-
Detuning-symmetric laser cooling of many mechanical modes with a photothermally modified cavity
Authors:
Thomas J. Clark,
Jiaxing Ma,
Jack C. Sankey
Abstract:
We simultaneously cool $\gtrsim$100 mechanical modes of a membrane with a photothermally modified optical cavity driven by a single blue-detuned laser. In contrast to radiation pressure and bolometric forces applied directly to the mechanical system, this cooling effect does not depend on the sign of detuning, allowing for single-laser stabilization (i.e., simultaneous positive optical spring and…
▽ More
We simultaneously cool $\gtrsim$100 mechanical modes of a membrane with a photothermally modified optical cavity driven by a single blue-detuned laser. In contrast to radiation pressure and bolometric forces applied directly to the mechanical system, this cooling effect does not depend on the sign of detuning, allowing for single-laser stabilization (i.e., simultaneous positive optical spring and damping) that is especially effective at room temperature and high laser power. We also provide intuition about the competing thermal processes, and propose two simple modifications to the mirror coatings that can strongly enhance this effect.
△ Less
Submitted 13 May, 2025; v1 submitted 11 March, 2025;
originally announced March 2025.
-
An optically defined phononic crystal defect
Authors:
Thomas J. Clark,
Simon Bernard,
Jiaxing Ma,
Vincent Dumont,
Jack C. Sankey
Abstract:
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanica…
▽ More
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanical frequency shift commensurate with a 37-fold reduction in the mode's participating mass. Our results lay groundwork for a new class of optomechanical systems that control mechanical mode profile and participating mass.
△ Less
Submitted 28 June, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
HeLIOS: The Superfluid Helium Ultralight Dark Matter Detector
Authors:
M. Hirschel,
V. Vadakkumbatt,
N. P. Baker,
F. M. Schweizer,
J. C. Sankey,
S. Singh,
J. P. Davis
Abstract:
The absence of a breakthrough in directly observing dark matter (DM) through prominent large-scale detectors motivates the development of novel tabletop experiments probing more exotic regions of the parameter space. If DM contains ultralight bosonic particles, they would behave as a classical wave and could manifest through an oscillating force on baryonic matter that is coherent over…
▽ More
The absence of a breakthrough in directly observing dark matter (DM) through prominent large-scale detectors motivates the development of novel tabletop experiments probing more exotic regions of the parameter space. If DM contains ultralight bosonic particles, they would behave as a classical wave and could manifest through an oscillating force on baryonic matter that is coherent over $\sim 10^6$ periods. Our Helium ultraLIght dark matter Optomechanical Sensor (HeLIOS) uses the high-$Q$ acoustic modes of superfluid helium-4 to resonantly amplify this signal. A superconducting re-entrant microwave cavity enables sensitive optomechanical readout ultimately limited by thermal motion at millikelvin temperatures. Pressurizing the helium allows for the unique possibility of tuning the mechanical frequency to effectively broaden the DM detection bandwidth. We demonstrate the working principle of our prototype HeLIOS detector and show that future generations of HeLIOS could explore unconstrained parameter space for both scalar and vector ultralight DM after just an hour of integration time.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Single-spin spectroscopy of spontaneous and phase-locked spin torque oscillator dynamics
Authors:
Adrian Solyom,
Michael Caouette-Mansour,
Brandon Ruffolo,
Patrick Braganca,
Lilian Childress,
Jack Sankey
Abstract:
We employ N-$V$ magnetometry to measure the stray field dynamics of a ferromagnetic permalloy nanowire driven by spin-orbit torques. Specifically, we observe the optically detected magnetic resonance (ODMR) signatures of both spontaneous DC-driven magnetic oscillations and phase-locking to a second harmonic drive, developing a simple macrospin model that captures the salient features. We also obse…
▽ More
We employ N-$V$ magnetometry to measure the stray field dynamics of a ferromagnetic permalloy nanowire driven by spin-orbit torques. Specifically, we observe the optically detected magnetic resonance (ODMR) signatures of both spontaneous DC-driven magnetic oscillations and phase-locking to a second harmonic drive, developing a simple macrospin model that captures the salient features. We also observe signatures of dynamics beyond the macrospin model, including an additional ODMR feature (associated with a second SW mode) and one mode sapping power from another. Our results provide additional insight into N-$V$-spin wave coupling mechanisms, and represent a new modality for sub-wavelength N-$V$ scanned probe microscopy of nanoscale magnetic oscillators.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Robust spin relaxometry with fast adaptive Bayesian estimation
Authors:
Michael Caouette-Mansour,
Adrian Solyom,
Brandon Ruffolo,
Robert D. McMichael,
Jack Sankey,
Lilian Childress
Abstract:
Spin relaxometry with nitrogen-vacancy (NV) centers in diamond offers a spectrally selective, atomically localized, and calibrated measurement of microwave-frequency magnetic noise, presenting a versatile probe for condensed matter and biological systems. Typically, relaxation rates are estimated with curve-fitting techniques that do not provide optimal sensitivity, often leading to long acquisiti…
▽ More
Spin relaxometry with nitrogen-vacancy (NV) centers in diamond offers a spectrally selective, atomically localized, and calibrated measurement of microwave-frequency magnetic noise, presenting a versatile probe for condensed matter and biological systems. Typically, relaxation rates are estimated with curve-fitting techniques that do not provide optimal sensitivity, often leading to long acquisition times that are particularly detrimental in systems prone to drift or other dynamics of interest. Here we show that adaptive Bayesian estimation is well suited to this problem, producing dynamic relaxometry pulse sequences that rapidly find an optimal operating regime. In many situations (including the system we employ), this approach can speed the acquisition by an order of magnitude. We also present a four-signal measurement protocol that is robust to drifts in spin readout contrast, polarization, and microwave pulse fidelity while still achieving near-optimal sensitivity. The combined technique offers a practical, hardware-agnostic approach for a wide range of NV relaxometry applications.
