Showing 1–22 of 22 results for author: Ross, L

BARCODE: Biomaterial Activity Readouts to Categorize, Optimize, Design and Engineer for high throughput screening and characterization of dynamically restructuring soft materials

Authors: Qiaopeng Chen, Aditya Sriram, Ayan Das, Katarina Matic, Maya Hendija, Keegan Tonry, Jennifer L. Ross, Moumita Das, Ryan J. McGorty, Rae M. Robertson-Anderson, Megan T. Valentine

Abstract: Active, responsive, nonequilibrium materials, at the forefront of materials engineering, offer dynamical restructuring, mobility and other complex life-like properties. Yet, this enhanced functionality comes with significant amplification of the size and complexity of the datasets needed to characterize their properties, thereby challenging conventional approaches to analysis. To meet this need, w… ▽ More Active, responsive, nonequilibrium materials, at the forefront of materials engineering, offer dynamical restructuring, mobility and other complex life-like properties. Yet, this enhanced functionality comes with significant amplification of the size and complexity of the datasets needed to characterize their properties, thereby challenging conventional approaches to analysis. To meet this need, we present BARCODE (Biomaterial Activity Readouts to Categorize, Optimize, Design and Engineer), an open-access software that automates high throughput screening of microscopy video data to enable nonequilibrium material optimization and discovery. BARCODE produces a unique fingerprint or barcode of performance metrics that visually and quantitatively encodes dynamic material properties with minimal file size. Using three complementary material agnostic analysis branches, BARCODE significantly reduces data dimensionality and size, while providing rich, multiparametric outputs and rapid tractable characterization of activity and structure. We analyze a series of datasets of cytoskeleton networks and cell monolayers to demonstrate the ability of BARCODE to accelerate and streamline screening and analysis, reveal unexpected correlations and emergence, and enable broad non-expert data access, comparison, and sharing. △ Less

Submitted 30 January, 2025; originally announced January 2025.

Active and passive crosslinking of cytoskeleton scaffolds tune the effects of cell inclusions on composite structure

Authors: Katarina Matic, Nimisha Krishnan, Eric Frank, Michael Arellano, Aditya Sriram, Moumita Das, Megan T Valentine, Michael J Rust, Rae M Robertson-Anderson, Jennifer L. Ross

Abstract: Incorporating cells within active biomaterial scaffolds is a promising strategy to develop forefront materials that can autonomously sense, respond, and alter the scaffold in response to environmental cues or internal cell circuitry. Using dynamic biocompatible scaffolds that can self-alter their properties via crosslinking and motor-driven force-generation opens even greater avenues for actuation… ▽ More Incorporating cells within active biomaterial scaffolds is a promising strategy to develop forefront materials that can autonomously sense, respond, and alter the scaffold in response to environmental cues or internal cell circuitry. Using dynamic biocompatible scaffolds that can self-alter their properties via crosslinking and motor-driven force-generation opens even greater avenues for actuation and control. However, the design principles associated with engineering active scaffolds embedded with cells are not well established. To address this challenge, we design a dynamic scaffold material of bacteria cells embedded within a composite cytoskeletal network of actin and microtubules that can be passively or actively crosslinked by either biotin-streptavidin or multimeric kinesin motors. Using quantitative microscopy, we demonstrate the ability to embed cells of volume fractions 0.4 to 2% throughout the network without compromising the structural integrity of the network or inhibiting crosslinking or motor-driven dynamics. Our findings suggest that both passive and active crosslinking promote entrainment of cells within the network, while depletion interactions play a more important role in uncrosslinked networks. Moreover, we show that large-scale structures emerge with the addition of cell fractions as low as 0.4%, but these structures do not influence the microscale structural lengthscale of the materials. Our work highlights the potential of our composite biomaterial in designing autonomous materials controlled by cells, and provides a roadmap for effectively coupling cells to complex composite materials with an eye towards using cells as in situ factories to program material modifications. △ Less

Submitted 13 January, 2025; originally announced January 2025.

Kinesin-driven de-mixing of cytoskeleton composites drives emergent mechanical properties

Authors: Janet Sheung, Christopher Gunter, Katarina Matic, Mehrzad Sasanpour, Jennifer L. Ross, Parag Katira, Megan T. Valentine, Rae M. Robertson-Anderson

