-
Observing the crack tip behaviour at the nanoscale during fracture of ceramics
Authors:
Oriol Gavalda-Diaz,
Max Emmanuel,
Katharina Marquardt,
Eduardo Saiz,
Finn Giuliani
Abstract:
Ultimately, brittle fracture involves breaking atomic bonds. However, we still lack a clear picture of what happens in the highly deformed region around a moving crack tip. Consequently, we still cannot link nano to atomic-scale phenomena with the macroscopic toughness of materials. The unsolved challenge is to observe the movement of the crack front at the nanoscale while extracting quantitative…
▽ More
Ultimately, brittle fracture involves breaking atomic bonds. However, we still lack a clear picture of what happens in the highly deformed region around a moving crack tip. Consequently, we still cannot link nano to atomic-scale phenomena with the macroscopic toughness of materials. The unsolved challenge is to observe the movement of the crack front at the nanoscale while extracting quantitative information. Here we address this challenge by monitoring stable crack growth inside a TEM. Our analysis demonstrates how phase transformation toughening, previously thought to be effective at the microscale and above, promotes crack deflection at the nano-level and increases the fracture resistance by ~50%. The work will help to connect the atomistic and continuous view of fracture in a way that can guide the design of the next generation of strong and tough materials demanded by technologies as diverse as healthcare, energy generation or transport.
△ Less
Submitted 19 July, 2024;
originally announced July 2024.
-
Inorganic/inorganic composites through emulsion templating
Authors:
Tianhui Jiang,
Shitong Zhou,
Yinglun Hong,
Erik Poloni,
Eduardo Saiz,
Florian Bouville
Abstract:
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactor to energy storage devices. Their microstructures dictate a number of properties, such as mass transport or fracture resistance. There has been a multitude of process developed to control the microstructure of inorganic/inorganic composites, from powder mixing and the use of sho…
▽ More
Inorganic/inorganic composites are found in multiple applications crucial for the energy transition, from nuclear reactor to energy storage devices. Their microstructures dictate a number of properties, such as mass transport or fracture resistance. There has been a multitude of process developed to control the microstructure of inorganic/inorganic composites, from powder mixing and the use of short or long fibre, to tape casting for laminates up to recently 3D printing. Here, we combined emulsions and slip casting into a simpler, broadly available, inexpensive processing platform that allow for in situ control of a composite's microstructure that also enables complex shaping. Emulsions are used to form droplets of controllable size of one inorganic phase into another, while slip casting enable 3D shaping of the final part. Our study shows that slip casting emulsions trigger a two-steps solvent removal that opens the possibility for conformal coating of porosity. By making magnetically responsive droplets, we form inorganic fibre inside an inorganic matrix during slip casting, demonstrating a simple fabrication for long-fibre reinforced composites. We exemplify the potential of this processing platform by making strong and lightweight alumina scaffolds reinforced by a confirmed zirconia coating and alumina with metallic iron fibres that displays work of fracture an order of magnitude higher than alumina.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
Authors:
Julie Russias,
Eduardo Saiz,
Sylvain Deville,
Karol Gryn,
G. Liu,
Ravi K. Nalla,
Antoni P. Tomsia
Abstract:
A key issue for the fabrication of scaffolds for tissue engineering is the development of processing techniques flexible enough to produce materials with a wide spectrum of solubility (bioresorption rates) and mechanical properties matching those of calcified tissues. These techniques must also have the capability of generating adequate porosity to further serve as a framework for cell penetration…
▽ More
A key issue for the fabrication of scaffolds for tissue engineering is the development of processing techniques flexible enough to produce materials with a wide spectrum of solubility (bioresorption rates) and mechanical properties matching those of calcified tissues. These techniques must also have the capability of generating adequate porosity to further serve as a framework for cell penetration, new bone formation, and subsequent remodeling. In this study, we show how hybrid organic/inorganic scaffolds with controlled microstructures can be built using robotic assisted deposition at room temperature. Polylactide or polycaprolactone scaffolds with pore sizes ranging between 200-500 μm and hydroxyapatite contents up to 70 wt % were fabricated. Compressive tests revealed an anisotropic behavior of the scaffolds, strongly dependent on their chemical composition. The inclusion of an inorganic component increased their stiffness but they were not brittle and could be easily machined even for ceramic contents up to 70 wt%. The mechanical properties of hybrid scaffolds did not degrade significantly after 20 days in simulated body fluid. However, the stiffness of pure polylactide scaffolds increased drastically due to polymer densification. Scaffolds containing bioactive glasses were also printed. After 20 days in simulated body fluid they developed an apatite layer on their surface.
