-
A simple method to reprogram the binding specificity of DNA-coated colloids that crystallize
Authors:
Pepijn G. Moerman,
Huang Fang,
Thomas E. Videbæk,
W. Benjamin Rogers,
Rebecca Schulman
Abstract:
DNA-coated colloids can crystallize into a multitude of lattices, ranging from face-centered cubic to diamond and thereby contribute to our understanding of crystallization and open avenues to producing structures with useful photonic properties. Despite the broad potential design space of DNA-coated colloids, the design cycle for synthesizing DNA-coated particles is slow: preparing a particle wit…
▽ More
DNA-coated colloids can crystallize into a multitude of lattices, ranging from face-centered cubic to diamond and thereby contribute to our understanding of crystallization and open avenues to producing structures with useful photonic properties. Despite the broad potential design space of DNA-coated colloids, the design cycle for synthesizing DNA-coated particles is slow: preparing a particle with a new type of DNA sequence takes more than one day and requires custom-made and chemically modified DNA that typically takes the supplier over a month to synthesize. Here, we introduce a method to generate particles with custom sequences from a single feed stock in under an hour at ambient conditions. Our method appends new DNA domains onto the DNA grafted to colloidal particles based on a template that takes the supplier less than a week to produce. The resultant particles crystallize as readily and at the same temperature as those produced via direct chemical synthesis. Moreover, we show that particles coated with a single sequence can be converted into a variety of building blocks with differing specificities by appending different DNA sequences to them. This approach to DNA-coated particle preparation will make it practical to identify optimal and complex particle sequence designs and to expand the use of DNA-coated colloids to a much broader range of investigators and commercial entities.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
Droplet Migration on Conical Fibers
Authors:
Clementine Fournier,
Carmen Lee,
Rafael Schulman,
Elie Raphael,
Kari Dalnoki-Veress
Abstract:
The spontaneous migration of droplets on conical fibers is studied experimentally by depositing silicone oil droplets onto conical glass fibers. Their motion is recorded using optical microscopy and analysed to extract the relevant geometrical parameters of the system. The speed of the droplet can be predicted as a function of geometry and the fluid properties using a simple theoretical model, whi…
▽ More
The spontaneous migration of droplets on conical fibers is studied experimentally by depositing silicone oil droplets onto conical glass fibers. Their motion is recorded using optical microscopy and analysed to extract the relevant geometrical parameters of the system. The speed of the droplet can be predicted as a function of geometry and the fluid properties using a simple theoretical model, which balances viscous dissipation against the surface tension driving force. The experimental data are found to be in good agreement with the model.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Droplets capped with an elastic film can be round, elliptical, or nearly square
Authors:
Rafael D. Schulman,
Kari Dalnoki-Veress
Abstract:
We present experiments which show that the partial wetting of droplets capped by taut elastic films is highly tunable. Adjusting the tension allows the contact angle and droplet morphology to be controlled. By exploiting these elastic boundaries, droplets can be made elliptical, with an adjustable aspect ratio, and can even be transformed into a nearly square shape. This system can be used to crea…
▽ More
We present experiments which show that the partial wetting of droplets capped by taut elastic films is highly tunable. Adjusting the tension allows the contact angle and droplet morphology to be controlled. By exploiting these elastic boundaries, droplets can be made elliptical, with an adjustable aspect ratio, and can even be transformed into a nearly square shape. This system can be used to create tunable liquid lenses, and moreover, presents a unique approach to liquid patterning.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Surface energy of strained amorphous solids
Authors:
Rafael D. Schulman,
Miguel Trejo,
Thomas Salez,
Elie Raphael,
Kari Dalnoki-Veress
Abstract:
Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependen…
▽ More
Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependent surface energies, but in amorphous materials, such as polymeric glasses and elastomers, the strain dependence is debated due to a dearth of direct measurements. Here, we utilize contact angle measurements on strained glassy and elastomeric solids to address this matter. We show conclusively that interfaces involving polymeric glasses exhibit strain dependent surface energies, and give strong evidence for the absence of such a dependence for incompressible elastomers. The results provide fundamental insight into our understanding of the interfaces of amorphous solids and their interaction with contacting liquids.
