-
Defects in the $β$-Ga$_2$O$_3$($\bar201$)/HfO$_2$ MOS system and the effect of thermal treatments
Authors:
Khushabu. S. Agrawal,
Paolo LaTorraca,
Jonas Valentijn,
Roberta Hawkins,
Adam A. Gruszecki,
Joy Roy,
Vasily Lebedev,
Lewys Jones,
Robert M. Wallace,
Chadwin D. Young,
Paul K. Hurley,
Karim Cherkaoui
Abstract:
We have investigated the properties of the $β$-Ga$_2$O$_3$($\bar201$)/HfO$_2$/Cr/Au MOS (metal-oxide-semiconductor) system after annealing (450$^\circ$C) in different ambient conditions (forming gas, N$_2$ and O$_2$). Defect properties have been analyzed using an approach combining experimental impedance measurements with physics-based simulations of the capacitance-voltage (C-V) and conductance-v…
▽ More
We have investigated the properties of the $β$-Ga$_2$O$_3$($\bar201$)/HfO$_2$/Cr/Au MOS (metal-oxide-semiconductor) system after annealing (450$^\circ$C) in different ambient conditions (forming gas, N$_2$ and O$_2$). Defect properties have been analyzed using an approach combining experimental impedance measurements with physics-based simulations of the capacitance-voltage (C-V) and conductance-voltage (G-V) characteristics of $β$-Ga$_2$O$_3$/HfO$_2$ MOS capacitors. This approach enabled us to detect two defect bands in HfO$_2$ characterized by thermal ionization energies of ~1.1eV (acceptor-like) and ~2eV (donor-like) attributed to a polaronic self-trapping state and an oxygen vacancy in HfO$_2$, respectively. This study demonstrates how thermal treatments affect the energy distributions and densities of the observed defects. The adopted methodology also enabled the extraction of the spatial distribution of defects across the HfO$_2$ thickness and Cr/HfO$_2$ interface. The high concentration of oxygen vacancies close to the Cr/HfO$_2$ interface extracted from experimental and simulated electrical data is confirmed by in-situ XPS analysis which shows how Cr is scavenging oxygen from the HfO$_2$ and creating the donor band confined near the Cr/HfO$_2$ interface. This donor band density is observed to be reduced after annealing as per simulation and unchanged for different annealing conditions. We speculate this may be due to the formation of dense films and polyforms of HfO$_2$ under different ambient as revealed by high-resolution TEM images.
△ Less
Submitted 24 February, 2025;
originally announced February 2025.
-
Intrinsic Cluster-Shaped Density Waves in Cellular Dynamical Mean-Field Theory
Authors:
S. Verret,
J. Roy,
A. Foley,
M. Charlebois,
D. Sénéchal,
A. -M. S. Tremblay
Abstract:
It is well known that cellular dynamical mean-field theory (CDMFT) leads to the artificial breaking of translation invariance. In spite of this, it is one of the most successful methods to treat strongly correlated electrons systems. Here, we investigate in more detail how this broken translation invariance manifests itself. This allows to disentangle artificial broken translation invariance effec…
▽ More
It is well known that cellular dynamical mean-field theory (CDMFT) leads to the artificial breaking of translation invariance. In spite of this, it is one of the most successful methods to treat strongly correlated electrons systems. Here, we investigate in more detail how this broken translation invariance manifests itself. This allows to disentangle artificial broken translation invariance effects from the genuine strongly correlated effects captured by CDMFT. We report artificial density waves taking the shape of the cluster---cluster density waves---in all our zero temperature CDMFT solutions, including pair density waves in the superconducting state. We discuss the limitations of periodization regarding this phenomenon, and we present mean-field density-wave models that reproduce CDMFT results at low energy in the superconducting state. We then discuss how these artificial density waves help the agreement of CDMFT with high temperature superconducting cuprates regarding the low-energy spectrum, in particular for subgap structures observed in tunnelling microscopy. We relate these subgap structures to nodal and anti-nodal gaps in our results, similar to those observed in photoemission experiments. This fortuitous agreement suggests that spatial inhomogeneity may be a key ingredient to explain some features of the low-energy underdoped spectrum of cuprates with strongly correlated methods. This work deepens our understanding of CDMFT and clearly identifies signatures of broken translation invariance in the presence of strong correlations.