Abstract: The cytoskeleton is an active composite of filamentous proteins that dictates diverse mechanical properties and processes in eukaryotic cells by generating forces and autonomously restructuring itself. Enzymatic motors that act on the comprising filaments play key roles in this activity, driving spatiotemporally heterogeneous mechanical responses that are critical to cellular multifunctionality, b… ▽ More The cytoskeleton is an active composite of filamentous proteins that dictates diverse mechanical properties and processes in eukaryotic cells by generating forces and autonomously restructuring itself. Enzymatic motors that act on the comprising filaments play key roles in this activity, driving spatiotemporally heterogeneous mechanical responses that are critical to cellular multifunctionality, but also render mechanical characterization challenging. Here, we couple optical tweezers microrheology and fluorescence microscopy with simulations and mathematical modeling to robustly characterize the mechanics of active composites of actin filaments and microtubules restructured by kinesin motors. We discover that composites exhibit a rich ensemble of force response behaviors, elastic, yielding, and stiffening, with their propensity and properties tuned by motor concentration and strain rate. Moreover, intermediate kinesin concentrations elicit emergent mechanical stiffness and resistance while higher and lower concentrations exhibit softer, more viscous dissipation. We further show that composites transition from well-mixed interpenetrating double-networks of actin and microtubules to de-mixed states of microtubule-rich aggregates surrounded by relatively undisturbed actin phases. It is this de-mixing that leads to the emergent mechanical response, offering an alternate route that composites can leverage to achieve enhanced stiffness through coupling of structure and mechanics. △ Less

Submitted 13 January, 2025; originally announced January 2025.

Multi-Motor Cargo Navigation in Complex Cytoskeletal Networks

Authors: Mason Grieb, Nimisha Krishnan, Jennifer L. Ross

Abstract: The kinesin superfamily of motor proteins is a major driver of anterograde transport of vesicles and organelles within eukaryotic cells via microtubules. Numerous studies have elucidated the step-size, velocities, forces, and navigation ability of kinesins both in reconstituted systems and in live cells. Outside of cells, the kinesin-based transport is physically regulated and can be controlled by… ▽ More The kinesin superfamily of motor proteins is a major driver of anterograde transport of vesicles and organelles within eukaryotic cells via microtubules. Numerous studies have elucidated the step-size, velocities, forces, and navigation ability of kinesins both in reconstituted systems and in live cells. Outside of cells, the kinesin-based transport is physically regulated and can be controlled by obstacles or defects in the path, or the interaction between several motors on the same cargo. To explore the physical control parameters on kinesin-driven transport, we created complex microtubule networks in vitro to test how kinesin cargoes made from quantum dots with one to 10 kinesin motors attached are able to navigate the network. We find that many motors on the quantum dot significantly alter distance walked, time spent bound, the average speed, and the tortuosity of the cargo. We also find that the average mesh size of the microtubule network affects the end-to-end distance of the motion, the run time, average speed and tortuosity of cargoes. Thus, both motor number and network density are physical aspects that regulate where cargoes traverse in space and time. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Comments: 7 figures in main text, 1 figure in appendix, 13 tables in appendix

DNA transport is topologically sculpted by active microtubule dynamics

Authors: Dylan P. McCuskey, Raisa E. Achiriloaie, Claire Benjamin, Jemma Kushen, Isaac Blacklow, Omar Mnfy, Jennifer L. Ross, Rae M. Robertson-Anderson, Janet Y. Sheung

Abstract: The transport of macromolecules, such as DNA, through the cytoskeleton is critical to wide-ranging cellular processes from cytoplasmic streaming to transcription. The rigidity and steric hindrances imparted by the network of filaments comprising the cytoskeleton often leads to anomalous subdiffusion, while active processes such as motor-driven restructuring can induce athermal superdiffusion. Unde… ▽ More The transport of macromolecules, such as DNA, through the cytoskeleton is critical to wide-ranging cellular processes from cytoplasmic streaming to transcription. The rigidity and steric hindrances imparted by the network of filaments comprising the cytoskeleton often leads to anomalous subdiffusion, while active processes such as motor-driven restructuring can induce athermal superdiffusion. Understanding the interplay between these seemingly antagonistic contributions to intracellular dynamics remains a grand challenge. Here, we use single-molecule tracking to show that the transport of large linear and circular DNA through motor-driven microtubule networks can be non-gaussian and multi-modal, with the degree and spatiotemporal scales over which these features manifest depending non-trivially on the state of activity and DNA topology. For example, active network restructuring increases caging and non-Gaussian transport modes of linear DNA, while dampening these mechanisms for rings. We further discover that circular DNA molecules exhibit either markedly enhanced subdiffusion or superdiffusion compared to their linear counterparts, in the absence or presence of kinesin activity, indicative of microtubules threading circular DNA. This strong coupling leads to both stalling and directed transport, providing a direct route towards parsing distinct contributions to transport and determining the impact of coupling on the transport signatures. More generally, leveraging macromolecular topology as a route to programming molecular interactions and transport dynamics is an elegant yet largely overlooked mechanism that cells may exploit for intracellular trafficking, streaming, and compartmentalization. This mechanism could be harnessed for the design of self-regulating, sensing, and reconfigurable biomimetic matter. △ Less

Submitted 31 August, 2024; originally announced September 2024.

