Showing 1–24 of 24 results for author: Salman, O

Orientation attractors in velocity gradient driven processes for large plastic deformations of crystals

Authors: Jalal Smiri, Oguz Umut Salman, Ioan R. Ionescu

Abstract: We study lattice orientation attractors, also referred to as preferred or ideal orientations, in crystalline materials, and how they can be used to predict the final texture of polycrystals after manufacturing processes. By treating Crystal Plasticity (CP) in an Eulerian framework, rather than traditional Lagrangian approaches, we overcome the significant challenges associated with lattice distort… ▽ More We study lattice orientation attractors, also referred to as preferred or ideal orientations, in crystalline materials, and how they can be used to predict the final texture of polycrystals after manufacturing processes. By treating Crystal Plasticity (CP) in an Eulerian framework, rather than traditional Lagrangian approaches, we overcome the significant challenges associated with lattice distortion, enabling accurate simulations of material behavior under large deformations. This Eulerian perspective allows us to track the evolution of crystallographic orientations directly in the spatial domain, providing crucial insights into texture development. The CP models employed here capture the microstructural evolution in both mono- and polycrystalline materials, with particular emphasis on velocity gradient driven processes. Our linear stability analysis strategy, while applicable to general CP formulations, is demonstrated using a simplified rigid-(visco)-plastic 2-D model with three slip systems. This approach successfully predicts the lattice orientation attractors for very large strains (exceeding 50$\%$) by analyzing how different slip systems interact under applied loads. Three numerical simulations illustrate the theory's effectiveness: polycrystal deformation under homogeneous velocity gradient loading, void evolution in a monocrystal under non-homogeneous loading, and slip band formation during uni-axial traction. High-resolution CP simulations, enhanced through re-meshing techniques, further validate our findings on how initial crystallographic orientations, deformation mechanisms, and loading conditions affect the evolution of orientation attractors and ultimate crystal texture. △ Less

Submitted 18 April, 2025; originally announced April 2025.

Comments: arXiv admin note: text overlap with arXiv:2504.03565

Inertia-induced power-law scaling in martensites

Authors: Oğuz Umut Salman, Alphonse Finel, Lev Truskinovsky

Abstract: Martensites subjected to quasistatic deformation are known to exhibit power law distributed acoustic emission in a broad range of scales, however, the origin of the observed scaling behavior and the mechanism of self-organization towards apparent criticality remains obscure. Here we argue that the power law structure of intermittent fluctuations can be at least partially interpreted as an effect o… ▽ More Martensites subjected to quasistatic deformation are known to exhibit power law distributed acoustic emission in a broad range of scales, however, the origin of the observed scaling behavior and the mechanism of self-organization towards apparent criticality remains obscure. Here we argue that the power law structure of intermittent fluctuations can be at least partially interpreted as an effect of inertia. We build on the insight that inertial dynamics, evidenced by acoustic emission, can become an important factor if the underlying mechanical system is only marginally stable. We first illustrate the possibility of inertia-induced \textit{heavy-tailed} avalanche size distributions using a prototypical example of a discrete chain with bi-stable springs. We then explore the effects of inertia in fully realistic two- and three-dimensional continuum models of elastic phase transitions. In particular, we demonstrate that a three-dimensional model can produce not only qualitative but also quantitative agreement with experiment. △ Less

Submitted 7 July, 2025; v1 submitted 7 April, 2025; originally announced April 2025.