△ Less
Submitted 17 April, 2023; v1 submitted 24 February, 2022;
originally announced February 2022.
-
Monitored wet-etch removal of individual dielectric layers from high-finesse Bragg mirrors
Authors:
Simon Bernard,
Thomas J. Clark,
Vincent Dumont,
Jiaxing Ma,
Jack C. Sankey
Abstract:
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this cas…
▽ More
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this case from a high-reflectivity fiber mirror. By immersing in acid and monitoring off-band reflected light, we show it is straightforward to iteratively (or continuously) remove six bilayers. At each stage, we characterize the coating performance with a Fabry-Pérot cavity, observing the expected stepwise decrease in finesse from 92,000$\pm$3,000 to 3,950$\pm$50, finding no evidence of added optical losses. The etch also removes the fiber's sidewall coating after a single bilayer, and, after six bilayers, confines the remaining coating to a $\sim$50-$μ$m-diameter pedestal at the center of the fiber tip. Vapor etching above the solution produces a tapered "pool cue" cladding profile, reducing the fiber diameter (nominally 125 $μ$m) to $\sim$100 $μ$m at an angle of $\sim$0.3$^\circ$ near the tip. Finally, we note that the data generated by this technique provides a sensitive estimate of the layers' optical depths. This technique could be readily adapted to free-space optics and other coatings.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Analysis of membrane phononic crystals with wide bandgaps and low-mass defects
Authors:
Chris Reetz,
Ran Fischer,
Gabriel G. T. Assumpcao,
Dylan P. McNally,
Peter S. Burns,
Jack C. Sankey,
Cindy A. Regal
Abstract:
We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated…
▽ More
We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated robust acoustic isolation, and a reduction of soft clamping of the defect mode. We fabricate a set of phononic crystals with a variety of defect geometries out of high stress stoichiometric silicon nitride membranes, and measured at both room temperature and 4 K in order to characterize the dissipative pathways across a variety of geometries. Analysis of these devices highlights a number of design principles integral to the implementation of low-mass, low-dissipation mechanical modes into optomechanical systems.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Flexure-Tuned Membrane-at-the-Edge Optomechanical System
Authors:
Vincent Dumont,
Simon Bernard,
Christoph Reinhardt,
Alex Kato,
Maximilian Ruf,
Jack C. Sankey
Abstract:
We introduce a passively-aligned, flexure-tuned cavity optomechanical system in which a membrane is positioned microns from one end mirror of a Fabry-Perot optical cavity. By displacing the membrane through gentle flexure of its silicon supporting frame (i.e., to ~80 m radius of curvature (ROC)), we gain access to the full range of available optomechanical couplings, finding also that the optical…
▽ More
We introduce a passively-aligned, flexure-tuned cavity optomechanical system in which a membrane is positioned microns from one end mirror of a Fabry-Perot optical cavity. By displacing the membrane through gentle flexure of its silicon supporting frame (i.e., to ~80 m radius of curvature (ROC)), we gain access to the full range of available optomechanical couplings, finding also that the optical spectrum exhibits none of the abrupt discontinuities normally found in "membrane-in-the-middle" (MIM) systems. More aggressive flexure (3 m ROC) enables >15 microns membrane travel, milliradian tilt tuning, and a wavelength-scale (1.64 $\pm$ 0.78 microns) membrane-mirror separation. We also provide a complete set of analytical expressions for this system's leading-order dispersive and dissipative optomechanical couplings. Notably, this system can potentially generate orders of magnitude larger linear dissipative or quadratic dispersive strong coupling parameters than is possible with a MIM system. Additionally, it can generate the same purely quadratic dispersive coupling as a MIM system, but with significantly suppressed linear dissipative back-action (and force noise).
