-
Localized Radiofrequency Heating for Enhanced Thermoelectric Energy Generation Using Natural Galena Ore
Authors:
Karthik R,
Yiwen Zheng,
Rajesh Kumar Sahu,
Punathil Raman Sreeram,
Soma Banik,
Aniruddh Vashisth,
Chandra Sekhar Tiwary
Abstract:
The efficiency of thermoelectric devices can be significantly enhanced by maintaining a stable temperature gradient, which can be achieved through localized heating. Radio waves serve as an ideal heat source for this purpose. In this study, we demonstrate the enhancement of thermoelectric performance in earth-abundant natural ore Galena (PbS) through localized radio frequency (RF) heating. RF heat…
▽ More
The efficiency of thermoelectric devices can be significantly enhanced by maintaining a stable temperature gradient, which can be achieved through localized heating. Radio waves serve as an ideal heat source for this purpose. In this study, we demonstrate the enhancement of thermoelectric performance in earth-abundant natural ore Galena (PbS) through localized radio frequency (RF) heating. RF heating experiments conducted at frequencies between \SI{35}{MHz} and \SI{45}{MHz} induced substantial localized heating in PbS, generating a temperature gradient of \SI{32}{K}. This resulted in a Seebeck voltage of \SI{-5.8}{mV/K}, approximately 13 times greater than the conventional Seebeck coefficient of PbS (\SI{440}{\micro V/K}). Additionally, a power factor of \SI{151}{mWm^{-1}K^{-2}} and an overall RF to thermoelectric conversion efficiency of 15\% were achieved. Molecular dynamics simulations corroborate the experimental findings, providing insights into the mechanism of thermal transport and RF-induced heating in PbS. These results highlight the potential of localized RF heating as an effective strategy for enhancing thermoelectric performance, with promising implications for ambient thermoelectric energy harvesting applications.
△ Less
Submitted 23 February, 2025;
originally announced February 2025.
-
Wrapping nonspherical vesicles at bio-membranes
Authors:
Ajit Kumar Sahu,
Rajkumar Malik,
Jiarul Midya
Abstract:
The wrapping of particles and vesicles by lipid bilayer membranes is a fundamental process in cellular transport and targeted drug delivery. Here, we investigate the wrapping behavior of nonspherical vesicles, such as ellipsoidal, prolate, oblate, and stomatocytes, by systematically varying the bending rigidity of the vesicle membrane and the tension of the planar membrane. Using the Helfrich Hami…
▽ More
The wrapping of particles and vesicles by lipid bilayer membranes is a fundamental process in cellular transport and targeted drug delivery. Here, we investigate the wrapping behavior of nonspherical vesicles, such as ellipsoidal, prolate, oblate, and stomatocytes, by systematically varying the bending rigidity of the vesicle membrane and the tension of the planar membrane. Using the Helfrich Hamiltonian, triangulated membrane models, and energy minimization techniques, we predict multiple stable wrapping states and identify the conditions for their coexistence. Our results demonstrate that softer vesicles bind more easily to planar membranes; however, achieving complete wrapping requires significantly higher adhesion strengths compared to rigid particles. As membrane tension increases, deep-wrapped states disappear at a triple point where shallow-wrapped, deep-wrapped, and complete-wrapped states coexist. The coordinates of the triple point are highly sensitive to the vesicle shape and stiffness. For stomatocytes, increasing stiffness shifts the triple point to higher adhesion strengths and membrane tensions, while for oblates it shifts to lower values, influenced by shape changes during wrapping. Oblate shapes are preferred in shallow-wrapped states and stomatocytes in deep-wrapped states. In contrast to hard particles, where optimal adhesion strength for complete wrapping occurs at tensionless membranes, complete wrapping of soft vesicles requires finite membrane tension for optimal adhesion strength. These findings provide new insights into the interplay between vesicle deformability, shape, and membrane properties, advancing our understanding of endocytosis and the design of advanced biomimetic delivery systems.
△ Less
Submitted 15 February, 2025;
originally announced February 2025.
-
Imprinting electrically switchable scalar spin chirality by anisotropic strain in a Kagome antiferromagnet
Authors:
Debjoty Paul,
Shivesh Yadav,
Shikhar Gupta,
Bikash Patra,
Nilesh Kulkarni,
Debashis Mondal,
Kaushal Gavankar,
Sourav K. Sahu,
Biswarup Satpati,
Bahadur Singh,
Owen Benton,
Shouvik Chatterjee
Abstract:
Topological chiral antiferromagnets, such as Mn$_{3}$Sn, are emerging as promising materials for next-generation spintronic devices due to their intrinsic transport properties linked to exotic magnetic configurations. Here, we demonstrate that anisotropic strain in Mn$_{3}$Sn thin films offers a novel approach to manipulate the magnetic ground state, unlocking new functionalities in this material.…
▽ More
Topological chiral antiferromagnets, such as Mn$_{3}$Sn, are emerging as promising materials for next-generation spintronic devices due to their intrinsic transport properties linked to exotic magnetic configurations. Here, we demonstrate that anisotropic strain in Mn$_{3}$Sn thin films offers a novel approach to manipulate the magnetic ground state, unlocking new functionalities in this material. Anisotropic strain reduces the point group symmetry of the manganese (Mn) Kagome triangles from $C_{3v}$ to $C_{1}$, significantly altering the energy landscape of the magnetic states in Mn$_{3}$Sn. This symmetry reduction enables even a tiny in-plane Dzyaloshinskii-Moriya (DM) interaction to induce canting of the Mn spins out of the Kagome plane. The modified magnetic ground state introduces a finite scalar spin chirality and results in a significant Berry phase in momentum space. Consequently, a large anomalous Hall effect emerges in the Kagome plane at room temperature - an effect that is absent in the bulk material. Moreover, this two-fold degenerate magnetic state enables the creation of multiple-stable, non-volatile anomalous Hall resistance (AHR) memory states. These states are field-stable and can be controlled by thermal assisted current-induced magnetization switching requiring modest current densities and small bias fields, thereby offering a compelling new functionality in Mn$_{3}$Sn for spintronic applications.
△ Less
Submitted 8 June, 2025; v1 submitted 4 November, 2024;
originally announced November 2024.
-
Transient segregation of different density granular mixtures
Authors:
Soniya Kumawat,
Vishnu Kumar Sahu,
Anurag Tripathi
Abstract:
We study time-dependent density segregation of granular mixtures flowing over an inclined plane. Discrete Element Method (DEM) simulations in a periodic box are performed for granular mixtures of same size and different density particles flowing under the influence of gravity. In addition, a continuum model is developed to solve the momentum balance equations along with species transport equation…
▽ More
We study time-dependent density segregation of granular mixtures flowing over an inclined plane. Discrete Element Method (DEM) simulations in a periodic box are performed for granular mixtures of same size and different density particles flowing under the influence of gravity. In addition, a continuum model is developed to solve the momentum balance equations along with species transport equation by accounting for the inter-coupling of segregation and rheology. The particle force-based density segregation theory has been used along with the $μ-I$ rheology to predict evolution of flow properties with time for binary and multicomponent mixtures. The effect of particle arrangements on the transient evolution of flow properties for three different initial configurations is investigated using both continuum and DEM simulations. Continuum predictions for various flow properties of interest such as species concentration, velocity, pressure, and shear stress at different time instants are compared with DEM simulations. The results from the discrete and continuum models are found to be in good agreement with each other for well-mixed and heavy-near-base initial configurations. However, the continuum model is unable to predict the flow evolution for the light-near-base initial configuration. DEM simulations reveal the presence of an instability driven, quick segregation for this configuration which is not predicted by the one dimensional model and requires generalization to three dimensions.
△ Less
Submitted 18 July, 2024;
originally announced July 2024.
