-
Precipitation in lean Mg-Zn-Ca alloys
Authors:
R. E. Schaublin,
M. Becker,
M. Cihova,
S. S. A. Gerstl,
D. Deiana,
C. Hebert,
S. Pogatscher,
P. J. Uggowitzer,
J. F. Loffler
Abstract:
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were o…
▽ More
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about room temperature to 400 C, with a particular focus on the debated ternary precipitate phase. Three exothermic differential scanning calorimetry (DSC) peaks were observed at 125, 250 and 320 C. The microstructure at the end of these peaks (205, 260 and 350 C) was probed in a multiscale correlative approach using atom probe tomography (APT) and transmission electron microscopy (TEM). At 205 C, APT analysis revealed Ca-rich, Zn-rich and Zn-Ca-rich clusters of about 3 nm in size and with a number density of 5.7 x 10^23 m^-3. At 260 C, APT and TEM showed mono-layered Zn-Ca-rich Guinier-Preston (GP) zones of about 8 nm in size and with a number density of 1.3 x 10^23 m^-3. At 350 C, there are larger, highly coherent elongated precipitates of about 50 nm in size, in a lower number density, and of two types: either binary Mg2Ca precipitates or less numerous ternary Ca2Mg6Zn3 precipitates, as deduced from scanning TEM-based energy dispersive X-ray spectrometry (EDS) and nanodiffraction in TEM. The highest hardening, probed by Vickers testing, relates to the end of the 125 C DSC peak and thus to GP zones, which outperform the hardening induced by the nanoscale clusters and the larger intermetallic particles. Precipitation in ZX20 upon linear heating was compared to the one induced by hot extrusion at 330 C. Here, ternary precipitates outnumber the binary ones and are larger, incoherent, and in a much lower number density. They are unequivocally made of hexagonal Ca2Mg5Zn5, as deduced by atomically resolved EDS mapping and scanning TEM imaging, and supported by simulations. Precipitation complexity of in lean Mg-Zn-Ca alloys and its kinetic path are discussed.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Temperature dependence of magnetization processes in Sm(Co,Fe,Cu,Zr)$_z$ magnets with different nanoscale microstructures
Authors:
Leonardo Pierobon,
Robin E. Schäublin,
András Kovács,
Stephan S. A. Gerstl,
Alexander Firlus,
Urs V. Wyss,
Rafal E. Dunin-Borkowski,
Michalis Charilaou,
Jörg F. Löffler
Abstract:
The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the indi…
▽ More
The characteristic microstructure of Sm(Co,Fe,Cu,Zr)$_z$ alloys with SmCo$_5$ cell walls in Sm$_2$Co$_{17}$ cells, all intersected by Zr-rich platelets, makes them some of the best performing high-temperature permanent magnets. Plentiful research has been performed to tailor the microstructure at the nanoscale, but due to its complexity many questions remain unanswered about the effect of the individual phases on the magnetic performance at different temperatures. Here, we explore this mechanism effect for three different Sm(Co,Fe,Cu,Zr)$_z$ alloys by deploying high-resolution magnetic imaging via in-situ transmission electron microscopy and three-dimensional chemical analysis using atom probe tomography. We show that their microstructures differ in terms of SmCo$_5$ cell-wall and Z-phase size and density, as well as the Cu concentration in the cell walls, and demonstrate how these features influence the magnetic domain size and density and thus form different magnetic textures. Moreover, we illustrate that the dominant coercivity mechanism at room temperature is domain-wall pinning and show that magnets with a denser cell-wall network, a steeper Cu gradient across the cell-wall boundary, and thinner Z-phase platelets have a higher coercivity. We also show that the coercivity mechanism at high temperatures is domain-wall nucleation at the cell walls. Increasing the Cu concentration inside the cell walls decreases the transition temperature between pinning and nucleation, significantly decreasing the coercivity with increasing temperature. We therefore provide a detailed explanation of how the microstructure on the atomic to nanoscale directly affects the magnetic performance and provide detailed guidelines for an improved design of Sm(Co,Fe,Cu,Zr)$_z$ magnets.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Unconventional magnetization textures and domain-wall pinning in Sm-Co magnets
Authors:
Leonardo Pierobon,
András Kovács,
Robin E. Schäublin,
S. S. A. Gerstl,
J. Caron,
Urs Wyss,
Rafal E. Dunin-Borkowski,
Jörg F. Löffler,
Michalis Charilaou
Abstract:
The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performanc…
▽ More
The most powerful magnets for high temperature applications are Sm-Co-based alloys with a microstructure that combines magnetically soft and hard regions. The microstructure consists of a dense domain-wall-pinning network that endows the material with remarkable magnetic hardness. A precise understanding of the coupling between magnetism and microstructure is essential for enhancing the performance of Sm-Co magnets, but experiments and theory have not yet converged to a unified model. Here, we combine transmission electron microscopy, atom probe tomography, and nanometer-resolution off-axis electron holography with micromagnetic simulations to show that the magnetization processes in Sm-Co magnets result from an interplay between curling instabilities and pinning effects at the intersections between magnetically soft and hard regions. We also find that topologically non-trivial magnetic domains separated by a complex network of domain walls play a key role in the magnetic state. Our findings reveal a previously hidden aspect of magnetism and provide insight into the full potential of high-performance magnetic materials.
△ Less
Submitted 14 October, 2019; v1 submitted 7 January, 2019;
originally announced January 2019.