△ Less
Submitted 28 August, 2019; v1 submitted 11 May, 2019;
originally announced May 2019.
-
Probing a spin transfer controlled magnetic nanowire with a single nitrogen-vacancy spin in bulk diamond
Authors:
Adrian Solyom,
Zackary Flansberry,
Märta A. Tschudin,
Nathaniel Leitao,
Michel Pioro-Ladrière,
Jack C. Sankey,
Lilian I. Childress
Abstract:
The point-like nature and exquisite magnetic field sensitivity of the nitrogen vacancy (NV) center in diamond can provide information about the inner workings of magnetic nanocircuits in complement with traditional transport techniques. Here we use a single NV in bulk diamond to probe the stray field of a ferromagnetic nanowire controlled by spin transfer (ST) torques. We first report an unambiguo…
▽ More
The point-like nature and exquisite magnetic field sensitivity of the nitrogen vacancy (NV) center in diamond can provide information about the inner workings of magnetic nanocircuits in complement with traditional transport techniques. Here we use a single NV in bulk diamond to probe the stray field of a ferromagnetic nanowire controlled by spin transfer (ST) torques. We first report an unambiguous measurement of ST tuned, parametrically driven, large-amplitude magnetic oscillations. At the same time, we demonstrate that such magnetic oscillations alone can directly drive NV spin transitions, providing a potential new means of control. Finally, we use the NV as a local noise thermometer, observing strong ST damping of the stray field noise, consistent with magnetic cooling from room temperature to $\sim$150 K.
△ Less
Submitted 12 July, 2018; v1 submitted 9 July, 2018;
originally announced July 2018.
-
Etch-Tuning and Design of Silicon Nitride Photonic Crystal Reflectors
Authors:
Simon Bernard,
Christoph Reinhardt,
Vincent Dumont,
Yves-Alain Peter,
Jack C. Sankey
Abstract:
By patterning a freestanding dielectric membrane into a photonic crystal reflector (PCR), it is possible to resonantly enhance its normal-incidence reflectivity, thereby realizing a thin, single-material mirror. In many PCR applications, the operating wavelength (e.g. that of a low-noise laser or emitter) is not tunable, imposing tolerances on crystal geometry that are not reliably achieved with s…
▽ More
By patterning a freestanding dielectric membrane into a photonic crystal reflector (PCR), it is possible to resonantly enhance its normal-incidence reflectivity, thereby realizing a thin, single-material mirror. In many PCR applications, the operating wavelength (e.g. that of a low-noise laser or emitter) is not tunable, imposing tolerances on crystal geometry that are not reliably achieved with standard nanolithography. Here we present a gentle technique to finely tune the resonant wavelength of a SiN PCR using iterative hydrofluoric acid etches. With little optimization, we achieve a 57-nm-thin photonic crystal having an operating wavelength within 0.15 nm (0.04 resonance linewidths) of our target (1550 nm). Our thin structure exhibits a broader and less pronounced transmission dip than is predicted by plane wave simulations, and we identify two effects leading to these discrepancies, both related to the divergence angle of a collimated laser beam. To overcome this limitation in future devices, we distill a series of simulations into a set of general design considerations for realizing robust, high-reflectivity resonances.
△ Less
Submitted 8 September, 2016; v1 submitted 3 September, 2016;
originally announced September 2016.
-
Quantum backaction and noise interference in asymmetric two-cavity optomechanical systems
Authors:
Yariv Yanay,
Jack C. Sankey,
Aashish A. Clerk
Abstract:
We study the effect of cavity damping asymmetries on backaction in a "membrane-in-the-middle" optomechanical system, where a mechanical mode modulates the coupling between two photonic modes. We show that in the adiabatic limit, this system generically realizes a dissipative optomechanical coupling, with an effective position-dependent photonic damping rate. The resulting quantum noise interferenc…
▽ More
We study the effect of cavity damping asymmetries on backaction in a "membrane-in-the-middle" optomechanical system, where a mechanical mode modulates the coupling between two photonic modes. We show that in the adiabatic limit, this system generically realizes a dissipative optomechanical coupling, with an effective position-dependent photonic damping rate. The resulting quantum noise interference can be used to ground-state cool a mechanical resonator in the unresolved sideband regime. We explicitly demonstrate how quantum noise interference controls linear backaction effects, and show that this interference persists even outside the adiabatic limit. For a one-port cavity in the extreme bad-cavity limit, the interference allows one to cancel all linear backaction effects. This allows continuous measurements of position-squared, with no stringent constraints on the single-photon optomechanical coupling strength. In contrast, such a complete cancellation is not possible in the good cavity limit. This places strict bounds on the optomechanical coupling required for quantum non-demolition measurements of mechanical energy, even in a one-port device.
