-
One-dimensional non-interacting topological insulators with chiral symmetry
Authors:
Polina Matveeva,
Tyler Hewitt,
Donghao Liu,
Kethan Reddy,
Dmitri Gutman,
Sam T. Carr
Abstract:
We construct microscopical models of one-dimensional non-interacting topological insulators in all of the chiral universality classes. Specifically, we start with a deformation of the Su-Schrieffer-Heeger (SSH) model that breaks time-reversal symmetry, which is in the AIII class. We then couple this model to its time-reversal counterpart in order to build models in the classes BDI, CII, DIII and C…
▽ More
We construct microscopical models of one-dimensional non-interacting topological insulators in all of the chiral universality classes. Specifically, we start with a deformation of the Su-Schrieffer-Heeger (SSH) model that breaks time-reversal symmetry, which is in the AIII class. We then couple this model to its time-reversal counterpart in order to build models in the classes BDI, CII, DIII and CI. We find that the $\mathbb{Z}$ topological index (the winding number) in individual chains is defined only up to a sign. This comes from noticing that changing the sign of the chiral symmetry operator changes the sign of the winding number. The freedom to choose the sign of the chiral symmetry operator on each chain independently allows us to construct two distinct possible chiral symmetry operators when the chains are weakly coupled -- in one case, the total winding number is given by the sum of the winding number of individual chains while in the second case, the difference is taken. We find that the chiral models that belong to $\mathbb{Z}$ classes, AIII, BDI and CII are topologically equivalent, so they can be adiabatically deformed into one another so long as the chiral symmetry is preserved. We study the properties of the edge states in the constructed models and prove that topologically protected edge states must all be localised on the same sublattice (on any given edge). We also discuss the role of particle-hole symmetry on the protection of edge states and explain how it manages to protect edge states in $\mathbb{Z}_2$ classes, where the integer invariant vanishes and chiral symmetry alone does not protect the edge states anymore. We discuss applications of our results to the case of an arbitrary number of coupled chains, construct possible chiral symmetry operators for the multiple chain case, and briefly discuss the generalisation to any odd number of dimensions.
△ Less
Submitted 6 September, 2022;
originally announced September 2022.
-
The rise and sink dependence on the shape of a horizontally wiggling intruder
Authors:
Bitang Kwrung Tripura,
Sonu Kumar,
Vamsi Krishna Reddy Anyam,
K. Anki Reddy
Abstract:
We investigate the effect of shape and orientation for a horizontally oscillating intruder on its vertical dynamics in a granular medium via Discrete Element Method (DEM) simulations. Five distinct intruder shapes were considered in this study: a disk (OS1), a square (OS2), two rectangles with aspect ratio > 1 (OS3) and < 1 (OS4) respectively, and an equilateral triangle (OS5). The vertical veloci…
▽ More
We investigate the effect of shape and orientation for a horizontally oscillating intruder on its vertical dynamics in a granular medium via Discrete Element Method (DEM) simulations. Five distinct intruder shapes were considered in this study: a disk (OS1), a square (OS2), two rectangles with aspect ratio > 1 (OS3) and < 1 (OS4) respectively, and an equilateral triangle (OS5). The vertical velocity of the oscillating object was observed to be a function of amplitude and frequency (f) (inverse of time period (T)) of oscillation, and the shape of the object. The dynamics of the motion are modelled with the help of a cavity based model which can empirically produce the regimes observed by incorporating the free fall of the particles filling the cavity.The cavity based model assumes that there is a point on the surface of each oscillating object unique to its shape that any grain crossing it will irreversibly reach the bottom of the cavity. This leads to the creation of bed of particles at the bottom of the cavity which increases intruder's elevation as it oscillates, leading to its vertical rise in the granular medium. When an intruder oscillates much faster than the falling rate of the grains, the intruder cannot rise up and thus sinks due to energy provided by the oscillation to the bottom layer. On the contrary, if the intruder oscillates too slow, the cavity gets completely filled much before it returns. The maximum rise rate is thus observed at the oscillation time period where the cavity filling time is equal to the half time period of oscillation. In addition, we observed a minimum amplitude (Amin) below which the vertical position of the IO remains unaltered for various T. We have also presented the time-averaged pressure P, velocity V, and area fraction φ fields around the intruder shapes.
△ Less
Submitted 22 July, 2022; v1 submitted 3 July, 2022;
originally announced July 2022.
