-
Enhanced Luminous Transmission and Solar Modulation in Thermochromic VO2 Aerogel-Like Films via Remote Plasma Deposition
Authors:
Jose M. Obrero-Perez,
Gloria Moreno-Martinez,
Teresa C. Rojas,
Francisco J. Ferrer,
Francisco G. Moscoso,
Lidia Contreras-Bernal,
Javier Castillo-Seoane,
Fernando Nunez-Galvez,
Francisco J. Aparicio,
Ana Borras,
Juan R. Sanchez-Valencia,
Angel Barranco
Abstract:
Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 degrees C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar rad…
▽ More
Vanadium dioxide (VO2) is a thermochromic material that undergoes a phase transition from a monoclinic semiconducting state to a rutile metallic state at 68 degrees C, a temperature close to room temperature. This property makes VO2 particularly valuable in applications such as optical and electrical switches, data storage, neuromorphic computing, and remarkably dynamic smart windows for solar radiation control. VO2 typically needs to be synthesized for these applications as nanostructured thin films. Over the past few decades, significant efforts have been made to control the thermochromic properties of VO2 through crystal structure tuning, doping, and the development of VO2 nanocomposites. Additionally, introducing nano- and mesoporosity has been shown to enhance the optical properties of thermochromic VO2 films. This study presents a methodology for producing highly porous, aerogel-like V2O5 films, which can be thermally processed to form aerogel-like VO2 films. This process is based on sequential plasma polymerization and plasma etching to produce aerogel-like V2O5 films that are annealed to yield ultraporous nanocrystalline VO2 films. The sacrificial vanadium-containing plasma polymers are obtained by remote plasma-assisted vacuum deposition (RPAVD) using vanadyl porphyrin as a precursor and Ar as plasma gas. The aerogel-like VO2 films show exceptional thermochromic performance with luminous transmittances higher than 54%, solar modulation up to 18.8%, and IR modulation up to 35.5%. The presented plasma methodology is versatile, allowing both the synthesis of VO2 plasmonic structures to enhance the thermochromic response and the encapsulation of films to improve their stability in air dramatically. Additionally, this solvent-free synthetic method is fully compatible with doping procedures, scalable, and holds great potential for designing and optimizing smart window coatings.
△ Less
Submitted 10 April, 2025;
originally announced April 2025.
-
Low-Temperature Remote Plasma Synthesis of Highly Porous TiO$_2$ as Electron Transport Layers in Perovskite Solar Cells
Authors:
Jose M. Obrero-Perez,
Fernando Nunez-Galvez,
Lidia Contreras-Bernal,
Javier Castillo-Seoane,
Gloria P. Moreno,
Triana Czermak,
Francisco J. Aparicio,
Teresa C. Rojas,
Francisco J. Ferrer,
Ana Borras,
Angel Barranco,
Juan R Sanchez-Valencia
Abstract:
Halide perovskite solar cells (PSCs) offer high efficiency and low costs, making them key for future photovoltaics. Optimizing charge transport layers is crucial, with porous TiO$_2$ widely used as electron transport layers (ETL) due to its energy alignment, transparency, and abundance. However, its efficiency relies on crystallinity requiring high-temperature processing (>450$^\circ$C), increasin…
▽ More
Halide perovskite solar cells (PSCs) offer high efficiency and low costs, making them key for future photovoltaics. Optimizing charge transport layers is crucial, with porous TiO$_2$ widely used as electron transport layers (ETL) due to its energy alignment, transparency, and abundance. However, its efficiency relies on crystallinity requiring high-temperature processing (>450$^\circ$C), increasing costs and limiting flexible substrates. Low-temperature wet-chemical methods face scalability issues due to material waste and hazardous solvents. In this context, plasma-based technologies are emerging as a more efficient and sustainable alternative to oxide-based ETLs. This study presents the synthesis of TiO$_2$ layers using an advanced plasma method combining remote plasma-assisted vacuum deposition (RPAVD) and soft plasma etching (SPE) at mild temperatures (<200$^\circ$C), allowing control of microstructure and porosity. The resulting nanocolumnar film, decorated with a highly porous aerogel-like layer, enhances optical and electronic properties. These plasma-synthesized TiO$_2$ layers are antireflective and improve the efficiency in porous n-i-p PSCs, matching the performance of high-temperature reference cells. These PSCs achieve a champion PCE of 14.6%, a high value compared to reference devices synthesized at 450°C. Impedance spectroscopy confirms high recombination resistance and stable capacitance, linked to improved perovskite crystallinity. Our results highlight the potential of the RPAVD+SPE approach for producing low-temperature efficient ETLs, providing a feasible, industrially scalable, and eco-friendly alternative for manufacturing flexible, high-performance photovoltaic devices.