Showing 1–50 of 76 results for author: Schofield, J

Dynamics of Quantum-Classical Systems in Nonequilibrium Environments

Authors: Jeremy Schofield, Raymond Kapral

Abstract: The dynamics of a quantum system coupled to a classical environment and subject to constraints that drive it out of equilibrium is described. The evolution of the system is governed by the quantum-classical Liouville equation. Rather than evaluating the evolution of the mixed quantum-classical density operator, we derive exact equations of motion for the nonequilibrium average values of a set of o… ▽ More The dynamics of a quantum system coupled to a classical environment and subject to constraints that drive it out of equilibrium is described. The evolution of the system is governed by the quantum-classical Liouville equation. Rather than evaluating the evolution of the mixed quantum-classical density operator, we derive exact equations of motion for the nonequilibrium average values of a set of operators or variables, along with correlation function expressions for the dissipative coefficients that enter these equations. These equations are obtained by requiring that the exact nonequilibrium averages are equal to local nonequilibrium averages that depend on auxiliary fields whose values satisfy evolution equations obtained using projection operator methods. The results are illustrated by deriving reaction-diffusion equations coupled to fluid hydrodynamic equations for a dilute solution of quantum particles that can exist in two metastable states. Nonequilibrium steady states are discussed along with the reaction rate and diffusion correlation functions that characterize such states. △ Less

Submitted 14 January, 2025; v1 submitted 27 November, 2024; originally announced November 2024.

Comments: 15 pages

Microscopic theory of a Janus motor in a non-equilibrium fluid: Surface hydrodynamics and boundary conditions

Authors: Bryan Robertson, Jeremy Schofield, Raymond Kapral

Abstract: We present a derivation from first principles of the coupled equations of motion of an active self-diffusiophoretic Janus motor and the hydrodynamic densities of its fluid environment that are nonlinearly displaced from equilibrium. The derivation makes use of time-dependent projection operator techniques defined in terms of slowly varying coarse-grained microscopic densities of the fluid species… ▽ More We present a derivation from first principles of the coupled equations of motion of an active self-diffusiophoretic Janus motor and the hydrodynamic densities of its fluid environment that are nonlinearly displaced from equilibrium. The derivation makes use of time-dependent projection operator techniques defined in terms of slowly varying coarse-grained microscopic densities of the fluid species number, total momentum, and energy. The exact equations of motion are simplified using time-scale arguments, resulting in Markovian equations for the Janus motor linear and angular velocities with average forces and torques that depend on the fluid densities. For a large colloid, the fluid equations are separated into bulk and interfacial contributions, and the conditions under which the dynamics of the fluid densities can be accurately represented by bulk hydrodynamic equations subject to boundary conditions on the colloid are determined. We show how the results for boundary conditions based on continuum theory can be obtained from the molecular description and provide Green-Kubo expressions for all transport coefficients, including the diffusiophoretic coupling and the slip coefficient. △ Less

Submitted 4 January, 2024; v1 submitted 29 October, 2023; originally announced October 2023.

Comments: Final published version

Diffusive dynamics of a model protein chain in solution

Authors: Margarita Colberg, Jeremy Schofield

Abstract: A Markov state model is a powerful tool that can be used to track the evolution of populations of configurations in an atomistic representation of a protein. For a coarse-grained linear chain model with discontinuous interactions, the transition rates among states that appear in the Markov model when the monomer dynamics is diffusive can be determined by computing the relative entropy of states an… ▽ More A Markov state model is a powerful tool that can be used to track the evolution of populations of configurations in an atomistic representation of a protein. For a coarse-grained linear chain model with discontinuous interactions, the transition rates among states that appear in the Markov model when the monomer dynamics is diffusive can be determined by computing the relative entropy of states and their mean first passage times, quantities that are unchanged by the specification of the energies of the relevant states. In this paper, we verify the folding dynamics described by a diffusive linear chain model of the crambin protein under three distinct solvent systems, each differing in complexity: a hard-sphere solvent, a solvent undergoing multi-particle collision dynamics, and an implicit solvent model. The predicted transition rates among configurations agree quantitatively with those observed in explicit molecular dynamics simulations for all three solvent models. These results suggest that the local monomer-monomer interactions provide sufficient friction for the monomer dynamics to be diffusive on timescales relevant to changes in conformation. Factors such as structural ordering and dynamic hydrodynamic effects appear to have minimal influence on transition rates within the studied solvent densities. △ Less

Submitted 3 February, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Configurational entropy, transition rates, and optimal interactions for rapid folding in coarse-grained model proteins

Authors: Margarita Colberg, Jeremy Schofield

Abstract: Under certain conditions, the dynamics of coarse-grained models of solvated proteins can be described using a Markov state model, which tracks the evolution of populations of configurations. The transition rates among states that appear in the Markov model can be determined by computing the relative entropy of states and their mean first passage times. In this paper, we present an adaptive method… ▽ More Under certain conditions, the dynamics of coarse-grained models of solvated proteins can be described using a Markov state model, which tracks the evolution of populations of configurations. The transition rates among states that appear in the Markov model can be determined by computing the relative entropy of states and their mean first passage times. In this paper, we present an adaptive method to evaluate the configurational entropy and the mean first passage times for linear chain models with discontinuous potentials. The approach is based on event-driven dynamical sampling in a massively parallel architecture. Using the fact that the transition rate matrix can be calculated for any choice of interaction energies at any temperature, it is demonstrated how each state's energy can be chosen such that the average time to transition between any two states is minimized. The methods are used to analyze the optimization of the folding process of two protein systems: the crambin protein, and a model with frustration and misfolding. It is shown that the folding pathways for both systems are comprised of two regimes: first, the rapid establishment of local bonds, followed by the subsequent formation of more distant contacts. The state energies that lead to the most rapid folding encourage multiple pathways, and either penalize folding pathways through kinetic traps by raising the energies of trapping states, or establish an escape route from the trapping states by lowering free energy barriers to other states that rapidly reach the native state. △ Less

Submitted 23 September, 2022; v1 submitted 11 May, 2022; originally announced May 2022.

Journal ref: J. Chem. Phys. 157, 125101 (2022)

Observing separate spin and charge Fermi seas in a strongly correlated one-dimensional conductor

Authors: P. M. T. Vianez, Y. Jin, M. Moreno, A. S. Anirban, A. Anthore, W. K. Tan, J. P. Griffiths, I. Farrer, D. A. Ritchie, A. J. Schofield, O. Tsyplyatyev, C. J. B. Ford

Abstract: An electron is usually considered to have only one form of kinetic energy, but could it have more, for its spin and charge, by exciting other electrons? In one dimension (1D), the physics of interacting electrons is captured well at low energies by the Tomonaga-Luttinger model, yet little has been observed experimentally beyond this linear regime. Here, we report on measurements of many-body modes… ▽ More An electron is usually considered to have only one form of kinetic energy, but could it have more, for its spin and charge, by exciting other electrons? In one dimension (1D), the physics of interacting electrons is captured well at low energies by the Tomonaga-Luttinger model, yet little has been observed experimentally beyond this linear regime. Here, we report on measurements of many-body modes in 1D gated-wires using tunnelling spectroscopy. We observe two parabolic dispersions, indicative of separate Fermi seas at high energies, associated with spin and charge excitations, together with the emergence of two additional 1D 'replica' modes that strengthen with decreasing wire length. The effective interaction strength is varied by changing the amount of 1D inter-subband screening by over 45%. Our findings demonstrate the existence of spin-charge separation in the whole energy band outside the low-energy limit of validity of the Tomonaga-Luttinger model, and also set a constraint on the validity of the newer nonlinear Tomonaga-Luttinger theory. △ Less

Submitted 1 July, 2022; v1 submitted 10 February, 2021; originally announced February 2021.

Comments: 51 pages, 14 figures

Journal ref: Science Advances 8, eabm2781 (2022)

Molecular theory of Langevin dynamics for active self-diffusiophoretic colloids

Authors: Bryan Robertson, Jeremy Schofield, Pierre Gaspard, Raymond Kapral

Abstract: Active colloidal particles that are propelled by a self-diffusiophoretic mechanism are often described by Langevin equations that are either postulated on physical grounds or derived using the methods of fluctuating hydrodynamics. While these descriptions are appropriate for colloids of micrometric and larger size, they will break down for very small active particles. A fully microscopic derivatio… ▽ More Active colloidal particles that are propelled by a self-diffusiophoretic mechanism are often described by Langevin equations that are either postulated on physical grounds or derived using the methods of fluctuating hydrodynamics. While these descriptions are appropriate for colloids of micrometric and larger size, they will break down for very small active particles. A fully microscopic derivation of Langevin equations for self-diffusiophoretic particles powered by chemical reactions catalyzed asymmetrically by the colloid is given in this paper. The derivation provides microscopic expressions for the translational and rotational friction tensors, as well as reaction rate coefficients appearing in the Langevin equations. The diffusiophoretic force and torque are expressed in terms of nonequilibrium averages of fluid fields that satisfy generalized transport equations. The results provide a description of active motion on small scales where descriptions in terms of coarse grained continuum fluid equations combined with boundary conditions that account for the presence of the colloid may not be appropriate. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 15 pages, 2 figures

Quenched nematic criticality separating two superconducting domes in an iron-based superconductor under pressure

Authors: P. Reiss, D. Graf, A. A. Haghighirad, W. Knafo, L. Drigo, M. Bristow, A. J. Schofield, A. I. Coldea