Comments: 26 pages, 5 Figures and 5 SI Figures

Efficient motion of 90^{\circ} domain walls in Mn_{2}Au via pure optical torques

Authors: Paul-Iulian Gavriloaea, Jackson L. Ross, Frank Freimuth, Yuriy Mokrousov, Richard F. L. Evans, Roy Chantrell, Oksana Chubykalo-Fesenko, Rubén M. Otxoa

Abstract: Discovering alternative ways to drive domain wall (DW) dynamics is crucial for advancing spintronic applications. Here we demonstrate via atomistic spin dynamics simulations that optical torques can efficiently drive 90^{\circ} DWs in the Mn2Au antiferromagnet but their spatial symmetry forbids the motion of 180^{\circ} walls. In the steady-state regime, the kinematics display special relativity s… ▽ More Discovering alternative ways to drive domain wall (DW) dynamics is crucial for advancing spintronic applications. Here we demonstrate via atomistic spin dynamics simulations that optical torques can efficiently drive 90^{\circ} DWs in the Mn2Au antiferromagnet but their spatial symmetry forbids the motion of 180^{\circ} walls. In the steady-state regime, the kinematics display special relativity signatures accessed for low laser intensities. At velocities higher than the magnonic limit, the DW enters a proliferation regime in which part of its relativistic energy is invested into the nucleation of novel magnetic textures. Our investigation contributes towards the fundamental understanding of opto-magnetic effects, supporting the development of next generation, all-optically controlled antiferromagnetic spintronics. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Antiferromagnetic Switching in Mn$_2$Au Using a Novel Laser Induced Optical Torque on Ultrafast Timescales

Authors: J. L. Ross, P-I. Gavriloaea, F. Freimuth, T. Adamantopoulos, Y. Mokrousov, R. F. L. Evans, R. Chantrell, R. M. Otxoa, O. Chubykalo-Fesenko

Abstract: Efficient manipulation of the Néel vector in antiferromagnets can be induced by generation of spin orbit (SOT) or spin-transfer (STT) torques. Here we predict another possibility for antiferromagnetic domain switching by using a non-zero staggered field induced from optical laser excitation. We present results on the atomistic scale dynamic simulations from the application of a novel laser induced… ▽ More Efficient manipulation of the Néel vector in antiferromagnets can be induced by generation of spin orbit (SOT) or spin-transfer (STT) torques. Here we predict another possibility for antiferromagnetic domain switching by using a non-zero staggered field induced from optical laser excitation. We present results on the atomistic scale dynamic simulations from the application of a novel laser induced torque using optical frequencies for all-optical switching (AOS) of the Néel vector in the antiferromagnet Mn$_2$Au. The driving mechanism takes advantage of the sizeable 'exchange enhancement' characteristic of antiferromagnets, allowing for small picosecond 90 and 180 degree precessional switching with laser fluences on the order of mJ/cm$^2$. The symmetry of these novel torques are highly dependent on the time-varying magnetisation direction, creating a sign change in the torque which greatly minimises the "over-shooting problem" common to SOT and STT. Lastly, we demonstrate the opportunity for this laser optical torque to deterministically switch single magnetic domains. △ Less

Submitted 16 November, 2023; v1 submitted 31 October, 2023; originally announced November 2023.

Comments: 7 pages, 7 figures; updated figures and text for clarity

Effects of Cytoskeletal Network Mesh Size on Cargo Transport

Authors: Nimisha Krishnan, Niranjan Sarpangala, Maria Gamez, Ajay Gopinathan, Jennifer L Ross

Abstract: Intracellular transport of cargoes in the cell is essential for the organization and functioning cells, especially those that are large and elongated. The cytoskeletal networks inside large cells can be highly complex, and this cytoskeletal organization can have impacts on the distance and trajectories of travel. Here, we experimentally created microtubule networks with varying mesh sizes and exam… ▽ More Intracellular transport of cargoes in the cell is essential for the organization and functioning cells, especially those that are large and elongated. The cytoskeletal networks inside large cells can be highly complex, and this cytoskeletal organization can have impacts on the distance and trajectories of travel. Here, we experimentally created microtubule networks with varying mesh sizes and examined the ability of kinesin-driven quantum dot cargoes to traverse the network. Using the experimental data, we deduced parameters for cargo detachment at intersections and away from intersections, allowing us to create an analytical theory for the run length as a function of mesh size. We also used these parameters to perform simulations of cargoes along paths extracted from the experimental networks. We find excellent agreement between the trends in run length, displacement, and trajectory persistence length comparing the experimental and simulated trajectories. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Comments: 23 Pages, 7 Figures, 4 Tables

Timed material self-assembly controlled by circadian clock proteins

Authors: Gregor Leech, Lauren Melcher, Michelle Chiu, Maya Nugent, Lily Burton, Janet Kang, Soo Ji Kim, Sourav Roy, Leila Farhadi, Jennifer L. Ross, Moumita Das, Michael J. Rust, Rae M. Robertson-Anderson

