Showing 1–11 of 11 results for author: Rosti, M E

Dense bidisperse suspensions under non-homogenous shear

Authors: Alessandro Monti, Marco Edoardo Rosti

Abstract: We study the rheological behaviour of bidisperse suspensions in three dimensions under a non-uniform shear flow, made by the superimposition of a linear shear and a sinusoidal disturbance. Our results show that i) only a streamwise disturbance in the shear-plane alters the suspension dynamics by substantially reducing the relative viscosity, ii) with the amplitude of the disturbance determining a… ▽ More We study the rheological behaviour of bidisperse suspensions in three dimensions under a non-uniform shear flow, made by the superimposition of a linear shear and a sinusoidal disturbance. Our results show that i) only a streamwise disturbance in the shear-plane alters the suspension dynamics by substantially reducing the relative viscosity, ii) with the amplitude of the disturbance determining a threshold value for the effect to kick-in and its wavenumber controlling the amount of reduction and which of the two phases is affected. We show that, iii) the rheological changes are caused by the effective separation of the two phases, with the large or small particles layering in separate regions. We provide a physical explanation of the phase separation process and of the conditions necessary to trigger it. We test the results in the whole flow curve, and we show that the mechanism remains substantially unaltered, with the only difference being the nature of the interactions between particles modified by the phase separation. △ Less

Submitted 8 October, 2023; v1 submitted 16 June, 2022; originally announced June 2022.

Journal ref: Sci Rep 13, 14310 (2023)

Shear-thickening of dense bidispersed suspensions

Authors: Alessandro Monti, Marco Edoardo Rosti

Abstract: We study the rheological behaviour of a dense bidispersed suspension varying the relative size of the two dispersed phases. The main outcome of our analysis is that an enhanced flowability (reduced relative viscosity) of the suspension can be achieved by increasing the dispersion ratio of the phases. We explain the observed result by showing that the presence of large particles increases the packi… ▽ More We study the rheological behaviour of a dense bidispersed suspension varying the relative size of the two dispersed phases. The main outcome of our analysis is that an enhanced flowability (reduced relative viscosity) of the suspension can be achieved by increasing the dispersion ratio of the phases. We explain the observed result by showing that the presence of large particles increases the packing efficiency of the suspension, leading to a reduction of the contribution of the contacts on the overall viscosity of the suspension in the shear-thickening regime, i.e. where the contacts are the dominating component. △ Less

Submitted 19 February, 2023; v1 submitted 13 June, 2022; originally announced June 2022.

Shear-thinning and shear-thickening emulsions in shear flows

Authors: Marco Edoardo Rosti, Shu Takagi

Abstract: We study the rheology of a two-fluid emulsion in semi-concentrated conditions; the solute is Newtonian while the solvent an inelastic power law fluid. The problem at hand is tackled by means of direct numerical simulations using the volume of fluid method. The analysis is performed for different volume fractions and viscosity ratios under the assumption of negligible inertia and zero buoyancy forc… ▽ More We study the rheology of a two-fluid emulsion in semi-concentrated conditions; the solute is Newtonian while the solvent an inelastic power law fluid. The problem at hand is tackled by means of direct numerical simulations using the volume of fluid method. The analysis is performed for different volume fractions and viscosity ratios under the assumption of negligible inertia and zero buoyancy force. Several carrier fluids are considered encompassing both the shear-thinning and thickening behaviors. We show that the effective viscosity of the system increases for shear-thickening fluids and decreases for the shear-thinning ones for all the viscosity ratios considered. The changes in the emulsion viscosity are mainly due to modifications of the coalescence in the system obtained by changing the carrier fluid property: indeed, local large and low shear rates are found in the regions between two interacting droplets for shear-thickening and thinning fluids, respectively, resulting in increased and reduced local viscosity which ultimately affects the drainage time of the system. This process is independent of the nominal viscosity ratio of the two fluids and we show that it can not be understood by considering only the mean shear rate and viscosity of the two fluids across the domain, but the full spectrum of shear rate must be taken into account. △ Less

Submitted 1 August, 2021; originally announced August 2021.