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
Ultralow-Noise SiN Trampoline Resonators for Sensing and Optomechanics
Authors:
Christoph Reinhardt,
Tina Müller,
Alexandre Bourassa,
Jack C. Sankey
Abstract:
In force sensing, optomechanics, and quantum motion experiments, it is typically advantageous to create lightweight, compliant mechanical elements with the lowest possible force noise. Here we report wafer-scale batch fabrication and characterization of high-aspect-ratio, nanogram-scale Si$_3$N$_4$ "trampolines" having quality factors above $4 \times 10^7$ and ringdown times exceeding five minutes…
▽ More
In force sensing, optomechanics, and quantum motion experiments, it is typically advantageous to create lightweight, compliant mechanical elements with the lowest possible force noise. Here we report wafer-scale batch fabrication and characterization of high-aspect-ratio, nanogram-scale Si$_3$N$_4$ "trampolines" having quality factors above $4 \times 10^7$ and ringdown times exceeding five minutes (1 mHz linewidth). We measure a thermally limited force noise sensitivity of 16.2$\pm$0.8 aN/Hz$^{1/2}$ at room temperature, with a spring constant ($\sim$1 N/m) 2-5 orders of magnitude larger than those of competing technologies. We also characterize the suitability of these devices for high-finesse cavity readout and optomechanics applications, finding no evidence of surface or bulk optical losses from the processed nitride in a cavity achieving finesse 40,000. These parameters provide access to a single-photon cooperativity $C_0 \sim 8$ in the resolved-sideband limit, wherein a variety of outstanding optomechanics goals become feasible.
△ Less
Submitted 19 May, 2017; v1 submitted 5 November, 2015;
originally announced November 2015.
-
Enhanced Optomechanical Levitation of Minimally Supported Dielectrics
Authors:
Tina Müller,
Christoph Reinhardt,
Jack C. Sankey
Abstract:
Optically levitated mechanical sensors promise isolation from thermal noise far beyond what is possible using flexible materials alone. One way to access this potential is to apply a strong optical trap to a minimally supported mechanical element, thereby increasing its quality factor $Q_m$. Current schemes, however, require prohibitively high laser power ($\sim10$ W), and the $Q_m$ enhancement is…
▽ More
Optically levitated mechanical sensors promise isolation from thermal noise far beyond what is possible using flexible materials alone. One way to access this potential is to apply a strong optical trap to a minimally supported mechanical element, thereby increasing its quality factor $Q_m$. Current schemes, however, require prohibitively high laser power ($\sim10$ W), and the $Q_m$ enhancement is ultimately limited to a factor of $\sim$ 50 by hybridization between the trapped mode and the dissipative modes of the supporting structure. Here we propose a levitation scheme taking full advantage of an optical resonator to reduce the circulating power requirements by many orders of magnitude. Applying this scheme to the case of a dielectric disk in a Fabry-Perot cavity, we find a tilt-based tuning mechanism for optimizing both center-of-mass and torsional mode traps. Notably, the two modes are trapped with comparable efficiency, and we estimate that a 10-micron-diameter, 100-nm-thick Si disc could be trapped to a frequency of $\sim$ 10 MHz with only $30$ mW circulating in a cavity of (modest) finesse 1500. Finally, we simulate the effect such a strong trap would have on a realistic doubly-tethered disc. Of central importance, we find torsional motion is comparatively immune to $Q_m$-limiting hybridization, allowing a $Q_m$ enhancement factor of $\sim$ 1500. This opens the possibility of realizing a laser-tuned 10 MHz mechanical system with a quality factor of order a billion.
△ Less
Submitted 30 April, 2015; v1 submitted 24 December, 2014;
originally announced December 2014.