Large plastic deformation of voids in crystals

Authors: Jalal Smiri, Joseph Paux, Oguz Umut Salman, Ioan R. Ionescu

Abstract: The mechanisms of void growth and coalescence are key contributors to the ductile failure of crystalline materials. At the grain scale, single crystal plastic anisotropy induces large strain localization leading to complex shape evolutions. In this study, an Arbitrary Lagrangian-Eulerian (ALE) framework for 2D crystal plasticity combined with dynamic remeshing is used to study the 2D shape evoluti… ▽ More The mechanisms of void growth and coalescence are key contributors to the ductile failure of crystalline materials. At the grain scale, single crystal plastic anisotropy induces large strain localization leading to complex shape evolutions. In this study, an Arbitrary Lagrangian-Eulerian (ALE) framework for 2D crystal plasticity combined with dynamic remeshing is used to study the 2D shape evolution of cylindrical voids in single crystals. The large deformation and shape evolution of the voids under two types of loading are considered: (i) radial and (ii) uni-axial loadings. In both cases, the voids undergo complex shape evolutions induced by the interactions between slip bands, lattice rotations and large strain phenomena. In case (i), the onset of the deformation revealed the formation of a complex fractal network of slip bands around the voids. Then, large deformations unearth an unexpected evolution of the slip bands network associated with significant lattice rotations, leading to a final hexagonal shape for the void. In case (ii), we obtain shear bands with very large accumulated plastic strain (> 200%) compared to the macroscopic engineering strains (< 15%). A high dependence between crystalline orientations, slip band localization and therefore shape evolution was observed, concluding in a high dependency between crystalline orientation and void shape elongation, which is of prime importance regarding coalescence of the voids, thus to the formation of macro-cracks. △ Less

Submitted 4 April, 2025; originally announced April 2025.

Comments: 40 pages, 13 figures

Dislocation-density based crystal plasticity: stability and attractors in slip rate driven processes

Authors: Jalal Smiri, Oguz Umut Salman, Ioan R. Ionescu

Abstract: Dislocation-density based crystal plasticity (CP) models are introduced to account for the microstructral changes throughout the deformation process, enabling more quantitative predictions of the deformation process compared to slip-system resistance-based plasticity models. In this work, we present a stability analysis of slip rate driven processes for some established dislocation density-based m… ▽ More Dislocation-density based crystal plasticity (CP) models are introduced to account for the microstructral changes throughout the deformation process, enabling more quantitative predictions of the deformation process compared to slip-system resistance-based plasticity models. In this work, we present a stability analysis of slip rate driven processes for some established dislocation density-based models, including the Kocks and Mecking (KM) model and its variants. Our analysis can be generalized to any type of dislocation density model, providing a broader framework for understanding the stability of such systems. Interestingly, we demonstrate that even size-independent models can exhibit size-dependent effects through variations in initial dislocation density. Notably, the initial dislocation density significantly influences material hardening or softening responses. To further explore these phenomena, we conduct numerical simulations of micro-pillar compression using an Eulerian crystal plasticity framework. Our results show that dislocation-density-based CP models effectively capture microstructural evolution in small-scale materials, offering critical insights for the design of miniaturized mechanical devices and advanced materials in nanotechnology. △ Less

Submitted 18 April, 2025; v1 submitted 3 April, 2025; originally announced April 2025.

Physical scaling in microstructures and avalanches of dislocation by Dislocation Dynamics simulations

Authors: Missipsa Aissaoui, Charlie Kahloun, Oguz Umut Salman, Sylvain Queyreau

Abstract: At the mesoscale, the avalanche-like plastic bursts are associated with statistical signatures, whose parameters are not always well defined. In this work, we performed large scale and realistic Dislocation Dynamics simulations of the deformation of fcc Cu in bulk systems under fixed strain rate. Our results show that the power law exponent is not impacted by the dislocation density nor the loadin… ▽ More At the mesoscale, the avalanche-like plastic bursts are associated with statistical signatures, whose parameters are not always well defined. In this work, we performed large scale and realistic Dislocation Dynamics simulations of the deformation of fcc Cu in bulk systems under fixed strain rate. Our results show that the power law exponent is not impacted by the dislocation density nor the loading direction. However, dislocation density controls the scaling of the power law truncation in avalanche statistics and triggering stress at the origin of plastic events. The correlation between the activities of slip systems is highlighted. Our quantitative data can provide explanations for some experimental observations and help link the mesoscopic plasticity picture to larger-scale models. △ Less

Submitted 30 December, 2024; originally announced December 2024.

Slip-dominated structural transitions

Authors: Kanka Ghosh, Oguz Umut Salman, Sylvain Queyreau, Lev Truskinovsky

Abstract: We use molecular dynamics to show that plastic slip is a crucial component of the transformation mechanism of a square-to-triangular structural transition. The latter is a stylized analog of many other reconstructive phase transitions. To justify our conclusions we use a novel atomistically-informed mesoscopic representation of the field of lattice distortions in molecular dynamics simulations. Ou… ▽ More We use molecular dynamics to show that plastic slip is a crucial component of the transformation mechanism of a square-to-triangular structural transition. The latter is a stylized analog of many other reconstructive phase transitions. To justify our conclusions we use a novel atomistically-informed mesoscopic representation of the field of lattice distortions in molecular dynamics simulations. Our approach reveals a hidden alternating slip distribution behind the seemingly homogeneous product phase which points to the fact that lattice invariant shears play a central role in this class of phase transformations. While the underlying pattern of anti-parallel displacements may be also interpreted as microscopic shuffling, its precise crystallographic nature strongly suggests the plasticity-centered interpretation. △ Less

Submitted 7 July, 2025; v1 submitted 6 September, 2024; originally announced September 2024.