△ Less
Submitted 5 December, 2019; v1 submitted 22 September, 2019;
originally announced September 2019.
-
Strain distribution and thermal strain relaxation in MOVPE grown hBN films on sapphire substrates
Authors:
Kousik Bera,
D. Chugh,
Atanu Patra,
H. Hoe Tan,
C. Jagadish Anushree Roy
Abstract:
Recently, hexagonal boron nitride (hBN) layers have generated a lot of interest as ideal substrates for 2D stacked devices. Sapphire-supported thin hBN films of different thicknesses are grown using metalorganic vapour phase epitaxy technique by following a flow modulation scheme. Though these films of relatively large size are potential candidates to be employed in designing real devices, they ex…
▽ More
Recently, hexagonal boron nitride (hBN) layers have generated a lot of interest as ideal substrates for 2D stacked devices. Sapphire-supported thin hBN films of different thicknesses are grown using metalorganic vapour phase epitaxy technique by following a flow modulation scheme. Though these films of relatively large size are potential candidates to be employed in designing real devices, they exhibit wrinkling. The formation of wrinkles is a key signature of strain distribution in a film. Raman imaging has been utilized to study the residual strain distribution in these wrinkled hBN films. An increase in the overall compressive strain in the films with an increase in the layer thickness has been observed. To find whether the residual lattice strain in the films can be removed by a thermal treatment, temperature dependent Raman measurements of these films are carried out. The study demonstrates that the thermal rate of strain evolution is higher in the films of lower thickness than in the thicker films. This observation further provides a possible explanation for the variation of strain in the as-grown films. An empirical relation has been proposed for estimating the residual strain from the morphology of the films. We have also shown that the residual strain can be partially released by the delamination of the films.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Efficient heating of single-molecule junctions for thermoelectric studies at cryogenic temperatures
Authors:
Pascal Gehring,
Martijn van der Star,
Charalambos Evangeli,
Jennifer J. Le Roy,
Lapo Bogani,
Oleg V. Kolosov,
Herre S. J. van der Zant
Abstract:
The energy dependent thermoelectric response of a single molecule contains valuable information about its transmission function and its excited states. However, measuring it requires devices that can efficiently heat up one side of the molecule while being able to tune its electrochemical potential over a wide energy range. Furthermore, to increase junction stability devices need to operate at cry…
▽ More
The energy dependent thermoelectric response of a single molecule contains valuable information about its transmission function and its excited states. However, measuring it requires devices that can efficiently heat up one side of the molecule while being able to tune its electrochemical potential over a wide energy range. Furthermore, to increase junction stability devices need to operate at cryogenic temperatures. In this work we report on a new device architecture to study the thermoelectric properties and the conductance of single molecules simultaneously over a wide energy range. We employ a sample heater in direct contact with the metallic electrodes contacting the single molecule which allows us to apply temperature biases up to $ΔT = 60$K with minimal heating of the molecular junction. This makes these devices compatible with base temperatures $T_\mathrm{bath} <2$K and enables studies in the linear ($ΔT \ll T_\mathrm{molecule}$) and non-linear ($ΔT \gg T_\mathrm{molecule}$) thermoelectric transport regimes.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Strong coupling of microwave photons to antiferromagnetic fluctuations in an organic magnet
Authors:
M. Mergenthaler,
J. Liu,
J. J. Le Roy,
N. Ares,
A. L. Thompson,
L. Bogani,
F. Luis,
S. J. Blundell,
T. Lancaster,
A. Ardavan,
G. A. D. Briggs,
P. J. Leek,
E. A. Laird
Abstract:
Coupling between a crystal of di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium radicals and a superconducting microwave resonator is investigated in a circuit quantum electrodynamics (circuit QED) architecture. The crystal exhibits paramagnetic behavior above 4~K, with antiferromagnetic correlations appearing below this temperature, and we demonstrate strong coupling at base temperature. The magnetic…
▽ More
Coupling between a crystal of di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium radicals and a superconducting microwave resonator is investigated in a circuit quantum electrodynamics (circuit QED) architecture. The crystal exhibits paramagnetic behavior above 4~K, with antiferromagnetic correlations appearing below this temperature, and we demonstrate strong coupling at base temperature. The magnetic resonance acquires a field angle dependence as the crystal is cooled down, indicating anisotropy of the exchange interactions. These results show that multispin modes in organic crystals are suitable for circuit QED, offering a platform for their coherent manipulation. They also utilize the circuit QED architecture as a way to probe spin correlations at low temperature.
