-
Response of a Cold-Electron Bolometer in a coplanar antenna system
Authors:
D. A. Pimanov,
A. L. Pankratov,
A. V. Gordeeva,
A. V. Chiginev,
A. V. Blagodatkin,
L. S. Revin,
S. A. Razov,
V. Yu. Safonova,
I. A. Fedotov,
E. V. Skorokhodov,
A. N. Orlova,
D. A. Tatarsky,
N. S. Gusev,
I. V. Trofimov,
A. M. Mumlyakov,
M. A. Tarkhov
Abstract:
Cold electron bolometers have shown their suitability for use in modern fundamental physical experiments. Fabrication and measurements of the samples with cold-electron bolometers integrated into coplanar antennas are performed in this study. The bolometric layer was made using combined aluminum-hafnium technology to improve quality of aluminum oxide layer and decrease the leakage current. The sam…
▽ More
Cold electron bolometers have shown their suitability for use in modern fundamental physical experiments. Fabrication and measurements of the samples with cold-electron bolometers integrated into coplanar antennas are performed in this study. The bolometric layer was made using combined aluminum-hafnium technology to improve quality of aluminum oxide layer and decrease the leakage current. The samples of two types were measured in a dilution cryostat at various temperatures from 20 to 300 mK. The first sample with Ti/Au/Pd antenna shows response in the two frequency bands, at 7--9 GHz with bandwidth of about 20%, and also at 14 GHz with 10% bandwidth. The NEP below 10 aW/Hz^1/2 is reached at 300 mK for 7.7 GHz signal. The second sample with aluminum made antenna shows response in the frequency range 0.5--3 GHz due to the effect of kinetic inductance of superconducting aluminum.
△ Less
Submitted 10 December, 2024;
originally announced December 2024.
-
Josephson microwave photon detector operating at 0.7 K
Authors:
Dmitry A. Ladeynov,
Andrey L. Pankratov,
Leonid S. Revin,
Anna V. Gordeeva,
Alexander V. Chiginev,
Sergey A. Razov,
Evgeny V. Ilichev
Abstract:
We predict that the threshold detectors based on Al Josephson junctions, with critical currents below 100 nA, exhibiting a phase diffusion regime, can be exploited for the microwave photon detection both at 17 mK and 700 mK. We demonstrate a detection of two- and one-photon energies at 5 GHz with 90% and 15% efficiency and dark count time of about 0.1 s and 0.01 s, respectively. The observed weak…
▽ More
We predict that the threshold detectors based on Al Josephson junctions, with critical currents below 100 nA, exhibiting a phase diffusion regime, can be exploited for the microwave photon detection both at 17 mK and 700 mK. We demonstrate a detection of two- and one-photon energies at 5 GHz with 90% and 15% efficiency and dark count time of about 0.1 s and 0.01 s, respectively. The observed weak temperature dependence of the detector's performance in the sub-kelvin range fully confirms its phase-diffusion mode of operation. On the other hand, these results show that inevitable thermal fluctuations are not the main source of the detector noise. Consequently, there is still a room to optimize the detector's performance. These results are important for axion search experiments in the range of 5-25 GHz (20-100 $μ$eV).
△ Less
Submitted 1 February, 2025; v1 submitted 7 May, 2024;
originally announced May 2024.