Journal ref: Phys. Rev. Materials 9, 073604 (2025)

Accounting for localized deformation: a simple computation of true stress in micropillar compression experiments

Authors: Jalal Smiri, Oguz Umut Salman, Matteo Ghidelli, Ioan R. Ionescu

Abstract: Compression experiments are widely used to study the mechanical properties of materials at micro- and nanoscale. However, the conventional engineering stress measurement method used in these experiments neglects to account for the alterations in the material's shape during loading. This can lead to inaccurate stress values and potentially misleading conclusions about the material's mechanical beha… ▽ More Compression experiments are widely used to study the mechanical properties of materials at micro- and nanoscale. However, the conventional engineering stress measurement method used in these experiments neglects to account for the alterations in the material's shape during loading. This can lead to inaccurate stress values and potentially misleading conclusions about the material's mechanical behavior especially in the case of localized deformation. To address this issue, we present a method for calculating true stress in cases of localized plastic deformation commonly encountered in experimental settings: (i) a single band and (ii) two bands oriented in arbitrary directions with respect to the vertical axis of the pillar (either in the same or opposite directions). Our simple analytic formulas can be applied to homogeneous and isotropic materials and crystals, requiring only standard data (displacement-force curve, aspect ratio, shear band angle and elastic strain limit) obtained from experimental results and eliminating the need for finite element computations. Our approach provides a more precise interpretation of experimental results and can serve as a valuable and simple tool in material design and characterization. △ Less

Submitted 29 July, 2024; v1 submitted 10 October, 2023; originally announced October 2023.

Comments: arXiv admin note: text overlap with arXiv:2012.12780

Homogeneous nucleation of dislocations as a pattern formation phenomenon

Authors: R. Baggio, O. U. Salman, L. Truskinovsky

Abstract: Dislocation nucleation in homogeneous crystals initially unfolds as a linear symmetry-breaking elastic instability. In the absence of explicit nucleation centers, such instability develops simultaneously all over the crystal and due to the dominance of long range elastic interactions it advances into the nonlinear stage as a collective phenomenon through pattern formation. In this paper we use a n… ▽ More Dislocation nucleation in homogeneous crystals initially unfolds as a linear symmetry-breaking elastic instability. In the absence of explicit nucleation centers, such instability develops simultaneously all over the crystal and due to the dominance of long range elastic interactions it advances into the nonlinear stage as a collective phenomenon through pattern formation. In this paper we use a novel mesoscopic tensorial model (MTM) of crystal plasticity to study the delicate role of crystallographic symmetry in the development of the dislocation nucleation patterns in defect free crystals loaded in a hard device. The model is formulated in 2D and we systematically compare lattices with square and triangular symmetry. To avoid the prevalence of the conventional plastic mechanisms, we consider the loading paths represented by pure shears applied on the boundary of the otherwise unloaded body. These loading protocols can be qualified as exploiting the 'softest' and the 'hardest' directions and we show that the associated dislocation patterns are strikingly different. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Inelastic rotations and pseudo-turbulent plastic avalanches in crystals

Authors: R. Baggio, O. U. Salman, L. Truskinovsky

Abstract: Plastic deformations in crystals often produce textures in the form of randomly oriented patches of the unstressed lattice. We use a novel mesoscopic Landau-type model of crystal plasticity to show that in such textures large crystallographic lattice rotations can originate from a highly coordinated inelastic slip at the microscale. Our numerical experiments show that dislocation avalanches, which… ▽ More Plastic deformations in crystals often produce textures in the form of randomly oriented patches of the unstressed lattice. We use a novel mesoscopic Landau-type model of crystal plasticity to show that in such textures large crystallographic lattice rotations can originate from a highly coordinated inelastic slip at the microscale. Our numerical experiments show that dislocation avalanches, which lead to the formation of such rotations, involve pseudo-turbulent motions with power-law distributed spatial correlations. △ Less

Submitted 13 January, 2023; v1 submitted 16 March, 2022; originally announced March 2022.