△ Less
Submitted 9 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Analysis and modelling of a rotary forming process for cast aluminum alloy A356
Authors:
M. J. Roy,
D. M. Maijer
Abstract:
Spinning of a common aluminum automotive casting alloy A356 (Al-7Si-0.3 Mg) at elevated temperatures has been investigated experimentally with a novel industrial-scale apparatus. This has permitted the implementation of a fully coupled thermomechanical finite element model aimed at quantifying the processing history (stress, strain, strain-rate and temperature) and predicting the final geometry. T…
▽ More
Spinning of a common aluminum automotive casting alloy A356 (Al-7Si-0.3 Mg) at elevated temperatures has been investigated experimentally with a novel industrial-scale apparatus. This has permitted the implementation of a fully coupled thermomechanical finite element model aimed at quantifying the processing history (stress, strain, strain-rate and temperature) and predicting the final geometry. The geometric predictions of this model have been compared directly to the geometry of the workpieces obtained experimentally. This study is novel in regards to both the size and shape of the component as well as the constitutive material representation employed. The model predictions are in reasonable agreement with experimental results for small deformations, but errors increase for large deformation conditions. The model has also enabled the characterization of the mechanical state which leads to a common spinning defect. Suggestions for improving the accuracy and robustness of the model to provide a predictive tool for industry are discussed.
△ Less
Submitted 24 July, 2015;
originally announced July 2015.
-
Magnetic field dependent interactions in an ultracold Li-Yb($^3$P$_2$) mixture
Authors:
William Dowd,
Richard J. Roy,
Rajendra K. Shrestha,
Alexander Petrov,
Constantinos Makrides,
Svetlana Kotochigova,
Subhadeep Gupta
Abstract:
Magnetic Feshbach resonances have allowed great success in the production of ultracold diatomic molecules from bi-alkali mixtures, but have so far eluded observation in mixtures of alkali and alkaline-earth-like atoms. Inelastic collisional properties of ultracold atomic systems exhibit resonant behavior in the vicinity of such resonances, providing a detection signature. We study magnetic field d…
▽ More
Magnetic Feshbach resonances have allowed great success in the production of ultracold diatomic molecules from bi-alkali mixtures, but have so far eluded observation in mixtures of alkali and alkaline-earth-like atoms. Inelastic collisional properties of ultracold atomic systems exhibit resonant behavior in the vicinity of such resonances, providing a detection signature. We study magnetic field dependent inelastic effects via atom loss spectroscopy in an ultracold heteronuclear mixture of alkali $^6$Li in the ground state and alkaline-earth-like $^{174}$Yb in an excited electronic metastable state ($^3$P$_2$, m$_J$ = -1). We observe a variation of the interspecies inelastic two-body rate coefficient by nearly one order of magnitude over a 100-520G magnetic field range. By comparing to ab-initio calculations we link our observations to interspecies Feshbach resonances arising from anisotropic interactions in this novel collisional system.
△ Less
Submitted 7 May, 2015; v1 submitted 17 December, 2014;
originally announced December 2014.
-
Stochastic dynamics of two-step processes with harmonic potential
Authors:
Jyotipriya Roy,
Chitrak Bhadra,
Debapriya Das,
Dhruba Banerjee,
Deb Shankar Ray
Abstract:
In this paper we address the one-dimensional problem of stochastic renewal in different damping environments. An ensemble of particles with some specified initial distribution in phase space are allowed to evolve stochastically till a certain instant of time (say,$tau$), when a restoring force is applied to bring them back to some point in configuration space. The physical quantities of interest t…
▽ More
In this paper we address the one-dimensional problem of stochastic renewal in different damping environments. An ensemble of particles with some specified initial distribution in phase space are allowed to evolve stochastically till a certain instant of time (say,$tau$), when a restoring force is applied to bring them back to some point in configuration space. The physical quantities of interest that have been studied are the Survival Probability and the First Passage distribution for return to the specified target point. We observe nontrivial dependence of these quantities on $tau$ as well as on the width of the initial distribution, which has been taken to be Gaussian in position and velocity.