-
Cracking of submerged beds
Authors:
Satyanu Bhadra,
Anit Sane,
Akash Ghosh,
Shankar Ghosh,
Kirti Chandra Sahu
Abstract:
We investigate the phenomena of crater formation and gas release caused by projectile impact on underwater beds, which occurs in many natural, geophysical, and industrial applications. The bed in our experiment is constructed of hydrophobic particles, which trap a substantial amount of air in its pores. In contrast to dry beds, the air-water interface in a submerged bed generates a granular skin t…
▽ More
We investigate the phenomena of crater formation and gas release caused by projectile impact on underwater beds, which occurs in many natural, geophysical, and industrial applications. The bed in our experiment is constructed of hydrophobic particles, which trap a substantial amount of air in its pores. In contrast to dry beds, the air-water interface in a submerged bed generates a granular skin that provides rigidity to the medium by producing skin over the bulk. The projectile's energy is used to reorganise the grains, which causes the skin to crack, allowing the trapped air to escape. The morphology of the craters as a function of impact energy in submerged beds exhibits different scaling laws than what is known for dry beds. This phenomenon is attributed to the contact line motion on the hydrophobic fractal-like surface of submerged grains. The volume of the gas released is a function of multiple factors, chiefly the velocity of the projectile, depth of the bed and depth of the water column.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Freezing of sessile droplet and frost halo formation
Authors:
Sivanandan Kavuri,
George Karapetsas,
Chander Shekhar Sharma,
Kirti Chandra Sahu
Abstract:
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The f…
▽ More
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The formation of the frost halo is associated with the inherent evaporation process in the early freezing stages. We observe a negative evaporation flux enveloping the droplet in the initial stages, which indicates that vapour produced during freezing condenses on the substrate close to the contact line, forming a frost halo. The condensate accumulation triggers re-evaporation, resulting in a temporal shift of the frost halo region away from the contact line. Eventually, it disappears due to the diffusive nature of the water vapour far away from the droplet. We found that increasing the relative humidity increases the lifetime of the frost halo due to a substantial reduction in evaporation that prolonged the presence of net condensate on the substrate. Increasing liquid volatility increases the evaporation flux, and condensation occurs closer to the droplet, as a higher amount of vapour is in the periphery of the droplet. We also found that decreasing the thermal conductivity of the substrate increases the total freezing time. The slower freezing process is accompanied by increased vaporized liquid, resulting in condensation with its concentration reaching supersaturation.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
U(1) quantum spin liquids in dipolar-octupolar pyrochlore magnets: a fermionic parton approach
Authors:
Krushna Chandra Sahu,
Sambuddha Sanyal
Abstract:
We study the uniform $U(1)$ quantum spin liquid (QSL) with low-energy fermionic quasiparticles for pyrochlore magnets with dipolar-octupolar symmetry, employing a fermionic parton mean field theory approach. Self-consistent calculations stabilize 12 fully symmetric uniform $U(1)$ QSLs; of which four mean-field states are "monopole-flux" states. Several of these mean-field states show a linear temp…
▽ More
We study the uniform $U(1)$ quantum spin liquid (QSL) with low-energy fermionic quasiparticles for pyrochlore magnets with dipolar-octupolar symmetry, employing a fermionic parton mean field theory approach. Self-consistent calculations stabilize 12 fully symmetric uniform $U(1)$ QSLs; of which four mean-field states are "monopole-flux" states. Several of these mean-field states show a linear temperature dependence of specific heat at low temperatures; the other phases show a power law temperature dependence of specific heat $C \sim T^α$, where $α$ is close to 1. We further compute the dynamic spin structure factors and discuss the possible signature of these fermionic spinons in neutron-scattering experiments on DO magnetic systems. Our results provide a possible way to understand the metallic specific heat response in $Nd_2 Sc Nb O_7$.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Comparison of empirical and particle force-based density segregation models
Authors:
Soniya Kumawat,
Vishnu Kumar Sahu,
Anurag Tripathi
Abstract:
The empirical and particle force-based models of granular segregation due to density differences among the species are compared in this work. Dependency of the empirical segregation parameters on the initial configuration, the observation time duration, inclination angle, and mixture composition are discussed in detail. The parameters obtained from empirical models are used to predict the steady-s…
▽ More
The empirical and particle force-based models of granular segregation due to density differences among the species are compared in this work. Dependency of the empirical segregation parameters on the initial configuration, the observation time duration, inclination angle, and mixture composition are discussed in detail. The parameters obtained from empirical models are used to predict the steady-state concentration profiles for different density ratios and compositions. In addition, we utilize the predictions from the particle force-based segregation model and compare them with the predictions of the empirical segregation models. Our results show that the linear empirical segregation model predictions agree well with the simulation results for mixtures rich in light species where as quadratic empirical segregation model works better for mixtures rich in heavy species. Particle force-based segregation model, on the other hand, seems to be in very good agreement with the DEM simulation data across all mixture compositions.
△ Less
Submitted 19 October, 2023;
originally announced October 2023.
-
Fabry-Pérot interference in Josephson junctions
Authors:
Sushil Kumar Sahu,
Abhiram Soori
Abstract:
Conductance of metallic heterostructures can be controlled by applying a gate voltage to a region in the transport channel. For sufficiently long phase coherent channels, oscillations appear in conductance versus chemical potential plot, which can be explained by Fabry-Pérot interference. In this work, we study DC Josephson effect in a superconductor-normal metal-superconductor junctions. The chem…
▽ More
Conductance of metallic heterostructures can be controlled by applying a gate voltage to a region in the transport channel. For sufficiently long phase coherent channels, oscillations appear in conductance versus chemical potential plot, which can be explained by Fabry-Pérot interference. In this work, we study DC Josephson effect in a superconductor-normal metal-superconductor junctions. The chemical potential of the normal metal (NM) region can be tuned by an applied gate voltage. We numerically obtain the Andreev bound states formed within the superconducting gap and calculate Josephson current by summing up the currents carried by the occupied Andreev bound states. We find that the Josephson current oscillates as a function of the chemical potential in the NM region, and these oscillations can be explained by Fabry-Pérot interference condition. We find that Josephson current carried by one bound state can be higher than that carried by two or more bound states.
△ Less
Submitted 24 August, 2023; v1 submitted 11 July, 2023;
originally announced July 2023.