-
Effects of hydrophobic solute on water normal modes
Authors:
Kambham Devendra Reddy,
Albin Joy,
Rajib Biswas
Abstract:
The vibrational modes of water get significantly modified by external solutes; this becomes particularly important when the solute is hydrophobic. In this work, we examine the effects of a tiny hydrophobe, methane, on the normal modes of water, using small cluster-based harmonic normal mode analysis of aqueous methane system. We estimate the vibrational density of states and also the infrared spec…
▽ More
The vibrational modes of water get significantly modified by external solutes; this becomes particularly important when the solute is hydrophobic. In this work, we examine the effects of a tiny hydrophobe, methane, on the normal modes of water, using small cluster-based harmonic normal mode analysis of aqueous methane system. We estimate the vibrational density of states and also the infrared spectral density. We compare the methane-water data with the bulk water response. We decompose these modes based on different vibrational characters. The stretch-bend decomposition reflects a pronounced coupling between the methane asymmetric stretch mode and the water symmetric stretch mode. We examine the methane-water data in terms of the symmetry of the central water molecule's vibrations and find that asymmetric modes do not contribute. We also find that the vibrational modes having non-zero contributions from methane molecule are extremely localized in nature.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Role of shape on the forces on an intruder moving through a dense granular medium
Authors:
Bitang Kwrung Tripura,
Sonu Kumar,
K. Anki Reddy,
Julian Talbot
Abstract:
We use numerical simulation to investigate the effect an intruder's shape has on the drag and lift forces that it experiences while moving through a granular medium composed of polydisperse disks of mean diameter d. The intruder velocity,v, was varied from 0.1 \sqrt(dg) to 20 \sqrt(dg). For frictionless particles (μ= 0.0)there is a gradual increase in drag force with increasing v, whereas for fric…
▽ More
We use numerical simulation to investigate the effect an intruder's shape has on the drag and lift forces that it experiences while moving through a granular medium composed of polydisperse disks of mean diameter d. The intruder velocity,v, was varied from 0.1 \sqrt(dg) to 20 \sqrt(dg). For frictionless particles (μ= 0.0)there is a gradual increase in drag force with increasing v, whereas for frictional systems (μ= 0.1,0.5) a constant drag regime appears at low velocities. The drag force depends weakly on the shape of the object provided that the cross-section is same. The drag force depends linearly on the immersion depth, while there is very little variation in lift force with depth for certain shapes. The lift experienced by the object is a strong function of its shape at a given velocity. Shape has an effect on the distribution of contacts around the surface of the intruder which may result in a strong lift for certain shapes. We also show the force profiles around the intruder surface.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Granular mixtures discharging through a silo with eccentric orifice location
Authors:
A Vamsi Krishna Reddy,
K. Anki Reddy
Abstract:
We used the discrete element method (DEM) to study the flow dynamics of a mixture of dumbbells and discs for two silo cases: 1. orifice situated on the lateral wall and 2. multiple orifices placed on the base of a two-dimensional silo. The time-averaged flow fields of various parameters like velocity, area fraction, pressure, shear stress etc, obtained from coarse-graining technique are presented…
▽ More
We used the discrete element method (DEM) to study the flow dynamics of a mixture of dumbbells and discs for two silo cases: 1. orifice situated on the lateral wall and 2. multiple orifices placed on the base of a two-dimensional silo. The time-averaged flow fields of various parameters like velocity, area fraction, pressure, shear stress etc, obtained from coarse-graining technique are presented for both the above-mentioned cases. A modified Beverloo scaling is reported for the flow discharging through the lateral orifice. The dynamic friction is found to increase with an increase in the addition of dumbbells. This resulted in a decrease in the flow rate through a lateral orifice with the addition of dumbbells. Self-similar velocity profiles are observed for mixtures for the whole range of lateral orifice widths studied. The flow rate decreases with an increase in the inter-orifice distance L/d for the multiple orifice case. The velocity profile and flow fields revealed an interaction zone between the two orifices at small L/d which is almost absent when the orifices are wide apart. This interaction zone or flow through an orifice influenced by the presence of an adjacent orifice is the reason for a higher velocity above each of the orifices thus resulting in a higher flow rate at small L/d. The stagnant zone between the orifices is found to expand with an increase in the inter-orifice distance which yields in an increase in the shear stress between each of the orifices and the stagnant zone.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Theoretical Spectroscopic Investigation of Hydrogen Bonding and Hydrophobicity
Authors:
Kambham Devendra Reddy,
Rajib Biswas
Abstract:
Hydrophobic solutes significantly alters water hydrogen bond network. The local alteration of solvation struc-tures get reflected in the vibrational spectroscopic signal. Although it is possible to detect this microscopicfeatures by modern infrared spectroscopy, however, bulk phase spectra often comes with formidable challengeof establishing the connection among the experimental spectra to molecul…
▽ More
Hydrophobic solutes significantly alters water hydrogen bond network. The local alteration of solvation struc-tures get reflected in the vibrational spectroscopic signal. Although it is possible to detect this microscopicfeatures by modern infrared spectroscopy, however, bulk phase spectra often comes with formidable challengeof establishing the connection among the experimental spectra to molecular structures. Theoretical spec-troscopy can serve as more powerful tool even where spectroscopic data cannot provide microscopic picture.In the present work, we build a theoretical spectroscopic map based on mixed quantum-classical molecularsimulation approach using methane in water system. The single oscillator level O-H stretch frequency is wellcorrelated with a collective variable solvation energy. We construct the spectroscopic maps for fundamentaltransition frequencies and also the transition dipoles. A bimodal frequency distribution with a blue shiftedpopulation of transition frequency illustrates presence of gas like water molecules in the hydration shell ofmethane. This observation is further complemented by a shell-wise decomposition of the O-H stretch fre-quencies. We observe a significant increase in ordering of the first solvation water except the water molecules,which are directly facing the methane molecule. This is manifested in redshift of the observed transition fre-quencies. Temperature dependent simulations depict that the water molecules facing to the methane moleculebehave similar to the high temperature water and the rest of the first shell water molecules behave more likecold water.
