Showing 1–4 of 4 results for author: Schmutz, P

Local electrochemical characterization of active Mg-Fe materials: from pure Mg to Mg50-Fe composites

Authors: Noémie Ott, Aurélien Tournier Fillon, Oliver Renk, Thomas Kremmer, Stefan Pogatscher, Thomas Suter, Patrik Schmutz

Abstract: This study demonstrates the applicability of the scanning electrochemical nanocapillary (SEN) technique to characterize the local surface reactivity of active systems, such as Mg-based materials. Owing to its confined electrolyte configuration, one undeniable strength of the method is to provide with unprecedented resolution direct visualization and assessment of the presence, distribution and nob… ▽ More This study demonstrates the applicability of the scanning electrochemical nanocapillary (SEN) technique to characterize the local surface reactivity of active systems, such as Mg-based materials. Owing to its confined electrolyte configuration, one undeniable strength of the method is to provide with unprecedented resolution direct visualization and assessment of the presence, distribution and nobility of different phases. High lateral resolution open-circuit potential (OCP) scans on single Fe-rich particles in Mg confirms that these particles serve as local cathodes while evidencing enhanced surface activation at the interfacial area between the particle and the Mg matrix. Valuable insights about nanoscale galvanic coupling within an intermetallic particle can therefore be retrieved, which are otherwise not accessible. On more complex systems, such as Mg50-Fe composites, the SEN technique allows individual assessment of the reactivity of the different microscale phases. By combining OCP scans and local potentiodynamic polarization measurements, we reveal that changes in surface reactivity and stability of Mg-rich phases in these composites are directly correlated to their different microstructure, i.e. phase spacing and composition, which are intrinsically linked to their processing parameters. The SEN technique is therefore an excellent tool to help us refine our mechanistic understanding of initial stages of corrosion in heterogeneous materials. △ Less

Submitted 11 July, 2024; originally announced July 2024.

High-resolution neutron imaging: a new approach to characterize water in anodic aluminum oxides

Authors: Noemie Ott, Claudia Cancellieri, Pavel Trtik, Patrik Schmutz

Abstract: During the growth of anodic Al oxide layers water incorporates in the film and therefore influences the intrinsic properties of the oxide formed. In this study, we propose a new approach, based on the use of high-resolution neutron imaging, to visualize and quantify the water content in porous Al oxides as a function of anodizing conditions. Water in these porous films is either incorporated direc… ▽ More During the growth of anodic Al oxide layers water incorporates in the film and therefore influences the intrinsic properties of the oxide formed. In this study, we propose a new approach, based on the use of high-resolution neutron imaging, to visualize and quantify the water content in porous Al oxides as a function of anodizing conditions. Water in these porous films is either incorporated directly in the oxide structure (structural) and/or fills the pores (morphological). This preliminary study demonstrates that the differences in water content of porous anodic Al oxide layers are strongly related to the oxide growth parameters but interestingly cannot be directly correlated to a specific change in the amorphous oxide structure or in the pore morphology. Due to the high sensitivity of high-resolution neutron imaging to small changes in the water content, we furthermore show that the morphological water content in Al oxides formed in sulfuric acid as well as in phosphoric acid is partially reversible upon heat treatment and immersion. High-resolution neutron imaging is also found to be highly sensitive to structural disorder and crystallographic orientations, allowing to identify different crystalline Al oxide samples based on their structural and morphological defect content. This offers new perspectives to study the effect of the hydrogen and/or water incorporation as well as oxide-related structural modifications on Al oxihydroxides in relation to growth parameters, stability, functionalization as well as properties tuning, highly relevant to surface protection and their use as templates. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Advanced chemical state studies of oxide films by lab-based HAXPES combining soft and hard X-ray sources

Authors: S. Siol, J. Mann, J. Newman, T. Miyayama, K. Watanabe, P. Schmutz, C. Cancellieri, L. P. H. Jeurgens