Discontinuous yielding of pristine micro-crystals

Authors: O. U. Salman, R. Baggio, B. Bacroix, G. Zanzotto, N. Gorbushin, L. Truskinovsky

Abstract: We study the mechanical response of a dislocation-free 2D crystal under homogenous shear using a new mesoscopic approach to crystal plasticity, a Landau-type theory, accounting for the global invariance of the energy in the space of strain tensors while operating with an infinite number of equivalent energy wells. The advantage of this approach is that it eliminates arbitrariness in dealing with t… ▽ More We study the mechanical response of a dislocation-free 2D crystal under homogenous shear using a new mesoscopic approach to crystal plasticity, a Landau-type theory, accounting for the global invariance of the energy in the space of strain tensors while operating with an infinite number of equivalent energy wells. The advantage of this approach is that it eliminates arbitrariness in dealing with topological transitions involved, for instance, in nucleation and annihilation of dislocations. We use discontinuous yielding of pristine micro-crystals as a benchmark problem for the new theory and show that the nature of the catastrophic instability, which in this setting inevitably follows the standard affine response, depends not only on lattice symmetry but also on the orientation of the crystal in the loading device. The ensuing dislocation avalanche involves cooperative dislocation nucleation, resulting in the formation of complex microstructures controlled by a nontrivial self-induced coupling between different plastic mechanisms. △ Less

Submitted 22 May, 2021; v1 submitted 27 February, 2021; originally announced March 2021.

Fluctuations in crystalline plasticity

Authors: Jérôme Weiss, Peng Zhang, Oguz Umut Salman, Gang Liu, Lev Truskinovsky

Abstract: Recently acoustic signature of dislocation avalanches in HCP materials was found to be long tailed in size and energy, suggesting critical dynamics. Even more recently, the intermittent plastic response was found to be generic for micro- and nano-sized systems independently of their crystallographic symmetry. These rather remarkable discoveries are reviewed in this paper in the perspective of the… ▽ More Recently acoustic signature of dislocation avalanches in HCP materials was found to be long tailed in size and energy, suggesting critical dynamics. Even more recently, the intermittent plastic response was found to be generic for micro- and nano-sized systems independently of their crystallographic symmetry. These rather remarkable discoveries are reviewed in this paper in the perspective of the recent studies performed in our group. We discuss the physical origin and the scaling properties of plastic fluctuations and address the nature of their dependence on crystalline symmetry, system size, and disorder content. A particular emphasis is placed on the associated emergent behaviors, including the formation of dislocation structures, and on our ability to temper plastic fluctuations by alloying. We also discuss the "smaller is wilder" size effect that culminates in a paradoxical crack-free brittle behavior of very small, initially dislocation free crystals. We show that the implied transition between different rheological behaviors is regulated by the ratio of length scales $R=L/l$, where $L$ is the system size and $l$ is the internal length. We link this new size effect with other related phenomena like size dependence of strength ("smaller is stronger") and the size induced switch between different hardening mechanisms. One of the technological challenges in nanoscience is to tame the intermittency of plastic flow. We show that this task can be accomplished by generating tailored quenched disorder which allows one to control micro- and nano-scale forming and opens new perspectives in micro-metallurgy and structural engineering of ultra-small load-carrying elements. These results could not be achieved by conventional methods that do not explicitly consider the stochastic nature of collective dislocation dynamics. △ Less

Submitted 22 May, 2021; v1 submitted 23 December, 2020; originally announced December 2020.

De-localizing brittle fracture

Authors: O. U. Salman, L. Truskinovsky

Abstract: Extreme localization of damage in conventional brittle materials is the source of a host of undesirable effects. We show how artificially engineered metamaterials with all brittle constituents can be designed to ensure that every breakable sub-element fails independently. The main role in the proposed design is played by high contrast composite sub-structure with zero-stiffness, furnishing nonloca… ▽ More Extreme localization of damage in conventional brittle materials is the source of a host of undesirable effects. We show how artificially engineered metamaterials with all brittle constituents can be designed to ensure that every breakable sub-element fails independently. The main role in the proposed design is played by high contrast composite sub-structure with zero-stiffness, furnishing nonlocal stress redistribution. The ability to de-localize cracking in such nominally brittle systems is revealed by the fact that their continuum description is dominated by the gradient (bending) rather than classical (stretching) elasticity. By engineering a crossover from brittle to effectively ductile (quasi-brittle) behavior in prototypical systems of this type, we reveal the structural underpinning behind the difference between fracture and damage. △ Less

Submitted 2 June, 2021; v1 submitted 1 November, 2020; originally announced November 2020.