△ Less
Submitted 14 June, 2020;
originally announced June 2020.
-
Effects of particle stiffness on the extensional rheology of model rod-like nanoparticle suspensions
Authors:
Christian Lang,
Jan Hendricks,
Zhenkun Zhang,
Naveen K. Reddy,
Jonathan P. Rothstein,
M. Paul Lettinga,
Jan Vermant,
Christian Clasen
Abstract:
The linear and nonlinear rheological behavior of two rod-like particle suspensions as a function of concentration is studied using small amplitude oscillatory shear, steady shear and capillary breakup extensional rheometry. The rod-like suspensions are composed of fd virus and its mutant fdY21M, which are perfectly monodisperse, with a length on the order of 900 nm. The particles are semi flexible…
▽ More
The linear and nonlinear rheological behavior of two rod-like particle suspensions as a function of concentration is studied using small amplitude oscillatory shear, steady shear and capillary breakup extensional rheometry. The rod-like suspensions are composed of fd virus and its mutant fdY21M, which are perfectly monodisperse, with a length on the order of 900 nm. The particles are semi flexible yet differ in their persistence length. The effect of stiffness on the rheological behavior in both, shear and extensional flow, is investigated experimentally. The linear viscoelastic shear data is compared in detail with theoretical predictions for worm-like chains. The extensional properties are compared to Batchelor's theory, generalized for the shear thinning nature of the suspensions. Theoretical predictions agree well with the measured complex moduli at low concentrations as well as the nonlinear shear and elongational viscosities at high flow rates. The results in this work provide guidelines for enhancing the elongational viscosity based on purely frictional effects in absence of strong normal forces which are characteristic for high molecular weight polymers.
△ Less
Submitted 30 November, 2018;
originally announced November 2018.
-
Particle dynamics and pattern formation in a rotating suspension of positively buoyant particles
Authors:
Sudarshan Konidena,
Jonghoon Lee,
K. Anki Reddy,
Anugrah Singh
Abstract:
Numerical simulations of positively-buoyant suspension in a horizontally rotating cylinder were performed to study the formation of radial and axial patterns. The order parameter for low-frequency segregated phase and dispersed phase is similar to that predicted for the settling suspension by J. Lee, and A. J. C. Ladd [J. Fluid Mech., 577, 2007], which is the average angular velocity of the partic…
▽ More
Numerical simulations of positively-buoyant suspension in a horizontally rotating cylinder were performed to study the formation of radial and axial patterns. The order parameter for low-frequency segregated phase and dispersed phase is similar to that predicted for the settling suspension by J. Lee, and A. J. C. Ladd [J. Fluid Mech., 577, 2007], which is the average angular velocity of the particles. The particle density profiles for axial bands in the buoyancy dominated phase shows an amplitude equivalent to the diameter of the cylinder. Axial density profiles show sinusoidal behaviour for drag dominant phase and oscillating sinusoidal behaviour for centrifugal force dominant phase. Results also indicate that the traveling bands are formed as a consequence of the inhomogeneous distribution of particles arising from a certain imbalance of drag, buoyancy and centrifugal forces. In the centrifugal limit, particles move towards the center of the cylinder aggregating to form a dense core of particles with its axis coinciding with that of the rotating cylinder, a behaviour which is in contrast to the sedimenting particles. The particle distribution patterns obtained from the simulations are found to be in good agreement with the experiments of Kalyankar et al. [Phys. Fluids, 20, 2008].
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Scaling law of the drag force in dense granular media
Authors:
Sonu Kumar,
K. Anki Reddy,
Satoshi Takada,
Hisao Hayakawa
Abstract:
Making use of the system of pulling a spherical intruder in static three-dimensional granular media, we numerically study the scaling law for the drag force $F_{\rm drag}$ acting on the moving intruder under the influence of the gravity. Suppose if the intruder of diameter $D$ immersed in a granular medium consisting of grains of average diameter $d$ is located at a depth $h$ and moves with a spee…
▽ More
Making use of the system of pulling a spherical intruder in static three-dimensional granular media, we numerically study the scaling law for the drag force $F_{\rm drag}$ acting on the moving intruder under the influence of the gravity. Suppose if the intruder of diameter $D$ immersed in a granular medium consisting of grains of average diameter $d$ is located at a depth $h$ and moves with a speed $V$, we find that $F_{\rm drag}$ can be scaled as $(D+d)^{φ_μ} h^{α_μ}$ with two exponents $φ_μ$ and $α_μ$, which depend on the friction coefficient $μ$ and satisfy an approximate sum rule $φ_μ+α_μ\approx 3$. This scaling law is valid for the arbitrary Froude number (defined by $\mathrm{Fr}={2 V}\sqrt{{2D}/{g}}\big/(D+d)$), if $h$ is sufficiently deep. We also identify the existence of three regimes (quasistatic, linear, and quadratic) at least for frictional grains in the velocity dependence of drag force. The crossovers take place at $\mathrm{Fr}\approx 1$ between the quasistatic to the linear regimes and at $\mathrm{Fr}\approx 5$ between the linear to the quadratic regimes. We also observe that Froude numbers at which these crossovers between the regimes happen are independent of the depth $h$ and the diameter of the intruder $D$. We also report the numerical results on the average coordination number of the intruder and average contact angle as functions of intruder velocity.