-
Cryogenic Optomechanics with a Si3N4 Membrane and Classical Laser Noise
Authors:
A. M. Jayich,
J. C. Sankey,
K. Borkje,
D. Lee,
C. Yang,
M. Underwood,
L. Childress,
A. Petrenko,
S. M. Girvin,
J. G. E. Harris
Abstract:
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband l…
▽ More
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband limit. We monitor the membrane's thermal motion using a heterodyne optical circuit capable of simultaneously measuring both of the mechanical sidebands, and find that the observed optical spring and damping quantitatively agree with theory. The mechanical sidebands exhibit a Fano lineshape, and to explain this we develop a theory describing heterodyne measurements in the presence of correlated classical laser noise. Finally, we discuss the use of a passive filter cavity to remove classical laser noise, and consider the future requirements for laser cooling this relatively large and low-frequency mechanical element to very near its quantum mechanical ground state.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Resonant Spin-Transfer-Driven Switching of Magnetic Devices Assisted by Microwave Current Pulses
Authors:
Y. -T. Cui,
J. C. Sankey,
C. Wang,
K. V. Thadani,
Z. -P. Li,
R. A. Buhrman,
D. C. Ralph
Abstract:
The torque generated by the transfer of spin angular momentum from a spin-polarized current to a nanoscale ferromagnet can switch the orientation of the nanomagnet much more efficiently than a current-generated magnetic field, and is therefore in development for use in next-generation magnetic random access memory (MRAM). Up to now, only DC currents and square-wave current pulses have been inves…
▽ More
The torque generated by the transfer of spin angular momentum from a spin-polarized current to a nanoscale ferromagnet can switch the orientation of the nanomagnet much more efficiently than a current-generated magnetic field, and is therefore in development for use in next-generation magnetic random access memory (MRAM). Up to now, only DC currents and square-wave current pulses have been investigated in spin-torque switching experiments. Here we present measurements showing that spin transfer from a microwave-frequency pulse can produce a resonant excitation of a nanomagnet and lead to improved switching characteristics in combination with a square current pulse. With the assistance of a microwave-frequency pulse, the switching time is reduced and achieves a narrower distribution than when driven by a square current pulse alone, and this can permit significant reductions in the integrated power required for switching. Resonantly excited switching may also enable alternative, more compact MRAM circuit architectures.
△ Less
Submitted 19 March, 2008;
originally announced March 2008.
-
Strong linewidth variation for spin-torque nano-oscillators as a function of in-plane magnetic field angle
Authors:
K. V. Thadani,
G. Finocchio,
Z. -P. Li,
O. Ozatay,
J. C. Sankey,
I. N. Krivorotov,
Y. -T. Cui,
R. A. Buhrman,
D. C. Ralph
Abstract:
We measure the microwave signals produced by spin-torque-driven magnetization dynamics in patterned magnetic multilayer devices at room temperature, as a function of the angle of a magnetic field applied in the sample plane. We find strong variations in the frequency linewidth of the signals, with a decrease by more than a factor of 20 as the field is rotated from the magnetic easy axis to the i…
▽ More
We measure the microwave signals produced by spin-torque-driven magnetization dynamics in patterned magnetic multilayer devices at room temperature, as a function of the angle of a magnetic field applied in the sample plane. We find strong variations in the frequency linewidth of the signals, with a decrease by more than a factor of 20 as the field is rotated from the magnetic easy axis to the in-plane hard axis. Based on micromagnetic simulations, we identify these variations as due to a transition from spatially incoherent to coherent precession.
△ Less
Submitted 19 March, 2008;
originally announced March 2008.
-
Measurement of the Spin-Transfer-Torque Vector in Magnetic Tunnel Junctions
Authors:
J. C. Sankey,
Y. -T. Cui,
R. A. Buhrman,
D. C. Ralph,
J. Z. Sun,
J. C. Slonczewski
Abstract:
Spin-polarized currents can transfer spin angular momentum to a ferromagnet, generating a torque that can efficiently reorient its magnetization. Achieving quantitative measurements of the spin-transfer-torque vector in magnetic tunnel junctions (MTJs) is important for understanding fundamental mechanisms affecting spin-dependent tunneling, and for developing magnetic memories and nanoscale micr…
▽ More
Spin-polarized currents can transfer spin angular momentum to a ferromagnet, generating a torque that can efficiently reorient its magnetization. Achieving quantitative measurements of the spin-transfer-torque vector in magnetic tunnel junctions (MTJs) is important for understanding fundamental mechanisms affecting spin-dependent tunneling, and for developing magnetic memories and nanoscale microwave oscillators. Here we present direct measurements of both the magnitude and direction of the spin torque in Co60Fe20B20/MgO/Co60Fe20B20 MTJs. At low bias V, the differential torque vector d{tau}/dV lies in the plane defined by the electrode magnetizations, and its magnitude is in excellent agreement with a prediction for highly-spin-polarized tunneling. With increasing bias, the in-plane component d{tau}_{parallel}/dV remains large, in striking contrast to the decreasing magnetoresistance ratio. The differential torque vector also rotates out of the plane under bias; we measure a perpendicular component tau_{perp}(V) with bias dependence proportional to V^2 for low V, that becomes as large as 30% of the in-plane torque.
△ Less
Submitted 29 May, 2007;
originally announced May 2007.
