-
Experimental determination of effective light transport properties in fully anisotropic media
Authors:
Ernesto Pini,
Peter Naglič,
Miran Bürmen,
Alexander Gatto,
Henrik Schäfer,
Diederik S. Wiersma,
Lorenzo Pattelli
Abstract:
Structurally anisotropic materials are ubiquitous in several application fields, yet their accurate optical characterization remains challenging due to the lack of general models linking their scattering coefficients to the macroscopic transport observables, and the need to combine multiple measurements to retrieve their direction-dependent values. Here, we present an improved method for the exper…
▽ More
Structurally anisotropic materials are ubiquitous in several application fields, yet their accurate optical characterization remains challenging due to the lack of general models linking their scattering coefficients to the macroscopic transport observables, and the need to combine multiple measurements to retrieve their direction-dependent values. Here, we present an improved method for the experimental determination of light transport tensor coefficients from the diffusive rates measured along all three directions, based on transient transmittance measurements and a generalized Monte Carlo model. We apply our method to the characterization of light transport properties in two common anisotropic materials - polytetrafluoroethylene (PTFE) tape and paper - highlighting the magnitude of systematic deviations that are typically incurred when neglecting anisotropy.
△ Less
Submitted 29 March, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Diffusion of light in structurally anisotropic media with uniaxial symmetry
Authors:
Ernesto Pini,
Fabrizio Martelli,
Alexander Gatto,
Henrik Schäfer,
Diederik S. Wiersma,
Lorenzo Pattelli
Abstract:
Anisotropic light transport is extremely common among scattering materials, yet a comprehensive picture of how macroscopic diffusion is determined by microscopic tensor scattering coefficients is not fully established yet. In this work, we present a theoretical and experimental study of diffusion in structurally anisotropic media with uniaxially symmetric scattering coefficients. Exact analytical…
▽ More
Anisotropic light transport is extremely common among scattering materials, yet a comprehensive picture of how macroscopic diffusion is determined by microscopic tensor scattering coefficients is not fully established yet. In this work, we present a theoretical and experimental study of diffusion in structurally anisotropic media with uniaxially symmetric scattering coefficients. Exact analytical relations are derived in the case of index-matched turbid media, unveiling the general relation between microscopic scattering coefficients and the resulting macroscopic diffusion tensor along different directions. Excellent agreement is found against anisotropic Monte Carlo simulations up to high degrees of anisotropy, in contrast with previously proposed approaches. The obtained solutions are used to analyze experimental measurements of anisotropic light transport in polystyrene foam samples under different degrees of uniaxial compression, providing a practical example of their applicability.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Nanostructured submicron block copolymer dots by sacrificial stamping: a potential preconcentration platform for locally resolved sensing, chemistry and cellular interactions
Authors:
Peilong Hou,
Weijia Han,
Michael Philippi,
Helmut Schäfer,
Martin Steinhart
Abstract:
Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto s…
▽ More
Classical contact lithography involves patterning of surfaces by embossing or by transfer of ink. We report direct lithographic transfer of parts of sacrificial stamps onto counterpart surfaces. Using sacrificial stamps consisting of the block copolymer polystyrene-block-poly(2-pyridine) (PS-b-P2VP), we deposited arrays of nanostructured submicron PS-b-P2VP dots with heights of about 100 nm onto silicon wafers and glass slides. The sacrificial PS-b-P2VP stamps were topographically patterned with truncated-pyramidal contact elements and penetrated by spongy-continuous nanopore systems. The spongy nature of the sacrificial PS-b-P2VP stamps supported formation of adhesive contact to the counterpart surfaces and the rupture of the contact elements during stamp retraction. The submicron PS-b-P2VP dots generated by sacrificial stamping can be further functionalized, examples include loading submicron PS-b-P2VP dots with dyes and attachment of gold nanoparticles to their outer surfaces. The arrays of submicron PS-b-P2VP dots can be integrated into setups for advanced optical microscopy, total internal reflection fluorescence microscopy or Raman microscopy. Arrays of nanostructured submicron block copolymer dots may represent a preconcentration platform for locally resolved sensing and locally resolved monitoring of cellular interactions or might be used as microreactor arrays in lab-on-chip configurations.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Electrooxidation of a cobalt based steel in LiOH: a non-noble metal based electro-catalyst suitable for durable water-splitting in an acidic milieu
Authors:
Helmut Schäfer,
Karsten Küpper,
Klaus Müller-Buschbaum,
Diemo Daum,
Martin Steinhart,
Joachim Wollschläger,
Ulrich Krupp,
Mercedes Schmidt,
Weijia Hana,
Johannes Stangl
Abstract:
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, R…
▽ More
The use of proton exchange membrane (PEM) electrolyzers is the method of choice for the conversion of solar energy when frequently occurring changes of the current load are an issue. However, this technique requires electrolytes with low pH. All oxygen evolving electrodes working durably and actively in acids contain IrOx. Due to their scarcity and high acquisition costs, noble elements like Pt, Ru and Ir need to be replaced by earth abundant elements. We have evaluated a cobalt containing steel for use as an oxygen-forming electrode in H2SO4. We found that the dissolving of ingredients out of the steel electrode at oxidative potential in sulfuric acid, which is a well-known, serious issue, can be substantially reduced when the steel is electro-oxidized in LiOH prior to electrocatalysis. Under optimized synthesis conditions a cobalt-containing tool steel was rendered into a durable oxygen evolution reaction (OER) electrocatalyst (weight loss: 39 mug mm-2 after 50 000 s of chronopotentiometry at pH 1) that exhibits overpotentials down to 574 mV at 10 mA cm-2 current density at pH 1. Focused ion beam SEM FIB-SEM) was successfully used to create a structure-stability relationship.