Abstract: The greater information depth provided in Hard X-ray Photoelectron Spectroscopy (HAXPES) enables non-destructive analyses of the chemistry and electronic structure of buried interfaces. Moreover, for industrially relevant elements like Al, Si and Ti, the combined access to the Al 1s, Si 1s or Ti 1s photoelectron line and its associated Al KLL, Si KLL or Ti KLL Auger transition, as required for loc… ▽ More The greater information depth provided in Hard X-ray Photoelectron Spectroscopy (HAXPES) enables non-destructive analyses of the chemistry and electronic structure of buried interfaces. Moreover, for industrially relevant elements like Al, Si and Ti, the combined access to the Al 1s, Si 1s or Ti 1s photoelectron line and its associated Al KLL, Si KLL or Ti KLL Auger transition, as required for local chemical state analysis on the basis of the Auger parameter, is only possible with hard X-rays. Until now, such photoemission studies were only possible at synchrotron facilities. Recently however, the first commercial XPS/HAXPES systems, equipped with both soft and hard X-ray sources, have entered the market, providing unique opportunities for monitoring the local chemical state of all constituent ions in functional oxides at different probing depths, in a routine laboratory environment. Bulk-sensitive shallow core-levels can be excited using either the hard or soft X-ray source, whereas more surface-sensitive deep core-level photoelectron lines and associated Auger transitions can be measured using the hard X-ray source. As demonstrated for thin Al2O3, SiO2 and TiO2 films, the local chemical state of the constituting ions in the oxide may even be probed at near constant probing depth by careful selection of sets of photoelectron and Auger lines, as excited with the combined soft and hard X-ray sources. We highlight the potential of lab-based HAXPES for the research on functional oxides and also discuss relevant technical details regarding the calibration of the kinetic binding energy scale. △ Less

Submitted 1 November, 2019; originally announced November 2019.

A combinatorial guide to phase formation and surface passivation of tungsten titanium oxide prepared by thermal oxidation

Authors: Sebastian Siol, Noémie Ott, Michael Stiefel, Max Döbeli, Patrik Schmutz, Lars P. H. Jeurgens, Claudia Cancellieri

Abstract: TiO$_2$ and WO$_3$ are two of the most important earth-abundant electronic materials with applications in countless industries. Recently alloys of WO$_3$ and TiO$_2$ have been investigated leading to improvements of key performance indicators for a variety of applications ranging from photo-electrochemical water splitting to electrochromic smart windows. These positive reports and the complexity o… ▽ More TiO$_2$ and WO$_3$ are two of the most important earth-abundant electronic materials with applications in countless industries. Recently alloys of WO$_3$ and TiO$_2$ have been investigated leading to improvements of key performance indicators for a variety of applications ranging from photo-electrochemical water splitting to electrochromic smart windows. These positive reports and the complexity of the ternary W-Ti-O phase diagram motivate a comprehensive experimental screening of this phase space. Using combinatorial thermal oxidation of solid solution W$_{1-x}$Ti$_{x}$ precursors combined with bulk and surface analysis mapping we investigate the oxide phase formation and surface passivation of tungsten titanium oxide in the entire compositional range from pure WO$_3$ to TiO$_2$. The system shows a remarkable structural transition from monoclinic over cubic to tetragonal symmetry with increasing Ti concentration. In addition, a strong Ti surface enrichment is observed for precursor Ti-concentrations in excess of 55 at.%, resulting in the formation of a protective rutile-structured TiO$_2$ surface layer. Despite the structural transitions, the optical properties of the oxide alloys remain largely unaltered demonstrating an independent control of multiple functional properties in W$_{1-x}$Ti$_{x}$O$_{n}$. The results from this study provide valuable guidelines for future development of W$_{1-x}$Ti$_{x}$O$_{n}$ for electronic and energy applications, but also novel engineering approaches for surface functionalization and additive manufacturing of Ti-based alloys. △ Less

Submitted 27 August, 2019; originally announced August 2019.