△ Less
Submitted 28 March, 2018;
originally announced April 2018.
-
Artificial Bone and Teeth through Controlled Ice Growth in Colloidal Suspensions
Authors:
Antoni P. Tomsia,
Eduardo Saiz,
Sylvain Deville
Abstract:
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina and hydroxyapatite (HAP) by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous ceramic structures with homogeneous and well-defined arch…
▽ More
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina and hydroxyapatite (HAP) by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous ceramic structures with homogeneous and well-defined architecture. These porous materials can be infiltrated with a second phase of choice to yield biomimetic nacre-like composites with improved mechanical properties, which could be used for artificial bone and teeth applications. Proper control of the solidification patterns provides powerful means of control over the final functional properties. We discuss the relationships between the experimental results, ice growth fundamentals, the physics of ice and the interaction between inert particles and the solidification front during directional freezing.
△ Less
Submitted 30 March, 2018;
originally announced April 2018.
-
Ice-templated porous alumina structures
Authors:
Sylvain Deville,
Eduardo Saiz,
Antoni P. Tomsia
Abstract:
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous alumina structures with homogeneous and well-defined architecture. We discuss the…
▽ More
The formation of regular patterns is a common feature of many solidification processes involving cast materials. We describe here how regular patterns can be obtained in porous alumina by controlling the freezing of ceramic slurries followed by subsequent ice sublimation and sintering, leading to multilayered porous alumina structures with homogeneous and well-defined architecture. We discuss the relationships between the experimental results, the physics of ice and the interaction between inert particles and the solidification front during directional freezing. The anisotropic interface kinetics of ice leads to numerous specific morphologies features in the structure. The structures obtained here could have numerous applications including ceramic filters, biomaterials, and could be the basis for dense multilayered composites after infiltration with a selected second phase.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
Authors:
Sylvain Deville,
Eduardo Saiz,
Antoni Tomsia
Abstract:
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze-casting can be applied to synt…
▽ More
Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze-casting can be applied to synthesize porous hydroxyapatite scaffolds exhibiting unusually high compressive strength, e.g. up to 145 MPa for 47% porosity and 65 MPa for 56% porosity. The materials are characterized by well-defined pore connectivity along with directional and completely open porosity. Various parameters affecting the porosity and compressive strength have been investigated, including initial slurry concentration, freezing rate, and sintering conditions. The implications and potential application as bone substitute are discussed. These results might open the way for hydroxyapatite-based materials designed for load-bearing applications. The biological response of these materials is yet to be tested.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Freezing as a path to build complex composites
Authors:
Sylvain Deville,
Eduardo Saiz,
Ravi K. Nalla,
Antoni P. Tomsia
Abstract:
Materials that are strong, ultra-light weight and tough are in demand for a range of applications, requiring architectures and components carefully designed from the micrometer down to nanometer scales. Nacre-a structure found in many molluscan shells-and bone are frequently used as examples for how nature achieves this through hybrid organic-inorganic composites. Unfortunately, it has proven extr…
▽ More
Materials that are strong, ultra-light weight and tough are in demand for a range of applications, requiring architectures and components carefully designed from the micrometer down to nanometer scales. Nacre-a structure found in many molluscan shells-and bone are frequently used as examples for how nature achieves this through hybrid organic-inorganic composites. Unfortunately, it has proven extremely difficult to transcribe nacre-like clever designs into synthetic materials, partly because their intricate structures need to be replicated at several length scales. We demonstrate how the physics of ice formation can be used to develop sophisticated porous and layered-hybrid materials, including artificial bone, ceramic/metal composites, and porous scaffolds for osseous tissue regeneration with strengths up to four times higher than those currently used for implantation.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Architectural control of freeze-cast ceramics through additives and templating
Authors:
Etienne Munch,
Eduardo Saiz,
Antoni P. Tomsia,
Sylvain Deville
Abstract:
The freezing of concentrated colloidal suspensions is a complex physical process involving a large number of parameters. These parameters provide unique tools to manipulate the architecture of freeze-cast materials at multiple length scales in a single processing step. However, we are still far from developing predictive models to describe the growth of ice crystals in concentrated particle slurri…
▽ More
The freezing of concentrated colloidal suspensions is a complex physical process involving a large number of parameters. These parameters provide unique tools to manipulate the architecture of freeze-cast materials at multiple length scales in a single processing step. However, we are still far from developing predictive models to describe the growth of ice crystals in concentrated particle slurries. In order to exert reliable control over the microstructural formation of freeze-cast materials, it is necessary to reach a deeper understanding of the basic relationships between the experimental conditions and the microstructure of the growing solid. In this work, we explore the role of several processing variables (e.g., composition of the suspension, freezing rate, and patterning of the freezing surface) that could affect the formulation strategies for the architectural manipulation of freeze-cast materials. We also demonstrate, using freeze-cast lamellar structures, how reducing the lamellar thickness by less than half increases compressive strength by more than one order of magnitude.