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
-
Global empirical potentials from purely rotational measurements
Authors:
Nikesh S. Dattani,
Lindsay N. Zack,
Ming Sun,
Erin R. Johnson,
Robert J. Le Roy,
Lucy M. Ziurys
Abstract:
The recent advent of chirped-pulse FTMW technology has created a plethora of pure rotational spectra for molecules for which no vibrational information is known. The growing number of such spectra demands a way to build empirical potential energy surfaces for molecules, without relying on any vibrational measurements. Using ZnO as an example, we demonstrate a powerful technique for efficiently acc…
▽ More
The recent advent of chirped-pulse FTMW technology has created a plethora of pure rotational spectra for molecules for which no vibrational information is known. The growing number of such spectra demands a way to build empirical potential energy surfaces for molecules, without relying on any vibrational measurements. Using ZnO as an example, we demonstrate a powerful technique for efficiently accomplishing this. We first measure eight new ultra-high precision ($\pm2$ kHz) pure rotational transitions in the $X$-state of ZnO. Combining them with previous high-precision ($\pm50$ kHz) pure rotational measurements of different transitions in the same system, we have data that spans the bottom 10\% of the well. Despite not using any vibrational information, our empirical potentials are able to determine the size of the vibrational spacings and bond lengths, with precisions that are more than three and two orders of magnitude greater, respectively, than the most precise empirical values previously known, and the most accurate \emph{ab initio} calculations in today's reach. By calculating the $C_{6},$ $C_{8},$ and $C_{10}$ long-range constants and using them to anchor the top of the well, our potential is \emph{globally} in excellent agreement with \emph{ab initio} calculations, without the need for vibrational spectra and without the need for \emph{any} data in the top 90\% of the well.
△ Less
Submitted 10 August, 2014;
originally announced August 2014.
-
Response of A356 to warm rotary forming and subsequent T6 heat treatment
Authors:
M. J. Roy,
D. M. Maijer
Abstract:
The through-process microstructural effects in A356 subjected to rotary forming at elevated temperatures have been investigated. Macro and micro-hardness testing have been used extensively to track changes in the material from the as-cast state to as-formed, and T6 heat treated. Targeted thermal treatments have been used to isolate the effects of mechanical deformation through comparative measurem…
▽ More
The through-process microstructural effects in A356 subjected to rotary forming at elevated temperatures have been investigated. Macro and micro-hardness testing have been used extensively to track changes in the material from the as-cast state to as-formed, and T6 heat treated. Targeted thermal treatments have been used to isolate the effects of mechanical deformation through comparative measurements. These measurements include macro and micro hardness measurements, Energy-dispersive X-ray analysis and examination of eutectic-Si particle size and morphology. The results indicate that the as-cast material is stable up to approximately 144°C, with the rotary formed material exhibiting decreased macrohardness in-line with the time spent at elevated temperature. Post heat treatment, there was a significant decrease in hardness with increased levels of deformation. Results indicate that precipitation hardening is not appreciably affected by rotary forming, and the principal cause for the drop in hardness with deformation is due to the condition of Al-Si eutectic phase.
△ Less
Submitted 20 June, 2014;
originally announced June 2014.
-
Multiaxial Fatigue Behaviour of A356-T6
Authors:
M. J. Roy,
Y. Nadot,
D. M. Maijer,
G. Benoit
Abstract:
Aluminum alloy A356-T6 was subjected to fully reversed cyclic loading under tension, torsion and combined loading. Results indicate that endurance limits are governed by maximum principal stress. Fractography demonstrates long shear mode III propagation with multiple initiation sites under torsion. Under other loadings, fracture surfaces show unique initiation sites coincidental to defects and mod…
▽ More
Aluminum alloy A356-T6 was subjected to fully reversed cyclic loading under tension, torsion and combined loading. Results indicate that endurance limits are governed by maximum principal stress. Fractography demonstrates long shear mode III propagation with multiple initiation sites under torsion. Under other loadings, fracture surfaces show unique initiation sites coincidental to defects and mode I crack propagation. Using the replica technique, it has been shown that the initiation life is negligible for fatigue lives close to 1E6 cycles for combined loading. The natural crack growth rate has also been shown to be comparable to long cracks in similar materials.