△ Less
Submitted 28 November, 2017;
originally announced December 2017.
-
X20CoCrWMo10-9//Co3O4: a Metal-Ceramic Composite with Unique Efficiency Values for Water-Splitting in Neutral Regime
Authors:
Helmut Schäfer,
Daniel M. Chevrier,
Karsten Küpper,
Peng Zhang,
Joachim Wollschläger,
Diemo Daum,
Martin Steinhart,
Claudia Heß,
Ulrich Krupp,
Mercedes Schmidt
Abstract:
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in…
▽ More
Water splitting allows the storage of solar energy into chemical bonds (H2+O2) and will help to implement the urgently needed replacement of limited available fossil fuels. Particularly in neutral environment electrochemically initiated water splitting suffers from low efficiency due to high overpotentials caused by the anode. Electro-activation of X20CoCrWMo10-9, a Co-based tool steel resulted in a new composite material (X20CoCrWMo10-9//Co3O4) that catalyzes the anode half-cell reaction of water electrolysis with a so far unequalled effectiveness. The current density achieved with this new anode in pH 7 corrected 0.1 M phosphate buffer is over a wide range of overpotentials around 10 times higher compared to recently developed, up-to-date electrocatalysts and represents the benchmark performance advanced catalysts show in regimes that support water splitting significantly better than pH 7 medium. X20CoCrWMo10-9//Co3O4 exhibited electrocatalytic properties not only at pH 7, but also at pH 13, which is much superior to the ones of IrO2-RuO2, single-phase Co3O4- or Fe/Ni- based catalysts. Both XPS and FT-IR experiments unmasked Co3O4 as the dominating compound on the surface of the X20CoCrWMo10-9//Co3O4 composite. Upon a comprehensive dual beam FIB-SEM (focused ion beam-scanning electron microscopy) study we could show that the new composite does not exhibit a classical substrate-layer structure due to the intrinsic formation of the Co-enriched outer zone. This structural particularity is basically responsible for the outstanding electrocatalytic OER performance.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
Ultrafast transient generation of spin-densitywave order in the normal state of BaFe2As2 driven by coherent lattice vibrations
Authors:
K. W. Kim,
A. Pashkin,
H. Schäfer,
M. Beyer,
M. Porer,
T. Wolf,
C. Bernhard,
J. Demsar,
R. Huber,
A. Leitenstorfer
Abstract:
The interplay among charge, spin and lattice degrees of freedom in solids gives rise to intriguing macroscopic quantum phenomena such as colossal magnetoresistance, multiferroicity and high-temperature superconductivity. Strong coupling or competition between various orders in these systems presents the key to manipulate their functional properties by means of external perturbations such as electr…
▽ More
The interplay among charge, spin and lattice degrees of freedom in solids gives rise to intriguing macroscopic quantum phenomena such as colossal magnetoresistance, multiferroicity and high-temperature superconductivity. Strong coupling or competition between various orders in these systems presents the key to manipulate their functional properties by means of external perturbations such as electric and magnetic fields or pressure. Ultrashort and intense optical pulses have emerged as an interesting tool to investigate elementary dynamics and control material properties by melting an existing order. Here, we employ few-cycle multi-terahertz pulses to resonantly probe the evolution of the spin-density-wave (SDW) gap of the pnictide compound BaFe2As2 following excitation with a femtosecond optical pulse. When starting in the low-temperature ground state, optical excitation results in a melting of the SDW order, followed by ultrafast recovery. In contrast, the SDW gap is induced when we excite the normal state above the transition temperature. Very surprisingly, the transient ordering quasi-adiabatically follows a coherent lattice oscillation at a frequency as high as 5.5 THz. Our results attest to a pronounced spin-phonon coupling in pnictides that supports rapid development of a macroscopic order on small vibrational displacement even without breaking the symmetry of the crystal.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
Photoinduced melting of superconductivity in the high-Tc superconductor La2-xSrxCuO4 probed by time-resolved optical and THz techniques
Authors:
M. Beyer,
M. Beck,
D. Städter,
H. Schäfer,
V. V. Kabanov,
G. Logvenov,
I. Bozovic,
G. Koren,
J. Demsar
Abstract:
Dynamics of depletion and recovery of superconducting state in La2-xSrxCuO_4 thin films is investigated utilizing optical pump-probe and optical pump - THz probe techniques as a function of temperature and excitation fluence. The absorbed energy density required to suppress superconductivity is found to be about 8 times higher than the thermodynamically determined condensation energy density and n…
▽ More
Dynamics of depletion and recovery of superconducting state in La2-xSrxCuO_4 thin films is investigated utilizing optical pump-probe and optical pump - THz probe techniques as a function of temperature and excitation fluence. The absorbed energy density required to suppress superconductivity is found to be about 8 times higher than the thermodynamically determined condensation energy density and nearly temperature independent between 4 and 25 K. These findings indicate that during the time when superconducting state suppression takes place (~0.7 ps), a large part (nearly 90%) of the energy is transferred to the phonons with energy lower than twice the maximum value of of the SC gap and only 10% is spent on Cooper pair breaking.