-
Spin-Torque Ferromagnetic Resonance Measurements of Damping in Nanomagnets
Authors:
G. D. Fuchs,
J. C. Sankey,
V. S. Pribiag,
L. Qian,
P. M. Braganca,
A. G. F. Garcia,
E. M. Ryan,
Zhi-Pan Li,
O. Ozatay,
D. C. Ralph,
R. A. Buhrman
Abstract:
We measure the magnetic damping parameter a in thin film CoFeB and permalloy (Py) nanomagnets at room temperature using ferromagnetic resonance driven by microwave frequency spin-transfer torque. We obtain $α_{CoFeB} = 0.014 \pm 0.003$ and $α_{Py}=0.010 \pm 0.002$, values comparable to measurements for extended thin films, but significantly less than the effective damping determined previously f…
▽ More
We measure the magnetic damping parameter a in thin film CoFeB and permalloy (Py) nanomagnets at room temperature using ferromagnetic resonance driven by microwave frequency spin-transfer torque. We obtain $α_{CoFeB} = 0.014 \pm 0.003$ and $α_{Py}=0.010 \pm 0.002$, values comparable to measurements for extended thin films, but significantly less than the effective damping determined previously for similar nanomagnets by fits to time-domain studies of large-angle magnetic excitations and magnetic reversal. The greater damping found for the large amplitude nanomagnet dynamics is attributed to the nonlinear excitation of non-uniform magnetic modes.
△ Less
Submitted 22 March, 2007;
originally announced March 2007.
-
Large-amplitude coherent spin waves exited by spin-polarized current in nanoscale spin valves
Authors:
I. N. Krivorotov,
D. V. Berkov,
N. L. Gorn,
N. C. Emley,
J. C. Sankey,
D. C. Ralph,
R. A. Buhrman
Abstract:
We present spectral measurements of spin-wave excitations driven by direct spinpolarized current in the free layer of nanoscale Ir20Mn80/Ni80Fe20/Cu/Ni80Fe20 spin valves. The measurements reveal that large-amplitude coherent spin wave modes are excited over a wide range of bias current. The frequency of these excitations exhibits a series of jumps as a function of current due to transitions betw…
▽ More
We present spectral measurements of spin-wave excitations driven by direct spinpolarized current in the free layer of nanoscale Ir20Mn80/Ni80Fe20/Cu/Ni80Fe20 spin valves. The measurements reveal that large-amplitude coherent spin wave modes are excited over a wide range of bias current. The frequency of these excitations exhibits a series of jumps as a function of current due to transitions between different localized nonlinear spin wave modes of the Ni80Fe20 nanomagnet. We find that micromagnetic simulations employing the Landau-Lifshitz-Gilbert equation of motion augmented by the Slonczewski spin torque term (LLGS) accurately describe the frequency of the current-driven excitations including the mode transition behavior. However LLGS simulations give qualitatively incorrect predictions for the amplitude of excited spin waves as a function of current.
△ Less
Submitted 22 March, 2007; v1 submitted 17 March, 2007;
originally announced March 2007.
-
Magnetic vortex oscillator driven by dc spin-polarized current
Authors:
V. S. Pribiag,
I. N. Krivorotov,
G. D. Fuchs,
P. M. Braganca,
O. Ozatay,
J. C. Sankey,
D. C. Ralph,
R. A. Buhrman
Abstract:
Transfer of angular momentum from a spin-polarized current to a ferromagnet provides an efficient means to control the dynamics of nanomagnets. A peculiar consequence of this spin-torque, the ability to induce persistent oscillations of a nanomagnet by applying a dc current, has previously been reported only for spatially uniform nanomagnets. Here we demonstrate that a quintessentially nonunifor…
▽ More
Transfer of angular momentum from a spin-polarized current to a ferromagnet provides an efficient means to control the dynamics of nanomagnets. A peculiar consequence of this spin-torque, the ability to induce persistent oscillations of a nanomagnet by applying a dc current, has previously been reported only for spatially uniform nanomagnets. Here we demonstrate that a quintessentially nonuniform magnetic structure, a magnetic vortex, isolated within a nanoscale spin valve structure, can be excited into persistent microwave-frequency oscillations by a spin-polarized dc current. Comparison to micromagnetic simulations leads to identification of the oscillations with a precession of the vortex core. The oscillations, which can be obtained in essentially zero magnetic field, exhibit linewidths that can be narrower than 300 kHz, making these highly compact spin-torque vortex oscillator devices potential candidates for microwave signal-processing applications, and a powerful new tool for fundamental studies of vortex dynamics in magnetic nanostructures.
△ Less
Submitted 9 February, 2007;
originally announced February 2007.