Abstract: Active biological molecules present a powerful, yet largely untapped, opportunity to impart autonomous regulation to materials. Because these systems can function robustly to regulate when and where chemical reactions occur, they have the ability to bring complex, life-like behavior to synthetic materials. Here, we achieve this design feat by using functionalized circadian clock proteins, KaiB and… ▽ More Active biological molecules present a powerful, yet largely untapped, opportunity to impart autonomous regulation to materials. Because these systems can function robustly to regulate when and where chemical reactions occur, they have the ability to bring complex, life-like behavior to synthetic materials. Here, we achieve this design feat by using functionalized circadian clock proteins, KaiB and KaiC, to engineer time-dependent crosslinking of colloids. The resulting material self-assembles with programmable kinetics, producing macroscopic changes in material properties, via molecular assembly of KaiB-KaiC complexes. We show that colloid crosslinking depends strictly on the phosphorylation state of KaiC, with kinetics that are synced with KaiB-KaiC complexing. Our microscopic image analyses and computational models indicate that the stability of colloidal super-structures depends sensitively on the number of Kai complexes per colloid connection. Consistent with our model predictions, a high concentration stabilizes the material against dissolution after a robust self-assembly phase, while a low concentration allows circadian oscillation of material structure. This work introduces the concept of harnessing biological timers to control synthetic materials; and, more generally, opens the door to using protein-based reaction networks to endow synthetic systems with life-like functional properties. △ Less

Submitted 20 March, 2024; v1 submitted 1 March, 2023; originally announced March 2023.

Comments: 5 figures + SI

Motor antagonism dictates emergent dynamics in active double networks tuned by crosslinkers

Authors: Ryan J. McGorty, Christopher J. Currie, Jonathan Michel, Mehrzad Sasanpour, Christopher Gutner, K. Alice Lindsay, Michael J. Rust, Parag Katira, Moumita Das, Jennifer L. Ross, Rae M. Robertson-Anderson

Abstract: The cytoskeleton relies on diverse populations of motors, filaments, and binding proteins acting in concert to enable non-equilibrium processes ranging from mitosis to chemotaxis. Its versatile reconfigurability, programmed by interactions between its constituents, make the cytoskeleton foundational active matter. Yet, current active matter endeavors are limited largely to single force-generating… ▽ More The cytoskeleton relies on diverse populations of motors, filaments, and binding proteins acting in concert to enable non-equilibrium processes ranging from mitosis to chemotaxis. Its versatile reconfigurability, programmed by interactions between its constituents, make the cytoskeleton foundational active matter. Yet, current active matter endeavors are limited largely to single force-generating components acting on a single substrate, far from the composite cytoskeleton in cells. Here, we engineer actin-microtubule double-networks, driven by kinesin and myosin motors and tuned by crosslinkers, to ballistically restructure and flow with speeds that span three orders of magnitude depending on the composite formulation and time relative to the onset of motor activity. Differential dynamic microscopy analyses reveal that kinesin and myosin compete to delay the onset of acceleration and suppress discrete restructuring events, while passive crosslinking of either actin or microtubules has an opposite effect. Our minimal advection-diffusion model and spatial correlation analyses correlate these dynamics to structure, with motor antagonism suppressing reconfiguration and de-mixing, while crosslinking enhances clustering. Despite the rich formulation space and emergent formulation-dependent structures, the non-equilibrium dynamics across all networks and timescales can be organized into three classes: slow isotropic reorientation, fast directional flow, and multimode restructuring. Moreover, our mathematical model demonstrates that diverse structural motifs can arise simply from the interplay between motor-driven advection and frictional drag. These general features of our platform facilitate applicability to other active matter systems, and shed light on diverse ways that cytoskeletal components can cooperate or compete to enable wide-ranging cellular processes. △ Less

Submitted 19 May, 2023; v1 submitted 21 December, 2021; originally announced December 2021.

Non-equilibrium fluctuations and nonlinear response of an active bath

Authors: Hunter Seyforth, Mauricio Gomez, W. Benjamin Rogers, Jennifer L. Ross, Wylie W. Ahmed