-
Light-responsive nematic colloids and colloidal crystals
Authors:
Devika Venkuzhy Sudhakaran,
Dinesh Kumar Sahu,
Osamu Haba,
Surajit Dhara
Abstract:
Rational control over the periodic arrangement of particles by means of external stimuli is a technologically important aspect of colloidal science with important physical underpinnings. Here, a robust structural control of particle assemblies in a nematic liquid crystal (NLC) is demonstrated by dissolving trace amounts of light-responsive azo-dendrimer molecules which spontaneously get adsorbed o…
▽ More
Rational control over the periodic arrangement of particles by means of external stimuli is a technologically important aspect of colloidal science with important physical underpinnings. Here, a robust structural control of particle assemblies in a nematic liquid crystal (NLC) is demonstrated by dissolving trace amounts of light-responsive azo-dendrimer molecules which spontaneously get adsorbed on the particle surface. The azo-dendrimer molecules in the presence of external UV irradiation undergo conformational change (trans-cis); as a result, they transmit the mechanical torque to surrounding LC molecules and alter the near-field director orientation. The director re-orientation at the surface of the particles causes topological defect transformation which involves elastic dipoles, quadrupoles and hexadecapoles. The defect transformation can be emulated in colloidal assemblies towards different purposes such as rotation of chains and restructuring of 2D colloidal crystals. In this study, various topological aspects of light-activated defect transformation and its application in the collective manipulation of colloidal assemblies are presented.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Influence of Gold-Selenium Precursor Ratio on Synthesis and Structural Stability of α- and β-AuSe
Authors:
Aditya Kumar Sahu,
Satyabrata Raj
Abstract:
Gold selenide (AuSe) is a multilayer compound yet to be thoroughly studied. The colloidal synthesis and characterization of gold selenide nanoparticles are described, emphasizing the effect of different gold-to-selenium precursor ratios and temperatures on the crystal structure and form. The structural characterization is done using an X-ray diffraction pattern. The coexistence of the α- and β-AuS…
▽ More
Gold selenide (AuSe) is a multilayer compound yet to be thoroughly studied. The colloidal synthesis and characterization of gold selenide nanoparticles are described, emphasizing the effect of different gold-to-selenium precursor ratios and temperatures on the crystal structure and form. The structural characterization is done using an X-ray diffraction pattern. The coexistence of the α- and β-AuSe phases is observed in all synthesized samples. The morphologies of the mainly α-AuSe sample are nanobelts, whereas the primarily β-AuSe phase sample has a nanoplate-like structure, according to the TEM and SEM data. All of the samples had Raman vibrational modes with mixed phases. The effect of high pressure on as-prepared AuSe samples has been studied in this work. The introduction of external pressure and temperature allows both phases to transition. Pressure lowers the existence of other phase modes, and the corresponding dominating sample modes are entirely significant in our sample. The phase transition pressure was observed using Raman scattering. Our findings show that 2D AuSe has a lot of promise for multifunctional applications, encouraging more research on these systems.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Instabilities near ultrastrong coupling in microwave optomechanical cavity
Authors:
Soumya Ranjan Das,
Sourav Majumder,
Sudhir Kumar Sahu,
Ujjawal Singhal,
Tanmoy Bera,
Vibhor Singh
Abstract:
With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can…
▽ More
With artificially engineered systems, it is now possible to realize the coherent interaction rate, which can become comparable to the mode frequencies, a regime known as ultrastrong coupling (USC). We experimentally realize a cavity-electromechanical device using a superconducting waveguide cavity and a mechanical resonator. In the presence of a strong pump, the mechanical-polaritons splitting can nearly reach 81% of the mechanical frequency, overwhelming all the dissipation rates. Approaching the USC limit, the steady-state response becomes unstable. We systematically measure the boundary of the unstable response while varying the pump parameters. The unstable dynamics display rich phases, such as self-induced oscillations, period-doubling bifurcation, period-tripling oscillations, and ultimately leading to the chaotic behavior. The experimental results and their theoretical modeling suggest the importance of residual nonlinear interaction terms in the weak-dissipative regime.
△ Less
Submitted 18 August, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
Effect of spin-orbit coupling in one-dimensional quasicrystals with power-law hopping
Authors:
Deepak Kumar Sahu,
Sanjoy Datta
Abstract:
In the one-dimensional quasiperiodic Aubry-André-Harper Hamiltonian with nearest-neighbor hopping, all single-particle eigenstates undergo a phase transition from ergodic to localized states at a critical disorder strength $W_c/t = 2.0$. There is no mobility edge in this system. However, in the presence of power-law hopping having the form $1/r^a$, beyond a critical disorder strength mobility edge…
▽ More
In the one-dimensional quasiperiodic Aubry-André-Harper Hamiltonian with nearest-neighbor hopping, all single-particle eigenstates undergo a phase transition from ergodic to localized states at a critical disorder strength $W_c/t = 2.0$. There is no mobility edge in this system. However, in the presence of power-law hopping having the form $1/r^a$, beyond a critical disorder strength mobility edge appears for $a > 1$, while, for $0< a\leq 1$, a multifractal edge separates the extended and the multifractal states. In both these limits, depending on the strength of the disorder, lowest $β^s L$ states are delocalized. We have found that, in the presence of the spin-orbit coupling, the critical disorder strength is always larger irrespective of the value of the parameter $a$. Furthermore, we demonstrate that for $a\leq 1$, in the presence of spin-orbit coupling, there exists multiple multifractal edges, and the energy spectrum splits up into alternative bands of delocalized and multifractal states. Moreover, the location of the multifractal edges are generally given by the fraction $(β^s \pm β^m)$. The qualitative behavior of the energy spectrum remains unaffected for $a > 1$. However, in contrast to the previously reported results, we find that in this limit, similar to the other case, multiple mobility edges can exist with or without the spin-orbit coupling.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Novel Increase of Superconducting Critical Temperature of an Iron-Superconductor due to Ion Implantation
Authors:
Kriti R Sahu,
Thomas Wolf,
A K Mishra,
A Banerjee,
V Ganesan,
Udayan De
Abstract:
Energetic ion irradiation usually decreases superconducting critical temperature(Tc), with the few exceptions involving increases up to a few K only. However, our recent 2.5X10^15 Ar/cm2 irradiations by 1.5 MeV Ar6+ enhanced Tc of the single crystal Fe-superconductor Ba(Fe0.943Co0.057)2As2 by 8.2 K from its initial onset Tc of ~16.9 K as measured from the real part of the magnetic susceptibility,…
▽ More
Energetic ion irradiation usually decreases superconducting critical temperature(Tc), with the few exceptions involving increases up to a few K only. However, our recent 2.5X10^15 Ar/cm2 irradiations by 1.5 MeV Ar6+ enhanced Tc of the single crystal Fe-superconductor Ba(Fe0.943Co0.057)2As2 by 8.2 K from its initial onset Tc of ~16.9 K as measured from the real part of the magnetic susceptibility, matching measurements from the imaginary part, electrical resistivity and magnetization. Ozaki et al. (2016) explained their Tc increase of 0.5 K in FeSe0.5Te0.5 films with the thickness (t) < the irradiating proton range (R), as due to a nanoscale compressive strain developed from radiation damage of the lattice. Here, Ar irradiation with t > R results in an Ar implanted layer in our crystal. Implanted inert gas atoms often agglomerate into high-pressure bubbles to exert a large compressive strain on the lattice. We suggest that this additional compressive strain could be the reason for such a large (~49%) Tc increase.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Superconducting vortex-charge measurement using cavity electromechanics
Authors:
Sudhir Kumar Sahu,
Supriya Mandal,
Sanat Ghosh,
Mandar M. Deshmukh,
Vibhor Singh
Abstract:
As the magnetic field penetrates the surface of a superconductor, it results in the formation of flux-vortices. It has been predicted that the flux-vortices will have a charged vortex core and create a dipolelike electric field. Such a charge trapping in vortices is particularly enhanced in high-T$_c$ superconductors (HTS). Here, we integrate a mechanical resonator made of a thin flake of HTS Bi…
▽ More
As the magnetic field penetrates the surface of a superconductor, it results in the formation of flux-vortices. It has been predicted that the flux-vortices will have a charged vortex core and create a dipolelike electric field. Such a charge trapping in vortices is particularly enhanced in high-T$_c$ superconductors (HTS). Here, we integrate a mechanical resonator made of a thin flake of HTS Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ into a microwave circuit to realize a cavity-electromechanical device. Due to the exquisite sensitivity of cavity-based devices to the external forces, we directly detect the charges in the flux-vortices by measuring the electromechanical response of the mechanical resonator. Our measurements reveal the strength of surface electric dipole moment due to a single vortex core to be approximately 30~$|e|a_B$, equivalent to a vortex charge per CuO$_2$ layer of $3.7\times 10^{-2}|e|$, where $a_B$ is the Bohr radius and $e$ is the electronic charge.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
Defect-polymorphism controlled electrophoretic propulsion of anisometric microparticles in a nematic liquid crystal
Authors:
Devika V S,
Dinesh Kumar Sahu,
Ravi Kumar Pujala,
Surajit Dhara
Abstract:
Nontrivial shape of colloidal particles create complex elastic distortions and topological defects in liquid crystals and play a key role in governing their electrophoretic propulsion through the medium. Here, we report experimental results on defects and electrophoretic transport of anisometric (snowman-shaped) dielectric particles subjected to an alternating electric field perpendicular to the d…
▽ More
Nontrivial shape of colloidal particles create complex elastic distortions and topological defects in liquid crystals and play a key role in governing their electrophoretic propulsion through the medium. Here, we report experimental results on defects and electrophoretic transport of anisometric (snowman-shaped) dielectric particles subjected to an alternating electric field perpendicular to the director in a nematic liquid crystal. We demonstrate that the shape asymmetry gives rise to defect-polymorphism by nucleating point or ring defects at multiple locations on the particle and controls the direction as well as the magnitude of the electrophoretic propulsion. Our findings unveil a novel degree of freedom in translocating microparticles in liquid crystals for applications in microfluidics, controlled transport and assembly.
