-
Roughness of oxide glass subcritical fracture surfaces
Authors:
Gael Pallares,
Frederic Lechenault,
Matthieu George,
Elisabeth Bouchaud,
Cédric Ottina,
Cindy L. Rountree,
Matteo Ciccotti
Abstract:
An original setup combining a very stable loading stage, an atomic force microscope and an environmental chamber, allows to obtain very stable sub-critical fracture propagation in oxide glasses under controlled environment, and subsequently to finely characterize the nanometric roughness properties of the crack surfaces. The analysis of the surface roughness is conducted both in terms of the class…
▽ More
An original setup combining a very stable loading stage, an atomic force microscope and an environmental chamber, allows to obtain very stable sub-critical fracture propagation in oxide glasses under controlled environment, and subsequently to finely characterize the nanometric roughness properties of the crack surfaces. The analysis of the surface roughness is conducted both in terms of the classical root mean square roughness to compare with the literature, and in terms of more physically adequate indicators related to the self-affine nature of the fracture surfaces. Due to the comparable nanometric scale of the surface roughness, the AFM tip size and the instrumental noise, a special care is devoted to the statistical evaluation of the metrologic properties. The 2 roughness amplitude of several oxide glasses was shown to decrease as a function of the stress intensity factor, to be quite insensitive to the relative humidity and to increase with the degree of heterogeneity of the glass. The results are discussed in terms of several modeling arguments concerning the coupling between crack propagation, material's heterogeneity, crack tip plastic deformation and water diffusion at the crack tip. A synthetic new model is presented combining the predictions of a model by Wiederhorn et al. [1] on the effect of the material's heterogeneity on the crack tip stresses with the self-affine nature of the fracture surfaces.
△ Less
Submitted 14 November, 2017;
originally announced November 2017.
-
Fractoluminescence characterization of the energy dissipated during fast fracture of glass
Authors:
Gael Pallares,
Cindy L. Rountree,
Ludovic Douillard,
Fabrice Charra,
Elisabeth Bouchaud
Abstract:
Fractoluminescence experiments are performed on two kinds of silicate glasses. All the light spectra collected during dynamic fracture reveal a black body radiator behaviour, which is interpreted as a crack velocity-dependent temperature rise close to the crack tip. Crack velocities are estimated to be of the order of 1300 m.s$^{-1}$ and fracture process zones are shown to extend over a few nanome…
▽ More
Fractoluminescence experiments are performed on two kinds of silicate glasses. All the light spectra collected during dynamic fracture reveal a black body radiator behaviour, which is interpreted as a crack velocity-dependent temperature rise close to the crack tip. Crack velocities are estimated to be of the order of 1300 m.s$^{-1}$ and fracture process zones are shown to extend over a few nanometers.
△ Less
Submitted 30 June, 2012;
originally announced July 2012.
-
Evidence of deep water penetration in silica during stress corrosion fracture
Authors:
F. Lechenault,
C. L. Rountree,
F. Cousin,
J. -P. Bouchaud,
L. Ponson,
E. Bouchaud
Abstract:
We measure the thickness of the heavy water layer trapped under the stress corrosion fracture surface of silica using neutron reflectivity experiments. We show that the penetration depth is 65-85 ångströms, suggesting the presence of a damaged zone of $\approx$ 100 ångströms extending ahead of the crack tip during its propagation. This estimate of the size of the damaged zone is compatible with ot…
▽ More
We measure the thickness of the heavy water layer trapped under the stress corrosion fracture surface of silica using neutron reflectivity experiments. We show that the penetration depth is 65-85 ångströms, suggesting the presence of a damaged zone of $\approx$ 100 ångströms extending ahead of the crack tip during its propagation. This estimate of the size of the damaged zone is compatible with other recent results.
△ Less
Submitted 1 December, 2010;
originally announced December 2010.
-
Plasticity-induced structural anisotropy of silica glass
Authors:
Cindy Linn Rountree,
Damien Vandembroucq,
Mehdi Talamali,
Elisabeth Bouchaud,
Stéphane Roux
Abstract:
Amorphous silica density at ambient pressure is known to depend on thermal history (through the quenching rate) but also, at room temperature, on the maximum pressure applied in the past. Here we show that beyond density, a mechanical loading can endow the structure with an orientational order. Molecular dynamics simulations show evidence that amorphous silica develops a permanent anisotropic st…
▽ More
Amorphous silica density at ambient pressure is known to depend on thermal history (through the quenching rate) but also, at room temperature, on the maximum pressure applied in the past. Here we show that beyond density, a mechanical loading can endow the structure with an orientational order. Molecular dynamics simulations show evidence that amorphous silica develops a permanent anisotropic structure after extended shear plastic flow. This anisotropy which survives for an unstressed specimen is revealed markedly by the fabric tensor computed over the Si-O-Si orientations, albeit the SiO4 tetrahedra microstructure remains mostly unaltered.
△ Less
Submitted 14 May, 2009;
originally announced May 2009.