Suspensions of deformable particles in Poiseuille flows at finite inertia

Authors: Luigi Filippo Chiara, Marco Edoardo Rosti, Francesco Picano, Luca Brandt

Abstract: We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive… ▽ More We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive relation, and the flow is characterized by three main dimensionless parameters, namely the solid volume fraction, the Reynolds and capillary numbers. The dependency of the effective viscosity on these three quantities is investigated to study the inertial effects on a suspension of deformable particles. It can be observed that the suspension has a shear-thinning behavior, and the reduction in effective viscosity for high shear rates is emphasized in denser configurations. The separate analysis of the Reynolds and capillary numbers reveal that the effective viscosity depends more on the capillary than on the Reynolds number. In addition, our simulations exhibit a consistent tendency for deformable particles to move towards the center of the channel, where the shear rate is low. This phenomenon is particularly marked for very dilute suspensions, where a whole region near the wall is empty of particles. Furthermore, when the volume fraction is increased this near-wall region is gradually occupied, because of higher mutual particle interactions. Deformability also plays an important role in the process. Indeed, at high capillary numbers, particles are more sensitive to shear rate variations and can modify their shape more easily to accommodate a greater number of particles in the central region of the channel. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Fluid dynamics of COVID-19 airborne infection suggests urgent data for a scientific design of social distancing

Authors: M. E. Rosti, S. Olivieri, M. Cavaiola, A. Seminara, A. Mazzino

Abstract: The COVID-19 pandemic is largely caused by airborne transmission, a phenomenon that rapidly gained the attention of the scientific community. Social distancing is of paramount importance to limit the spread of the disease, but to design social distancing rules on a scientific basis the process of dispersal of virus-containing respiratory droplets must be understood. Here, we demonstrate that avail… ▽ More The COVID-19 pandemic is largely caused by airborne transmission, a phenomenon that rapidly gained the attention of the scientific community. Social distancing is of paramount importance to limit the spread of the disease, but to design social distancing rules on a scientific basis the process of dispersal of virus-containing respiratory droplets must be understood. Here, we demonstrate that available knowledge is largely inadequate to make predictions on the reach of infectious droplets emitted during a cough and on their infectious potential. We follow the position and evaporation of thousands of respiratory droplets by massive state-of-the-art numerical simulations of the airflow caused by a typical cough. We find that different initial distributions of droplet size taken from literature and different ambient relative humidity lead to opposite conclusions: (1) most vs none of the viral content settles in the first 1-2 m; (2) viruses are carried entirely on dry nuclei vs on liquid droplets; (3) small droplets travel less than 2.5m vs more than 7.5m. We point to two key issues that need to be addressed urgently in order to provide a scientific foundation to social distancing rules: (I1) a careful characterisation of the initial distribution of droplet sizes; (I2) the infectious potential of viruses carried on dry nuclei vs liquid droplets. △ Less

Submitted 16 December, 2020; v1 submitted 2 September, 2020; originally announced September 2020.

Turbulence dictates the fate of virus-containing droplets in violent expiratory events

Authors: Marco E. Rosti, Mattia Cavaiola, Stefano Olivieri, Agnese Seminara, Andrea Mazzino

Abstract: Violent expiratory events, such as coughing and sneezing, are highly nontrivial examples of a two-phase mixture of liquid droplets dispersed into an unsteady turbulent airflow. Understanding the physical mechanisms determining the dispersion and evaporation process of respiratory droplets has recently become a priority given the global emergency caused by the SARS-CoV-2 infection. By means of high… ▽ More Violent expiratory events, such as coughing and sneezing, are highly nontrivial examples of a two-phase mixture of liquid droplets dispersed into an unsteady turbulent airflow. Understanding the physical mechanisms determining the dispersion and evaporation process of respiratory droplets has recently become a priority given the global emergency caused by the SARS-CoV-2 infection. By means of high-resolution direct numerical simulations (DNS) of the expiratory airflow and a comprehensive Lagrangian model for the droplet dynamics, we identify the key role of turbulence on the fate of exhaled droplets. Due to the considerable spread in the initial droplet size, we show that the droplet evaporation time is controlled by the combined effect of turbulence and droplet inertia. This mechanism is clearly highlighted when comparing the DNS results with those obtained using coarse-grained descriptions that are employed in the majority of the current state-of-the-art investigations, resulting in errors up to $100\%$ when the turbulent fluctuations are filtered or completely averaged out. △ Less

Submitted 23 December, 2020; v1 submitted 12 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. Research 3, 013091 (2021)

Numerical simulations of a sphere settling in simple shear flows of yield stress fluids