△ Less
Submitted 14 January, 2018; v1 submitted 25 November, 2017;
originally announced November 2017.
-
Liquid dewetting under a thin elastic film
Authors:
Rafael D. Schulman,
John F. Niven,
Michiel A. Hack,
Christian DiMaria,
Kari Dalnoki-Veress
Abstract:
We study the dewetting of liquid films capped by a thin elastomeric layer. When the tension in the elastomer is isotropic, circular holes grow at a rate which decreases with increasing tension. The morphology of holes and rim stability can be controlled by changing the boundary conditions and tension in the capping film. When the capping film is prepared with a biaxial tension, holes form with a n…
▽ More
We study the dewetting of liquid films capped by a thin elastomeric layer. When the tension in the elastomer is isotropic, circular holes grow at a rate which decreases with increasing tension. The morphology of holes and rim stability can be controlled by changing the boundary conditions and tension in the capping film. When the capping film is prepared with a biaxial tension, holes form with a non-circular shape elongated along the high tension axis. With suitable choice of elastic boundary conditions, samples can even be designed such that square holes appear.
△ Less
Submitted 25 November, 2017;
originally announced November 2017.
-
Liquid droplets on a free-standing glassy membrane: deformation through the glass transition
Authors:
Adam Fortais,
Rafael D. Schulman,
Kari Dalnoki-Veress
Abstract:
In this study, micro-droplets are placed on thin, glassy, free-standing films where the Laplace pressure of the droplet deforms the free-standing film, creating a bulge. The film's tension is modulated by changing temperature continuously from well below the glass transition into the melt state of the film. The contact angle of the liquid droplet with the planar film as well as the angle of the bu…
▽ More
In this study, micro-droplets are placed on thin, glassy, free-standing films where the Laplace pressure of the droplet deforms the free-standing film, creating a bulge. The film's tension is modulated by changing temperature continuously from well below the glass transition into the melt state of the film. The contact angle of the liquid droplet with the planar film as well as the angle of the bulge with the film are measured and found to be consistent with the contact angles predicted by a force balance at the contact line.
△ Less
Submitted 22 June, 2017;
originally announced June 2017.
-
Liquid droplets act as "compass needles" for the stresses in a deformable membrane
Authors:
Rafael D. Schulman,
René Ledesma-Alonso,
Thomas Salez,
Elie Raphaël,
Kari Dalnoki-Veress
Abstract:
We examine the shape of droplets atop deformable thin elastomeric films prepared with an anisotropic tension. As the droplets generate a deformation in the taut film through capillary forces, they assume a shape that is elongated along the high tension direction. By measuring the contact line profile, the tension in the membrane can be completely determined. Minimal theoretical arguments lead to p…
▽ More
We examine the shape of droplets atop deformable thin elastomeric films prepared with an anisotropic tension. As the droplets generate a deformation in the taut film through capillary forces, they assume a shape that is elongated along the high tension direction. By measuring the contact line profile, the tension in the membrane can be completely determined. Minimal theoretical arguments lead to predictions for the droplet shape and membrane deformation that are in excellent agreement with the data. On the whole, the results demonstrate that droplets can be used as probes to map out the stress field in a membrane.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Elastocapillary bending of microfibers around liquid droplets
Authors:
Rafael D. Schulman,
Amir Porat,
Kathleen Charlesworth,
Adam Fortais,
Thomas Salez,
Elie Raphaël,
Kari Dalnoki-Veress
Abstract:
We report on the elastocapillary deformation of flexible microfibers in contact with liquid droplets. A fiber is observed to bend more as the size of the contacting droplet is increased. At a critical droplet size, proportional to the bending elastocapillary length, the fiber is seen to spontaneously wind around the droplet. To rationalize these observations, we invoke a minimal model based on ela…
▽ More
We report on the elastocapillary deformation of flexible microfibers in contact with liquid droplets. A fiber is observed to bend more as the size of the contacting droplet is increased. At a critical droplet size, proportional to the bending elastocapillary length, the fiber is seen to spontaneously wind around the droplet. To rationalize these observations, we invoke a minimal model based on elastic beam theory, and find agreement with experimental data. Further energetic considerations provide a consistent prediction for the winding criterion.