△ Less
Submitted 12 May, 2020; v1 submitted 25 December, 2017;
originally announced December 2017.
-
Shape dependence of resistance force exerted on an obstacle placed in a gravity-driven granular silo flow
Authors:
H. Katsuragi,
K. Anki Reddy,
K. Endo
Abstract:
Resistance force exerted on an obstacle in a gravity-driven slow granular silo flow is studied by experiments and numerical simulations. In a two-dimensional granular silo, an obstacle is placed just above the exit. Then, steady discharge flow is made and its flow rate can be controlled by the width of exit and the position of obstacle. During the discharge of particles, flow rate and resistance f…
▽ More
Resistance force exerted on an obstacle in a gravity-driven slow granular silo flow is studied by experiments and numerical simulations. In a two-dimensional granular silo, an obstacle is placed just above the exit. Then, steady discharge flow is made and its flow rate can be controlled by the width of exit and the position of obstacle. During the discharge of particles, flow rate and resistance force exerting on the obstacle are measured. Using the obtained data, a dimensionless number characterizing the force balance in granular flow is defined by the relation between the discharge flow rate and resistance-force decreasing rate. The dimensionless number is independent of flow rate. Rather, we find the weak shape dependence of the dimensionless number. This tendency is a unique feature for the resistance force in granular silo flow. It characterizes the effective flow width interacting with the obstacle in granular silo flow.
△ Less
Submitted 8 May, 2018; v1 submitted 2 December, 2017;
originally announced December 2017.
-
Obstacle-shape effect in a two-dimensional granular silo flow field
Authors:
K. Endo,
K. Anki Reddy,
H. Katsuragi
Abstract:
We conducted simple experiment and numerical simulation of two-dimensional granular discharge flow driven by gravity under the influence of an obstacle. According to the previous work (Zuriguel {\it et al.,\,Phys.\,Rev.\,Lett.}\,{\bf 107}: 278001, 2011), the clogging of granular discharge flow can be suppressed by putting a circular obstacle at a proper position. In order to investigate the detail…
▽ More
We conducted simple experiment and numerical simulation of two-dimensional granular discharge flow driven by gravity under the influence of an obstacle. According to the previous work (Zuriguel {\it et al.,\,Phys.\,Rev.\,Lett.}\,{\bf 107}: 278001, 2011), the clogging of granular discharge flow can be suppressed by putting a circular obstacle at a proper position. In order to investigate the details of obstacle effect in granular flow, we focused on particle dynamics in this study. From the experimental and numerical data, we found that the obstacle remarkably affects the horizontal-velocity distribution and packing fraction at the vicinity of the exit. In addition to the circular obstacle, we utilized triangular, inverted-triangular, and horizontal-bar obstacles to discuss the obstacle-shape effect in granular discharge flow. Based on the investigation of dynamical quantities such as velocity distributions, granular temperature, and volume fraction, we found that the triangular obstacle or horizontal bar could be very effective to prevent the clogging. From the obtained result, we consider that the detouring of particles around the obstacle and resultant low packing fraction at the exit region effectively prevent the clogging in a certain class of granular discharge flow.
△ Less
Submitted 15 June, 2017;
originally announced June 2017.
-
Preferential site occupancy of alloying elements in TiAl-based phases
Authors:
David Holec,
Rajeev K. Reddy,
Thomas Klein,
Helmut Clemens
Abstract:
First principles calculations are used to study the preferential occupation of ternary alloying additions into the binary Ti-Al phases, namely $γ$-TiAl, $α_2$-Ti$_3$Al, $β_{\mathrm{o}}$-TiAl, and B19-TiAl. While the early transition metals (TMs, group IVB, VB , and VIB elements) prefer to substitute for Ti atoms in the $γ$-, $α_2$-, and B19-phases, they preferentially occupy Al sites in the…
▽ More
First principles calculations are used to study the preferential occupation of ternary alloying additions into the binary Ti-Al phases, namely $γ$-TiAl, $α_2$-Ti$_3$Al, $β_{\mathrm{o}}$-TiAl, and B19-TiAl. While the early transition metals (TMs, group IVB, VB , and VIB elements) prefer to substitute for Ti atoms in the $γ$-, $α_2$-, and B19-phases, they preferentially occupy Al sites in the $β_{\mathrm{o}}$-TiAl. Si is in this context an anomaly, as it prefers to sit on the Al sublattice for all four phases. B and C are shown to prefer octahedral Ti-rich interstitial positions instead of substitutional incorporation. The site preference energy is linked with the alloying-induced changes of energy of formation, hence alloying-related (de)stabilisation of the phases. We further show that the phase-stabilisation effect of early TMs on $β_{\mathrm{o}}$-phase has a different origin depending on their valency. Finally, an extensive comparison of our predictions with available theoretical and experimental data (which is, however, limited mostly to the $γ$-phase) shows a consistent picture.
△ Less
Submitted 9 May, 2016; v1 submitted 23 December, 2015;
originally announced December 2015.