△ Less
Submitted 15 February, 2011;
originally announced February 2011.
-
Disentanglement of the electronic and lattice parts of the order parameter in a 1D Charge Density Wave system probed by femtosecond spectroscopy
Authors:
H. Schäfer,
V. V. Kabanov,
M. Beyer,
K. Biljakovic,
J. Demsar
Abstract:
We report on the high resolution studies of the temperature (T) dependence of the q=0 phonon spectrum in the quasi one-dimensional charge density wave (CDW) compound K0.3MoO3 utilizing time-resolved optical spectroscopy. Numerous modes that appear below Tc show pronounced T-dependences of their amplitudes, frequencies and dampings. Utilizing the time-dependent Ginzburg-Landau theory we show that t…
▽ More
We report on the high resolution studies of the temperature (T) dependence of the q=0 phonon spectrum in the quasi one-dimensional charge density wave (CDW) compound K0.3MoO3 utilizing time-resolved optical spectroscopy. Numerous modes that appear below Tc show pronounced T-dependences of their amplitudes, frequencies and dampings. Utilizing the time-dependent Ginzburg-Landau theory we show that these modes result from linear coupling of the electronic part of the order parameter to the 2kF phonons, while the (electronic) CDW amplitude mode is overdamped.
△ Less
Submitted 14 July, 2010;
originally announced July 2010.
-
Dynamics of photoinduced Charge Density Wave-metal phase transition in K0.3MoO3
Authors:
A. Tomeljak,
H. Schäfer,
D. Städter,
M. Beyer,
K. Biljakovic,
J. Demsar
Abstract:
We present first systematic studies of the photoinduced phase transition from the ground charge density wave (CDW) state to the normal metallic (M) state in the prototype quasi-1D CDW system K0.3MoO3. Ultrafast non-thermal CDW melting is achieved at the absorbed energy density that corresponds to the electronic energy difference between the metallic and CDW states. The results imply that on the…
▽ More
We present first systematic studies of the photoinduced phase transition from the ground charge density wave (CDW) state to the normal metallic (M) state in the prototype quasi-1D CDW system K0.3MoO3. Ultrafast non-thermal CDW melting is achieved at the absorbed energy density that corresponds to the electronic energy difference between the metallic and CDW states. The results imply that on the sub-picosecond timescale when melting and subsequent initial recovery of the electronic order takes place the lattice remains unperturbed.
△ Less
Submitted 14 January, 2009;
originally announced January 2009.
-
Experimental study of the coherent A1 phonons in Te with tailored femtosecond pulses
Authors:
O V Misochko,
M V Lebedev,
H Schaefer,
T Dekorsy
Abstract:
We tailor the shape and phase of the pump pulse spectrum in order to study the coherent lattice dynamics in tellurium. Employing the coherent control via splitting the pump pulse into a two-pulse sequence, we show that the oscillations due to A1 coherent phonons can be cancelled but not enhanced as compared to single pulse excitation. We further demonstrate that a decisive factor for the coheren…
▽ More
We tailor the shape and phase of the pump pulse spectrum in order to study the coherent lattice dynamics in tellurium. Employing the coherent control via splitting the pump pulse into a two-pulse sequence, we show that the oscillations due to A1 coherent phonons can be cancelled but not enhanced as compared to single pulse excitation. We further demonstrate that a decisive factor for the coherent phonon generation is the bandwidth of the pulse spectrum and not the steepness of the pulse envelope. We also observe that the coherent amplitude for long pump pulses decreases exponentially independent of the shape of the pulse spectrum. Finally, by varying the pulse chirp, we show that the coherent amplitude is independent of while the oscillation lifetime is dependent on the chirp sign.
△ Less
Submitted 25 April, 2007;
originally announced April 2007.