△ Less
Submitted 11 October, 2017;
originally announced October 2017.
-
Modeling of the self-limited growth in catalytic chemical vapor deposition of graphene
Authors:
HoKwon Kim,
Eduardo Saiz,
Manish Chhowalla,
Cecilia Mattevi
Abstract:
The development of wafer-scale continuous single-crystal graphene layers is key in view of its prospective applications. To this end, here we pave the way for a graphene growth model in the framework of the Langmuir adsorption theory and two dimensional crystallization. In specific, we model the nucleation and growth of graphene on copper using methane as carbon precursor. The model leads to ident…
▽ More
The development of wafer-scale continuous single-crystal graphene layers is key in view of its prospective applications. To this end, here we pave the way for a graphene growth model in the framework of the Langmuir adsorption theory and two dimensional crystallization. In specific, we model the nucleation and growth of graphene on copper using methane as carbon precursor. The model leads to identification of the range of growth parameters (temperature and gas pressures) that uniquely entails the final surface coverage of graphene. This becomes an invaluable tool to address the fundamental problems of continuity of polycrystalline graphene layers, and crystalline grain dimensions. The model shows agreement with the existing experimental data in the literature. On the basis of the "contour map" for graphene growth developed here and existing evidence of optimized growth of large graphene grains, novel insights for engineering wafer-scale continuous graphene films are provided.
△ Less
Submitted 12 April, 2013; v1 submitted 1 February, 2013;
originally announced February 2013.
-
Spin-Charge-Lattice Coupling through Resonant Multi-Magnon Excitations in Multiferroic BiFeO3
Authors:
M. O. Ramirez,
A. Kumar,
S. A. Denev,
Y. H. Chu,
J. Seidel,
L. Martin,
S-Y. Yang R. C. Rai,
X. Xue,
J. F. Ihlefeld,
N. Podraza,
E. Saiz,
S. Lee,
J. Klug,
S. W. Cheong,
M. J. Bedzyk,
O. Auciello,
D. G. Schlom,
J. Orenstein,
R. Ramesh,
J. L. Musfeldt,
A. P. Litvinchuk,
V. Gopalan
Abstract:
Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These…
▽ More
Spin-charge-lattice coupling mediated by multi-magnon processes is demonstrated in multiferroic BiFeO3. Experimental evidence of two and three magnons excitations as well as multimagnon coupling at electronic energy scales and high temperatures are reported. Temperature dependent Raman experiments show up to five resonant enhancements of the 2-magnon excitation below the Neel temperature. These are shown to be collective interactions between on-site Fe d-d electronic resonance, phonons and multimagnons
△ Less
Submitted 7 January, 2009; v1 submitted 24 March, 2008;
originally announced March 2008.
-
Two-phonon coupling to the antiferromagnetic phase transition in multiferroic BiFeO3
Authors:
Mariola O. Ramirez,
M. Krishnamurthi,
S. Denev,
A. Kumar,
Seung-Yeul Yang,
Ying-Hao Chu,
Eduardo Saiz,
Jan Seidel,
A. P Pyatakov,
A. Bush,
D. Viehland,
J. Orenstein,
R. Ramesh,
Venkatraman Gopalan
Abstract:
A prominent band centered at around 1000-1300 cm-1 and associated with resonant enhancement of two-phonon Raman scattering is reported in multiferroic BiFeO3 thin films and single crystals. A strong anomaly in this band occurs at the antiferromagnetic Neel temperature. This band is composed of three peaks, assigned to 2A4, 2E8, and 2E9 Raman modes. While all three peaks were found to be sensitiv…
▽ More
A prominent band centered at around 1000-1300 cm-1 and associated with resonant enhancement of two-phonon Raman scattering is reported in multiferroic BiFeO3 thin films and single crystals. A strong anomaly in this band occurs at the antiferromagnetic Neel temperature. This band is composed of three peaks, assigned to 2A4, 2E8, and 2E9 Raman modes. While all three peaks were found to be sensitive to the antiferromagnetic phase transition, the 2E8 mode, in particular, nearly disappears at TN on heating, indicating a strong spin-two phonon coupling in BiFeO3.
△ Less
Submitted 3 December, 2007;
originally announced December 2007.