△ Less
Submitted 23 January, 2022;
originally announced January 2022.
-
Enhancement of optical properties and dielectric nature of Sm$_3$+doped Na$_2$O-ZnO-TeO$_2$ Glass materials
Authors:
Jyotindra Nath Mirdda,
Subhadipta Mukhopadhyay,
Kriti Ranjan Sahu,
Makhanlal Nanda Goswami
Abstract:
Samarium doped Na$_2$O-ZnO-TeO$_2$ (NZT) glasses were prepared by the melt quenching method. The glass-forming ability and glass stability of prepared glass was estimated by Hruby parameter using Differential Thermal Analysis (DTA) and Thermo-gravimetric Analysis (TGA). The study of FTIR spectra and X-ray diffraction described the ionic nature and the amorphous pattern of glass respectively. The a…
▽ More
Samarium doped Na$_2$O-ZnO-TeO$_2$ (NZT) glasses were prepared by the melt quenching method. The glass-forming ability and glass stability of prepared glass was estimated by Hruby parameter using Differential Thermal Analysis (DTA) and Thermo-gravimetric Analysis (TGA). The study of FTIR spectra and X-ray diffraction described the ionic nature and the amorphous pattern of glass respectively. The absorption peaks were observed for the transitions 6H5/2-4P3/2 at 402 nm,6H5/2-4M19/2 at 418 nm, 6H5/2-4I15/2 at 462 nm and 6H5/2-4I11/2 at 478 nm in the absorption spectra. The optical band gap energy (Eg) was calculated and observed to be decreased from 2.95 eV to 1.50 eV with doping concentration. The visible emission band was observed in the Sm3+ doped glass samples. The variation of dielectric constant with frequency was found to be independent for the frequency range 3 kHz - 2 MHz. The measurement of temperature-dependent dc conductivity showed Arrhenius type mechanism of conduction.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.
-
Electrophoresis of metal-dielectric Janus particles with dipolar director symmetry in nematic liquid crystals
Authors:
Dinesh Kumar Sahu,
Surajit Dhara
Abstract:
We study electrophoretic mobility of metal-dielectric Janus particles with dipolar director profile in two nematic liquid crystals (LCs) having same (positive) conductivity anisotropy and opposite dielectric anisotropy. The applied ac electric field is parallel and perpendicular to the director for the positive and negative dielectric anisotropy LCs, respectively. The velocity of the Janus particl…
▽ More
We study electrophoretic mobility of metal-dielectric Janus particles with dipolar director profile in two nematic liquid crystals (LCs) having same (positive) conductivity anisotropy and opposite dielectric anisotropy. The applied ac electric field is parallel and perpendicular to the director for the positive and negative dielectric anisotropy LCs, respectively. The velocity of the Janus particles in both LCs is significantly higher than that of the non-Janus particles. We map the electroosmotic flow fields surrounding the particles using microparticle image velocimetry ($μ$-PIV) and show that the flows on the metal hemisphere is stronger than that on the dielectric hemisphere and the pumping of LC along the direction of motion of the Janus particles is more than that of the non-Janus particles. For a given liquid crystal, particles with asymmetric surface properties is useful for enhancing their electrophoretic mobility and activity.
△ Less
Submitted 23 January, 2022; v1 submitted 20 November, 2021;
originally announced November 2021.
-
Localization, $\mathcal{PT}$-Symmetry Breaking and Topological Transitions in non-Hermitian Quasicrystals
Authors:
Aruna Prasad Acharya,
Aditi Chakrabarty,
Deepak Kumar Sahu,
Sanjoy Datta
Abstract:
According to the topological band theory of a Hermitian system, the different electronic phases are classified in terms of topological invariants, wherein the transition between the two phases characterized by a different topological invariant is the primary signature of a topological phase transition. Recently, it has been argued that the delocalization-localization transition in a quasicrystal,…
▽ More
According to the topological band theory of a Hermitian system, the different electronic phases are classified in terms of topological invariants, wherein the transition between the two phases characterized by a different topological invariant is the primary signature of a topological phase transition. Recently, it has been argued that the delocalization-localization transition in a quasicrystal, described by the non-Hermitian $\mathcal{PT}$-symmetric extension of the Aubry-André-Harper (AAH) Hamiltonian can also be identified as a topological phase transition. Interestingly, the $\mathcal{PT}$-symmetry also breaks down at the same critical point. However, in this article, we have shown that the delocalization-localization transition and the $\mathcal{PT}$-symmetry breaking are not connected to a topological phase transition. To demonstrate this, we have studied the non-Hermitian $\mathcal{PT}$-symmetric AAH Hamiltonian in the presence of Rashba Spin-Orbit (RSO) coupling. We have obtained an analytical expression of the topological transition point and compared it with the numerically obtained critical points. We have found that, except in some special cases, the critical point and the topological transition point are not the same. In fact, the delocalization-localization transition takes place earlier than the topological transition whenever they do not coincide.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Effect of Plasmonic Coupling in Different Assembly of Gold Nanorods Studied by FDTD
Authors:
Aditya K. Sahu,
Satyabrata Raj
Abstract:
The influence of the orientation of gold nanorods in different assemblies has been investigated using the Finite Difference Time Domain (FDTD) simulation method. To understand the relative orientation, we vary the size and angle in dimer geometries. Significant effects of plasmon coupling emerged in longitudinal resonances having end-to-end configurations of gold nanorods. The effect of orientatio…
▽ More
The influence of the orientation of gold nanorods in different assemblies has been investigated using the Finite Difference Time Domain (FDTD) simulation method. To understand the relative orientation, we vary the size and angle in dimer geometries. Significant effects of plasmon coupling emerged in longitudinal resonances having end-to-end configurations of gold nanorods. The effect of orientational plasmon coupling in dimers gives rise to both bonding and anti-bonding plasmon modes. Effects of various geometries like primary monomer, dimer, trimer, and tetramer structures have been explored and compared with their higher nanorod ensembles. The asymmetric spectral response in a 4 * 4 gold nanorods array indicates a Fano-like resonance. The variation of gap distance in ordered arrays allowed modulation of the Fano resonance mode. The plasmon modes' resonance wavelength and field enhancement have been tuned by varying the gap distance, angular orientation, size irregularity between the nanorods, and nanorod numbers in an array. The integrated nanostructures studied here are not only significant for fundamental research but also applications in plasmon-based devices.
△ Less
Submitted 2 November, 2021; v1 submitted 20 June, 2021;
originally announced June 2021.
-
Understanding the Coupling Mechanism of Gold Nanostructures by Finite-Difference Time-Domain Method
Authors:
Aditya K. Sahu,
Satyabrata Raj
Abstract:
Gold nanoparticle assemblies show a strong plasmonic response due to the combined effects of the individual nanoparticles' plasmon modes. Increasing the number of nanoparticles in structured assemblies leads to significant shifts in the optical and physical properties. We use Finite-Difference Time-Domain (FDTD) simulations to analyze the electromagnetic response of structurally ordered gold nanor…
▽ More
Gold nanoparticle assemblies show a strong plasmonic response due to the combined effects of the individual nanoparticles' plasmon modes. Increasing the number of nanoparticles in structured assemblies leads to significant shifts in the optical and physical properties. We use Finite-Difference Time-Domain (FDTD) simulations to analyze the electromagnetic response of structurally ordered gold nanorods in monomer and dimer configurations. The plasmonic coupling between nanorods in monomers or dimers configurations provides a unique technique for tuning the spectrum intensity, spatial distribution, and polarisation of local electric fields within and surrounding nanostructures. Our study shows an exponential coupling behavior when two gold nanorods are assembled in end-to-end and side-by-side dimer configurations with a small separation distance. The maximum electric field in the gaps between adjacent nanorods in end-to-end dimer configuration describes a more significant enhancement factor than the individual gold nanorod. Our FDTD simulation on dimer in end-to-end assembly for small separation distance up to ~ 40 nm can well explain the observed experimental growth dynamics of gold nanorods.