-
Spin-transfer-driven ferromagnetic resonance of individual nanomagnets
Authors:
J. C. Sankey,
P. M. Braganca,
A. G. F. Garcia,
I. N. Krivorotov,
R. A. Buhrman,
D. C. Ralph
Abstract:
We demonstrate a technique that enables ferromagnetic resonance (FMR) measurements of the normal modes for magnetic excitations in individual nanoscale ferromagnets, smaller in volume by a factor of 1000 than can be probed by other methods. The measured peak shapes indicate two regimes of response: simple FMR and phase locking. Studies of the resonance frequencies, amplitudes, and linewidths as…
▽ More
We demonstrate a technique that enables ferromagnetic resonance (FMR) measurements of the normal modes for magnetic excitations in individual nanoscale ferromagnets, smaller in volume by a factor of 1000 than can be probed by other methods. The measured peak shapes indicate two regimes of response: simple FMR and phase locking. Studies of the resonance frequencies, amplitudes, and linewidths as a function of microwave power, DC current, and magnetic field provide detailed new information about the exchange, damping, and spin-transfer torques that govern the dynamics in magnetic nanostructures.
△ Less
Submitted 4 February, 2006;
originally announced February 2006.
-
Time-Resolved Spin Torque Switching and Enhanced Damping in Py/Cu/Py Spin-Valve Nanopillars
Authors:
N. C. Emley,
I. N. Krivorotov,
A. G. F. Garcia,
O. Ozatay,
J. C. Sankey,
D. C. Ralph,
R. A. Buhrman
Abstract:
We report time-resolved measurements of current-induced reversal of a free magnetic layer in Py/Cu/Py elliptical nanopillars at temperatures T = 4.2 K to 160 K. Comparison of the data to Landau-Lifshitz-Gilbert macrospin simulations of the free layer switching yields numerical values for the spin torque and the Gilbert damping parameters as functions of T. The damping is strongly T-dependent, wh…
▽ More
We report time-resolved measurements of current-induced reversal of a free magnetic layer in Py/Cu/Py elliptical nanopillars at temperatures T = 4.2 K to 160 K. Comparison of the data to Landau-Lifshitz-Gilbert macrospin simulations of the free layer switching yields numerical values for the spin torque and the Gilbert damping parameters as functions of T. The damping is strongly T-dependent, which we attribute to the antiferromagnetic pinning behavior of a thin permalloy oxide layer around the perimeter of the free layer. This adventitious antiferromagnetic pinning layer can have a major impact on spin torque phenomena.
△ Less
Submitted 1 November, 2005; v1 submitted 31 October, 2005;
originally announced October 2005.
-
Mechanisms limiting the coherence time of spontaneous magnetic oscillations driven by DC spin-polarized currents
Authors:
J. C. Sankey,
I. N. Krivorotov,
S. I. Kiselev,
P. M. Braganca,
N. C. Emley,
R. A. Buhrman,
D. C. Ralph
Abstract:
The spin-transfer torque from a DC spin-polarized current can generate highly-coherent magnetic precession in nanoscale magnetic-multilayer devices. By measuring linewidths of spectra from the resulting resistance oscillations, we argue that the coherence time can be limited at low temperature by thermal deflections about the equilibrium magnetic trajectory, and at high temperature by thermally-…
▽ More
The spin-transfer torque from a DC spin-polarized current can generate highly-coherent magnetic precession in nanoscale magnetic-multilayer devices. By measuring linewidths of spectra from the resulting resistance oscillations, we argue that the coherence time can be limited at low temperature by thermal deflections about the equilibrium magnetic trajectory, and at high temperature by thermally-activated transitions between dynamical modes. Surprisingly, the coherence time can be longer than predicted by simple macrospin simulations.
△ Less
Submitted 14 February, 2006; v1 submitted 30 May, 2005;
originally announced May 2005.
-
Spin-Transfer Excitations of Permalloy Nanopillars for Large Applied Currents
Authors:
S. I. Kiselev,
J. C. Sankey,
I. N. Krivorotov,
N. C. Emley,
A. G. F. Garcia,
R. A. Buhrman,
D. C. Ralph
Abstract:
Using measurements of the spectra of microwave-frequency resistance oscillations, we determine the phase diagram of magnetic excitations caused by torques from DC spin-polarized currents in (thin permalloy)/copper/(thick permalloy) multilayer samples. We extend the measurements to larger values of current than have been reported previously. We find several additional modes that we are able to id…
▽ More
Using measurements of the spectra of microwave-frequency resistance oscillations, we determine the phase diagram of magnetic excitations caused by torques from DC spin-polarized currents in (thin permalloy)/copper/(thick permalloy) multilayer samples. We extend the measurements to larger values of current than have been reported previously. We find several additional modes that we are able to identify with motion of the thick magnetic layer as well as the thin one. Peaks in the microwave spectra at multiple frequencies suggest that spatially non-uniform dynamical states can be important in some circumstances. We compare the experimental phase diagram with simple theoretical models and achieve a good qualitative agreement.