Atomistic simulation of martensite microstructural evolution during temperature driven $β\rightarrow α$ transition in pure titanium

Authors: C. Baruffi, A. Finel, Y. Le Bouar, B. Bacroix, O. U. Salman

Abstract: Titanium and its alloys undergo temperature-driven martensitic phase transformation leading to the development of complex microstructures at mesoscale. Optimizing the mechanical properties of these materials requires an understanding of the correlations between the processing parameters and the mechanisms involved in the microstructure formation and evolution. In this work, we study the temperatur… ▽ More Titanium and its alloys undergo temperature-driven martensitic phase transformation leading to the development of complex microstructures at mesoscale. Optimizing the mechanical properties of these materials requires an understanding of the correlations between the processing parameters and the mechanisms involved in the microstructure formation and evolution. In this work, we study the temperature-induced phase transition from BCC to HCP in pure titanium by atomistic modeling and investigate the influence of local stress conditions on the final martensite morphology. We simulate the transition under different stress conditions and carry a detailed analysis of the microstructural evolution during transition using a deformation gradient map that characterizes the local lattice distortion. The analysis of final martensite morphologies shows how mechanical constraints influence the number of selected variants and the number/type of defects in the final microstructure. We give insight on the origin and structure of different interfaces experimentally observed, such as inter-variant boundaries and antiphase defects. In particular, we show how antiphase defects originate from the two-fold degeneracy shuffling displacement arriving during the transition and how the triple junction formation drives the texture evolution when local stresses prevent a free shape change of the matrix surrounding the growing martensite nuclei. △ Less

Submitted 11 August, 2021; v1 submitted 5 August, 2020; originally announced August 2020.

Tempering the mechanical response of FCC micro-pillars: an Eulerian plasticity approach

Authors: Oguz Umut Salman, Ioan R. Ionescu

Abstract: The mechanical response of almost pure single-crystal micro-pillars under compression exhibits a highly localized behavior that can endanger the structural stability of a sample. Recent experiments revealed that the mechanical response of a crystal is very sensitive to both the presence of a quenched disorder in the sample and the orientation of the crystal. In this work, we study the influence of… ▽ More The mechanical response of almost pure single-crystal micro-pillars under compression exhibits a highly localized behavior that can endanger the structural stability of a sample. Recent experiments revealed that the mechanical response of a crystal is very sensitive to both the presence of a quenched disorder in the sample and the orientation of the crystal. In this work, we study the influence of disorder and crystal orientation on the large strain response of a 2D FCC crystal with three active glide planes using a very simple Eulerian plasticity model in the FE framework. Our numerical and theoretical results on clean crystal pillars suggest that a single plane or many gliding planes can be activated depending on the crystal orientation. While in the former case, the deformation is localized, leading to ductile rupture, in the latter, a complex interplay between active planes takes place, resulting in a more uniform deformation. The strain-localization can be avoided when inhomogeneities are engineered inside the crystal, or the crystal orientation is altered because of the activation of multiple slip systems, resulting in a "patchwork" of the distribution of the slip systems. △ Less

Submitted 9 May, 2020; originally announced May 2020.

Variety of scaling behaviors in nanocrystalline plasticity

Authors: P. Zhang, O. U. Salman, J. Weiss, L. Truskinovsky

Abstract: We address the question of why larger, high symmetry crystals are mostly weak, ductile and statistically sub-critical, while smaller crystals with the same symmetry are strong, brittle and super-critical. We link it to another question of why intermittent elasto-plastic deformation of sub-micron crystals features highly unusual size sensitivity of scaling exponents. We use a minimal integer-valued… ▽ More We address the question of why larger, high symmetry crystals are mostly weak, ductile and statistically sub-critical, while smaller crystals with the same symmetry are strong, brittle and super-critical. We link it to another question of why intermittent elasto-plastic deformation of sub-micron crystals features highly unusual size sensitivity of scaling exponents. We use a minimal integer-valued automaton model of crystal plasticity to show that with growing variance of quenched disorder, which can serve in this case as a proxy for increasing size, sub-micron crystals undergo a crossover from spin-glass marginality to criticality characterizing the second order brittle-to-ductile (BD) transition. We argue that this crossover is behind the non-universality of scaling exponents observed in physical and numerical experiments. The non-universality emerges only if the quenched disorder is elastically incompatible and it disappears if the disorder is compatible. △ Less