△ Less
Submitted 14 August, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Understanding blue shift of the longitudinal surface plasmon resonance during growth of gold nanorods
Authors:
Aditya K Sahu,
Anwesh Das,
Anirudha Ghosh,
Satyabrata Raj
Abstract:
We have investigated in detail the growth dynamics of gold nanorods with various aspect ratios in different surrounding environments. Surprisingly, a blue shift in the temporal evolution of colloidal gold nanorods in aqueous medium has been observed during the growth of nanorods by UV visible absorption spectroscopy. The longitudinal surface plasmon resonance peak evolves as soon as the nanorods s…
▽ More
We have investigated in detail the growth dynamics of gold nanorods with various aspect ratios in different surrounding environments. Surprisingly, a blue shift in the temporal evolution of colloidal gold nanorods in aqueous medium has been observed during the growth of nanorods by UV visible absorption spectroscopy. The longitudinal surface plasmon resonance peak evolves as soon as the nanorods start to grow from spheres, and the system undergoes a blue shift in the absorption spectra. Although a red-shift is expected as a natural phenomenon during the growth process of all nanosystems, our blue shift observation is regarded as a consequence of competition between the parameters of growth solution and actual growth of nanorods. The growth of nanorods contributes to the red-shift which is hidden under the dominating contribution of the growth solution responsible for the observed massive blue shift.
△ Less
Submitted 11 June, 2021;
originally announced June 2021.
-
Optical and electrical properties of Nd3+doped Na2O-ZnO-TeO2 Material
Authors:
J. N. Mirdda,
S. Mukhopadhyay,
K. R. Sahu,
M. N. Goswami
Abstract:
Neodymium doped Na2O-ZnO-TeO2 (NZT) glasses were prepared by the conventional melt quenching technique. DTA and TG were used to confirmation of glass preparation through the glass transition temperature at 447°C for the glass system. The analysis of FTIR spectra and X-ray diffraction described the nature of the samples were ionic and amorphous respectively. The optical bandgap energy was estimated…
▽ More
Neodymium doped Na2O-ZnO-TeO2 (NZT) glasses were prepared by the conventional melt quenching technique. DTA and TG were used to confirmation of glass preparation through the glass transition temperature at 447°C for the glass system. The analysis of FTIR spectra and X-ray diffraction described the nature of the samples were ionic and amorphous respectively. The optical bandgap energy was estimated using absorption spectra and found to be decreased from 2.63eV to 1.32 eV due to the increase of doping concentration. The intensity of the emission spectra was enhanced for the higher concentration of Nd3+ ions. The dielectric constant of the glass samples was found to be constant for the large range of frequency (3 kHz to 1 MHz). The variation of conductivity with the temperature of the samples had shown the Arrhenius mechanism of conduction.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Electric field driven controllable motility of metal-dielectric Janus particles with boojum defects in a nematic liquid crystal
Authors:
Dinesh Kumar Sahu,
Surajit Dhara
Abstract:
In a sharp contrast to the response of silica particles we show that the metal-dielectric Janus particles with boojum defects in a nematic liquid crystal are self-propelled under the action of an electric field applied perpendicular to the director. The particles can be transported along any direction in the plane of the sample by selecting the appropriate orientation of the Janus vector with resp…
▽ More
In a sharp contrast to the response of silica particles we show that the metal-dielectric Janus particles with boojum defects in a nematic liquid crystal are self-propelled under the action of an electric field applied perpendicular to the director. The particles can be transported along any direction in the plane of the sample by selecting the appropriate orientation of the Janus vector with respect to the director. The direction of motion of the particles is controllable by varying the field amplitude and frequency. The command demonstrated on the motility of the particles is promising for tunable transport and microrobotic applications.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Self-duality of One-dimensional Quasicrystals with Spin-Orbit Interaction
Authors:
Deepak Kumar Sahu,
Aruna Prasad Acharya,
Debajyoti Choudhuri,
Sanjoy Datta
Abstract:
Non-interacting spinless electrons in one-dimensional quasicrystals, described by the Aubry-André-Harper (AAH) Hamiltonian with nearest neighbour hopping, undergoes metal to insulator transition (MIT) at a critical strength of the quasi-periodic potential. This transition is related to the self-duality of the AAH Hamiltonian. Interestingly, at the critical point, which is also known as the self-du…
▽ More
Non-interacting spinless electrons in one-dimensional quasicrystals, described by the Aubry-André-Harper (AAH) Hamiltonian with nearest neighbour hopping, undergoes metal to insulator transition (MIT) at a critical strength of the quasi-periodic potential. This transition is related to the self-duality of the AAH Hamiltonian. Interestingly, at the critical point, which is also known as the self-dual point, all the single particle wave functions are multifractal or non-ergodic in nature, while they are ergodic and delocalized (localized) below (above) the critical point. In this work, we have studied the one dimensional quasi-periodic AAH Hamiltonian in the presence of spin-orbit (SO) coupling of Rashba type, which introduces an additional spin conserving complex hopping and a spin-flip hopping. We have found that, although the self-dual nature of AAH Hamiltonian remains unaltered, the self-dual point gets affected significantly. Moreover, the effect of the complex and spin-flip hoppings are identical in nature. We have extended the idea of Kohn's localization tensor calculations for quasi-particles and detected the critical point very accurately. These calculations are followed by detailed multifractal analysis along with the computation of inverse participation ratio and von Neumann entropy, which clearly demonstrate that the quasi-particle eigenstates are indeed multifractal and non-ergodic at the critical point. Finally, we mapped out the phase diagram in the parameter space of quasi-periodic potential and SO coupling strength.
△ Less
Submitted 10 February, 2021; v1 submitted 3 February, 2021;
originally announced February 2021.
-
A novel method for measuring electric field induced dipole moments of metal-dielectric Janus particles in nematic liquid crystals
Authors:
Dinesh Kumar Sahu,
Surajit Dhara
Abstract:
Janus particles are special types of nano or micro particles possessing at least two surfaces with distinct physical or chemical properties. The most studied Janus particles are the metal-dielectric particles, in which half surface of dielectric particles is coated with a very thin layer of metals. The external electric field induces dipole moment, and consequently the particles exhibit self-assem…
▽ More
Janus particles are special types of nano or micro particles possessing at least two surfaces with distinct physical or chemical properties. The most studied Janus particles are the metal-dielectric particles, in which half surface of dielectric particles is coated with a very thin layer of metals. The external electric field induces dipole moment, and consequently the particles exhibit self-assembled dynamic structures in concentrated aqueous suspensions. Here, we study metal-dielectric Janus particles in a nematic liquid crystal under AC electric field and demonstrate a novel method for measuring effective induced dipole moments of the particles, through competition between elastic and electrostatic (Coulomb) forces of the two particles. The calculated polarisability of the particles based on a simple model agrees well with the effective polarisability measured in the experiments. Our findings have important bearing on functional materials based on metal-dielectric Janus particles dispersed in an anisotropic medium.
△ Less
Submitted 11 August, 2020;
originally announced August 2020.