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Highly stable photoluminescence in vacuum-processed halide perovskite core-shell 1D nanostructures
Authors:
Javier Castillo-Seoane,
Lidia Contreras-Bernal,
T. Cristina Rojas,
Juan P. Espinos,
Andres-Felipe Castro-Mendez,
Juan-P. Correa-Baena,
Angel Barranco,
Juan R. Sanchez-Valencia,
Ana Borras
Abstract:
Hybrid organometal halide perovskites (HP) present exceptional optoelectronic properties, but their poor long-term stability is a major bottleneck for their commercialization. Herein, we present a solvent-free approach to growing single-crystal organic nanowires (ONW), nanoporous metal oxide scaffolds, and HP to form a core@multishell architecture. The synthetic procedure is carried out under mild…
▽ More
Hybrid organometal halide perovskites (HP) present exceptional optoelectronic properties, but their poor long-term stability is a major bottleneck for their commercialization. Herein, we present a solvent-free approach to growing single-crystal organic nanowires (ONW), nanoporous metal oxide scaffolds, and HP to form a core@multishell architecture. The synthetic procedure is carried out under mild vacuum conditions employing thermal evaporation for the metal-free phthalocyanine (H2Pc) nanowires, which will be the core, plasma-enhanced chemical vapor deposition (PECVD) for the TiO2 shell, and co-evaporation of lead iodide (PbI2) and methylammonium iodide (CH3NH3I / MAI) for the CH3NH3PbI3 (MAPbI3 / MAPI) perovskite shell. We present a detailed characterization of the nanostructures by (S)-TEM and XRD, revealing a different crystallization of the hybrid perovskite depending on the template: while the growth on H2Pc nanowires induces the typical tetragonal structure of the MAPI perovskite, a low-dimensional phase (LDP) was observed on the one-dimensional TiO2 nanotubes. Such a combination yields an unprecedentedly stable photoluminescence emission over 20 hours and over 300 hours after encapsulation in polymethyl methacrylate (PMMA) under different atmospheres including N2, air, and high moisture levels. In addition, the unique one-dimensional morphology of the system, together with the high refractive index HP, allows for a strong waveguiding effect along the nanowire length.
△ Less
Submitted 19 March, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Conformal TiO$_2$ aerogel-like films by plasma deposition: from omniphobic antireflective coatings to perovskite solar cells photoelectrodes
Authors:
Jose M. Obrero,
Lidia Contreras-Bernal,
Francisco J. Aparicio,
Teresa C. Rojas,
Francisco J. Ferrer,
Noe Orozco,
Zineb Saghi,
Triana Czermak,
Jose M. Pedrosa,
Carmen Lopez-Santos,
Kostya,
Ostrikov,
Ana Borras,
Juan Ramon Sanchez-Valencia,
Angel Barranco
Abstract:
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while mainta…
▽ More
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultra-porous titanium dioxide thin films at room or mild temperatures (T lower or equal to 120 degrees Celsius) by the sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85 percent that are comparable to advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures presenting a distribution of anatase clusters embedded in the sponge-like structure. Surprisingly, the porous structure remains after annealing the films at 450 degrees Celsius in air, which increases the fraction of the embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive becoming super-hydrophilic subjected to UV light irradiation The supported percolated nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel film thickness reaching efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and is applicable to ultra-high porous conformal oxides of different compositions with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Highly anisotropic organometal halide perovskite nanowalls grown by Glancing Angle Deposition