-
Influence of homo-buffer layer on stress control of sputtered (Ba0.45,Sr0.55)TiO3 thin films on Pt-Si
Authors:
Y. K. Vayunandana Reddy,
Guillaume Guegan,
Mohamed Lamhamdi,
Virginie Grimal,
Patrick Simon
Abstract:
To engineer strain relaxation of sputtered BST thin films on Pt-Si wafers, homo-buffer layer method was applied to eliminate Pt hillock formation. Thin BST homo-buffer layers were deposited at room temperature and subsequently the main BST layer was deposited at 650°C, Pt hillock free BST films were obtained with homo-buffer thickness above 5 nm. Relatively good electrical properties were obtained…
▽ More
To engineer strain relaxation of sputtered BST thin films on Pt-Si wafers, homo-buffer layer method was applied to eliminate Pt hillock formation. Thin BST homo-buffer layers were deposited at room temperature and subsequently the main BST layer was deposited at 650°C, Pt hillock free BST films were obtained with homo-buffer thickness above 5 nm. Relatively good electrical properties were obtained for BST thin films with 15 and 25 nm homo-buffer layer (T= 30 % at 5V and tan δ= 0.018).
△ Less
Submitted 6 September, 2013;
originally announced September 2013.
-
Ultrastrong and Ultrastable Metallic Glass
Authors:
Daisman P. B. Aji,
Akihiko Hirata,
Fan Zhu,
Liu Pan,
K. Madhav Reddy,
Shuangxi Song,
Yanhui Liu,
Takeshi Fujita,
Shinji Kohara,
Mingwei Chen
Abstract:
The lack of thermal stability, originating from their metastable nature, has been one of the paramount obstacles that hinder the wide range of applications of metallic glasses. We report that the stability of a metallic glass can be dramatically improved by slow deposition at high temperatures. The glass transition and crystallization temperatures of the ultrastable metallic glass can be increased…
▽ More
The lack of thermal stability, originating from their metastable nature, has been one of the paramount obstacles that hinder the wide range of applications of metallic glasses. We report that the stability of a metallic glass can be dramatically improved by slow deposition at high temperatures. The glass transition and crystallization temperatures of the ultrastable metallic glass can be increased by 51 K and 203 K, respectively, from its ordinary glass state. The ultrastable metallic glass also shows ultrahigh strength and hardness, over 30 % higher than its ordinary counterpart. Atomic structure characterization reveals that the exceptional properties of the ultrastable glass are associated with abundance of medium range order. The finding of the ultrastable metallic glass sheds light on atomic mechanisms of metallic glass formation and has important impact on the technological applications of metallic glasses.
△ Less
Submitted 6 June, 2013;
originally announced June 2013.
-
Ohmic Contact Formation Between Metal and AlGaN/GaN Heterostructure via Graphene Insertion
Authors:
Pil Sung Park,
Kongara M. Reddy,
Digbijoy N. Nath,
Zhichao Yang,
Nitin P. Padture,
Siddharth Rajan
Abstract:
A simple method for the creation of Ohmic contact to 2-D electron gas (2DEG) in AlGaN/GaN high electron-mobility transistors (HEMTs) using Cr/Graphene layer is demonstrated. A weak temperature dependence of this Ohmic contact observed in the range 77 to 300 K precludes thermionic emission or trap-assisted hopping as possible carrier-transport mechanisms. It is suggested that the Cr/Graphene combin…
▽ More
A simple method for the creation of Ohmic contact to 2-D electron gas (2DEG) in AlGaN/GaN high electron-mobility transistors (HEMTs) using Cr/Graphene layer is demonstrated. A weak temperature dependence of this Ohmic contact observed in the range 77 to 300 K precludes thermionic emission or trap-assisted hopping as possible carrier-transport mechanisms. It is suggested that the Cr/Graphene combination acts akin to a doped n-type semiconductor in contact with AlGaN/GaN heterostructure, and promotes carrier transport along percolating Al-lean paths through the AlGaN layer. This new use of graphene offers a simple and reliable method for making Ohmic contacts to AlGaN/GaN heterostructures, circumventing complex additional processing steps involving high temperatures. These results could have important implications for the fabrication and manufacturing of AlGaN/GaN-based microelectronic and optoelectronic devices/sensors of the future.
△ Less
Submitted 14 February, 2013; v1 submitted 9 January, 2013;
originally announced January 2013.
-
The critical current density of advanced internal-Mg-diffusion-processed MgB2 wires
Authors:
G. Z. Li,
M. D. Sumption,
M. A. Susner,
Y. Yang,
K. M. Reddy,
M. A. Rindfleisch,
M. J. Tomsic,
C. J. Thong,
E. W. Collings
Abstract:
Recent advances in MgB2 conductors are leading to a new level of performance. Based on the use of proper powders, proper chemistry, and an architecture which incorporates internal Mg diffusion (IMD), a dense MgB2 structure with not only a high critical current density Jc, but also a high engineering critical current density, Je, can be obtained. In this paper, a series of these advanced (or second…
▽ More
Recent advances in MgB2 conductors are leading to a new level of performance. Based on the use of proper powders, proper chemistry, and an architecture which incorporates internal Mg diffusion (IMD), a dense MgB2 structure with not only a high critical current density Jc, but also a high engineering critical current density, Je, can be obtained. In this paper, a series of these advanced (or second - generation, "2G") conductors has been prepared. Scanning electron microscopy and associated energy dispersive X-ray spectroscopy were applied to characterize the microstructures and compositions of the wires, and a dense MgB2 layer structure was observed. The best layer Jc for our sample is 1.07x105 A/cm2 at 10 T, 4.2 K, and our best Je is seen to be 1.67x104 A/cm2 at 10 T, 4.2 K. Optimization of the transport properties of these advanced wires is discussed in terms of B-powder choice, area fraction, and the MgB2 layer growth mechanism.