△ Less
Submitted 20 July, 2016;
originally announced July 2016.
-
Self-assembly of multicomponent structures in and out of equilibrium
Authors:
Stephen Whitelam,
Rebecca Schulman,
Lester Hedges
Abstract:
Theories of phase change and self-assembly often invoke the idea of a `quasiequilibrium', a regime in which the nonequilibrium association of building blocks results nonetheless in a structure whose properties are determined solely by an underlying free energy landscape. Here we study a prototypical example of multicomponent self-assembly, a one-dimensional fiber grown from red and blue blocks. If…
▽ More
Theories of phase change and self-assembly often invoke the idea of a `quasiequilibrium', a regime in which the nonequilibrium association of building blocks results nonetheless in a structure whose properties are determined solely by an underlying free energy landscape. Here we study a prototypical example of multicomponent self-assembly, a one-dimensional fiber grown from red and blue blocks. If the equilibrium structure possesses compositional correlations different from those characteristic of random mixing, then it cannot be generated without error at any finite growth rate: there is no quasiequilibrium regime. However, by exploiting dynamic scaling, structures characteristic of equilibrium at one point in phase space can be generated, without error, arbitrarily far from equilibrium. Our results thus suggest a `nonperturbative' strategy for multicomponent self-assembly in which the target structure is, by design, not the equilibrium one.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
Programmable Control of Nucleation for Algorithmic Self-Assembly
Authors:
Rebecca Schulman,
Erik Winfree
Abstract:
Algorithmic self-assembly, a generalization of crystal growth processes, has been proposed as a mechanism for autonomous DNA computation and for bottom-up fabrication of complex nanostructures. A `program' for growing a desired structure consists of a set of molecular `tiles' designed to have specific binding interactions. A key challenge to making algorithmic self-assembly practical is designin…
▽ More
Algorithmic self-assembly, a generalization of crystal growth processes, has been proposed as a mechanism for autonomous DNA computation and for bottom-up fabrication of complex nanostructures. A `program' for growing a desired structure consists of a set of molecular `tiles' designed to have specific binding interactions. A key challenge to making algorithmic self-assembly practical is designing tile set programs that make assembly robust to errors that occur during initiation and growth. One method for the controlled initiation of assembly, often seen in biology, is the use of a seed or catalyst molecule that reduces an otherwise large kinetic barrier to nucleation. Here we show how to program algorithmic self-assembly similarly, such that seeded assembly proceeds quickly but there is an arbitrarily large kinetic barrier to unseeded growth. We demonstrate this technique by introducing a family of tile sets for which we rigorously prove that, under the right physical conditions, linearly increasing the size of the tile set exponentially reduces the rate of spurious nucleation. Simulations of these `zig-zag' tile sets suggest that under plausible experimental conditions, it is possible to grow large seeded crystals in just a few hours such that less than 1 percent of crystals are spuriously nucleated. Simulation results also suggest that zig-zag tile sets could be used for detection of single DNA strands. Together with prior work showing that tile sets can be made robust to errors during properly initiated growth, this work demonstrates that growth of objects via algorithmic self-assembly can proceed both efficiently and with an arbitrarily low error rate, even in a model where local growth rules are probabilistic.
△ Less
Submitted 8 January, 2010; v1 submitted 13 July, 2006;
originally announced July 2006.