Abstract: The nematic electronic state and its associated nematic critical fluctuations have emerged as potential candidates for superconducting pairing in various unconventional superconductors. However, in most materials their coexistence with other magnetically-ordered phases poses significant challenges in establishing their importance. Here, by combining chemical and hydrostatic physical pressure in Fe… ▽ More The nematic electronic state and its associated nematic critical fluctuations have emerged as potential candidates for superconducting pairing in various unconventional superconductors. However, in most materials their coexistence with other magnetically-ordered phases poses significant challenges in establishing their importance. Here, by combining chemical and hydrostatic physical pressure in FeSe$_{0.89}$S$_{0.11}$, we provide a unique access to a clean nematic quantum phase transition in the absence of a long-range magnetic order. We find that in the proximity of the nematic phase transition, there is an unusual non-Fermi liquid behavior in resistivity at high temperatures that evolves into a Fermi liquid behaviour at the lowest temperatures. From quantum oscillations in high magnetic fields, we trace the evolution of the Fermi surface and electronic correlations as a function of applied pressure. We detect experimentally a Lifshitz transition that separates two distinct superconducting regions: one emerging from the nematic electronic phase with a small Fermi surface and strong electronic correlations and the other one with a large Fermi surface and weak correlations that promotes nesting and stabilization of a magnetically-ordered phase at high pressures. The lack of mass divergence suggests that the nematic critical fluctuations are quenched by the strong coupling to the lattice. This establishes that superconductivity is not enhanced at the nematic quantum phase transition in the absence of magnetic order. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Comments: 4 figures, 9 pages

Journal ref: Nature Physics (2019)

Single particle motion and collective dynamics in Janus motor systems

Authors: Mu-Jie Huang, Jeremy Schofield, Pierre Gaspard, Raymond Kapral

Abstract: The single-particle and collective dynamics of systems comprising Janus motors, solvent and reactive solute species maintained in nonequilibrium states are investigated. Reversible catalytic reactions with the solute species take place on the catalytic faces of the motors, and the nonequilibrium states are established by imposing either constant-concentration reservoirs that feed and remove reacti… ▽ More The single-particle and collective dynamics of systems comprising Janus motors, solvent and reactive solute species maintained in nonequilibrium states are investigated. Reversible catalytic reactions with the solute species take place on the catalytic faces of the motors, and the nonequilibrium states are established by imposing either constant-concentration reservoirs that feed and remove reactive species, or through out-of-equilibrium fluid phase reactions. We consider general intermolecular interactions between the Janus motor hemispheres and the reactive species. For single motors, we show that the reaction rate depends nonlinearly on an applied external force when the system is displaced far from equilibrium. We also show that a finite-time fluctuation formula derived for fixed catalytic particles describes the nonequilibrium reactive fluctuations of moving Janus motors. Simulation of the collective dynamics of small ensembles of Janus motors with reversible kinetics under nonequilibrium conditions are carried out and the spatial and orientational correlations of dynamic cluster states are discussed. The conditions leading to the instability of the homogeneous motor distribution and the onset of nonequilibrium dynamical clustering are described. △ Less

Submitted 16 November, 2018; originally announced November 2018.

Momentum-dependent power law measured in an interacting quantum wire beyond the Luttinger limit

Authors: Y. Jin, O. Tsyplyatyev, M. Moreno, A. Anthore, W. K. Tan, J. P. Griffiths, I. Farrer, D. A. Ritchie, L. I. Glazman, A. J. Schofield, C. J. B. Ford

Abstract: Power laws in physics have until now always been associated with a scale invariance originating from the absence of a length scale. Recently, an emergent invariance even in the presence of a length scale has been predicted by the newly-developed nonlinear-Luttinger-liquid theory for a one-dimensional (1D) quantum fluid at finite energy and momentum, at which the particle's wavelength provides the… ▽ More Power laws in physics have until now always been associated with a scale invariance originating from the absence of a length scale. Recently, an emergent invariance even in the presence of a length scale has been predicted by the newly-developed nonlinear-Luttinger-liquid theory for a one-dimensional (1D) quantum fluid at finite energy and momentum, at which the particle's wavelength provides the length scale. We present the first experimental example of this new type of power law in the spectral function of interacting electrons in a quantum wire using a transport-spectroscopy technique. The observed momentum dependence of the power law in the high-energy region matches the theoretical predictions, supporting not only the 1D theory of interacting particles beyond the linear regime but also the existence of a new type of universality that emerges at finite energy and momentum. △ Less

Submitted 8 November, 2018; originally announced November 2018.

Journal ref: Nature Communications 10, 2821 (2019)

Dynamics of Janus motors with microscopically reversible kinetics

Authors: Mu-Jie Huang, Jeremy Schofield, Pierre Gaspard, Raymond Kapral

Abstract: Janus motors with chemically active and inactive hemispheres can operate only under nonequilibrium conditions where detailed balance is broken by fluxes of chemical species that establish a nonequilibrium state. A microscopic model for reversible reactive collisions on a Janus motor surface is constructed and shown to satisfy detailed balance. The model is used to study Janus particle reactive dyn… ▽ More Janus motors with chemically active and inactive hemispheres can operate only under nonequilibrium conditions where detailed balance is broken by fluxes of chemical species that establish a nonequilibrium state. A microscopic model for reversible reactive collisions on a Janus motor surface is constructed and shown to satisfy detailed balance. The model is used to study Janus particle reactive dynamics in systems at equilibrium where generalized chemical rate laws that include time-dependent rate coefficients with power-law behavior are shown to describe reaction rates. While maintaining reversible reactions on the Janus catalytic hemisphere, the system is then driven into a nonequilibrium steady state by fluxes of chemical species that control the chemical affinity. The statistical properties of the self-propelled Janus motor in this nonequilibrium steady state are investigated and compared with predictions of a fluctuating thermodynamics theory. The model has utility beyond the examples presented here, since it allows one to explore various aspects of nonequilibrium fluctuations in systems with self-diffusiophoretic motors from a microscopic perspective. △ Less

Submitted 13 March, 2018; originally announced March 2018.

Chemotactic and hydrodynamic effects on collective dynamics of self-diffusiophoretic Janus motors

Authors: Mu-Jie Huang, Jeremy Schofield, Raymond Kapral

Abstract: Collective motion in nonequilibrium steady state suspensions of self-propelled Janus motors driven by chemical reactions can arise due to interactions coming from direct intermolecular forces, hydrodynamic flow effects, or chemotactic effects mediated by chemical gradients. The relative importance of these interactions depends on the reactive characteristics of the motors, the way in which the sys… ▽ More Collective motion in nonequilibrium steady state suspensions of self-propelled Janus motors driven by chemical reactions can arise due to interactions coming from direct intermolecular forces, hydrodynamic flow effects, or chemotactic effects mediated by chemical gradients. The relative importance of these interactions depends on the reactive characteristics of the motors, the way in which the system is maintained in a steady state, and properties of the suspension, such as the volume fraction. From simulations of a microscopic hard collision model for the interaction of fluid particles with the Janus motor we show that dynamic cluster states exist and determine the interaction mechanisms that are responsible for their formation. The relative importance of chemotactic and hydrodynamic effects is identified by considering a microscopic model in which chemotactic effects are turned off while the full hydrodynamic interactions are retained. The system is maintained in a steady state by means of a bulk reaction in which product particles are reconverted into fuel particles. The influence of the bulk reaction rate on the collective dynamics is also studied. △ Less

Submitted 28 July, 2017; originally announced July 2017.

Evolution of the Fermi surface of the nematic superconductors FeSe1-xSx

Authors: A. I. Coldea, S. F. Blake, S. Kasahara, A. A. Haghighirad, M. D. Watson, W. Knafo, E. S. Choi, A. McCollam, P. Reiss, T. Yamashita, M. Bruma, S. Speller, Y. Matsuda, T. Wolf, T. Shibauchi, A. J. Schofield

Abstract: We investigate the evolution of the Fermi surfaces and electronic interactions across the nematic phase transition in single crystals of FeSe1-xSx using Shubnikov-de Haas oscillations in high magnetic fields up to 45 tesla in the low temperature regime. The unusually small and strongly elongated Fermi surface of FeSe increases monotonically with chemical pressure, x, due to the suppression of the… ▽ More We investigate the evolution of the Fermi surfaces and electronic interactions across the nematic phase transition in single crystals of FeSe1-xSx using Shubnikov-de Haas oscillations in high magnetic fields up to 45 tesla in the low temperature regime. The unusually small and strongly elongated Fermi surface of FeSe increases monotonically with chemical pressure, x, due to the suppression of the in-plane anisotropy except for the smallest orbit which suffers a Lifshitz-like transition once nematicity disappears. Even outside the nematic phase the Fermi surface continues to increase, in stark contrast to the reconstructed Fermi surface detected in FeSe under applied external pressure. We detect signatures of orbital-dependent quasiparticle mass renomalization suppressed for those orbits with dominant dxz=yz character, but unusually enhanced for those orbits with dominant dxy character. The lack of enhanced superconductivity outside the nematic phase in FeSe1-xSx suggest that nematicity may not play the essential role in enhancing Tc in these systems. △ Less

Submitted 22 November, 2016; originally announced November 2016.