-
Lifetime of sessile saliva droplets in the context of SARS-CoV-2
Authors:
Saravanan Balusamy,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
Spreading of respiratory diseases, such as COVID-19, from contaminated surfaces is dependent on the drying time of the deposited droplets containing the virus. The evaporation rate depends on environmental conditions, such as ambient temperature and relative humidity and physical properties (e.g., droplet volume, contact angle and composition). The respiratory droplets contain salt (NaCl), protein…
▽ More
Spreading of respiratory diseases, such as COVID-19, from contaminated surfaces is dependent on the drying time of the deposited droplets containing the virus. The evaporation rate depends on environmental conditions, such as ambient temperature and relative humidity and physical properties (e.g., droplet volume, contact angle and composition). The respiratory droplets contain salt (NaCl), protein (mucin), and surfactant (dipalmitoylphosphatidylcholine) in addition to water, which are expected to influence the evaporation in a big way. A diffusion-based theoretical model for estimating the drying time is developed which takes into account the dynamic contact angle of saliva droplets laden with salt and insoluble surfactants. The effect of the initial volume, contact angle, salinity, surfactant concentration, ambient temperature and relative humidity on the drying time of droplets is investigated.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
Evaporation of sessile ethanol-water droplets on a highly inclined heated surface
Authors:
Pallavi Katre,
Pradeep Gurrala,
Saravanan Balusam,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera and an infrared (IR) camera is used. The droplet is observed to remain pinned in the advancing side during the evaporation process, while the receding side contra…
▽ More
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera and an infrared (IR) camera is used. The droplet is observed to remain pinned in the advancing side during the evaporation process, while the receding side contracts. The asymmetry in the advancing and receding contact angles of the droplet on inclined substrate results in complex thermo-solutal Marangoni convection that is captured through IR images. The droplet exhibits two distinct oscillatory water-rich cold regions around the advancing contact line during the early stage of evaporation, while the more volatile and lighter ethanol creates a hotter and rapidly evaporating cell near the receding side. As ethanol evaporates away, the ethanol rich cells collapse producing thermal pulsations along the incline. Subsequently, the thermal patterns become similar to that of the pure-water droplet. It is also observed that the thermo-solutal driven oscillatory convection increases with increasing substrate temperature. Despite the complexity in convection dynamics, the evaporation rate exhibits a universal behavior in the normalized time at different substrate temperatures which can be represented by piecewise linear fits at the early and late stages of evaporation.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
Large flux-mediated coupling in hybrid electromechanical system with a transmon qubit
Authors:
Tanmoy Bera,
Sourav Majumder,
Sudhir Kumar Sahu,
Vibhor Singh
Abstract:
Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been q…
▽ More
Control over the quantum states of a massive oscillator is important for several technological applications and to test the fundamental limits of quantum mechanics. Addition of an internal degree of freedom to the oscillator could be a valuable resource for such control. Recently, hybrid electromechanical systems using superconducting qubits, based on electric-charge mediated coupling, have been quite successful. Here, we realize a hybrid device, consisting of a superconducting transmon qubit and a mechanical resonator coupled using the magnetic-flux. The coupling stems from the quantum-interference of the superconducting phase across the tunnel junctions. We demonstrate a vacuum electromechanical coupling rate up to 4 kHz by making the transmon qubit resonant with the readout cavity. Consequently, thermal-motion of the mechanical resonator is detected by driving the hybridized-mode with mean-occupancy well below one photon. By tuning qubit away from the cavity, electromechanical coupling can be enhanced to 40 kHz. In this limit, a small coherent drive on the mechanical resonator results in the splitting of qubit spectrum, and we observe interference signature arising from the Landau-Zener-Stückelberg effect. With improvements in qubit coherence, this system offers a novel platform to realize rich interactions and could potentially provide full control over the quantum motional states.
△ Less
Submitted 28 October, 2020; v1 submitted 16 January, 2020;
originally announced January 2020.
-
Machine Learning in Materials Modeling -- Fundamentals and the Opportunities in 2D Materials
Authors:
Shreeja Das,
Hansraj Pegu,
Kisor Sahu,
Ameeya Kumar Nayak,
Seeram Ramakrishna,
Dibakar Datta,
Soumya Swayamjyoti
Abstract:
The application of machine learning in materials presents a unique challenge of dealing with scarce and varied materials data - both experimental and theoretical. Nevertheless, several state-of-the-art machine learning models for materials have been successfully developed to predict material properties for various applications such as materials for photovoltaic cells, thermoelectric materials, die…
▽ More
The application of machine learning in materials presents a unique challenge of dealing with scarce and varied materials data - both experimental and theoretical. Nevertheless, several state-of-the-art machine learning models for materials have been successfully developed to predict material properties for various applications such as materials for photovoltaic cells, thermoelectric materials, dielectrics, materials for batteries, fuel cells, etc. The setup of comprehensive materials databases, and openly accessible algorithm frameworks have also spurred the usage of machine learning for solving some of the most pressing problems in materials science. Some such recent implementations are discussed in this book chapter. A multitude of two-dimensional (2D) materials exist with the potential to replace the conventional materials for energy storage and nanodevices. The challenges faced in designing batteries and how machine learning tools can help in screening and narrowing down on the best composition, as well as the synthesis of air-stable 2D materials, are also discussed.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Visual Machine Learning: Insight through Eigenvectors, Chladni patterns and community detection in 2D particulate structures
Authors:
Raj Kishore,
S. Swayamjyoti,
Shreeja Das,
Ajay K. Gogineni,
Zohar Nussinov,
D. Solenov,
Kisor K. Sahu
Abstract:
Machine learning (ML) is quickly emerging as a powerful tool with diverse applications across an extremely broad spectrum of disciplines and commercial endeavors. Typically, ML is used as a black box that provides little illuminating rationalization of its output. In the current work, we aim to better understand the generic intuition underlying unsupervised ML with a focus on physical systems. The…
▽ More
Machine learning (ML) is quickly emerging as a powerful tool with diverse applications across an extremely broad spectrum of disciplines and commercial endeavors. Typically, ML is used as a black box that provides little illuminating rationalization of its output. In the current work, we aim to better understand the generic intuition underlying unsupervised ML with a focus on physical systems. The systems that are studied here as test cases comprise of six different 2-dimensional (2-D) particulate systems of different complexities. It is noted that the findings of this study are generic to any unsupervised ML problem and are not restricted to materials systems alone. Three rudimentary unsupervised ML techniques are employed on the adjacency (connectivity) matrix of the six studied systems: (i) using principal eigenvalue and eigenvectors of the adjacency matrix, (ii) spectral decomposition, and (iii) a Potts model based community detection technique in which a modularity function is maximized. We demonstrate that, while solving a completely classical problem, ML technique produces features that are distinctly connected to quantum mechanical solutions. Dissecting these features help us to understand the deep connection between the classical non-linear world and the quantum mechanical linear world through the kaleidoscope of ML technique, which might have far reaching consequences both in the arena of physical sciences and ML.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Elastic properties of few unit cell thick superconducting crystals of Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$
Authors:
Sudhir Kumar Sahu,
Digambar Jangade,
Arumugam Thamizhavel,
Mandar M. Deshmukh,
Vibhor Singh
Abstract:
We present systematic measurements of the mechanical properties of few unit cell (UC) thick exfoliated crystals of a high-T$_c$ cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$. We determine the elastic properties of these crystals by deformation using an atomic force microscope (AFM) at room temperature. With the spatial measurements of local compliance and their detailed modeling, we indepen…
▽ More
We present systematic measurements of the mechanical properties of few unit cell (UC) thick exfoliated crystals of a high-T$_c$ cuprate superconductor Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$. We determine the elastic properties of these crystals by deformation using an atomic force microscope (AFM) at room temperature. With the spatial measurements of local compliance and their detailed modeling, we independently determine the Young's modulus of rigidity and the pre-stress. The Young's modulus of rigidity is found to be in the range of 22 GPa to 30 GPa for flakes with thickness from 5 UC to 18 UC. The pre-stress spreads over the range of 5 MPa - 46 MPa, indicating a run-to-run variation during the exfoliation process. The determination of Young's modulus of rigidity for thin flakes is further verified from recently reported buckling technique.