Abstract: We analyze the dynamics of a passive colloidal probe immersed in an active bath using an optical trap to study three physical processes: (1) the non-equilibrium fluctuations transferred to the probe by the active bath, (2) the friction experienced by the probe as it is driven through the active bath, and (3) the force relaxation of the probe returning to its equilibrium position. We measure the lo… ▽ More We analyze the dynamics of a passive colloidal probe immersed in an active bath using an optical trap to study three physical processes: (1) the non-equilibrium fluctuations transferred to the probe by the active bath, (2) the friction experienced by the probe as it is driven through the active bath, and (3) the force relaxation of the probe returning to its equilibrium position. We measure the local force dynamics where all of the following characteristics are of $\mathcal{O}(1)$: the size of the probe colloid relative to active bath particle; the size of the probe colloid relative to the characteristic run-length of an active particle; and the timescale of probe movement to the persistence time of an active particle. We find at Péclet (Pe) $\ll 1$ the active suspension exhibits shear thinning down to the solvent viscosity (but not below); at $0.85 <$ Pe $\leq 5.1$ the active bath shear thickens; and at Pe $\geq 8.5$ the effective viscosity of the active bath shows a decreased effect of thickening and plateaus. These results are in agreement with recent modeling and simulations of the nonlinear rheology of an isotropic active bath, providing experimental verification, and suggesting the model predictions extends to moderately dense suspensions. Further, we observe that the distribution of force fluctuations depends on Pe, unlike in passive equilibrium baths. Lastly, we measure the energy transfer rate from the active bath to the probe to be $\langle J \rangle \approx 10^3$ $k_B T/$s, which leads to an increase in the effective diffusion of the probe by a factor of $\sim 2$. △ Less

Submitted 21 March, 2022; v1 submitted 29 October, 2021; originally announced October 2021.

Comments: 11 pages, 5 figures

Journal ref: Phys. Rev. Research 4, 023043 (2022)

3D Reconstruction of Bias Effects on Porosity, Alignment and Mesoscale Structure in Electrospun Tubular Polycaprolactone

Authors: Y. Liu, F. J. Chaparro, Z. Gray, J. Gaumer, D. B. Cybyk, L. Ross, P. Gosser, Z. Tian, Y. Jia, T. Dull, A. L. Yarin, J. J. Lannutti

Abstract: Porosity variations in tubular scaffolds are critical to reproducible, sophisticated applications of electrospun fibers in biomedicine. Established laser micrometry techniques produced ~14,000 datapoints enabling thickness and porosity plots versus both the azimuthal (Phi) and axial (Z) directions following cylindrical mandrel deposition. These 3D datasets could then be "unrolled" into "maps" reve… ▽ More Porosity variations in tubular scaffolds are critical to reproducible, sophisticated applications of electrospun fibers in biomedicine. Established laser micrometry techniques produced ~14,000 datapoints enabling thickness and porosity plots versus both the azimuthal (Phi) and axial (Z) directions following cylindrical mandrel deposition. These 3D datasets could then be "unrolled" into "maps" revealing variations in thickness and porosity versus 0, -5, and -15 kV collector bias. As bias increases, thinner, more "focused" depositions occur. Simultaneous decreases in net porosity versus bias (91.1% 0kV > 83.4% -5kV > 80.2% -15 kV) are sensible, but significant changes in the distribution were unexpected. Surprisingly, at 0 kV, extensive mesoscale surface roughness is evident. Optical profilometry revealed unique features ~1600-420 mum in size, standing ~210 mum above the surrounding surface. These shrink to only ~440-150 mum in size and ~30 mum higher at -5 kV bias and disappear entirely at -15 kV. Scanning electron microscopy (SEM) resolved these into novel, localized "domains" containing tightly aligned fibers oriented parallel to the mandrel axis. Unexpectedly, we also observed substantial orientation along the mandrel axis. By modifying classical bending instability models to incorporate cylindrical electric fields, simulation revealed that horizontal components in the modified electric field alter bending loop shape, causing the observed alignment. This provides a new, easily utilized tool enabling facile, efficient tuning of orientation. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: Submitted to Polymer, after minor revision

Journal ref: Polymer 232 (2021) 124120

Active restructuring of cytoskeleton composites leads to increased mechanical stiffness, memory, and heterogeneity

Authors: Janet Y. Sheung, Daisy H. Achiriloaie, Karthik Peddireddy, Gloria Lee, Michael J. Rust, Moumita Das, Jennifer L. Ross, Rae M. Robertson-Anderson

Abstract: The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers mi… ▽ More The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers microrheology on actin-microtubule composites driven by myosin II motors to show that motor activity increases the linear viscoelasticity and elastic storage of the composite by active restructuring to a network of tightly-packed filament clusters and bundles. Our nonlinear microrheology measurements performed hours after cessation of activity show that the motor-contracted structure is stable and robust to nonlinear forcing. Unique features of the nonlinear response include increased mechanical stiffness, memory and heterogeneity, coupled with suppressed filament bending following motor-driven restructuring. Our results shed important new light onto the interplay between viscoelasticity and non-equilibrium dynamics in active polymer composites such as the cytoskeleton. △ Less

Submitted 7 May, 2022; v1 submitted 6 May, 2021; originally announced May 2021.