Comments: 5 pages, 3 figures

Journal ref: npj Quantum Materials volume 4, Article number: 2 (2019)

Microscopic and continuum descriptions of Janus motor fluid flow fields

Authors: Shang Yik Reigh, Mu-Jie Huang, Jeremy Schofield, Raymond Kapral

Abstract: Active media, whose constituents are able to move autonomously, display novel features that differ from those of equilibrium systems. In addition to naturally-occurring active systems such as populations of swimming bacteria, active systems of synthetic self-propelled nanomotors have been developed. These synthetic systems are interesting because of their potential applications in a variety of fie… ▽ More Active media, whose constituents are able to move autonomously, display novel features that differ from those of equilibrium systems. In addition to naturally-occurring active systems such as populations of swimming bacteria, active systems of synthetic self-propelled nanomotors have been developed. These synthetic systems are interesting because of their potential applications in a variety of fields. Janus particles, synthetic motors of spherical geometry with one hemisphere that catalyzes the conversion of fuel to product and one noncatalytic hemisphere, can propel themselves in solution by self-diffusiophoresis. In this mechanism the concentration gradient generated by the asymmetric catalytic activity leads to a force on the motor that induces fluid flows in the surrounding medium. These fluid flows are studied in detail through microscopic simulations of Janus motor motion and continuum theory. It is shown that continuum theory is able to capture many but not all features of the dynamics of the Janus motor and the velocity fields of the fluid. △ Less

Submitted 11 November, 2016; originally announced November 2016.

A microscopic model for chemically-powered Janus motors

Authors: Mu-Jie Huang, Jeremy Schofield, Raymond Kapral

Abstract: Very small synthetic motors that make use of chemical reactions to propel themselves in solution hold promise for new applications in the development of new materials, science and medicine. The prospect of such potential applications, along with the fact that systems with many motors or active elements display interesting cooperative phenomena of fundamental interest, has made the study of synthet… ▽ More Very small synthetic motors that make use of chemical reactions to propel themselves in solution hold promise for new applications in the development of new materials, science and medicine. The prospect of such potential applications, along with the fact that systems with many motors or active elements display interesting cooperative phenomena of fundamental interest, has made the study of synthetic motors an active research area. Janus motors, comprising catalytic and noncatalytic hemispheres, figure prominently in experimental and theoretical studies of these systems. While continuum models of Janus particle systems are often used to describe motor dynamics, microscopic models that are able to account for intermolecular interactions, many-body concentration gradients, fluid flows and thermal fluctuations provide a way to explore the dynamical behavior of these complex out-of-equilibrium systems that does not rely on approximations that are often made in continuum theories. The analysis of microscopic models from first principles provides a foundation from which the range of validity and limitations of approximate theories of the dynamics may be assessed. In this paper, a microscopic model for the diffusiophoretic propulsion of Janus motors, where motor interactions with the environment occur only through hard collisions, is constructed, analyzed and compared to theoretical predictions. Microscopic simulations of both single-motor and many-motor systems are carried out to illustrate the results. △ Less

Submitted 16 May, 2016; originally announced May 2016.

Nonlinear spectra of spinons and holons in short GaAs quantum wires

Authors: M. Moreno, C. J. B. Ford, Y. Jin, J. P. Griffiths, I. Farrer, G. A. C. Jones, D. A. Ritchie, O. Tsyplyatyev, A. J. Schofield

Abstract: One-dimensional electronic fluids are peculiar conducting systems, where the fundamental role of interactions leads to exotic, emergent phenomena, such as spin-charge (spinon-holon) separation. The distinct low-energy properties of these 1D metals are successfully described within the theory of linear Luttinger liquids, but the challenging task of describing their high-energy nonlinear properties… ▽ More One-dimensional electronic fluids are peculiar conducting systems, where the fundamental role of interactions leads to exotic, emergent phenomena, such as spin-charge (spinon-holon) separation. The distinct low-energy properties of these 1D metals are successfully described within the theory of linear Luttinger liquids, but the challenging task of describing their high-energy nonlinear properties has long remained elusive. Recently, novel theoretical approaches accounting for nonlinearity have been developed, yet the rich phenomenology that they predict remains barely explored experimentally. Here, we probe the nonlinear spectral characteristics of short GaAs quantum wires by tunnelling spectroscopy, using an advanced device consisting of 6000 wires. We find evidence for the existence of an inverted (spinon) shadow band in the main region of the particle sector, one of the central predictions of the new nonlinear theories. A (holon) band with reduced effective mass is clearly visible in the particle sector at high energies. △ Less

Submitted 15 September, 2016; v1 submitted 9 November, 2015; originally announced November 2015.

Comments: 8 pages, 6 figures; definitive published version

Journal ref: Nature Communications 7, 12784 (2016)

Nature of the many-body excitations in a quantum wire: theory and experiment

Authors: O. Tsyplyatyev, A. J. Schofield, Y. Jin, M. Moreno, W. K. Tan, A. S. Anirban, C. J. B. Ford, J. P. Griffiths, I. Farrer, G. A. C. Jones, D. A. Ritchie

Abstract: The natural excitations of an interacting one-dimensional system at low energy are hydrodynamic modes of Luttinger liquid, protected by the Lorentz invariance of the linear dispersion. We show that beyond low energies, where quadratic dispersion reduces the symmetry to Galilean, the main character of the many-body excitations changes into a hierarchy: calculations of dynamic correlation functions… ▽ More The natural excitations of an interacting one-dimensional system at low energy are hydrodynamic modes of Luttinger liquid, protected by the Lorentz invariance of the linear dispersion. We show that beyond low energies, where quadratic dispersion reduces the symmetry to Galilean, the main character of the many-body excitations changes into a hierarchy: calculations of dynamic correlation functions for fermions (without spin) show that the spectral weights of the excitations are proportional to powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions and $L$ is the system length. Thus only small numbers of excitations carry the principal spectral power in representative regions on the energy-momentum planes. We have analysed the spectral function in detail and have shown that the first-level (strongest) excitations form a mode with parabolic dispersion, like that of a renormalised single particle. The second-level excitations produce a singular power-law line shape to the first-level mode and multiple power-laws at the spectral edge. We have illustrated crossover to Luttinger liquid at low energy by calculating the local density of state through all energy scales: from linear to non-linear, and to above the chemical potential energies. In order to test this model, we have carried out experiments to measure momentum-resolved tunnelling of electrons (fermions with spin) from/to a wire formed within a GaAs heterostructure. We observe well-resolved spin-charge separation at low energy with appreciable interaction strength and only a parabolic dispersion of the first-level mode at higher energies. We find structure resembling the second-level excitations, which dies away rapidly at high momentum in line with the theoretical predictions here. △ Less

Submitted 28 August, 2015; originally announced August 2015.

Comments: 23 pages, 10 figures, 2 tables

Journal ref: Phys. Rev. B 93, 075147 (2016)

Quantum Multicriticality

Authors: G. T. Oliver, A. J. Schofield

Abstract: Several quantum critical compounds have been argued to have multiple instabilities towards orders with distinct dynamical exponents. We present an analysis of a quantum multicritical point in an itinerant magnet with competition between ferro- and antiferromagnetic order, modelled using Hertz-Millis theory. We perform a one-loop renormalization group treatment of this action in the presence of two… ▽ More Several quantum critical compounds have been argued to have multiple instabilities towards orders with distinct dynamical exponents. We present an analysis of a quantum multicritical point in an itinerant magnet with competition between ferro- and antiferromagnetic order, modelled using Hertz-Millis theory. We perform a one-loop renormalization group treatment of this action in the presence of two dynamical exponents. In two and in three dimensions, when both incipient orders are quantum critical, we find that the specific heat, thermal expansion and Grüneisen parameter obey the same power laws as those expected for a single ferromagnetic quantum critical point. The antiferromagnetic correlation length and boundary of the antiferromagnetic ordered phase are suppressed by the dangerously irrelevant interactions with quantum critical ferromagnetic fluctuations. We find no difference between a quantum bicritical point and a quantum tetracritical point. Our results are compared with experiments on NbFe$_2$. △ Less

Submitted 9 June, 2015; originally announced June 2015.

Comments: 5 pages, 3 figures

Dichotomy between the hole and electrons behavior in the multiband FeSe probed by ultra high magnetic fields

Authors: M. D. Watson, T. Yamashita, S. Kasahara, W. Knafo, M. Nardone, J. Beard, F. Hardy, A. McCollam, A. Narayanan, S. F. Blake, T. Wolf, A. A. Haghighirad, C. Meingast, A. J. Schofield, H. von Lohneysen, Y. Matsuda, A. I. Coldea, T. Shibauchi

Abstract: Magnetoresistivity \r{ho}xx and Hall resistivity \r{ho}xy in ultra high magnetic fields up to 88T are measured down to 0.15K to clarify the multiband electronic structure in high-quality single crystals of superconducting FeSe. At low temperatures and high fields we observe quantum oscillations in both resistivity and Hall effect, confirming the multiband Fermi surface with small volumes. We propo… ▽ More Magnetoresistivity \r{ho}xx and Hall resistivity \r{ho}xy in ultra high magnetic fields up to 88T are measured down to 0.15K to clarify the multiband electronic structure in high-quality single crystals of superconducting FeSe. At low temperatures and high fields we observe quantum oscillations in both resistivity and Hall effect, confirming the multiband Fermi surface with small volumes. We propose a novel and independent approach to identify the sign of corresponding cyclotron orbit in a compensated metal from magnetotransport measurements. The observed significant differences in the relative amplitudes of the quantum oscillations between the \r{ho}xx and \r{ho}xy components, together with the positive sign of the high-field \r{ho}xy , reveal that the largest pocket should correspond to the hole band. The low-field magnetotransport data in the normal state suggest that, in addition to one hole and one almost compensated electron bands, the orthorhombic phase of FeSe exhibits an additional tiny electron pocket with a high mobility. △ Less

Submitted 10 February, 2015; originally announced February 2015.