-
Observation of thermal microwave photons with a Josephson junction detector
Authors:
A. L. Pankratov,
A. V. Gordeeva,
A. V. Chiginev,
L. S. Revin,
A. V. Blagodatkin,
N. Crescini,
L. S. Kuzmin
Abstract:
When measuring electromagnetic radiation of frequency $f$, the most sensitive detector is the one that counts the single quanta of energy $h f$. Single photon detectors (SPDs) were demonstrated from $γ$-rays to infrared wavelengths, and extending this range down to the microwaves is the focus of intense research. The energy of $10\,\mathrm{GHz}$ microwave photon, about $40\,\mathrm{μeV}$ or…
▽ More
When measuring electromagnetic radiation of frequency $f$, the most sensitive detector is the one that counts the single quanta of energy $h f$. Single photon detectors (SPDs) were demonstrated from $γ$-rays to infrared wavelengths, and extending this range down to the microwaves is the focus of intense research. The energy of $10\,\mathrm{GHz}$ microwave photon, about $40\,\mathrm{μeV}$ or $7\, \mathrm{yJ},$ is enough to force a superconducting Josephson junction into its resistive state, making it suitable to be used as a sensor. In this work, we use an underdamped Josephson junction to detect single thermal photons stochastically emitted by a microwave copper cavity at millikelvin temperatures. After characterizing the source and detector, we vary the temperature of the resonant cavity and measure the increased photon rate. The device shows an efficiency up to 40% and a dark count rate of $0.1\,\mathrm{Hz}$ in a bandwidth of several gigahertz. To confirm the thermal nature of the emitted photons we verify their super-Poissonian statistics, which is also a signature of quantum chaos. We discuss detector application in the scope of Dark Matter Axion searches, and note its importance for quantum information, metrology and fundamental physics.
△ Less
Submitted 13 February, 2025; v1 submitted 16 April, 2024;
originally announced April 2024.
-
Observation of photon noise by cold-electron bolometers
Authors:
A. V. Gordeeva,
V. O. Zbrozhek,
A. L. Pankratov,
L. S. Revin,
V. A. Shamporov,
A. A. Gunbina,
L. S. Kuzmin
Abstract:
We have measured a response to a black body radiation and noise of the cold-electron bolometers. The experimental results have been fitted by theoretical model with two heat-balance equations. The measured noise has been decomposed into several terms with the help of theory. It is demonstrated that the photon noise exceeds any other noise components, that allows us to conclude that the bolometers…
▽ More
We have measured a response to a black body radiation and noise of the cold-electron bolometers. The experimental results have been fitted by theoretical model with two heat-balance equations. The measured noise has been decomposed into several terms with the help of theory. It is demonstrated that the photon noise exceeds any other noise components, that allows us to conclude that the bolometers see the photon noise. Moreover, a peculiar shape of the noise dependence on the absorbed power originates completely from the photonic component according to the theory. In the additional experiment on heating of the cryostat plate together with the sample holder we have observed nearly independence of the noise on the electron temperature of the absorber, which has provided another proof of the presence of the photon noise in the first experiment.
△ Less
Submitted 12 December, 2016;
originally announced December 2016.
-
"Quick and dirty" technology for fabrication of a single BiSrCaCuO mesas
Authors:
E. A. Vopilkin,
A. V. Chiginev,
L. S. Revin,
A. N. Tropanova,
I. Yu. Shuleshova,
A. I. Okhapkin,
A. D. Shovkun,
A. B. Kulakov,
A. L. Pankratov
Abstract:
The technology of wet etching allowing fabrication of standalone BiSrCaCuO mesa structures was proposed. The produced mesas can be produced much thicker than ones usually being studied. The time required for the fabrication is much smaller in comparison with the standard method of ion milling. The process used is controllable which provides acceptable precision of mesa fabrication. The current-vol…
▽ More
The technology of wet etching allowing fabrication of standalone BiSrCaCuO mesa structures was proposed. The produced mesas can be produced much thicker than ones usually being studied. The time required for the fabrication is much smaller in comparison with the standard method of ion milling. The process used is controllable which provides acceptable precision of mesa fabrication. The current-voltage characteristics of the sample showing Josephson nature were obtained. The qualitative comparison with characteristics of similar structures fabricated by other groups was carried out.
△ Less
Submitted 13 September, 2014;
originally announced September 2014.