Submitted 23 June, 2020; v1 submitted 18 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. E 102, 023006 (2020)

Landau theory of bending-to-stretching transition

Authors: O. U. Salman, G. Vitale, L. Truskinovsky

Abstract: Transition from bending-dominated to stretching-dominated elastic response in semi-flexible fibrous networks plays an important role in the mechanical behavior of cells and tissues. It is induced by changes in network connectivity and relies on construction of new cross-links. We propose a simple continuum model of this transition with macroscopic strain playing the role of order parameter. An unu… ▽ More Transition from bending-dominated to stretching-dominated elastic response in semi-flexible fibrous networks plays an important role in the mechanical behavior of cells and tissues. It is induced by changes in network connectivity and relies on construction of new cross-links. We propose a simple continuum model of this transition with macroscopic strain playing the role of order parameter. An unusual feature of this Landau-type theory is that it is based on a single-well potential. We predict that bending-to-stretching transition proceeds through propagation of the localized fronts separating domains with affine and non-affine elastic response. △ Less

Submitted 6 July, 2019; v1 submitted 4 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. E 100, 051001 (2019)

Landau theory of crystal plasticity

Authors: R. Baggio, E. Arbib, P. Biscari, S. Conti, L. Truskinovsky, G. Zanzotto, O. U. Salman

Abstract: We show that nonlinear continuum elasticity can be effective in modeling plastic flows in crystals if it is viewed as Landau theory with an infinite number of equivalent energy wells whose configuration is dictated by the symmetry group GL(3,Z). Quasi-static loading can be then handled by athermal dynamics, while lattice based discretization can play the role of regularization. As a proof of princ… ▽ More We show that nonlinear continuum elasticity can be effective in modeling plastic flows in crystals if it is viewed as Landau theory with an infinite number of equivalent energy wells whose configuration is dictated by the symmetry group GL(3,Z). Quasi-static loading can be then handled by athermal dynamics, while lattice based discretization can play the role of regularization. As a proof of principle, we study in this Letter dislocation nucleation in a homogeneously sheared 2D crystal and show that the global tensorial invariance of the elastic energy foments the development of complexity in the configuration of collectively nucleating defects. A crucial role in this process is played by the unstable higher symmetry crystallographic phases, traditionally thought to be unrelated to plastic flow in lower symmetry lattices. △ Less

Submitted 20 April, 2019; v1 submitted 6 April, 2019; originally announced April 2019.

Journal ref: Phys. Rev. Lett. 123, 205501 (2019)

A Cosserat crystal plasticity and phase field theory for grain boundary migration

Authors: Anna Ask, Samuel Forest, Benoit Appolaire, Kais Ammar, Oguz Umut Salman

Abstract: The microstructure evolution due to thermomechanical treatment of metals can largely be described by viscoplastic deformation, nucleation and grain growth. These processes take place over different length and time scales which present significant challenges when formulating simulation models. In particular, no overall unified field framework exists to model concurrent viscoplastic deformation and… ▽ More The microstructure evolution due to thermomechanical treatment of metals can largely be described by viscoplastic deformation, nucleation and grain growth. These processes take place over different length and time scales which present significant challenges when formulating simulation models. In particular, no overall unified field framework exists to model concurrent viscoplastic deformation and recrystallization and grain growth in metal polycrystals. In this work a thermodynamically consistent diffuse interface framework incorporating crystal viscoplasticity and grain boundary migration is elaborated. The Kobayashi--Warren--Carter (KWC) phase field model is extended to incorporate the full mechanical coupling with material and lattice rotations and evolution of dislocation densities. The Cosserat crystal plasticity theory is shown to be the appropriate framework to formulate the coupling between phase field and mechanics with proper distinction between bulk and grain boundary behaviour. △ Less

Submitted 14 October, 2018; v1 submitted 30 May, 2018; originally announced May 2018.