Comments: Latex, 4 pages (2 figures, 1 table), and supplemental material

Journal ref: Phys. Rev. Lett. 115, 027006 (2015)

Emergence of the nematic electronic state in FeSe

Authors: M. D. Watson, T. K. Kim, A. A. Haghighirad, N. R. Davies, A. McCollam, A. Narayanan, S. F. Blake, Y. L. Chen, S. Ghannadzadeh, A. J. Schofield, M. Hoesch, C. Meingast, T. Wolf, A. I. Coldea

Abstract: We present a comprehensive study of the evolution of the nematic electronic structure of FeSe using high resolution angle-resolved photoemission spectroscopy (ARPES), quantum oscillations in the normal state and elastoresistance measurements. Our high resolution ARPES allows us to track the Fermi surface deformation from four-fold to two-fold symmetry across the structural transition at ~87 K whic… ▽ More We present a comprehensive study of the evolution of the nematic electronic structure of FeSe using high resolution angle-resolved photoemission spectroscopy (ARPES), quantum oscillations in the normal state and elastoresistance measurements. Our high resolution ARPES allows us to track the Fermi surface deformation from four-fold to two-fold symmetry across the structural transition at ~87 K which is stabilized as a result of the dramatic splitting of bands associated with dxz and dyz character. The low temperature Fermi surface is that a compensated metal consisting of one hole and two electron bands and is fully determined by combining the knowledge from ARPES and quantum oscillations. A manifestation of the nematic state is the significant increase in the nematic susceptibility as approaching the structural transition that we detect from our elastoresistance measurements on FeSe. The dramatic changes in electronic structure cannot be explained by the small lattice effects and, in the absence of magnetic fluctuations above the structural transition, points clearly towards an electronically driven transition in FeSe stabilized by orbital-charge ordering. △ Less

Submitted 10 February, 2015; originally announced February 2015.

Comments: Latex, 8 pages, 4 figures

Journal ref: Phys. Rev. B 91, 155106 (2015)

Derivation of a Markov state model of the dynamics of a protein-like chain immersed in an implicit solvent

Authors: Jeremy Schofield, Hanif Bayat

Abstract: A Markov state model of the dynamics of a protein-like chain immersed in an implicit hard sphere solvent is derived from first principles for a system of monomers that interact via discontinuous potentials designed to account for local structure and bonding in a coarse-grained sense. The model is based on the assumption that the implicit solvent interacts on a fast time scale with the monomers of… ▽ More A Markov state model of the dynamics of a protein-like chain immersed in an implicit hard sphere solvent is derived from first principles for a system of monomers that interact via discontinuous potentials designed to account for local structure and bonding in a coarse-grained sense. The model is based on the assumption that the implicit solvent interacts on a fast time scale with the monomers of the chain compared to the time scale for structural rearrangements of the chain and provides sufficient friction so that the motion of monomers is governed by the Smoluchowski equation. A microscopic theory for the dynamics of the system is developed that reduces to a Markovian model of the kinetics under well-defined conditions. Microscopic expressions for the rate constants that appear in the Markov state model are analyzed and expressed in terms of a temperature-dependent linear combination of escape rates that themselves are independent of temperature. The Markov model is studied by analyzing the eigenvalues and eigenvectors of the matrix of transition rates, and the equilibration process for a simple helix-forming system from an ensemble of initially extended configurations to mainly folded configurations is investigated as a function of temperature for a number of different chain lengths. For short chains, the relaxation is primarily single-exponential and becomes independent of temperature in the low-temperature regime. The profile is more complicated for longer chains, where multi-exponential relaxation behavior is seen at intermediate temperatures followed by a low temperature regime in which the folding becomes rapid and single exponential. It is demonstrated that the behavior of the equilibration profile as the temperature is lowered can be understood in terms of the number of relaxation modes or ``folding pathways'' that contribute to the evolution of the state populations. △ Less

Submitted 26 August, 2014; originally announced August 2014.

Comments: 18 pages, 9 figures, to appear in Journal of Chemical Physics

Hierarchy of modes in an interacting system

Authors: O. Tsyplyatyev, A. J. Schofield, Y. Jin, M. Moreno, W. K. Tan, C. J. B. Ford, J. P. Griffiths, I. Farrer, G. A. C. Jones, D. A. Ritchie

Abstract: Studying interacting fermions in 1D at high energy, we find a hierarchy in the spectral weights of the excitations theoretically and we observe evidence for second-level excitations experimentally. Diagonalising a model of fermions (without spin), we show that levels of the hierarchy are separated by powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions a… ▽ More Studying interacting fermions in 1D at high energy, we find a hierarchy in the spectral weights of the excitations theoretically and we observe evidence for second-level excitations experimentally. Diagonalising a model of fermions (without spin), we show that levels of the hierarchy are separated by powers of $\mathcal{R}^{2}/L^{2}$, where $\mathcal{R}$ is a length-scale related to interactions and $L$ is the system length. The first-level (strongest) excitations form a mode with parabolic dispersion, like that of a renormalised single particle. The second-level excitations produce a singular power-law line shape to the first-level mode and multiple power-laws at the spectral edge. We measure momentum-resolved tunnelling of electrons (fermions with spin) from/to a wire formed within a GaAs heterostructure, which shows parabolic dispersion of the first-level mode and well-resolved spin-charge separation at low energy with appreciable interaction strength. We find structure resembling the second-level excitations, which dies away quite rapidly at high momentum. △ Less

Submitted 13 August, 2014; originally announced August 2014.

Comments: 5 pages, 3 figures, 1 table

Journal ref: Phys. Rev. Lett. 114, 196401 (2015)

Spectral edge mode in interacting one-dimensional systems

Authors: O. Tsyplyatyev, A. J. Schofield

Abstract: A continuum of excitations in interacting one-dimensional systems is bounded from below by a spectral edge that marks the lowest possible excitation energy for a given momentum. We analyse short-range interactions between Fermi particles and between Bose particles (with and without spin) using Bethe-Ansatz techniques and find that the dispersions of the corresponding spectral edge modes are close… ▽ More A continuum of excitations in interacting one-dimensional systems is bounded from below by a spectral edge that marks the lowest possible excitation energy for a given momentum. We analyse short-range interactions between Fermi particles and between Bose particles (with and without spin) using Bethe-Ansatz techniques and find that the dispersions of the corresponding spectral edge modes are close to a parabola in all cases. Based on this emergent phenomenon we propose an empirical model of a free, non-relativistic particle with an effective mass identified at low energies as the bare electron mass renormalised by the dimensionless Luttinger parameter $K$ (or $K_σ$ for particles with spin). The relevance of the Luttinger parameters beyond the low energy limit provides a more robust method for extracting them experimentally using a much wide range of data from the bottom of the one-dimensional band to the Fermi energy. The empirical model of the spectral edge mode complements the mobile impurity model to give a description of the excitations in proximity of the edge at arbitrary momenta in terms of only the low energy parameters and the bare electron mass. Within such a framework, for example, exponents of the spectral function are expressed explicitly in terms of only a few Luttinger parameters. △ Less

Submitted 11 March, 2014; originally announced March 2014.

Comments: 11 pages, 7 figures

Journal ref: Phys. Rev. B 90, 014309 (2014)

Luttinger parameters of interacting fermions in 1D at high energies

Authors: O. Tsyplyatyev, A. J. Schofield

Abstract: Interactions between electrons in one-dimension are fully described at low energies by only a few parameters of the Tomonaga-Luttinger model which is based on linearisation of the spectrum. We consider a model of spinless fermions with a short range interaction via the Bethe-Ansatz technique and show that a Luttinger parameter emerges in an observable beyond the low energy limit. A distinct featur… ▽ More Interactions between electrons in one-dimension are fully described at low energies by only a few parameters of the Tomonaga-Luttinger model which is based on linearisation of the spectrum. We consider a model of spinless fermions with a short range interaction via the Bethe-Ansatz technique and show that a Luttinger parameter emerges in an observable beyond the low energy limit. A distinct feature of the spectral function, the edge that marks the lowest possible excitation energy for a given momentum, is parabolic for arbitrary momenta and the prefactor is a function of the Luttinger parameter, K. △ Less

Submitted 2 July, 2013; originally announced July 2013.

Comments: 7 pages, 4 figures

Journal ref: Phys. Rev. B 88, 115142 (2013)

Hall effect in heavy-fermion metals

Authors: Sunil Nair, S. Wirth, S. Friedemann, F. Steglich, Q. Si, A. J. Schofield

Abstract: The heavy fermion systems present a unique platform in which strong electronic correlations give rise to a host of novel, and often competing, electronic and magnetic ground states. Amongst a number of potential experimental tools at our disposal, measurements of the Hall effect have emerged as a particularly important one in discerning the nature and evolution of the Fermi surfaces of these enigm… ▽ More The heavy fermion systems present a unique platform in which strong electronic correlations give rise to a host of novel, and often competing, electronic and magnetic ground states. Amongst a number of potential experimental tools at our disposal, measurements of the Hall effect have emerged as a particularly important one in discerning the nature and evolution of the Fermi surfaces of these enigmatic metals. In this article, we present a comprehensive review of Hall effect measurements in the heavy-fermion materials, and examine the success it has had in contributing to our current understanding of strongly correlated matter. Particular emphasis is placed on its utility in the investigation of quantum critical phenomena which are thought to drive many of the exotic electronic ground states in these systems. This is achieved by the description of measurements of the Hall effect across the putative zero-temperature instability in the archetypal heavy-fermion metal YbRh$_2$Si$_2$. Using the Ce$M$In$_5$ (with $M =$ Co, Ir) family of systems as a paradigm, the influence of (antiferro-)magnetic fluctuations on the Hall effect is also illustrated. This is compared to prior Hall effect measurements in the cuprates and other strongly correlated systems to emphasize on the generality of the unusual magnetotransport in materials with non-Fermi liquid behavior. △ Less

Submitted 2 October, 2012; originally announced October 2012.