△ Less
Submitted 10 October, 2012; v1 submitted 15 June, 2012;
originally announced June 2012.
-
Comprehensive Control of Optical Polarization Anisotropy in Semiconducting Nanowires
Authors:
Lei Fang,
Xianwei Zhao,
Yi-Hsin Chiu,
Dongkyun Ko,
Kongara M. Reddy,
Nitin P. Padture,
Fengyuan Yang,
Ezekiel Johnston-Halperin
Abstract:
The demonstration of strong photoluminescence polarization anisotropy in semiconducting nanowires embodies both technological promise and scientific challenge. Here we present progress on both fronts through the study of the photoluminescence polarization anisotropy of randomly oriented nanowire ensembles in materials without/with crystalline anisotropy, small/wide bandgap, and both III-V/II-VI ch…
▽ More
The demonstration of strong photoluminescence polarization anisotropy in semiconducting nanowires embodies both technological promise and scientific challenge. Here we present progress on both fronts through the study of the photoluminescence polarization anisotropy of randomly oriented nanowire ensembles in materials without/with crystalline anisotropy, small/wide bandgap, and both III-V/II-VI chemistry (InP/ZnO nanowires, respectively). Comprehensive control of the polarization anisotropy is realized by dielectric matching with conformally deposited Ta2O5 (dielectric ratios of 9.6:4.41 and 4.0:4.41 for InP and ZnO, respectively). After dielectric matching, the polarization anisotropy of the nanowire ensembles is reduced by 86% for InP:Ta2O5 and 84% for ZnO:Ta2O5.
△ Less
Submitted 29 July, 2011;
originally announced August 2011.
-
Defect states and disorder in charge transport in semiconductor nanowires
Authors:
Dongkyun Ko,
X. W. Zhao,
Kongara M. Reddy,
O. D. Restrepo,
R. Mishra,
I. S. Beloborodov,
Nandini Trivedi,
Nitin P. Padture,
W. Windl,
F. Y. Yang,
E. Johnston-Halperin
Abstract:
We present a comprehensive investigation into disorder-mediated charge transport in InP nanowires in the statistical doping regime. At zero gate voltage transport is well described by the space charge limited current model and Efros-Shklovskii variable range hopping, but positive gate voltage (electron accumulation) reveals a previously unexplored regime of nanowire charge transport that is not we…
▽ More
We present a comprehensive investigation into disorder-mediated charge transport in InP nanowires in the statistical doping regime. At zero gate voltage transport is well described by the space charge limited current model and Efros-Shklovskii variable range hopping, but positive gate voltage (electron accumulation) reveals a previously unexplored regime of nanowire charge transport that is not well described by existing theory. The ability to continuously tune between these regimes provides guidance for the extension of existing models and directly informs the design of next-generation nanoscale electronic devices.
△ Less
Submitted 22 June, 2011;
originally announced June 2011.
-
High Quality, Transferable Graphene Grown on Single Crystal Cu(111) Thin Films on Basal-Plane Sapphire
Authors:
Kongara M. Reddy,
Andrew D. Gledhill,
Chun-Hu Chen,
Julie M. Drexler,
Nitin P. Padture
Abstract:
The current method of growing large-area graphene on Cu surfaces (polycrystalline foils and thin films) and its transfer to arbitrary substrates is technologically attractive. However, the quality of graphene can be improved significantly by growing it on single-crystal Cu surfaces. Here we show that high quality, large-area graphene can be grown on epitaxial single-crystal Cu(111) thin films on r…
▽ More
The current method of growing large-area graphene on Cu surfaces (polycrystalline foils and thin films) and its transfer to arbitrary substrates is technologically attractive. However, the quality of graphene can be improved significantly by growing it on single-crystal Cu surfaces. Here we show that high quality, large-area graphene can be grown on epitaxial single-crystal Cu(111) thin films on reusable basal-plane sapphire (alpha-Al2O3(0001)) substrates and then transferred to another substrate. While enabling graphene growth on Cu single-crystal surfaces, this method has the potential to avoid the high cost and extensive damage to graphene associated with sacrificing bulk single-crystal Cu during graphene transfer.
△ Less
Submitted 18 March, 2011; v1 submitted 7 December, 2010;
originally announced December 2010.