Authors: Mohammad Sarabian, Marco E. Rosti, Luca Brandt, Sarah Hormozi

Abstract: We perform $3$D numerical simulations to investigate the sedimentation of a single sphere in the absence and presence of a simple cross shear flow in a yield stress fluid with weak inertia. In our simulations, the settling flow is considered to be the primary flow, whereas the linear cross shear flow is a secondary flow with amplitude $10\%$ of the primary flow. To study the effects of elasticity… ▽ More We perform $3$D numerical simulations to investigate the sedimentation of a single sphere in the absence and presence of a simple cross shear flow in a yield stress fluid with weak inertia. In our simulations, the settling flow is considered to be the primary flow, whereas the linear cross shear flow is a secondary flow with amplitude $10\%$ of the primary flow. To study the effects of elasticity and plasticity of the carrying fluid on the sphere drag as well as the flow dynamics, the fluid is modeled using the elastovisco-plastic (EVP) constitutive laws proposed by \cite{saramito2009new}. The extra non-Newtonian stress tensor is fully coupled with the flow equation and the solid particle is represented by an immersed boundary (IB) method. Our results show that the fore-aft asymmetry in the velocity is less pronounced and the negative wake disappears when a linear cross shear flow is applied. We find that the drag on a sphere settling in a sheared yield stress fluid is reduced significantly as compared to an otherwise quiescent fluid. More importantly, the sphere drag in the presence of a secondary cross shear flow cannot be derived from the pure sedimentation drag law owing to the non-linear coupling between the simple shear flow and the uniform flow. Finally, we show that the drag on the sphere settling in a sheared yield-stress fluid is reduced at higher material elasticity mainly due to the form and viscous drag reduction. △ Less

Submitted 17 May, 2020; originally announced May 2020.

Comments: 41 pages, 24 figures

On the effect of coalescence on the rheology of emulsions

Authors: Francesco De Vita, Marco Edoardo Rosti, Sergio Caserta, Luca Brandt

Abstract: We present a numerical study of the rheology of a two-fluid emulsion in dilute and semidilute conditions. The analysis is performed for different capillary numbers, volume fraction and viscosity ratio under the assumption of negligible inertia and zero buoyancy force. The effective viscosity of the system increases for low values of the volume fraction and decreases for higher values, with a maxim… ▽ More We present a numerical study of the rheology of a two-fluid emulsion in dilute and semidilute conditions. The analysis is performed for different capillary numbers, volume fraction and viscosity ratio under the assumption of negligible inertia and zero buoyancy force. The effective viscosity of the system increases for low values of the volume fraction and decreases for higher values, with a maximum for about 20 % concentration of the disperse phase. When the dispersed fluid has lower viscosity, the normalised effective viscosity becomes smaller than 1 for high enough volume fractions. To single out the effect of droplet coalescence on the rheology of the emulsion we introduce an Eulerian force which prevents merging, effectively modelling the presence of surfactants in the system. When the coalescence is inhibited the effective viscosity is always greater than 1 and the curvature of the function representing the emulsion effective viscosity vs. the volume fraction becomes positive, resembling the behaviour of suspensions of deformable particles. The reduction of the effective viscosity in the presence of coalescence is associated to the reduction of the total surface of the disperse phase when the droplets merge, which leads to a reduction of the interface tension contribution to the total shear stress. The probability density function of the flow topology parameter shows that the flow is mostly a shear flow in the matrix phase, with regions of extensional flow when the coalescence is prohibited. The flow in the disperse phase, instead, always shows rotational components. The first normal stress difference is positive whereas the second normal difference is negative, with their ratio being constant with the volume fraction. Our results clearly show that the coalescence efficiency strongly affects the system rheology and neglecting droplet merging can lead to erroneous predictions. △ Less

Submitted 22 August, 2019; originally announced August 2019.