Comments: manuscript accepted in Adv. Phys

Journal ref: Advances in Physics, 61, 583 (2012)

Simulation of tethered oligomers in nanochannels using multi-particle collision dynamics

Authors: Riyad Raghu, Jeremy Schofield

Abstract: The effect of a high Reynold's number, pressure-driven flow of a compressible gas on the conformation of an oligomer tethered to the wall of a square-channel is studied under both ideal solvent and poor solvent conditions using a hybrid multiparticle collision dynamics and molecular dynamics algorithm. Unlike previous studies, the flow field contains an elongational component in addition to a shea… ▽ More The effect of a high Reynold's number, pressure-driven flow of a compressible gas on the conformation of an oligomer tethered to the wall of a square-channel is studied under both ideal solvent and poor solvent conditions using a hybrid multiparticle collision dynamics and molecular dynamics algorithm. Unlike previous studies, the flow field contains an elongational component in addition to a shear component as well as fluid slip near the walls and results in a Schmidt number for the polymer beads that is less than unity. In both solvent regimes the oligomer is found to extend in the direction of flow. Under the ideal solvent conditions, torsional twisting of the chain and aperiodic cyclical dynamics are observed for the end of the oligomer. Under poor solvent conditions, a metastable helix forms in the end of the chain despite the lack of any attractive potential between beads in the oligomeric chain. The formation of the helix is postulated to be the result of a solvent induced chain collapse that has been confined to a single dimension by a strong flow field. △ Less

Submitted 22 June, 2012; originally announced June 2012.

Comments: 15 pages, 13 figures, to appear in J. Chem. Phys., 2012

Modeling of solvent flow effects in enzyme catalysis under physiological conditions

Authors: Jeremy Schofield, Paul Inder, Raymond Kapral

Abstract: A stochastic model for the dynamics of enzymatic catalysis in explicit, effective solvents under physiological conditions is presented. Analytically-computed first passage time densities of a diffusing particle in a spherical shell with absorbing boundaries are combined with densities obtained from explicit simulation to obtain the overall probability density for the total reaction cycle time of t… ▽ More A stochastic model for the dynamics of enzymatic catalysis in explicit, effective solvents under physiological conditions is presented. Analytically-computed first passage time densities of a diffusing particle in a spherical shell with absorbing boundaries are combined with densities obtained from explicit simulation to obtain the overall probability density for the total reaction cycle time of the enzymatic system. The method is used to investigate the catalytic transfer of a phosphoryl group in a phosphoglycerate kinase-ADP-bis phosphoglycerate system, one of the steps of glycolysis. The direct simulation of the enzyme-substrate binding and reaction is carried out using an elastic network model for the protein, and the solvent motions are described by multiparticle collision dynamics, which incorporates hydrodynamic flow effects. Systems where solvent-enzyme coupling occurs through explicit intermolecular interactions, as well as systems where this coupling is taken into account by including the protein and substrate in the multiparticle collision step, are investigated and compared with simulations where hydrodynamic coupling is absent. It is demonstrated that the flow of solvent particles around the enzyme facilitates the large-scale hinge motion of the enzyme with bound substrates, and has a significant impact on the shape of the probability densities and average time scales of substrate binding for substrates near the enzyme, the closure of the enzyme after binding, and the overall time of completion of the cycle. △ Less

Submitted 13 March, 2012; originally announced March 2012.

Comments: 15 pages in double column format

Free Energy Landscape of a Protein-Like Chain in a Fluid with Discontinuous Potentials

Authors: Hanif Bayat Movahed, Ramses van Zon, Jeremy Schofield

Abstract: The free energy landscape of a protein-like chain in a fluid was studied by combining discontinuous molecular dynamics and parallel tempering. The model protein is a repeating sequence of four different beads, with interactions mimicking those in real proteins. Neighbor distances and angles are restricted to physical ranges and one out of the four kinds of beads can form hydrogen bonds with each o… ▽ More The free energy landscape of a protein-like chain in a fluid was studied by combining discontinuous molecular dynamics and parallel tempering. The model protein is a repeating sequence of four different beads, with interactions mimicking those in real proteins. Neighbor distances and angles are restricted to physical ranges and one out of the four kinds of beads can form hydrogen bonds with each other, except if they are too close in the chain. In contrast to earlier studies of this model, an explicit square-well solvent is included. Beads that can form intra-chain hydrogen bonds, can also form (weaker) hydrogen bonds with solvent molecules, while other beads are insoluble. By categorizing the protein configurations according to their intra-chain bonds, one can distinguish unfolded, helical, and collapsed helical structures. Simulations for chains of 15, 20 and 25 beads show that at low temperatures, the most likely structures are helical or collapsed helical, despite the low entropy of these structures. The temperature at which helical structures become dominant is higher than in the absence of a solvent. The cooperative effect of the solvent is attributed to the presence of hydrophobic beads. A phase transition of the solvent prevented the simulations of the 20-bead and 25-bead chains of reaching low enough temperatures to confirm whether the free energy landscape is funnel-shaped, although the results do not contradict that possibility. △ Less

Submitted 15 December, 2011; originally announced December 2011.

Comments: 12 pages, 10 figures

Free Energy Landscape of Protein-like Chains with Discontinuous Potentials

Authors: Hanif Bayat Movahed, Ramses van Zon, Jeremy Schofield

Abstract: In this article the configurational space of two simple protein models consisting of polymers composed of a periodic sequence of four different kinds of monomers is studied as a function of temperature. In the protein models, hydrogen bond interactions, electrostatic repulsion, and covalent bond vibrations are modeled by discontinuous step, shoulder and square-well potentials, respectively. The pr… ▽ More In this article the configurational space of two simple protein models consisting of polymers composed of a periodic sequence of four different kinds of monomers is studied as a function of temperature. In the protein models, hydrogen bond interactions, electrostatic repulsion, and covalent bond vibrations are modeled by discontinuous step, shoulder and square-well potentials, respectively. The protein-like chains exhibit a secondary alpha helix structure in their folded states at low temperatures, and allow a natural definition of a configuration by considering which beads are bonded. Free energies and entropies of configurations are computed using the parallel tempering method in combination with hybrid Monte Carlo sampling of the canonical ensemble of the discontinuous potential system. The probability of observing the most common configuration is used to analyze the nature of the free energy landscape, and it is found that the model with the least number of possible bonds exhibits a funnel-like free energy landscape at low enough temperature for chains with fewer than 30 beads. For longer proteins, the landscape consists of several minima, where the configuration with the lowest free energy changes significantly by lowering the temperature and the probability of observing the most common configuration never approaches one due to the degeneracy of the lowest accessible potential energy. △ Less

Submitted 23 March, 2012; v1 submitted 14 August, 2011; originally announced August 2011.

Comments: Added a discussion of a three state model as comparison, and an example of the folded configuration. 13 pages, 14 figures

Probing spin-charge separation in a Tomonaga-Luttinger liquid

Authors: Y. Jompol, C. J. B. Ford, J. P. Griffiths, I. Farrer, G. A. C. Jones, D. Anderson, D. A. Ritchie, T. W. Silk, A. J. Schofield

Abstract: In a one-dimensional (1D) system of interacting electrons, excitations of spin and charge travel at different speeds, according to the theory of a Tomonaga-Luttinger Liquid (TLL) at low energies. However, the clear observation of this spin-charge separation is an ongoing challenge experimentally. We have fabricated an electrostatically-gated 1D system in which we observe spin-charge separation a… ▽ More In a one-dimensional (1D) system of interacting electrons, excitations of spin and charge travel at different speeds, according to the theory of a Tomonaga-Luttinger Liquid (TLL) at low energies. However, the clear observation of this spin-charge separation is an ongoing challenge experimentally. We have fabricated an electrostatically-gated 1D system in which we observe spin-charge separation and also the predicted power-law suppression of tunnelling into the 1D system. The spin-charge separation persists even beyond the low-energy regime where the TLL approximation should hold. TLL effects should therefore also be important in similar, but shorter, electrostatically gated wires, where interaction effects are being studied extensively worldwide. △ Less

Submitted 14 February, 2010; originally announced February 2010.

Comments: 11 pages, 4 PDF figures, uses scicite.sty, Science.bst

Journal ref: Science 325 (2009) 597-601

Quantum Criticality and Novel Phases: Summary and Outlook

Authors: A. J. Schofield

Abstract: This conference summary and outlook provides a personal overview of the topics and themes of the August 2009 Dresden meeting on quantum criticality and novel phases. The dichotomy between the local moment and the itinerant views of magnetism is revisited and refreshed in new materials, new probes and new theoretical ideas. New universality and apparent zero temperature phases of matter move us b… ▽ More This conference summary and outlook provides a personal overview of the topics and themes of the August 2009 Dresden meeting on quantum criticality and novel phases. The dichotomy between the local moment and the itinerant views of magnetism is revisited and refreshed in new materials, new probes and new theoretical ideas. New universality and apparent zero temperature phases of matter move us beyond the old ideas of quantum criticality. This is accompanied by alternative pairing interactions and as yet unidentified phases developing in the vicinity of quantum critical points. In discussing novel order, the magnetic analogues of superconductivity are considered as candidate states for the hidden order that sometimes develops in the vicinity of quantum critical points in metallic systems. These analogues can be thought of as "pairing" in the particle-hole channel and are tabulated. This analogy is used to outline a framework to study the relation between ferromagnetic fluctuations and the propensity of a metal to nematic type phases which at weak coupling correspond to Pomeranchuk instabilities. This question can be related to the fundamental relations of Fermi liquid theory. △ Less

Submitted 24 January, 2010; originally announced January 2010.