Journal ref: ACS Macro Lett. 2021, 10, 9 1151-1158

Active Cytoskeletal Composites Display Emergent Tunable Contractility and Restructuring

Authors: Gloria Lee, Gregor Leech, Pancy Lwin, Jonathan Michel, Christopher Currie, Michael J. Rust, Jennifer L. Ross, Ryan J. McGorty, Moumita Das, Rae M. Robertson-Anderson

Abstract: The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidi… ▽ More The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidity, and force-generation affect emergent material properties in in vitro composites of actin, tubulin, and myosin. We use time-resolved differential dynamic microscopy and spatial image autocorrelation to show that ballistic contraction occurs in composites with sufficient flexibility and motor density, but that a critical fraction of microtubules is necessary to sustain controlled dynamics. Our active double-network models reveal that percolated actomyosin networks are essential for contraction, but that networks with comparable actin and microtubule densities can uniquely resist mechanical stresses while simultaneously supporting substantial restructuring. Our findings provide a much-needed blueprint for designing cytoskeleton-inspired materials that couple tunability with resilience and adaptability. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Comparison of different approaches to single-molecule imaging of enhanced enzyme diffusion

Authors: Mengqi Xu, W. Benjamin Rogers, Wylie W. Ahmed, Jennifer L. Ross

Abstract: Enzymes have been shown to diffuse faster in the presence of their reactants. Recently, we revealed new insights into this process of enhanced diffusion using single-particle tracking (SPT) with total internal reflection fluorescence (TIRF) microscopy. We found that the mobility of individual enzymes was enhanced three fold in the presence of the substrate, and the motion remained Brownian. In thi… ▽ More Enzymes have been shown to diffuse faster in the presence of their reactants. Recently, we revealed new insights into this process of enhanced diffusion using single-particle tracking (SPT) with total internal reflection fluorescence (TIRF) microscopy. We found that the mobility of individual enzymes was enhanced three fold in the presence of the substrate, and the motion remained Brownian. In this work, we compare different experimental designs, as well as different data analysis approaches, for studying single enzyme diffusion. We first tether enzymes directly on supported lipid bilayers (SLBs) to constrain the diffusion of enzymes to two dimensions. This experimental design recovers the 3-fold enhancement in enzyme diffusion in the presence of the substrate, as we observed before. We also simplify our system by replacing the bulky polymers used in the prior chamber design with a SLB-coated surface and glycerol. Using this newly-designed SLB/glycerol chamber, we compare two different analysis approaches for SPT: the mean-squared displacement (MSD) analysis and the jump-length analysis. We find that the MSD analysis requires high viscosity and large particles to accurately report the diffusion coefficient, while jump-length analysis depends less on the viscosity or size. Furthermore, the SLB-glycerol chamber fails to reproduce the enhanced diffusion of enzymes because glycerol inhibits enzyme activity. △ Less

Submitted 30 December, 2020; originally announced December 2020.

Entanglement and weak interaction driven mobility of small molecules in polymer networks

Authors: Rajarshi Guha, Subhadip Ghosh, Darrell Velegol, Peter J. Butler, Ayusman Sen, Jennifer L. Ross

Abstract: Diffusive transport of small molecules within the internal structures of biological and synthetic material systems is complex because the crowded environment presents chemical and physical barriers to mobility. We explored this mobility using a synthetic experimental system of small dye molecules diffusing within a polymer network at short time scales. We find that the diffusion of inert molecules… ▽ More Diffusive transport of small molecules within the internal structures of biological and synthetic material systems is complex because the crowded environment presents chemical and physical barriers to mobility. We explored this mobility using a synthetic experimental system of small dye molecules diffusing within a polymer network at short time scales. We find that the diffusion of inert molecules is inhibited by the presence of the polymers. Counter-intuitively, small, hydrophobic molecules display smaller reduction in mobility and also able to diffuse faster through the system by leveraging crowding specific parameters. We explained this phenomenon by developing a de novo model and using these results, we hypothesized that non-specific hydrophobic interactions between the molecules and polymer chains could localize the molecules into compartments of overlapped and entangled chains where they experience microviscosity, rather than macroviscosity. We introduced a characteristic interaction time parameter to quantitatively explain experimental results in the light of frictional effects and molecular interactions. Our model is in good agreement with the experimental results and allowed us to classify molecules into two different mobility categories solely based on interaction. By changing the surface group, polymer molecular weight, and by adding salt to the medium, we could further modulate the mobility and mean square displacements of interacting molecules. Our work has implications in understanding intracellular diffusive transport in microtubule networks and other systems with macromolecular crowding and could lead to transport enhancement in synthetic polymer systems. △ Less

Submitted 25 September, 2020; originally announced September 2020.

