction to the Cooper-pair box energy level splitting due to the quantum motion of a coupled micromechanical gate electrode. While the correction due to zero-point motion is very small, it should be possible to observe thermal motion-induced corrections to the photon-assisted tunneling current.
We estimate the correction to the Cooper-pair box energy level splitting due to the quantum motion of a coupled micromechanical gate electrode. While the correction due to zero-point motion is very small, it should be possible to observe thermal motion-induced corrections to the photon-assisted tunneling current.
△ Less
Submitted 11 September, 2001;
originally announced September 2001.