△ Less
Submitted 5 October, 2019;
originally announced October 2019.
-
Omnidirectional transport and navigation of Janus particles through a nematic liquid crystal film
Authors:
Dinesh Kumar Sahu,
Swapnil Kole,
Sriram Ramaswamy,
Surajit Dhara
Abstract:
We create controllable active particles in the form of metal-dielectric Janus colloids which acquire motility through a nematic liquid crystal film by transducing the energy of an imposed perpendicular AC electric field. We achieve complete command over trajectories by varying field amplitude and frequency, piloting the colloids at will in the plane spanned by the axes of the particle and the nema…
▽ More
We create controllable active particles in the form of metal-dielectric Janus colloids which acquire motility through a nematic liquid crystal film by transducing the energy of an imposed perpendicular AC electric field. We achieve complete command over trajectories by varying field amplitude and frequency, piloting the colloids at will in the plane spanned by the axes of the particle and the nematic. The underlying mechanism exploits the sensitivity of electro-osmotic flow to the asymmetries of the particle surface and the liquid-crystal defect structure. We present a calculation of the dipolar force density produced by the interplay of the electric field with director anchoring and the contrasting electrostatic boundary conditions on the two hemispheres, that accounts for the dielectric-forward (metal-forward) motion of the colloids due to induced puller (pusher) force dipoles. These findings open unexplored directions for the use of colloids and liquid crystals in controlled transport, assembly and collective dynamics.
△ Less
Submitted 1 July, 2020; v1 submitted 29 August, 2019;
originally announced August 2019.
-
Evaporation of ethanol-water droplet at different substrate temperatures and compositions
Authors:
Pradeep Gurrala,
Pallavi Katre,
Saravanan Balusamy,
Sayak Banerjee,
Kirti Chandra Sahu
Abstract:
We experimentally investigate the evaporation dynamics of sessile droplets of a fixed volume consisting of different compositions of ethanol-water binary mixture at different substrate temperatures (T_s). At T_s=25oC, we observe pinned-stage linear evaporation for pure droplets, but a binary droplet undergoes two distinct evaporation stages: an early pinned stage and a later receding stage. In the…
▽ More
We experimentally investigate the evaporation dynamics of sessile droplets of a fixed volume consisting of different compositions of ethanol-water binary mixture at different substrate temperatures (T_s). At T_s=25oC, we observe pinned-stage linear evaporation for pure droplets, but a binary droplet undergoes two distinct evaporation stages: an early pinned stage and a later receding stage. In the binary droplet, the more volatile ethanol, evaporates faster leading to a nonlinear trend in the evaporation process at the early stage. The phenomenon observed in the present study at T_s=25oC is similar to that presented by previous researchers at room temperature. More interesting dynamics is observed in the evaporation process of a binary droplet at an elevated substrate temperature. We found that the lifetime of the droplet exhibits a non-monotonic trend with the increase in ethanol concentration in the binary mixture, which {can be attributed to} the non-ideal behaviour of water-ethanol binary mixtures. Increasing T_s decreases the lifetime of the (50\% ethanol + 50 \% water) binary droplet in a logarithmic scale. For this composition, at T_s=60oC, we observed an early spreading stage, an intermediate pinned stage and a late receding stage of evaporation. Unlike T_s=25oC, at the early times of the evaporation process, the contact angle of the droplet of pure water at T_s=60oC is greater than 90. Late stage interfacial instability and even droplet break-up are observed for some (though not all) binary mixture compositions. The evaporation dynamics for different compositions at T_s=60oC exhibit a self-similar trend. Finally, the evaporation rates of pure and binary droplets at different substrate temperatures are compared against a theoretical model developed for pure and binary mixture droplets.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
-
Nanoelectromechanical resonators from high-T$_c$ superconducting crystals of Bi$_2$Sr$_2$Ca$_1$Cu$_2$O$_{8+δ}$
Authors:
Sudhir Kumar Sahu,
Jaykumar Vaidya,
Felix Schmidt,
Digambar Jangade,
Arumugam Thamizhavel,
Gary Steele,
Mandar M. Deshmukh,
Vibhor Singh
Abstract:
In this report, we present nanoelectromechanical resonators fabricated with thin exfoliated crystals of a high-T$_c$ cuprate superconductor Bi$_2$Sr$_2$Ca$_1$Cu$_2$O$_{8+δ}$. The mechanical readout is performed by capacitively coupling their motion to a coplanar waveguide microwave cavity fabricated with a superconducting alloy of molybdenum-rhenium. We demonstrate mechanical frequency tunability…
▽ More
In this report, we present nanoelectromechanical resonators fabricated with thin exfoliated crystals of a high-T$_c$ cuprate superconductor Bi$_2$Sr$_2$Ca$_1$Cu$_2$O$_{8+δ}$. The mechanical readout is performed by capacitively coupling their motion to a coplanar waveguide microwave cavity fabricated with a superconducting alloy of molybdenum-rhenium. We demonstrate mechanical frequency tunability with external dc-bias voltage, and quality factors up to 36600. Our spectroscopic and time-domain measurements show that mechanical dissipation in these systems is limited by the contact resistance arising from resistive outer layers. The temperature dependence of dissipation indicates the presence of tunneling states, further suggesting that their intrinsic performance could be as good as other two-dimensional atomic crystals such as graphene.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
An optomechanical platform with a 3-dimensional waveguide cavity
Authors:
Bindu Gunupudi,
Soumya Ranjan Das,
Rohit Navarathna,
Sudhir Kumar Sahu,
Sourav Majumder,
Vibhor Singh
Abstract:
At low temperatures, microwave cavities are often preferred for the readout and control of a variety of systems. In this paper, we present design and measurements on an optomechanical device based on a 3-dimensional rectangular waveguide cavity. We show that by suitably modifying the electromagnetic field corresponding to the fundamental mode of the cavity, the equivalent circuit capacitance can b…
▽ More
At low temperatures, microwave cavities are often preferred for the readout and control of a variety of systems. In this paper, we present design and measurements on an optomechanical device based on a 3-dimensional rectangular waveguide cavity. We show that by suitably modifying the electromagnetic field corresponding to the fundamental mode of the cavity, the equivalent circuit capacitance can be reduced to 29 fF. By coupling a mechanical resonator to the modified electromagnetic mode of the cavity, we achieved a capacitance participation ratio of 43 $\%$. We demonstrate an optomechanical cooperativity, $C$$\sim$40, characterized by performing measurements in the optomechanically-induced absorption (OMIA) limit. In addition, due to a low-impedance environment between the two-halves of the cavity, our design has the flexibility of incorporating a DC bias across the mechanical resonator, often a desired feature in tunable optomechanical devices.
△ Less
Submitted 17 February, 2019;
originally announced February 2019.
-
Inference of hidden structures in complex physical systems by multi-scale clustering
Authors:
Z. Nussinov,
P. Ronhovde,
Dandan Hu,
S. Chakrabarty,
M. Sahu,
Bo Sun,
N. A. Mauro,
K. K. Sahu
Abstract:
We survey the application of a relatively new branch of statistical physics--"community detection"-- to data mining. In particular, we focus on the diagnosis of materials and automated image segmentation. Community detection describes the quest of partitioning a complex system involving many elements into optimally decoupled subsets or communities of such elements. We review a multiresolution vari…
▽ More
We survey the application of a relatively new branch of statistical physics--"community detection"-- to data mining. In particular, we focus on the diagnosis of materials and automated image segmentation. Community detection describes the quest of partitioning a complex system involving many elements into optimally decoupled subsets or communities of such elements. We review a multiresolution variant which is used to ascertain structures at different spatial and temporal scales. Significant patterns are obtained by examining the correlations between different independent solvers. Similar to other combinatorial optimization problems in the NP complexity class, community detection exhibits several phases. Typically, illuminating orders are revealed by choosing parameters that lead to extremal information theory correlations.