Comments: Conference summary for the 2009 Dresden Meeting on Quantum Criticality and Novel Phases. 7 pages and 4 figures. The associated presentation may be found at http://www.theory.bham.ac.uk/staff/schofield/talks/Dresden/

Constructing smooth potentials of mean force, radial, distribution functions and probability densities from sampled data

Authors: Ramses van Zon, Jeremy Schofield

Abstract: In this paper a method of obtaining smooth analytical estimates of probability densities, radial distribution functions and potentials of mean force from sampled data in a statistically controlled fashion is presented. The approach is general and can be applied to any density of a single random variable. The method outlined here avoids the use of histograms, which require the specification of a… ▽ More In this paper a method of obtaining smooth analytical estimates of probability densities, radial distribution functions and potentials of mean force from sampled data in a statistically controlled fashion is presented. The approach is general and can be applied to any density of a single random variable. The method outlined here avoids the use of histograms, which require the specification of a physical parameter (bin size) and tend to give noisy results. The technique is an extension of the Berg-Harris method [B.A. Berg and R.C. Harris, Comp. Phys. Comm. 179, 443 (2008)], which is typically inaccurate for radial distribution functions and potentials of mean force due to a non-uniform Jacobian factor. In addition, the standard method often requires a large number of Fourier modes to represent radial distribution functions, which tends to lead to oscillatory fits. It is shown that the issues of poor sampling due to a Jacobian factor can be resolved using a biased resampling scheme, while the requirement of a large number of Fourier modes is mitigated through an automated piecewise construction approach. The method is demonstrated by analyzing the radial distribution functions in an energy-discretized water model. In addition, the fitting procedure is illustrated on three more applications for which the original Berg-Harris method is not suitable, namely, a random variable with a discontinuous probability density, a density with long tails, and the distribution of the first arrival times of a diffusing particle to a sphere, which has both long tails and short-time structure. In all cases, the resampled, piecewise analytical fit outperforms the histogram and the original Berg-Harris method. △ Less

Submitted 3 March, 2010; v1 submitted 2 December, 2009; originally announced December 2009.

Comments: 14 pages, 15 figures. To appear in J. Chem. Phys

Journal ref: J. Chem.Phys. 132, 154110 (2010)

Thermoelectric Effects in Anisotropic Systems: Measurement and Applications

Authors: T. W. Silk, A. J. Schofield

Abstract: The Harman method for measuring the thermal conductivity of a sample using the Peltier effect, may also be used to determine the dimensionless figure of merit from just two electrical resistance measurements. We consider a modified version of the Harman method where the current contacts are much smaller than the contact faces of the sample. We calculate the voltage and temperature distributions… ▽ More The Harman method for measuring the thermal conductivity of a sample using the Peltier effect, may also be used to determine the dimensionless figure of merit from just two electrical resistance measurements. We consider a modified version of the Harman method where the current contacts are much smaller than the contact faces of the sample. We calculate the voltage and temperature distributions in a rectangular sample of a material having anisotropy in all of its transport coefficients. The thermoelectric anisotropy has important consequences in the form of thermoelectric eddy currents and the Bridgman effect. We prove that in the limit of a very thin sample of arbitrary shape, there exist van der Pauw formulae relating particular linear combinations of the potential and temperature differences between points on the edges of the sample. We show that the Harman figure of merit can be radically different from the intrinsic figures of merit of the material, and can often be substantially enhanced. By defining an effective figure of merit in terms of the rate of entropy production, we show that the increase in the Harman figure of merit does indicate an improvement in the thermoelectric performance of an anisotropic sample having small current contacts. However, we also prove that in the case of a material with tetragonal symmetry, the effective figure of merit is always bounded from above by the largest intrinsic figure of merit of the material. △ Less

Submitted 26 August, 2008; originally announced August 2008.

Comments: 27 pages, 15 eps figures

The precursor state to superconductivity in CeIrIn${_5}$: Unusual scaling of magnetotransport

Authors: Sunil Nair, M. Nicklas, F. Steglich, J. L. Sarrao, J. D. Thompson, A. J. Schofield, S. Wirth

Abstract: We present an analysis of the normal-state Hall effect and magnetoresistance in the heavy fermion superconductor CeIrIn${_5}$. It is demonstrated that the modified Kohler's scaling--which relates the magnetoresistance to the Hall angle--breaks down prior to the onset of superconductivity due to the presence of a precursor state to superconductivity in this system. A model-independent, single-par… ▽ More We present an analysis of the normal-state Hall effect and magnetoresistance in the heavy fermion superconductor CeIrIn${_5}$. It is demonstrated that the modified Kohler's scaling--which relates the magnetoresistance to the Hall angle--breaks down prior to the onset of superconductivity due to the presence of a precursor state to superconductivity in this system. A model-independent, single-parameter scaling of the Hall angle governed solely by this precursor state is observed. Neither the Hall coefficient nor the resistivity exhibit this scaling implying that this precursor state preferentially influences the Hall channel. △ Less

Submitted 18 August, 2008; originally announced August 2008.

Quantum free energy differences from non-equilibrium path integrals: II. Convergence properties for the harmonic oscillator

Authors: Ramses van Zon, Lisandro Hernandez de la Pena, Gilles H. Peslherbe, Jeremy Schofield

Abstract: Non-equilibrium path integral methods for computing quantum free energy differences are applied to a quantum particle trapped in a harmonic well of uniformly changing strength with the purpose of establishing the convergence properties of the work distribution and free energy as the number of degrees of freedom M in the regularized path integrals goes to infinity. The work distribution is found… ▽ More Non-equilibrium path integral methods for computing quantum free energy differences are applied to a quantum particle trapped in a harmonic well of uniformly changing strength with the purpose of establishing the convergence properties of the work distribution and free energy as the number of degrees of freedom M in the regularized path integrals goes to infinity. The work distribution is found to converge when M tends to infinity regardless of the switching speed, leading to finite results for the free energy difference when the Jarzynski non-equilibrium work relation or the Crooks fluctuation relation are used. The nature of the convergence depends on the regularization method. For the Fourier method, the convergence of the free energy difference and work distribution go as 1/M, while both quantities converge as 1/M^2 when the bead regularization procedure is used. The implications of these results to more general systems are discussed. △ Less

Submitted 29 August, 2008; v1 submitted 2 July, 2008; originally announced July 2008.

Comments: 26 pages, 6 figures. Added clarifying remarks and fixed typos

Quantum free energy differences from non-equilibrium path integrals: I. Methods and numerical application

Authors: Ramses van Zon, Lisandro Hernandez de la Pena, Gilles H. Peslherbe, Jeremy Schofield

Abstract: The imaginary-time path integral representation of the canonical partition function of a quantum system and non-equilibrium work fluctuation relations are combined to yield methods for computing free energy differences in quantum systems using non-equilibrium processes. The path integral representation is isomorphic to the configurational partition function of a classical field theory, to which… ▽ More The imaginary-time path integral representation of the canonical partition function of a quantum system and non-equilibrium work fluctuation relations are combined to yield methods for computing free energy differences in quantum systems using non-equilibrium processes. The path integral representation is isomorphic to the configurational partition function of a classical field theory, to which a natural but fictitious Hamiltonian dynamics is associated. It is shown that if this system is prepared in an equilibrium state, after which a control parameter in the fictitious Hamiltonian is changed in a finite time, then formally the Jarzynski non-equilibrium work relation and the Crooks fluctuation relation are shown to hold, where work is defined as the change in the energy as given by the fictitious Hamiltonian. Since the energy diverges for the classical field theory in canonical equilibrium, two regularization methods are introduced which limit the number of degrees of freedom to be finite. The numerical applicability of the methods is demonstrated for a quartic double-well potential with varying asymmetry. A general parameter-free smoothing procedure for the work distribution functions is useful in this context. △ Less

Submitted 29 August, 2008; v1 submitted 2 July, 2008; originally announced July 2008.

Comments: 20 pages, 4 figures. Added clarifying remarks and fixed typos

Symmetry-breaking Fermi surface deformations from central interactions in two dimensions

Authors: J. Quintanilla, M. Haque, A. J. Schofield

Abstract: We present a mean field theory of the Pomeranchuk instability in two dimensions, starting from a generic central interaction potential described in terms of a few microscopic parameters. For a significant range of parameters, the instability is found to be pre-empted by a first-order quantum phase transition. We provide the ground state phase diagram in terms of our generic parameters. We present a mean field theory of the Pomeranchuk instability in two dimensions, starting from a generic central interaction potential described in terms of a few microscopic parameters. For a significant range of parameters, the instability is found to be pre-empted by a first-order quantum phase transition. We provide the ground state phase diagram in terms of our generic parameters. △ Less

Submitted 30 July, 2008; v1 submitted 29 May, 2008; originally announced May 2008.