Authors:
Javier Castillo-Seoane,
Lidia Contreras-Bernal,
Jose M. Obrero-Perez,
Xabier Garcia-Casas,
Francisco Lorenzo-Lazaro,
Francisco J. Aparicio,
M. Carmen Lopez-Santos,
T. Cristina Rojas,
Juan A. Anta,
Ana Borras,
Angel Barranco,
Juan R. Sanchez-Valencia
Abstract:
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexibl…
▽ More
Polarizers are ubiquitous components in optoelectronic devices of daily use as displays, optical sensors or photographic cameras, among others. Yet the control over light polarization is an unresolved challenge as the main drawback of the current display technologies relays in significant optical losses. In such a context, organometal halide perovskites can play a decisive role given their flexible synthesis with under design optical properties . Therefore, along with their outstanding electrical properties have elevated hybrid perovskites as the material of choice in photovoltaics and optoelectronics. Among the different organometal halide perovskite nanostructures, nanowires and nanorods have lately arise as key players for the control of light polarization for lighting or detector applications. Herein, we will present the unprecedented fabrication of highly aligned and anisotropic methylammonium lead iodide (MAPI) perovskite nanowalls by Glancing Angle Deposition of PbI2 under high vacuum followed by CH3NH3I deposition at normal angle. Our approach offers a direct route for the fabrication of perovskite nanostructures virtually on any substrate, including on photovoltaic devices. The unparalleled alignment degree of the perovskite nanowalls provides the samples with strong anisotropic optical properties such as light absorption and photoluminescence, the latter with a maximum polarization ratio of P=0.43. Furthermore, the implementation of the MAPI nanowalls in photovoltaic devices provides them with a polarization-sensitive response, with a maximum photocurrent difference of 2.1 % when illuminating with the near-infrared range of the solar spectrum (>700 nm). Our facile vacuum-based approach embodies a milestone in the development of last generation polarization-sensitive perovskite-based optoelectronic devices such as lighting appliances or self-powered photodetectors.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Effect of Al content on the hardness and thermal stability study of AlTiN and AlTiBN coatings deposited by HiPIMS
Authors:
A. Mendez,
M. A. Monclus,
J. A. Santiago,
I. Fernandez-Martinez,
T. C. Rojas,
J. Garcia-Molleja,
M. Avella,
N. Dams,
M. Panizo-Laiz,
J. M. Molina-Aldareguia
Abstract:
The microstructure, mechanical properties and thermal stability of AlTiN and AlTiBN coatings grown by reactive high-power impulse magnetron sputtering (HiPIMS) have been analyzed as a function of Al/(Al+Ti) ratio, x, between 0.5 and 0.8. The coatings were predominantly formed by a face-centered cubic Ti(Al)N crystalline phase, both with and without B, even for x ratios as high as 0.6, which is hig…
▽ More
The microstructure, mechanical properties and thermal stability of AlTiN and AlTiBN coatings grown by reactive high-power impulse magnetron sputtering (HiPIMS) have been analyzed as a function of Al/(Al+Ti) ratio, x, between 0.5 and 0.8. The coatings were predominantly formed by a face-centered cubic Ti(Al)N crystalline phase, both with and without B, even for x ratios as high as 0.6, which is higher than the ratio typically encountered for AlTiN coatings deposited by reactive magnetron sputtering. B doping, in combination with the highly energetic deposition conditions offered by HiPIMS, results in the suppression of the columnar grain morphology typically encountered in AlTiN coatings. On the contrary, the AlTiBN coatings grown by HiPIMS present a dense nanocomposite type microstructure, formed by nanocrystalline Ti(Al)N domains and amorphous regions composed of Ti(Al)B2 and BN. As a result, high-Al content (x>0.6) AlTiBN coatings grown by HiPIMS offer higher hardness, elasticity and fracture toughness than AlTiN coatings. Moreover, the thermal stability and the hot hardness are substantially enhanced, delaying the onset of formation of the detrimental hexagonal AlN phase from 850 C in the case of AlTiN, to 1000 C in the case of AlTiBN.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