Comments: Accepted manuscript. Funded under the European Union (EU) Horizon 2020 Marie Sklodowska-Curie action; MIGRATE, grant number 707392

Journal ref: Journal of the Mechanics and Physics of Solids 115 (2018) 167-194

Taming intermittent plasticity at small scales

Authors: Peng Zhanga, Oguz Umut Salman, Jin-Yu Zhang, Gang Liu, Jérôme Weiss, Lev Truskinovsky, Jun Sun

Abstract: The extreme miniaturization in modern technology calls for deeper insights into the non-conventional, fluctuation dominated mechanics of materials at micro- to nano-scales. Both experiments and simulations show that sub-micron face-centered-cubic (FCC) crystals exhibit high yield strength, which is, however, compromised by intermittent, power law distributed strain fluctuations, typical of wild pl… ▽ More The extreme miniaturization in modern technology calls for deeper insights into the non-conventional, fluctuation dominated mechanics of materials at micro- to nano-scales. Both experiments and simulations show that sub-micron face-centered-cubic (FCC) crystals exhibit high yield strength, which is, however, compromised by intermittent, power law distributed strain fluctuations, typical of wild plasticity. At macro-scales, the same bulk materials show mild plasticity characterized by bounded, uncorrelated fluctuations. Both anomalous strength and intermittency appear therefore as size effects. While the former is highly desirable, the latter is detrimental because stochastic dislocation avalanches interfere with forming processes and endanger structural stability. In this paper we show that defectiveness, which is used in classical metallurgy to harden materials, can be used at sub-micron scales to suppress intermittent fluctuations. We quantify the coexistence of wild and mild fluctuations in compressed Al alloys micro-pillars, demonstrate that the statistical nature of fluctuations is determined by sample size, and propose quantitative strategies allowing one to temper plastic intermittency by artificially tailored disorder. Our experimental results are rationalized using a theoretical framework which quantifies the competition between external (size related) and internal (disorder related) length scales. △ Less

Submitted 10 October, 2016; originally announced October 2016.

Comments: 36 pages, 15 figues

Volume changes during active shape fluctuations in cells

Authors: Alessandro Taloni, Elena Kardash, Oguz Umut Salman, Lev Truskinovsky, Stefano Zapperi, Caterina A. M. La Porta

Abstract: Cells modify their volume in response to changes in osmotic pressure but it is usually assumed that other active shape variations do not involve significant volume fluctuations. Here we report experiments demonstrating that water transport in and out of the cell is needed for the formation of blebs, commonly observed protrusions in the plasma membrane driven by cortex contraction. We develop and s… ▽ More Cells modify their volume in response to changes in osmotic pressure but it is usually assumed that other active shape variations do not involve significant volume fluctuations. Here we report experiments demonstrating that water transport in and out of the cell is needed for the formation of blebs, commonly observed protrusions in the plasma membrane driven by cortex contraction. We develop and simulate a model of fluid mediated membrane-cortex deformations and show that a permeable membrane is necessary for bleb formation which is otherwise impaired. Taken together our experimental and theoretical results emphasize the subtle balance between hydrodynamics and elasticity in actively driven cell morphological changes. △ Less

Submitted 13 May, 2015; originally announced May 2015.

Comments: Phys. Rev. Lett. in press. 13 pages 4 figures, 9 supplementary figures

The role of phase compatibility in martensite

Authors: Oguz Umut Salman, Alphonse Finel, Remi Delville, Dominique Schryvers

Abstract: Shape memory alloys inherit their macroscopic properties from their mesoscale microstructure originated from the martensitic phase transformation. In a cubic to orthorhombic transition, a single variant of marten- site can have a compatible (exact) interface with the austenite for some special lattice parameters in contrast to conventional austenite/twinned martensite interface with a transition l… ▽ More Shape memory alloys inherit their macroscopic properties from their mesoscale microstructure originated from the martensitic phase transformation. In a cubic to orthorhombic transition, a single variant of marten- site can have a compatible (exact) interface with the austenite for some special lattice parameters in contrast to conventional austenite/twinned martensite interface with a transition layer. Experimentally, the phase compat- ibility results in a dramatic drop in thermal hysteresis and gives rise to very stable functional properties over cycling. Here, we investigate the microstructures observed in Ti50Ni50-xPdx alloys that undergo a cubic to orthorhombic martensitic transformation using a three dimensional phase field approach. We will show that the simulation results are in very good agreement with transmission electron microscopy observations. However, the understanding of the drop in thermal hysteresis requires the coupling of phase transformation with plastic activity. We will discuss this point within the framework of thermoelasticity, which is a generic feature of the martensitic transformation. △ Less

Submitted 23 April, 2012; originally announced April 2012.