Comments: 9 pages, 3 figures

Journal ref: Phys. Rev. B 78, 035131 (2008) (Editors' suggestion)

Event-Driven Dynamics of Rigid Bodies Interacting via Discretized Potentials

Authors: Ramses van Zon, Jeremy Schofield

Abstract: A framework for performing event-driven, adaptive time step simulations of systems of rigid bodies interacting under stepped or terraced potentials in which the potential energy is only allowed to have discrete values is outlined. The scheme is based on a discretization of an underlying continuous potential that effectively determines the times at which interaction energies change. As in most ev… ▽ More A framework for performing event-driven, adaptive time step simulations of systems of rigid bodies interacting under stepped or terraced potentials in which the potential energy is only allowed to have discrete values is outlined. The scheme is based on a discretization of an underlying continuous potential that effectively determines the times at which interaction energies change. As in most event-driven approaches, the method consists of specifying a means of computing the free motion, evaluating the times at which interactions occur, and determining the consequences of interactions on subsequent motion for the terraced-potential. The latter two aspects are shown to be simply expressible in terms of the underlying smooth potential. Within this context, algorithms for computing the times of interaction events and carrying out efficient event-driven simulations are discussed. The method is illustrated on system composed of rigid rods in which the constituents interact via a terraced potential that depends on the relative orientations of the rods. △ Less

Submitted 21 December, 2007; originally announced December 2007.

Comments: 9 pages, 5 figures

Journal ref: J. Chem. Phys. 128, 154119 (2008)

Efficient algorithms for rigid body integration using optimized splitting methods and exact free rotational motion

Authors: Ramses van Zon, Igor P. Omelyan, Jeremy Schofield

Abstract: Hamiltonian splitting methods are an established technique to derive stable and accurate integration schemes in molecular dynamics, in which additional accuracy can be gained using force gradients. For rigid bodies, a tradition exists in the literature to further split up the kinetic part of the Hamiltonian, which lowers the accuracy. The goal of this note is to comment on the best combination o… ▽ More Hamiltonian splitting methods are an established technique to derive stable and accurate integration schemes in molecular dynamics, in which additional accuracy can be gained using force gradients. For rigid bodies, a tradition exists in the literature to further split up the kinetic part of the Hamiltonian, which lowers the accuracy. The goal of this note is to comment on the best combination of optimized splitting and gradient methods that avoids splitting the kinetic energy. These schemes are generally applicable, but the optimal scheme depends on the desired level of accuracy. For simulations of liquid water it is found that the velocity Verlet scheme is only optimal for crude simulations with accuracies larger than 1.5%, while surprisingly a modified Verlet scheme (HOA) is optimal up to accuracies of 0.4% and a fourth order gradient scheme (GIER4) is optimal for even higher accuracies. △ Less

Submitted 8 February, 2008; v1 submitted 17 October, 2007; originally announced October 2007.

Comments: 2 pages, 1 figure. Added clarifying comments. Accepted for publication in the Journal of Chemical Physics

Journal ref: J. Chem. Phys. 128, 136102 (2008)

Probing e-e interactions in a periodic array of GaAs quantum wires

Authors: Y. Jompol, C. J. B. Ford, I. Farrer, G. A. C. Jones, D. Anderson, D. A. Ritchie, T. W. Silk, A. J. Schofield

Abstract: We present the results of non-linear tunnelling spectroscopy between an array of independent quantum wires and an adjacent two-dimensional electron gas (2DEG) in a double-quantum-well structure. The two layers are separately contacted using a surface-gate scheme, and the wires are all very regular, with dimensions chosen carefully so that there is minimal modulation of the 2DEG by the gates defi… ▽ More We present the results of non-linear tunnelling spectroscopy between an array of independent quantum wires and an adjacent two-dimensional electron gas (2DEG) in a double-quantum-well structure. The two layers are separately contacted using a surface-gate scheme, and the wires are all very regular, with dimensions chosen carefully so that there is minimal modulation of the 2DEG by the gates defining the wires. We have mapped the dispersion spectrum of the 1D wires down to the depletion of the last 1D subband by measuring the conductance \emph{G} as a function of the in-plane magnetic field \emph{B}, the interlayer bias $V_{\rm dc}$ and the wire gate voltage. There is a strong suppression of tunnelling at zero bias, with temperature and dc-bias dependences consistent with power laws, as expected for a Tomonaga-Luttinger Liquid caused by electron-electron interactions in the wires. In addition, the current peaks fit the free-electron model quite well, but with just one 1D subband there is extra structure that may indicate interactions. △ Less

Submitted 5 August, 2007; v1 submitted 2 August, 2007; originally announced August 2007.

Comments: 3 pages, 3 figures; formatting corrected

Effect of disorder on a Pomeranchuk instability

Authors: A. F. Ho, A. J. Schofield

Abstract: We study the effect of disorder on the order parameter equation and transition temperature of a Pomeranchuk-type Fermi-surface instability using replica mean field theory. We consider the example of a phase transition to a $d_{x^2 +y^2}$ type Fermi surface distortion, and show that, in the regime where such a transition is second order, the transition temperature is reduced by disorder in essent… ▽ More We study the effect of disorder on the order parameter equation and transition temperature of a Pomeranchuk-type Fermi-surface instability using replica mean field theory. We consider the example of a phase transition to a $d_{x^2 +y^2}$ type Fermi surface distortion, and show that, in the regime where such a transition is second order, the transition temperature is reduced by disorder in essentially the same way as that for a d-wave superconductor. We argue that observing this disorder dependence of metal-to-metal transition might be a useful indicator of a finite angular momentum Fermi surface distortion. △ Less

Submitted 20 February, 2009; v1 submitted 13 June, 2007; originally announced June 2007.

Comments: 4.1 pages, 3 figs. Version as published in EPL. Added data of Sr3Ru2O7 to theory curves of Fig.2, and some clarification of derivation of results

Journal ref: European Physics Letters 84, p.27007 (2008)

Pomeranchuk instability: symmetry breaking and experimental signatures

Authors: J. Quintanilla, C. Hooley, B. J. Powell, A. J. Schofield, M. Haque

Abstract: We discuss the emergence of symmetry-breaking {\it via} the Pomeranchuk instability from interactions that respect the underlying point-group symmetry. We use a variational mean-field theory to consider a 2D continuum and a square lattice. We describe two experimental signatures: a symmetry-breaking pattern of Friedel oscillations around an impurity; and a structural transition. We discuss the emergence of symmetry-breaking {\it via} the Pomeranchuk instability from interactions that respect the underlying point-group symmetry. We use a variational mean-field theory to consider a 2D continuum and a square lattice. We describe two experimental signatures: a symmetry-breaking pattern of Friedel oscillations around an impurity; and a structural transition. △ Less

Submitted 25 April, 2008; v1 submitted 17 April, 2007; originally announced April 2007.

Comments: corrected typos, added and updated references, better-resolution figures

Journal ref: Physica B: Condensed Matter 403, 1279-1281 (2008) [Proceedings of SCES'07]

Symplectic algorithms for simulations of rigid body systems using the exact solution of free motion

Authors: Ramses van Zon, Jeremy Schofield

Abstract: Elegant integration schemes of second and fourth order for simulations of rigid body systems are presented which treat translational and rotational motion on the same footing. This is made possible by a recent implementation of the exact solution of free rigid body motion. The two schemes are time-reversible, symplectic, and exactly respect conservation principles for both the total linear and a… ▽ More Elegant integration schemes of second and fourth order for simulations of rigid body systems are presented which treat translational and rotational motion on the same footing. This is made possible by a recent implementation of the exact solution of free rigid body motion. The two schemes are time-reversible, symplectic, and exactly respect conservation principles for both the total linear and angular momentum vectors. Simulations of simple test systems show that the second order scheme is stable and conserves all constants of the motion to high precision. Furthermore, the schemes are demonstrated to be more accurate and efficient than existing methods, except for high densities, in which case the second order scheme performs at least as well, showing their general applicability. Finally, it is demonstrated that the fourth order scheme is more efficient than the second order scheme provided the time step is smaller than a system-dependent threshold value. △ Less

Submitted 17 May, 2007; v1 submitted 15 December, 2006; originally announced December 2006.

Comments: 5 pages, 1 figure; An implementation of the integrator can be found at http://www.chem.utoronto.ca/~rzon/Code.html

Journal ref: Phys. Rev. E 75, 056701 (2007)

Numerical implementation of the exact dynamics of free rigid bodies

Authors: Ramses van Zon, Jeremy Schofield

Abstract: In this paper the exact analytical solution of the motion of a rigid body with arbitrary mass distribution is derived in the absence of forces or torques. The resulting expressions are cast into a form where the dependence of the motion on initial conditions is explicit and the equations governing the orientation of the body involve only real numbers. Based on these results, an efficient method… ▽ More In this paper the exact analytical solution of the motion of a rigid body with arbitrary mass distribution is derived in the absence of forces or torques. The resulting expressions are cast into a form where the dependence of the motion on initial conditions is explicit and the equations governing the orientation of the body involve only real numbers. Based on these results, an efficient method to calculate the location and orientation of the rigid body at arbitrary times is presented. This implementation can be used to verify the accuracy of numerical integration schemes for rigid bodies, to serve as a building block for event-driven discontinuous molecular dynamics simulations of general rigid bodies, and for constructing symplectic integrators for rigid body dynamics. △ Less

Submitted 18 December, 2006; v1 submitted 20 July, 2006; originally announced July 2006.