-
Frequency dependent negative capacitance of (Ba0.6Sr0.4)(ZrxTi1-x)O3 thin films grown on La0.9Sr1.1NiO4 buffered SrTiO3 substrate
Authors:
Y. K. Vayunandana Reddy,
Jerome Wolfman,
Monique Gervais,
Francois
Abstract:
Ba0.6Sr0.4TiO3 and (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films were deposited on La0.9Sr1.1NiO4 buffered SrTiO3 substrates. (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film (2.77 nF) showed one order large capacitance compared to that of Ba0.6Sr0.4TiO3 film (270 pF) at 100 kHz. (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film showed negative capacitance at f >3 MHz except for f=5.05 to 7.36 MHz, and 10.4 to 13.4 MHz, where it showed p…
▽ More
Ba0.6Sr0.4TiO3 and (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films were deposited on La0.9Sr1.1NiO4 buffered SrTiO3 substrates. (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film (2.77 nF) showed one order large capacitance compared to that of Ba0.6Sr0.4TiO3 film (270 pF) at 100 kHz. (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film showed negative capacitance at f >3 MHz except for f=5.05 to 7.36 MHz, and 10.4 to 13.4 MHz, where it showed positive capacitance. Tunability of the Ba0.6Sr0.4TiO3 film (~15%) is much lower than that of the (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film (30 to 65%, both normal and inverse). A significant change of the tunability was observed at frequencies f>500 kHz for the (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film showing inverse tunability, this can be attributed to the negative capacitance effect, where current lags behind the voltage. (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film (6.87x10-6 A/cm2) showing one order high leakage current density than BST film (1.32x10-7 A/cm2). Ba0.6Sr0.4TiO3 film showed large grain size (140 nm) and surface roughness (11.5 nm) and (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 film showed small grain size (80 nm) and roughness (2.3 nm).
△ Less
Submitted 16 April, 2010; v1 submitted 7 August, 2009;
originally announced August 2009.
-
Electrode effects on electrical properties of polycrystalline (Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films
Authors:
Y. K. Vayunandana Reddy,
Jerome Wolfman,
Monique Gervais,
Francois Gervais
Abstract:
(Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films were grown on IrO2 and Pt coated Si substrates. Film on Pt electrode showed large dielectric dispersion at lower frequency and on other hand film on IrO2 showed dielectric constant almost independent with frequency up to 1 MHz. Tunability (Loss) on Pt and IrO2 at 1 MHz were 55% (0.159) and 45% (0.07), respectively. The FOM is also high for film on IrO2 (620)…
▽ More
(Ba0.6Sr0.4)(Zr0.3Ti0.7)O3 thin films were grown on IrO2 and Pt coated Si substrates. Film on Pt electrode showed large dielectric dispersion at lower frequency and on other hand film on IrO2 showed dielectric constant almost independent with frequency up to 1 MHz. Tunability (Loss) on Pt and IrO2 at 1 MHz were 55% (0.159) and 45% (0.07), respectively. The FOM is also high for film on IrO2 (620) compared on to the Pt (345). Very low leakage current density also obtained on IrO2 (1.3 x 10-6 A/cm2) compared to Pt (6.14x10-3 A/cm2) coated Si substrates.
△ Less
Submitted 16 April, 2010; v1 submitted 5 August, 2009;
originally announced August 2009.
-
Fast decay of the velocity autocorrelation function in dense shear flow of inelastic hard spheres
Authors:
Ashish V. Orpe,
V. Kumaran,
K. Anki Reddy,
Arshad Kudrolli
Abstract:
We find in complementary experiments and event driven simulations of sheared inelastic hard spheres that the velocity autocorrelation function $ψ(t)$ decays much faster than $t^{-3/2}$ obtained for a fluid of elastic spheres at equilibrium. Particle displacements are measured in experiments inside a gravity driven flow sheared by a rough wall. The average packing fraction obtained in the experim…
▽ More
We find in complementary experiments and event driven simulations of sheared inelastic hard spheres that the velocity autocorrelation function $ψ(t)$ decays much faster than $t^{-3/2}$ obtained for a fluid of elastic spheres at equilibrium. Particle displacements are measured in experiments inside a gravity driven flow sheared by a rough wall. The average packing fraction obtained in the experiments is 0.59, and the packing fraction in the simulations is varied between 0.5 and 0.59. The motion is observed to be diffusive over long times except in experiments where there is layering of particles parallel to boundaries, and diffusion is inhibited between layers. Regardless, a rapid decay of $ψ(t)$ is observed, indicating that this is a feature of the sheared dissipative fluid, and is independent of the details of the relative particle arrangements. An important implication of our study is that the non-analytic contribution to the shear stress may not be present in a sheared inelastic fluid, leading to a wider range of applicability of kinetic theory approaches to dense granular matter.
△ Less
Submitted 18 November, 2008;
originally announced November 2008.