-
Soliton scattering as a measurement tool for weak signals
Authors:
Igor I. Soloviev,
Nikolay V. Klenov,
Andrey L. Pankratov,
Leonid S. Revin,
Evgeniy Il'ichev,
Leonid S. Kuzmin
Abstract:
We have considered relativistic soliton dynamics governed by the sine-Gordon equation and affected by short spatial inhomogeneities of the driving force and thermal noise. Developed analytical and numerical methods for calculation of soliton scattering at the inhomogeneities allowed us to examine the scattering as a measurement tool for sensitive detection of polarity of the inhomogeneities. We ha…
▽ More
We have considered relativistic soliton dynamics governed by the sine-Gordon equation and affected by short spatial inhomogeneities of the driving force and thermal noise. Developed analytical and numerical methods for calculation of soliton scattering at the inhomogeneities allowed us to examine the scattering as a measurement tool for sensitive detection of polarity of the inhomogeneities. We have considered the superconducting fluxonic ballistic detector as an example of the device in which the soliton scattering is utilized for quantum measurements of superconducting flux qubit. We optimized the soliton dynamics for the measurement process varying the starting and the stationary soliton velocity as well as configuration of the inhomogeneities. For experimentally relevant parameters we obtained the signal-to-noise ratio above 100 reflecting good practical usability of the measurement concept.
△ Less
Submitted 31 July, 2015; v1 submitted 9 September, 2014;
originally announced September 2014.
-
The effect of bias feed profile on spectral properties of noisy Josephson flux flow oscillator
Authors:
E. A. Matrozova,
A. L. Pankratov,
L. S. Revin
Abstract:
For creation of a noisy non-stationary spectrometer working in the subTHz frequency range the power and spectral characteristics of a flux flow oscillator (FFO), based on a long Josephson junction are studied. The effect of various bias current profiles on the spectral linewidth of long overlap Josephson junction are investigated and comparison with the inline junction geometry is outlined. It has…
▽ More
For creation of a noisy non-stationary spectrometer working in the subTHz frequency range the power and spectral characteristics of a flux flow oscillator (FFO), based on a long Josephson junction are studied. The effect of various bias current profiles on the spectral linewidth of long overlap Josephson junction are investigated and comparison with the inline junction geometry is outlined. It has been demonstrated that the spectral linewidth can be increased by a factor of three with the moderate reduction of emitted power.
△ Less
Submitted 13 December, 2011;
originally announced December 2011.
-
Influence of the Josephson junction geometry on the spectral properties of the flux-flow oscillator
Authors:
Leonid S. Revin,
Andrey L. Pankratov
Abstract:
Numerical investigation of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator has been done. Using direct simulation of the sine-Gordon equation with account of RC load the spectral and power properties for different current density distributions have been calculated. With discussion of the fundamental differences in the dynamics of the inline and overla…
▽ More
Numerical investigation of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator has been done. Using direct simulation of the sine-Gordon equation with account of RC load the spectral and power properties for different current density distributions have been calculated. With discussion of the fundamental differences in the dynamics of the inline and overlap junctions the various behavior depending on the junction length and noise intensity has been shown.
△ Less
Submitted 14 September, 2011;
originally announced September 2011.
-
Fine tuning of phase qubit parameters for optimization of fast single-pulse readout
Authors:
Leonid S. Revin,
Andrey L. Pankratov
Abstract:
We analyze a two-level quantum system, describing the phase qubit, during a single-pulse readout process by a numerical solution of the time-dependent Schroedinger equation. It has been demonstrated that the readout error has a minimum for certain values of the system`s basic parameters. In particular, the optimization of the qubit capacitance and the readout pulse shape leads to significant reduc…
▽ More
We analyze a two-level quantum system, describing the phase qubit, during a single-pulse readout process by a numerical solution of the time-dependent Schroedinger equation. It has been demonstrated that the readout error has a minimum for certain values of the system`s basic parameters. In particular, the optimization of the qubit capacitance and the readout pulse shape leads to significant reduction of the readout error. It is shown that in an ideal case the fidelity can be increased to almost 97% for 2 ns pulse duration and to 96% for 1 ns pulse duration.
△ Less
Submitted 13 December, 2010;
originally announced December 2010.