△ Less
Submitted 4 June, 2014;
originally announced June 2014.
-
Production of quantum degenerate mixtures of ytterbium and lithium with controllable inter-species overlap
Authors:
Anders H. Hansen,
Alexander Y. Khramov,
William H. Dowd,
Alan O. Jamison,
Benjamin Plotkin-Swing,
Richard J. Roy,
Subhadeep Gupta
Abstract:
Quantum degenerate mixtures of alkali and spin-singlet atoms form the starting point for studying few- and many-body physics of mass-imbalanced pairs as well as the production of paramagnetic polar molecules. We recently reported the achievement of dual-species quantum degeneracy of a mixture of lithium and ytterbium atoms. Here we present details of the key experimental steps for the all-optical…
▽ More
Quantum degenerate mixtures of alkali and spin-singlet atoms form the starting point for studying few- and many-body physics of mass-imbalanced pairs as well as the production of paramagnetic polar molecules. We recently reported the achievement of dual-species quantum degeneracy of a mixture of lithium and ytterbium atoms. Here we present details of the key experimental steps for the all-optical preparation of these mixtures. Further we demonstrate the use of the magnetic field gradient tool to compensate for the differential gravitational sag of the two species and control their spatial overlap.
△ Less
Submitted 21 January, 2013; v1 submitted 9 November, 2012;
originally announced November 2012.
-
Constitutive behavior of as-cast A356
Authors:
M. J. Roy,
D. M. Maijer,
L. Dancoine
Abstract:
The constitutive behavior of aluminum alloy A356 in the as-cast condition has been characterized using compression tests performed over a wide range of deformation temperatures (30-500°C) and strain rates (\approx0.1-10 /s). This work is intended to support the development of process models for a wide range of conditions including those relevant to casting, forging and machining. The flow stress b…
▽ More
The constitutive behavior of aluminum alloy A356 in the as-cast condition has been characterized using compression tests performed over a wide range of deformation temperatures (30-500°C) and strain rates (\approx0.1-10 /s). This work is intended to support the development of process models for a wide range of conditions including those relevant to casting, forging and machining. The flow stress behavior as a function of temperature and strain rate has been fit to a modified Johnson-Cook and extended Ludwik-Hollomon expression. The data has also been assessed with both the strain-independent Kocks-Mecking and Zener-Hollomon frameworks. The predicted plastic flow stress for each expression are compared. The results indicate that the extended Ludwik-Hollomon is best suited to describe small strain conditions (stage III hardening), while the Kocks-Mecking is best employed for large strain (stage IV). At elevated temperatures, it was found that the Zener-Hollomon model provides the best prediction of flow stress.
△ Less
Submitted 9 June, 2012;
originally announced June 2012.
-
Multiaxial Kitagawa analysis of A356-T6
Authors:
M. J. Roy,
Y. Nadot,
C. Nadot-Martin,
P. -G. Bardin,
D. M. Maijer
Abstract:
Experimental Kitagawa analysis has been performed on A356-T6 containing natural and artificial defects. Results are obtained with a load ratio of R = -1 for three different loadings: tension, torsion and combined tension-torsion. The critical defect size determined is 400 \pm 100 \mum in A356-T6 under multiaxial loading. Below this value, the microstructure governs the endurance limit mainly throu…
▽ More
Experimental Kitagawa analysis has been performed on A356-T6 containing natural and artificial defects. Results are obtained with a load ratio of R = -1 for three different loadings: tension, torsion and combined tension-torsion. The critical defect size determined is 400 \pm 100 \mum in A356-T6 under multiaxial loading. Below this value, the microstructure governs the endurance limit mainly through Secondary Dendrite Arm Spacing (SDAS). Four theoretical approaches are used to simulate the endurance limit characterized by a Kitagawa relationship are compared: Murakami relationships [Y Murakami, Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier, 2002.], defect-crack equivalency via Linear Elastic Fracture Mechanics (LEFM), the Critical Distance Method (CDM) proposed by Susmel and Taylor [L. Susmel, D. Taylor. Eng. Fract. Mech. 75 (2008) 15.] and the gradient approach proposed by Nadot [Y. Nadot, T. ~Billaudeau. Eng. Fract. Mech. 73 (2006) 1.]. It is shown that the CDM and gradient methods are accurate; however fatigue data for three loading conditions is necessary to allow accurate identification of an endurance limit.