Comments: Accepted for publication in in Journal of Applied Physics

On the critical nature of plastic flow: one and two dimensional models

Authors: Oguz Umut Salman, Lev Truskinovsky

Abstract: Steady state plastic flows have been compared to developed turbulence because the two phenomena share the inherent complexity of particle trajectories, the scale free spatial patterns and the power law statistics of fluctuations. The origin of the apparently chaotic and at the same time highly correlated microscopic response in plasticity remains hidden behind conventional engineering models which… ▽ More Steady state plastic flows have been compared to developed turbulence because the two phenomena share the inherent complexity of particle trajectories, the scale free spatial patterns and the power law statistics of fluctuations. The origin of the apparently chaotic and at the same time highly correlated microscopic response in plasticity remains hidden behind conventional engineering models which are based on smooth fitting functions. To regain access to fluctuations, we study in this paper a minimal mesoscopic model whose goal is to elucidate the origin of scale free behavior in plasticity. We limit our description to fcc type crystals and leave out both temperature and rate effects. We provide simple illustrations of the fact that complexity in rate independent athermal plastic flows is due to marginal stability of the underlying elastic system. Our conclusions are based on a reduction of an over-damped visco-elasticity problem for a system with a rugged elastic energy landscape to an integer valued automaton. We start with an overdamped one dimensional model and show that it reproduces the main macroscopic phenomenology of rate independent plastic behavior but falls short of generating self similar structure of fluctuations. We then provide evidence that a two dimensional model is already adequate for describing power law statistics of avalanches and fractal character of dislocation patterning. In addition to capturing experimentally measured critical exponents, the proposed minimal model shows finite size scaling collapse and generates realistic shape functions in the scaling laws. △ Less

Submitted 21 February, 2012; originally announced February 2012.

Comments: 72 pages, 40 Figures, International Journal of Engineering Science for the special issue in honor of Victor Berdichevsky, 2012

A minimal integer automaton behind crystal plasticity

Authors: Oguz Umut Salman, Lev Truskinovsky

Abstract: Power law fluctuations and scale free spatial patterns are known to characterize steady state plastic flow in crystalline materials. In this Letter we study the emergence of correlations in a simple Frenkel-Kontorova (FK) type model of 2D plasticity which is largely free of arbitrariness, amenable to analytical study and is capable of generating critical exponents matching experiments. Our main ob… ▽ More Power law fluctuations and scale free spatial patterns are known to characterize steady state plastic flow in crystalline materials. In this Letter we study the emergence of correlations in a simple Frenkel-Kontorova (FK) type model of 2D plasticity which is largely free of arbitrariness, amenable to analytical study and is capable of generating critical exponents matching experiments. Our main observation concerns the possibility to reduce continuum plasticity to an integer valued automaton revealing inherent discreteness of the plastic flow. △ Less

Submitted 13 April, 2011; originally announced April 2011.

Comments: 4 pages, 5 figures

Origin of stabilization of macrotwin boundaries in martensites

Authors: O. U. Salman, B. K. Muite, A. Finel

Abstract: The origin of stabilization of complex microstructures along macrotwin boundaries in martensites is explained by comparing two models based on Ginzburg-Landau theory. The first model incorporates a geometrically nonlinear strain tensor to ensure that the Landau energy is invariant under rigid body rotations, while the second model uses a linearized strain tensor under the assumption that deformati… ▽ More The origin of stabilization of complex microstructures along macrotwin boundaries in martensites is explained by comparing two models based on Ginzburg-Landau theory. The first model incorporates a geometrically nonlinear strain tensor to ensure that the Landau energy is invariant under rigid body rotations, while the second model uses a linearized strain tensor under the assumption that deformations and rotations are small. We show that the approximation in the second model does not always hold for martensites and that the experimental observations along macrotwin boundaries can only be reproduced by the geometrically nonlinear (exact) theory. △ Less

Submitted 25 January, 2011; originally announced January 2011.

Journal ref: https://doi.org/10.1140/epjb/e2018-90579-4