Journal ref: J. Fluid Mech. 880 (2019) 969-991

The effect of elastic walls on suspension flow

Authors: Marco Edoardo Rosti, Mehdi Niazi Ardekani, Luca Brandt

Abstract: We study suspensions of rigid particles in a plane Couette flow with deformable elastic walls. We find that, in the limit of vanishing inertia, the elastic walls induce shear thinning of the suspension flow such that the effective viscosity decreases as the wall deformability increases. This shear-thinning behavior originates from the interactions between rigid particles, soft wall and carrier flu… ▽ More We study suspensions of rigid particles in a plane Couette flow with deformable elastic walls. We find that, in the limit of vanishing inertia, the elastic walls induce shear thinning of the suspension flow such that the effective viscosity decreases as the wall deformability increases. This shear-thinning behavior originates from the interactions between rigid particles, soft wall and carrier fluid; an asymmetric wall deformation induces a net lift force acting on the particles which therefore migrate towards the bulk of the channel. Based on our observations, we provide a closure for the suspension viscosity which can be used to model the rheology of suspensions with arbitrary volume fraction in elastic channels. △ Less

Submitted 11 June, 2019; originally announced June 2019.

Numerical study of filament suspensions at finite inertia

Authors: Arash Alizad Banaei, Marco Edoardo Rosti, Luca Brandt

Abstract: We present a numerical study on the rheology of semi-dilute and concentrated filament suspensions of different bending stiffness and Reynolds number, with the immersed boundary method used to couple the fluid and solid. The filaments are considered as one-dimensional inextensible slender bodies with fixed aspect ratio, obeying the Euler-Bernoulli beam equation. To understand the global suspension… ▽ More We present a numerical study on the rheology of semi-dilute and concentrated filament suspensions of different bending stiffness and Reynolds number, with the immersed boundary method used to couple the fluid and solid. The filaments are considered as one-dimensional inextensible slender bodies with fixed aspect ratio, obeying the Euler-Bernoulli beam equation. To understand the global suspension behavior we relate it to the filament microstructure, deformation and elastic energy and examine the stress budget to quantify the effect of the elastic contribution. At fixed volume fraction, the viscosity of the suspension reduces when decreasing the bending rigidity and grows when increasing the Reynolds number. The change in the relative viscosity is stronger at finite inertia, although still in the laminar flow regime as considered here. Moreover, we find the first normal stress difference to be positive as in polymeric fluids, and to increase with the Reynolds number; its value has a peak for an intermediate value of the filament bending stiffness. The peak value is found to be proportional to the Reynolds number, moving towards more rigid suspensions at larger inertia. Moreover, the viscosity increases when increasing the filament volume fraction, and the rate of increase of the filament stress with the bending rigidity is stronger at higher Reynolds numbers and reduces with the volume fraction. We show that this behaviour is associated with the formation of a more ordered structure in the flow, where filaments tend to be more aligned and move as a compact aggregate, thus reducing the filament-filament interactions despite their volume fraction increases. △ Less

Submitted 24 September, 2019; v1 submitted 28 March, 2019; originally announced March 2019.

Comments: 26 pages, 20 figures

Journal ref: J. Fluid Mech. 882 (2020) A5

Numerical Simulations of Vorticity Banding of Emulsions in Shear Flows

Authors: Francesco De Vita, Marco Edoardo Rosti, Sergio Caserta, Luca Brandt

Abstract: Multiphase shear flows often show banded structures that affect the global behavior of complex fluids e.g. in microdevices. Here we investigate numerically the banding of emulsions, i.e. the formation of regions of high and low volume fraction, alternated in the vorticity direction and aligned with the flow (shear bands). These bands are associated with a decrease of the effective viscosity of the… ▽ More Multiphase shear flows often show banded structures that affect the global behavior of complex fluids e.g. in microdevices. Here we investigate numerically the banding of emulsions, i.e. the formation of regions of high and low volume fraction, alternated in the vorticity direction and aligned with the flow (shear bands). These bands are associated with a decrease of the effective viscosity of the system. To understand the mechanism of banding experimentally observed we have performed interface resolved simulations of the two-fluid system. The experiments were perfomed starting with a random distribution of droplets which, under the applied shear, evolves in time resulting in a phase separation. To numerically reproduce this process, the banded structures are initialized in a narrow channel confined by two walls moving in opposite direction. We find that the initial banded distribution is stable when droplets are free to merge and unstable when coalescence is prevented. In this case, additionally, the effective viscosity of the system increases, resembling the rheological behavior of suspensions of deformable particles. Droplets coalescence, on the other hand, allows emulsions to reduce the total surface of the system and hence the energy dissipation associated to the deformation, which in turn reduces the effective viscosity. △ Less

Submitted 29 April, 2020; v1 submitted 14 February, 2019; originally announced February 2019.