-
Bias-controlled sensitivity of ferromagnet/semiconductor electrical spin detectors
Authors:
S. A. Crooker,
E. Garlid,
A. N. Chantis,
D. L. Smith,
K. S. M. Reddy,
Q. Hu,
T. Kondo,
C. J. Palmstrom,
P. A. Crowell
Abstract:
Using Fe/GaAs Schottky tunnel barriers as electrical spin detectors, we show that the magnitude and sign of their spin-detection sensitivities can be widely tuned with the voltage bias applied across the Fe/GaAs interface. Experiments and theory establish that this tunability derives not just simply from the bias dependence of the tunneling conductances $G_{\uparrow,\downarrow}$ (a property of t…
▽ More
Using Fe/GaAs Schottky tunnel barriers as electrical spin detectors, we show that the magnitude and sign of their spin-detection sensitivities can be widely tuned with the voltage bias applied across the Fe/GaAs interface. Experiments and theory establish that this tunability derives not just simply from the bias dependence of the tunneling conductances $G_{\uparrow,\downarrow}$ (a property of the interface), but also from the bias dependence of electric fields in the semiconductor which can dramatically enhance or suppress spin-detection sensitivities. Electrons in GaAs with fixed polarization can therefore be made to induce either positive or negative voltage changes at spin detectors, and some detector sensitivities can be enhanced over ten-fold compared to the usual case of zero-bias spin detection.
△ Less
Submitted 21 July, 2009; v1 submitted 5 September, 2008;
originally announced September 2008.
-
Ageing under stress and mechanical fragility of soft solids of laponite
Authors:
G. Ranjith K. Reddy,
Yogesh M Joshi
Abstract:
In this work, we investigate the ageing behavior of soft glassy solids of aqueous suspension of laponite under shear flow. We observe that when an imposed time is normalized by a dominating relaxation time of the system, the rheological response at different ages shows superposition. Analysis of this behavior suggests that the structural evolution with age under a deformation field, as represent…
▽ More
In this work, we investigate the ageing behavior of soft glassy solids of aqueous suspension of laponite under shear flow. We observe that when an imposed time is normalized by a dominating relaxation time of the system, the rheological response at different ages shows superposition. Analysis of this behavior suggests that the structural evolution with age under a deformation field, as represented by the dependence of dominant relaxation mode on age, becomes weaker as the system becomes progressively less homogeneous due to enhanced attractive interactions caused by addition of salt. Creep-recovery behavior at same elastic modulus shows more viscous dissipation for a system having more salt, demonstrating increase in the mechanical fragility. This study shows that an increase in the concentration of salt, which enhances attractive interactions and causes greater inhomogeneity, leads to a state wherein the particles are held together by weaker interactions. This work leads to important insights into how microstructure affects the ageing dynamics. We discuss the observed behavior in the context of ageing in colloidal glasses and gels of aqueous suspension of laponite.
△ Less
Submitted 22 December, 2008; v1 submitted 30 May, 2008;
originally announced May 2008.
-
Aging in a Colloidal Glass in Creep Flow: Time-Stress Superposition
Authors:
Yogesh M. Joshi,
G. Ranjith,
K. Reddy
Abstract:
In this work, we study ageing behavior of aqueous laponite suspension, a model soft glassy material, in creep. We observe that viscoelastic behavior is time dependent and is strongly influenced by the deformation field; the effect is known to arise due to ageing and rejuvenation. We show that irrespective of strength of deformation field (shear stress) and age, when imposed time-scale is normali…
▽ More
In this work, we study ageing behavior of aqueous laponite suspension, a model soft glassy material, in creep. We observe that viscoelastic behavior is time dependent and is strongly influenced by the deformation field; the effect is known to arise due to ageing and rejuvenation. We show that irrespective of strength of deformation field (shear stress) and age, when imposed time-scale is normalized with dominating relaxation mode of the system, universal ageing behavior is obtained demonstrating time-stress superposition; the phenomena that may be generic in variety of soft materials.
△ Less
Submitted 3 March, 2008; v1 submitted 28 October, 2007;
originally announced October 2007.
-
Rheological Behavior of Aqueous Suspensions of Laponite: New Insights into the Ageing Phenomena
Authors:
Yogesh M Joshi,
G. Ranjith K. Reddy,
Ajit L. Kulkarni,
Nishant Kumar,
Raj P. Chhabra
Abstract:
In this paper, ageing behavior of suspensions of laponite with varying salt concentration is investigated using rheological tools. It is observed that the ageing is accompanied by an increase in the complex viscosity. The succeeding creep experiments performed at various ages showed damped oscillations in the strain. The characteristic time-scale of the damped oscillations, retardation time, sho…
▽ More
In this paper, ageing behavior of suspensions of laponite with varying salt concentration is investigated using rheological tools. It is observed that the ageing is accompanied by an increase in the complex viscosity. The succeeding creep experiments performed at various ages showed damped oscillations in the strain. The characteristic time-scale of the damped oscillations, retardation time, showed a prominent decrease with the age of the system. However, this dependence weakens with an increase in the salt concentration, which is known to change microstructure of the system from glass-like to gel-like. We postulate that a decrease in the retardation time can be represented as a decrease in the viscosity (friction) of the dissipative environment surrounding the arrested entities that opposes elastic deformation of the system. We believe that ageing in colloidal glass leads to a greater ordering that enhances relative spacing between the constituents thereby reducing the frictional resistance. However, since a gel state is inherently different in structure (fractal network) than that of a glass (disordered), ageing in the same does not induce ordering. Consequently, we observe inverse dependence of retardation time on age becoming weaker with an increase in the salt concentration. We analyze these results from a perspective of ageing dynamics of both glass state and gel state of laponite suspensions.
△ Less
Submitted 10 January, 2008; v1 submitted 3 August, 2007;
originally announced August 2007.