△ Less
Submitted 16 April, 2005;
originally announced April 2005.
-
Temperature dependence of spin-transfer-induced switching of nanomagnets
Authors:
I. N. Krivorotov,
N. C. Emley,
A. G. F. Garcia,
J. C. Sankey,
S. I. Kiselev,
D. C. Ralph,
R. A. Buhrman
Abstract:
We measure the temperature, magnetic-field, and current dependence for the switching of nanomagnets by a spin-polarized current. Depending on current bias, switching can occur between either two static magnetic states or a static state and a current-driven precessional mode. In both cases, the switching is thermally activated and governed by the sample temperature, not a higher effective magneti…
▽ More
We measure the temperature, magnetic-field, and current dependence for the switching of nanomagnets by a spin-polarized current. Depending on current bias, switching can occur between either two static magnetic states or a static state and a current-driven precessional mode. In both cases, the switching is thermally activated and governed by the sample temperature, not a higher effective magnetic temperature. The activation barriers for switching between static states depend linearly on current, with a weaker dependence for dynamic to static switching.
△ Less
Submitted 1 April, 2004;
originally announced April 2004.
-
Spin-Transfer Effects in Nanoscale Magnetic Tunnel Junctions
Authors:
G. D. Fuchs,
N. C. Emley,
I. N. Krivorotov,
P. M. Braganca,
E. M. Ryan,
S. I. Kiselev,
J. C. Sankey,
J. A. Katine,
D. C. Ralph,
R. A. Buhrman
Abstract:
We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltag…
▽ More
We report measurements of magnetic switching and steady-state magnetic precession driven by spin-polarized currents in nanoscale magnetic tunnel junctions with low-resistance, < 5 Ohm-micron-squared, barriers. The current densities required for magnetic switching are similar to values for all-metallic spin-valve devices. In the tunnel junctions, spin-transfer-driven switching can occur at voltages that are high enough to quench the tunnel magnetoresistance, demonstrating that the current remains spin-polarized at these voltages.
△ Less
Submitted 2 April, 2004; v1 submitted 31 March, 2004;
originally announced April 2004.
-
Current-Induced Nanomagnet Dynamics for Magnetic Fields Perpendicular to the Sample Plane
Authors:
S. I. Kiselev,
J. C. Sankey,
I. N. Krivorotov,
N. C. Emley,
M. Rinkoski,
C. Perez,
R. A. Buhrman,
D. C. Ralph
Abstract:
We present electrical measurements of high-frequency magnetic dynamics excited by spin-polarized currents in Co/Cu/Ni80Fe20 nanopillar devices, with a magnetic field applied perpendicular to the sample layers. As a function of current and magnetic field, the dynamical phase diagram contains several distinguishable precessional modes and also static magnetic states. Using detailed comparisons wit…
▽ More
We present electrical measurements of high-frequency magnetic dynamics excited by spin-polarized currents in Co/Cu/Ni80Fe20 nanopillar devices, with a magnetic field applied perpendicular to the sample layers. As a function of current and magnetic field, the dynamical phase diagram contains several distinguishable precessional modes and also static magnetic states. Using detailed comparisons with numerical simulations, we provide rigorous tests of the theory of spin-transfer torques.
△ Less
Submitted 3 March, 2004;
originally announced March 2004.
-
Microwave Oscillations of a Nanomagnet Driven by a Spin-Polarized Current
Authors:
S. I. Kiselev,
J. C. Sankey,
I. N. Krivorotov,
N. C. Emley,
R. J. Schoelkopf,
R. A. Buhrman,
D. C. Ralph
Abstract:
We describe direct electrical measurements of microwave-frequency dynamics in individual nanomagnets that are driven by spin transfer from a DC spin-polarized current. We map out the dynamical stability diagram as a function of current and magnetic field, and we show that spin transfer can produce several different types of magnetic excitations, including small-angle precession, a more complicat…
▽ More
We describe direct electrical measurements of microwave-frequency dynamics in individual nanomagnets that are driven by spin transfer from a DC spin-polarized current. We map out the dynamical stability diagram as a function of current and magnetic field, and we show that spin transfer can produce several different types of magnetic excitations, including small-angle precession, a more complicated large-angle motion, and a high-current state that generates little microwave signal. The large-angle mode can produce a significant emission of microwave energy, as large as 40 times the Johnson-noise background.
△ Less
Submitted 10 June, 2003;
originally announced June 2003.
