-
Multi-walled carbon nanotube films for the measurement of the alcoholic concentration
Authors:
C. Giordano,
G. Filatrella,
Maria Sarno,
A. Di Bartolomeo
Abstract:
We show that a multi-walled carbon nanotube film can be used as the sensing element of a low-cost sensor for the alcoholic concentration in liquid solutions. To this purpose, we investigate the electrical resistance of the film as a function of the isopropanol concentration in a water solution. The analysis reveals a growing resistance with increasing isopropanol concentration and a fast response.…
▽ More
We show that a multi-walled carbon nanotube film can be used as the sensing element of a low-cost sensor for the alcoholic concentration in liquid solutions. To this purpose, we investigate the electrical resistance of the film as a function of the isopropanol concentration in a water solution. The analysis reveals a growing resistance with increasing isopropanol concentration and a fast response. The sensing element is re-usable as the initial resistance value is restored once the solution has evaporated. The electrical resistance increases linearly when the multi-walled carbon nanotube film is exposed to common beverages with increasing alcoholic content. This work paves the way for the development of low-cost, miniaturized MWCNT-based sensors for quality monitoring and control of alcoholic beverages and general liquid solutions.
△ Less
Submitted 3 February, 2019;
originally announced February 2019.
-
Restoring self-limited growth of single-layer graphene on copper foil via backside coating
Authors:
Nicolas Reckinger,
Marcello Casa,
Jeroen E. Scheerder,
Wout Keijers,
Matthieu Paillet,
Jean-Roch Huntzinger,
Emile Haye,
Alexandre Felten,
Joris Van de Vondel,
Maria Sarno,
Luc Henrard,
Jean-Francois Colomer
Abstract:
The growth of single-layer graphene (SLG) by chemical vapor deposition (CVD) on copper surfaces is very popular because of the self-limiting effect that prevents the growth of few-layer graphene (FLG). However, the reproducibility of the CVD growth of homogeneous SLG remains a major challenge, especially if one wants to avoid heavy surface treatments, monocrystalline substrates and expensive equip…
▽ More
The growth of single-layer graphene (SLG) by chemical vapor deposition (CVD) on copper surfaces is very popular because of the self-limiting effect that prevents the growth of few-layer graphene (FLG). However, the reproducibility of the CVD growth of homogeneous SLG remains a major challenge, especially if one wants to avoid heavy surface treatments, monocrystalline substrates and expensive equipment to control the atmosphere inside the growth system. We demonstrate here that backside tungsten coating of copper foil allows the exclusive growth of SLG with full coverage by atmospheric pressure CVD implemented in a vacuum-free outfit. We show that the absence of FLG patches is related to the absence of decomposition of methane on the backside and consequently to the suppression of C diffusion through copper. In the perspective of large-scale production of graphene, this approach constitutes a significant improvement to the traditional CVD growth process since (1) a tight control of the hydrocarbon flow is no longer required to avoid FLG formation and, consequently, (2) the growth duration necessary to reach full coverage can be dramatically shortened.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Field emission properties of as-grown multiwalled carbon nanotube films
Authors:
F. Giubileo,
A. Di Bartolomeo,
M. Sarno,
C. Altavilla,
S. Santandrea,
P. Ciambelli,
A. M. Cucolo
Abstract:
Multiwalled carbon nanotubes have been produced by ethylene catalytic chemical vapor deposition and used to fabricate thick and dense freestanding films ("buckypapers") by membrane filtering. Field emission properties of buckypapers have been locally studied by means of high vacuum atomic force microscopy with a standard metallic cantilever used as anode to collect electrons emitted from the sampl…
▽ More
Multiwalled carbon nanotubes have been produced by ethylene catalytic chemical vapor deposition and used to fabricate thick and dense freestanding films ("buckypapers") by membrane filtering. Field emission properties of buckypapers have been locally studied by means of high vacuum atomic force microscopy with a standard metallic cantilever used as anode to collect electrons emitted from the sample. Buckypapers showed an interesting linear dependence in the Fowler-Nordheim plots demonstrating their suitability as emitters. By precisely tuning the tip-sample distance in the submicron region we found out that the field enhancement factor is not affected by distance variations up to 2um. Finally, the study of current stability showed that the field emission current with intensity of about 3,3*10-5A remains remarkably stable (within 5% fluctuations) for several hours.
△ Less
Submitted 9 February, 2011;
originally announced February 2011.
-
Superconducting properties of Nb thin films deposited on porous silicon templates
Authors:
M. Trezza,
S. L. Prischepa,
C. Cirillo,
R. Fittipaldi,
M. Sarno,
D. Sannino,
P. Ciambelli,
M. B. S. Hesselberth,
S. K. Lazarouk,
A. V. Dolbik,
V. E. Borisenko,
C. Attanasio
Abstract:
Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made of holes of 5 or 10 nm diameter and of 10 to 40 nm spacing, which provide an artificial pinning structure. The superconducting properties were investigated by…
▽ More
Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made of holes of 5 or 10 nm diameter and of 10 to 40 nm spacing, which provide an artificial pinning structure. The superconducting properties were investigated by transport measurements performed in the presence of magnetic field for different film thickness and substrates with different interpore spacing. Perpendicular upper critical fields measurements present peculiar features such as a change in the H_c2(T) curvature and oscillations in the field dependence of the superconducting resistive transition width at H=1 Tesla. This field value is much higher than typical matching fields in perforated superconductors, as a consequence of the small interpore distance.
△ Less
Submitted 8 October, 2008;
originally announced October 2008.