Crowder and Surface Effects on Self-organization of Microtubules

Authors: Sumon Sahu, Lena Herbst, Ryan Quinn, Jennifer L. Ross

Abstract: Microtubules are an essential physical building block of cellular systems. They are organized using specific crosslinkers, motors, and influencers of nucleation and growth. With the addition of anti-parallel crosslinkers, microtubule pattern goes through transition from fan-like structures to homogeneous tactoid condensates in vitro. Tactoids are reminiscent of biological mitotic spindles, the cel… ▽ More Microtubules are an essential physical building block of cellular systems. They are organized using specific crosslinkers, motors, and influencers of nucleation and growth. With the addition of anti-parallel crosslinkers, microtubule pattern goes through transition from fan-like structures to homogeneous tactoid condensates in vitro. Tactoids are reminiscent of biological mitotic spindles, the cell division machinery. To accomplish these organizations, we use polymer crowding agents. Here we study how altering the properties of the crowders, such as size, concentration, and molecular weight, affect microtubule organization. Using simulations with experiments, we observe a scaling law associated with the fan-like patterns in the absence of crosslinkers. Tactoids formed in the presence of crosslinkers show variable length, depending on the crowders. The subtle differences correlate to individual filament contour length changes, likely due to effects on nucleation and growth of the microtubules. Using quantitative image analysis, we deduce that the tactoids differ from traditional liquid crystal organization, as they are limited in width irrespective of crowders and surfaces, and behave as solid-like condensates. △ Less

Submitted 20 May, 2021; v1 submitted 10 September, 2020; originally announced September 2020.

Comments: 22 pages, 12 figures

Journal ref: Phys. Rev. E 103, 062408 (2021)

Direct Single Molecule Imaging of Enhanced Enzyme Diffusion

Authors: Mengqi Xu, Lyanne Valdez, Aysuman Sen, Jennifer L. Ross

Abstract: Recent experimental results have shown that active enzymes can diffuse faster when they are in the presence of their substrates. Fluorescence correlation spectroscopy (FCS), which relies on analyzing the fluctuations in fluorescence intensity signal to measure the diffusion coefficient of particles, has typically been employed in most of the prior studies. However, flaws in the FCS method, due to… ▽ More Recent experimental results have shown that active enzymes can diffuse faster when they are in the presence of their substrates. Fluorescence correlation spectroscopy (FCS), which relies on analyzing the fluctuations in fluorescence intensity signal to measure the diffusion coefficient of particles, has typically been employed in most of the prior studies. However, flaws in the FCS method, due to its high sensitivity to the environment, have recently been evaluated, calling the prior diffusion results into question. It behooves us to adopt complimentary and direct methods to measure the mobility of enzymes in solution. Herein, we use a novel technique of direct single-molecule imaging to observe the diffusion of single enzymes. This technique is less sensitive to intensity fluctuations and gives the diffusion coefficient directly based on the trajectory of the enzymes. Our measurements recapitulate that enzyme diffusion is enhanced in the presence of its substrate and find that the relative increase in diffusion of a single enzyme is even higher than those previously reported using FCS. We also use this complementary method to test if the total enzyme concentration affects the relative increase in diffusion and if enzyme oligomerization state changes during catalytic turnover. We find that the diffusion increase is independent of the total background concentration of enzyme and the catalysis of substrate does not change the oligomerization state of enzymes. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Lett. 123, 128101 (2019)

Quantum transport properties of industrial $^{28}$Si/$^{28}$SiO$_2$

Authors: D. Sabbagh, N. Thomas, J. Torres, R. Pillarisetty, P. Amin, H. C. George, K. Singh, A. Budrevich, M. Robinson, D. Merrill, L. Ross, J. Roberts, L. Lampert, L. Massa, S. Amitonov, J. Boter, G. Droulers, H. G. J. Eenink, M. van Hezel, D. Donelson, M. Veldhorst, L. M. K. Vandersypen, J. S. Clarke, G. Scappucci

Abstract: We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of… ▽ More We investigate the structural and quantum transport properties of isotopically enriched $^{28}$Si/$^{28}$SiO$_2$ stacks deposited on 300 mm Si wafers in an industrial CMOS fab. Highly uniform films are obtained with an isotopic purity greater than 99.92\%. Hall-bar transistors with an equivalent oxide thickness of 17 nm are fabricated in an academic cleanroom. A critical density for conduction of $1.75\times10^{11}$ cm$^{-2}$ and a peak mobility of 9800 cm$^2$/Vs are measured at a temperature of 1.7 K. The $^{28}$Si/$^{28}$SiO$_2$ interface is characterized by a roughness of $Δ=0.4$ nm and a correlation length of $Λ=3.4$ nm. An upper bound for valley splitting energy of 480 $μ$eV is estimated at an effective electric field of 9.5 MV/m. These results support the use of wafer-scale $^{28}$Si/$^{28}$SiO$_2$ as a promising material platform to manufacture industrial spin qubits. △ Less

Submitted 21 January, 2019; v1 submitted 15 October, 2018; originally announced October 2018.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Applied 12, 014013 (2019)

Small-mass atomic defects enhance vibrational thermal transport at disordered interfaces with ultrahigh thermal boundary conductance

Authors: Ashutosh Giri, Sean W. King, William A. Lanford, Antonio R. Mei, Devin Merril, Liza Ross, Ron Oviedo, John Richards, David H. Olson, Jeffrey L. Braun, John T. Gaskins, Freddy DeAngelis, Asegun Henry, Patrick E. Hopkins