Comments: Shortened paper with updated references, 28 pages, 3 figures

Journal ref: J. Comput. Phys. 225, 145-164 (2007)

Discontinuous Molecular Dynamics for Rigid Bodies: Applications

Authors: Lisandro Hernandez de la Pena, Ramses van Zon, Jeremy Schofield, Sheldon B. Opps

Abstract: Event-driven molecular dynamics simulations are carried out on two rigid body systems which differ in the symmetry of their molecular mass distributions. First, simulations of methane in which the molecules interact via discontinuous potentials are compared with simulations in which the molecules interact through standard continuous Lennard-Jones potentials. It is shown that under similar condit… ▽ More Event-driven molecular dynamics simulations are carried out on two rigid body systems which differ in the symmetry of their molecular mass distributions. First, simulations of methane in which the molecules interact via discontinuous potentials are compared with simulations in which the molecules interact through standard continuous Lennard-Jones potentials. It is shown that under similar conditions of temperature and pressure, the rigid discontinuous molecular dynamics method reproduces the essential dynamical and structural features found in continuous-potential simulations at both gas and liquid densities. Moreover, the discontinuous molecular dynamics approach is demonstrated to be between 2 to 100 times more efficient than the standard molecular dynamics method depending on the specific conditions of the simulation. The rigid discontinuous molecular dynamics method is also applied to a discontinuous-potential model of a liquid composed of rigid benzene molecules, and equilibrium and dynamical properties are shown to be in qualitative agreement with more detailed continuous-potential models of benzene. Qualitative differences in the dynamics of the two models are related to the relatively crude treatment of variations in the repulsive interactions as one benzene molecule rotates by another. △ Less

Submitted 20 July, 2006; originally announced July 2006.

Comments: 14 pages, double column revtex

Journal ref: J. Chem. Phys. 126, 074106 (2007)

Discontinuous Molecular Dynamics for Semi-Flexible and Rigid Bodies

Authors: Lisandro Hernandez de la Pena, Ramses van Zon, Jeremy Schofield, Sheldon B. Opps

Abstract: A general framework for performing event-driven simulations of systems with semi-flexible or rigid bodies interacting under impulsive torques and forces is outlined. Two different approaches are presented. In the first, the dynamics and interaction rules are derived from Lagrangian mechanics in the presence of constraints. This approach is most suitable when the body is composed of relatively fe… ▽ More A general framework for performing event-driven simulations of systems with semi-flexible or rigid bodies interacting under impulsive torques and forces is outlined. Two different approaches are presented. In the first, the dynamics and interaction rules are derived from Lagrangian mechanics in the presence of constraints. This approach is most suitable when the body is composed of relatively few point masses or is semi-flexible. In the second method, the equations of rigid bodies are used to derive explicit analytical expressions for the free evolution of arbitrary rigid molecules and to construct a simple scheme for computing interaction rules. Efficient algorithms for the search for the times of interaction events are designed in this context, and the handling of missed interaction events is discussed. △ Less

Submitted 20 July, 2006; originally announced July 2006.

Comments: 16 pages, double column revtex

Journal ref: J. Chem. Phys. 126, 074105 (2007)

Out-of-plane thermopower of strongly correlated layered systems: an application to Bi_2(Sr,La)_2CaCu_2O_{8+δ}

Authors: T. W. Silk, I. Terasaki, T. Fujii, A. J. Schofield

Abstract: We calculate the out-of-plane thermopower in a quasi-two dimensional system, and argue that this quantity is an effective probe of the asymmetry of the single-particle spectral function. We find that the temperature and doping dependence of the out-of-plane thermopower in Bi_2(Sr,La)_2CaCu_2O_{8+δ} single crystals is broadly consistent with the behavior of the spectral function determined from A… ▽ More We calculate the out-of-plane thermopower in a quasi-two dimensional system, and argue that this quantity is an effective probe of the asymmetry of the single-particle spectral function. We find that the temperature and doping dependence of the out-of-plane thermopower in Bi_2(Sr,La)_2CaCu_2O_{8+δ} single crystals is broadly consistent with the behavior of the spectral function determined from ARPES and tunneling experiments. We also investigate the relationship between out-of-plane thermopower and entropy in a quasi-two dimensional material. We present experimental evidence that at moderate temperatures, there is a qualitative correspondence between the out-of-plane thermopower in Bi_2(Sr,La)_2CaCu_2O_{8+δ}, and the entropy obtained from specific heat measurements. Finally, we argue that the derivative of the entropy with respect to particle number may be the more appropriate quantity to compare with the thermopower, rather than the entropy per particle. △ Less

Submitted 12 March, 2009; v1 submitted 5 July, 2006; originally announced July 2006.

Comments: 11 pages, 5 figures. v2: substantially rewritten, including a more detailed analysis of the relationship between thermopower and entropy

Pomeranchuk and Topological Fermi Surface Instabilities from Central Interactions

Authors: J. Quintanilla, A. J. Schofield

Abstract: We address at the mean field level the emergence of a Pomeranchuk instability in a uniform Fermi liquid with \emph{central} particle-particle interactions. We find that Pomeranchuk instabilities with all symmetries except $l=1$ can take place if the interaction is repulsive and has a finite range $r_{0}$ of the order of the inter-particle distance. We demonstrate this by solving the mean field e… ▽ More We address at the mean field level the emergence of a Pomeranchuk instability in a uniform Fermi liquid with \emph{central} particle-particle interactions. We find that Pomeranchuk instabilities with all symmetries except $l=1$ can take place if the interaction is repulsive and has a finite range $r_{0}$ of the order of the inter-particle distance. We demonstrate this by solving the mean field equations analytically for an explicit model interaction, as well as numerical results for more realistic potentials. We find in addition to the Pomeranchuk instability other, subtler phase transitions in which the Fermi surface changes topology without rotational symmetry-breaking. We argue that such interaction-driven topological transitions may be as generic to such systems as the Pomeranchuk instability. △ Less

Submitted 29 September, 2006; v1 submitted 5 January, 2006; originally announced January 2006.

Comments: Published version (added references, typos corrected)

Journal ref: Phys. Rev. B 74, 115126 (2006)

Breakdown of weak-field magnetotransport at a metallic quantum critical point

Authors: J. Fenton, A. J. Schofield

Abstract: We show how the collapse of an energy scale in a quantum critical metal can lead to physics beyond the weak-field limit usually used to compute transport quantities. For a density-wave transition we show that the presence of a finite magnetic field at the critical point leads to discontinuities in the transport coefficients as temperature tends to zero. The origin of these discontinuities lies i… ▽ More We show how the collapse of an energy scale in a quantum critical metal can lead to physics beyond the weak-field limit usually used to compute transport quantities. For a density-wave transition we show that the presence of a finite magnetic field at the critical point leads to discontinuities in the transport coefficients as temperature tends to zero. The origin of these discontinuities lies in the breakdown of the weak field Jones-Zener expansion which has previously been used to argue that magneto-transport coefficients are continuous at simple quantum critical points. The presence of potential scattering and magnetic breakdown rounds the discontinuities over a window determined by tau Delta < 1 where Delta is the order parameter and tau is the quasiparticle elastic lifetime. △ Less

Submitted 11 July, 2005; originally announced July 2005.

Comments: 4 pages, 3 figures RevTeX format

Report number: NSF-KITP-05-42

Journal ref: Phys. Rev. Lett. 95, 247201 (2005)

Transport anomalies in a simplified model for a heavy electron quantum critical point

Authors: P. Coleman, J. B. Marston, A. J. Schofield

Abstract: We discuss the transport anomalies associated with the development of heavy electrons out of a neutral spin fluid using the large-N treatment of the Kondo-Heisenberg lattice model. At the phase transition in this model the spin excitations suddenly acquire charge. The Higgs process by which this takes place causes the constraint gauge field to loosely ``lock'' together with the external, electro… ▽ More We discuss the transport anomalies associated with the development of heavy electrons out of a neutral spin fluid using the large-N treatment of the Kondo-Heisenberg lattice model. At the phase transition in this model the spin excitations suddenly acquire charge. The Higgs process by which this takes place causes the constraint gauge field to loosely ``lock'' together with the external, electromagnetic gauge field. From this perspective, the heavy fermion phase is a Meissner phase in which the field representing the difference between the electromagnetic and constraint gauge field, is excluded from the material. We show that at the transition into the heavy fermion phase, both the linear and the Hall conductivity jump together. However, the Drude weight of the heavy electron fluid does not jump at the quantum critical point, but instead grows linearly with the distance from the quantum critical point, forming a kind of ``gossamer'' Fermi-liquid. △ Less

Submitted 5 July, 2005; v1 submitted 30 June, 2005; originally announced July 2005.

Comments: 15 pages, 3 figures. Small change in references in v2

Journal ref: Phys. Rev. B 72, 245111 (2005).

Mode-coupling theory for multiple-time correlation functions of tagged particle densities and dynamical filters designed for glassy systems

Authors: Ramses van Zon, Jeremy Schofield

Abstract: The theoretical framework for higher-order correlation functions involving multiple times and multiple points in a classical, many-body system developed by Van Zon and Schofield [Phys. Rev. E 65, 011106 (2002)] is extended here to include tagged particle densities. Such densities have found an intriguing application as proposed measures of dynamical heterogeneities in structural glasses. The the… ▽ More The theoretical framework for higher-order correlation functions involving multiple times and multiple points in a classical, many-body system developed by Van Zon and Schofield [Phys. Rev. E 65, 011106 (2002)] is extended here to include tagged particle densities. Such densities have found an intriguing application as proposed measures of dynamical heterogeneities in structural glasses. The theoretical formalism is based upon projection operator techniques which are used to isolate the slow time evolution of dynamical variables by expanding the slowly-evolving component of arbitrary variables in an infinite basis composed of the products of slow variables of the system. The resulting formally exact mode-coupling expressions for multiple-point and multiple-time correlation functions are made tractable by applying the so-called N-ordering method. This theory is used to derive for moderate densities the leading mode coupling expressions for indicators of relaxation type and domain relaxation, which use dynamical filters that lead to multiple-time correlations of a tagged particle density. The mode coupling expressions for higher order correlation functions are also succesfully tested against simulations of a hard sphere fluid at relatively low density. △ Less

Submitted 29 April, 2005; originally announced April 2005.

Comments: 15 pages, 2 figures

Journal ref: J. Phys. Chem. B 109, 21425-21436 (2005)