△ Less
Submitted 14 January, 2016; v1 submitted 5 March, 2015;
originally announced March 2015.
-
Detecting hidden spatial and spatio-temporal structures in glasses and complex physical systems by multiresolution network clustering
Authors:
P. Ronhovde,
S. Chakrabarty,
D. Hu,
M. Sahu,
K. F. Kelton,
N. A. Mauro,
K . K. Sahu,
Z. Nussinov
Abstract:
We elaborate on a general method that we recently introduced for characterizing the "natural" structures in complex physical systems via a multiscale network based approach for the data mining of such structures. The approach is based on "community detection" wherein interacting particles are partitioned into "an ideal gas" of optimally decoupled groups of particles. Specifically, we construct a s…
▽ More
We elaborate on a general method that we recently introduced for characterizing the "natural" structures in complex physical systems via a multiscale network based approach for the data mining of such structures. The approach is based on "community detection" wherein interacting particles are partitioned into "an ideal gas" of optimally decoupled groups of particles. Specifically, we construct a set of network representations ("replicas") of the physical system based on interatomic potentials and apply a multiscale clustering ("multiresolution community detection") analysis using information-based correlations among the replicas. Replicas may be (i) different representations of an identical static system or (ii) embody dynamics by when considering replicas to be time separated snapshots of the system (with a tunable time separation) or (iii) encode general correlations when different replicas correspond to different representations of the entire history of the system as it evolves in space-time. We apply our method to computer simulations of a binary Kob-Andersen Lennard-Jones system, a ternary model system, and to atomic coordinates in a ZrPt system as gleaned by reverse Monte Carlo analysis of experimentally determined structure factors. We identify the dominant structures (disjoint or overlapping) and general length scales by analyzing extrema of the information theory measures. We speculate on possible links between (i) physical transitions or crossovers and (ii) changes in structures found by this method as well as phase transitions associated with the computational complexity of the community detection problem. We briefly also consider continuum approaches and discuss the shear penetration depth in elastic media; this length scale increases as the system becomes increasingly rigid.
△ Less
Submitted 4 April, 2011; v1 submitted 8 February, 2011;
originally announced February 2011.
-
Detection of hidden structures on all scales in amorphous materials and complex physical systems: basic notions and applications to networks, lattice systems, and glasses
Authors:
P. Ronhovde,
S. Chakrabarty,
M. Sahu,
K. K. Sahu,
K. F. Kelton,
N. Mauro,
Z. Nussinov
Abstract:
Recent decades have seen the discovery of numerous complex materials. At the root of the complexity underlying many of these materials lies a large number of possible contending atomic- and larger-scale configurations and the intricate correlations between their constituents. For a detailed understanding, there is a need for tools that enable the detection of pertinent structures on all spatial an…
▽ More
Recent decades have seen the discovery of numerous complex materials. At the root of the complexity underlying many of these materials lies a large number of possible contending atomic- and larger-scale configurations and the intricate correlations between their constituents. For a detailed understanding, there is a need for tools that enable the detection of pertinent structures on all spatial and temporal scales. Towards this end, we suggest a new method by invoking ideas from network analysis and information theory. Our method efficiently identifies basic unit cells and topological defects in systems with low disorder and may analyze general amorphous structures to identify candidate natural structures where a clear definition of order is lacking. This general unbiased detection of physical structure does not require a guess as to which of the system properties should be deemed as important and may constitute a natural point of departure for further analysis. The method applies to both static and dynamic systems.
△ Less
Submitted 29 December, 2010;
originally announced January 2011.
-
Efficacy of surface error corrections to density functional theory calculations of vacancy formation energy in transition metals
Authors:
Prithwish Kumar Nandi,
M. C. Valsakumar,
Sharat Chandra,
H. K. Sahu,
C. S. Sundar
Abstract:
We calculate properties like equilibrium lattice parameter, bulk modulus and monovacancy formation energy for nickel (Ni), iron (Fe) and chromium (Cr) using Kohn-Sham density functional theory (DFT). We compare relative performance of local density approximation (LDA) and generalized gradient approximation (GGA) for predicting such physical properties for these metals. We also make a relative stud…
▽ More
We calculate properties like equilibrium lattice parameter, bulk modulus and monovacancy formation energy for nickel (Ni), iron (Fe) and chromium (Cr) using Kohn-Sham density functional theory (DFT). We compare relative performance of local density approximation (LDA) and generalized gradient approximation (GGA) for predicting such physical properties for these metals. We also make a relative study between two different flavors of GGA exchange correlation functional, namely, PW91 and PBE. These calculations show that there is a discrepancy between DFT calculations and experimental data. In order to understand this discrepancy in the calculation of vacancy formation energy, we introduce a correction for the surface intrinsic error corresponding to an exchange correlation functional using the scheme implemented by Mattsson et al. [Phys. Rev. B 73, 195123 (2006)] and compare the effectiveness of the correction scheme for Al and the 3d-transition metals.
△ Less
Submitted 14 September, 2011; v1 submitted 24 April, 2009;
originally announced April 2009.
-
To study the effects of degradation of phonon distribution on the high frequency response in nano structures
Authors:
S. -K. Sarkar,
Souvik Sarkar,
P. K. Sahu,
K. -S. Kumar,
S. Rani
Abstract:
Under hot electron condition, the hot carriers phonon excited by ultra-short pulses in polar semiconductors initially loose energy rapidly by emitting longitudinal optic phonons via dominant Frolic coupling. Thus, energy supplied to the carriers by high electric fields goes into phonon generation. As the phonon life time is long enough, phonon distribution is disturbed and a non equilibrium popu…
▽ More
Under hot electron condition, the hot carriers phonon excited by ultra-short pulses in polar semiconductors initially loose energy rapidly by emitting longitudinal optic phonons via dominant Frolic coupling. Thus, energy supplied to the carriers by high electric fields goes into phonon generation. As the phonon life time is long enough, phonon distribution is disturbed and a non equilibrium population of LO phonons or hot phonons are produced, leading to their re-absorption by the carriers. In the present work the high frequency performance of GaN nanostructures is studied in the framework of heated drifted Fermi-Dirac distribution function incorporating the relevant scattering mechanisms and the influence of non-equilibrium LO phonons. It is observed that degradation of phonon distribution enhances significantly 3-dB cut off frequency thereby makes the high frequency response flatter reflecting that high frequency response is better if effects of non-equilibrium phonon distributions are included in the calculations.
△ Less
Submitted 10 August, 2007;
originally announced August 2007.
-
Rietveld refinement and electron density distribution in CuxV2O5
Authors:
R. Nithya,
Sharat Chandra,
G. L. N. Reddy,
H. K. Sahu,
V. Sankara Sastry
Abstract:
Room temperature powder x-ray diffraction measurements have been carried out on polycrystalline samples of CuxV2O5 with x = 0.33, 0.40, 0.50, 0.55 and 0.60, prepared by solid state reaction in evacuated quartz tubes. All the samples were found to be in single-phase monoclinic structure. Rietveld full profile refinement of the x-ray diffraction data yielded the lattice parameters and fractional a…
▽ More
Room temperature powder x-ray diffraction measurements have been carried out on polycrystalline samples of CuxV2O5 with x = 0.33, 0.40, 0.50, 0.55 and 0.60, prepared by solid state reaction in evacuated quartz tubes. All the samples were found to be in single-phase monoclinic structure. Rietveld full profile refinement of the x-ray diffraction data yielded the lattice parameters and fractional atom coordinates. Maximum entropy inversion of the diffraction data was done in order to obtain the variation in the spatial electron density distribution as a function of copper composition. These density maps show progressive positional and charge disorders in the V-O network induced by addition of copper. It is shown that the electrons donated by copper atoms are transferred to the specific vanadium atom sites.
△ Less
Submitted 4 August, 2004;
originally announced August 2004.