Abstract: The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the materia… ▽ More The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the material interface and defect atoms,$^{2-6}$ a finding that contradicts traditional theory and conventional understanding. By manipulating the local heat flux of atomic vibrations that comprise these interfacial modes, in principle, the TBC can be increased. In this work, we provide evidence that interfacial defects can enhance the TBC across interfaces through the emergence of unique high frequency vibrational modes that arise from atomic mass defects at the interface with relatively small masses. We demonstrate ultrahigh TBC at amorphous SiOC:H/SiC:H interfaces, approaching 1 GW m$^{-2}$ K$^{-1}$, that is further increased through the introduction of nitrogen defects. The fact that disordered interfaces can exhibit such high conductances, which can be further increased with additional defects offers a unique direction in controlling interfacial thermal transport that becomes important in manipulating heat transfer across materials with high densities of interfaces. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Active Disassembly and Reassembly of Actin Networks Induces Distinct Biphasic Mechanics

Authors: Bekele J. Gurmessa, Nicholas Bitten, Dan T. Nguyen, Jennifer L. Ross, Omar A. Sale, Moumita Das, Rae M. Robertson-Anderson

Abstract: Actin is a key component of the cytoskeleton, which plays central roles in cell motility, division, growth, and tensile strength. To enable this wide range of transient mechanical processes and properties, networks of actin filaments continuously disassemble and reassemble via active de/re-polymerization. However, the question remains as to how de/re-polymerization kinetics of individual actin fil… ▽ More Actin is a key component of the cytoskeleton, which plays central roles in cell motility, division, growth, and tensile strength. To enable this wide range of transient mechanical processes and properties, networks of actin filaments continuously disassemble and reassemble via active de/re-polymerization. However, the question remains as to how de/re-polymerization kinetics of individual actin filaments translate to time-varying mechanics of dis/re-assembling networks. To address this question, to ultimately elucidate the molecular mechanisms that enable cells to exhibit a myriad of transitory mechanical properties, we couple time-resolved active microrheology with microfluidics to measure the time-varying viscoelastic moduli of entangled and crosslinked actin networks during chemically-triggered network disassembly and reassembly. We also develop a corresponding mathematical model that relates the time-evolution of filament length to the resulting time-dependent storage moduli of evolving networks. During disassembly, we find that the moduli exhibit two distinct exponential decays, with experimental time constants of $\sim$169 and $\sim$47 min, which we show arises from a phase transition from a rigid percolated network to a non-rigid regime occurring after $\sim$90 min. During reassembly, measured moduli exhibit linear increase with time for $\sim$90 min, after which steady-state values are achieved. Our theoretical model shows that reassembly mechanics are dominated by elongation kinetics, and that elongation rates are much slower than has been recently assumed. Our measurements shed much needed light onto how polymerization kinetics map to time-varying mechanics of actively evolving cytoskeleton networks, and provide a powerful platform for studying other active and dynamic systems currently under intense investigation. △ Less

Submitted 10 October, 2017; originally announced October 2017.

Comments: 15 pages, 5 figures

Contractility in an Extensile System

Authors: Kasimira T. Stanhope, Vikrant Yadav, Christian D. Santangelo, Jennifer L. Ross

Abstract: Essentially all biology is active and dynamic. Biological entities autonomously sense, com- pute, and respond using energy-coupled ratchets that can produce force and do work. The cytoskeleton, along with its associated proteins and motors, is a canonical example of biological active matter, which is responsible for cargo transport, cell motility, division, and morphol- ogy. Prior work on cytoskel… ▽ More Essentially all biology is active and dynamic. Biological entities autonomously sense, com- pute, and respond using energy-coupled ratchets that can produce force and do work. The cytoskeleton, along with its associated proteins and motors, is a canonical example of biological active matter, which is responsible for cargo transport, cell motility, division, and morphol- ogy. Prior work on cytoskeletal active matter systems showed either extensile or contractile dynamics. Here, we demonstrate a cytoskeletal system that can control the direction of the network dynamics to be either extensile, contractile, or static depending on the concentration of filaments or transient crosslinkers through systematic variation of the crosslinker or micro- tubule concentrations. Based off these new observations and our previously published results, we created a simple one-dimensional model of the interaction of filaments within a bundle. Despite its simplicity, our model recapitulates the observed activities of our experimental sys- tem, implying that the dynamics of our finite networks of bundles are driven by the local filament-filament interactions within the bundle. Finally, we show that contractile phases can result in autonomously motile networks that resemble cells. Our experiments and model allow us to gain a deeper understanding of cytoskeletal dynamics and provide a stepping stone for designing active, autonomous systems that could potentially dynamically switch states. △ Less

Submitted 25 March, 2017; originally announced March 2017.

Comments: 6 figures, 13 pages