△ Less
Submitted 9 June, 2012;
originally announced June 2012.
-
Evolution of Plastic Strain During a Flow Forming Process
Authors:
M. J. Roy,
R. J. Klassen,
J. T. Wood
Abstract:
The distribution of equivalent plastic strain through the thickness of several AISI 1020 steel plates formed under different conditions over a smooth cylindrical mandrel using a single-roller forward flow forming operation was studied by measuring the local micro-indentation hardness of the deformed material. The equivalent plastic strain was higher at the inner and outer surfaces and lowest at th…
▽ More
The distribution of equivalent plastic strain through the thickness of several AISI 1020 steel plates formed under different conditions over a smooth cylindrical mandrel using a single-roller forward flow forming operation was studied by measuring the local micro-indentation hardness of the deformed material. The equivalent plastic strain was higher at the inner and outer surfaces and lowest at the center of the workpiece. Empirical expressions are presented which describe the contribution of the roller and mandrel to the total local equivalent plastic strain within the flow formed part. The dependence of these expressions upon the thickness reduction during flow forming is discussed.
△ Less
Submitted 28 October, 2011;
originally announced October 2011.
-
Rapid Accurate Calculation of the s-Wave Scattering Length
Authors:
Vladimir V. Meshkov,
Andrey V. Stolyarov,
Robert J. Le Roy
Abstract:
Transformation of the conventional radial Schrödinger equation defined on the interval $\,r\in[0,\infty)$ into an equivalent form defined on the finite domain $\,y(r)\in [a,b]\,$ allows the s-wave scattering length $a_s$ to be exactly expressed in terms of a logarithmic derivative of the transformed wave function $φ(y)$ at the outer boundary point $y=b$, which corresponds to $r=\infty$. In particu…
▽ More
Transformation of the conventional radial Schrödinger equation defined on the interval $\,r\in[0,\infty)$ into an equivalent form defined on the finite domain $\,y(r)\in [a,b]\,$ allows the s-wave scattering length $a_s$ to be exactly expressed in terms of a logarithmic derivative of the transformed wave function $φ(y)$ at the outer boundary point $y=b$, which corresponds to $r=\infty$. In particular, for an arbitrary interaction potential that dies off as fast as $1/r^n$ for $n\geq 4$, the modified wave function $φ(y)$ obtained by using the two-parameter mapping function $r(y;\bar{r},β) = \bar{r}[1+\frac{1}β\tan(πy/2)]$ has no singularities, and $$a_s=\bar{r}[1+\frac{2}{πβ}\frac{1}{φ(1)}\frac{dφ(1)}{dy}].$$ For a well bound potential with equilibrium distance $r_e$, the optimal mapping parameters are $\,\bar{r}\approx r_e\,$ and $\,β\approx \frac{n}{2}-1$. An outward integration procedure based on Johnson's log-derivative algorithm [B.R.\ Johnson, J.\ Comp.\ Phys., \textbf{13}, 445 (1973)] combined with a Richardson extrapolation procedure is shown to readily yield high precision $a_s$-values both for model Lennard-Jones ($2n,n$) potentials and for realistic published potentials for the Xe--e$^-$, Cs$_2(a\,^3Σ_u^+$) and $^{3,4}$He$_2(X\,^1Σ_g^+)$ systems. Use of this same transformed Schr{ö}dinger equation was previously shown [V.V. Meshkov et al., Phys.\ Rev.\ A, {\bf 78}, 052510 (2008)] to ensure the efficient calculation of all bound levels supported by a potential, including those lying extremely close to dissociation.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
